[PATCH v5 2/3] net/fec: fix fec1 check in fec_enet_mii_init()
Shawn Guo
shawn.guo at linaro.org
Fri Sep 23 08:12:47 EDT 2011
In function fec_enet_mii_init(), it uses non-zero pdev->id as part
of the condition to check the second fec instance (fec1). This works
before the driver supports device tree probe. But in case of device
tree probe, pdev->id is -1 which is also non-zero, so the logic becomes
broken when device tree probe gets supported.
The patch change the logic to check "pdev->id > 0" as the part of the
condition for identifying fec1.
Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
drivers/net/ethernet/freescale/fec.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 9c1d059..2bbe6a5 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -996,7 +996,7 @@ static int fec_enet_mii_init(struct platform_device *pdev)
* mdio interface in board design, and need to be configured by
* fec0 mii_bus.
*/
- if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && pdev->id) {
+ if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && pdev->id > 0) {
/* fec1 uses fec0 mii_bus */
fep->mii_bus = fec0_mii_bus;
return 0;
--
1.7.4.1
More information about the linux-arm-kernel
mailing list