[PATCH V2 1/3] ARM: EXYNOS4: Add TVOUT support for SMDKV310

[Tomasz Stanislawski]

On 09/21/2011 02:06 PM, Kukjin Kim wrote:
> Hatim Ali wrote:
>> Add support for TVOUT on SMDKV310 board.
>>
>> Signed-off-by: Hatim Ali<hatim.rv at samsung.com>
>> ---
>> Changes since V1:
>> Incorporated changes as suggested by Tomasz Stanislawski
>> - Added  GPIO settings for hot-plug detection.
>> - Added setting hdmi and mixer's parent for TV power domain.
>>
>>   arch/arm/mach-exynos4/Kconfig         |    2 ++
>>   arch/arm/mach-exynos4/mach-smdkv310.c |   25
>> +++++++++++++++++++++++++
>>   2 files changed, 27 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig
>> index 3b594fe..0bf0fe04 100644
>> --- a/arch/arm/mach-exynos4/Kconfig
>> +++ b/arch/arm/mach-exynos4/Kconfig
>> @@ -131,6 +131,7 @@ config MACH_SMDKV310
>>   	select S3C_DEV_RTC
>>   	select S3C_DEV_WDT
>>   	select S3C_DEV_I2C1
>> +	select S5P_DEV_I2C_HDMIPHY
>>   	select S5P_DEV_MFC
>>   	select S3C_DEV_HSMMC
>>   	select S3C_DEV_HSMMC1
>> @@ -140,6 +141,7 @@ config MACH_SMDKV310
>>   	select EXYNOS4_DEV_AHCI
>>   	select SAMSUNG_DEV_KEYPAD
>>   	select EXYNOS4_DEV_PD
>> +	select S5P_DEV_TV
>>   	select SAMSUNG_DEV_PWM
>>   	select EXYNOS4_DEV_SYSMMU
>>   	select EXYNOS4_SETUP_FIMD0
>> diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-
>> exynos4/mach-smdkv310.c
>> index 7ce4d8b..50de270 100644
>> --- a/arch/arm/mach-exynos4/mach-smdkv310.c
>> +++ b/arch/arm/mach-exynos4/mach-smdkv310.c
>> @@ -239,6 +239,7 @@ static struct platform_device *smdkv310_devices[]
>> __initdata = {
>>   	&s3c_device_hsmmc2,
>>   	&s3c_device_hsmmc3,
>>   	&s3c_device_i2c1,
>> +	&s5p_device_i2c_hdmiphy,
>>   	&s3c_device_rtc,
>>   	&s3c_device_wdt,
>>   	&exynos4_device_ac97,
>> @@ -262,6 +263,8 @@ static struct platform_device *smdkv310_devices[]
>> __initdata = {
>>   	&smdkv310_lcd_lte480wv,
>>   	&smdkv310_smsc911x,
>>   	&exynos4_device_ahci,
>> +	&s5p_device_hdmi,
>> +	&s5p_device_mixer,
>>   };
>>
>>   static void __init smdkv310_smsc911x_init(void)
>> @@ -298,6 +301,25 @@ static struct platform_pwm_backlight_data
>> smdkv310_bl_data = {
>>   	.pwm_period_ns  = 1000,
>>   };
>>
>> +static void s5p_tv_setup(void)
>> +{
>> +	int ret;
>> +
>> +	/* direct HPD to HDMI chip */
>> +	ret = gpio_request(EXYNOS4_GPX3(7), "hpd-plug");
>> +
>> +	if (!ret) {
Maybe we should generate WARN_ON(1) here. Failure of gpio request 
indicate that
board was configued not correctly.
>> +		gpio_direction_input(EXYNOS4_GPX3(7));
>> +		s3c_gpio_cfgpin_range(EXYNOS4_GPX3(7),
>> +					1, S3C_GPIO_SFN(3));
> Why do you use 's3c_gpio_cfgpin_range()' for just one gpio pin not range...?
>
>> +	} else
>> +		pr_err("Failed to request gpio for hpd: %d\n", ret);
> According to coding style, should be added { and } around above.
>
>> +
>> +	/* setup dependencies between TV devices */
>> +	s5p_device_hdmi.dev.parent =&exynos4_device_pd[PD_TV].dev;
>> +	s5p_device_mixer.dev.parent =&exynos4_device_pd[PD_TV].dev;
>> +}
>> +
>>   static void __init smdkv310_map_io(void)
>>   {
>>   	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
>> @@ -327,6 +349,9 @@ static void __init smdkv310_machine_init(void)
>>   	samsung_bl_set(&smdkv310_bl_gpio_info,&smdkv310_bl_data);
>>   	s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
>>
>> +	s5p_tv_setup();
>> +	s5p_i2c_hdmiphy_set_platdata(NULL);
>> +
>>   	platform_add_devices(smdkv310_devices,
>> ARRAY_SIZE(smdkv310_devices));
>>   	s5p_device_mfc.dev.parent =&exynos4_device_pd[PD_MFC].dev;
>>   }
>> --
>> 1.7.2.3
> Thanks.
>
> Best regards,
> Kgene.
> --
> Kukjin Kim<kgene.kim at samsung.com>, Senior Engineer,
> SW Solution Development Team, Samsung Electronics Co., Ltd.
>
>