[PATCH] merge i.MX3 and i.MX6

[Sascha Hauer]

Signed-off-by: Sascha Hauer <s.hauer at pengutronix.de>
---
 arch/arm/Makefile          |    3 +--
 arch/arm/mach-imx/Kconfig  |    7 +++----
 arch/arm/mach-imx/Makefile |    1 +
 arch/arm/mm/Kconfig        |    4 ++--
 arch/arm/plat-mxc/Kconfig  |   14 ++++++--------
 5 files changed, 13 insertions(+), 16 deletions(-)

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 89be85d..42ab385 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -155,9 +155,8 @@ machine-$(CONFIG_ARCH_MMP)		:= mmp
 machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_IMX_V4_V5)	:= imx
-machine-$(CONFIG_ARCH_MX3)		:= imx
+machine-$(CONFIG_ARCH_IMX_V6_V7)	:= imx
 machine-$(CONFIG_ARCH_MX5)		:= mx5
-machine-$(CONFIG_ARCH_MX6)		:= imx
 machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 3852f45..27355cb 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -74,6 +74,7 @@ config SOC_IMX31
 	select ARCH_MXC_AUDMUX_V2
 	select ARCH_MX31
 	select MXC_AVIC
+	select SMP_ON_UP if SMP
 
 config SOC_IMX35
 	bool
@@ -83,6 +84,7 @@ config SOC_IMX35
 	select HAVE_EPIT
 	select ARCH_MX35
 	select MXC_AVIC
+	select SMP_ON_UP if SMP
 
 
 if ARCH_IMX_V4_V5
@@ -351,7 +353,7 @@ config MACH_IMX27IPCAM
 
 endif
 
-if ARCH_MX3
+if ARCH_IMX_V6_V7
 
 comment "MX31 platforms:"
 
@@ -601,9 +603,6 @@ config MACH_VPR200
 	  Include support for VPR200 platform. This includes specific
 	  configurations for the board and its peripherals.
 
-endif
-
-if ARCH_MX6
 comment "i.MX6 family:"
 
 config SOC_IMX6Q
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index aa1cf0c..b9dffe5 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -66,6 +66,7 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
+AFLAGS_head-v7.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_CPU_V7) += head-v7.o
 obj-$(CONFIG_SMP) += platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index c3ce146..9ab5be0 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -819,10 +819,10 @@ config CACHE_FEROCEON_L2_WRITETHROUGH
 config CACHE_L2X0
 	bool "Enable the L2x0 outer cache controller"
 	depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \
-		   REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \
+		   REALVIEW_EB_A9MP || ARCH_IMX_V6_V7 || MACH_REALVIEW_PBX || \
 		   ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \
 		   ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \
-		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX || ARCH_MX6
+		   ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX
 	default y
 	select OUTER_CACHE
 	select OUTER_CACHE_SYNC
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index 82b0d92..43efc3c 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -16,10 +16,13 @@ config ARCH_IMX_V4_V5
 	  This enables support for systems based on the Freescale i.MX ARMv4
 	  and ARMv5 SoCs
 
-config ARCH_MX3
-	bool "MX3-based"
+config ARCH_IMX_V6_V7
+	bool "i.MX3, i.MX6"
+	select AUTO_ZRELADDR
+	select ARM_PATCH_PHYS_VIRT
 	help
-	  This enables support for systems based on the Freescale i.MX3 family
+	  This enables support for systems based on the Freescale i.MX3 and i.MX6
+	  family.
 
 config ARCH_MX5
 	bool "i.MX50, i.MX51, i.MX53"
@@ -29,11 +32,6 @@ config ARCH_MX5
 	  This enables support for machines using Freescale's i.MX50 and i.MX51
 	  processors.
 
-config ARCH_MX6
-	bool "i.MX6"
-	help
-	  This enables support for systems based on the Freescale i.MX6 family
-
 endchoice
 
 source "arch/arm/mach-imx/Kconfig"
-- 
1.7.6.3

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |