[PATCH 5/9] regulator: helper routine to extract fixed_voltage_config
Grant Likely
grant.likely at secretlab.ca
Thu Sep 29 21:26:58 EDT 2011
On Tue, Sep 27, 2011 at 03:42:48PM +0530, Rajendra Nayak wrote:
> The helper routine of_get_fixed_voltage_config() extracts
> fixed_voltage_config structure contents from device tree.
>
> Also add documenation for additional bindings for fixed
> regulators that can be passed through dt.
>
> Signed-off-by: Rajendra Nayak <rnayak at ti.com>
> ---
> .../bindings/regulator/fixed-regulator.txt | 24 +++++++++++++
> drivers/regulator/fixed.c | 36 ++++++++++++++++++++
> include/linux/regulator/fixed.h | 6 ++--
> 3 files changed, 63 insertions(+), 3 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/regulator/fixed-regulator.txt
>
> diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
> new file mode 100644
> index 0000000..a204cbd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt
> @@ -0,0 +1,24 @@
> +Fixed Voltage regulators
> +
> +Required properties:
> +- compatible: Must be "regulator-fixed";
> +
> +Optional properties:
> +- regulator-fixed-supply: Name of the regulator supply
> +- regulator-fixed-microvolts: Output voltage of regulator
> +- regulator-fixed-gpio: gpio to use for enable control
> +- regulator-fixed-startup-delay: startup time in microseconds
> +- regulator-fixed-enable-high: Polarity of enable GPIO, 1 = Active High, 0 = Active low
> +- regulator-fixed-enabled-at-boot: 1 = yes, 0 = no
> +
> +Example:
> +
> + abc: fixedregulator at 0 {
> + compatible = "regulator-fixed";
> + regulator-fixed-supply = "fixed-supply";
> + regulator-fixed-microvolts = <1800000>;
> + regulator-fixed-gpio = <43>;
> + regulator-fixed-startup-delay = <70000>;
> + regulator-fixed-enable-high;
> + regulator-fixed-enabled-at-boot;
> + };
> diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
> index 2fe9d99..c09f791 100644
> --- a/drivers/regulator/fixed.c
> +++ b/drivers/regulator/fixed.c
> @@ -26,6 +26,8 @@
> #include <linux/gpio.h>
> #include <linux/delay.h>
> #include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/regulator/of_regulator.h>
>
> struct fixed_voltage_data {
> struct regulator_desc desc;
> @@ -37,6 +39,40 @@ struct fixed_voltage_data {
> bool is_enabled;
> };
>
> +
> +/**
> + * of_get_fixed_voltage_config - extract fixed_voltage_config structure info
> + * @dev: device requesting for fixed_voltage_config
> + *
> + * Populates fixed_voltage_config structure by extracting data from device
> + * tree node, returns a pointer to the populated structure of NULL if memory
> + * alloc fails.
> + */
> +struct fixed_voltage_config *of_get_fixed_voltage_config(struct device *dev)
> +{
> + struct fixed_voltage_config *config;
> + struct device_node *np = dev->of_node;
> +
> + config = devm_kzalloc(dev, sizeof(struct fixed_voltage_config), GFP_KERNEL);
Nit: config = devm_kzalloc(dev, *config, GFP_KERNEL);
g.
More information about the linux-arm-kernel
mailing list