[PATCH v7 00/26] gpio/omap: driver cleanup and fixes

[DebBarma, Tarun Kanti]

On Tue, Sep 27, 2011 at 4:40 AM, Kevin Hilman <khilman at ti.com> wrote:
> "DebBarma, Tarun Kanti" <tarun.kanti at ti.com> writes:
>
> [...]
>
>> As pointed out by Kevin, debounce clock was not getting disabled.
>> In my testing I was somehow grepping CORE power domain instead
>> of PER power domain and hence missed it. The fix for the debounce
>> clock issue is at the end of the email.
>>
>> - Have re-based the for_3.2/gpio-cleanup branch against 3.1-rc6.
>> - Dropped [PATCH 26/26] gpio/omap: add dbclk aliases for all gpio modules
>> as suggested by Kevin since it's already taken care by hwmod.
>> - Added the debounce clock fix in the end.
>
> That debounce fix definitely makes things look better, but it's not
> solving the problem...
>
>> With above, PER is hitting low power state in Suspend and Idle path.
>>
>> Have pushed a branch at below URL with mentioned changes.
>> git://gitorious.org/omap-sw-develoment/linux-omap-dev.git
>> for_3.2/kevin/gpio-cleanup
>
> I tested your branch on my 3430/n900 and PER is still not hitting
> retention.  Setting all debounce values in the board file to zero using
> the patch below[1] makes PER hit retention again.
>
> Assuming you don't have an n900 to test with, I suggest you just copy
> the GPIO keys init from board-rx51-peripherals.c (or some of it) into
> the board file you are testing with.
>
> The problem is most likely be related to having more than one GPIO in a
> bank with debounce enabled, or more than one bank with GPIOs enabled and
> your current test is not be catching it.
>
As per commit c8c9fda506945 {OMAP: PM: disable idle on suspend for GPIO
and UART}, the gpio code needs to be fixed once GPIO driver is run-time adapted.
So I did below change as per the commit and now suspend is working fine even
with board files change for debounce functionality. So the last series
+ below one
line change is whats needed for suspend to work. Can you please see if this does
help on your board ?

I am not finished my idle testing yet but just reporting the suspend results.

diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c
index d865033..1957663 100644
--- a/arch/arm/mach-omap2/gpio.c
+++ b/arch/arm/mach-omap2/gpio.c
@@ -148,8 +148,6 @@ static int omap2_gpio_dev_init(struct omap_hwmod
*oh, void *unused)
                return PTR_ERR(od);
        }

-       omap_device_disable_idle_on_suspend(od);
-
        return 0;
 }

--

Regards
Tarun