[PATCH v2] ASoC: omap: convert per-board modules to platform drivers

[Jassi Brar]

On 9 September 2011 00:35, Mans Rullgard <mans.rullgard at linaro.org> wrote:
> On 8 September 2011 19:17, Jassi Brar <jassisinghbrar at gmail.com> wrote:
>> On Thu, Sep 8, 2011 at 11:04 PM, Mans Rullgard <mans.rullgard at linaro.org> wrote:
>>> This converts the per-board modules to platform drivers for a
>>> device created by in main platform setup.  These drivers call
>>> snd_soc_register_card() directly instead of going via a "soc-audio"
>>> device and the corresponding driver in soc-core.
>>>
>>> Signed-off-by: Mans Rullgard <mans.rullgard at linaro.org>
>>> ---
>>> Platform device names fixed.
>>> N8x0 changed to get clocks before registering card.
>>> ---
>>>  arch/arm/mach-omap2/board-3430sdp.c          |    6 ++
>>>  arch/arm/mach-omap2/board-4430sdp.c          |    6 ++
>>>  arch/arm/mach-omap2/board-am3517evm.c        |    7 +++
>>>  arch/arm/mach-omap2/board-devkit8000.c       |    6 ++
>>>  arch/arm/mach-omap2/board-igep0020.c         |    6 ++
>>>  arch/arm/mach-omap2/board-n8x0.c             |    6 ++
>>>  arch/arm/mach-omap2/board-omap3beagle.c      |    6 ++
>>>  arch/arm/mach-omap2/board-omap3evm.c         |    7 +++
>>>  arch/arm/mach-omap2/board-omap3pandora.c     |    6 ++
>>>  arch/arm/mach-omap2/board-overo.c            |   17 ++++++
>>>  arch/arm/mach-omap2/board-rx51.c             |    6 ++
>>>  arch/arm/mach-omap2/board-zoom-peripherals.c |    6 ++
>>
>> Can't we do by having omap_init_audio() in arch/arm/mach-omap2/devices.c
>> generate a platform device of name depending upon machine_is_* ?
>
> I had the same thought, but I couldn't find a suitable string anywhere.
> Are you suggesting an if(machine_is_foo()) cascade in omap_init_audio()?
Yes. And you could assign same names as you do now in board init files.