[PATCH v2 3/3] arm: mxs: disable clock-gates when setting saif-clocks
Dong Aisheng
b29396 at freescale.com
Wed Sep 7 09:57:38 EDT 2011
From: Wolfram Sang <w.sang at pengutronix.de>
New divides should only be written when gates are off.
Reported-by: Dong Aisheng <b29396 at freescale.com>
Signed-off-by: Wolfram Sang <w.sang at pengutronix.de>
---
Changes since v1:
* Fix author name. It should be Wolfram Sang. :)
BTW, i did a minus change based on wolfram's patch or the saif will
not work.
Change
+ __raw_writel(clkgate, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs##_SET); \
to
+ __raw_writel(reg & ~clkgate, \
CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
It seemed HW_CLKCTRL_##rs##_SET did not work well.
(i did not find HW_CLKCTRL_SAIFx_SET in spec).
---
arch/arm/mach-mxs/clock-mx28.c | 7 +++++--
arch/arm/mach-mxs/regs-clkctrl-mx28.h | 2 ++
2 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 33cc2ff..c9d0548 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -476,7 +476,7 @@ _CLK_SET_RATE1(xbus_clk, XBUS)
static int name##_set_rate(struct clk *clk, unsigned long rate) \
{ \
u16 div; \
- u32 reg; \
+ u32 reg, clkgate; \
u64 lrate; \
unsigned long parent_rate; \
int i; \
@@ -493,7 +493,8 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \
return -EINVAL; \
\
reg = __raw_readl(CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
- reg &= ~BM_CLKCTRL_##rs##_DIV; \
+ clkgate = reg & BM_CLKCTRL_##rs##_CLKGATE; \
+ reg &= ~(BM_CLKCTRL_##rs##_DIV | BM_CLKCTRL_##rs##_CLKGATE); \
reg |= div << BP_CLKCTRL_##rs##_DIV; \
__raw_writel(reg, CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
\
@@ -506,6 +507,8 @@ static int name##_set_rate(struct clk *clk, unsigned long rate) \
return -ETIMEDOUT; \
} \
\
+ __raw_writel(reg & ~clkgate, \
+ CLKCTRL_BASE_ADDR + HW_CLKCTRL_##rs); \
return 0; \
}
diff --git a/arch/arm/mach-mxs/regs-clkctrl-mx28.h b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
index 7d1b061..08749b3 100644
--- a/arch/arm/mach-mxs/regs-clkctrl-mx28.h
+++ b/arch/arm/mach-mxs/regs-clkctrl-mx28.h
@@ -285,6 +285,7 @@
(((v) << 0) & BM_CLKCTRL_EMI_DIV_EMI)
#define HW_CLKCTRL_SAIF0 (0x00000100)
+#define HW_CLKCTRL_SAIF0_SET (0x00000104)
#define BP_CLKCTRL_SAIF0_CLKGATE 31
#define BM_CLKCTRL_SAIF0_CLKGATE 0x80000000
@@ -296,6 +297,7 @@
(((v) << 0) & BM_CLKCTRL_SAIF0_DIV)
#define HW_CLKCTRL_SAIF1 (0x00000110)
+#define HW_CLKCTRL_SAIF1_SET (0x00000114)
#define BP_CLKCTRL_SAIF1_CLKGATE 31
#define BM_CLKCTRL_SAIF1_CLKGATE 0x80000000
--
1.7.0.4
More information about the linux-arm-kernel
mailing list