[PATCH v3 1/6] arm/imx6q: add device tree source
Shawn Guo
shawn.guo at linaro.org
Mon Sep 26 03:20:46 EDT 2011
It adds device tree source and documentation for imx6q platform.
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
Documentation/devicetree/bindings/arm/fsl.txt | 6 +
arch/arm/boot/dts/imx6q-sabreauto.dts | 82 ++++
arch/arm/boot/dts/imx6q.dtsi | 555 +++++++++++++++++++++++++
3 files changed, 643 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/fsl.txt
create mode 100644 arch/arm/boot/dts/imx6q-sabreauto.dts
create mode 100644 arch/arm/boot/dts/imx6q.dtsi
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
new file mode 100644
index 0000000..345bfc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -0,0 +1,6 @@
+Freescale i.MX Platforms Device Tree Bindings
+-----------------------------------------------
+
+i.MX6 Quad SABRE Automotive Board
+Required root node properties:
+ - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
diff --git a/arch/arm/boot/dts/imx6q-sabreauto.dts b/arch/arm/boot/dts/imx6q-sabreauto.dts
new file mode 100644
index 0000000..7dd93e8
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabreauto.dts
@@ -0,0 +1,82 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+ model = "Freescale i.MX6 Quad SABRE Automotive Board";
+ compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
+ chosen {
+ bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
+ };
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ clkl {
+ compatible = "fsl,imx6q-clkl", "fixed-clock";
+ clock-frequency = <32768>;
+ };
+
+ clkh {
+ compatible = "fsl,imx6q-clkh", "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ osc {
+ compatible = "fsl,imx6q-osc", "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+ };
+
+ soc {
+ aips-bus at 02100000 { /* AIPS2 */
+ enet at 02188000 {
+ phy-mode = "rgmii";
+ local-mac-address = [00 04 9F 01 1B 61];
+ status = "okay";
+ };
+
+ usdhc at 02198000 { /* uSDHC3 */
+ cd-gpios = <&gpio5 11 0>; /* GPIO6_11 */
+ wp-gpios = <&gpio5 14 0>; /* GPIO6_14 */
+ status = "okay";
+ };
+
+ usdhc at 0219c000 { /* uSDHC4 */
+ fsl,card-wired;
+ status = "okay";
+ };
+
+ uart3: uart at 021f0000 { /* UART4 */
+ status = "okay";
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ debug-led {
+ label = "Heartbeat";
+ gpios = <&gpio2 25 0>; /* GPIO3_25 */
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
new file mode 100644
index 0000000..843e545
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -0,0 +1,555 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu at 1 {
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu at 2 {
+ compatible = "arm,cortex-a9";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu at 3 {
+ compatible = "arm,cortex-a9";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ intc: interrupt-controller at 00a01000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-controller;
+ reg = <0x00a01000 0x1000>,
+ <0x00a00100 0x100>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ timer at 00a00600 {
+ compatible = "arm,smp-twd";
+ reg = <0x00a00600 0x100>;
+ interrupts = <1 13 0xf4>;
+ };
+
+ L2: l2-cache at 00a02000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x00a02000 0x1000>;
+ interrupts = <0 92 0x04>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ aips-bus at 02000000 { /* AIPS1 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x100000>;
+ ranges;
+
+ spba-bus at 02000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02000000 0x40000>;
+ ranges;
+
+ spdif at 02004000 {
+ reg = <0x02004000 0x4000>;
+ interrupts = <0 52 0x04>;
+ };
+
+ ecspi at 02008000 { /* eCSPI1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02008000 0x4000>;
+ interrupts = <0 31 0x04>;
+ status = "disabled";
+ };
+
+ ecspi at 0200c000 { /* eCSPI2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x0200c000 0x4000>;
+ interrupts = <0 32 0x04>;
+ status = "disabled";
+ };
+
+ ecspi at 02010000 { /* eCSPI3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02010000 0x4000>;
+ interrupts = <0 33 0x04>;
+ status = "disabled";
+ };
+
+ ecspi at 02014000 { /* eCSPI4 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02014000 0x4000>;
+ interrupts = <0 34 0x04>;
+ status = "disabled";
+ };
+
+ ecspi at 02018000 { /* eCSPI5 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
+ reg = <0x02018000 0x4000>;
+ interrupts = <0 35 0x04>;
+ status = "disabled";
+ };
+
+ uart0: uart at 02020000 { /* UART1 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x02020000 0x4000>;
+ interrupts = <0 26 0x04>;
+ status = "disabled";
+ };
+
+ esai at 02024000 {
+ reg = <0x02024000 0x4000>;
+ interrupts = <0 51 0x04>;
+ };
+
+ ssi at 02028000 { /* SSI1 */
+ reg = <0x02028000 0x4000>;
+ interrupts = <0 46 0x04>;
+ };
+
+ ssi at 0202c000 { /* SSI2 */
+ reg = <0x0202c000 0x4000>;
+ interrupts = <0 47 0x04>;
+ };
+
+ ssi at 02030000 { /* SSI3 */
+ reg = <0x02030000 0x4000>;
+ interrupts = <0 48 0x04>;
+ };
+
+ asrc at 02034000 {
+ reg = <0x02034000 0x4000>;
+ interrupts = <0 50 0x04>;
+ };
+
+ spba at 0203c000 {
+ reg = <0x0203c000 0x4000>;
+ };
+ };
+
+ vpu at 02040000 {
+ reg = <0x02040000 0x3c000>;
+ interrupts = <0 3 0x04 0 12 0x04>;
+ };
+
+ aipstz at 0207c000 { /* AIPSTZ1 */
+ reg = <0x0207c000 0x4000>;
+ };
+
+ pwm at 02080000 { /* PWM1 */
+ reg = <0x02080000 0x4000>;
+ interrupts = <0 83 0x04>;
+ };
+
+ pwm at 02084000 { /* PWM2 */
+ reg = <0x02084000 0x4000>;
+ interrupts = <0 84 0x04>;
+ };
+
+ pwm at 02088000 { /* PWM3 */
+ reg = <0x02088000 0x4000>;
+ interrupts = <0 85 0x04>;
+ };
+
+ pwm at 0208c000 { /* PWM4 */
+ reg = <0x0208c000 0x4000>;
+ interrupts = <0 86 0x04>;
+ };
+
+ flexcan at 02090000 { /* CAN1 */
+ reg = <0x02090000 0x4000>;
+ interrupts = <0 110 0x04>;
+ };
+
+ flexcan at 02094000 { /* CAN2 */
+ reg = <0x02094000 0x4000>;
+ interrupts = <0 111 0x04>;
+ };
+
+ gpt at 02098000 {
+ compatible = "fsl,imx6q-gpt";
+ reg = <0x02098000 0x4000>;
+ interrupts = <0 55 0x04>;
+ };
+
+ gpio0: gpio at 0209c000 { /* GPIO1 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x0209c000 0x4000>;
+ interrupts = <0 66 0x04 0 67 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio1: gpio at 020a0000 { /* GPIO2 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a0000 0x4000>;
+ interrupts = <0 68 0x04 0 69 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio2: gpio at 020a4000 { /* GPIO3 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a4000 0x4000>;
+ interrupts = <0 70 0x04 0 71 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio3: gpio at 020a8000 { /* GPIO4 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020a8000 0x4000>;
+ interrupts = <0 72 0x04 0 73 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio4: gpio at 020ac000 { /* GPIO5 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020ac000 0x4000>;
+ interrupts = <0 74 0x04 0 75 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio5: gpio at 020b0000 { /* GPIO6 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020b0000 0x4000>;
+ interrupts = <0 76 0x04 0 77 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gpio6: gpio at 020b4000 { /* GPIO7 */
+ compatible = "fsl,imx6q-gpio", "fsl,imx31-gpio";
+ reg = <0x020b4000 0x4000>;
+ interrupts = <0 78 0x04 0 79 0x04>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ kpp at 020b8000 {
+ reg = <0x020b8000 0x4000>;
+ interrupts = <0 82 0x04>;
+ };
+
+ wdog at 020bc000 { /* WDOG1 */
+ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+ reg = <0x020bc000 0x4000>;
+ interrupts = <0 80 0x04>;
+ status = "disabled";
+ };
+
+ wdog at 020c0000 { /* WDOG2 */
+ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
+ reg = <0x020c0000 0x4000>;
+ interrupts = <0 81 0x04>;
+ status = "disabled";
+ };
+
+ ccm at 020c4000 {
+ compatible = "fsl,imx6q-ccm";
+ reg = <0x020c4000 0x4000>;
+ interrupts = <0 87 0x04 0 88 0x04>;
+ };
+
+ anatop at 020c8000 {
+ compatible = "fsl,imx6q-anatop";
+ reg = <0x020c8000 0x1000>;
+ interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+ };
+
+ usbphy at 020c9000 { /* USBPHY1 */
+ reg = <0x020c9000 0x1000>;
+ interrupts = <0 44 0x04>;
+ };
+
+ usbphy at 020ca000 { /* USBPHY2 */
+ reg = <0x020ca000 0x1000>;
+ interrupts = <0 45 0x04>;
+ };
+
+ snvs at 020cc000 {
+ reg = <0x020cc000 0x4000>;
+ interrupts = <0 19 0x04 0 20 0x04>;
+ };
+
+ epit at 020d0000 { /* EPIT1 */
+ reg = <0x020d0000 0x4000>;
+ interrupts = <0 56 0x04>;
+ };
+
+ epit at 020d4000 { /* EPIT2 */
+ reg = <0x020d4000 0x4000>;
+ interrupts = <0 57 0x04>;
+ };
+
+ src at 020d8000 {
+ compatible = "fsl,imx6q-src";
+ reg = <0x020d8000 0x4000>;
+ interrupts = <0 91 0x04 0 96 0x04>;
+ };
+
+ gpc at 020dc000 {
+ compatible = "fsl,imx6q-gpc";
+ reg = <0x020dc000 0x4000>;
+ interrupts = <0 89 0x04 0 90 0x04>;
+ };
+
+ iomuxc at 020e0000 {
+ reg = <0x020e0000 0x4000>;
+ };
+
+ dcic at 020e4000 { /* DCIC1 */
+ reg = <0x020e4000 0x4000>;
+ interrupts = <0 124 0x04>;
+ };
+
+ dcic at 020e8000 { /* DCIC2 */
+ reg = <0x020e8000 0x4000>;
+ interrupts = <0 125 0x04>;
+ };
+
+ sdma at 020ec000 {
+ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
+ reg = <0x020ec000 0x4000>;
+ interrupts = <0 2 0x04>;
+ };
+ };
+
+ aips-bus at 02100000 { /* AIPS2 */
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x02100000 0x100000>;
+ ranges;
+
+ caam at 02100000 {
+ reg = <0x02100000 0x40000>;
+ interrupts = <0 105 0x04 0 106 0x04>;
+ };
+
+ aipstz at 0217c000 { /* AIPSTZ2 */
+ reg = <0x0217c000 0x4000>;
+ };
+
+ enet at 02188000 {
+ compatible = "fsl,imx6q-fec";
+ reg = <0x02188000 0x4000>;
+ interrupts = <0 118 0x04 0 119 0x04>;
+ status = "disabled";
+ };
+
+ mlb at 0218c000 {
+ reg = <0x0218c000 0x4000>;
+ interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
+ };
+
+ usdhc at 02190000 { /* uSDHC1 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02190000 0x4000>;
+ interrupts = <0 22 0x04>;
+ status = "disabled";
+ };
+
+ usdhc at 02194000 { /* uSDHC2 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02194000 0x4000>;
+ interrupts = <0 23 0x04>;
+ status = "disabled";
+ };
+
+ usdhc at 02198000 { /* uSDHC3 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x02198000 0x4000>;
+ interrupts = <0 24 0x04>;
+ status = "disabled";
+ };
+
+ usdhc at 0219c000 { /* uSDHC4 */
+ compatible = "fsl,imx6q-usdhc";
+ reg = <0x0219c000 0x4000>;
+ interrupts = <0 25 0x04>;
+ status = "disabled";
+ };
+
+ i2c at 021a0000 { /* I2C1 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a0000 0x4000>;
+ interrupts = <0 36 0x04>;
+ status = "disabled";
+ };
+
+ i2c at 021a4000 { /* I2C2 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a4000 0x4000>;
+ interrupts = <0 37 0x04>;
+ status = "disabled";
+ };
+
+ i2c at 021a8000 { /* I2C3 */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c";
+ reg = <0x021a8000 0x4000>;
+ interrupts = <0 38 0x04>;
+ status = "disabled";
+ };
+
+ romcp at 021ac000 {
+ reg = <0x021ac000 0x4000>;
+ };
+
+ mmdc at 021b0000 { /* MMDC0 */
+ compatible = "fsl,imx6q-mmdc";
+ reg = <0x021b0000 0x4000>;
+ };
+
+ mmdc at 021b4000 { /* MMDC1 */
+ reg = <0x021b4000 0x4000>;
+ };
+
+ weim at 021b8000 {
+ reg = <0x021b8000 0x4000>;
+ interrupts = <0 14 0x04>;
+ };
+
+ ocotp at 021bc000 {
+ reg = <0x021bc000 0x4000>;
+ };
+
+ ocotp at 021c0000 {
+ reg = <0x021c0000 0x4000>;
+ interrupts = <0 21 0x04>;
+ };
+
+ tzasc at 021d0000 { /* TZASC1 */
+ reg = <0x021d0000 0x4000>;
+ interrupts = <0 108 0x04>;
+ };
+
+ tzasc at 021d4000 { /* TZASC2 */
+ reg = <0x021d4000 0x4000>;
+ interrupts = <0 109 0x04>;
+ };
+
+ audmux at 021d8000 {
+ reg = <0x021d8000 0x4000>;
+ };
+
+ mipi at 021dc000 { /* MIPI-CSI */
+ reg = <0x021dc000 0x4000>;
+ };
+
+ mipi at 021e0000 { /* MIPI-DSI */
+ reg = <0x021e0000 0x4000>;
+ };
+
+ vdoa at 021e4000 {
+ reg = <0x021e4000 0x4000>;
+ interrupts = <0 18 0x04>;
+ };
+
+ uart1: uart at 021e8000 { /* UART2 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021e8000 0x4000>;
+ interrupts = <0 27 0x04>;
+ status = "disabled";
+ };
+
+ uart2: uart at 021ec000 { /* UART3 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021ec000 0x4000>;
+ interrupts = <0 28 0x04>;
+ status = "disabled";
+ };
+
+ uart3: uart at 021f0000 { /* UART4 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021f0000 0x4000>;
+ interrupts = <0 29 0x04>;
+ status = "disabled";
+ };
+
+ uart4: uart at 021f4000 { /* UART5 */
+ compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
+ reg = <0x021f4000 0x4000>;
+ interrupts = <0 30 0x04>;
+ status = "disabled";
+ };
+ };
+ };
+};
--
1.7.4.1
More information about the linux-arm-kernel
mailing list