[PATCH] ARM: vexpress: initial device tree support
Dave Martin
dave.martin at linaro.org
Wed Sep 21 12:17:28 EDT 2011
On Wed, Sep 21, 2011 at 5:01 PM, Pawel Moll <pawel.moll at arm.com> wrote:
> On Wed, 2011-09-21 at 15:57 +0100, Grant Likely wrote:
>> On Wed, Sep 21, 2011 at 7:24 AM, Rob Herring <robherring2 at gmail.com> wrote:
>> > On 09/21/2011 04:19 AM, Dave Martin wrote:
>> >> * arm,amba-bus -- widely used by other boards and patchsets, but
>> >> seems not to be documented.
>> >>
>> >
>> > This should be dropped. There's not really any bus component to an amba
>> > bus. All the probing info is within the primecell peripherals.
>>
>> No, if it is an AMBA bus, then it is entirely appropriate to declare
>> it as an amba bus, but to also be compatible with "simple-bus". In
>> fact, it would be better to use a compatible string that specifies the
>> specific implementation of AMBA bus since there are several versions
>> of the spec.
>
> Dave asked me about details of the VE implementation. It's
> sort-of-complicated... ;-)
>
> 1. Core talks to Static Memory Controller via AMBA (AXI)
>
> SOC { core --AXI--> SMC }
>
> 2. SMC generates transaction on Static Memory Bus talking to the IO FPGA
>
> tile/motherboard connector { SMC --SMB--> IOFPGA }
>
> 3. Now, depending on the device being accessed:
>
> a) Transactions accessing SMSC9118, ISP1761, NOR Flash and PSRAM are
> routed directly to the devices
>
> IOFPGA { SMB --> SMSC9118 et al. }
>
> b) The rest of the traffic is converted back to AMBA (AHB/APB)
> transactions and sent to the devices connected to internal AMBA matrix.
>
> IOFPGA { SMB --> AHB/APB bus master --AHB/APB--> PL180 }
>
> I don't believe, though, that the DTS must reflect such level of
> details. That's why I think that:
>
> + motherboard {
> + compatible = "simple-bus";
>
> and
>
> + peripherals at 7,00000000 {
> + compatible = "arm,amba-bus", "simple-bus";
>
> is the best description of the reality :-)
I wonder whether an OS will ever need to know this detail.
Am I right in understanding that these buses are just interconnect
logic, with no OS-visible control/configuration interface?
Cheers
---Dave
More information about the linux-arm-kernel
mailing list