[PATCH 07/11] ARM: pm: only use preallocated page table during resume
Russell King - ARM Linux
linux at arm.linux.org.uk
Thu Sep 1 08:50:39 EDT 2011
Only use the preallocated page table during the resume, not while
suspending. This avoids the overhead of having to switch unnecessarily
to the resume page table in the suspend path.
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
arch/arm/kernel/sleep.S | 19 +++++++++----------
arch/arm/kernel/suspend.c | 14 ++++++++------
arch/arm/mm/proc-arm920.S | 17 ++++++++---------
arch/arm/mm/proc-arm926.S | 17 ++++++++---------
arch/arm/mm/proc-sa1100.S | 21 ++++++++++-----------
arch/arm/mm/proc-v6.S | 31 ++++++++++++++++---------------
arch/arm/mm/proc-v7.S | 33 +++++++++++++++++----------------
arch/arm/mm/proc-xsc3.S | 22 +++++++++++-----------
arch/arm/mm/proc-xscale.S | 21 ++++++++++-----------
9 files changed, 97 insertions(+), 98 deletions(-)
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index 8cf13de..25d42df 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -9,12 +9,14 @@
/*
* Save CPU state for a suspend
+ * r0 = phys addr of temporary page tables
* r1 = v:p offset
* r2 = suspend function arg0
* r3 = suspend function
*/
ENTRY(__cpu_suspend)
stmfd sp!, {r4 - r11, lr}
+ mov r4, r0
#ifdef MULTI_CPU
ldr r10, =processor
ldr r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state
@@ -27,7 +29,7 @@ ENTRY(__cpu_suspend)
sub sp, sp, r5 @ allocate CPU state on stack
mov r0, sp @ save pointer to CPU save block
add ip, ip, r1 @ convert resume fn to phys
- stmfd sp!, {r6, ip} @ save virt SP, phys resume fn
+ stmfd sp!, {r4, r6, ip} @ save phys pgd, virt SP, phys resume fn
ldr r5, =sleep_save_sp
add r6, sp, r1 @ convert SP to phys
stmfd sp!, {r2, r3} @ save suspend func arg and pointer
@@ -60,7 +62,7 @@ ENDPROC(__cpu_suspend)
.ltorg
cpu_suspend_abort:
- ldmia sp!, {r2 - r3} @ pop virt SP, phys resume fn
+ ldmia sp!, {r1 - r3} @ pop phys pgd, virt SP, phys resume fn
teq r0, #0
moveq r0, #1 @ force non-zero value
mov sp, r2
@@ -69,9 +71,6 @@ ENDPROC(cpu_suspend_abort)
/*
* r0 = control register value
- * r1 = v:p offset (preserved by cpu_do_resume)
- * r2 = phys page table base
- * r3 = L1 section flags
*/
ENTRY(cpu_resume_mmu)
ldr r3, =cpu_resume_after_mmu
@@ -112,11 +111,11 @@ ENTRY(cpu_resume)
ldr r0, sleep_save_sp @ stack phys addr
#endif
setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off
- @ load stack, resume fn
- ARM( ldmia r0!, {sp, pc} )
-THUMB( ldmia r0!, {r2, r3} )
-THUMB( mov sp, r2 )
-THUMB( bx r3 )
+ @ load phys pgd, stack, resume fn
+ ARM( ldmia r0!, {r1, sp, pc} )
+THUMB( ldmia r0!, {r1, r2, r3} )
+THUMB( mov sp, r2 )
+THUMB( bx r3 )
ENDPROC(cpu_resume)
sleep_save_sp:
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c
index 4d9ac3d..7606122 100644
--- a/arch/arm/kernel/suspend.c
+++ b/arch/arm/kernel/suspend.c
@@ -24,13 +24,15 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long))
return -EINVAL;
/*
- * Temporarily switch the page tables to our suspend page
- * tables, which contain the temporary identity mapping
- * required for resuming.
+ * Provide a temporary page table with an identity mapping for
+ * the MMU-enable code, required for resuming. On successful
+ * resume (indicated by a zero return code), we need to switch
+ * back to the correct page tables.
*/
- cpu_switch_mm(suspend_pgd, mm);
- ret = __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn);
- cpu_switch_mm(mm->pgd, mm);
+ ret = __cpu_suspend(virt_to_phys(suspend_pgd),
+ PHYS_OFFSET - PAGE_OFFSET, arg, fn);
+ if (ret == 0)
+ cpu_switch_mm(mm->pgd, mm);
return ret;
}
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 035d57b..88fb3d9 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -379,27 +379,26 @@ ENTRY(cpu_arm920_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm920_suspend_size
-.equ cpu_arm920_suspend_size, 4 * 4
+.equ cpu_arm920_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm920_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ TTB address
- mrc p15, 0, r7, c1, c0, 0 @ Control register
- stmia r0, {r4 - r7}
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r6, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r6}
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_arm920_do_suspend)
ENTRY(cpu_arm920_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
- ldmia r0, {r4 - r7}
+ ldmia r0, {r4 - r6}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ TTB address
- mov r0, r7 @ control register
+ mcr p15, 0, r1, c2, c0, 0 @ TTB address
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_arm920_do_resume)
#endif
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 48add84..9f8fd91 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -394,27 +394,26 @@ ENTRY(cpu_arm926_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm926_suspend_size
-.equ cpu_arm926_suspend_size, 4 * 4
+.equ cpu_arm926_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_arm926_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID
mrc p15, 0, r5, c3, c0, 0 @ Domain ID
- mrc p15, 0, r6, c2, c0, 0 @ TTB address
- mrc p15, 0, r7, c1, c0, 0 @ Control register
- stmia r0, {r4 - r7}
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r6, c1, c0, 0 @ Control register
+ stmia r0, {r4 - r6}
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_arm926_do_suspend)
ENTRY(cpu_arm926_do_resume)
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I+D caches
- ldmia r0, {r4 - r7}
+ ldmia r0, {r4 - r6}
mcr p15, 0, r4, c13, c0, 0 @ PID
mcr p15, 0, r5, c3, c0, 0 @ Domain ID
- mcr p15, 0, r6, c2, c0, 0 @ TTB address
- mov r0, r7 @ control register
+ mcr p15, 0, r1, c2, c0, 0 @ TTB address
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_arm926_do_resume)
#endif
diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S
index 52f73fb..7d91545 100644
--- a/arch/arm/mm/proc-sa1100.S
+++ b/arch/arm/mm/proc-sa1100.S
@@ -168,20 +168,19 @@ ENTRY(cpu_sa1100_set_pte_ext)
mov pc, lr
.globl cpu_sa1100_suspend_size
-.equ cpu_sa1100_suspend_size, 4*4
+.equ cpu_sa1100_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_sa1100_do_suspend)
- stmfd sp!, {r4 - r7, lr}
+ stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c3, c0, 0 @ domain ID
- mrc p15, 0, r5, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r6, c13, c0, 0 @ PID
- mrc p15, 0, r7, c1, c0, 0 @ control reg
- stmia r0, {r4 - r7} @ store cp regs
- ldmfd sp!, {r4 - r7, pc}
+ mrc p15, 0, r5, c13, c0, 0 @ PID
+ mrc p15, 0, r6, c1, c0, 0 @ control reg
+ stmia r0, {r4 - r6} @ store cp regs
+ ldmfd sp!, {r4 - r6, pc}
ENDPROC(cpu_sa1100_do_suspend)
ENTRY(cpu_sa1100_do_resume)
- ldmia r0, {r4 - r7} @ load cp regs
+ ldmia r0, {r4 - r6} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs
mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache
@@ -189,9 +188,9 @@ ENTRY(cpu_sa1100_do_resume)
mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB
mcr p15, 0, r4, c3, c0, 0 @ domain ID
- mcr p15, 0, r5, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r6, c13, c0, 0 @ PID
- mov r0, r7 @ control register
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r5, c13, c0, 0 @ PID
+ mov r0, r6 @ control register
b cpu_resume_mmu
ENDPROC(cpu_sa1100_do_resume)
#endif
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 414e369..2e27b46 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -128,20 +128,19 @@ ENTRY(cpu_v6_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
.globl cpu_v6_suspend_size
-.equ cpu_v6_suspend_size, 4 * 8
+.equ cpu_v6_suspend_size, 4 * 7
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_v6_do_suspend)
- stmfd sp!, {r4 - r11, lr}
+ stmfd sp!, {r4 - r10, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
mrc p15, 0, r5, c13, c0, 1 @ Context ID
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
- mrc p15, 0, r7, c2, c0, 0 @ Translation table base 0
- mrc p15, 0, r8, c2, c0, 1 @ Translation table base 1
- mrc p15, 0, r9, c1, c0, 1 @ auxiliary control register
- mrc p15, 0, r10, c1, c0, 2 @ co-processor access control
- mrc p15, 0, r11, c1, c0, 0 @ control register
- stmia r0, {r4 - r11}
- ldmfd sp!, {r4- r11, pc}
+ mrc p15, 0, r7, c2, c0, 1 @ Translation table base 1
+ mrc p15, 0, r8, c1, c0, 1 @ auxiliary control register
+ mrc p15, 0, r9, c1, c0, 2 @ co-processor access control
+ mrc p15, 0, r10, c1, c0, 0 @ control register
+ stmia r0, {r4 - r10}
+ ldmfd sp!, {r4- r10, pc}
ENDPROC(cpu_v6_do_suspend)
ENTRY(cpu_v6_do_resume)
@@ -150,17 +149,19 @@ ENTRY(cpu_v6_do_resume)
mcr p15, 0, ip, c7, c5, 0 @ invalidate I cache
mcr p15, 0, ip, c7, c15, 0 @ clean+invalidate cache
mcr p15, 0, ip, c7, c10, 4 @ drain write buffer
- ldmia r0, {r4 - r11}
+ ldmia r0, {r4 - r10}
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
mcr p15, 0, r5, c13, c0, 1 @ Context ID
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
- mcr p15, 0, r7, c2, c0, 0 @ Translation table base 0
- mcr p15, 0, r8, c2, c0, 1 @ Translation table base 1
- mcr p15, 0, r9, c1, c0, 1 @ auxiliary control register
- mcr p15, 0, r10, c1, c0, 2 @ co-processor access control
+ ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
+ ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
+ mcr p15, 0, r1, c2, c0, 0 @ Translation table base 0
+ mcr p15, 0, r7, c2, c0, 1 @ Translation table base 1
+ mcr p15, 0, r8, c1, c0, 1 @ auxiliary control register
+ mcr p15, 0, r9, c1, c0, 2 @ co-processor access control
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mcr p15, 0, ip, c7, c5, 4 @ ISB
- mov r0, r11 @ control register
+ mov r0, r10 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v6_do_resume)
#endif
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 21d6910..b56004f 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -217,22 +217,21 @@ ENDPROC(cpu_v7_set_pte_ext)
/* Suspend/resume support: derived from arch/arm/mach-s5pv210/sleep.S */
.globl cpu_v7_suspend_size
-.equ cpu_v7_suspend_size, 4 * 9
+.equ cpu_v7_suspend_size, 4 * 8
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_v7_do_suspend)
- stmfd sp!, {r4 - r11, lr}
+ stmfd sp!, {r4 - r10, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID
mrc p15, 0, r5, c13, c0, 1 @ Context ID
mrc p15, 0, r6, c13, c0, 3 @ User r/o thread ID
stmia r0!, {r4 - r6}
mrc p15, 0, r6, c3, c0, 0 @ Domain ID
- mrc p15, 0, r7, c2, c0, 0 @ TTB 0
- mrc p15, 0, r8, c2, c0, 1 @ TTB 1
- mrc p15, 0, r9, c1, c0, 0 @ Control register
- mrc p15, 0, r10, c1, c0, 1 @ Auxiliary control register
- mrc p15, 0, r11, c1, c0, 2 @ Co-processor access control
- stmia r0, {r6 - r11}
- ldmfd sp!, {r4 - r11, pc}
+ mrc p15, 0, r7, c2, c0, 1 @ TTB 1
+ mrc p15, 0, r8, c1, c0, 0 @ Control register
+ mrc p15, 0, r9, c1, c0, 1 @ Auxiliary control register
+ mrc p15, 0, r10, c1, c0, 2 @ Co-processor access control
+ stmia r0, {r6 - r10}
+ ldmfd sp!, {r4 - r10, pc}
ENDPROC(cpu_v7_do_suspend)
ENTRY(cpu_v7_do_resume)
@@ -243,22 +242,24 @@ ENTRY(cpu_v7_do_resume)
mcr p15, 0, r4, c13, c0, 0 @ FCSE/PID
mcr p15, 0, r5, c13, c0, 1 @ Context ID
mcr p15, 0, r6, c13, c0, 3 @ User r/o thread ID
- ldmia r0, {r6 - r11}
+ ldmia r0, {r6 - r10}
mcr p15, 0, r6, c3, c0, 0 @ Domain ID
- mcr p15, 0, r7, c2, c0, 0 @ TTB 0
- mcr p15, 0, r8, c2, c0, 1 @ TTB 1
+ ALT_SMP(orr r1, r1, #TTB_FLAGS_SMP)
+ ALT_UP(orr r1, r1, #TTB_FLAGS_UP)
+ mcr p15, 0, r1, c2, c0, 0 @ TTB 0
+ mcr p15, 0, r7, c2, c0, 1 @ TTB 1
mcr p15, 0, ip, c2, c0, 2 @ TTB control register
mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register
- teq r4, r10 @ Is it already set?
- mcrne p15, 0, r10, c1, c0, 1 @ No, so write it
- mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control
+ teq r4, r9 @ Is it already set?
+ mcrne p15, 0, r9, c1, c0, 1 @ No, so write it
+ mcr p15, 0, r10, c1, c0, 2 @ Co-processor access control
ldr r4, =PRRR @ PRRR
ldr r5, =NMRR @ NMRR
mcr p15, 0, r4, c10, c2, 0 @ write PRRR
mcr p15, 0, r5, c10, c2, 1 @ write NMRR
isb
dsb
- mov r0, r9 @ control register
+ mov r0, r8 @ control register
b cpu_resume_mmu
ENDPROC(cpu_v7_do_resume)
#endif
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index efd4949..abf0507 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -406,24 +406,23 @@ ENTRY(cpu_xsc3_set_pte_ext)
.align
.globl cpu_xsc3_suspend_size
-.equ cpu_xsc3_suspend_size, 4 * 7
+.equ cpu_xsc3_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xsc3_do_suspend)
- stmfd sp!, {r4 - r10, lr}
+ stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
- mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg
- mrc p15, 0, r10, c1, c0, 0 @ control reg
+ mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
+ mrc p15, 0, r9, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
- stmia r0, {r4 - r10} @ store cp regs
- ldmia sp!, {r4 - r10, pc}
+ stmia r0, {r4 - r9} @ store cp regs
+ ldmia sp!, {r4 - r9, pc}
ENDPROC(cpu_xsc3_do_suspend)
ENTRY(cpu_xsc3_do_resume)
- ldmia r0, {r4 - r10} @ load cp regs
+ ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer
@@ -433,9 +432,10 @@ ENTRY(cpu_xsc3_do_resume)
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
- mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r9, c1, c0, 1 @ auxiliary control reg
- mov r0, r10 @ control register
+ orr r1, r1, #0x18 @ cache the page table in L2
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
+ mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_xsc3_do_resume)
#endif
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index 37dbada..3277904 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -520,24 +520,23 @@ ENTRY(cpu_xscale_set_pte_ext)
.align
.globl cpu_xscale_suspend_size
-.equ cpu_xscale_suspend_size, 4 * 7
+.equ cpu_xscale_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
ENTRY(cpu_xscale_do_suspend)
- stmfd sp!, {r4 - r10, lr}
+ stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
- mrc p15, 0, r8, c2, c0, 0 @ translation table base addr
- mrc p15, 0, r9, c1, c1, 0 @ auxiliary control reg
- mrc p15, 0, r10, c1, c0, 0 @ control reg
+ mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg
+ mrc p15, 0, r9, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
- stmia r0, {r4 - r10} @ store cp regs
- ldmfd sp!, {r4 - r10, pc}
+ stmia r0, {r4 - r9} @ store cp regs
+ ldmfd sp!, {r4 - r9, pc}
ENDPROC(cpu_xscale_do_suspend)
ENTRY(cpu_xscale_do_resume)
- ldmia r0, {r4 - r10} @ load cp regs
+ ldmia r0, {r4 - r9} @ load cp regs
mov ip, #0
mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB
@@ -545,9 +544,9 @@ ENTRY(cpu_xscale_do_resume)
mcr p15, 0, r5, c15, c1, 0 @ CP access reg
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
- mcr p15, 0, r8, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r9, c1, c1, 0 @ auxiliary control reg
- mov r0, r10 @ control register
+ mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
+ mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg
+ mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_xscale_do_resume)
#endif
--
1.7.4.4
More information about the linux-arm-kernel
mailing list