[PATCH] ARM i.MX gic: add handle_irq function

[Sascha Hauer]

On Sat, Sep 24, 2011 at 01:01:24AM +0800, Shawn Guo wrote:
> This is a plain translation of assembly gic irq handler to C function
> for CONFIG_MULTI_IRQ_HANDLER support on imx family.
> 
> As the speed of gic_handle_irq() is much more important than code
> clean, the patch chooses to plug the ifdef in the function to compile
> out the corresponding codes.
> 
> Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
> ---
> Right, ideally the arch/arm/plat-mxc/gic.c should be merged into
> arch/arm/common/gic.c.  But before rmk asks me to do that, I would
> let it stay in imx platform.
> 
>  arch/arm/plat-mxc/Makefile                   |    2 +-
>  arch/arm/plat-mxc/gic.c                      |   47 ++++++++++++++++++++++++++
>  arch/arm/plat-mxc/include/mach/common.h      |    2 +
>  arch/arm/plat-mxc/include/mach/entry-macro.S |    6 +++
>  4 files changed, 56 insertions(+), 1 deletions(-)
>  create mode 100644 arch/arm/plat-mxc/gic.c
> 
> diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
> index d53c35f..b9f0f5f 100644
> --- a/arch/arm/plat-mxc/Makefile
> +++ b/arch/arm/plat-mxc/Makefile
> @@ -5,7 +5,7 @@
>  # Common support
>  obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o
>  
> -# MX51 uses the TZIC interrupt controller, older platforms use AVIC
> +obj-$(CONFIG_ARM_GIC) += gic.o
>  obj-$(CONFIG_MXC_TZIC) += tzic.o
>  obj-$(CONFIG_MXC_AVIC) += avic.o
>  
> diff --git a/arch/arm/plat-mxc/gic.c b/arch/arm/plat-mxc/gic.c
> new file mode 100644
> index 0000000..487d12c
> --- /dev/null
> +++ b/arch/arm/plat-mxc/gic.c
> @@ -0,0 +1,47 @@
> +/*
> + * Copyright 2011 Freescale Semiconductor, Inc.
> + * Copyright 2011 Linaro Ltd.
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +#include <linux/io.h>
> +#include <asm/localtimer.h>
> +#include <asm/hardware/gic.h>
> +#ifdef CONFIG_SMP
> +#include <asm/smp.h>
> +#endif
> +
> +asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs)
> +{
> +	u32 irqstat, irqnr;
> +
> +	do {
> +		irqstat = readl_relaxed(gic_cpu_base_addr + GIC_CPU_INTACK);
> +		irqnr = irqstat & 0x3ff;
> +		if (irqnr == 1023)
> +			break;
> +
> +		if (irqnr > 29 && irqnr < 1021)
> +			handle_IRQ(irqnr, regs);
> +#ifdef CONFIG_SMP
> +		else if (irqnr < 16) {
> +			writel_relaxed(irqstat, gic_cpu_base_addr +
> +						GIC_CPU_EOI);
> +			do_IPI(irqnr, regs);
> +		}
> +#endif
> +#ifdef CONFIG_LOCAL_TIMERS
> +		else if (irqnr == 29) {
> +			writel_relaxed(irqstat, gic_cpu_base_addr +
> +						GIC_CPU_EOI);
> +			do_local_timer(regs);
> +		}
> +#endif
> +	} while (1);
> +}

Shouldn't this code go to arch/arm/common/gic.c instead? The
corresponding assembly code is generic so I see no reason to make
this i.MX specific.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |