November 2011 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Tue Nov 1 01:59:46 EDT 2011
Ending: Wed Nov 30 23:54:44 EST 2011
Messages: 3799

• [PATCH] i2c-gpio.c: correct logic of pdata->scl_is_open_drain   Voss, Nikolaus
• orion/kirkwood and device tree   Andrew Lunn
• [PATCH] i2c-gpio.c: correct logic of pdata->scl_is_open_drain   Håvard Skinnemoen
• [PATCH 1/7] SPI: S3C64XX: Use bus clocks created using clkdev   padma venkat
• [PATCH] i2c-gpio.c: correct logic of pdata->scl_is_open_drain   Voss, Nikolaus
• [PATCH v2] gpio/samsung: Add device tree support for Exynos4   Sylwester Nawrocki
• [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend   Ulf Hansson
• [PATCH V3] AMBA: Put devices into low-power state in suspend_noirq   Ulf Hansson
• [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Alan Cox
• [PATCH 02/14] ARM : SAMSUNG : Add RS485 support.   Alan Cox
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Will Deacon
• [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Barry Song
• [PATCH v5 2/7] arm: pmu: allow platform specific irq enable/disable handling   Will Deacon
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Russell King - ARM Linux
• [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Greg KH
• [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Barry Song
• [PATCH 3/6] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [PATCH 3/6] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [PATCH] UART: add CSR SiRFprimaII SoC on-chip uart drivers   Greg KH
• [RFC] Shrink sched_clock some more   Marc Zyngier
• AT91 reboot code   Russell King - ARM Linux
• [PATCH 02/14] ARM : SAMSUNG : Add RS485 support.   Paul Schilling
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Mel Gorman
• [RFC 0/5] restart cleanups   Russell King - ARM Linux
• [PATCH 1/5] ARM: restart: remove argument to setup_mm_for_reboot()   Russell King - ARM Linux
• [PATCH 2/5] ARM: restart: get rid of needless at91_arch_reset additional indirection   Russell King - ARM Linux
• [PATCH 3/5] ARM: restart: remove local_irq_disable() from within arch_reset()   Russell King - ARM Linux
• [PATCH 4/5] ARM: restart: turn reboot setup code into a library function   Russell King - ARM Linux
• [PATCH 5/5] ARM: restart: only perform setup for restart when soft-restarting   Russell King - ARM Linux
• [PATCH] i2c-gpio.c: correct logic of pdata->scl_is_open_drain   H Hartley Sweeten
• [PATCH 3/5] ARM: restart: remove local_irq_disable() from within arch_reset()   H Hartley Sweeten
• [RFC 0/5] restart cleanups   Russell King - ARM Linux
• [GIT PULL] pending DT patches and cleanup for map_io for v3.2 merge window   Tony Lindgren
• [RFC 0/5] restart cleanups   Russell King - ARM Linux
• [PATCH 3/5] ARM: restart: remove local_irq_disable() from within arch_reset()   Russell King - ARM Linux
• [PATCH 01/51] ARM: reset: introduce arm_arch_reset function pointer   Will Deacon
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Michal Nazarewicz
• [PATCH] [TRIVIAL] ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'   Fabio Estevam
• [PATCH 0/3] Initial PXA DT bindings   Marek Vasut
• [PATCH 1/3] ARM: pxa: Add DT support to pxa2xx-uart   Marek Vasut
• [PATCH 2/3] ARM: pxa: Add DT testing machine   Marek Vasut
• [PATCH 3/3] ARM: pxa: Add basic DTS files for PXA/Vpac270 testing machine   Marek Vasut
• [PATCH 2/9] mm: alloc_contig_freed_pages() added   Mel Gorman
• [PATCH 02/14] ARM : SAMSUNG : Add RS485 support.   Paul Schilling
• [PATCH 02/14] ARM : SAMSUNG : Add RS485 support.   Paul Schilling
• [RFC 0/5] restart cleanups   Will Deacon
• [RFC 0/5] restart cleanups   Russell King - ARM Linux
• [PATCH 02/14] ARM : SAMSUNG : Add RS485 support.   Alan Cox
• [PATCH 1/3] ARM: pxa: Add DT support to pxa2xx-uart   Rob Herring
• [PATCH 1/3] ARM: pxa: Add DT support to pxa2xx-uart   Marek Vasut
• [PATCH v4 0/3] paz00 updates for 3.3   Marc Dietrich
• [PATCH 1/3] ARM: tegra: paz00: add support for wakeup gpio key   Marc Dietrich
• [PATCH 2/3] staging: nvec: add device tree support   Marc Dietrich
• [PATCH 3/3] arm/dt: tegra: add dts file for paz00   Marc Dietrich
• [RFC 0/5] restart cleanups   Will Deacon
• [PATCH v3 0/4] OMAP: iommu: hwmod support and runtime PM   Omar Ramirez Luna
• [PATCH v3 1/4] OMAP3: hwmod data: add mmu data for iva and isp   Omar Ramirez Luna
• [PATCH v3 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Omar Ramirez Luna
• [PATCH v3 3/4] OMAP3/4: iommu: migrate to hwmod framework   Omar Ramirez Luna
• [PATCH v3 4/4] OMAP3/4: iommu: adapt to runtime pm   Omar Ramirez Luna
• [PATCH 1/5] ARM: restart: remove argument to setup_mm_for_reboot()   Ryan Mallon
• [PATCH 2/3] staging: nvec: add device tree support   Stephen Warren
• [PATCH 3/3] arm/dt: tegra: add dts file for paz00   Stephen Warren
• [RFC 0/5] restart cleanups   Russell King - ARM Linux
• [GIT PULL] msm fix: fixup machine_desc missed in merge   David Brown
• [PATCH] ARM: OMAP2+: l3-noc: Include linux/module.h   Axel Lin
• [PATCH] ARM: OMAP: dmtimer: Include linux/module.h   Axel Lin
• [GIT PULL 0/13 (12)] arm-soc updates   Arnd Bergmann
• [GIT PULL 9/13] arm-soc updates spanning multiple platforms   Arnd Bergmann
• [GIT PULL 3/13] arm-soc driver   Arnd Bergmann
• [GIT PULL 0/13 (12)] arm-soc updates   Linus Torvalds
• AT91 reboot code   Andrew Victor
• [PATCH] i2c-gpio.c: correct logic of pdata->scl_is_open_drain   Voss, Nikolaus
• [PATCH] dt: add empty of_alias_get_id() for non-dt builds   Jean-Christophe PLAGNIOL-VILLARD
• [GIT PULL] hwspinlock changes for 3.2   Ohad Ben-Cohen
• [RFC 0/5] restart cleanups   Robert Jarzmik
• [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend   Russell King - ARM Linux
• [GIT PULL] hwspinlock changes for 3.2   Chris Ball
• [PATCH] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [PATCH v3 4/4] OMAP3/4: iommu: adapt to runtime pm   MyungJoo Ham
• AT91 reboot code   Will Deacon
• [RFC 0/5] restart cleanups   Russell King - ARM Linux
• [PATCH V3] AMBA: Put devices into low-power state in suspend_noirq   MyungJoo Ham
• [PATCH] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Jamie Iles
• [PATCH V3] AMBA: Put devices into low-power state in suspend_noirq   Russell King - ARM Linux
• [PATCH] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Russell King - ARM Linux
• [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend   Ulf Hansson
• [PATCH v3 0/3] ARM:i.MX fix compile errors and warnings   Jason Liu
• [PATCH v3 1/3] ARM:i.MX: fix build error in tzic/avic.c   Jason Liu
• [PATCH] ARM: mx25: Add the missing IIM base definition   Jason Liu
• [PATCH] slub: doc: update the slabinfo.c file path   Jason Liu
• [PATCH v3 2/3] ARM:i.MX: fix the build error in clock-mx51-mx53.c   Jason Liu
• [PATCH v3 3/3] ARM:i.MX: fix the compile warnings in clock-mx51-mx53.c   Jason Liu
• [PATCH 1/7] SPI: S3C64XX: Use bus clocks created using clkdev   Kukjin Kim
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Marc Zyngier
• [PATCH V4 0/4] Add SPI clkdev support   Kukjin Kim
• [PATCH v5 0/2] Add device tree support for Samsung's keypad controller driver   Kukjin Kim
• [PATCH 5/7] ARM: EXYNOS4: Add support external GIC   Kukjin Kim
• [PATCH v2] gpio/samsung: Add device tree support for Exynos4   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Fix compile error due to kfree   Kukjin Kim
• [PATCH 1/3 v3.1] ARM: S3C64XX: Update for conversion to SAMSUNG_GPIO_EXTRA   Kukjin Kim
• [PATCH 5/5] ARM: restart: only perform setup for restart when soft-restarting   Will Deacon
• [PATCH V6] SDHCI: S3C: Use generic clock names for sdhci bus clock options   Kukjin Kim
• [PATCH 1/3 v3.1] ARM: S3C64XX: Update for conversion to SAMSUNG_GPIO_EXTRA   Mark Brown
• [PATCHv2] ARM: zImage: Use $(CROSS_COMPILE)size to get .bss size   Thomas Weber
• [PATCH 5/5] ARM: restart: only perform setup for restart when soft-restarting   Russell King - ARM Linux
• Exynos4: Enable device tree support for GIC controller   Kukjin Kim
• [PATCH v2 0/2] ARM: Samsung: Add basic device tree support for Exynos4 boards   Kukjin Kim
• [PATCH] AMBA: Use suspend_noriq to force devices into runtime suspend   Russell King - ARM Linux
• [PATCH V4 0/4] Add SPI clkdev support   Russell King - ARM Linux
• [PATCH] slub: doc: update the slabinfo.c file path   Russell King - ARM Linux
• [PATCH v2] gpio/samsung: Add device tree support for Exynos4   Thomas Abraham
• [PATCH v2] gpio/samsung: Add device tree support for Exynos4   Thomas Abraham
• [PATCH v2] gpio/samsung: Add device tree support for Exynos4   Mark Brown
• [PATCH 5/5] ARM: restart: only perform setup for restart when soft-restarting   Will Deacon
• [PATCH] dt: add empty of_alias_get_id() for non-dt builds   Grant Likely
• [PATCH v2 1/5] ARM: SPMP8000: Add machine base files   Zoltan Devai
• [PATCH] [TRIVIAL] ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'   Jiri Kosina
• [RFC 0/5] restart cleanups   Nicolas Pitre
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Russell King - ARM Linux
• [PATCH] [TRIVIAL] ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT'   Paul Bolle
• [RFC 0/5] restart cleanups   Richard Purdie
• [PATCH V3] AMBA: Put devices into low-power state in suspend_noirq   Ulf Hansson
• [PATCH 1/3] ARM: pxa: Add DT support to pxa2xx-uart   Rob Herring
• [PATCH V3] AMBA: Put devices into low-power state in suspend_noirq   Russell King - ARM Linux
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCH v2 0/8] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH v2 1/8] arm/tegra: initial device tree for tegra30   Peter De Schrijver
• [PATCH v2 2/8] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [PATCH v2 3/8] arm/tegra: rename tegra20 pinmux files   Peter De Schrijver
• [PATCH v2 4/8] arm/tegra: prepare pinmux code for multiple tegra variants   Peter De Schrijver
• [PATCH v2 5/8] arm/tegra: add new fields to struct tegra_pingroup_desc   Peter De Schrijver
• [PATCH v2 6/8] arm/tegra: pinmux tables and definitions for tegra30   Peter De Schrijver
• [PATCH v2 7/8] arm/tegra: implement support for tegra30   Peter De Schrijver
• [PATCH v2 8/8] arm/tegra: add support for tegra30 based board cardhu   Peter De Schrijver
• [PATCH] spi/pl022: Enable clock in probe an use runtime_idle   Russell King - ARM Linux
• [GIT PULL 0/13 (12)] arm-soc updates   Arnd Bergmann
• [PATCH v2 1/3] Add support for mini-box.com picoSAM9G45 board   Russell King - ARM Linux
• [PATCH 1/3] ARM: pxa: Add DT support to pxa2xx-uart   Marek Vasut
• [PATCH 1/4] ARM: PL330: Don't call the callbacks if there isn't any active transfer   Javi Merino
• [PATCH 2/4] ARM: PL330: Only register usable channels   Javi Merino
• [PATCH 3/4] ARM: PL330: Fix the size of the dst_cache_ctrl field   Javi Merino
• [PATCH 4/4] ARM: PL330: Fix typo in _prepare_ccr()   Javi Merino
• [PATCH v2] gpio/samsung: Add device tree support for Exynos4   Sylwester Nawrocki
• [PATCH 1/5] ARM: restart: remove argument to setup_mm_for_reboot()   Russell King - ARM Linux
• [RFC 0/5] restart cleanups   Russell King - ARM Linux
• [PATCH v3 0/4] OMAP: iommu: hwmod support and runtime PM   Ramirez Luna, Omar
• AT91 reboot code   Russell King - ARM Linux
• AT91 reboot code   Russell King - ARM Linux
• [PATCH v3 4/4] OMAP3/4: iommu: adapt to runtime pm   Russell King - ARM Linux
• [PATCH v3 4/4] OMAP3/4: iommu: adapt to runtime pm   Ramirez Luna, Omar
• [PATCH v3 4/4] OMAP3/4: iommu: adapt to runtime pm   Ramirez Luna, Omar
• [PATCH] arm/tegra: remove unused defines   Peter De Schrijver
• [PATCH] arm/tegra: add support for tegra30 interrupts   Peter De Schrijver
• AT91 reboot code   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 8/8] arm/tegra: add support for tegra30 based board cardhu   Peter De Schrijver
• [PATCH v2 1/3] Add support for mini-box.com picoSAM9G45 board   Jean-Christophe PLAGNIOL-VILLARD
• [AT91 PULL] defconfig pullrequest   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 1/3] Add support for mini-box.com picoSAM9G45 board   Russell King - ARM Linux
• [PATCH v2 8/8] arm/tegra: add support for tegra30 based board cardhu   Stephen Warren
• [PATCH v2 8/8] arm/tegra: add support for tegra30 based board cardhu   Peter De Schrijver
• [PATCH v2 8/8] arm/tegra: add support for tegra30 based board cardhu   Peter De Schrijver
• [PATCH] arm/tegra: remove unused defines   Stephen Warren
• [GIT PULL 0/13 (12)] arm-soc updates   Tony Lindgren
• [PATCH] arm/tegra: add support for tegra30 interrupts   Stephen Warren
• orion/kirkwood and device tree   Jason
• [PATCH v7 11/16] ARM: LPAE: Add fault handling support   Catalin Marinas
• [PATCH v7 16/16] ARM: LPAE: Add the Kconfig entries   Russell King - ARM Linux
• [PATCH 0/2] PPI fixes for 3.2   Marc Zyngier
• [PATCH 1/2] ARM: EXYNOS4: convert MCT to percpu interrupt API   Marc Zyngier
• [PATCH 2/2] ARM: mcx: fix local timer interrupt handling   Marc Zyngier
• [PATCH V6] SDHCI: S3C: Use generic clock names for sdhci bus clock options   Chris Ball
• [PATCH] arm/tegra: add support for tegra30 interrupts   Stephen Warren
• [PATCH v7 16/16] ARM: LPAE: Add the Kconfig entries   Catalin Marinas
• [PATCH] arm/tegra: add support for tegra30 interrupts   Colin Cross
• [PATCH 2/2] ARM: mcx: fix local timer interrupt handling   Uwe Kleine-König
• [PATCH v2 2/8] arm/tegra: prepare early init for multiple tegra variants   Colin Cross
• [PATCH v2 1/3] Add support for mini-box.com picoSAM9G45 board   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 00/34] msm: msm8660 and msm8960 clock support   David Brown
• [RFC PATCH 01/34] msm: clock-pcom: Mark functions static   David Brown
• [RFC PATCH 02/34] msm: clock: Always use an array to iterate over clocks   David Brown
• [RFC PATCH 03/34] msm: clock: Pass struct clk to the clk_ops   David Brown
• [RFC PATCH 04/34] msm: clock: Support one lock per clock   David Brown
• [RFC PATCH 05/34] msm: clock-pcom: Introduce a struct pcom_clk   David Brown
• [RFC PATCH 06/34] msm: clock: Support clk_[s|g]et_parent() clk_ops   David Brown
• [RFC PATCH 07/34] msm: clock-debug: Use clk_enable()/clk_disable() directly   David Brown
• [RFC PATCH 08/34] msm: clock: Enable/disable parent clocks generically   David Brown
• [RFC PATCH 09/34] msm: clock: Implement rate voting   David Brown
• [RFC PATCH 10/34] msm: clock-pcom: Add pbus specific clock ops   David Brown
• [RFC PATCH 11/34] msm: Migrate to clock rate voting   David Brown
• [RFC PATCH 12/34] msm: clock: Make most clk_*() operations optional   David Brown
• [RFC PATCH 13/34] msm: clock-debug: Implement a default is_enabled()   David Brown
• [RFC PATCH 14/34] msm: proc_comm: Add CLKCTL_RPC_SRC_REQUEST   David Brown
• [RFC PATCH 15/34] msm: clock: Add local clock control framework   David Brown
• [RFC PATCH 16/34] msm: clock-pcom: Expose pc_clk_reset   David Brown
• [RFC PATCH 17/34] msm: clock: Add 7x30 local clock support   David Brown
• [RFC PATCH 18/34] msm: clock-local: Add support for 8x60 clock types   David Brown
• [RFC PATCH 20/34] msm: clock: Add list_rate debugfs nodes for locally-controlled clocks   David Brown
• [RFC PATCH 21/34] msm: clock: Add debugfs interface to measure clock rates   David Brown
• [RFC PATCH 22/34] msm: clock-8x60: Support measurement of CPU and L2 clocks   David Brown
• [RFC PATCH 23/34] msm: Unify iomap for clock regions   David Brown
• [RFC PATCH 24/34] msm: clock: Support dummy clocks   David Brown
• [RFC PATCH 26/34] msm: 8660: Add FLUID support   David Brown
• [RFC PATCH 27/34] msm-8x60: Add serial support   David Brown
• [RFC PATCH 28/34] msm: clock: Invert CLKFLAG_AUTO_OFF   David Brown
• [RFC PATCH 29/34] msm: clock: Expand CLK_MIN, CLK_MAX and CLK_MINMAX macros   David Brown
• [RFC PATCH 30/34] msm: clock: Add EBI1 voter clocks for ADM on SoCs without them   David Brown
• [RFC PATCH 31/34] msm: clock: Remove msm_clk_soc_init()   David Brown
• [RFC PATCH 32/34] msm: clock-8x60: Add local control of vpe_axi_clk and vpe_axi_clk   David Brown
• [RFC PATCH 33/34] ARM: msm: fix names of UART clocks   David Brown
• [RFC PATCH 34/34] msm_serial: fix clock rate on DMA-based uarts   David Brown
• [PATCH] arch: arm: tegra: Enable headphone detection gpio   Stephen Warren
• [PATCH] arm/tegra: add support for tegra30 interrupts   Stephen Warren
• [PATCH] arm/tegra: add support for tegra30 interrupts   Russell King - ARM Linux
• [PATCH] arm/tegra: add support for tegra30 interrupts   Felipe Balbi
• [PATCH] arm/tegra: add support for tegra30 interrupts   Russell King - ARM Linux
• [RFC PATCH 02/34] msm: clock: Always use an array to iterate over clocks   Russell King - ARM Linux
• [PATCH] arm/tegra: add support for tegra30 interrupts   Felipe Balbi
• [PATCH] arm/tegra: Remove code that's ifndef CONFIG_ARM_GIC   Stephen Warren
• [PATCH] arm/tegra: add support for tegra30 interrupts   Russell King - ARM Linux
• [PATCH 0/6] mmc: sdhci-s3c: Rework platform data and add device tree support.   Thomas Abraham
• [PATCH 1/6] mmc: sdhci-s3c: Remove usage of clk_type member in platform data   Thomas Abraham
• [PATCH 2/6] arm: exynos4: use 'exynos4-sdhci' as device name for sdhci controllers   Thomas Abraham
• [PATCH 3/6] arm: samsung: remove all uses of clk_type member in sdhci platform data   Thomas Abraham
• [PATCH 4/6] mmc: sdhci-s3c: Keep a copy of platform data and use it   Thomas Abraham
• [PATCH 5/6] mmc: Add OF bindings support for mmc host controller capabilities   Thomas Abraham
• [PATCH 6/6] mmc: sdhci-s3c: Add device tree support   Thomas Abraham
• [PATCH] arm/tegra: add support for tegra30 interrupts   Felipe Balbi
• [PATCH V6] SDHCI: S3C: Use generic clock names for sdhci bus clock options   Thomas Abraham
• [PATCH V4 0/4] Add SPI clkdev support   Padmavathi Venna
• [PATCH V4 1/4] ARM: S3C64XX: Add SPI clkdev support   Padmavathi Venna
• [PATCH V4 2/4] ARM: S5PC100: Add SPI clkdev support   Padmavathi Venna
• [PATCH V4 3/4] ARM: S5P64X0: Add SPI clkdev support   Padmavathi Venna
• [PATCH V4 4/4] ARM: S5PV210: Add SPI clkdev support   Padmavathi Venna
• [RESEND][PATCH 6/6] ARM: SAMSUNG: Remove SPI bus clocks from platform data   Padmavathi Venna
• [PATCH] pxa/mioa701: remove machine restart and halt code   Robert Jarzmik
• [PATCH] pxa/mioa701: remove machine restart and halt code   Robert Jarzmik
• [RFC 0/5] restart cleanups   Robert Jarzmik
• [RFC PATCH 02/34] msm: clock: Always use an array to iterate over clocks   Stephen Boyd
• [PATCH 00/10] cpufreq: OMAP: move into drivers, cleanups/fixes for v3.2   Kevin Hilman
• orion/kirkwood and device tree   Michael Walle
• [PATCH 00/10] cpufreq: OMAP: move into drivers, cleanups/fixes for v3.2   Dave Jones
• [GIT PULL] gpio/omap: minor cleanups for v3.2   Kevin Hilman
• [PATCH V3] AMBA: Put devices into low-power state in suspend_noirq   Rafael J. Wysocki
• [RFC 0/5] restart cleanups   Russell King - ARM Linux
• [PATCH 00/10] cpufreq: OMAP: move into drivers, cleanups/fixes for v3.2   Kevin Hilman
• [PATCH] slub: doc: update the slabinfo.c file path   Jason Liu
• [PATCH] ARM: mx25: Add the missing IIM base definition   Jason Liu
• [PATCH] ARM: SAMSUNG: Add clk enable/disable of pwm   Kukjin Kim
• [PATCH 1/3 v3] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210/4212   Kukjin Kim
• [PATCH 3/3 v3] ARM: EXYNOS4: Delete the power domain code depend on samsung SoC   Kukjin Kim
• [PATCH V6] SDHCI: S3C: Use generic clock names for sdhci bus clock options   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Add clk enable/disable of pwm   Joonyoung Shim
• [PATCH v3] asm-generic/gpio.h: merge basic gpiolib wrappers   Mike Frysinger
• [PATCH 2/2] ARM: mcx: fix local timer interrupt handling   Shawn Guo
• [PATCH] ARM : mx35: 3ds-board: add framebuffer device   wu guoxing
• [PATCH 1/2] ARM: EXYNOS4: convert MCT to percpu interrupt API   Kukjin Kim
• [PATCH v3 3/3] ARM:i.MX: fix the compile warnings in clock-mx51-mx53.c   Sascha Hauer
• [PATCH] DMA: PL330: Fix build warning   Boojin Kim
• [PATCH 2/2] ARM: mcx: fix local timer interrupt handling   Sascha Hauer
• [PATCH RESEND] ARM: OMAP: omap_device: Include linux/export.h   Axel Lin
• [PATCH] iomux-mx25: configuration to support CSPI3 on CSI pins   Sascha Hauer
• [PATCH] ARM : mx35: 3ds-board: add framebuffer device   Sascha Hauer
• [PATCH v3 3/3] ARM:i.MX: fix the compile warnings in clock-mx51-mx53.c   Jason Liu
• [PATCH 3/3 v3.1] ARM: S3C64XX: Correct reservation of GPIOs for CPU module on Cragganmore   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Add clk enable/disable of pwm   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Add clk enable/disable of pwm   Joonyoung Shim
• [PATCH] ARM : mx35: 3ds-board: add framebuffer device   Wu Guoxing-B39297
• [PATCH] ARM : mx35: 3ds-board: add framebuffer device   Wu Guoxing-B39297
• Recall: [PATCH] ARM : mx35: 3ds-board: add framebuffer device   Wu Guoxing-B39297
• Recall: [PATCH] ARM : mx35: 3ds-board: add framebuffer device   Wu Guoxing-B39297
• [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Marek Szyprowski
• [PATCH v3 3/3] ARM:i.MX: fix the compile warnings in clock-mx51-mx53.c   Sascha Hauer
• Query about float point operation on Cortex A9   bill4carson
• [PATCH] ARM: SAMSUNG: Add clk enable/disable of pwm   Kyungmin Park
• [PATCH] ARM: SAMSUNG: Add clk enable/disable of pwm   Kyungmin Park
• [PATCH v3 3/3] ARM:i.MX: fix the compile warnings in clock-mx51-mx53.c   Jason Liu
• [PATCH V3] AMBA: Put devices into low-power state in suspend_noirq   Ulf Hansson
• [PATCH] ARM: SAMSUNG: Add clk enable/disable of pwm   Kukjin Kim
• [PATCH] ARM: SAMSUNG: Add clk enable/disable of pwm   Russell King - ARM Linux
• [RFC 0/5] restart cleanups   Russell King - ARM Linux
• [PATCH v2 2/8] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [RFC 0/5] restart cleanups   Kukjin Kim
• [PATCH v2 0/2] ARM:i.MX: fix build errors   Jason Liu
• [PATCH v2 1/2] ARM:i.MX: fix build error in tzic/avic.c   Jason Liu
• [PATCH v2 2/2] ARM:i.MX: fix build error in clock-mx51-mx53.c   Jason Liu
• [PATCH] ARM: SAMSUNG: Add clk enable/disable of pwm   Kyungmin Park
• [RFC 0/5] restart cleanups   Russell King - ARM Linux
• [PATCH v2 2/8] arm/tegra: prepare early init for multiple tegra variants   Russell King - ARM Linux
• [PATCHv2] AT91: Add a driver for the ADC   Maxime Ripard
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH] ARM: SAMSUNG: Add clk enable/disable of pwm   Joonyoung Shim
• [PATCH 1/3 v3] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210/4212   Sylwester Nawrocki
• [PATCH v3 3/3] ARM:i.MX: fix the compile warnings in clock-mx51-mx53.c   Jason Liu
• [PATCH 0/3] Support omap_pm_get_dev_context_loss_count() for OMAP4   Rajendra Nayak
• [PATCH 1/3] ARM: OMAP: hmwod: Add support for per hwmod/module context lost count   Rajendra Nayak
• [PATCH 2/3] ARM: OMAP: hwmod: Update/Clear module specific context lost counters   Rajendra Nayak
• [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported   Rajendra Nayak
• [PATCH] mmc: omap_hsmmc: fix typo around pr_info() call   Daniel Mack
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Linus Walleij
• [PATCH] ARM : mx35: 3ds-board: add framebuffer device   Sascha Hauer
• [PATCH] MAINTAINERS: add ARM/FREESCALE MXS entry   Sascha Hauer
• [PATCH 3/3 v3.1] ARM: S3C64XX: Correct reservation of GPIOs for CPU module on Cragganmore   Mark Brown
• [PATCH] mmc: omap_hsmmc: fix typo around pr_info() call   S, Venkatraman
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Linus Walleij
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Russell King - ARM Linux
• [PATCH] kirkwood: Recognize A1 revision of 6282 chip   Martin Michlmayr
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Linus Walleij
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Russell King - ARM Linux
• [PATCH-V3 2/4] arm:omap:am33xx: Update common OMAP machine specific sources   Hiremath, Vaibhav
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Nicolas Pitre
• [PATCH] spi/pl022: Enable clock in probe an use runtime_idle   Ulf Hansson
• [PATCH] spi/pl022: Enable clock in probe an use runtime_idle   Russell King - ARM Linux
• [PATCH RESEND] ARM: OMAP: omap_device: Include linux/export.h   Kevin Hilman
• [PATCH RESEND] ARM: OMAP: omap_device: Include linux/export.h   Paul Gortmaker
• [PATCH 1/1] atmel/spi: fix missing probe during the switch to module_platform_driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/1] atmel/spi: fix missing probe during the switch to module_platform_driver   Deepak Saxena
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCH v2 1/5] ARM: SPMP8000: Add machine base files   Arnd Bergmann
• [PATCH v2] atmel/spi: fix missing probe during the switch to module_platform_driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv2 02/10] ARM: vic: MULTI_IRQ_HANDLER handler   Russell King - ARM Linux
• [PATCH 1/1] atmel/spi: fix missing probe during the switch to module_platform_driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] OMAP4: I2C: Enable FIFO usage for OMAP4   Shubhrajyoti D
• [PATCH v2] atmel/spi: fix missing probe during the switch to module_platform_driver   Russell King - ARM Linux
• [PATCH] at91: vmalloc fix missing AT91_VIRT_BASE define   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] spi/pl022: Enable clock in probe an use runtime_idle   Ulf Hansson
• mainline tree fails to build with OMAP3-only config   Daniel Mack
• [PATCH V2] spi/pl022: Enable clock in probe   Ulf Hansson
• [PATCH V2] spi/pl022: Enable clock in probe   Linus Walleij
• [PATCH] MAINTAINERS: add ARM/FREESCALE MXS entry   Shawn Guo
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Linus Walleij
• [PATCH v2] atmel/spi: fix missing probe during the switch to module_platform_driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] Change ARCH_NR_GPIO into a Kconfig variable   Peter De Schrijver
• [PATCH 1/3] ARM: ARCH_NR_GPIO: Make ARCH_NR_GPIO a Kconfig variable   Peter De Schrijver
• [PATCH 2/3] ARM: mach-shmobile: Use CONFIG_ARCH_NR_GPIO   Peter De Schrijver
• [PATCH 3/3] ARM: mach-ux500 Use CONFIG_ARCH_NR_GPIO   Peter De Schrijver
• [PATCH 1/2] atmel/spi: fix missing probe   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] atmel/spi: fix section missmatch   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] atmel/spi: fix missing probe during the switch to module_platform_driver   Russell King - ARM Linux
• [RFC] omap build warnings gone in fixes branch   Tony Lindgren
• [PATCH RESEND] ARM: OMAP: omap_device: Include linux/export.h   Kevin Hilman
• [PATCH 1/2] atmel/spi: fix missing probe   Daniel Mack
• mainline tree fails to build with OMAP3-only config   Daniel Mack
• [PATCH 1/2] atmel/spi: fix missing probe   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2 v4] atmel/spi: fix missing probe   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] atmel/spi: fix missing probe during the switch to module_platform_driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] atmel/spi: fix missing probe during the switch to module_platform_driver   Russell King - ARM Linux
• memory map in fdt was: Re: orion/kirkwood and device tree   Jason
• [PATCH v5] atmel/spi: fix missing probe   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] arm: omap: Fix errors and warnings when building for one board   Tony Lindgren
• Recall: [PATCH] ARM : mx35: 3ds-board: add framebuffer device   Shawn Guo
• [PATCH v2] arm: omap: Fix errors and warnings when building for one board   Daniel Mack
• orion/kirkwood and device tree   Jason
• mainline tree fails to build with OMAP3-only config   Tony Lindgren
• [PATCH] pxa/mioa701: remove machine restart and halt code   Robert Jarzmik
• [GIT PULL] imx compile fixes   Shawn Guo
• [PATCH v8 00/24] gpio/omap: driver cleanup and fixes   Kevin Hilman
• orion/kirkwood and device tree   Michael Walle
• [PATCH 1/1] arm: omap: removed obsolete IRQF_DISABLED   Tony Lindgren
• [PATCH 0/3] Change ARCH_NR_GPIO into a Kconfig variable   Mike Frysinger
• [RFC/PATCH] ARM: OMAP2+: Add chip_select to ads7846 init   Thomas Weber
• [GIT PULL] mxs: patch for v3.2   Shawn Guo
• [PATCH 0/3] Change ARCH_NR_GPIO into a Kconfig variable   Russell King - ARM Linux
• [PATCH 1/2 v4] atmel/spi: fix missing probe   Russell King - ARM Linux
• [PATCH 0/3] Change ARCH_NR_GPIO into a Kconfig variable   Mike Frysinger
• [PATCH 0/3] Change ARCH_NR_GPIO into a Kconfig variable   Mike Frysinger
• [PATCH 0/3] Change ARCH_NR_GPIO into a Kconfig variable   Russell King - ARM Linux
• [PATCH] GPIO: spear: remove empty plat/gpio.h   Russell King - ARM Linux
• [PATCHv4 00/13] VIC DT binding and MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv4 01/13] ARM: Make global handler and CONFIG_MULTI_IRQ_HANDLER mutually exclusive   Jamie Iles
• [PATCHv4 02/13] ARM: vic: device tree binding   Jamie Iles
• [PATCHv4 03/13] ARM: vic: MULTI_IRQ_HANDLER handler   Jamie Iles
• [PATCHv4 04/13] ARM: ep93xx: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv4 05/13] ARM: netx: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv4 06/13] ARM: nomadik: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv4 07/13] ARM: s3c64xx: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv4 08/13] ARM: spear: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv4 09/13] ARM: u300: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv4 10/13] ARM: versatile: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv4 11/13] ARM: samsung: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv4 12/13] ARM: picoxcell: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCHv4 13/13] ARM: VIC: remove non MULTI_IRQ_HANDLER support   Jamie Iles
• [PATCH] picoxcell: add extra temp register to addruart   Jamie Iles
• [PATCH 0/3] Change ARCH_NR_GPIO into a Kconfig variable   Mike Frysinger
• [PATCH] ARM: EXYNOS4: Enable write full line for zeros mode   Boojin Kim
• [PATCH 1/2] arm/dt: add basic usb nodes to tegra device trees   Olof Johansson
• [PATCH 2/2] USB: ehci-tegra: add probing through device tree   Olof Johansson
• [PATCH] GPIO: spear: remove empty plat/gpio.h   Viresh Kumar
• [PATCH] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   wu guoxing
• [PATCH v2] ARM : mx35: 3ds-board: add framebuffer device   wu guoxing
• [PATCH] ARM: EXYNOS4: Enable write full line for zeros mode   Kyungmin Park
• [PATCH] ARM: SAMSUNG: Add clk enable/disable of pwm   Kukjin Kim
• [PATCH 3/3 v3.1] ARM: S3C64XX: Correct reservation of GPIOs for CPU module on Cragganmore   Kukjin Kim
• [PATCH v2] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   wu guoxing
• [GIT PULL] Samsung devel-4 for v3.2   Kukjin Kim
• [PATCH v2] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Wu Guoxing-B39297
• [PATCH] PM: HIBERNATION: skip the swap size check if the snapshot image size is anticipative   Barry Song
• [PATCH] PM: HIBERNATION: skip the swap size check if the snapshot image size is anticipative   Barry Song
• [PATCH v2] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Fabio Estevam
• [PATCH] GPIO: spear: remove empty plat/gpio.h   Russell King - ARM Linux
• [PATCH] GPIO: spear: remove empty plat/gpio.h   Viresh Kumar
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Claudio Scordino
• [PATCH v2] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Wu Guoxing-B39297
• [PATCH v5] atmel/spi: fix missing probe   Nicolas Ferre
• orion/kirkwood and device tree   Simon Guinot
• [PATCH] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Sascha Hauer
• [PATCH v8 00/24] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH 1/1] ARM: mx51/53: correct clocks that take ipg_perclk as parent   Richard Zhao
• [PATCH 1/2] OMAP2+: DMA: Workaround for invalid source position   Péter Ujfalusi
• [PATCH v2 1/3] ARM: pxa168: Add SDHCI support   Tanmay Upadhyay
• [PATCH] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Russell King - ARM Linux
• [PATCH v3] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   wu guoxing
• [PATCH v3] ARM : mx35: 3ds-board: add framebuffer device   wu guoxing
• [PATCH v2 1/3] ARM: pxa168: Add SDHCI support   Philip Rakity
• [PATCH 02/14] ARM : SAMSUNG : Add RS485 support.   Nicolas Ferre
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Jonathan Cameron
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Jonathan Cameron
• config ARCH_AT91SAM9X5   Nicolas Ferre
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Jonathan Cameron
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Jonathan Cameron
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Jonathan Cameron
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Jesper Nilsson
• [PATCH 6/9] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCH] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Wu Guoxing-B39297
• [PATCH 6/6] ARM: S3C64XX: Modified according to SPI consolidation work.   Mark Brown
• [PATCH v2] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Wu Guoxing-B39297
• [PATCH] ARM: mach-davinci: fixed name and parent of pll1 sysclock6   Bas van den Berg
• [PATCH] MAINTAINERS: Update linux-omap git repository   Jarkko Nikula
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH RESEND] omap1: Remove unused omap-alsa.h   Jarkko Nikula
• [PATCH 0/2] Minor PXA fixes   Russell King - ARM Linux
• [PATCH 1/2] ARM: PXA: fix lubbock PCMCIA driver build error   Russell King - ARM Linux
• [PATCH 2/2] ARM: PXA: eseries: fix eseries_register_clks section mismatch warning   Russell King - ARM Linux
• [PATCH] drivers/i2c/busses/i2c-at91.c: fix brokeness   Hubert Feurstein
• [PATCH 0/4] omap hsmmc device tree support   Rajendra Nayak
• [PATCH 1/4] mmc: Add additional binding for mmc host controller   Rajendra Nayak
• [PATCH 2/4] mmc: omap: adapt the hsmmc driver to device tree   Rajendra Nayak
• [RFC][PATCH] Consolidate Samsung MAINTAINERS   Heiko Stübner
• [PATCH 3/4] omap4: mmc: Pass SoC and board data for omap4 mmc from dt   Rajendra Nayak
• [PATCH 4/4] omap4: mmc: use auxdata to pass platform function ptrs   Rajendra Nayak
• [PATCH 0/6] SPI platform device consolidation   Padmavathi Venna
• [PATCH 1/6] ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung   Padmavathi Venna
• [PATCH 2/6] ARM: S3C64XX: Modified files for SPI consolidation work   Padmavathi Venna
• [PATCH 3/6] ARM: S5PC100: Modified files for SPI consolidation work.   Padmavathi Venna
• [PATCH 4/6] ARM: S5P64X0: Modified files for SPI consolidation work   Padmavathi Venna
• [PATCH 5/6] ARM: S5PV210: Modified files for SPI consolidation work   Padmavathi Venna
• [PATCH 6/6] ARM: S3C64XX: Modified according to SPI consolidation work.   Padmavathi Venna
• [PATCH V4] Add SPI Support on Exynos4   Padmavathi Venna
• [PATCH] ARM: EXYNOS4: Add SPI support   Padmavathi Venna
• arm-soc samsung patches blocked on dmaengine patches   Arnd Bergmann
• arm-soc samsung patches blocked on dmaengine patches   Koul, Vinod
• arm-soc samsung patches blocked on dmaengine patches   Kukjin Kim
• [PATCH 0/3] ARM: S5P64X0: Add SDMMC support   Rajeshwari Shinde
• [PATCH 1/3] ARM: S5P64X0: Add HSMMC setup for host Controller   Rajeshwari Shinde
• [PATCH 2/3] ARM: S5P64X0: Add lookup of sdhci-s3c clocks using generic names   Rajeshwari Shinde
• [PATCH 3/3] ARM: S5P64X0: Enable SDHCI support   Rajeshwari Shinde
• [RFC 0/5] restart cleanups   Andrea Adami
• orion/kirkwood and device tree   Nicolas Pitre
• [RFC 0/5] restart cleanups   Russell King - ARM Linux
• [PATCH 1/1] arm: omap: removed obsolete IRQF_DISABLED   Michael Opdenacker
• [RFC 0/5] restart cleanups   Andrea Adami
• [PATCH V2 1/3] mmc: mmci: Put power register deviations in variant data   Ulf Hansson
• [PATCH 0/2] mmc: mmci: Bugfixes for SDIO   Ulf Hansson
• [PATCH 0/2] mmc: mmci: Improvements for SDIO   Ulf Hansson
• [PATCH v2 2/8] arm/tegra: prepare early init for multiple tegra variants   Olof Johansson
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• [PATCH 1/2] arm/dt: add basic usb nodes to tegra device trees   Stephen Warren
• [PATCH 2/2] USB: ehci-tegra: add probing through device tree   Stephen Warren
• [REPOST PATCH] ARM: gic: allow GIC to support non-banked setups   Marc Zyngier
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Linus Walleij
• [PATCH v2 1/3] Add support for mini-box.com picoSAM9G45 board   Jochen Friedrich
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Jonathan Cameron
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH v2 2/8] arm/tegra: prepare early init for multiple tegra variants   Russell King - ARM Linux
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Jonathan Cameron
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Jonathan Cameron
• [PATCH v8 REPOST 17/24] gpio/omap: fix debounce clock handling   Kevin Hilman
• [PATCH v8 24/24] gpio/omap: handle set_dataout reg capable IP on restore   Kevin Hilman
• [PATCH v3 00/17] Switch GIC users (and omap2plus) to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v3 01/17] ARM: Make global handler and CONFIG_MULTI_IRQ_HANDLER mutually exclusive   Marc Zyngier
• [PATCH v3 02/17] ARM: mxc: rename gic_handle_irq to avoid name clash   Marc Zyngier
• [PATCH v3 03/17] ARM: GIC: Add global gic_handle_irq() function   Marc Zyngier
• [PATCH v3 04/17] ARM: mxc: convert smp platforms to global gic_handle_irq()   Marc Zyngier
• [PATCH v3 05/17] ARM: highbank: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v3 06/17] ARM: RealView: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v3 07/17] ARM: VExpress: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v3 08/17] ARM: msm: convert SMP platforms to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v3 09/17] ARM: exynos4: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v3 10/17] ARM: tegra2: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v3 11/17] ARM: ux500: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v3 12/17] ARM: shmobile: convert smp platforms to gic_handle_irq()   Marc Zyngier
• [PATCH v3 13/17] ARM: cns3xxx: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v3 14/17] ARM: zynq: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v3 15/17] ARM: omap2/3: Add global omap2/3_intc_handle_irq() functions   Marc Zyngier
• [PATCH v8 REPOST 21/24] gpio/omap: save and restore debounce registers   Kevin Hilman
• [PATCH v3 16/17] ARM: omap2plus: convert to CONFIG_MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH v3 17/17] ARM: GIC: Make MULTI_IRQ_HANDLER mandatory   Marc Zyngier
• [PATCH 0/4]ARM: exynos4: Add l2 retention mode cpuidle state   amit.kachhap at linaro.org
• [PATCH 1/4] ARM: exynos4: Add support for AFTR mode cpuidle state   amit.kachhap at linaro.org
• [PATCH 2/4] ARM: exynos4: remove useless churn in sleep.S   amit.kachhap at linaro.org
• [PATCH 3/4] ARM: exynos4: add L2 early resume code   amit.kachhap at linaro.org
• [PATCH 4/4] ARM: exynos4: remove useless code to save/restore L2 and GIC state   amit.kachhap at linaro.org
• [PATCH v8 16/24] gpio/omap: use pm-runtime framework   Kevin Hilman
• [PATCH 4/4] ARM: exynos4: remove useless code to save/restore L2 and GIC state   Sylwester Nawrocki
• [RFC PATCH] Generic clock parent enumeration   Domenico Andreoli
• [PATCH] at91: vmalloc fix missing AT91_VIRT_BASE define   Russell King - ARM Linux
• [PATCH 1/2] arm/dt: add basic usb nodes to tegra device trees   Grant Likely
• [PATCH v3 01/17] ARM: Make global handler and CONFIG_MULTI_IRQ_HANDLER mutually exclusive   Nicolas Pitre
• [PATCH v3 05/17] ARM: highbank: convert to CONFIG_MULTI_IRQ_HANDLER   Rob Herring
• [PATCH 2/2] USB: ehci-tegra: add probing through device tree   Olof Johansson
• [PATCH v2 1/2] arm/dt: add basic usb nodes to tegra device trees   Olof Johansson
• [PATCH v2 2/2] USB: ehci-tegra: add probing through device tree   Olof Johansson
• [PATCH v2 2/2] USB: ehci-tegra: add probing through device tree   Grant Likely
• [PATCH v2 1/2] arm/dt: add basic usb nodes to tegra device trees   Stephen Warren
• [PATCH v3 10/17] ARM: tegra2: convert to CONFIG_MULTI_IRQ_HANDLER   Olof Johansson
• [PATCH 5/6] mmc: Add OF bindings support for mmc host controller capabilities   Olof Johansson
• [PATCH 1/4] mmc: Add additional binding for mmc host controller   Olof Johansson
• [PATCH 2/4] mmc: omap: adapt the hsmmc driver to device tree   Olof Johansson
• [PATCH 1/2] OMAP2+: DMA: Workaround for invalid source position   Tony Lindgren
• [PATCH v3 0/4] Device tree support for regulators   Olof Johansson
• [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data   Olof Johansson
• [PATCH v2 1/8] arm/tegra: initial device tree for tegra30   Stephen Warren
• [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt   Olof Johansson
• [PATCH v2 4/8] arm/tegra: prepare pinmux code for multiple tegra variants   Stephen Warren
• [PATCH v3 01/17] ARM: Make global handler and CONFIG_MULTI_IRQ_HANDLER mutually exclusive   Eric Miao
• [PATCH v2 7/8] arm/tegra: implement support for tegra30   Stephen Warren
• [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt   Mark Brown
• [PATCH v3 0/4] Device tree support for regulators   Mark Brown
• [PATCH v2 5/8] arm/tegra: add new fields to struct tegra_pingroup_desc   Olof Johansson
• [PATCH v3 02/17] ARM: mxc: rename gic_handle_irq to avoid name clash   Shawn Guo
• [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v3 04/17] ARM: mxc: convert smp platforms to global gic_handle_irq()   Shawn Guo
• [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt   Olof Johansson
• [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data   Olof Johansson
• [PATCH 2/4] mmc: omap: adapt the hsmmc driver to device tree   Cousson, Benoit
• [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt   Mark Brown
• [PATCH 2/4] mmc: omap: adapt the hsmmc driver to device tree   Olof Johansson
• [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data   Olof Johansson
• [PATCH] arm: dma: Drop GFP_COMP for DMA memory allocations   Stephen Warren
• [PATCH] CPUIdle: Reevaluate C-states under CPU load to favor deeper C-states   Kevin Hilman
• [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt   Olof Johansson
• [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt   Mark Brown
• [PATCH v7 16/21] OMAP2+: UART: Remove custom activate funcs and use generic funcs.   Kevin Hilman
• [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt   Olof Johansson
• [PATCH 2/4] mmc: omap: adapt the hsmmc driver to device tree   Segher Boessenkool
• [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data   Olof Johansson
• [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt   Mark Brown
• [PATCH] PM: HIBERNATION: skip the swap size check if the snapshot image size is anticipative   Rafael J. Wysocki
• [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data   Mark Brown
• [PATCH v7 17/21] OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos   Kevin Hilman
• [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data   Olof Johansson
• [PATCH v7 19/21] OMAP2+: UART: Use custom activate func for console uart.   Kevin Hilman
• [GIT PULL] Samsung devel-4 for v3.2   Arnd Bergmann
• [PATCH v3 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Kevin Hilman
• [PATCH v3 4/4] OMAP3/4: iommu: adapt to runtime pm   Kevin Hilman
• [GIT PULL] Samsung devel-4 for v3.2   Kukjin Kim
• [PATCH 1/4] ARM: OMAP3: cm-t35: add regulator supply for ads7846   Tony Lindgren
• [GIT PULL] arm-soc cleanups for samsung   Arnd Bergmann
• [GIT PULL] Samsung devel-4 for v3.2   Arnd Bergmann
• [PATCH 1/4] ARM: OMAP3: cm-t35: add regulator supply for ads7846   Tony Lindgren
• [PATCH RESEND] omap1: Remove unused omap-alsa.h   Tony Lindgren
• [GIT PULL] Samsung Exynos for v3.2   Kukjin Kim
• [PATCH] ARM: OMAP2+: l3-noc: Include linux/module.h   Tony Lindgren
• [PATCH] ARM: OMAP: dmtimer: Include linux/module.h   Tony Lindgren
• [GIT PULL] ARM: OMAP: DSS hwmod/reset fixes for 3.2   Tony Lindgren
• [GIT PULL] ARM: OMAP3+: clock fixes for 3.2   Tony Lindgren
• [GIT PULL] ARM: OMAP: PRCM/SCM/hwmod miscellaneous fixes for 3.2   Tony Lindgren
• [GIT PULL] OMAP: few more PM cleanup/fixes for v3.2   Tony Lindgren
• [GIT PULL v3] ARM: OMAP: Cortex-A9 PERIPHCLK node for 3.2   Tony Lindgren
• [PATCH] MAINTAINERS: Update linux-omap git repository   Tony Lindgren
• [RFC][PATCH] Consolidate Samsung MAINTAINERS   Kukjin Kim
• [linux-pm] [PATCH] PM: HIBERNATION: skip the swap size check if the snapshot image size is anticipative   Barry Song
• [PATCH 0/6] SPI platform device consolidation   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Add SPI support   Kukjin Kim
• [PATCH 0/3] ARM: S5P64X0: Add SDMMC support   Kukjin Kim
• [PATCH] distclean: Remove generated .dtb files   Dirk Behme
• [PATCH-V3 2/4] arm:omap:am33xx: Update common OMAP machine specific sources   Hiremath, Vaibhav
• [PATCH-V3 2/4] arm:omap:am33xx: Update common OMAP machine specific sources   Hiremath, Vaibhav
• [PATCH] ARM: Allow kernel unaligned accesses on ARMv6+ processors   Catalin Marinas
• [PATCH] ARM: Allow kernel unaligned accesses on ARMv6+ processors   Nicolas Pitre
• [PATCH] ARM: OMAP3: Fix dependencies for OMAP3_EMU   Russell King - ARM Linux
• PLEASE FIX: lack of trailing , on structure initializers   Russell King - ARM Linux
• [PATCH] ARM: OMAP3: Fix dependencies for OMAP3_EMU   Thomas Weber
• [PATCH] ARM: OMAP3: Fix dependencies for OMAP3_EMU   Arnd Bergmann
• [PATCH] PM: HIBERNATION: skip the swap size check if the snapshot image size is anticipative   Pavel Machek
• [PATCH v2] ARM: pl330: Fix a race condition   Thomas Abraham
• [PATCH 0/2] Minor PXA fixes   Russell King - ARM Linux
• [PATCH 1/2] ARM: PXA: fix gpio-pxa.h build errors   Russell King - ARM Linux
• [PATCH 2/2] ARM: PXA: fix includes in pxa2xx_cm_x2xx PCMCIA driver   Russell King - ARM Linux
• [linux-pm] [PATCH] PM: HIBERNATION: skip the swap size check if the snapshot image size is anticipative   Barry Song
• [GIT PULL] Samsung devel-4 for v3.2   Kukjin Kim
• [GIT PULL] Samsung Exynos for v3.2   Kukjin Kim
• [PATCH] ARM: OMAP3: cm-t35: fix mux mode for DSS pins   Igor Grinberg
• OMAP CRAP: The Continuing Story Of Brokenness   Russell King - ARM Linux
• OMAP CRAP: The Continuing Story Of Brokenness   S, Venkatraman
• [PATCH 1/4] ARM: OMAP3: cm-t35: add regulator supply for ads7846   Igor Grinberg
• Pet Peaves about Platform code, and arch_reset   Russell King - ARM Linux
• [PATCH v2 0/4] ARM: OMAP3: cm-t35/cm-t3730 fixes   Igor Grinberg
• [PATCH v2 1/4] ARM: OMAP3: cm-t35: fix ads7846 touchscreen   Igor Grinberg
• [PATCH v2 2/4] ARM: OMAP3: cm-t35: fix DSS regulator supply   Igor Grinberg
• [PATCH v2 3/4] ARM: OMAP3: cm-t35: fix audio   Igor Grinberg
• [PATCH v2 4/4] ARM: OMAP3: cm-t35: fix USB hub   Igor Grinberg
• [GIT PULL] Samsung Exynos for v3.2   Arnd Bergmann
• OMAP CRAP: The Continuing Story Of Brokenness   Per Förlin
• [GIT PULL] arm-soc: mach-exynos code reorganization   Arnd Bergmann
• orion/kirkwood and device tree   Andrew Lunn
• [PATCH 1/1] [orion] Consolidate the address map setup on Orion based platforms.   Andrew Lunn
• [01: PATCH 0/7] Preparation for arch_reset changes   Russell King - ARM Linux
• [PATCH 1/7] ARM: restart: add restart hook to machine_desc record   Russell King - ARM Linux
• [PATCH 2/7] ARM: restart: allow platforms more flexibility specifying restart mode   Russell King - ARM Linux
• [PATCH 3/7] ARM: restart: add default restart modes for PXA mioa701, spitz and tosa   Russell King - ARM Linux
• [PATCH 4/7] ARM: restart: move reboot failure handing into machine_restart()   Russell King - ARM Linux
• [PATCH 5/7] ARM: restart: remove argument to setup_mm_for_reboot()   Russell King - ARM Linux
• [PATCH 6/7] ARM: restart: only perform setup for restart when soft-restarting   Russell King - ARM Linux
• [PATCH 7/7] ARM: restart: remove local_irq_disable() from within arch_reset()   Russell King - ARM Linux
• [02: PATCH 0/41] Platform arch_reset changes   Russell King - ARM Linux
• [PATCH 01/41] ARM: clps711x: consolidate irq/mm/time code into a single file   Russell King - ARM Linux
• [PATCH 02/41] ARM: restart: remove poodle restart handler   Russell King - ARM Linux
• [PATCH 03/41] ARM: restart: remove s3c24xx restart handler   Russell King - ARM Linux
• [PATCH 04/41] ARM: restart: at91: use new restart hook   Russell King - ARM Linux
• [PATCH 05/41] ARM: restart: clps711x: use new restart hook   Russell King - ARM Linux
• [PATCH 06/41] ARM: restart: cns3xxx: use new restart hook   Russell King - ARM Linux
• [PATCH 07/41] ARM: restart: dove: use new restart hook   Russell King - ARM Linux
• [PATCH 08/41] ARM: restart: ebsa110: use new restart hook   Russell King - ARM Linux
• [PATCH 09/41] ARM: restart: ep93xx: use new restart hook   Russell King - ARM Linux
• [PATCH 10/41] ARM: restart: footbridge: use new restart hook   Russell King - ARM Linux
• [PATCH 11/41] ARM: restart: h720x: use new restart hook   Russell King - ARM Linux
• [PATCH 12/41] ARM: restart: highbank: use new restart hook   Russell King - ARM Linux
• [PATCH 13/41] ARM: restart: integrator: use new restart hook   Russell King - ARM Linux
• [PATCH 14/41] ARM: restart: iop3xx: use new restart hook   Russell King - ARM Linux
• [PATCH 15/41] ARM: restart: iop13xx: use new restart hook   Russell King - ARM Linux
• [PATCH 16/41] ARM: restart: ixp2000: use new restart hook   Russell King - ARM Linux
• [PATCH 17/41] ARM: restart: ixp23xx: use new restart hook   Russell King - ARM Linux
• [PATCH 18/41] ARM: restart: ixp4xx: use new restart hook   Russell King - ARM Linux
• [PATCH 19/41] ARM: restart: kirkwood: use new restart hook   Russell King - ARM Linux
• [PATCH 20/41] ARM: restart: lpc32xx: use new restart hook   Russell King - ARM Linux
• [PATCH 21/41] ARM: restart: mmp: use new restart hook   Russell King - ARM Linux
• [PATCH 22/41] ARM: restart: mv78xx0: use new restart hook   Russell King - ARM Linux
• [PATCH 23/41] ARM: restart: mxc: use new restart hook   Russell King - ARM Linux
• [PATCH 24/41] ARM: restart: mxs: use new restart hook   Russell King - ARM Linux
• [PATCH 25/41] ARM: restart: orion5x: use new restart hook   Russell King - ARM Linux
• [PATCH 26/41] ARM: restart: pnx4008: use new restart hook   Russell King - ARM Linux
• [PATCH 27/41] ARM: restart: prima2: use new restart hook   Russell King - ARM Linux
• [PATCH 28/41] ARM: restart: pxa: use new restart hook   Russell King - ARM Linux
• [PATCH 29/41] ARM: restart: realview: use new restart hook   Russell King - ARM Linux
• [PATCH 30/41] ARM: restart: riscpc: use new restart hook   Russell King - ARM Linux
• [PATCH 31/41] ARM: restart: sa1100: use new restart hook   Russell King - ARM Linux
• [PATCH 32/41] ARM: restart: shark: use new restart hook   Russell King - ARM Linux
• [PATCH 33/41] ARM: restart: spear: use new restart hook   Russell King - ARM Linux
• [PATCH 34/41] ARM: restart: tegra: use new restart hook   Russell King - ARM Linux
• [PATCH 35/41] ARM: restart: u300: use new restart hook   Russell King - ARM Linux
• [PATCH 36/41] ARM: restart: versatile: use new restart hook   Russell King - ARM Linux
• [PATCH 37/41] ARM: restart: Versatile Express: use new restart hook   Russell King - ARM Linux
• [PATCH 38/41] ARM: restart: w90x900: use new restart hook   Russell King - ARM Linux
• [PATCH 39/41] ARM: restart: lpc32xx & u300: remove unnecessary printk   Russell King - ARM Linux
• [PATCH 40/41] ARM: restart: remove comments about adding code to arch_reset()   Russell King - ARM Linux
• [PATCH 41/41] ARM: restart: remove the now empty arch_reset()   Russell King - ARM Linux
• [03: PATCH 0/5] The remaining stuff   Russell King - ARM Linux
• [PATCH 1/5] XXX: tcc8k   Russell King - ARM Linux
• [PATCH 2/5] ARM: restart: omap: use new restart hook XXX WIP XXX   Russell King - ARM Linux
• [PATCH 3/5] ARM: restart: exynos4: use new restart hook XXX WIP XXX WHY IS THERE NO LOCAL HEADERS IN arch/arm/mach-exynos4 XXX   Russell King - ARM Linux
• [PATCH 4/5] ARM: restart: s5pv210: use new restart hook XXX WIP XXX WHY IS THERE NO LOCAL HEADERS IN arch/arm/mach-exynos4 XXX   Russell King - ARM Linux
• [PATCH 5/5] ARM: restart: plat-samsung: remove plat/reset.h and s5p_reset_hook   Russell King - ARM Linux
• [PATCH] distclean: Remove generated .dtb files   Grant Likely
• [PATCH] distclean: Remove generated .dtb files   Grant Likely
• CMA v16 and DMA-mapping v13 patch series   Michal Nazarewicz
• orion/kirkwood and device tree   Michael Walle
• orion/kirkwood and device tree   Michael Walle
• [PATCH] regulator: Use regmap_read/write(), regmap_update_bits functions directly   jhbird.choi at samsung.com
• [linux-pm] [PATCH] PM: HIBERNATION: skip the swap size check if the snapshot image size is anticipative   Barry Song
• [PATCH] ARM: Allow kernel unaligned accesses on ARMv6+ processors   John Linn
• orion/kirkwood and device tree   Nicolas Pitre
• [01: PATCH 0/7] Preparation for arch_reset changes   Nicolas Pitre
• [PATCH 19/41] ARM: restart: kirkwood: use new restart hook   Nicolas Pitre
• [PATCH 40/41] ARM: restart: remove comments about adding code to arch_reset()   Nicolas Pitre
• [PATCH 1/2] ARM: mx51/53: correct misuse of _clk_max_enable and _clk_max_disable   Richard Zhao
• [PATCH 2/2] ARM: mxc: fix tzic build error   Richard Zhao
• [PATCH 41/41] ARM: restart: remove the now empty arch_reset()   Nicolas Pitre
• [PATCH] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [PATCH] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [PATCH] arm: exynos: Fix compiler error with THIS_MODULE   Kyungmin Park
• [PATCH 2/2] ARM: mxc: fix tzic build error   Jason Liu
• [PATCH 2/4] mmc: omap: adapt the hsmmc driver to device tree   Rajendra Nayak
• [PATCH 2/4] mmc: omap: adapt the hsmmc driver to device tree   Rajendra Nayak
• [PATCH 2/2] ARM: mxc: fix tzic build error   Richard Zhao
• [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH] distclean: Remove generated .dtb files   Dirk Behme
• orion/kirkwood and device tree   Andrew Lunn
• [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v4 1/4] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v3 2/4] regulator: adapt fixed regulator driver to dt   Rajendra Nayak
• orion/kirkwood and device tree   Andrew Lunn
• [PATCH v5 03/11] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Haojian Zhuang
• [PATCH 1/1] ARM: mx51/53: correct clocks that take ipg_perclk as parent   Sascha Hauer
• [PATCH 35/41] ARM: restart: u300: use new restart hook   Linus Walleij
• [PATCH 27/41] ARM: restart: prima2: use new restart hook   Barry Song
• [PATCH v7 16/21] OMAP2+: UART: Remove custom activate funcs and use generic funcs.   Govindraj
• [PATCH v7 19/21] OMAP2+: UART: Use custom activate func for console uart.   Govindraj
• [PATCH v5 03/11] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Russell King - ARM Linux
• [PATCH] drivers/i2c/busses/i2c-at91.c: fix brokeness   Voss, Nikolaus
• [PATCH v2 0/2] OMAP2+: DMA: fix src/dst position reporting   Peter Ujfalusi
• [PATCH v2 1/2] OMAP2+: DMA: Workaround for invalid source position   Peter Ujfalusi
• [PATCH v2 2/2] OMAP2+: DMA: Workaround for invalid destination position   Peter Ujfalusi
• OMAP3 ISP DMA status   卞磊
• [PATCH v3 01/17] ARM: Make global handler and CONFIG_MULTI_IRQ_HANDLER mutually exclusive   Jamie Iles
• [PATCH v8 16/24] gpio/omap: use pm-runtime framework   DebBarma, Tarun Kanti
• [PATCH] ARM: pxa: add support for Raumfeld DDX   Daniel Mack
• [PATCH] ARM: kirkwood: add LaCie Network Space Lite v2 support   Christophe Vu-Brugier
• [PATCH 3/5] ARM: restart: exynos4: use new restart hook XXX WIP XXX WHY IS THERE NO LOCAL HEADERS IN arch/arm/mach-exynos4 XXX   Russell King - ARM Linux
• [PATCH] ARM: kirkwood: add LaCie Network Space Lite v2 support   Russell King - ARM Linux
• [PATCH v2] ARM: pl330: Fix a race condition   Javi Merino
• [PATCH v3 01/17] ARM: Make global handler and CONFIG_MULTI_IRQ_HANDLER mutually exclusive   Linus Walleij
• [PATCH v2] ARM: pl330: Fix a race condition   Thomas Abraham
• [PATCH v8 REPOST 21/24] gpio/omap: save and restore debounce registers   DebBarma, Tarun Kanti
• [PATCH v3 01/17] ARM: Make global handler and CONFIG_MULTI_IRQ_HANDLER mutually exclusive   Marc Zyngier
• [PATCH v3 01/17] ARM: Make global handler and CONFIG_MULTI_IRQ_HANDLER mutually exclusive   Jamie Iles
• [PATCH 3/5] ARM: restart: exynos4: use new restart hook XXX WIP XXX WHY IS THERE NO LOCAL HEADERS IN arch/arm/mach-exynos4 XXX   Kyungmin Park
• [PATCH v3 01/17] ARM: Make global handler and CONFIG_MULTI_IRQ_HANDLER mutually exclusive   Marc Zyngier
• Missing patches for pxa3xx_nand   Daniel Mack
• PLEASE FIX: lack of trailing , on structure initializers   Nicolas Ferre
• Missing patches for pxa3xx_nand   Daniel Mack
• [PATCH 3/5] ARM: restart: exynos4: use new restart hook XXX WIP XXX WHY IS THERE NO LOCAL HEADERS IN arch/arm/mach-exynos4 XXX   Russell King - ARM Linux
• [PATCH V2] drivers/i2c/busses/i2c-at91.c: fix brokeness   Jean Delvare
• [PATCH v8 24/24] gpio/omap: handle set_dataout reg capable IP on restore   DebBarma, Tarun Kanti
• [PATCH v2 2/8] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [PATCH v2 7/8] arm/tegra: implement support for tegra30   Peter De Schrijver
• [PATCH V2] drivers/i2c/busses/i2c-at91.c: fix brokeness   Nicolas Ferre
• [01: PATCH 0/7] Preparation for arch_reset changes   Will Deacon
• [02: PATCH 0/41] Platform arch_reset changes   Will Deacon
• [PATCH v8 REPOST 17/24] gpio/omap: fix debounce clock handling   DebBarma, Tarun Kanti
• [PATCH] distclean: Remove generated .dtb files   Rob Herring
• [02: PATCH 0/41] Platform arch_reset changes   Russell King - ARM Linux
• [PATCH v3 04/17] ARM: mxc: convert smp platforms to global gic_handle_irq()   Marc Zyngier
• [PATCH v3 0/8] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH v3 1/8] arm/tegra: initial device tree for tegra30   Peter De Schrijver
• [PATCH v3 2/8] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [PATCH v3 3/8] arm/tegra: rename tegra20 pinmux files   Peter De Schrijver
• [PATCH v3 4/8] arm/tegra: prepare pinmux code for multiple tegra variants   Peter De Schrijver
• [PATCH v3 5/8] arm/tegra: add new fields to struct tegra_pingroup_desc   Peter De Schrijver
• [PATCH v3 6/8] arm/tegra: pinmux tables and definitions for tegra30   Peter De Schrijver
• [PATCH v3 7/8] arm/tegra: implement support for tegra30   Peter De Schrijver
• [PATCH v3 8/8] arm/tegra: add support for tegra30 based board cardhu   Peter De Schrijver
• [PATCH 5/6] mmc: Add OF bindings support for mmc host controller capabilities   Thomas Abraham
• [PATCH] ARM: kirkwood: add LaCie Network Space Lite v2 support   Simon Guinot
• [PATCH] ARM: kirkwood: add LaCie Network Space Lite v2 support   Simon Guinot
• [PATCH] ARM: kirkwood: add LaCie Network Space Lite v2 support   Russell King - ARM Linux
• [PATCH] ARM: kirkwood: add LaCie Network Space Lite v2 support   Simon Guinot
• [PATCH-V3 4/4] arm:omap:am33xx: Add low level debugging support   Hiremath, Vaibhav
• [PATCH 12/41] ARM: restart: highbank: use new restart hook   Rob Herring
• [PATCH 0/4] Re-sending pxa3xx nand controller patches   Daniel Mack
• [PATCH 1/4] mtd: pxa3xx_nand: fix a memory leak   Daniel Mack
• [PATCH 2/4] mtd: pxa3xx_nand: remove unused variable 'mtd'   Daniel Mack
• [PATCH 3/4] mtd: pxa3xx_nand: fix nand detection issue   Daniel Mack
• [PATCH 4/4] mtd: pxa3xx_nand: Fix blank page ECC mismatch   Daniel Mack
• [PATCHv3] AT91: Add a driver for the ADC   Maxime Ripard
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH v8 00/16] ARM: Add support for the Large Physical Address Extensions   Catalin Marinas
• [PATCH v8 01/16] ARM: pgtable: switch to use pgtable-nopud.h   Catalin Marinas
• [PATCH v8 02/16] ARM: pgtable: Fix compiler warning in ioremap.c introduced by nopud   Catalin Marinas
• [PATCH v8 03/16] ARM: LPAE: Move page table maintenance macros to pgtable-2level.h   Catalin Marinas
• [PATCH v8 04/16] ARM: LPAE: Move the FSR definitions to separate files   Catalin Marinas
• [PATCH v8 05/16] ARM: LPAE: Factor out classic-MMU specific code into proc-v7-2level.S   Catalin Marinas
• [PATCH v8 06/16] ARM: LPAE: add ISBs around MMU enabling code   Catalin Marinas
• [PATCH v8 07/16] ARM: LPAE: Introduce the 3-level page table format definitions   Catalin Marinas
• [PATCH v8 08/16] ARM: LPAE: Page table maintenance for the 3-level format   Catalin Marinas
• [PATCH v8 09/16] ARM: LPAE: MMU setup for the 3-level page table format   Catalin Marinas
• [PATCH v8 10/16] ARM: LPAE: Invalidate the TLB before freeing the PMD   Catalin Marinas
• [PATCH v8 11/16] ARM: LPAE: Add fault handling support   Catalin Marinas
• [PATCH v8 12/16] ARM: LPAE: Add context switching support   Catalin Marinas
• [PATCH v8 13/16] ARM: LPAE: Add identity mapping support for the 3-level page table format   Catalin Marinas
• [PATCH v8 14/16] ARM: LPAE: mark memory banks with start > ULONG_MAX as highmem   Catalin Marinas
• [PATCH v8 15/16] ARM: LPAE: add support for ATAG_MEM64   Catalin Marinas
• [PATCH v8 16/16] ARM: LPAE: Add the Kconfig entries   Catalin Marinas
• [PATCH 1/1] mmc: omap_hsmmc: DMA unmap only once in case of MMC error   Balaji T K
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Jonathan Cameron
• [PATCH V2] drivers/i2c/busses/i2c-at91.c: fix brokeness   Hubert Feurstein
• [PATCH 0/2] ARM: SAMSUNG: Add pm_caps   Sangwook Lee
• [PATCH 1/2] ARM: SAMSUNG: Add pm_caps into platform data   Sangwook Lee
• [PATCH 2/2] mmc: sdhci-s3c: Add pm_caps into SD/MMC host   Sangwook Lee
• [PATCH] ARM: Allow kernel unaligned accesses on ARMv6+ processors   Catalin Marinas
• [PATCH 09/41] ARM: restart: ep93xx: use new restart hook   H Hartley Sweeten
• [PATCH 41/41] ARM: restart: remove the now empty arch_reset()   H Hartley Sweeten
• [PATCH 38/41] ARM: restart: w90x900: use new restart hook   Russell King - ARM Linux
• [01: PATCH 0/7] Preparation for arch_reset changes   H Hartley Sweeten
• OMAP CRAP: The Continuing Story Of Brokenness   Tony Lindgren
• OMAP CRAP: The Continuing Story Of Brokenness   S, Venkatraman
• [PATCH] ARM: Do not call flush_cache_user_range with mmap_sem held   Catalin Marinas
• OMAP CRAP: The Continuing Story Of Brokenness   Russell King - ARM Linux
• OMAP CRAP: The Continuing Story Of Brokenness   Felipe Balbi
• OMAP CRAP: The Continuing Story Of Brokenness   Tony Lindgren
• [PATCH] arm: omap2+: hwmod: fix breakage introduced by d6504acd   Felipe Balbi
• Arm bootloader choice   Robert Jarzmik
• [PATCH 3/7] ARM: restart: add default restart modes for PXA mioa701, spitz and tosa   Robert Jarzmik
• [PATCH-V3 4/4] arm:omap:am33xx: Add low level debugging support   Tony Lindgren
• [PATCH v3 4/4] OMAP3/4: iommu: adapt to runtime pm   Ramirez Luna, Omar
• [PATCH 1/1] mmc: omap_hsmmc: DMA unmap only once in case of MMC error   Russell King - ARM Linux
• [PATCH] arm: omap2+: hwmod: fix breakage introduced by d6504acd   Russell King - ARM Linux
• [PATCH 1/1] mmc: omap_hsmmc: DMA unmap only once in case of MMC error   Chris Ball
• 2b034922 breaks kexec on ARM   Will Deacon
• 2b034922 breaks kexec on ARM   Russell King - ARM Linux
• [PATCH v3 2/8] arm/tegra: prepare early init for multiple tegra variants   Stephen Warren
• [PATCH v3 0/8] Add support for tegra30 and cardhu   Stephen Warren
• 2b034922 breaks kexec on ARM   Will Deacon
• 2b034922 breaks kexec on ARM   Russell King - ARM Linux
• [PATCH] arm: omap2+: hwmod: fix breakage introduced by d6504acd   Felipe Balbi
• [PATCH v3] ARM: support XZ compressed kernels   Imre Kaloz
• OMAP CRAP: The Continuing Story Of Brokenness   Tony Lindgren
• [PATCH 1/4] ARM: OMAP3: cm-t35: add regulator supply for ads7846   Tony Lindgren
• [PATCH RESEND] ARM: OMAP: omap_device: Include linux/export.h   Tony Lindgren
• [GIT PULL] omap fixes for v3.2 merge window breakage   Tony Lindgren
• [PATCH] ARM: Add lsxhl machine type to mach-types   Michael Walle
• 2b034922 breaks kexec on ARM   Lei Wen
• 2b034922 breaks kexec on ARM   Russell King - ARM Linux
• 2b034922 breaks kexec on ARM   Lei Wen
• [PATCH 5/6] mmc: Add OF bindings support for mmc host controller capabilities   Grant Likely
• [PATCH 6/6] mmc: sdhci-s3c: Add device tree support   Grant Likely
• [PATCH] arm: omap2+: hwmod: fix breakage introduced by d6504acd   Russell King - ARM Linux
• [GIT PULL] omap fixes for v3.2 merge window breakage   Russell King - ARM Linux
• [PATCH] arm: omap2+: hwmod: fix breakage introduced by d6504acd   Paul Walmsley
• Fix handling of return value in omap3xx_hwmod_init and sr warning.   Juergen Kilb
• [PATCH 1/2] ARM:OMAP:hwmod: Fix handling of return value in omap3xx_hwmod_init.   Juergen Kilb
• [PATCH 2/2] ARM:OMAP:hwmod: Fix sr1_hwmod and sr2_hwmod warning.   Juergen Kilb
• [PATCH] arm: omap2+: hwmod: fix breakage introduced by d6504acd   Paul Walmsley
• Fix handling of return value in omap3xx_hwmod_init and sr warning.   Paul Walmsley
• [PATCH 0/3 V2] Initial PXA DT bindings   Marek Vasut
• [PATCH 1/3 V2] ARM: pxa: Add DT support to pxa2xx-uart   Marek Vasut
• [PATCH 2/3 RESEND] ARM: pxa: Add DT testing machine   Marek Vasut
• [PATCH 3/3 V2] ARM: pxa: Add basic DTS files for PXA/Vpac270 testing machine   Marek Vasut
• [PATCH 1/3 V2] ARM: pxa: Add DT support to pxa2xx-uart   Rob Herring
• [PATCH 3/3 V2] ARM: pxa: Add basic DTS files for PXA/Vpac270 testing machine   Rob Herring
• [GIT PULL] omap fixes for v3.2 merge window breakage   Tony Lindgren
• 2b034922 breaks kexec on ARM   Will Deacon
• [PATCH 1/3 V2] ARM: pxa: Add DT support to pxa2xx-uart   Marek Vasut
• [PATCH 3/3 V2] ARM: pxa: Add basic DTS files for PXA/Vpac270 testing machine   Marek Vasut
• [PATCH 2/3 RESEND] ARM: pxa: Add DT testing machine   Rob Herring
• [PATCH 3/3 V2] ARM: pxa: Add basic DTS files for PXA/Vpac270 testing machine   Rob Herring
• [PATCH 2/3 RESEND] ARM: pxa: Add DT testing machine   Marek Vasut
• [PATCH 2/3] ARM: pxa: Add DT testing machine   Grant Likely
• [PATCH 2/3] ARM: pxa: Add DT testing machine   Marek Vasut
• [PATCH 1/3] ARM: pxa: Add DT support to pxa2xx-uart   Grant Likely
• [PATCH 1/3] ARM: pxa: Add DT support to pxa2xx-uart   Marek Vasut
• [PATCH 2/3 RESEND] ARM: pxa: Add DT testing machine   Grant Likely
• [PATCH 2/3 RESEND] ARM: pxa: Add DT testing machine   Marek Vasut
• [PATCH 2/3 RESEND] ARM: pxa: Add DT testing machine   Rob Herring
• [PATCH 2/3 RESEND] ARM: pxa: Add DT testing machine   Rob Herring
• [PATCH] arm: omap2+: hwmod: fix breakage introduced by d6504acd   Russell King - ARM Linux
• [PATCH] arm: omap2+: hwmod: fix breakage introduced by d6504acd   Tony Lindgren
• 2b034922 breaks kexec on ARM   Russell King - ARM Linux
• [PATCH] arm: omap2+: hwmod: fix breakage introduced by d6504acd   Russell King - ARM Linux
• [PATCH v3 0/8] Add support for tegra30 and cardhu   Stephen Warren
• [PATCH] arm: omap2+: hwmod: fix breakage introduced by d6504acd   Tony Lindgren
• [PATCH v3 0/8] Add support for tegra30 and cardhu   Russell King - ARM Linux
• [PATCH] ARM: kirkwood: add LaCie Network Space Lite v2 support   Nicolas Pitre
• [PATCH] arm: omap2+: hwmod: fix breakage introduced by d6504acd   Russell King - ARM Linux
• [PATCH] arm: omap2+: hwmod: fix breakage introduced by d6504acd   Tony Lindgren
• [PATCH 1/2] ARM: use cache type functions for arch_get_unmapped_area   Rob Herring
• [PATCH 2/2] ARM: topdown mmap support   Rob Herring
• [PATCH] ARM: OMAP3: CPUidle: include <linux/export.h>   Kevin Hilman
• [PATCH] ARM: OMAP3: CPUidle: include <linux/export.h>   Tony Lindgren
• [RFC] Shrink sched_clock some more   Kyungmin Park
• [GIT PULL] omap fixes for v3.2 merge window breakage   Tony Lindgren
• [GIT PULL] updated omap fixes for v3.2 merge window breakage   Tony Lindgren
• [PATCH 1/1] ARM: mx51/53: correct clocks that take ipg_perclk as parent   Richard Zhao
• [GIT PULL] omap fixes for v3.2 merge window breakage   Russell King - ARM Linux
• [GIT PULL] omap fixes for v3.2 merge window breakage   Russell King - ARM Linux
• Pet Peaves about Platform code, and arch_reset   Tony Lindgren
• [GIT PULL] omap fixes for v3.2 merge window breakage   Tony Lindgren
• [GIT PULL] updated omap fixes for v3.2 merge window breakage   Tony Lindgren
• [PATCHv2 0/7]ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux   Kevin Hilman
• 2b034922 breaks kexec on ARM   Simon Horman
• [PATCH 2/3 RESEND] ARM: pxa: Add DT testing machine   Grant Likely
• Error for machine_is_m28evk   Fabio Estevam
• [PATCH V2 1/1] ARM: mx51/53: set pwm clock parent to ipg_perclk   Richard Zhao
• [PATCH] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [02: PATCH 0/41] Platform arch_reset changes   Nicolas Pitre
• [PATCH] arm: omap2: fix build failure   tom.leiming at gmail.com
• [PATCH] arm: omap2: select ARM_AMBA if OMAP3_EMU is defined   tom.leiming at gmail.com
• [GIT PULL] Samsung Exynos for v3.2   Kukjin Kim
• [01: PATCH 0/7] Preparation for arch_reset changes   Kukjin Kim
• [PATCH 03/41] ARM: restart: remove s3c24xx restart handler   Kukjin Kim
• Error for machine_is_m28evk   Shawn Guo
• [PATCH] arm: exynos: Fix compiler error with THIS_MODULE   Kukjin Kim
• [PATCH 3/5] ARM: restart: exynos4: use new restart hook XXX WIP XXX WHY IS THERE NO LOCAL HEADERS IN arch/arm/mach-exynos4 XXX   Kukjin Kim
• [PATCH 5/5] ARM: restart: plat-samsung: remove plat/reset.h and s5p_reset_hook   Kukjin Kim
• [PATCH 4/5] ARM: restart: s5pv210: use new restart hook XXX WIP XXX WHY IS THERE NO LOCAL HEADERS IN arch/arm/mach-exynos4 XXX   Kukjin Kim
• [PATCH] ARM: OMAP: dmtimer: fix missing content/correction in low-power mode support   Tarun Kanti DebBarma
• [PATCH v2] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• Error for machine_is_m28evk   Stefano Babic
• [03: PATCH 0/5] The remaining stuff   Kukjin Kim
• [GIT PULL] hwspinlock fixes for 3.2   Ohad Ben-Cohen
• [GIT PULL] ARM: OMAP: DSS hwmod/reset fixes for 3.2   Paul Walmsley
• [GIT PULL v3] ARM: OMAP: Cortex-A9 PERIPHCLK node for 3.2   Paul Walmsley
• Error for machine_is_m28evk   Uwe Kleine-König
• [GIT PULL v3] ARM: OMAP: Cortex-A9 PERIPHCLK node for 3.2   Shilimkar, Santosh
• Error for machine_is_m28evk   Jason Liu
• OMAP CRAP: The Continuing Story Of Brokenness   Tomi Valkeinen
• Error for machine_is_m28evk   Russell King - ARM Linux
• [03: PATCH 0/5] The remaining stuff   Russell King - ARM Linux
• 2b034922 breaks kexec on ARM   Russell King - ARM Linux
• [PATCH v7 17/21] OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos   Rajendra Nayak
• [PATCH v5 3/7] arm: perf: support device with other non-irq resources   Ming Lei
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Nicolas Ferre
• 2b034922 breaks kexec on ARM   Simon Horman
• 2b034922 breaks kexec on ARM   Lei Wen
• [PATCH] ARM: kirkwood: add LaCie Network Space Lite v2 support   Simon Guinot
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/5] ARM: restart: s5pv210: use new restart hook XXX WIP XXX WHY IS THERE NO LOCAL HEADERS IN arch/arm/mach-exynos4 XXX   Russell King - ARM Linux
• [01: PATCH 0/7] Preparation for arch_reset changes   Russell King - ARM Linux
• [GIT PULL] ARM: OMAP: DSS hwmod/reset fixes for 3.2   Tomi Valkeinen
• [PATCH v2] ARM: pxa: add support for Raumfeld DDX   Daniel Mack
• [PATCH v6 00/11] change pxa gpio to platform driver   Haojian Zhuang
• [PATCH v6 01/11] ARM: mmp: fix build error on gpio   Haojian Zhuang
• [PATCH v6 02/11] ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ   Haojian Zhuang
• [PATCH v6 03/11] ARM: pxa: use chained interrupt for GPIO0 and GPIO1   Haojian Zhuang
• [PATCH v6 04/11] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Haojian Zhuang
• [PATCH v6 05/11] ARM: pxa: recognize gpio number and type   Haojian Zhuang
• [PATCH v6 06/11] ARM: pxa: rename NR_BUILTIN_GPIO   Haojian Zhuang
• [PATCH v6 07/11] ARM: pxa: use little endian read write in gpio driver   Haojian Zhuang
• [PATCH v6 08/11] ARM: pxa: use generic gpio operation instead of gpio register   Haojian Zhuang
• [PATCH v6 09/11] ARM: pxa: change gpio to platform device   Haojian Zhuang
• [PATCH v6 10/11] ARM: mmp: clear gpio edge detect   Haojian Zhuang
• [PATCH v6 11/11] ARM: pxa: add clk support in gpio driver   Haojian Zhuang
• [PATCH] at91: fix compile breakage with VMALLOC_END   Jamie Iles
• [GIT PULL] ARM: OMAP: DSS hwmod/reset fixes for 3.2   Paul Walmsley
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Claudio Scordino
• [PATCH] at91: fix compile breakage with VMALLOC_END   Nicolas Ferre
• [PATCH] at91: vmalloc fix missing AT91_VIRT_BASE define   Nicolas Ferre
• [PATCH] iMX28 Ethernet driver fix   Peter Horton
• [PATCH v6 01/11] ARM: mmp: fix build error on gpio   Jason Liu
• [PATCH] fix compilation breakage in entry-armv.S   Guennadi Liakhovetski
• [PATCH] fix compilation breakage in entry-armv.S   Russell King - ARM Linux
• [PATCH v3 0/8] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH v3 0/8] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH] iMX28 Ethernet driver fix   Baruch Siach
• [PATCH] fix compilation breakage in entry-armv.S   Guennadi Liakhovetski
• [PATCH] fix compilation breakage in entry-armv.S   Russell King - ARM Linux
• [GIT PULL] ARM: OMAP: DSS hwmod/reset fixes for 3.2   Tomi Valkeinen
• [PATCH v5 3/7] arm: perf: support device with other non-irq resources   Will Deacon
• Error for machine_is_m28evk   Shawn Guo
• [PATCH v4 0/7] iommu: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH] ARM: msm: fix compilation flags for MSM_SCM   Marc Zyngier
• [GIT PULL] ARM: OMAP: DSS hwmod/reset fixes for 3.2-rc   Paul Walmsley
• [PATCH 1/1] ARM: mx51/53: correct clocks that take ipg_perclk as parent   Sascha Hauer
• [PATCH v6 01/11] ARM: mmp: fix build error on gpio   Haojian Zhuang
• [RFC 0/6] Versatile Express DT support   Pawel Moll
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Thomas Petazzoni
• [PATCH 1/4] ARM: OMAP3: cm-t35: add regulator supply for ads7846   Igor Grinberg
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Thomas Petazzoni
• Error for machine_is_m28evk   Russell King - ARM Linux
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Alan Cox
• [PATCH v4 0/7] iommu: split mapping to page sizes as supported by the hardware   Joerg Roedel
• [PATCH v4 0/7] iommu: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• Error for machine_is_m28evk   Will Deacon
• [PATCH] arm/mxs: fix mmc device adding for mach-mx28evk   Shawn Guo
• [RFC 3/6] ARM: vexpress: Add DT support in v2m   Rob Herring
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Greg KH
• [RFC 6/6] ARM: vexpress: DT-based support for Coretile Express A5x2 (V2P-CA5s)   Rob Herring
• [PATCH 0/2] cpu_logical_map updates for newly merged platforms   Will Deacon
• [PATCH 1/2] ARM: mach-imx: convert logical CPU numbers to physical numbers   Will Deacon
• [PATCH 2/2] ARM: highbank: convert logical CPU numbers to physical numbers   Will Deacon
• Error for machine_is_m28evk   Arnaud Patard (Rtp)
• [PATCH V3 1/4] drivers/i2c/busses/i2c-at91.c: remove broken driver   Felipe Balbi
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Felipe Balbi
• Error for machine_is_m28evk   Russell King - ARM Linux
• [PATCH] ARM: setup: avoid overflowing {elf, arch}_name from proc_info_list   Will Deacon
• [PATCH] genirq: don't allow per cpu interrupts to be suspended   Marc Zyngier
• Error for machine_is_m28evk   Vincent Sanders
• [PATCH] genirq: don't allow per cpu interrupts to be suspended   Shilimkar, Santosh
• [PATCH] ARM: mm: update CONTEXTIDR register to contain PID of current process   Will Deacon
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Nicolas Ferre
• [PATCH v3] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Sascha Hauer
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Nicolas Ferre
• [PATCH 5/6] mmc: Add OF bindings support for mmc host controller capabilities   Thomas Abraham
• [PATCH 2/5] dma i.MX: remove individual SOC dependency   Sascha Hauer
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Felipe Balbi
• [PATCH 6/6] mmc: sdhci-s3c: Add device tree support   Thomas Abraham
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Paul Walmsley
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Voss, Nikolaus
• [PATCH] regulator: Use regmap_read/write(), regmap_update_bits functions directly   Mark Brown
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Felipe Balbi
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Paul Walmsley
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Claudio Scordino
• [PATCH 40/41] ARM: restart: remove comments about adding code to arch_reset()   Jamie Iles
• [PATCH 41/41] ARM: restart: remove the now empty arch_reset()   Jamie Iles
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Voss, Nikolaus
• [PATCH v5 0/8] kexec fixes and soft restart code   Will Deacon
• [PATCH v5 1/8] Revert "ARM: 7098/1: kdump: copy kernel relocation code at the kexec prepare stage"   Will Deacon
• [PATCH v5 2/8] ARM: lib: add call_with_stack function for safely changing stack   Will Deacon
• [PATCH v5 3/8] ARM: idmap: populate identity map pgd at init time   Will Deacon
• [PATCH v5 4/8] ARM: reset: allow kernelspace mappings to be flat mapped during reset   Will Deacon
• [PATCH v5 5/8] ARM: reset: implement soft_restart for jumping to a physical address   Will Deacon
• [PATCH v5 6/8] ARM: soft_restart: disable the outer L2 when the last CPU is going down   Will Deacon
• [PATCH v5 7/8] ARM: stop: execute platform callback from cpu_stop code   Will Deacon
• [PATCH v5 8/8] ARM: kexec: use soft_restart for branching to the reboot buffer   Will Deacon
• [PATCH v3 0/8] Add support for tegra30 and cardhu   Stephen Warren
• [PATCH 2/2] ARM: highbank: convert logical CPU numbers to physical numbers   Rob Herring
• [PATCH] ARM: S3C6410: Use device names for both I2C clocks   Mark Brown
• [PATCH 2/2] ARM: highbank: convert logical CPU numbers to physical numbers   Will Deacon
• [PATCH 2/5] dma i.MX: remove individual SOC dependency   Vinod Koul
• [PATCH] ARM: S3C64XX: Raise the frequency of the second I2C bus on Cragganmore   Mark Brown
• [PATCH] arm: cpuidle34xx.c: Fix compile error   Joerg Roedel
• [RFC 3/6] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [RFC 6/6] ARM: vexpress: DT-based support for Coretile Express A5x2 (V2P-CA5s)   Pawel Moll
• [PATCH] ARM: S3C64XX: Use software initiated powerdown for Cragganmore   Mark Brown
• [PATCH] ARM: S3C64xx: Hook up platform data for Kilchomin module on Cragganmore   Mark Brown
• [PATCH v3 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Ramirez Luna, Omar
• [PATCH v4 0/7] iommu: split mapping to page sizes as supported by the hardware   Joerg Roedel
• [PATCH] ARM: S3C6410: Use device names for both I2C clocks   Thomas Abraham
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Jesper Nilsson
• [PATCH] ARM: S3C6410: Use device names for both I2C clocks   Mark Brown
• [PATCH v4 0/7] iommu: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v8 15/16] ARM: LPAE: add support for ATAG_MEM64   Stephen Boyd
• [GIT PULL v3] ARM: OMAP: Cortex-A9 PERIPHCLK node for 3.2   Tony Lindgren
• [PATCH v8 15/16] ARM: LPAE: add support for ATAG_MEM64   Catalin Marinas
• [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Clark, Rob
• [PATCH] distclean: Remove generated .dtb files   Dirk Behme
• [PATCH] arm: cpuidle34xx.c: Fix compile error   Kevin Hilman
• [PATCH] ARM: msm: Remove call to missing FPGA init on 8660   David Brown
• [PATCH v3 2/4] OMAP4: hwmod data: add mmu hwmod for ipu and dsp   Kevin Hilman
• [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanismch   Daniel Vetter
• [PATCH] arm: cpuidle34xx.c: Fix compile error   Joerg Roedel
• [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanismch   Russell King - ARM Linux
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Felipe Balbi
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Russell King - ARM Linux
• [PATCHv3 0/2] MSM8660/8960 DEBUG_LL support and cleanups   Stephen Boyd
• [PATCHv3 1/2] ARM: msm: Consolidate and move DEBUG_LL to DEBUG_LL choice   Stephen Boyd
• [PATCHv3 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960   Stephen Boyd
• [RFC] clocktree representation in the devicetree   Grant Likely
• [PATCH 0/8] MSM timer fixes and cleanups   Stephen Boyd
• [PATCH 1/8] msm: timer: Tighten #ifdef for local timer support   Stephen Boyd
• [PATCH 2/8] msm: timer: Cleanup #includes and #defines   Stephen Boyd
• [PATCH 3/8] msm: timer: Use GPT for clockevents and DGT for clocksource   Stephen Boyd
• [PATCH 4/8] msm: timer: Fix ONESHOT mode interrupts   Stephen Boyd
• [PATCH 5/8] msm: timer: Remove msm_clocks[] and simplify code   Stephen Boyd
• [PATCH 6/8] msm: timer: Remove SoC specific #ifdefs   Stephen Boyd
• [PATCH 7/8] msm: timer: Setup interrupt after registering clockevent   Stephen Boyd
• [PATCH 8/8] msm: timer: Use clockevents_config_and_register()   Stephen Boyd
• [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanismch   Daniel Vetter
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Felipe Balbi
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Russell King - ARM Linux
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Felipe Balbi
• [PATCHv3 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960   Nicolas Pitre
• [PATCHv3 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960   Stephen Boyd
• [PATCH v7 17/21] OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos   Kevin Hilman
• [PATCH] arm: omap2: fix build failure   Kevin Hilman
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Russell King - ARM Linux
• [GIT PULL] gpio/omap: minor cleanups for v3.2   Kevin Hilman
• [PATCH 00/10] cpufreq: OMAP: move into drivers, cleanups/fixes for v3.2   Kevin Hilman
• [GIT PULL] gpio/omap: minor cleanups for v3.2   Grant Likely
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Felipe Balbi
• [PATCH 00/10] cpufreq: OMAP: move into drivers, cleanups/fixes for v3.2   Dave Jones
• [PATCHv3 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960   David Brown
• [PATCH] OMAP4: I2C: Enable FIFO usage for OMAP4   Kevin Hilman
• [PATCHv3 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960   Nicolas Pitre
• [PATCH 2/5] dma i.MX: remove individual SOC dependency   Uwe Kleine-König
• [PATCH 2/5] dma i.MX: remove individual SOC dependency   Michał Mirosław
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Russell King - ARM Linux
• [PATCH] ARM: mm: update CONTEXTIDR register to contain PID of current process   Catalin Marinas
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Ryan Mallon
• [PATCH v6 09/11] ARM: pxa: change gpio to platform device   Russell King - ARM Linux
• [PATCH v6 11/11] ARM: pxa: add clk support in gpio driver   Russell King - ARM Linux
• [PATCH v8 15/16] ARM: LPAE: add support for ATAG_MEM64   Nicolas Pitre
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Ryan Mallon
• [PATCH v6 00/11] change pxa gpio to platform driver   Marek Vasut
• [PATCH v6 00/11] change pxa gpio to platform driver   Marek Vasut
• [PATCH] ARM: OMAP: PM: only register TWL with voltage layer when device is present   Kevin Hilman
• [PATCH v8 15/16] ARM: LPAE: add support for ATAG_MEM64   Will Deacon
• Broken mx5_defconfig on 3.2-rc1   Fabio Estevam
• Broken imx_v4_v5_defconfig on 3.2-rc1   Fabio Estevam
• [RFC 0/8] Initial DT clock bindings   Grant Likely
• Broken imx_v4_v5_defconfig on 3.2-rc1   Shawn Guo
• [GIT PULL] mxs: fixes for v3.2-rc2   Shawn Guo
• [PATCH v6 00/11] change pxa gpio to platform driver   Haojian Zhuang
• [PATCH v6 09/11] ARM: pxa: change gpio to platform device   Haojian Zhuang
• [PATCH v6 11/11] ARM: pxa: add clk support in gpio driver   Haojian Zhuang
• [RFC 7/8] arm/clkdev: lookup clocks from OF clock providers   Rob Herring
• [PATCH v7 00/11] change pxa gpio to platform driver   Haojian Zhuang
• [PATCH v7 01/11] ARM: mmp: fix build error on gpio   Haojian Zhuang
• [PATCH v7 02/11] ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ   Haojian Zhuang
• [PATCH v7 03/11] ARM: pxa: use chained interrupt for GPIO0 and GPIO1   Haojian Zhuang
• [PATCH v7 04/11] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Haojian Zhuang
• [PATCH v7 05/11] ARM: pxa: recognize gpio number and type   Haojian Zhuang
• [PATCH v7 06/11] ARM: pxa: rename NR_BUILTIN_GPIO   Haojian Zhuang
• [PATCH v7 07/11] ARM: pxa: use little endian read write in gpio driver   Haojian Zhuang
• [PATCH v7 08/11] ARM: pxa: use generic gpio operation instead of gpio register   Haojian Zhuang
• [PATCH v7 09/11] ARM: pxa: change gpio to platform device   Haojian Zhuang
• [PATCH v7 10/11] ARM: mmp: clear gpio edge detect   Haojian Zhuang
• [PATCH v7 11/11] ARM: pxa: add clk support in gpio driver   Haojian Zhuang
• [RFC 6/8] of: add clock providers   Rob Herring
• [PATCH] ARM: arch.h: Include irq.h   Fabio Estevam
• [PATCHv3 2/2] msm: Support DEBUG_LL on MSM8660 and MSM8960   Stephen Boyd
• [03: PATCH 0/5] The remaining stuff   Kukjin Kim
• [alsa-devel] [PATCH v3 0/3] ARM: mxs: add recording support for saif   Dong Aisheng
• [PATCH] ARM: arch.h: Include irq.h   Russell King - ARM Linux
• [RFC 5/5] iommu/omap: eliminate the public omap_find_iommu_device() method   Ohad Ben-Cohen
• [RFC 6/8] of: add clock providers   Sascha Hauer
• [RFC 4/5] ARM: OMAP3: bind omap3isp_device to its iommu device   Laurent Pinchart
• [RFC 5/5] iommu/omap: eliminate the public omap_find_iommu_device() method   Laurent Pinchart
• [RFC 4/5] ARM: OMAP3: bind omap3isp_device to its iommu device   Ohad Ben-Cohen
• [RFC 8/8] dt/arm: versatile add clock parsing   Sascha Hauer
• [PATCH] ARM: OMAP: omap_device: Expose omap_device_{alloc, delete, register}   Ohad Ben-Cohen
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Ming Lei
• [PATCHv4 00/13] VIC DT binding and MULTI_IRQ_HANDLER   Jamie Iles
• [PATCH] ARM: OMAP: PM: only register TWL with voltage layer when device is present   Premi, Sanjeev
• [PATCHv4 08/13] ARM: spear: convert to MULTI_IRQ_HANDLER   Viresh Kumar
• [PATCHv4] AT91: Add a driver for the ADC   Maxime Ripard
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCHv4 10/13] ARM: versatile: convert to MULTI_IRQ_HANDLER   Marc Zyngier
• [PATCH] ARM: kprobes: Fix build error in test code   Jon Medhurst (Tixy)
• [PATCH 0/6] PL022 updates   Linus Walleij
• [PATCH 1/6] spi/pl022: only enable RX interrupts when TX is complete   Linus Walleij
• [PATCH 2/6] spi/pl022: fix build warnings   Linus Walleij
• [PATCH 3/6] spi/pl022: disable the PL022 block when unused   Linus Walleij
• [PATCH 4/6] spi/pl022: skip default configuration before suspending   Linus Walleij
• [PATCH 5/6] spi/pl022: move device disable to workqueue thread   Linus Walleij
• [PATCH 6/6] spi/pl022: add support for pm_runtime autosuspend   Linus Walleij
• [PATCH v8 15/16] ARM: LPAE: add support for ATAG_MEM64   Catalin Marinas
• [PATCH 1/6] spi/pl022: only enable RX interrupts when TX is complete   Viresh Kumar
• [PATCH 2/6] spi/pl022: fix build warnings   Viresh Kumar
• [PATCH 3/6] spi/pl022: disable the PL022 block when unused   Viresh Kumar
• [PATCH 4/6] spi/pl022: skip default configuration before suspending   Viresh Kumar
• [PATCH 5/6] spi/pl022: move device disable to workqueue thread   Viresh Kumar
• [PATCH 6/6] spi/pl022: add support for pm_runtime autosuspend   Viresh Kumar
• [PATCH] CPUIdle: Reevaluate C-states under CPU load to favor deeper C-states   Deepthi Dharwar
• [RFC 6/8] of: add clock providers   Cousson, Benoit
• [PATCHv4 07/13] ARM: s3c64xx: convert to MULTI_IRQ_HANDLER   Thomas Abraham
• [PATCH 2/5] dma i.MX: remove individual SOC dependency   Sascha Hauer
• [PATCH 2/5] dma i.MX: remove individual SOC dependency   Sascha Hauer
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Ming Lei
• [PATCHv4 07/13] ARM: s3c64xx: convert to MULTI_IRQ_HANDLER   Thomas Abraham
• [PATCH v3 1/3] ARM: mxs: add saif clkmux functions   Sascha Hauer
• [RFC 6/8] of: add clock providers   Sascha Hauer
• [PATCHv4 07/13] ARM: s3c64xx: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCH v2] ARM: arch.h: Declare 'pt_regs' locally   Fabio Estevam
• [PATCH v2] ARM: arch.h: Declare 'pt_regs' locally   Eric Miao
• [PATCHv4 07/13] ARM: s3c64xx: convert to MULTI_IRQ_HANDLER   Thomas Abraham
• [PATCH 4/6] spi/pl022: skip default configuration before suspending   Linus Walleij
• [PATCH] iMX28 Ethernet driver fix   Peter Horton
• [PATCH] ARM: hw_breakpoint: don't fault when debug is not powered   Linus Walleij
• [RFC 6/8] of: add clock providers   Rob Herring
• [PATCH] ARM: hw_breakpoint: don't fault when debug is not powered   Jon Medhurst (Tixy)
• [PATCH] ARM: hw_breakpoint: don't fault when debug is not powered   Will Deacon
• [PATCH v3 1/3] ARM: mxs: add saif clkmux functions   Dong Aisheng-B29396
• [RFC 6/8] of: add clock providers   Rob Herring
• [AT91 PULL] defconfig pullrequest   Jean-Christophe PLAGNIOL-VILLARD
• [PATCHv4 07/13] ARM: s3c64xx: convert to MULTI_IRQ_HANDLER   Rob Herring
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Claudio Scordino
• [PATCHv4 07/13] ARM: s3c64xx: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCH v3] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Marc Kleine-Budde
• [PATCH] ARM: NUC900: fix a building WARNING 'Found 1 section mismatch'.   Wan ZongShun
• [AT91 PULL] at91 fixes pull request   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Voss, Nikolaus
• [AT91 PULL] defconfig pullrequest   Olof Johansson
• [PATCH] ARM: kprobes: Fix build error in test code   Nicolas Pitre
• [PATCHJ] ARM: NUC900: add new MFP implement   Wan ZongShun
• [PATCH v3] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Fabio Estevam
• [PATCH v2] ARM: arch.h: Declare 'pt_regs' locally   Russell King - ARM Linux
• [PATCH] arm: dma: Drop GFP_COMP for DMA memory allocations   Stephen Warren
• [PATCH] CPUIdle: Reevaluate C-states under CPU load to favor deeper C-states   Chalhoub, Nicole
• [PATCH v2] ARM: arch.h: Declare 'pt_regs' locally   Fabio Estevam
• [PATCH v3] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Sascha Hauer
• [PATCH] arm/tegra: fix variable formatting in makefile   Olof Johansson
• [RFC 6/8] of: add clock providers   Tony Lindgren
• [PATCH] ARM: l2x0: fix compile error on !CONFIG_USE_OF   Olof Johansson
• [PATCH] ARM: mx28evk: Simplify GPIO requests for mx28evk_fec_reset   Fabio Estevam
• [PATCH V3 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Russell King - ARM Linux
• [PATCH 2/3] staging: nvec: add device tree support   Olof Johansson
• [PATCH] ARM: mx28evk: Simplify GPIO requests for mx28evk_fec_reset   Uwe Kleine-König
• CONFIG_CPU_FREQ_DEBUG   Paul Bolle
• [PATCH v3] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Marc Kleine-Budde
• [PATCH 2/3] staging: nvec: add device tree support   Greg KH
• [PATCH v4 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Felipe Balbi
• [PATCH] ARM: l2x0: fix compile error on !CONFIG_USE_OF   Rob Herring
• CONFIG_USB_GADGET_PXA27X   Paul Bolle
• [PATCH v2] ARM: mx28evk: Simplify GPIO requests for mx28evk_fec_reset   Fabio Estevam
• [PATCH v8 14/16] ARM: LPAE: mark memory banks with start > ULONG_MAX as highmem   Nicolas Pitre
• CONFIG_USB_MUSB_PERIPHERAL   Paul Bolle
• [PATCH] iMX28 Ethernet driver fix   David Miller
• [GIT PULL] arm/tegra fixes for 3.2-rc   Olof Johansson
• [PATCH v2] ARM: mx28evk: Simplify GPIO requests for mx28evk_fec_reset   Wolfram Sang
• Pet Peaves about Platform code, and arch_reset   Tony Lindgren
• PLEASE FIX: lack of trailing , on structure initializers   Tony Lindgren
• CONFIG_USB_GADGET_PXA27X   Felipe Balbi
• s3c2440 / s3c2416 broken   Paul Schilling
• [PATCH v4 2/4] drivers/i2c/busses/i2c-at91.c: add new driver   Ryan Mallon
• [PATCH 2/5] ARM: restart: omap: use new restart hook XXX WIP XXX   Tony Lindgren
• [PATCH 1/7] ARM: restart: add restart hook to machine_desc record   Tony Lindgren
• [PATCH 4/7] ARM: restart: move reboot failure handing into machine_restart()   Tony Lindgren
• [PATCH 5/7] ARM: restart: remove argument to setup_mm_for_reboot()   Tony Lindgren
• 3.2-rc1 boot broken on OMAP1 / Amstrad E3   Aaro Koskinen
• CONFIG_USB_GADGET_PXA27X   Haojian Zhuang
• 3.2-rc1 boot broken on OMAP1 / Amstrad E3   Tony Lindgren
• [PATCH] ARM: OMAP: Fix map_io for Amstrad E3   Tony Lindgren
• s3c2440 / s3c2416 broken   Paul Schilling
• [PATCH] ARM: OMAP: Fix map_io for Amstrad E3   Russell King - ARM Linux
• [PATCH] ARM: OMAP: Fix map_io for Amstrad E3   Aaro Koskinen
• [PATCH] ARM: OMAP: Fix map_io for Amstrad E3   Tony Lindgren
• s3c2440 / s3c2416 broken   Thomas Abraham
• [PATCH] ARM: OMAP: Fix map_io for Amstrad E3   Aaro Koskinen
• [PATCH 1/2] fs: binfmt_elf: Create Kconfig variable for PIE randomization.   H. Peter Anvin
• [AT91 PULL] defconfig pullrequest   Jean-Christophe PLAGNIOL-VILLARD
• [AT91 PULL] at91 fixes pull request   Olof Johansson
• [GIT PULL] imx compile fixes   Olof Johansson
• [GIT PULL] mxs: fixes for v3.2-rc2   Olof Johansson
• [GIT PULL] arm/tegra fixes for 3.2-rc   Olof Johansson
• [GIT PULL] msm fixes for 3.2   David Brown
• [GIT PULL] msm fixes for 3.2   Olof Johansson
• [PATCH] spi: QUP based bus driver for Qualcomm MSM chipsets   Harini Jayaraman
• [AT91 PULL] defconfig pullrequest   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] spi: QUP based bus driver for Qualcomm MSM chipsets   Bryan Huntsman
• [AT91 PULL] defconfig pullrequest   Olof Johansson
• [PATCH] mfd: add #ifdef CONFIG_DEBUG_FS guard for ab8500_debug_resources   Axel Lin
• [GIT PULL] arm-soc fixes for 3.2-rc   Olof Johansson
• [PATCH v4] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   wu guoxing
• [PATCH v4] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   y at shlinux1.ap.freescale.net
• [PATCH v4] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   wu guoxing
• [RFC PATCH] Generic clock parent enumeration   Richard Zhao
• [PATCH 1/2] ARM: EXYNOS4: convert MCT to percpu interrupt API   MyungJoo Ham
• [PATCH v3] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Wu Guoxing-B39297
• [PATCH] ARM: SAMSUNG: gpio-cfg.h: include linux/types.h   Axel Lin
• [PATCH 1/9] ARM: mxc: time: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 2/9] ARM: mxc: ahci: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 3/9] ARM: mxc: pwm: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 4/9] ARM: mxc: epit: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 5/9] ARM: mxc: arch_reset: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 6/9] ARM: mxc: audmux-v2: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 7/9] ARM: pm-imx5: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 8/9] ARM: mx31moboard: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 9/9] ARM: mxs: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 1/1] serial: imx: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 1/1] net: fec: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 1/1] i2c: imx: convert clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 1/1] mmc: sdhci-esdhc-imx: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V2 0/3] ASV support for Exynos4 series   Jongpill Lee
• [PATCH 1/3] ARM: EXYNOS4: Add ASV feature for Exynos4 series   Jongpill Lee
• [PATCH 2/3] ARM: EXYNOS4: Add clock for Exynos4210 asv feature   Jongpill Lee
• [PATCH 3/3] ARM: EXYNOS4: Support ASV for Exynos4210   Jongpill Lee
• [PATCH 1/3] ARM: EXYNOS: Add ASV feature for Exynos4 series   MyungJoo Ham
• [PATCH 1/3] ARM: EXYNOS: Add ASV feature for Exynos4 series   MyungJoo Ham
• CONFIG_USB_GADGET_PXA27X   Felipe Balbi
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   Kai Huang
• [PATCH v4 0/3] ARM: mxs: add recording support for saif   Dong Aisheng
• [PATCH v4 1/3] ARM: mxs: add saif clkmux functions   Dong Aisheng
• [PATCH v4 2/3] ARM: mx28evk: add platform data for saif   Dong Aisheng
• [PATCH v4 3/3] ARM: mx28evk: set a initial clock rate for saif   Dong Aisheng
• [PATCH v4 0/3] ARM: mxs: add recording support for saif   Dong Aisheng-B29396
• [PATCH v2] ARM: mx28evk: Simplify GPIO requests for mx28evk_fec_reset   Uwe Kleine-König
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• CONFIG_USB_GADGET_PXA27X   Eric Miao
• [PATCH] ARM: mx28evk: Simplify GPIO requests for mx28evk_fec_reset   Sascha Hauer
• [PATCH v2] ARM: mx28evk: Simplify GPIO requests for mx28evk_fec_reset   Sascha Hauer
• s3c2440 / s3c2416 broken   Heiko Stübner
• [PATCH 1/9] ARM: mxc: time: convert to clk_prepare/clk_unprepare   Sascha Hauer
• [PATCH 1/1] serial: imx: convert to clk_prepare/clk_unprepare   Sascha Hauer
• CONFIG_USB_GADGET_PXA27X   Felipe Balbi
• [PATCH] ARM: mx28evk: Simplify GPIO requests for mx28evk_fec_reset   Dong Aisheng-B29396
• [PATCH 1/9] ARM: mxc: time: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 1/1] serial: imx: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH v4 2/3] ARM: mx28evk: add platform data for saif   Sascha Hauer
• [PATCH 0/4] imx: a few fixes for v3.2-rc   Shawn Guo
• [PATCH 1/4] arm/imx: fix mx3_defconfig to add FEC back   Shawn Guo
• [PATCH 2/4] arm/imx: fix the references to ARCH_MX3   Shawn Guo
• [PATCH 3/4] arm/imx: fix AUTO_ZRELADDR selection   Shawn Guo
• [PATCH 4/4] arm/imx: fix imx6q mmc error when mounting rootfs   Shawn Guo
• [PATCH] mfd: add #ifdef CONFIG_DEBUG_FS guard for ab8500_debug_resources   Linus Walleij
• [PATCH] ARM: mx28evk: Simplify GPIO requests for mx28evk_fec_reset   Sascha Hauer
• [PATCH 1/4] arm/imx: fix mx3_defconfig to add FEC back   Richard Zhao
• [PATCH 2/4] arm/imx: fix the references to ARCH_MX3   Sascha Hauer
• [PATCH 1/4] arm/imx: fix mx3_defconfig to add FEC back   Uwe Kleine-König
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Paul Walmsley
• [PATCH] merge i.MX5 into mach-imx   Sascha Hauer
• [PATCH 1/3] ARM i.MX5: remove unnecessary includes from board files   Sascha Hauer
• [PATCH 2/3] ARM i.MX: Merge i.MX5 support into mach-imx   Sascha Hauer
• [PATCH 3/3] ARM i.MX: Update defconfig   Sascha Hauer
• [PATCH] Proposed patch for USB and RS485 on imx board   Aurelien Bouin
• [PATCH 2/3] ARM i.MX: Merge i.MX5 support into mach-imx   Sascha Hauer
• [PATCH] Proposed patch for USB and RS485 on imx board   Wolfram Sang
• [PATCH v4 2/3] ARM: mx28evk: add platform data for saif   Dong Aisheng-B29396
• [PATCH v4-rebased 0/7] iommu: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v4-rebased 1/7] iommu/core: stop converting bytes to page order back and forth   Ohad Ben-Cohen
• [PATCH v4-rebased 2/7] iommu/core: split mapping to page sizes as supported by the hardware   Ohad Ben-Cohen
• [PATCH v4-rebased 3/7] iommu/omap: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v4-rebased 4/7] iommu/msm: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v4-rebased 5/7] iommu/amd: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v4-rebased 6/7] iommu/intel: announce supported page sizes   Ohad Ben-Cohen
• [PATCH v4-rebased 7/7] iommu/core: remove the temporary pgsize settings   Ohad Ben-Cohen
• [PATCH v3 0/4] dmaengine: Device Tree support for Atmel DMA   Vinod Koul
• [PATCH 1/2] ARM: EXYNOS4: convert MCT to percpu interrupt API   Marc Zyngier
• [PATCH] DMA: PL330: Fix build warning   Vinod Koul
• [GIT PULL] picoxcell fixes for 3.2-rc   Jamie Iles
• [PATCH] DMA: PL330: Fix build warning   Joe Perches
• [PATCH v4] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Marc Kleine-Budde
• [PATCH v5] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   wu guoxing
• [PATCH v4] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Wolfram Sang
• [PATCH v4 2/3] ARM: mx28evk: add platform data for saif   Sascha Hauer
• [PATCH] Solve compilation problem when using host usb with mx27 boards   Aurelien Bouin
• [PATCH v6] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   wu guoxing
• [RFC PATCH] Generic clock parent enumeration   Domenico Andreoli
• [PATCH v4] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Wu Guoxing-B39297
• [alsa-devel] [PATCH v4 2/3] ARM: mx28evk: add platform data for saif   Dong Aisheng-B29396
• [PATCH v4] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Wu Guoxing-B39297
• [PATCH v4] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Wolfram Sang
• [PATCH] spi/s3c64xx: Log error interrupts   Mark Brown
• [PATCH 1/2] MAINTAINERS: Add linux-samsung-soc mailing list for Samsung   Mark Brown
• [PATCH 2/2] MAINTAINERS: Extend Samsung patterns to cover SPI and ASoC drivers   Mark Brown
• [PATCH v6] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   wu guoxing
• [PATCH v4] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Wu Guoxing-B39297
• [V1] mfd: Convert pm860x to use regmap api   Jett.Zhou
• [PATCH v6] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Marc Kleine-Budde
• [PATCH v7 17/21] OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos   Govindraj
• [PATCH 1/3 V2] ARM: pxa: Add DT support to pxa2xx-uart   Russell King - ARM Linux
• [PATCH v6] ARM/mx35/3ds: gpio: add mc9s08dz60 gpio function   Wu Guoxing-B39297
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   cody
• [PATCH v2 1/2] OMAP2+: DMA: Workaround for invalid source position   Jarkko Nikula
• [PATCH v2 1/2] OMAP2+: DMA: Workaround for invalid source position   Jarkko Nikula
• [V1] mfd: Convert pm860x to use regmap api   Mark Brown
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   Joerg Roedel
• [PATCH 4/4] arm/imx: fix imx6q mmc error when mounting rootfs   Dirk Behme
• machine_halt issue   Yegor Yefremov
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   cody
• [PATCHv4 02/13] ARM: vic: device tree binding   Jamie Iles
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   Joerg Roedel
• [PATCHv4 07/13] ARM: s3c64xx: convert to MULTI_IRQ_HANDLER   Jamie Iles
• [PATCH 4/4] arm/imx: fix imx6q mmc error when mounting rootfs   Jason Liu
• [PATCHv4 02/13] ARM: vic: device tree binding   Marc Zyngier
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   David Woodhouse
• [PATCH] mmc: mmci: Fixup handling of MCI_STARTBITERR   Ulf Hansson
• s3c2440 / s3c2416 broken   Paul Schilling
• [PATCH] mmc: mmci: Increase max_segs from 16 to 128   Ulf Hansson
• [PATCHv4 07/13] ARM: s3c64xx: convert to MULTI_IRQ_HANDLER   Thomas Abraham
• [PATCH] mmc: mmci: Support MMC_PM_KEEP_POWER   Ulf Hansson
• s3c2440 / s3c2416 broken   Thomas Abraham
• [PATCHv4 02/13] ARM: vic: device tree binding   Jamie Iles
• [PATCH 1/3 V2] ARM: pxa: Add DT support to pxa2xx-uart   Marek Vasut
• [PATCH 1/3 V2] ARM: pxa: Add DT support to pxa2xx-uart   Rob Herring
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   Joerg Roedel
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Jonathan Cameron
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Jonathan Cameron
• [PATCH] ARM: OMAP: omap_device: Expose omap_device_{alloc, delete, register}   Kevin Hilman
• [PATCH-V4 0/3] Introducing TI's New SoC/board AM335XEVM   Vaibhav Hiremath
• [PATCH-V4 1/3] arm:omap:am33xx: Update common OMAP machine specific sources   Vaibhav Hiremath
• [PATCH-V4 2/3] arm:omap:am33xx: Add AM335XEVM machine support   Vaibhav Hiremath
• [PATCH-V4 3/3] arm:omap:am33xx: Add low level debugging support   Vaibhav Hiremath
• [PATCH 0/8] MSM timer fixes and cleanups   David Brown
• [PATCH] ARM: OMAP: PM: only register TWL with voltage layer when device is present   Kevin Hilman
• [PATCH Resend 1/2] fs: binfmt_elf: Create Kconfig variable for PIE randomization.   David Daney
• [PATCH v7 17/21] OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos   Kevin Hilman
• [PATCH 0/8] MSM timer fixes and cleanups   Stephen Boyd
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   David Woodhouse
• [PATCH] ARM: OMAP: Fix dpll_data compile error when omap2 only is selected   Tony Lindgren
• [PATCH 2/3] mmc: sdhci-pxa: Add SDHCI driver for PXA16x   Chris Ball
• [PATCH v5 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   Felipe Balbi
• [PATCH] ARM: OMAP: Introduce local common.h files   Tony Lindgren
• [PATCH] ARM: OMAP: Introduce local common.h files   Russell King - ARM Linux
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   Stepan Moskovchenko
• [PATCH] ARM: OMAP: Introduce local common.h files   Tony Lindgren
• [PATCH v8 07/16] ARM: LPAE: Introduce the 3-level page table format definitions   Nicolas Pitre
• [PATCH v8 08/16] ARM: LPAE: Page table maintenance for the 3-level format   Nicolas Pitre
• [PATCH] ARM: OMAP: Fix map_io for Amstrad E3   Aaro Koskinen
• [PATCH] ARM: mini2440: Fix Kconfig select of LEDS_TRIGGER   Paul Bolle
• ioremap on system memory   Ryan Mallon
• [PATCH v8 09/16] ARM: LPAE: MMU setup for the 3-level page table format   Nicolas Pitre
• [PATCH] ARM: OMAP: Introduce local common.h files   Russell King - ARM Linux
• [PATCH 2/5] ARM: restart: omap: use new restart hook XXX WIP XXX   Russell King - ARM Linux
• [PATCH v8 09/16] ARM: LPAE: MMU setup for the 3-level page table format   Russell King - ARM Linux
• [PATCH v8 02/16] ARM: pgtable: Fix compiler warning in ioremap.c introduced by nopud   Russell King - ARM Linux
• [PATCH v8 04/16] ARM: LPAE: Move the FSR definitions to separate files   Russell King - ARM Linux
• [PATCH v8 11/16] ARM: LPAE: Add fault handling support   Russell King - ARM Linux
• [PATCH v8 13/16] ARM: LPAE: Add identity mapping support for the 3-level page table format   Russell King - ARM Linux
• [PATCH v8 16/16] ARM: LPAE: Add the Kconfig entries   Russell King - ARM Linux
• [PATCH 3/5] ARM: restart: exynos4: use new restart hook XXX WIP XXX WHY IS THERE NO LOCAL HEADERS IN arch/arm/mach-exynos4 XXX   Russell King - ARM Linux
• [PATCH] ARM: mach-s3c2440: drop selects of bogus Kconfig symbols   Paul Bolle
• [PATCH] ARM: OMAP: Fix map_io for Amstrad E3   Tony Lindgren
• [PATCH] ARM: OMAP: Fix map_io for Amstrad E3   Janusz Krzysztofik
• [PATCH] ARM: OMAP: Introduce local common.h files   Tony Lindgren
• [PATCH 1/2] ARM: EXYNOS4: convert MCT to percpu interrupt API   MyungJoo Ham
• [PATCH 40/41] ARM: restart: remove comments about adding code to arch_reset()   Tony Lindgren
• [PATCH 41/41] ARM: restart: remove the now empty arch_reset()   Tony Lindgren
• [PATCH v8 04/16] ARM: LPAE: Move the FSR definitions to separate files   Tony Lindgren
• [PATCH v7 11/21] OMAP2+: UART: Move errata handling from serial.c to omap-serial   Jon Hunter
• [PATCH] ARM: OMAP: omap_device: Expose omap_device_{alloc, delete, register}   Ohad Ben-Cohen
• [PATCH V2 00/14] add clk_prepare/clk_unprepare to imx drivers   Richard Zhao
• [PATCH V2 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare   Richard Zhao
• [PATCH V2 02/14] ARM: mxc: time: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V2 03/14] ARM: mxc: ahci: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V2 04/14] ARM: mxc: pwm: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V2 05/14] ARM: mxc: epit: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V2 06/14] ARM: mxc: arch_reset: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V2 07/14] ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V2 08/14] ARM: pm-imx5: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V2 09/14] ARM: mx31moboard: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V2 10/14] ARM: mxs: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V2 11/14] serial: imx: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V2 12/14] net: fec: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V2 13/14] i2c: imx: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V2 14/14] mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare   Richard Zhao
• Pet Peaves about Platform code, and arch_reset   Shawn Guo
• [PATCH v2 1/3] ARM: pxa168: Add SDHCI support   Eric Miao
• [PATCH 3/3] ARM: EXYNOS4: Support ASV for Exynos4210   MyungJoo Ham
• [V1] mfd: Convert pm860x to use regmap api   Haojian Zhuang
• [PATCH v2 1/3] ARM: pxa168: Add SDHCI support   Chris Ball
• [PATCH 24/41] ARM: restart: mxs: use new restart hook   Shawn Guo
• [PATCH] arm/imx: remove imx_idle hook and use pm_idle instead   Shawn Guo
• [V2] mfd: Convert pm860x to use regmap api   Jett.Zhou
• [PATCH v4 2/3] ARM: mx28evk: add platform data for saif   Shawn Guo
• [PATCH v7 11/21] OMAP2+: UART: Move errata handling from serial.c to omap-serial   Shubhrajyoti
• [PATCH 4/4] ARM: exynos4: remove useless code to save/restore L2 and GIC state   Amit Kachhap
• [PATCH V2 0/5] ARM: exynos4: Add l2 retention mode cpuidle state   Amit Daniel Kachhap
• [PATCH V2 1/5] ARM: exynos4: Add support for AFTR mode cpuidle state   Amit Daniel Kachhap
• [PATCH V2 2/5] ARM: exynos4: remove useless churn in sleep.S   Amit Daniel Kachhap
• [PATCH V2 3/5] ARM: exynos4: add L2 early resume code   Amit Daniel Kachhap
• [PATCH V2 4/5] ARM: exynos4: remove useless code to save/restore L2   Amit Daniel Kachhap
• [PATCH V2 5/5] ARM: exynos4: Enable l2 configuration through device tree   Amit Daniel Kachhap
• ioremap on system memory   Marcus Folkesson
• [PATCH v4 1/3] ARM: mxs: add saif clkmux functions   Shawn Guo
• [PATCH 1/4] arm/imx: fix mx3_defconfig to add FEC back   Shawn Guo
• [PATCH v4 1/3] ARM: mxs: add saif clkmux functions   Dong Aisheng-B29396
• [PATCH 1/4] ARM: exynos4: Add support for AFTR mode cpuidle state   MyungJoo Ham
• [PATCH v2] arm/imx: fix the references to ARCH_MX3   Shawn Guo
• [V3 0/2] mfd 88pm860x bugfix and regmap   Jett.Zhou
• [PATCH v4 1/3] ARM: mxs: add saif clkmux functions   Shawn Guo
• [PATCH 4/4] arm/imx: fix imx6q mmc error when mounting rootfs   Shawn Guo
• [PATCH] merge i.MX5 into mach-imx   Shawn Guo
• [V3 0/2] mfd 88pm860x bugfix and regmap   Jett.Zhou
• [PATCH] Solve compilation problem when using host usb with mx27 boards   Shawn Guo
• [PATCH V2 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare   Sascha Hauer
• [V3 2/2] mfd: Convert 88pm860x to use regmap api   Mark Brown
• [PATCH] arm/imx: remove imx_idle hook and use pm_idle instead   Russell King - ARM Linux
• [PATCH V2 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare   Richard Zhao
• [PATCH V2 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare   Sascha Hauer
• [GIT PULL] arm/mx35/3ds: GPIO : add mc9s08dz60 gpio function   s.hauer at pengutronix.de
• [PATCH 1/1] ASoC: mxs-saif: remove function in platform_data   Dong Aisheng
• [PATCH 1/2] ARM: mach-imx: convert logical CPU numbers to physical numbers   Sascha Hauer
• [PATCH v5 0/3] ARM: mxs: add recording support for saif   Dong Aisheng
• [PATCH v5 1/3] ARM: mxs: add saif clkmux functions   Dong Aisheng
• [PATCH v5 2/3] ARM: mx28evk: add platform data for saif   Dong Aisheng
• [PATCH v5 3/3] ARM: mx28evk: set a initial clock rate for saif   Dong Aisheng
• [GIT PULL] arm/mx35/3ds: GPIO : add mc9s08dz60 gpio function   Wu Guoxing-B39297
• [RFC][PATCH] gpiolib: add irq_wake (power-management) sysfs file   Patrick Combes
• [PATCH v8 00/20] OMAP2+: UART: Runtime adaptation + cleanup   Govindraj.R
• [PATCH v8 01/20] OMAP2+: UART: cleanup + remove uart pm specific API   Govindraj.R
• [PATCH v8 02/20] OMAP2+: UART: cleanup 8250 console driver support   Govindraj.R
• [PATCH v8 03/20] OMAP2+: UART: Cleanup part of clock gating mechanism for uart   Govindraj.R
• [PATCH v8 04/20] OMAP2+: UART: Add default mux for all uarts.   Govindraj.R
• [PATCH v8 05/20] OMAP2+: UART: Remove mapbase/membase fields from pdata.   Govindraj.R
• [PATCH v8 06/20] OMAP2+: UART: Add runtime pm support for omap-serial driver   Govindraj.R
• [PATCH v8 07/20] OMAP2+: UART: Remove context_save and move context restore to driver   Govindraj.R
• [PATCH v8 08/20] OMAP2+: UART: Ensure all reg values configured are available from port structure   Govindraj.R
• [PATCH v8 09/20] OMAP2+: UART: Remove uart reset function.   Govindraj.R
• [PATCH v8 10/20] OMAP2+: UART: Get context loss count to context restore   Govindraj.R
• [PATCH v8 11/20] OMAP2+: UART: Move errata handling from serial.c to omap-serial   Govindraj.R
• [PATCH v8 12/20] OMAP2+: UART: Add wakeup mechanism for omap-uarts   Govindraj.R
• [PATCH v8 13/20] OMAP2+: UART: Remove old and unused clocks handling funcs   Govindraj.R
• [PATCH v8 14/20] OMAP2+: UART: Allow UART parameters to be configured from board file.   Govindraj.R
• [PATCH v8 15/20] OMAP2+: UART: Make the RX_TIMEOUT for DMA configurable for each UART   Govindraj.R
• [PATCH v8 16/20] OMAP2+: UART: remove temporary variable used to count uart instance   Govindraj.R
• [PATCH v8 17/20] OMAP2+: UART: Use custom activate func for console uart.   Govindraj.R
• [PATCH v8 18/20] OMAP2+: UART: Avoid uart idling on suspend for no_console_suspend usecase   Govindraj.R
• [PATCH v8 19/20] OMAP2+: UART: Do not gate uart clocks if used for debug_prints   Govindraj.R
• [PATCH v8 20/20] OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos   Govindraj.R
• [PATCH 1/2] ARM: EXYNOS4: convert MCT to percpu interrupt API   Marc Zyngier
• [PATCH 1/2] ARM: mach-imx: convert logical CPU numbers to physical numbers   Will Deacon
• [PATCH 1/4] arm/imx: fix mx3_defconfig to add FEC back   Uwe Kleine-König
• [PATCH] Add dm9000 network support for OK6410 board.   peiyong feng
• [PATCH v7 11/21] OMAP2+: UART: Move errata handling from serial.c to omap-serial   Govindraj
• [PATCH V2 1/5] ARM: exynos4: Add support for AFTR mode cpuidle state   Lorenzo Pieralisi
• [PATCH v7 17/21] OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos   Govindraj
• [PATCH] ARM: OMAP: PM: only register TWL with voltage layer when device is present   Premi, Sanjeev
• [PATCH V2 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare   Russell King - ARM Linux
• [PATCH v8 07/16] ARM: LPAE: Introduce the 3-level page table format definitions   Catalin Marinas
• [PATCH V3 00/14] add clk_prepare/clk_unprepare to imx drivers   Richard Zhao
• [PATCH V3 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare   Richard Zhao
• [PATCH V3 02/14] ARM: mxc: time: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V3 03/14] ARM: mxc: ahci: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V3 04/14] ARM: mxc: pwm: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V3 05/14] ARM: mxc: epit: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V3 06/14] ARM: mxc: arch_reset: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V3 07/14] ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V3 08/14] ARM: pm-imx5: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V3 09/14] ARM: mx31moboard: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V3 10/14] ARM: mxs: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V3 11/14] serial: imx: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V3 12/14] net: fec: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V3 13/14] i2c: imx: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V3 14/14] mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH v8 08/16] ARM: LPAE: Page table maintenance for the 3-level format   Catalin Marinas
• [PATCH 1/2] ARM: mach-imx: convert logical CPU numbers to physical numbers   Will Deacon
• [PATCH v8 09/16] ARM: LPAE: MMU setup for the 3-level page table format   Catalin Marinas
• [PATCH v2] ARM: highbank: convert logical CPU numbers to physical numbers   Will Deacon
• [PATCH V2 1/5] ARM: exynos4: Add support for AFTR mode cpuidle state   Amit Kachhap
• [PATCH v8 09/16] ARM: LPAE: MMU setup for the 3-level page table format   Catalin Marinas
• [PATCH v4 00/10] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH v4 01/10] arm/tegra: initial device tree for tegra30   Peter De Schrijver
• [PATCH v4 02/10] arm/tegra: cleanup tegra20 support   Peter De Schrijver
• [PATCH v4 03/10] arm/tegra: prepare clock code for multiple tegra variants   Peter De Schrijver
• [PATCH v4 04/10] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [PATCH v4 05/10] arm/tegra: rename tegra20 pinmux files   Peter De Schrijver
• [PATCH v4 06/10] arm/tegra: prepare pinmux code for multiple tegra variants   Peter De Schrijver
• [PATCH v4 07/10] arm/tegra: add new fields to struct tegra_pingroup_desc   Peter De Schrijver
• [PATCH v4 08/10] arm/tegra: pinmux tables and definitions for tegra30   Peter De Schrijver
• [PATCH v4 09/10] arm/tegra: implement support for tegra30   Peter De Schrijver
• [PATCH v4 10/10] arm/tegra: add support for tegra30 based board cardhu   Peter De Schrijver
• [PATCH v8 13/16] ARM: LPAE: Add identity mapping support for the 3-level page table format   Catalin Marinas
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Will Deacon
• [PATCH 4/4] ARM: exynos4: remove useless code to save/restore L2 and GIC state   Sylwester Nawrocki
• [PATCH v4 04/10] arm/tegra: prepare early init for multiple tegra variants   Jamie Iles
• [PATCH v8 16/16] ARM: LPAE: Add the Kconfig entries   Catalin Marinas
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Jamie Iles
• [PATCH v3] ARM: support XZ compressed kernels   Imre Kaloz
• [PATCH V2 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare   Sascha Hauer
• [PATCH v8 13/16] ARM: LPAE: Add identity mapping support for the 3-level page table format   Will Deacon
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Will Deacon
• [PATCH] ARM: pxa168/gplugd: add the correct SSP device   Eric Miao
• [PATCH] ARM: mmp: fix gpio-pxa.h build errors   Eric Miao
• [GIT PULL] VIC DT+MULTI_IRQ_HANDLER patches   Jamie Iles
• [PATCH] ARM: mmp: fix gpio-pxa.h build errors   Haojian Zhuang
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Jonathan Cameron
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   Joerg Roedel
• [PATCH] ARM: mmp: fix gpio-pxa.h build errors   Eric Miao
• [PATCH] Add dm9000 network support for OK6410 board.   Thomas Abraham
• [PATCH 1/2] ARM: mach-imx: convert logical CPU numbers to physical numbers   Shawn Guo
• [GIT PULL] VIC DT+MULTI_IRQ_HANDLER patches   Marc Zyngier
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   Joerg Roedel
• [PATCH v8 16/16] ARM: LPAE: Add the Kconfig entries   Russell King - ARM Linux
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   David Woodhouse
• [PATCH 1/2] ARM: mach-imx: convert logical CPU numbers to physical numbers   Will Deacon
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   Joerg Roedel
• [PATCH V2 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare   Richard Zhao
• [REPOST PATCH] ARM: gic: allow GIC to support non-banked setups   Marc Zyngier
• [PATCH v2] mmc mxcmmc: fix falling back to PIO   Sascha Hauer
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Cousson, Benoit
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Will Deacon
• [GIT PULL] VIC DT+MULTI_IRQ_HANDLER patches   Thomas Abraham
• [PATCH 1/1] ASoC: mxs-saif: remove function in platform_data   Sascha Hauer
• [PATCH] mach-ux500: add devicetree compat nodes   Niklas Hernaeus
• [PATCH 1/2] ARM: mx28evk: remove flexcan_pdata __initconst attribute   Uwe Kleine-König
• [PATCH v2] ARM: pxa: add support for Raumfeld DDX   Daniel Mack
• [GIT PULL] VIC DT+MULTI_IRQ_HANDLER patches   Jamie Iles
• [PATCH 1/2] ARM: mx28evk: remove flexcan_pdata __initconst attribute   Dong Aisheng
• [PATCH 2/2] ARM: mxs: remove mmc_platform_data __initdata attribute   Dong Aisheng
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Cousson, Benoit
• [PATCH v2] mmc mxcmmc: fix falling back to PIO   Lothar Waßmann
• [PATCH] fix compilation breakage in entry-armv.S   Dave Martin
• [GIT PULL] VIC DT+MULTI_IRQ_HANDLER patches   Marc Zyngier
• [PATCH] mmc: mmci: Fixup handling of MCI_STARTBITERR   Linus Walleij
• [PATCH] mach-ux500: add devicetree compat nodes   Rob Herring
• [PATCH] mach-ux500: add devicetree compat nodes   Niklas Hernaeus
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Will Deacon
• [PATCH 1/2] ARM: mx28evk: remove flexcan_pdata __initconst attribute   Dong Aisheng-B29396
• [PATCH 1/2] ARM: mx28evk: remove flexcan_pdata __initconst attribute   Russell King - ARM Linux
• [PATCH] mmc mxcmmc: fix falling back to PIO   Sascha Hauer
• [PATCH v2] mmc mxcmmc: fix falling back to PIO   Sascha Hauer
• [PATCH] mmc: mmci: Increase max_segs from 16 to 128   Linus Walleij
• [PATCH 1/2] ARM: mx28evk: remove flexcan_pdata __initconst attribute   Dong Aisheng-B29396
• [PATCH 1/2] ARM: mx28evk: remove flexcan_pdata __initconst attribute   Russell King - ARM Linux
• [PATCH 1/2] ARM: mx28evk: remove flexcan_pdata __initconst attribute   Dong Aisheng-B29396
• [PATCH 1/2] ARM: mx28evk: remove flexcan_pdata __initconst attribute   Uwe Kleine-König
• [REPOST PATCH] ARM: gic: allow GIC to support non-banked setups   Rob Herring
• [PATCH v2] ARM: highbank: convert logical CPU numbers to physical numbers   Rob Herring
• [GIT PULL] i.MX fixes   Sascha Hauer
• [PATCH 1/4] arm/imx: fix mx3_defconfig to add FEC back   Sascha Hauer
• [PATCH] mach-ux500: add devicetree compat nodes   Linus Walleij
• [PATCH] ARM: pxa168/gplugd: add the correct SSP device   Tanmay Upadhyay
• [PATCH 1/2] ARM: mxs/tx28: add __initconst for fec pdata   Dong Aisheng
• [PATCH 2/2] ARM: mx5: add __initconst for fec pdata   Dong Aisheng
• [PATCH] mmc mxcmmc: fix falling back to PIO   Chris Ball
• [PATCH] mach-ux500: add devicetree compat nodes   Rob Herring
• [PATCH] ARM: OMAP: Introduce local common.h files   Russell King - ARM Linux
• what causes an "imprecise external abort"   EXTERNAL Waechtler Peter (Fa. TCP, CM-AI/PJ-CF31)
• [PATCH] mach-ux500: add devicetree compat nodes   Linus Walleij
• [REPOST PATCH] ARM: gic: allow GIC to support non-banked setups   Marc Zyngier
• [PATCH] mach-ux500: add devicetree compat nodes   Rob Herring
• [PATCH] ARM: OMAP: Introduce local common.h files   Tony Lindgren
• [GIT PULL] picoxcell fixes for 3.2-rc   Olof Johansson
• [PATCH] mach-ux500: add devicetree compat nodes   Linus Walleij
• [GIT PULL] picoxcell fixes for 3.2-rc   Jamie Iles
• [03: PATCH 0/5] The remaining stuff   Russell King - ARM Linux
• [PATCH 0/5] Versatile Express DT support, take 2   Pawel Moll
• [PATCH 1/5] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [PATCH 2/5] ARM: vexpress: Remove platform SMP functions from ct_desc   Pawel Moll
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [PATCH 4/5] ARM: vexpress: Initial RS1 memory map support   Pawel Moll
• [PATCH 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Pawel Moll
• [GIT PULL] arm/mx35/3ds: GPIO : add mc9s08dz60 gpio function   Linus Walleij
• [PATCH] merge i.MX5 into mach-imx   Olof Johansson
• [GIT PULL] i.MX fixes   Olof Johansson
• [GIT PULL] picoxcell fixes for 3.2-rc   Olof Johansson
• [GIT PULL] arm-soc fixes for 3.2-rc   Olof Johansson
• [PATCH 39/41] ARM: restart: lpc32xx & u300: remove unnecessary printk   Linus Walleij
• [PATCH 39/41] ARM: restart: lpc32xx & u300: remove unnecessary printk   Russell King - ARM Linux
• [PATCH 1/7] ARM: restart: add restart hook to machine_desc record   Linus Walleij
• [PATCH v3] ARM: support XZ compressed kernels   Nicolas Pitre
• [PATCH] ARM: OMAP: Fix reprogramming of dpll1 rate   Tony Lindgren
• [PATCH 39/41] ARM: restart: lpc32xx & u300: remove unnecessary printk   Linus Walleij
• [RFC 6/8] of: add clock providers   Cousson, Benoit
• [RFC 6/8] of: add clock providers   Cousson, Benoit
• [PATCH v2] ARM: mx28evk: Simplify GPIO requests for mx28evk_fec_reset   Fabio Estevam
• [PATCH v4 00/10] Add support for tegra30 and cardhu   Stephen Warren
• [PATCH v4 04/10] arm/tegra: prepare early init for multiple tegra variants   Stephen Warren
• [PATCH v4 04/10] arm/tegra: prepare early init for multiple tegra variants   Stephen Warren
• [PATCH v4 06/10] arm/tegra: prepare pinmux code for multiple tegra variants   Stephen Warren
• [PATCH v4 09/10] arm/tegra: implement support for tegra30   Stephen Warren
• [PATCH 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Rob Herring
• [PATCH 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Pawel Moll
• [PATCH 1/2] ARM: mach-imx: convert logical CPU numbers to physical numbers   Shawn Guo
• [PATCH 1/1] ASoC: mxs-saif: remove function in platform_data   Shawn Guo
• [PATCH] ARM: OMAP: Fix reprogramming of dpll1 rate   Aaro Koskinen
• [PATCH 1/4] arm/imx: fix mx3_defconfig to add FEC back   Shawn Guo
• [PATCH 1/2] atmel_lcdfb: Adjust HFP calculation so it matches the manual.   Florian Tobias Schandinat
• [PATCHv2] atmel_lcdfb: support new-style palette format   Florian Tobias Schandinat
• [PATCH 1/1] net: fec: convert to clk_prepare/clk_unprepare   David Miller
• [PATCH 0/2] irq/of: Enchance irq_domain support.   ddaney.cavm at gmail.com
• [PATCH 1/2] irq/of/ARM: Enhance irq iteration capability of irq_domain code.   ddaney.cavm at gmail.com
• [PATCH 2/2] MIPS: Octeon: Add irq_create_of_mapping() and GPIO interrupts.   ddaney.cavm at gmail.com
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   Stepan Moskovchenko
• [PATCH v4 01/10] arm/tegra: initial device tree for tegra30   Rob Herring
• [PATCH 0/2] irq/of: Enchance irq_domain support.   Rob Herring
• [PATCH] ARM: SAMSUNG: Save/restore GPIO drive strength across suspend/resume   Inderpal Singh
• [PATCH 1/3] ARM: EXYNOS4: Add ASV feature for Exynos4 series   Sylwester Nawrocki
• [PATCH v3] ARM: support XZ compressed kernels   Linus Walleij
• [PATCH] ARM: SAMSUNG: Save/restore GPIO drive strength across suspend/resume   Linus Walleij
• [PATCH v5 3/8] ARM: idmap: populate identity map pgd at init time   Russell King - ARM Linux
• DEBUG_LL on OMAP1 (was Re: [PATCH] ARM: OMAP: Fix map_io for Amstrad E3)   Aaro Koskinen
• [PATCH 1/1] net: fec: convert to clk_prepare/clk_unprepare   Uwe Kleine-König
• [PATCH RESEND] davinci: dm646x: move vpif related code to driver core header from platform   Manjunath Hadli
• [PATCH] at91: at91-ohci: fix set/get power   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: Add lsxhl machine type to mach-types   Michael Walle
• [PATCH] ARM: NUC900: Add PCI driver support for NUC960   Wan ZongShun
• [PATCH v2] ARM: gic: allow GIC to support non-banked setups   Marc Zyngier
• [PATCH 1/1] arch/arm/mm/fault.c: Porting OOM changes into __do_page_fault   Kautuk Consul
• [PATCH 0/5] Move mbus setup code out of drivers and into platform   Andrew Lunn
• [PATCH 1/5] [orion] Consolidate the address map setup on Orion based platforms.   Andrew Lunn
• [PATCH 2/5] [orion] Move the *_mbus_dram_info structure into the orion platform and call it orion_mbus_dram_info everywhere.   Andrew Lunn
• [PATCH 3/5] [orion] Move address map setup out of the drivers and into platform.   Andrew Lunn
• [PATCH 4/5] [orion] Remove address map info from all platform data strucutures.   Andrew Lunn
• [PATCH 5/5] [orion] Consolidate the address map setup code.   Andrew Lunn
• [PATCH 1/1] arch/arm/mm/fault.c: Porting OOM changes into __do_page_fault   kautuk.c at samsung.com
• [PATCH] ARM: Add lsxhl machine type to mach-types   Russell King - ARM Linux
• [PATCH 1/1] arch/arm/mm/fault.c: Porting OOM changes into __do_page_fault   Kautuk Consul
• [PATCH 1/1] arch/arm/mm/fault.c: Porting OOM changes into __do_page_fault   kautuk.c at samsung.com
• [PATCH 1/1] arch/arm/mm/fault.c: Porting OOM changes into __do_page_fault   Kautuk Consul
• [PATCH] ARM: NUC900: Add PCI driver support for NUC960   Russell King - ARM Linux
• [PATCH 1/1] arch/arm/mm/fault.c: Porting OOM changes into __do_page_fault   Russell King - ARM Linux
• [PATCH] ARM: Add lsxhl machine type to mach-types   Michael Walle
• [PATCH] ARM: Add lsxhl machine type to mach-types   Russell King - ARM Linux
• [PATCH 1/1] arch/arm/mm/fault.c: Porting OOM changes into __do_page_fault   kautuk.c at samsung.com
• [PATCH] ARM: Add lsxhl machine type to mach-types   Marek Vasut
• [PATCH 1/1] arch/arm/mm/fault.c: Porting OOM changes into __do_page_fault   kautuk.c at samsung.com
• [PATCH 1/1 v2] arch/arm/mm/fault.c: Porting OOM changes into __do_page_fault   Kautuk Consul
• [PATCH 1/1 v2] arch/arm/mm/fault.c: Porting OOM changes into __do_page_fault   kautuk.c at samsung.com
• [PATCH 1/1 v3] arch/arm/mm/fault.c: Porting OOM changes into __do_page_fault   Kautuk Consul
• [PATCH v4 2/7] iommu/core: split mapping to page sizes as supported by the hardware   KyongHo Cho
• [PATCH 1/1] net: fec: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 1/1] net: fec: convert to clk_prepare/clk_unprepare   Richard Zhao
• [PATCH] ARM: Add lsxhl machine type to mach-types   Russell King - ARM Linux
• [PATCH 1/1 v3] arch/arm/mm/fault.c: Porting OOM changes into __do_page_fault   Russell King - ARM Linux
• [PATCH 1/1 v3] arch/arm/mm/fault.c: Porting OOM changes into __do_page_fault   kautuk.c at samsung.com
• [PATCH 1/1 v4] arm: fault.c: Port OOM changes into do_page_fault   Kautuk Consul
• [PATCH v3] ARM: support XZ compressed kernels   Imre Kaloz
• [QUESTION] omap iommu: a generic IOMMU?   Ming Lei
• [PATCH v5 3/8] ARM: idmap: populate identity map pgd at init time   Will Deacon
• [QUESTION] omap iommu: a generic IOMMU?   Ohad Ben-Cohen
• [QUESTION] omap iommu: a generic IOMMU?   Ming Lei
• [QUESTION] omap iommu: a generic IOMMU?   Ohad Ben-Cohen
• [PATCH] ARM: Add lsxhl machine type to mach-types   Marek Vasut
• [PATCH 0/12] ARM: at91: make aic/ccfg/dbgu/dma/ecc/gpio/pit/rtt/smc/watchdog register base soc.h independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/12] ARM: at91: make gpio register base soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/12] ARM: at91: make ecc register base soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/12] ARM: at91: make dma register base soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/12] ARM: at91: make rtt register base soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/12] ARM: at91: add ioremap_registers entry point to soc setup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/12] ARM: at91: make pit register base soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/12] ARM: at91: make smc register base soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/12] ARM: at91: make CCFG soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/12] ARM: at91: make shutdown controler soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/12] ARM: at91: make watchdog drivers soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/12] ARM: at91: make DBGU soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/12] ARM: at91: make aic soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/5] [orion] Move address map setup out of the drivers and into platform.   Michael Walle
• [PATCH] ARM: Add lsxhl machine type to mach-types   Russell King - ARM Linux
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Wolfram Sang
• [PATCH] mfd: add #ifdef CONFIG_DEBUG_FS guard for ab8500_debug_resources   Samuel Ortiz
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Darron Black
• [PATCH] merge i.MX5 into mach-imx   Shawn Guo
• [PATCH 3/3] ARM i.MX: Update defconfig   Shawn Guo
• [RFC 6/8] of: add clock providers   Richard Zhao
• [RFC 3/8] of: create of_phandle_args to simplify return of phandle parsing data   Shawn Guo
• [PATCH] ARM: pxa168/gplugd: add the correct SSP device   Eric Miao
• [PATCH] ARM: pxa168/gplugd: add the correct SSP device   Tanmay Upadhyay
• [PATCH] ARM: pxa168/gplugd: add the correct SSP device   Eric Miao
• [PATCH] ARM: pxa168/gplugd: add the correct SSP device   Tanmay Upadhyay
• [PATCH] ARM: pxa168/gplugd: add the correct SSP device   Eric Miao
• mfd 88pm860x bugfix and regmap   Jett.Zhou
• [PATCH 1/2] ARM: mxs/tx28: add __initconst for fec pdata   Lothar Waßmann
• [V3 1/2] mfd: fix 88pm860x test bank i2c interface bug   Jett.Zhou
• [PATCH v7 01/11] ARM: mmp: fix build error on gpio   Eric Miao
• [V3 1/2] mfd: fix 88pm860x test bank i2c interface bug   Jett.Zhou
• [V3 1/2] mfd: fix 88pm860x test bank i2c interface bug   Jett.Zhou
• [V3 2/2] mfd: Convert 88pm860x to use regmap api   Jett.Zhou
• [PATCH] dts: tegra-ventana: use proper root instead of /dev/ram   Varun Wadekar
• [PATCH V2] ARM: NUC900: Add PCI driver support for NUC960   Wan ZongShun
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Claudio Scordino
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH] ARM: ux500: update the MOP500 GPIO assignments   Linus Walleij
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCHv5] AT91: Add a driver for the ADC   Maxime Ripard
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH v7 04/11] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Russell King - ARM Linux
• [PATCH v7 04/11] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Haojian Zhuang
• [PATCH v7 04/11] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Russell King - ARM Linux
• [PATCH v7 00/11] change pxa gpio to platform driver   Russell King - ARM Linux
• [PATCH v7 04/11] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Haojian Zhuang
• [PATCH v7 04/11] ARM: pxa: rename gpio_to_irq and irq_to_gpio   Russell King - ARM Linux
• [PATCH v2] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [PATCH] at91: at91-ohci: fix set/get power   Nicolas Ferre
• [PATCH] ARM: mmci: add capabilities2 for MMC_CAP2   Per Forlin
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Nicolas Ferre
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Nicolas Ferre
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Nicolas Ferre
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Nicolas Ferre
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Marek Vasut
• [PATCH V2] ARM: NUC900: Add PCI driver support for NUC960   Marek Vasut
• [REPOST PATCH 1/2 v4] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Shubhrajyoti
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Alan Cox
• [PATCH v2] ARM: ux500: update the MOP500 GPIO assignments   Linus Walleij
• [PATCH] RS485: fix inconsistencies in the meaning of some variables   Nicolas Ferre
• [PATCH 10/12] ARM: at91: make watchdog drivers soc independent   Wim Van Sebroeck
• [REPOST PATCH 1/2 v4] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Shubhrajyoti
• [PATCH v2] ARM: gic: fix irq_alloc_descs handling for sparse irq   Magnus Damm
• [PATCH] ARM: SAMSUNG: Save/restore GPIO drive strength across suspend/resume   Thomas Abraham
• [PATCH v2] ARM: gic: fix irq_alloc_descs handling for sparse irq   Rob Herring
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 02/12] ARM: at91: make ecc register base soc independent   Nicolas Ferre
• [PATCH 03/12] ARM: at91: make dma register base soc independent   Nicolas Ferre
• [PATCH 04/12] ARM: at91: make rtt register base soc independent   Nicolas Ferre
• [PATCH 05/12] ARM: at91: add ioremap_registers entry point to soc setup   Nicolas Ferre
• [PATCH 06/12] ARM: at91: make pit register base soc independent   Nicolas Ferre
• [PATCH 07/12] ARM: at91: make smc register base soc independent   Nicolas Ferre
• [PATCH 08/12] ARM: at91: make CCFG soc independent   Nicolas Ferre
• [PATCH v2 0/5] davinci: re-arrange definitions to have a common davinci header   Manjunath Hadli
• [PATCH v2 1/5] davinci: dm644x: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v2 2/5] davinci: dm365: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v2 3/5] davinci: dm646x: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v2 4/5] davinci: create new common platform header for davinci   Manjunath Hadli
• [PATCH v2 5/5] davinci: delete individual platform header files and use a common header   Manjunath Hadli
• [PATCH 09/12] ARM: at91: make shutdown controler soc independent   Nicolas Ferre
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH 10/12] ARM: at91: make watchdog drivers soc independent   Nicolas Ferre
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Nicolas Ferre
• [PATCH v4 01/10] arm/tegra: initial device tree for tegra30   Peter De Schrijver
• [PATCH 11/12] ARM: at91: make DBGU soc independent   Nicolas Ferre
• [PATCH v4 01/10] arm/tegra: initial device tree for tegra30   Rob Herring
• [PATCH 3/3] ARM i.MX: Update defconfig   Sascha Hauer
• [PATCH 1/1] ASoC: mxs-saif: remove function in platform_data   Sascha Hauer
• [PATCH v4 01/10] arm/tegra: initial device tree for tegra30   Peter De Schrijver
• [PATCH] ARM: perf: re-export release_pmu symbol to modules   Will Deacon
• [PATCH v4 01/10] arm/tegra: initial device tree for tegra30   Stephen Warren
• [PATCH v9 00/15] ARM: Add support for the Large Physical Address Extensions   Catalin Marinas
• [PATCH v9 01/15] ARM: pgtable: Fix compiler warning in ioremap.c introduced by nopud   Catalin Marinas
• [PATCH v9 02/15] ARM: pgtable: switch to use pgtable-nopud.h   Catalin Marinas
• [PATCH v9 03/15] ARM: LPAE: Move page table maintenance macros to pgtable-2level.h   Catalin Marinas
• [PATCH v9 04/15] ARM: LPAE: Move the FSR definitions to separate files   Catalin Marinas
• [PATCH v9 05/15] ARM: LPAE: Factor out classic-MMU specific code into proc-v7-2level.S   Catalin Marinas
• [PATCH v9 06/15] ARM: LPAE: add ISBs around MMU enabling code   Catalin Marinas
• [PATCH v9 07/15] ARM: LPAE: Introduce the 3-level page table format definitions   Catalin Marinas
• [PATCH v9 08/15] ARM: LPAE: Page table maintenance for the 3-level format   Catalin Marinas
• [PATCH v9 09/15] ARM: LPAE: MMU setup for the 3-level page table format   Catalin Marinas
• [PATCH v9 10/15] ARM: LPAE: Invalidate the TLB before freeing the PMD   Catalin Marinas
• [PATCH v9 11/15] ARM: LPAE: Add fault handling support   Catalin Marinas
• [PATCH v9 12/15] ARM: LPAE: Add context switching support   Catalin Marinas
• [PATCH v9 13/15] ARM: LPAE: Add identity mapping support for the 3-level page table format   Catalin Marinas
• [PATCH v9 14/15] ARM: LPAE: mark memory banks with start > ULONG_MAX as highmem   Catalin Marinas
• [PATCH v9 15/15] ARM: LPAE: Add the Kconfig entries   Catalin Marinas
• [PATCH] mmc: mmci: Fix PIO read for small SDIO packets   Stefan Nilsson XK
• [PATCH v2] ARM: mach-imx: convert logical CPU numbers to physical numbers   Will Deacon
• [PATCH v4 01/10] arm/tegra: initial device tree for tegra30   Rob Herring
• [PATCH] dts: tegra-ventana: use proper root instead of /dev/ram   Stephen Warren
• [PATCH v6] AT91: Add a driver for the ADC   Maxime Ripard
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH 1/2] ARM: use cache type functions for arch_get_unmapped_area   Nicolas Pitre
• [PATCH 2/2] ARM: topdown mmap support   Nicolas Pitre
• [PATCH] ARM: OMAP: Fix reprogramming of dpll1 rate   Tony Lindgren
• [PATCH 0/2] irq/of: Enchance irq_domain support.   David Daney
• [PATCH 2/2] ARM: topdown mmap support   Rob Herring
• [PATCH 2/2] ARM: topdown mmap support   Nicolas Pitre
• [PATCH] at91: at91-ohci: fix set/get power   Thomas Petazzoni
• DEBUG_LL on OMAP1 (was Re: [PATCH] ARM: OMAP: Fix map_io for Amstrad E3)   Tony Lindgren
• [PATCH] ARM: restart: davinci: use new restart hook   Sekhar Nori
• [PATCH] ARM: SAMSUNG: Save/restore GPIO drive strength across suspend/resume   Stephen Warren
• [03: PATCH 0/5] The remaining stuff   Nori, Sekhar
• [PATCH v2 2/2] USB: ehci-tegra: add probing through device tree   Greg KH
• [PATCH] ARM: SAMSUNG: Save/restore GPIO drive strength across suspend/resume   Thomas Abraham
• [PATCH v8 11/20] OMAP2+: UART: Move errata handling from serial.c to omap-serial   Jon Hunter
• [PATCH] ARM: drop support for the ARM1020E processor   Paul Bolle
• [PATCH v4 1/4] ARM: davinci: psc: fix incorrect mask   Sekhar Nori
• [PATCH v4 2/4] ARM: davinci: psc: fix incorrect offsets   Sekhar Nori
• [PATCH 3/4] ARM: davinci: dm646x does not have a DSP domain   Sekhar Nori
• [PATCH v4 4/4] ARM: davinci: add support for multiple power domains   Sekhar Nori
• [PATCH 10/12] ARM: at91: make watchdog drivers soc independent   Andrew Victor
• [PATCH 1/2] ARM: use cache type functions for arch_get_unmapped_area   Will Deacon
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Jonathan Cameron
• [PATCH 1/2] ARM: use cache type functions for arch_get_unmapped_area   Rob Herring
• [PATCH] at91: at91-ohci: fix set/get power   Andrew Victor
• [GIT PULL] ARM: OMAP: DSS hwmod/reset fixes for 3.2   Tony Lindgren
• [PATCH] at91: at91-ohci: fix set/get power   Thomas Petazzoni
• [RFC 3/5] ARM: OMAP: iommu: declare a private iommu binding struct   Tony Lindgren
• [RFC 4/5] ARM: OMAP3: bind omap3isp_device to its iommu device   Tony Lindgren
• [RFC 5/5] iommu/omap: eliminate the public omap_find_iommu_device() method   Tony Lindgren
• [PATCH 1/1] ASoC: mxs-saif: remove function in platform_data   Mark Brown
• [PATCH 2/4] mmc: omap: adapt the hsmmc driver to device tree   Tony Lindgren
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Jonathan Cameron
• [GIT PULL] ARM: OMAP: DSS hwmod/reset fixes for 3.2   Paul Walmsley
• [PATCH v2] spi: QUP based bus driver for Qualcomm MSM chipsets   Harini Jayaraman
• [GIT PULL] ARM: OMAP: DSS hwmod/reset fixes for 3.2   Tony Lindgren
• [PATCH 0/2] irq/of: Enchance irq_domain support.   Rob Herring
• [PATCH 3/5] [orion] Move address map setup out of the drivers and into platform.   Nicolas Pitre
• [PATCH 0/2] irq/of: Enchance irq_domain support.   David Daney
• [PATCH] at91: at91-ohci: fix set/get power   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/41] ARM: restart: at91: use new restart hook   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: exynos: remove exynos4_scu_enable()   Shawn Guo
• [PATCH] ARM: exynos: remove exynos4_scu_enable()   Kyungmin Park
• [PATCH 1/6] ARM: fix be8 support for phys/virt address conversion   Junxiao Bi
• [PATCH 2/6] ARM: gic: fix big endian support   Junxiao Bi
• [PATCH 3/6] ARM: early_printk: pl01x: fix big endian support   Junxiao Bi
• [PATCH 4/6] ARM: add big endian support for peripheral access   Junxiao Bi
• [PATCH 5/6] ARM: Atomic64: fix 64bit ops in BE mode   Junxiao Bi
• [PATCH 6/6] ARM: support kernel modules in BE8 mode   Junxiao Bi
• [PATCH v2] ARM: mach-imx: convert logical CPU numbers to physical numbers   Shawn Guo
• [PATCH] ARM: mmp: encode device id into {pxa168, pxa910, mmp2}_add_*()   Eric Miao
• [PATCH 2/4] mmc: omap: adapt the hsmmc driver to device tree   Rajendra Nayak
• [PATCH v6 0/2] iommu/exynos: Add IOMMU and Enhance System MMU driver for Samsung Exynos   KyongHo Cho
• [PATCH v6 1/2] ARM: EXYNOS: Change System MMU platform device definitions   KyongHo Cho
• [PATCH v6 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH v6 1/2] ARM: EXYNOS: Change System MMU platform device definitions   Kyungmin Park
• [PATCH v6 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   Kyungmin Park
• [PATCH v6 1/2] ARM: EXYNOS: Change System MMU platform device definitions   KyongHo Cho
• [PATCH v1] dts: tegra-ventana: use proper root instead of /dev/ram   Varun Wadekar
• [PATCH] OMAP2+: UART: Make the SERIAL_OMAP depend on ARCH_OMAP2PLUS   Shubhrajyoti D
• [PATCH 1/3] ARM: SAMSUNG: Add USB OHCI device   Jingoo Han
• [PATCH 2/3] ARM: EXYNOS: Add USB OHCI support to SMDKV310 board   Jingoo Han
• [PATCH 3/3] USB: Add S5P OHCI diver   Jingoo Han
• [PATCH V4 00/14] add clk_prepare/clk_unprepare to imx drivers   Richard Zhao
• [PATCH V4 01/14] clk: add helper functions clk_prepare_enable and clk_disable_unprepare   Richard Zhao
• [PATCH V4 02/14] ARM: mxc: time: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V4 03/14] ARM: mxc: ahci: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V4 04/14] ARM: mxc: pwm: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V4 05/14] ARM: mxc: epit: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V4 06/14] ARM: mxc: arch_reset: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V4 07/14] ARM: mxc: audmux-v2: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V4 08/14] ARM: pm-imx5: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V4 09/14] ARM: mx31moboard: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V4 10/14] ARM: mxs: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V4 11/14] serial: imx: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V4 12/14] net: fec: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V4 13/14] i2c: imx: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH V4 14/14] mmc: sdhci-esdhc-imx: add clk_prepare/clk_unprepare   Richard Zhao
• [PATCH 0/3] Support Samsung S5P OHCI device and driver   Jingoo Han
• [GIT PULL] ARM: OMAP: DSS hwmod/reset fixes for 3.2   Tomi Valkeinen
• [PATCH 1/6] ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung   Kukjin Kim
• [PATCH 6/6] ARM: S3C64XX: Modified according to SPI consolidation work.   Kukjin Kim
• [RFC][PATCH] Consolidate Samsung MAINTAINERS   Kukjin Kim
• [PATCH] ARM: SAMSUNG: gpio-cfg.h: include linux/types.h   Kukjin Kim
• [PATCH] ARM: exynos: remove exynos4_scu_enable()   Kukjin Kim
• [PATCH 1/2] MAINTAINERS: Add linux-samsung-soc mailing list for Samsung   Kukjin Kim
• [PATCH v6 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH 3/5] [orion] Move address map setup out of the drivers and into platform.   Andrew Lunn
• [PATCH 3/5] ARM: restart: exynos4: use new restart hook XXX WIP XXX WHY IS THERE NO LOCAL HEADERS IN arch/arm/mach-exynos4 XXX   Kukjin Kim
• [PATCH v6 1/2] ARM: EXYNOS: Change System MMU platform device definitions   KyongHo Cho
• [PATCH 1/4] ARM: PL330: Don't call the callbacks if there isn't any active transfer   Jassi Brar
• [GIT PULL] ARM: pxa: change gpio to platform driver   Haojian Zhuang
• [PATCH/RESEND #3 0/7] SmartReflex Patches   Felipe Balbi
• [PATCH/RESEND #3 1/7] OMAP3+: PM: SR: add suspend/resume handlers   Felipe Balbi
• [PATCH/RESEND #3 2/7] arm: omap: smartreflex: add missing platform_set_drvdata()   Felipe Balbi
• [PATCH/RESEND #3 3/7] arm: omap: smartreflex: use dev_get_drvdata()   Felipe Balbi
• [PATCH/RESEND #3 4/7] arm: omap: smartreflex: move late_initcall() closer to its argument   Felipe Balbi
• [PATCH/RESEND #3 5/7] arm: omap: smartreflex: clean ups all over   Felipe Balbi
• [PATCH/RESEND #3 6/7] arm: omap: smartreflex: fix IRQ handling bug   Felipe Balbi
• [PATCH/RESEND #3 7/7] arm: omap: smartreflex: micro-optimization for sanity check   Felipe Balbi
• [PATCH 2/4] ARM: PL330: Only register usable channels   Jassi Brar
• [PATCH 04/41] ARM: restart: at91: use new restart hook   Russell King - ARM Linux
• [PATCH] OMAP2+: UART: Make the SERIAL_OMAP depend on ARCH_OMAP2PLUS   Russell King - ARM Linux
• [PATCH 3/4] ARM: PL330: Fix the size of the dst_cache_ctrl field   Jassi Brar
• [PATCH 4/4] ARM: PL330: Fix typo in _prepare_ccr()   Jassi Brar
• [PATCH 2/2] MAINTAINERS: Extend Samsung patterns to cover SPI and ASoC drivers   Kukjin Kim
• [PATCH 04/41] ARM: restart: at91: use new restart hook   Jean-Christophe PLAGNIOL-VILLARD
• [linux-pm] [PATCH 1/3 v3] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210/4212   Kukjin Kim
• [linux-pm] [PATCH 1/3 v3] ARM: EXYNOS4: Support for generic I/O power domains on EXYNOS4210/4212   Kyungmin Park
• [PATCH] OMAP2+: UART: Make the SERIAL_OMAP depend on ARCH_OMAP2PLUS   Shubhrajyoti
• [PATCH 1/2] ARM: SAMSUNG: Add pm_caps into platform data   Kukjin Kim
• [PATCH] merge i.MX5 into mach-imx   Dirk Behme
• [PATCH v2 4/5] davinci: create new common platform header for davinci   Sergei Shtylyov
• [PATCH] ARM: EXYNOS: Fixed undefined symbol compilation error.   Pankaj Dubey
• [RESEND][PATCH] ARM: EXYNOS: Fixed undefined symbol compilation error.   Pankaj Dubey
• [PATCH] ARM: u300: localize GPIO assignments   Linus Walleij
• [PATCH] Add dm9000 network support for OK6410 board.   Kukjin Kim
• [PATCH] MTD: nand: Making MTD_NAND_OMAP2 depend on ARCH_OMAP2PLUS   Shubhrajyoti D
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [RFC 0/5] OMAP groundwork for IOMMU-based DMA API   Roedel, Joerg
• [PATCH v2 1/5] davinci: dm644x: remove the macros from the header to move to c file   Sergei Shtylyov
• [RFC 0/5] OMAP groundwork for IOMMU-based DMA API   Ohad Ben-Cohen
• [V3 2/2] mfd: Convert 88pm860x to use regmap api   Haojian Zhuang
• [PATCH v7] AT91: Add a driver for the ADC   Maxime Ripard
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH v2 5/5] davinci: delete individual platform header files and use a common header   Sergei Shtylyov
• [RFC 0/5] OMAP groundwork for IOMMU-based DMA API   Roedel, Joerg
• [V3 2/2] mfd: Convert 88pm860x to use regmap api   Mark Brown
• [PATCH 2/2] MAINTAINERS: Extend Samsung patterns to cover SPI and ASoC drivers   Mark Brown
• [RFC 0/5] OMAP groundwork for IOMMU-based DMA API   Ohad Ben-Cohen
• [PATCH] ARM: mmp: encode device id into {pxa168, pxa910, mmp2}_add_*()   Haojian Zhuang
• [PATCH v3] ARM: gic: allow GIC to support non-banked setups   Marc Zyngier
• [PATCH v4 2/4] ARM: davinci: psc: fix incorrect offsets   Sergei Shtylyov
• [PATCH] ARM: NUC900: add clock source select for ac97 and i2s   Wan ZongShun
• [PATCH] ARM: NUC900: add and change some device clk definitions.   Wan ZongShun
• [RFC][PATCH] gpiolib: add irq_wake (power-management) sysfs file   Mark Brown
• [PATCH v3] ARM: gic: allow GIC to support non-banked setups   Rob Herring
• [PATCH v2 4/5] davinci: create new common platform header for davinci   Hadli, Manjunath
• [PATCH] ARM: pxa: add support for Raumfeld DDX   Mark Brown
• [PATCH v3] ARM: gic: allow GIC to support non-banked setups   Marc Zyngier
• [PATCH v2 5/5] davinci: delete individual platform header files and use a common header   Hadli, Manjunath
• [PATCH v2 1/5] davinci: dm644x: remove the macros from the header to move to c file   Hadli, Manjunath
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   Rafal Prylowski
• [PATCH v4-rebased 0/7] iommu: split mapping to page sizes as supported by the hardware   Joerg Roedel
• [PATCH 1/4] ARM: PL330: Don't call the callbacks if there isn't any active transfer   Javi Merino
• [PATCH v5] Consolidate SRAM support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: restart: davinci: use new restart hook   Russell King - ARM Linux
• [PATCH 1/4] ARM: PL330: Don't call the callbacks if there isn't any active transfer   Jassi Brar
• [RFC][PATCH] gpiolib: add irq_wake (power-management) sysfs file   Russell King - ARM Linux
• [PATCH V2] ARM: NUC900: Add PCI driver support for NUC960   Russell King - ARM Linux
• [PATCH v3] ARM: gic: allow GIC to support non-banked setups   Rob Herring
• [PATCH] MTD: nand: Making MTD_NAND_OMAP2 depend on ARCH_OMAP2PLUS   Russell King - ARM Linux
• [PATCH v16 09/12] OMAP: dmtimer: low-power mode support   Omar Ramirez Luna
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   H Hartley Sweeten
• [PATCH v3] ARM: gic: allow GIC to support non-banked setups   Marc Zyngier
• [PATCH] ARM: SAMSUNG: Save/restore GPIO drive strength across suspend/resume   Stephen Warren
• [PATCH v1] dts: tegra-ventana: use proper root instead of /dev/ram   Stephen Warren
• [PATCH 1/2] ARM: at91: switch gpio clock to clkdev   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ARM: at91: gpio make struct at91_gpio_bank an initdata   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 01/13 v2] ARM: at91: make gpio register base soc independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: at91: switch gpio clock to clkdev   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/2] ARM: at91: gpio make struct at91_gpio_bank an initdata   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 02/13 v2] ARM: at91: make ecc register base soc independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 03/13 v2] ARM: at91: make dma register base soc independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 04/13 v2] ARM: at91: make rtt register base soc independant   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 05/13 v2] ARM: at91: add ioremap_registers entry point to soc setup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 06/13 v2] ARM: at91: make pit register base soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 07/13 v2] ARM: at91: make smc register base soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 08/13 v2] ARM: at91: drop CCFG   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 09/13 v2] ARM: at91: make shutdown controler soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 10/13 v2] ARM: at91: make watchdog drivers soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 11/13 v2] ARM: at91: make DBGU soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 12/13] ARM: at91: make aic soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 13/13] ARM: at91: make rm9200 rtc drivers soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V2] ARM: NUC900: Add PCI driver support for NUC960   Arnd Bergmann
• [PATCH] ARM: NUC900: add and change some device clk definitions.   Arnd Bergmann
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Stepan Moskovchenko
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Thomas Gleixner
• [PATCH 3/5] [orion] Move address map setup out of the drivers and into platform.   Nicolas Pitre
• [patch 1/2] arch/arm/mach-ux500/mbox-db5500.c: world-writable sysfs fifo file   akpm at linux-foundation.org
• [patch 2/2] arm, exec: remove redundant set_fs(USER_DS)   akpm at linux-foundation.org
• [PATCH 2/2] ARM: topdown mmap support   Rob Herring
• [patch] ARM: smpboot: Enable interrupts after marking CPU online/active   Dima Zavin
• [PATCH 0/4] mmc: logging neatening and mmc_host_<level>   Joe Perches
• [PATCH 1/4] mmc: Update logging style   Joe Perches
• [PATCH 3/4] mmc: Logging neatening   Joe Perches
• [PATCH 4/4] mmc: Add mmc_host_<level> logging   Joe Perches
• [PATCH 1/2] ARM: use cache type functions for arch_get_unmapped_area   Rob Herring
• [PATCH/RESEND #3 5/7] arm: omap: smartreflex: clean ups all over   Valdis.Kletnieks at vt.edu
• [PATCH v2] video: support MIPI-DSI controller driver   Kyungmin Park
• [PATCH 4/4] mmc: Add mmc_host_<level> logging   Joe Perches
• [PATCH 4/4] mmc: Add mmc_host_<level> logging   NamJae Jeon
• [PATCH 4/4] mmc: Add mmc_host_<level> logging   Joe Perches
• [PATCH 1/4] mmc: Update logging style   NamJae Jeon
• [PATCH 3/4] mmc: Logging neatening   Joe Perches
• [PATCH 3/4] mmc: Logging neatening   NamJae Jeon
• [PATCH 3/4] mmc: Logging neatening   Joe Perches
• [PATCH 3/4] mmc: Logging neatening   NamJae Jeon
• [PATCH] Add dm9000 network support for OK6410 board.   Peiyong Feng
• [PATCH] Add dm9000 network support for OK6410 board.   Thomas Abraham
• [PATCH 1/1] gpio: gpio-mxs: remove the duplicated micro define   Dong Aisheng-B29396
• [PATCH] arm: device.h: Add dma_mask to pdev_archdata structure   Fabio Estevam
• [PATCH 4/4] mmc: Add mmc_host_<level> logging   David Brown
• [PATCH] MTD: nand: Making MTD_NAND_OMAP2 depend on ARCH_OMAP2PLUS   Shubhrajyoti D
• [PATCH] MTD: nand: Making MTD_NAND_OMAP2 depend on ARCH_OMAP2PLUS   Shubhrajyoti
• [PATCH 4/4] mmc: Add mmc_host_<level> logging   NamJae Jeon
• Crash when memset of shared mapped memory in ARM   naveen yadav
• [PATCH 0/23] mach/vmalloc.h removal, and ioremap optimization   Nicolas Pitre
• [PATCH 01/23] ARM: mach-dove: remove inclusion of <mach/vmalloc.h>   Nicolas Pitre
• [PATCH 02/23] ARM: mach-prima2: don't define SIRFSOC_VA in terms of VMALLOC_END   Nicolas Pitre
• [PATCH 03/23] ARM: plat-mxc: remove inclusion of <mach/vmalloc.h>   Nicolas Pitre
• [PATCH 04/23] ARM: mach-at91: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 05/23] ARM: mach-davinci: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 06/23] ARM: mach-tegra: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 07/23] ARM: plat-omap: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 08/23] ARM: mach-bcmring: use proper constant to identify DMA memory area   Nicolas Pitre
• [PATCH 09/23] ARM: mach-orion5x: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 10/23] ARM: mach-kirkwood: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 11/23] ARM: mach-ixp23xx: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 12/23] ARM: plat-iop: remove arch specific special handling for ioremap   Nicolas Pitre
• [PATCH 13/23] ARM: versatile: remove overlapping map_desc entry   Nicolas Pitre
• [PATCH 14/23] ARM: realview: fix map_desc alignment   Nicolas Pitre
• [PATCH 15/23] ARM: realview-eb11mp: fix map_desc alignment   Nicolas Pitre
• [PATCH 16/23] ARM: sort the meminfo array earlier   Nicolas Pitre
• [PATCH 17/23] ARM: move initialization of the high_memory variable earlier   Nicolas Pitre
• [PATCH 18/23] mm: add vm_area_add_early()   Nicolas Pitre
• [PATCH 19/23] ARM: move iotable mappings within the vmalloc region   Nicolas Pitre
• [PATCH 20/23] ARM: simplify __iounmap() when dealing with section based mapping   Nicolas Pitre
• [PATCH 21/23] ARM: add generic ioremap optimization by reusing static mappings   Nicolas Pitre
• [PATCH 22/23] ARM: big removal of now unused vmalloc.h files   Nicolas Pitre
• [PATCH 23/23] ARM: move VMALLOC_END down temporarily for shmobile   Nicolas Pitre
• Error for machine_is_m28evk   Shawn Guo
• [PATCH v16 09/12] OMAP: dmtimer: low-power mode support   DebBarma, Tarun Kanti
• [PATCH 1/4] ARM: PL330: Don't call the callbacks if there isn't any active transfer   Jassi Brar
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   Mika Westerberg
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   Mika Westerberg
• [PATCH 3/5] [orion] Move address map setup out of the drivers and into platform.   Andrew Lunn
• [PATCH v2] merge i.MX5 into mach-imx   Sascha Hauer
• [PATCH 1/3] ARM i.MX5: remove unnecessary includes from board files   Sascha Hauer
• [PATCH 2/3] ARM i.MX: Merge i.MX5 support into mach-imx   Sascha Hauer
• [PATCH 3/3] ARM i.MX: Update defconfig   Sascha Hauer
• [GIT PULL] mx5 merge   Sascha Hauer
• Crash when memset of shared mapped memory in ARM   Russell King - ARM Linux
• [PATCH] arm: device.h: Add dma_mask to pdev_archdata structure   Russell King - ARM Linux
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   Rafal Prylowski
• Error for machine_is_m28evk   Russell King - ARM Linux
• Crash when memset of shared mapped memory in ARM   Russell King - ARM Linux
• [PATCH] watchdog: fix initialisation printout in s3c2410_wdt   Dmitry Artamonow
• [PATCH v2] ARM: kirkwood: add LaCie Network Space Lite v2 support   Christophe Vu-Brugier
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   Rafal Prylowski
• Crash when memset of shared mapped memory in ARM   naveen yadav
• [PATCH 1/2] ARM: use cache type functions for arch_get_unmapped_area   Will Deacon
• [PATCH/RESEND #3 5/7] arm: omap: smartreflex: clean ups all over   Felipe Balbi
• [PATCH v8 11/20] OMAP2+: UART: Move errata handling from serial.c to omap-serial   Govindraj
• [PATCH v2] ARM: kirkwood: add LaCie Network Space Lite v2 support   Simon Guinot
• [PATCH] arm: device.h: Add dma_mask to pdev_archdata structure   Uwe Kleine-König
• [PATCH] watchdog: fix initialisation printout in s3c2410_wdt   Thomas Abraham
• [PATCH] ARM: Add TLB flushing for both entries in a PMD   Catalin Marinas
• [PATCH 0/3] make stmp-style devices mach-independent   Wolfram Sang
• [PATCH 1/3] drivers: base: add support for stmp-style devices   Wolfram Sang
• [PATCH 2/3] i2c: mxs: use global reset function   Wolfram Sang
• [PATCH 3/3] rtc: stmp3xxx: use global stmp_device functionality   Wolfram Sang
• [PATCH 0/3] OMAP serial device tree support   Rajendra Nayak
• [PATCH 1/3] ARM: omap_device: handle first time activation of console device   Rajendra Nayak
• [PATCH 2/3] omap-serial: Add minimal device tree support   Rajendra Nayak
• [PATCH 3/3] ARM: omap: pass minimal SoC/board data for UART from dt   Rajendra Nayak
• [GIT PULL] ARM irqchip consolidation   Marc Zyngier
• [PATCH] ARM: restart: davinci: use new restart hook   Nori, Sekhar
• [GIT PULL] Missing CPU mapping updates   Will Deacon
• Crash when memset of shared mapped memory in ARM   Will Deacon
• [PATCH REPOST] genirq: don't allow per cpu interrupts to be suspended   Marc Zyngier
• [PATCH] ARM: pxa: add support for Raumfeld DDX   Daniel Mack
• [PATCH] arm: device.h: Add dma_mask to pdev_archdata structure   Rob Herring
• [PATCH] ARM: pxa: add support for Raumfeld DDX   Mark Brown
• [PATCH] arm: mx28: fix bit operation in clock setting   Wolfram Sang
• [PATCH] arm: mx28: check for gated clocks when setting saif divider   Wolfram Sang
• [PATCH] arm: mx28: check for gated clocks when setting saif divider   Dong Aisheng-B29396
• [PATCH] arm: mx28: check for gated clocks when setting saif divider   Wolfram Sang
• Error for machine_is_m28evk   Shawn Guo
• [PATCH] ARM: pxa: add support for Raumfeld DDX   Daniel Mack
• [PATCH] ARM: pxa: add support for Raumfeld DDX   Mark Brown
• [PATCH] ARM: pxa: add support for Raumfeld DDX   Daniel Mack
• [PATCH] arm: mx28: check for gated clocks when setting saif divider   Dong Aisheng-B29396
• [PATCH REPOST] genirq: don't allow per cpu interrupts to be suspended   Thomas Gleixner
• [RFC][PATCH] gpiolib: add irq_wake (power-management) sysfs file   Patrick Combes
• [PATCH] ARM: pxa: fix missing linux/gpio.h include   Daniel Mack
• [RFC][PATCH] gpiolib: add irq_wake (power-management) sysfs file   Mark Brown
• [RFC][PATCH] gpiolib: add irq_wake (power-management) sysfs file   Patrick Combes
• [PATCH 1/3] ARM: omap_device: handle first time activation of console device   Rob Herring
• [PATCH] ARM: pxa: fix missing linux/gpio.h include   Eric Miao
• [GIT PULL] pxa: fixes for v3.2-rc1   Eric Miao
• [PATCH 2/3] omap-serial: Add minimal device tree support   Rob Herring
• [PATCH 1/3] ARM: omap_device: handle first time activation of console device   Cousson, Benoit
• [PATCH] ARM: pxa: fix missing linux/gpio.h include   Haojian Zhuang
• [PATCH v2] fix compilation breakage in entry-armv.S   Guennadi Liakhovetski
• [alsa-devel] [PATCH] ARM: pxa: add support for Raumfeld DDX   Johannes Stezenbach
• [PATCH] ARM: pxa: fix missing linux/gpio.h include   Eric Miao
• [PATCH 1/3] ARM: omap_device: handle first time activation of console device   Cousson, Benoit
• [GIT PULL] pxa: fixes for v3.2-rc1   Eric Miao
• [PATCH] ARM: pxa: fix missing linux/gpio.h include   Daniel Mack
• [PATCH 0/5] Versatile Express DT support, take 2   Dave Martin
• [PATCH 1/5] ARM: vexpress: Get rid of MMIO_P2V   Dave Martin
• [PATCH 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Dave Martin
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 1/3] ARM: omap_device: handle first time activation of console device   Rob Herring
• [PATCH 4/5] ARM: vexpress: Initial RS1 memory map support   Dave Martin
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Dave Martin
• [PATCH Resend] ARM: OMAP2+: Remove empty io.h   Thomas Weber
• [PATCH] ARM: SCU: use cpu_logical_map for per-CPU low power mode   Will Deacon
• [PATCH] ARM: PMU: remove pmu_init declaration   Will Deacon
• [GIT PULL] ARM: OMAP: hwmod fix for 3.2-rc3   Cousson, Benoit
• [alsa-devel] [PATCH] ARM: pxa: add support for Raumfeld DDX   Mark Brown
• [PATCH 3/5] [orion] Move address map setup out of the drivers and into platform.   Nicolas Pitre
• [PATCH 1/5] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [PATCH 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Pawel Moll
• [PATCH] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   Javier Martin
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Rob Herring
• [PATCH 4/5] ARM: vexpress: Initial RS1 memory map support   Pawel Moll
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [PATCH] ARM: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c   Catalin Marinas
• [PATCH 0/4] Consolidate identity mapping code in idmap.c   Will Deacon
• [PATCH 1/4] ARM: idmap: populate identity map pgd at init time using .init.text   Will Deacon
• [PATCH 2/4] ARM: suspend: use idmap_pgd instead of suspend_pgd   Will Deacon
• [PATCH 3/4] ARM: proc-*.S: place cpu_reset functions into .idmap.text section   Will Deacon
• [PATCH 4/4] ARM: idmap: use idmap_pgd when setting up mm for reboot   Will Deacon
• [PATCH 3/5] [orion] Move address map setup out of the drivers and into platform.   Andrew Lunn
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Rob Herring
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [PATCH 0/23] mach/vmalloc.h removal, and ioremap optimization   Stephen Warren
• [PATCH 3/5] [orion] Move address map setup out of the drivers and into platform.   Michael Walle
• [PATCH] ARM: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c   Nicolas Pitre
• [RFC][PATCH] gpiolib: add irq_wake (power-management) sysfs file   Patrick Combes
• [PATCH 3/5] [orion] Move address map setup out of the drivers and into platform.   Nicolas Pitre
• [PATCH 1/5] ARM: vexpress: Get rid of MMIO_P2V   Dave Martin
• [PATCH 1/5] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Dave Martin
• [PATCH] ARM: kirkwood: reorder machine_desc initializers   Christophe Vu-Brugier
• [PATCH 1/3] drivers: base: add support for stmp-style devices   Arnd Bergmann
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Dave Martin
• [PATCH v6 0/5] kexec fixes and soft restart code   Will Deacon
• [PATCH v6 1/5] ARM: lib: add call_with_stack function for safely changing stack   Will Deacon
• [PATCH v6 2/5] ARM: reset: implement soft_restart for jumping to a physical address   Will Deacon
• [PATCH v6 3/5] ARM: soft_restart: disable the outer L2 when the last CPU is going down   Will Deacon
• [PATCH v6 4/5] ARM: stop: execute platform callback from cpu_stop code   Will Deacon
• [PATCH v6 5/5] ARM: kexec: use soft_restart for branching to the reboot buffer   Will Deacon
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [PATCH 1/3] drivers: base: add support for stmp-style devices   Michał Mirosław
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Dave Martin
• [PATCH 4/5] ARM: vexpress: Initial RS1 memory map support   Dave Martin
• [PATCH 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Dave Martin
• [PATCH 1/3] ARM: omap_device: handle first time activation of console device   Cousson, Benoit
• [PATCH v6 3/5] ARM: soft_restart: disable the outer L2 when the last CPU is going down   Stephen Boyd
• [PATCH v6 3/5] ARM: soft_restart: disable the outer L2 when the last CPU is going down   Will Deacon
• [PATCH 3/4] mmc: Logging neatening   Mike Frysinger
• [RFC 3/8] of: create of_phandle_args to simplify return of phandle parsing data   Grant Likely
• Error for machine_is_m28evk   Uwe Kleine-König
• [RFC 7/8] arm/clkdev: lookup clocks from OF clock providers   Grant Likely
• [PATCHv2] ARM: OMAP: hsmmc: Fix mux for non-OMAP pins   Thomas Weber
• [RFC 6/8] of: add clock providers   Grant Likely
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Dave Martin
• [PATCH 1/3] drivers: base: add support for stmp-style devices   Wolfram Sang
• [PATCH 1/3] drivers: base: add support for stmp-style devices   Wolfram Sang
• [PATCH] ARM: ux500: update defconfig   Linus Walleij
• [PATCH] ARM: u300: update defconfig   Linus Walleij
• [PATCH v8 11/20] OMAP2+: UART: Move errata handling from serial.c to omap-serial   Jon Hunter
• [PATCH] ARM: Do not call flush_cache_user_range with mmap_sem held   Olof Johansson
• [PATCH v6 3/5] ARM: soft_restart: disable the outer L2 when the last CPU is going down   Stephen Boyd
• [RFC 6/8] of: add clock providers   Grant Likely
• Error for machine_is_m28evk   Shawn Guo
• [PATCH 0/23] mach/vmalloc.h removal, and ioremap optimization   Nicolas Pitre
• orion/kirkwood and device tree   Michael Walle
• [PATCH 2/2] ARM: topdown mmap support   Nicolas Pitre
• [PATCH] ARM: Do not call flush_cache_user_range with mmap_sem held   Russell King - ARM Linux
• [PATCH] ARM: OMAP: PM: only register TWL with voltage layer when device is present   Kevin Hilman
• [PATCH] ARM: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c   Russell King - ARM Linux
• s5p tree moved back to kernel.org   Kukjin Kim
• [PATCH/RESEND #3 1/7] OMAP3+: PM: SR: add suspend/resume handlers   Kevin Hilman
• [PATCH/RESEND #3 6/7] arm: omap: smartreflex: fix IRQ handling bug   Kevin Hilman
• [PATCH/RESEND #3 0/7] SmartReflex Patches   Kevin Hilman
• [PATCH Resend] ARM: OMAP2+: Remove empty io.h   Kevin Hilman
• [PATCH] ARM: Use PMD_SHIFT instead of PGDIR_SHIFT in dma-consistent.c   Nicolas Pitre
• [PATCH] ARM: Do not call flush_cache_user_range with mmap_sem held   Olof Johansson
• [PATCH] ARM: Do not call flush_cache_user_range with mmap_sem held   Olof Johansson
• [PATCH] ARM: exynos: remove exynos4_scu_enable()   Kukjin Kim
• [PATCH] ARM: Update mach-types to fix mxs build breakage   Shawn Guo
• [PATCH v16 09/12] OMAP: dmtimer: low-power mode support   Omar Ramirez Luna
• [PATCH 3/3] ARM: omap: pass minimal SoC/board data for UART from dt   Rob Herring
• [PATCH] arm: mx28: fix bit operation in clock setting   Shawn Guo
• [PATCH] arm: mx28: check for gated clocks when setting saif divider   Shawn Guo
• [PATCH V4 00/14] add clk_prepare/clk_unprepare to imx drivers   Richard Zhao
• [PATCH 1/2] ARM: mx51/53: correct misuse of _clk_max_enable and _clk_max_disable   Richard Zhao
• [PATCH 1/6] ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung   padma venkat
• [PATCH 6/6] ARM: S3C64XX: Modified according to SPI consolidation work.   padma venkat
• [PATCH 0/3] make stmp-style devices mach-independent   Shawn Guo
• [RFC 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Richard Zhao
• [RFC 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Eric Miao
• [PATCH] arm: omap2: fix build failure   Ming Lei
• [PATCH -next] arm: omap2: fix compile failure on arch/arm/mach-omap2/cpuidle34xx.c   tom.leiming at gmail.com
• [RFC 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Richard Zhao
• [RFC 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Shawn Guo
• [PATCH v3] ARM: gic: allow GIC to support non-banked setups   Thomas Abraham
• [PATCH 0/3] make stmp-style devices mach-independent   Dong Aisheng-B29396
• [PATCH 1/5] ARM: vexpress: Get rid of MMIO_P2V   Ryan Harkin
• [PATCH/RESEND #3 6/7] arm: omap: smartreflex: fix IRQ handling bug   Felipe Balbi
• [PATCH 1/3] ARM: omap_device: handle first time activation of console device   Rajendra Nayak
• [PATCH 1/3] ARM: omap_device: handle first time activation of console device   Rajendra Nayak
• [PATCH] ARM: mmci: add capabilities2 for MMC_CAP2   Linus Walleij
• arm pmu interrupt on pandaboard   Ming Lei
• [RFC 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Russell King - ARM Linux
• [PATCH 2/3] omap-serial: Add minimal device tree support   Rajendra Nayak
• [PATCH 3/3] ARM: omap: pass minimal SoC/board data for UART from dt   Rajendra Nayak
• [RFC 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Russell King - ARM Linux
• [RFC 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Eric Miao
• [RFC 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Richard Zhao
• [RFC 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Shawn Guo
• [PATCH] ARM: kirkwood: reorder machine_desc initializers   Simon Guinot
• [RFC 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Shawn Guo
• [PATCH] [ARM] APF9328 needs CONFIG_MTD_CFI_INTELEXT to boot on its NOR FLASH.   Gwenhael Goavec-Merou
• [PATCH] arm: mx28: check for gated clocks when setting saif divider   Wolfram Sang
• [RFC 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Shawn Guo
• [PATCH] arm: mx28: check for gated clocks when setting saif divider   Dong Aisheng-B29396
• [PATCH v16 09/12] OMAP: dmtimer: low-power mode support   DebBarma, Tarun Kanti
• [PATCH] ARM: kirkwood: reorder machine_desc initializers   Christophe Vu-Brugier
• [PATCH 1/3] ARM: omap_device: handle first time activation of console device   Cousson, Benoit
• [PATCH 1/3] ARM: omap_hwmod: Add a new state to handle hwmods left enabled at init   Rajendra Nayak
• [PATCH] ARM: omap_hwmod: Add a new state to handle hwmods left enabled at init   Rajendra Nayak
• [PATCH 1/3] ARM: omap_device: handle first time activation of console device   Rajendra Nayak
• [PATCH v3 0/5] ARM: davinci: re-arrange definitions to have a common davinci header   Manjunath Hadli
• [PATCH v3 1/5] ARM: davinci: dm644x: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v3 2/5] ARM: davinci: dm365: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v3 3/5] ARM: davinci: dm646x: remove the macros from the header to move to c file   Manjunath Hadli
• [PATCH v3 4/5] ARM: davinci: create new common platform header for davinci   Manjunath Hadli
• [PATCH v3 5/5] ARM: davinci: delete individual platform header files and use a common header   Manjunath Hadli
• [PATCH] ARM: Do not call flush_cache_user_range with mmap_sem held   Catalin Marinas
• [PATCH] ARM: Do not call flush_cache_user_range with mmap_sem held   Catalin Marinas
• [PATCH 0/3] make stmp-style devices mach-independent   Wolfram Sang
• [PATCH v3 4/5] ARM: davinci: create new common platform header for davinci   Sergei Shtylyov
• [PATCH v3 5/5] ARM: davinci: delete individual platform header files and use a common header   Sergei Shtylyov
• [PATCH] ARM: omap_hwmod: Add a new state to handle hwmods left enabled at init   Cousson, Benoit
• [PATCH] ARM: Do not call flush_cache_user_range with mmap_sem held   Russell King - ARM Linux
• [PATCH] ARM: Do not call flush_cache_user_range with mmap_sem held   Russell King - ARM Linux
• [PATCH v3 4/5] ARM: davinci: create new common platform header for davinci   Sergei Shtylyov
• [PATCH] ARM: omap_hwmod: Add a new state to handle hwmods left enabled at init   Govindraj
• [PATCH] ARM: Do not call flush_cache_user_range with mmap_sem held   Russell King - ARM Linux
• [PATCH 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Richard Zhao
• [PATCH v3 4/5] ARM: davinci: create new common platform header for davinci   Hadli, Manjunath
• [PATCH] ARM: Do not call flush_cache_user_range with mmap_sem held   Catalin Marinas
• [PATCH 0/3] ARM: iommu: tegra: Add initial Tegra IOMMU driver   hdoyu at nvidia.com
• [PATCH 1/3] ARM: iommu: tegra/common: Initial support for IOVMM driver   hdoyu at nvidia.com
• [PATCH 2/3] ARM: iommu: tegra2: Initial support for GART driver   hdoyu at nvidia.com
• [PATCH 3/3] ARM: iommu: tegra3: Initial support for SMMU driver   hdoyu at nvidia.com
• [PATCH] ARM: Do not call flush_cache_user_range with mmap_sem held   Russell King - ARM Linux
• [PATCH 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Eric Miao
• [PATCH 1/4] ARM: exynos4: Add support for AFTR mode cpuidle state   Amit Kachhap
• [RFC 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Eric Miao
• [PATCH] ARM: Do not call flush_cache_user_range with mmap_sem held   Catalin Marinas
• [RFC 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Russell King - ARM Linux
• [PATCH] ARM: omap_hwmod: Add a new state to handle hwmods left enabled at init   Rajendra Nayak
• Crash when memset of shared mapped memory in ARM   Dave Martin
• [PATCH 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Shawn Guo
• [GIT PULL] mxs: fixes for v3.2-rc   Shawn Guo
• [PATCH 1/1] ARM: imx6q: move clock register map to machine_desc.map_io   Eric Miao
• [GIT PULL] imx6q: fix for v3.2-rc   Shawn Guo
• [PATCH] ARM: OMAP: PM: only register TWL with voltage layer when device is present   Premi, Sanjeev
• [PATCH] ARM: fix unwinding for XIP kernels   Uwe Kleine-König
• [PATCH] ARM: l2x0: fix compile error on !CONFIG_USE_OF   Barry Song
• [PATCH 0/4] Consolidate identity mapping code in idmap.c   Dave Martin
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [PATCH] ARM: fix unwinding for XIP kernels   Catalin Marinas
• [PATCH] ARM: CSR: fix build error due to new mdesc->dma_zone_size   Barry Song
• [PATCH] ARM: CSR: PM: fix build error due to undeclared 'THIS_MODULE'   Barry Song
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Dave Martin
• [PATCH] arm/tegra: convert tegra20 to GIC devicetree binding   Peter De Schrijver
• [PATCH v7 01/11] ARM: mmp: fix build error on gpio   Arnd Bergmann
• [PATCH 2/5] ARM: vexpress: Remove platform SMP functions from ct_desc   Russell King - ARM Linux
• [PATCH v7 01/11] ARM: mmp: fix build error on gpio   Eric Miao
• [PATCH 4/5] ARM: vexpress: Initial RS1 memory map support   Russell King - ARM Linux
• [PATCH v3] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [PATCH 1/5] ARM: vexpress: Get rid of MMIO_P2V   Russell King - ARM Linux
• [PATCH] arm/tegra: convert tegra20 to GIC devicetree binding   Rob Herring
• [PATCH] ARM: perf: initialise used_mask for fake PMU during validation   Will Deacon
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Russell King - ARM Linux
• [PATCH] arm/tegra: convert tegra20 to GIC devicetree binding   Peter De Schrijver
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Russell King - ARM Linux
• [PATCH v5 00/10] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH 01/10] arm/tegra: initial device tree for tegra30   Peter De Schrijver
• [PATCH 02/10] arm/tegra: cleanup tegra20 support   Peter De Schrijver
• [PATCH 03/10] arm/tegra: prepare clock code for multiple tegra variants   Peter De Schrijver
• [PATCH 04/10] arm/tegra: prepare early init for multiple tegra variants   Peter De Schrijver
• [PATCH 05/10] arm/tegra: rename tegra20 pinmux files   Peter De Schrijver
• [PATCH 06/10] arm/tegra: prepare pinmux code for multiple tegra variants   Peter De Schrijver
• [PATCH 07/10] arm/tegra: add new fields to struct tegra_pingroup_desc   Peter De Schrijver
• [PATCH 08/10] arm/tegra: pinmux tables and definitions for tegra30   Peter De Schrijver
• [PATCH 09/10] arm/tegra: implement support for tegra30   Peter De Schrijver
• [PATCH 10/10] arm/tegra: add support for tegra30 based board cardhu   Peter De Schrijver
• [PATCH v5 00/10] Add support for tegra30 and cardhu   Peter De Schrijver
• [PATCH 04/10] arm/tegra: prepare early init for multiple tegra variants   Russell King - ARM Linux
• [PATCH v7 01/11] ARM: mmp: fix build error on gpio   Arnd Bergmann
• [PATCH v7 01/11] ARM: mmp: fix build error on gpio   Russell King - ARM Linux
• [PATCH] arm/tegra: convert tegra20 to GIC devicetree binding   Rob Herring
• [GIT PULL] ARM irqchip consolidation   Russell King - ARM Linux
• [PATCH 02/41] ARM: restart: remove poodle restart handler   Russell King - ARM Linux
• [PATCH 28/41] ARM: restart: pxa: use new restart hook   Russell King - ARM Linux
• [PATCH 14/41] ARM: restart: iop3xx: use new restart hook   Russell King - ARM Linux
• [PATCH 15/41] ARM: restart: iop13xx: use new restart hook   Russell King - ARM Linux
• [PATCH 16/41] ARM: restart: ixp2000: use new restart hook   Russell King - ARM Linux
• [PATCH 17/41] ARM: restart: ixp23xx: use new restart hook   Russell King - ARM Linux
• [PATCH 18/41] ARM: restart: ixp4xx: use new restart hook   Russell King - ARM Linux
• [PATCH 6/7] ARM: restart: only perform setup for restart when soft-restarting   Russell King - ARM Linux
• [PATCH 6/7] ARM: restart: only perform setup for restart when soft-restarting   Sascha Hauer
• [PATCH] ARM: unwind: add unwind directives to bitops assembly macros   Will Deacon
• [GIT PULL] ARM irqchip consolidation   Marc Zyngier
• [PATCH 1/2] ARM: mx51/53: correct misuse of _clk_max_enable and _clk_max_disable   Sascha Hauer
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Dave Martin
• [PATCH] ARM: unwind: add unwind directives to bitops assembly macros   Dave Martin
• [PATCH] arm/tegra: convert tegra20 to GIC devicetree binding   Stephen Warren
• [PATCH] ARM: fix unwinding for XIP kernels   Uwe Kleine-König
• [WISH] git-rerere handling delete/modify conflicts [Was: Re: [GIT PULL] ARM irqchip consolidation]   Uwe Kleine-König
• [PATCH 0/3] Support Samsung S5P OHCI device and driver   Greg KH
• [PATCH] ARM: OMAP: PM: only register TWL with voltage layer when device is present   Kevin Hilman
• [PATCH] ARM: omap_hwmod: Add a new state to handle hwmods left enabled at init   Kevin Hilman
• [PATCH] arm: omap2: fix build failure   Kevin Hilman
• [PATCH 01/10] arm/tegra: initial device tree for tegra30   Stephen Warren
• [PATCH 09/10] arm/tegra: implement support for tegra30   Stephen Warren
• [PATCH 1/3] ARM: iommu: tegra/common: Initial support for IOVMM driver   Thierry Reding
• [PATCH] arm/tegra: convert tegra20 to GIC devicetree binding   Grant Likely
• Missing patches for pxa3xx_nand   Artem Bityutskiy
• [PATCH 0/4] Re-sending pxa3xx nand controller patches   Artem Bityutskiy
• [PATCHv2] ARM: OMAP: hsmmc: Fix mux for non-OMAP pins   Thomas Weber
• [PATCH v2 1/2] ARM: use cache type functions for arch_get_unmapped_area   Rob Herring
• [PATCH v2 2/2] ARM: topdown mmap support   Rob Herring
• [PATCH] MTD: nand: Making MTD_NAND_OMAP2 depend on ARCH_OMAP2PLUS   Artem Bityutskiy
• [PATCH] arm: s3c24xx: Add new LCD (W35i) support for Mini2440 board   Denis Kuzmenko
• [PATCHv9 06/18] mfd: omap-prm: added chain interrupt handler   Kevin Hilman
• [PATCH v2 1/2] ARM: use cache type functions for arch_get_unmapped_area   Will Deacon
• [PATCH] ARM: LPC32XX: Use kmemdup rather than duplicating its implementation   Thomas Meyer
• [PATCH] ARM: SAMSUNG: Use kmemdup rather than duplicating its implementation   Thomas Meyer
• s5p tree moved back to kernel.org   Stephen Rothwell
• [PATCH 11/23] ARM: mach-ixp23xx: remove arch specific special handling for ioremap   Deepak Saxena
• [PATCH 1/2] ARM: mx51/53: correct misuse of _clk_max_enable and _clk_max_disable   Richard Zhao
• [GIT PULL v2] pxa: fixes for v3.2-rc1   Eric Miao
• [PATCH] arm: omap2: fix build failure   Ming Lei
• [PATCH v16 09/12] OMAP: dmtimer: low-power mode support   Omar Ramirez Luna
• [PATCH 6/7] ARM: restart: only perform setup for restart when soft-restarting   Viresh Kumar
• [PATCH 6/7] ARM: restart: only perform setup for restart when soft-restarting   Wan ZongShun
• [PATCH 2/2] ARM: mx5: add __initconst for fec pdata   Dong Aisheng-B29396
• [PATCH v5 0/3] ARM: mxs: add recording support for saif   Dong Aisheng-B29396
• [PATCH 1/4] ARM: exynos4: Add support for AFTR mode cpuidle state   MyungJoo Ham
• [alsa-devel] [PATCH v5 1/3] ARM: mxs: add saif clkmux functions   Marek Vasut
• [alsa-devel] [PATCH v5 2/3] ARM: mx28evk: add platform data for saif   Marek Vasut
• [PATCH v3] I2C: add CSR SiRFprimaII on-chip I2C controllers driver   Barry Song
• [V3 2/2] mfd: Convert 88pm860x to use regmap api   Haojian Zhuang
• [alsa-devel] [PATCH v5 1/3] ARM: mxs: add saif clkmux functions   Dong Aisheng-B29396
• [alsa-devel] [PATCH v5 2/3] ARM: mx28evk: add platform data for saif   Dong Aisheng-B29396
• [PATCH] ARM: omap_hwmod: Add a new state to handle hwmods left enabled at init   Rajendra Nayak
• [PATCH 1/2] ARM: mx51/53: correct misuse of _clk_max_enable and _clk_max_disable   Sascha Hauer
• [PATCH 0/4] [orion] move *_mbus_dram_info out of platform_data   Andrew Lunn
• [PATCH 1/4] [orion] Consolidate the address map setup on Orion based platforms.   Andrew Lunn
• [PATCH 2/4] [orion] Move the *_mbus_dram_info structure into the orion platform and call it orion_mbus_dram_info everywhere.   Andrew Lunn
• [PATCH 3/4] [orion] Get address map from plat-orion instead of via platform_data.   Andrew Lunn
• [PATCH 4/4] [orion] Remove address map info from all platform data strucutures.   Andrew Lunn
• [PATCH 2/3] ARM: iommu: tegra2: Initial support for GART driver   Thierry Reding
• [RFC 6/8] of: add clock providers   Sascha Hauer
• [PATCH 18/41] ARM: restart: ixp4xx: use new restart hook   Krzysztof Halasa
• [PATCH 6/7] ARM: restart: only perform setup for restart when soft-restarting   Krzysztof Halasa
• [PATCH 6/7] ARM: restart: only perform setup for restart when soft-restarting   Paul Mundt
• [alsa-devel] [PATCH v5 1/3] ARM: mxs: add saif clkmux functions   Lothar Waßmann
• [PATCH] IMX/DMA : set the DMA direction in the sdma_control()   Huang Shijie
• [alsa-devel] [PATCH v5 1/3] ARM: mxs: add saif clkmux functions   Dong Aisheng-B29396
• [PATCH] ARM: omap_hwmod: Add a new state to handle hwmods left enabled at init   Cousson, Benoit
• [PATCH v7 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   KyongHo Cho
• [PATCH v7 1/2] ARM: EXYNOS: Change System MMU platform device definitions   KyongHo Cho
• [PATCH v7 2/2] iommu/exynos: Add iommu driver for Exynos Platforms   KyongHo Cho
• [PATCH 0/23] mach/vmalloc.h removal, and ioremap optimization   Jamie Iles
• [PATCH 28/41] ARM: restart: pxa: use new restart hook   Richard Purdie
• [PATCH 02/41] ARM: restart: remove poodle restart handler   Richard Purdie
• [PATCH v8] AT91: Add a driver for the ADC   Maxime Ripard
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH 6/7] ARM: restart: only perform setup for restart when soft-restarting   Richard Purdie
• [PATCH 0/3] ARM: iommu: tegra: Add initial Tegra IOMMU driver   KyongHo Cho
• [PATCH 2/2] ARM: mx5: add __initconst for fec pdata   Uwe Kleine-König
• [PATCH 0/3] ARM: iommu: tegra: Add initial Tegra IOMMU driver   Joerg Roedel
• [PATCH v5 0/4] Device tree support for regulators   Rajendra Nayak
• [PATCH v5 1/4] regulator: helper routine to extract regulator_init_data   Rajendra Nayak
• [PATCH v5 2/4] regulator: adapt fixed regulator driver to dt   Rajendra Nayak
• [PATCH v5 3/4] regulator: pass additional of_node to regulator_register()   Rajendra Nayak
• [PATCH v5 4/4] regulator: map consumer regulator based on device tree   Rajendra Nayak
• Porting the 2.6.38 linux kernel to ARM11 MPcore   Molnár Gábor
• [PATCH 1/4] ARM: idmap: populate identity map pgd at init time using .init.text   Catalin Marinas
• [PATCH] arm/tegra: convert tegra20 to GIC devicetree binding   Peter De Schrijver
• [PATCH] arm/tegra: convert tegra20 to GIC devicetree binding   Peter De Schrijver
• [PATCH 1/4] ARM: idmap: populate identity map pgd at init time using .init.text   Will Deacon
• [PATCH 2/5] ARM: vexpress: Remove platform SMP functions from ct_desc   Pawel Moll
• [PATCH 1/5] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [PATCH 4/5] ARM: vexpress: Initial RS1 memory map support   Pawel Moll
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [V3 2/2] mfd: Convert 88pm860x to use regmap api   Samuel Ortiz
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Cousson, Benoit
• [V3 2/2] mfd: Convert 88pm860x to use regmap api   Haojian Zhuang
• [PATCH] spi/pl022: make the chip deselect handling thread safe   Linus Walleij
• [PATCH V2 0/6] SPI platform device consolidation   Padmavathi Venna
• [PATCH V2 1/6] ARM: SAMSUNG: Consolidation of SPI platform devices to plat-samsung   Padmavathi Venna
• [PATCH V2 2/6] ARM: S3C64XX: Modified files for SPI consolidation work   Padmavathi Venna
• [PATCH V2 3/6] ARM: S5PC100: Modified files for SPI consolidation work.   Padmavathi Venna
• [PATCH V2 4/6] ARM: S5P64X0: Modified files for SPI consolidation work   Padmavathi Venna
• [PATCH V2 5/6] ARM: S5PV210: Modified files for SPI consolidation work   Padmavathi Venna
• [PATCH V2 6/6] ARM: S3C64XX: Modified according to SPI consolidation work.   Padmavathi Venna
• [PATCH V2] ARM: EXYNOS4: Add SPI support   Padmavathi Venna
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Will Deacon
• [PATCH v2] fix compilation breakage in entry-armv.S   Dave Martin
• s5p tree moved back to kernel.org   Kukjin Kim
• [PATCH] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   Sylwester Nawrocki
• [PATCH] arm/tegra: convert tegra20 to GIC devicetree binding   Stephen Warren
• [PATCH] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   javier Martin
• [PATCHv17 0/11] Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 01/11] mm: page_alloc: handle MIGRATE_ISOLATE in free_pcppages_bulk()   Marek Szyprowski
• [PATCH 02/11] mm: compaction: introduce isolate_{free,migrate}pages_range().   Marek Szyprowski
• [PATCH 03/11] mm: mmzone: introduce zone_pfn_same_memmap()   Marek Szyprowski
• [PATCH 04/11] mm: compaction: export some of the functions   Marek Szyprowski
• [PATCH 05/11] mm: page_alloc: introduce alloc_contig_range()   Marek Szyprowski
• [PATCH 06/11] mm: mmzone: MIGRATE_CMA migration type added   Marek Szyprowski
• [PATCH 07/11] mm: page_isolation: MIGRATE_CMA isolation functions added   Marek Szyprowski
• [PATCH 08/11] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 09/11] X86: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCH 10/11] ARM: integrate CMA with DMA-mapping subsystem   Marek Szyprowski
• [PATCH 11/11] ARM: Samsung: use CMA for 2 memory banks for s5p-mfc device   Marek Szyprowski
• [PATCH 2/4] ARM: suspend: use idmap_pgd instead of suspend_pgd   Catalin Marinas
• [PATCH 4/4] ARM: idmap: use idmap_pgd when setting up mm for reboot   Catalin Marinas
• [PATCH 4/4] ARM: idmap: use idmap_pgd when setting up mm for reboot   Will Deacon
• [PATCH 2/4] ARM: suspend: use idmap_pgd instead of suspend_pgd   Will Deacon
• [PATCH] ARM: unwind: add unwind directives to bitops assembly macros   Will Deacon
• [PATCH 1/5] ARM: vexpress: Get rid of MMIO_P2V   Russell King - ARM Linux
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Russell King - ARM Linux
• [PATCH 3/5] ARM: vexpress: Add DT support in v2m   Russell King - ARM Linux
• [PATCH] ARM: omap_hwmod: Add a new state to handle hwmods left enabled at init   Kevin Hilman
• [PATCH 4/5] ARM: vexpress: Initial RS1 memory map support   Russell King - ARM Linux
• [PATCH] ARM: OMAP: PM: only register TWL with voltage layer when device is present   Premi, Sanjeev
• [PATCH] ARM: fix unwinding for XIP kernels   Nicolas Pitre
• [PATCH 07/23] ARM: plat-omap: remove arch specific special handling for ioremap   Kevin Hilman
• [PATCH 01/10] arm/tegra: initial device tree for tegra30   Olof Johansson
• [linux-pm] [PATCH] PM: HIBERNATION: skip the swap size check if the snapshot image size is anticipative   Pavel Machek
• [PATCHv9 07/18] mfd: omap-prm: added suspend prepare and complete callbacks   Kevin Hilman
• [PATCH 03/10] arm/tegra: prepare clock code for multiple tegra variants   Olof Johansson
• [PATCHv9 06/18] mfd: omap-prm: added chain interrupt handler   Felipe Balbi
• [PATCH 0/2] ARM: OMAP: misc. PM fixes for v3.2-rc   Kevin Hilman
• [PATCH 1/2] ARM: OMAP: PM: only register TWL with voltage layer when device is present   Kevin Hilman
• [PATCH 2/2] arm: omap: smartreflex: fix IRQ handling bug   Kevin Hilman
• [PATCH 01/10] arm/tegra: initial device tree for tegra30   Rob Herring
• [PATCH 18/41] ARM: restart: ixp4xx: use new restart hook   Russell King - ARM Linux
• [PATCH] ARM: w90x900: add common nuc9xx.h   Russell King - ARM Linux
• [PATCH 03/10] arm/tegra: prepare clock code for multiple tegra variants   Stephen Warren
• Question about unaligned memory access on ARMv7   Haohui Mai
• Question about unaligned memory access on ARMv7   Måns Rullgård
• [GIT PULL] cpufreq: OMAP: move to drivers/cpufreq and updates for v3.3   Kevin Hilman
• [Linaro-mm-sig] [PATCHv17 0/11] Contiguous Memory Allocator   sandeep patil
• [PATCH v8 17/20] OMAP2+: UART: Use custom activate func for console uart.   Kevin Hilman
• [PATCH 03/10] arm/tegra: prepare clock code for multiple tegra variants   Olof Johansson
• [Linaro-mm-sig] [PATCHv17 0/11] Contiguous Memory Allocator   Michal Nazarewicz
• [PATCHv9 05/18] mfd: omap-prm: add driver skeleton   Kevin Hilman
• [PATCH] ARM: fix unwinding for XIP kernels   Catalin Marinas
• [PATCH 03/10] arm/tegra: prepare clock code for multiple tegra variants   Stephen Warren
• [PATCH 06/10] arm/tegra: prepare pinmux code for multiple tegra variants   Olof Johansson
• [PATCH 08/10] arm/tegra: pinmux tables and definitions for tegra30   Olof Johansson
• [PATCH 01/10] arm/tegra: initial device tree for tegra30   Olof Johansson
• [PATCH 08/10] arm/tegra: pinmux tables and definitions for tegra30   Stephen Warren
• [PATCH 08/10] arm/tegra: pinmux tables and definitions for tegra30   Olof Johansson
• [PATCH 01/10] arm/tegra: initial device tree for tegra30   Rob Herring
• [PATCH 18/41] ARM: restart: ixp4xx: use new restart hook   Krzysztof Halasa
• [PATCH] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   Robert Schwebel
• ARM SWP/SWPB emulation support   Stepan Moskovchenko
• [Linaro-mm-sig] [PATCHv17 0/11] Contiguous Memory Allocator   sandeep patil
• [GIT PULL] ARM: OMAP: hwmod fix for 3.2-rc3   Tony Lindgren
• [PATCH 0/2] ARM: OMAP: misc. PM fixes for v3.2-rc   Tony Lindgren
• [PATCH 0/2] ARM: OMAP: misc. PM fixes for v3.2-rc   Tony Lindgren
• [GIT PULL] ARM: OMAP: DSS hwmod/reset fixes for 3.2   Tony Lindgren
• [PATCH 1/4] ARM: OMAP3: cm-t35: add regulator supply for ads7846   Tony Lindgren
• [PATCH 2/4] mmc: omap: adapt the hsmmc driver to device tree   Tony Lindgren
• [PATCH] arm: omap2: select ARM_AMBA if OMAP3_EMU is defined   Tony Lindgren
• [PATCH/RESEND #3 1/7] OMAP3+: PM: SR: add suspend/resume handlers   Menon, Nishanth
• [linux-pm] [PATCH] PM: HIBERNATION: skip the swap size check if the snapshot image size is anticipative   Barry Song
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   Mika Westerberg
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Ming Lei
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Ming Lei
• ARM SWP/SWPB emulation support   Catalin Marinas
• [Linaro-mm-sig] [PATCHv17 0/11] Contiguous Memory Allocator   Michal Nazarewicz
• [PATCH] ARM: sa1100: Fix nanoengine compile error.   Jochen Friedrich
• [PATCH] ARM: sa1100: collie: Remove irq_to_gpio from power driver   Jochen Friedrich
• [PATCH v2] fix compilation breakage in entry-armv.S   Russell King - ARM Linux
• [GIT PULL] omap fixes for v3.2-rc2   Tony Lindgren
• [PATCH] arm: Add condition code check to SWP emulator   Stepan Moskovchenko
• [PATCH 1/1 v4] arm: fault.c: Port OOM changes into do_page_fault   kautuk.c at samsung.com
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Paul Walmsley
• [PATCH 1/4] ARM: OMAP3: cm-t35: add regulator supply for ads7846   Igor Grinberg
• [PATCH] arm: Add condition code check to SWP emulator   Russell King - ARM Linux
• [PATCH] arm: Add condition code check to SWP emulator   Catalin Marinas
• [PATCH] ARM: fix unwinding for XIP kernels   Uwe Kleine-König
• [RFC PATCH 00/11] arm:omap:am33xx: Add basic voltage, power, clock & HWMOD data   Vaibhav Hiremath
• [RFC PATCH 01/11] arm:omap:am33xx: Add voltage domain data   Vaibhav Hiremath
• [RFC PATCH 02/11] arm:omap:am33xx: Integrate voltage domain data   Vaibhav Hiremath
• [RFC PATCH 03/11] arm:omap:am33xx: Add power domain data   Vaibhav Hiremath
• [RFC PATCH 04/11] arm:omap:am33xx: Integrate powerdomain to OMAP power framework   Vaibhav Hiremath
• [RFC PATCH 06/11] arm:omap:am33xx: Integrate clock & clockdomain to OMAP clock framework   Vaibhav Hiremath
• [RFC PATCH 07/11] arm:omap:am33xx: Add irq, dma and module base addr to SoC header files   Vaibhav Hiremath
• [RFC PATCH 08/11] arm:omap:am33xx: Add HWMOD data   Vaibhav Hiremath
• [RFC PATCH 09/11] arm:omap:am33xx: Integrate AM33XX hwmods to omap HWMOD framework   Vaibhav Hiremath
• [RFC PATCH 10/11] ARM:omap:am33xx: Add clock control api's   Vaibhav Hiremath
• [RFC PATCH 11/11] arm:omap:am33xx: Add am335x support in generic omap_hwmod   Vaibhav Hiremath
• [PATCH] ARM: Do not call flush_cache_user_range with mmap_sem held   Olof Johansson
• [PATCH] ARM: sa1100: refactor sa1100 serial driver   Jochen Friedrich
• [PATCH] Initial DT support for SIMpad devices.   Jochen Friedrich
• [PATCH] ARM: sa1100: refactor sa1100 serial driver   Joe Perches
• [PATCH] ARM: sa1100: refactor sa1100 serial driver   Joe Perches
• [PATCH] ARM: fix unwinding for XIP kernels   Uwe Kleine-König
• [PATCH RFC] ARM: unwind: optimize to not convert each table value but the address   Uwe Kleine-König
• [PATCH v1] dts: tegra-ventana: use proper root instead of /dev/ram   Olof Johansson
• [PATCH V1] ARM: mmp: fix gpio operation error   Neil Zhang
• [PATCH V1] ARM: mmp: fix gpio operation error   Neil Zhang
• [PATCH 6/7] ARM: restart: only perform setup for restart when soft-restarting   Eric Miao
• [PATCH] ARM: w90x900: add common nuc9xx.h   Wan ZongShun
• [PATCH 1/4] mmc: sdhci-pxa: Trivial fix in Kconfig   Tanmay Upadhyay
• [PATCH v3 2/4] ARM: pxa168: Add SDHCI support   Tanmay Upadhyay
• [PATCH v2 3/4] mmc: sdhci-pxa: Add SDHCI driver for PXA16x   Tanmay Upadhyay
• [PATCH v2 4/4] ARM: pxa168/gplugd: Add support for SD port 1   Tanmay Upadhyay
• [PATCH V1] ARM: mmp: fix gpio operation error   Haojian Zhuang
• [PATCH 0/3] ARM: iommu: tegra: Add initial Tegra IOMMU driver   Hiroshi Doyu
• [PATCH 1/6] ARM: fix be8 support for phys/virt address conversion   Bi Junxiao
• [PATCH v2] ARM: OMAP2+: hwmod: Add a new state to handle hwmods left enabled at init   Rajendra Nayak
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   Rafal Prylowski
• [PATCH v6 0/3] ARM: mxs: add recording support for saif   Dong Aisheng
• [PATCH v6 1/3] ARM: mxs: add saif clkmux functions   Dong Aisheng
• [PATCH v6 2/3] ARM: mx28evk: add platform data for saif   Dong Aisheng
• [PATCH v6 3/3] ARM: mx28evk: set a initial clock rate for saif   Dong Aisheng
• [RFC][PATCH] gpiolib: add irq_wake (power-management) sysfs file   Linus Walleij
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   Mika Westerberg
• [PATCH 1/3] ARM: iommu: tegra/common: Initial support for IOVMM driver   Hiroshi Doyu
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   Vinod Koul
• [alsa-devel] [PATCH v6 0/3] ARM: mxs: add recording support for saif   Marek Vasut
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   Rafal Prylowski
• [PATCH] ARM: mxs: fix machines' initializers order   Lauri Hintsala
• [GIT PULL] ARM: OMAP: hwmod fix for 3.2-rc3   Cousson, Benoit
• [alsa-devel] [PATCH v6 0/3] ARM: mxs: add recording support for saif   Dong Aisheng-B29396
• [PATCH] ARM: mxs: fix machines' initializers order   Russell King - ARM Linux
• [PATCH] Initial DT support for SIMpad devices.   Jamie Iles
• [01: PATCH 0/7] Preparation for arch_reset changes   Russell King - ARM Linux
• [GIT PULL] Support for Cadence GEM in the MACB driver   Jamie Iles
• [PATCH v2] ARM: OMAP2+: hwmod: Add a new state to handle hwmods left enabled at init   Govindraj
• [PATCH] hwspinlock: core: support for TEGRA hardware spinlocks   Ohad Ben-Cohen
• [PATCH v2] ARM: unwind: add unwind directives to bitops assembly macros   Will Deacon
• [GIT PULL] Samsung fixes for v3.2   Kukjin Kim
• [GIT PULL] Missing CPU mapping updates   Will Deacon
• [PATCH 0/2 REPOST] ARM: amba: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 1/2] ARM: amba: Move definition of struct amba_id to mod_devicetable.h   Dave Martin
• [PATCH 2/2] ARM: amba: Auto-generate AMBA driver module aliases during modpost   Dave Martin
• [PATCH v2] ARM: OMAP2+: hwmod: Add a new state to handle hwmods left enabled at init   Rajendra Nayak
• [PATCH v3] ARM: OMAP2+: hwmod: Add a new state to handle hwmods left enabled at init   Rajendra Nayak
• [PATCH] arm/tegra: convert tegra20 to GIC devicetree binding   Peter De Schrijver
• [PATCH 0/2 REPOST] ARM: amba: Enable module alias autogeneration for AMBA drivers   Russell King - ARM Linux
• [PATCH 03/10] arm/tegra: prepare clock code for multiple tegra variants   Peter De Schrijver
• [PATCHv9 07/18] mfd: omap-prm: added suspend prepare and complete callbacks   Tero Kristo
• [PATCHv9 06/18] mfd: omap-prm: added chain interrupt handler   Tero Kristo
• [PATCH 2/2] ARM: amba: Auto-generate AMBA driver module aliases during modpost   Uwe Kleine-König
• Porting the 2.6.38 linux kernel to ARM11 MPcore   Catalin Marinas
• [PATCH] ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35'   Paul Bolle
• [PATCH] ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35'   Russell King - ARM Linux
• [PATCH 2/3] staging: nvec: add device tree support   Marc Dietrich
• [PATCH 13/13] ARM: at91: make rm9200 rtc drivers soc independent   Nicolas Ferre
• [PATCH v8 17/20] OMAP2+: UART: Use custom activate func for console uart.   Govindraj
• [PATCH v2] arm/imx: fix the references to ARCH_MX3   Paul Bolle
• [PATCH v8 17/20] OMAP2+: UART: Use custom activate func for console uart.   Govindraj
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Will Deacon
• [PATCH 0/2 REPOST] ARM: amba: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 2/2] ARM: amba: Auto-generate AMBA driver module aliases during modpost   Dave Martin
• [PATCH v2] ARM: unwind: add unwind directives to bitops assembly macros   Dave Martin
• [PATCH 06/10] arm/tegra: prepare pinmux code for multiple tegra variants   Peter De Schrijver
• [PATCH] Initial DT support for SIMpad devices.   Jochen Friedrich
• [PATCH] ARM: sa1100: refactor sa1100 serial driver   Jochen Friedrich
• [PATCH] ARM: sa1100: refactor sa1100 serial driver   Jamie Iles
• [PATCH] ARM: sa1100: refactor sa1100 serial driver   Jochen Friedrich
• [PATCH] Initial DT support for SIMpad devices.   Jamie Iles
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Ming Lei
• [PATCH 1/4] ARM: ftrace: use canonical Thumb-2 wide instruction format   Rabin Vincent
• [PATCH 2/4] ARM: extract out insn generation code from ftrace   Rabin Vincent
• [PATCH 3/4] ARM: extract out code patch function from kprobes   Rabin Vincent
• [PATCH 4/4] ARM: add jump label support   Rabin Vincent
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Will Deacon
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Ming Lei
• [RFC 6/8] of: add clock providers   Shawn Guo
• [RFC 3/8] of: create of_phandle_args to simplify return of phandle parsing data   Shawn Guo
• [PATCH RFC] ARM: unwind: optimize to not convert each table value but the address   Catalin Marinas
• [PATCH] ARM: OMAP: dmtimer: fix missing content/correction in low-power mode support   Ramirez Luna, Omar
• [PATCH v1] dts: tegra-ventana: use proper root instead of /dev/ram   Stephen Warren
• [PATCH] arm/tegra: convert tegra20 to GIC devicetree binding   Stephen Warren
• [PATCH 0/3] Support Samsung S5P OHCI device and driver   Greg KH
• [PATCH 06/10] arm/tegra: prepare pinmux code for multiple tegra variants   Stephen Warren
• [GIT PULL] ARM perf fixes for 3.2   Will Deacon
• [RFC PATCH] arm/imx6: convert clock to device tree   Rob Herring
• [PATCH RFC] ARM: unwind: optimize to not convert each table value but the address   Uwe Kleine-König
• [PATCH v2] ARM: mx31pdk: Add MC13783 RTC support   Fabio Estevam
• [PATCH] ARM: mx5: Fix checkpatch warnings in cpu-imx5.c   Fabio Estevam
• [PATCH 1/4] [RFC] Add generic ARM instruction set condition code checks.   Leif Lindholm
• [PATCH 2/4] [RFC] Use generic ARM instruction set condition code checks for nwfpe.   Leif Lindholm
• [PATCH 3/4] [RFC] Add condition code checking to SWP emulation handler.   Leif Lindholm
• [PATCH 4/4] [RFC] Use generic ARM instruction set condition code checks for kprobes.   Leif Lindholm
• [PATCH 1/6] ARM: fix be8 support for phys/virt address conversion   Nicolas Pitre
• [PATCH] arm: Add condition code check to SWP emulator   Leif Lindholm
• [PATCH] ARM: fix unwinding for XIP kernels   Catalin Marinas
• [PATCH v3] ARM: OMAP2+: hwmod: Add a new state to handle hwmods left enabled at init   Kevin Hilman
• [PATCH 1/4] [RFC] Add generic ARM instruction set condition code checks.   Will Deacon
• [PATCH 3/4] [RFC] Add condition code checking to SWP emulation handler.   Will Deacon
• [PATCH 1/4] [RFC] Add generic ARM instruction set condition code checks.   Russell King - ARM Linux
• [PATCH 2/6] ARM: gic: fix big endian support   Nicolas Pitre
• [PATCH 5/6] ARM: Atomic64: fix 64bit ops in BE mode   Nicolas Pitre
• [PATCH 6/6] ARM: support kernel modules in BE8 mode   Nicolas Pitre
• Git pull request: removal, and ioremap optimization   Nicolas Pitre
• [PATCHv2] ARM: sa1100: refactor sa1100 serial driver   Jochen Friedrich
• [PATCHv2] Initial DT support for SIMpad devices.   Jochen Friedrich
• [PATCH 1/5] arm/dt: tegra: Remove /memreserve/ from device-tree files   Stephen Warren
• [PATCH 2/5] arm/dt: tegra: Remove /chosen node   Stephen Warren
• [PATCH 3/5] arm/dt: tegra: Fix I2C nodes to match board files   Stephen Warren
• [PATCH 4/5] arm/dt: tegra: Fix serial nodes to match board files   Stephen Warren
• [PATCH 5/5] arm/dt: tegra: Fix SDHCI nodes to match board files   Stephen Warren
• [GIT PULL] ARM irqchip consolidation   Russell King - ARM Linux
• [GIT PULL] Samsung fixes for v3.2   Kyungmin Park
• Porting the 2.6.38 linux kernel to ARM11 MPcore   Molnár Gábor
• [PATCH] ARM: mx5: Fix checkpatch warnings in cpu-imx5.c   Joe Perches
• [RFC PATCH] arm/imx6: convert clock to device tree   Shawn Guo
• [PATCH 6/6] ARM: support kernel modules in BE8 mode   Bi Junxiao
• [PATCH v3 0/5] common clk framework   Mike Turquette
• [PATCH v3 1/5] clk: Kconfig: add entry for HAVE_CLK_PREPARE   Mike Turquette
• [PATCH v3 2/5] Documentation: common clk API   Mike Turquette
• [PATCH v3 3/5] clk: introduce the common clock framework   Mike Turquette
• [PATCH v3 4/5] clk: basic gateable and fixed-rate clks   Mike Turquette
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Mike Turquette
• [PATCH 2/6] ARM: gic: fix big endian support   Bi Junxiao
• [RFC PATCH 0/3] Convert imx6 clock to device tree   Shawn Guo
• [RFC PATCH 1/3] arm/imx6: describe clocks in device tree source   Shawn Guo
• [RFC PATCH 2/3] arm/imx: add a generic clock implementation for imx   Shawn Guo
• [RFC PATCH 3/3] arm/imx6: convert clock to device tree   Shawn Guo
• [PATCH] ASoC: SAMSUNG: Fix build error   Boojin Kim
• [PATCH v2 2/2] ARM: topdown mmap support   Rob Herring
• [PATCH v2 2/2] ARM: topdown mmap support   Nicolas Pitre
• [PATCH 2/6] ARM: gic: fix big endian support   Nicolas Pitre
• [PATCH 6/6] ARM: support kernel modules in BE8 mode   Nicolas Pitre
• [PATCH] IMX/DMA : set the DMA direction in the sdma_control()   Vinod Koul
• [PATCH 2/6] ARM: gic: fix big endian support   Bi Junxiao
• [PATCH 6/6] ARM: support kernel modules in BE8 mode   Bi Junxiao
• [PATCH] ARM: mxs: fix machines' initializers order   Shawn Guo
• [PATCH 1/2] ARM: mxs/tx28: add __initconst for fec pdata   Shawn Guo
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   Mika Westerberg
• [PATCH] ARM: Kota2 mach-type update fix   Magnus Damm
• [PATCH 1/1] mmc: sdhci-esdhc: Change delay after setting clock from 100ms to 1ms   Tony Lin
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   Mika Westerberg
• [RFC PATCH 0/3] Convert imx6 clock to device tree   Sascha Hauer
• [PATCH 1/7] spi/pl022: only enable RX interrupts when TX is complete   Linus Walleij
• [PATCH 2/7] spi/pl022: fix build warnings   Linus Walleij
• [PATCH 3/7] spi/pl022: skip default configuration before suspending   Linus Walleij
• [PATCH 4/7] spi/pl022: move device disable to workqueue thread   Linus Walleij
• [PATCH 5/7] spi/pl022: disable the PL022 block when unused   Linus Walleij
• [PATCH 6/7] spi/pl022: add support for pm_runtime autosuspend   Linus Walleij
• [PATCH 7/7] spi/pl022: make the chip deselect handling thread safe   Linus Walleij
• [PATCH 3/7] spi/pl022: skip default configuration before suspending   Viresh Kumar
• [PATCH 4/7] spi/pl022: move device disable to workqueue thread   Viresh Kumar
• [PATCH 7/7] spi/pl022: make the chip deselect handling thread safe   Viresh Kumar
• [PATCH 5/5] arm/dt: tegra: Fix SDHCI nodes to match board files   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   Rafal Prylowski
• [PATCH 3/4] ARM: extract out code patch function from kprobes   Tixy
• [RFC PATCH 1/3] arm/imx6: describe clocks in device tree source   Sascha Hauer
• [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Uwe Kleine-König
• [PATCH 0/2] imx fixes for next-20111122   Uwe Kleine-König
• [PATCH] ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35'   Sascha Hauer
• [PATCH 1/2] ARM: imx/mm-imx3: conditionally compile i.MX31 and i.MX35 code   Uwe Kleine-König
• [PATCH 2/2] ARM: imx: export imx_ioremap to allow modules to use ioremap   Uwe Kleine-König
• [PATCH 4/4] [RFC] Use generic ARM instruction set condition code checks for kprobes.   Tixy
• [PATCH] ARM: Kota2 mach-type update fix   Paul Mundt
• [PATCH 4/7] spi/pl022: move device disable to workqueue thread   Linus Walleij
• 3.2-rc2 compile error   Tim Sander
• [PATCH V3 0/6] ARM: exynos: Add l2 retention mode cpuidle state   Amit Daniel Kachhap
• [PATCH V3 1/6] ARM: exynos: Add AFTR mode cpuidle state on EXYNOS4210   Amit Daniel Kachhap
• [PATCH V3 2/6] ARM: s5p: remove useless churn in sleep.S   Amit Daniel Kachhap
• [PATCH V3 3/6] ARM: exynos: save L2 settings during bootup   Amit Daniel Kachhap
• [PATCH V3 4/6] ARM: s5p: add L2 early resume code   Amit Daniel Kachhap
• [PATCH V3 5/6] ARM: exynos: remove useless code to save/restore L2   Amit Daniel Kachhap
• [PATCH V3 6/6] ARM: exynos: Enable l2 configuration through device tree   Amit Daniel Kachhap
• [PATCHv2] Initial DT support for SIMpad devices.   Jamie Iles
• [PATCH V3 2/6] ARM: s5p: remove useless churn in sleep.S   Russell King - ARM Linux
• [PATCH V3 3/6] ARM: exynos: save L2 settings during bootup   Russell King - ARM Linux
• 3.2-rc2 compile error   Uwe Kleine-König
• [GIT PULL] Support for Cadence GEM in the MACB driver   Jean-Christophe PLAGNIOL-VILLARD
• Inclusion of ARM perf tree in linux-next   Will Deacon
• [PATCH 21/23] ARM: add generic ioremap optimization by reusing static mappings   Russell King - ARM Linux
• [PATCH 1/4] [RFC] Add generic ARM instruction set condition code checks.   Dave Martin
• [GIT PULL] Support for Cadence GEM in the MACB driver   Jamie Iles
• [PATCH 2/6] ARM: gic: fix big endian support   Dave Martin
• [PATCH] ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35'   Sascha Hauer
• [PATCH v2] ARM: mx31pdk: Add MC13783 RTC support   Sascha Hauer
• [GIT PULL] i.MXf fixes/cleanups   Sascha Hauer
• [PATCH 1/5] arm/dt: tegra: Remove /memreserve/ from device-tree files   Marc Dietrich
• [PATCH] dma i.MX: remove individual SOC dependency   Sascha Hauer
• [PATCH v2] arm/imx: fix the references to ARCH_MX3   Sascha Hauer
• [PATCH 6/6] ARM: support kernel modules in BE8 mode   Dave Martin
• [PATCH v2] arm/imx: fix the references to ARCH_MX3   Paul Bolle
• [PATCH v4 1/2] dmaengine: at_hdmac: platform data move to use .id_table   Nicolas Ferre
• [PATCH 1/3] dmaengine: at_hdmac: add const to struct platform_device_id definition   Nicolas Ferre
• [PATCH 2/3] dmaengine: at_hdmac: empty entry shape modification   Nicolas Ferre
• [PATCH 3/3] dmaengine: at_hdmac: simplify device selection from platform data or DT   Nicolas Ferre
• [01: PATCH 0/7] Preparation for arch_reset changes   Will Deacon
• [GIT PULL] ARM: amba: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH 0/7] Introducing a generic AMP framework   Ohad Ben-Cohen
• [PATCH] ARM: Kota2 mach-type update fix   Magnus Damm
• [GIT PULL] ARM irqchip consolidation   Marc Zyngier
• [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Will Deacon
• [GIT PULL] ARM: amba: Enable module alias autogeneration for AMBA drivers   Alessandro Rubini
• Add support form eMMa-PrP in i.MX2 chips as a mem2mem device.   Javier Martin
• [PATCH v2 1/2] MX2: Add platform definitions for eMMa-PrP device.   Javier Martin
• [PATCH v2 2/2] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   Javier Martin
• [PATCH 1/4] ARM: ftrace: use canonical Thumb-2 wide instruction format   Dave Martin
• [PATCH 2/4] ARM: extract out insn generation code from ftrace   Dave Martin
• [GIT PULL] ARM: amba: Enable module alias autogeneration for AMBA drivers   Dave Martin
• [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Uwe Kleine-König
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Arnd Bergmann
• [PATCH v3 4/5] clk: basic gateable and fixed-rate clks   Arnd Bergmann
• [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Will Deacon
• [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Uwe Kleine-König
• [PATCH 2/4] ARM: extract out insn generation code from ftrace   Rabin Vincent
• [PATCH v6 2/5] ARM: reset: implement soft_restart for jumping to a physical address   Catalin Marinas
• [PATCH v6 1/5] ARM: lib: add call_with_stack function for safely changing stack   Catalin Marinas
• [PATCH v2 0/4] OMAP serial device tree support   Rajendra Nayak
• [PATCH v2 1/4] omap-serial: Get rid of all pdev->id usage   Rajendra Nayak
• [PATCH v2 2/4] omap-serial: Use default clock speed (48Mhz) if not specified   Rajendra Nayak
• [PATCH v2 3/4] omap-serial: Add minimal device tree support   Rajendra Nayak
• [PATCH v2 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Rajendra Nayak
• [PATCH 21/23] ARM: add generic ioremap optimization by reusing static mappings   Nicolas Pitre
• placeholder for GPIO based PWM Haptics Driver   Hebbar, Gururaja
• [PATCH v6 2/5] ARM: reset: implement soft_restart for jumping to a physical address   Dave Martin
• [PATCH 2/4] ARM: extract out insn generation code from ftrace   Dave Martin
• [PATCH 1/3] omap_hsmmc: consider MMC_PM_KEEP_POWER on suspend/resume   Eliad Peller
• [PATCH 2/3] omap_hsmmc: add pm_caps field   Eliad Peller
• [PATCH 3/3] omap: board-sdp4430: declare support for MMC_PM_KEEP_POWER   Eliad Peller
• [PATCH v6 2/5] ARM: reset: implement soft_restart for jumping to a physical address   Will Deacon
• [PATCH v8] AT91: Add a driver for the ADC   Maxime Ripard
• Inclusion of ARM perf tree in linux-next   Stephen Rothwell
• [PATCH v8] AT91: Add a driver for the ADC   Nicolas Ferre
• [GIT PULL] Support for Cadence GEM in the MACB driver   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 4/5] clk: basic gateable and fixed-rate clks   Mark Salter
• [GIT PULL] ARM: amba: Enable module alias autogeneration for AMBA drivers   Alessandro Rubini
• [01: PATCH 0/7] Preparation for arch_reset changes   Russell King - ARM Linux
• [01: PATCH 0/7] Preparation for arch_reset changes   Will Deacon
• [PATCH v3 0/5] common clk framework   Greg KH
• [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Russell King - ARM Linux
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Greg KH
• [PATCH v3 4/5] clk: basic gateable and fixed-rate clks   Arnd Bergmann
• [PATCH v2 1/1] ASoC: mxs-saif: remove function in platform_data   Dong Aisheng
• [PATCH v7 0/3] ARM: mxs: add recording support for saif   Dong Aisheng
• [PATCH v7 1/3] ARM: mxs: add saif clkmux functions   Dong Aisheng
• [PATCH v7 2/3] ARM: mx28evk: add platform data for saif   Dong Aisheng
• [PATCH v7 3/3] ARM: mx28evk: set a initial clock rate for saif   Dong Aisheng
• [PATCH 5/5] arm/dt: tegra: Fix SDHCI nodes to match board files   Stephen Warren
• [PATCH 5/5] arm/dt: tegra: Fix SDHCI nodes to match board files   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/5] arm/dt: tegra: Remove /memreserve/ from device-tree files   Stephen Warren
• [PATCH v5 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   Voss, Nikolaus
• [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Uwe Kleine-König
• [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Mark Brown
• [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Uwe Kleine-König
• [PATCH 1/4] ARM: PL330: Don't call the callbacks if there isn't any active transfer   Javi Merino
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Mike Turquette
• [PATCH v3 0/5] common clk framework   Russell King - ARM Linux
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Mike Turquette
• [PATCH 1/4] ARM: ftrace: use canonical Thumb-2 wide instruction format   Rabin Vincent
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Mike Turquette
• [PATCH 3/4] ARM: extract out code patch function from kprobes   Rabin Vincent
• [PATCH v3 0/5] common clk framework   Mike Turquette
• [PATCH 1/1 v5] arm: fault.c: Port OOM changes into do_page_fault   Kautuk Consul
• [GIT PULL] ARM perf fixes for 3.2   Will Deacon
• [PATCH 1/1 v4] arm: fault.c: Port OOM changes into do_page_fault   kautuk.c at samsung.com
• [PATCH 2/4] ARM: extract out insn generation code from ftrace   Rabin Vincent
• [PATCH 1/1 v5] arm: fault.c: Port OOM changes into do_page_fault   Kautuk Consul
• [PATCH 1/1 v5] arm: fault.c: Port OOM changes into do_page_fault   kautuk.c at samsung.com
• [PATCH 06/10] arm/tegra: prepare pinmux code for multiple tegra variants   Olof Johansson
• [PATCH v3 0/5] common clk framework   Greg KH
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Greg KH
• [PATCH 1/1 v5] arm: fault.c: Port OOM changes into do_page_fault   Russell King - ARM Linux
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Grant Likely
• [GIT PULL] ARM: amba: Enable module alias autogeneration for AMBA drivers   Greg KH
• -next fails to boot as of today on S3C6410   Mark Brown
• [PATCH v2 1/2] MX2: Add platform definitions for eMMa-PrP device.   Sylwester Nawrocki
• [PATCH v3 0/5] common clk framework   Mark Brown
• -next fails to boot as of today on S3C6410   Russell King - ARM Linux
• -next fails to boot as of today on S3C6410   Mark Brown
• [PATCH] ASoC: SAMSUNG: Fix build error   Mark Brown
• [PATCH 4/4] ARM: add jump label support   Russell King - ARM Linux
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Arnd Bergmann
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Turquette, Mike
• [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Russell King - ARM Linux
• [PATCH 1/2] ARM: debug: Add CLSP711X_UART1 config choice   Russell King - ARM Linux
• [PATCH v2 2/2] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   Sylwester Nawrocki
• [PATCH v2 2/2] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   Sascha Hauer
• [PATCH v8] AT91: Add a driver for the ADC   Jonathan Cameron
• [PATCH v2 1/2] MX2: Add platform definitions for eMMa-PrP device.   Sascha Hauer
• [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Arnd Bergmann
• [PATCH 1/5] arm/dt: tegra: Remove /memreserve/ from device-treefiles   Marc Dietrich
• -next fails to boot as of today on S3C6410   Jamie Iles
• -next fails to boot as of today on S3C6410   Mark Brown
• [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Mark Brown
• [PATCH 4/4] ARM: add jump label support   Stephen Boyd
• -next fails to boot as of today on S3C6410   Jamie Iles
• -next fails to boot as of today on S3C6410   Rob Herring
• [PATCH 4/4] ARM: add jump label support   Jason Baron
• [PATCH 4/4] ARM: add jump label support   Jason Baron
• [PATCH v2] video: support MIPI-DSI controller driver   Kyungmin Park
• [PATCH] arm/tegra: Fix build error with tegra_assert_system_reset   Stephen Warren
• [PATCH 00/17] ASoC: Add Tegra DT, cleanup, and related   Stephen Warren
• [PATCH 01/17] arm/tegra: board-dt: audio: Enable clocks, fix AUXDATA   Stephen Warren
• [PATCH 02/17] arm/dt: Tegra: Clean up I2S and DAS nodes   Stephen Warren
• [PATCH 03/17] arm/dt: Tegra: Enable audio on WM8903 boards, disable others   Stephen Warren
• [PATCH 04/17] ASoC: Add device tree binding for WM8903   Stephen Warren
• [PATCH 05/17] ASoC: Tegra: Move DAS configuration into machine drivers   Stephen Warren
• [PATCH 06/17] ASoC: Tegra PCM: Use module_platform_driver   Stephen Warren
• [PATCH 07/17] ASoC: Tegra DAS: Use devm_ APIs and module_platform_driver   Stephen Warren
• [PATCH 08/17] ASoC: Tegra I2S: Use devm_ APIs and module_platform_driver   Stephen Warren
• [PATCH 09/17] ASoC: Tegra I2S: Remove dependency on pdev->id   Stephen Warren
• [PATCH 10/17] ASoC: Tegra DAS: Add device tree binding   Stephen Warren
• [PATCH 11/17] ASoC: Tegra I2S: Add device tree binding   Stephen Warren
• [PATCH 12/17] ASoC: Tegra+WM8903 machine: Use devm_ APIs and module_platform_driver   Stephen Warren
• [PATCH 13/17] ASoC: Tegra TrimSlice machine: Use devm_ APIs and module_platform_driver   Stephen Warren
• [PATCH 14/17] ASoC: Implement "auto nc pins" feature   Stephen Warren
• [PATCH 15/17] ASoC: Tegra+WM903 machine: Use new auto_nc_codec_pins feature   Stephen Warren
• [PATCH 16/17] ASoC: TrimSlice machine: Use new auto_nc_codec_pins feature   Stephen Warren
• [PATCH 17/17] ASoC: Tegra+WM8903 machine: Add device tree binding   Stephen Warren
• [PATCH 0/7] Introducing a generic AMP framework   Rusty Russell
• [PATCH v3 2/5] Documentation: common clk API   Saravana Kannan
• [PATCH 2/6] ARM: gic: fix big endian support   Bi Junxiao
• [PATCH v3 3/5] clk: introduce the common clock framework   Saravana Kannan
• [PATCH 06/10] arm/tegra: prepare pinmux code for multiple tegra variants   Peter De Schrijver
• [PATCH 1/1 v5] arm: fault.c: Port OOM changes into do_page_fault   kautuk.c at samsung.com
• [PATCH 0/7] Introducing a generic AMP framework   Saravana Kannan
• [PATCH 1/7] amp/remoteproc: add framework for controlling remote processors   Stephen Boyd
• [PATCH 6/6] ARM: support kernel modules in BE8 mode   Bi Junxiao
• [PATCH 1/1 v5] arm: fault.c: Port OOM changes into do_page_fault   kautuk.c at samsung.com
• [PATCH] ARM: mm: ensure TTBR0 is restored when changing ASID on rollover   Stephen Boyd
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Saravana Kannan
• [PATCH] arm/tegra: convert tegra20 to GIC devicetree binding   Peter De Schrijver
• [PATCH V3 3/6] ARM: exynos: save L2 settings during bootup   amit kachhap
• [PATCH 07/17] ASoC: Tegra DAS: Use devm_ APIs and module_platform_driver   Thierry Reding
• [PATCH 08/17] ASoC: Tegra I2S: Use devm_ APIs and module_platform_driver   Thierry Reding
• [PATCH 11/17] ASoC: Tegra I2S: Add device tree binding   Thierry Reding
• [PATCH 12/17] ASoC: Tegra+WM8903 machine: Use devm_ APIs and module_platform_driver   Thierry Reding
• [PATCH 13/17] ASoC: Tegra TrimSlice machine: Use devm_ APIs and module_platform_driver   Thierry Reding
• [PATCH 17/17] ASoC: Tegra+WM8903 machine: Add device tree binding   Thierry Reding
• [PATCH v2] video: support MIPI-DSI controller driver   Florian Tobias Schandinat
• [PATCH V3 2/6] ARM: s5p: remove useless churn in sleep.S   amit kachhap
• wake up from sleep on s3c2416   GIGIN JOSE
• [PATCH] IMX/SDMA : save the real count for one DMA transaction.   Huang Shijie
• AW: [PATCH v5 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   Carsten Behling
• [PATCH 1/4] ARM: PL330: Don't call the callbacks if there isn't any active transfer   Javi Merino
• [PATCH] arm/tegra: Fix build error with tegra_assert_system_reset   Russell King - ARM Linux
• [PATCH 0/7] Introducing a generic AMP framework   Ohad Ben-Cohen
• [PATCH v2 1/2] MX2: Add platform definitions for eMMa-PrP device.   javier Martin
• [PATCH 04/17] ASoC: Add device tree binding for WM8903   Mark Brown
• [PATCH] ARM: Add TLB flushing for both entries in a PMD   Changhwan Youn
• [PATCH 07/17] ASoC: Tegra DAS: Use devm_ APIs and module_platform_driver   Mark Brown
• [PATCH 05/17] ASoC: Tegra: Move DAS configuration into machine drivers   Mark Brown
• [PATCH 06/17] ASoC: Tegra PCM: Use module_platform_driver   Mark Brown
• [PATCH 07/17] ASoC: Tegra DAS: Use devm_ APIs and module_platform_driver   Mark Brown
• [PATCH 08/17] ASoC: Tegra I2S: Use devm_ APIs and module_platform_driver   Mark Brown
• [PATCH 0/7] Introducing a generic AMP framework   Ohad Ben-Cohen
• [PATCH v5 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   Voss, Nikolaus
• [PATCH v2 2/2] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   javier Martin
• [PATCH 01/17] arm/tegra: board-dt: audio: Enable clocks, fix AUXDATA   Mark Brown
• [PATCH] ARM: Add TLB flushing for both entries in a PMD   Catalin Marinas
• [PATCH v2 1/5] dmaengine: add ep93xx DMA support   Vinod Koul
• [PATCH 11/17] ASoC: Tegra I2S: Add device tree binding   Mark Brown
• [PATCH v2 1/2] MX2: Add platform definitions for eMMa-PrP device.   javier Martin
• [PATCH] arm/imx: use Kconfig choice for low-level debug UART selection   Will Deacon
• [PATCH 11/17] ASoC: Tegra I2S: Add device tree binding   Thierry Reding
• [PATCH] IMX/SDMA : save the real count for one DMA transaction.   Wolfram Sang
• [PATCH 09/17] ASoC: Tegra I2S: Remove dependency on pdev->id   Mark Brown
• [PATCH] ARM: tegra: remove declaration of tegra_assert_system_reset in board.h   Axel Lin
• [PATCH] IMX/SDMA : save the real count for one DMA transaction.   Huang Shijie
• [PATCH] IMX/SDMA : save the real count for one DMA transaction.   Wolfram Sang
• [PATCH 10/17] ASoC: Tegra DAS: Add device tree binding   Mark Brown
• [PATCH 12/17] ASoC: Tegra+WM8903 machine: Use devm_ APIs and module_platform_driver   Mark Brown
• [PATCH 13/17] ASoC: Tegra TrimSlice machine: Use devm_ APIs and module_platform_driver   Mark Brown
• [RFC V1 0/8] imx5 clock port to Mike's clkv3   Richard Zhao
• [PATCH] IMX/SDMA : save the real count for one DMA transaction.   Huang Shijie
• [PATCH 14/17] ASoC: Implement "auto nc pins" feature   Mark Brown
• [PATCH] IMX/SDMA : save the real count for one DMA transaction.   Wolfram Sang
• [PATCH 17/17] ASoC: Tegra+WM8903 machine: Add device tree binding   Mark Brown
• [PATCH 11/17] ASoC: Tegra I2S: Add device tree binding   Mark Brown
• [PATCH] IMX/SDMA : save the real count for one DMA transaction.   Huang Shijie
• BUG: sleeping function called from invalid context   Peter Rusko
• [PATCH] IMX/SDMA : save the real count for one DMA transaction.   Wolfram Sang
• [PATCH] IMX/SDMA : save the real count for one DMA transaction.   Vinod Koul
• [PATCH v7 0/2] iommu/exynos: Add IOMMU/System MMU driver for Samsung Exynos   Joerg Roedel
• [PATCH 2/4] ARM: extract out insn generation code from ftrace   Dave Martin
• -next fails to boot as of today on S3C6410   Mark Brown
• -next fails to boot as of today on S3C6410   Jamie Iles
• [PATCH v8 24/24] gpio/omap: handle set_dataout reg capable IP on restore   DebBarma, Tarun Kanti
• [PATCH v2 2/2] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   javier Martin
• [PATCH] ARM: OMAP: dmtimer: fix missing content/correction in low-power mode support   DebBarma, Tarun Kanti
• BUG: sleeping function called from invalid context   Fabio Estevam
• -next fails to boot as of today on S3C6410   Mark Brown
• BUG: sleeping function called from invalid context   Fabio Estevam
• [PATCH v2 2/2] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   Fabio Estevam
• [PATCH v2 2/2] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   Sascha Hauer
• bug of gpio transition in pinmux driver   Haojian Zhuang
• -next fails to boot as of today on S3C6410   Jamie Iles
• -next fails to boot as of today on S3C6410   Mark Brown
• Porting the 2.6.38 linux kernel to ARM11 MPcore   Molnár Gábor
• AW: [PATCH v5 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   Carsten Behling
• [PATCH] ARM: mach-orion5x: Use hex2bin that is present in kernel lib   plaes at plaes.org
• Porting the 2.6.38 linux kernel to ARM11 MPcore   Catalin Marinas
• -next fails to boot as of today on S3C6410   Jamie Iles
• [PATCH v5 3/4] drivers/i2c/busses/i2c-at91.c: add new driver   Voss, Nikolaus
• [AT91 PULL] defconfig pullrequest   Nicolas Ferre
• [PATCH] ASoC: skip resume of soc-audio devices without codecs   Eric Miao
• [PATCH] ARM: Add optimised swahb32() byteswap helper for v6 and above   Dave Martin
• [PATCH 1/4] ARM: ftrace: use canonical Thumb-2 wide instruction format   Dave Martin
• [PATCH 4/4] ARM: add jump label support   Rabin Vincent
• -next fails to boot as of today on S3C6410   Mark Brown
• HW perf initialisation as early_initcall   Will Deacon
• [PATCH] ASoC: skip resume of soc-audio devices without codecs   Mark Brown
• [PATCH] ASoC: skip resume of soc-audio devices without codecs   Mark Brown
• [PATCH v2 0/4] Versatile Express DT support   Pawel Moll
• [PATCH v2 1/4] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [PATCH v2 2/4] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [PATCH v2 3/4] ARM: vexpress: Initial RS1 memory map support   Pawel Moll
• [PATCH v2 4/4] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Pawel Moll
• HW perf initialisation as early_initcall   Peter Zijlstra
• [PATCH v3 0/2] Add support form eMMa-PrP in i.MX2 chips as a mem2mem device.   Javier Martin
• [PATCH v3 1/2] MX2: Add platform definitions for eMMa-PrP device.   Javier Martin
• [PATCH v3 2/2] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   Javier Martin
• [PATCH] ASoC: skip resume of soc-audio devices without codecs   Eric Miao
• [PATCH v3 2/2] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   Fabio Estevam
• [PATCH v3 2/2] MEM2MEM: Add support for eMMa-PrP mem2mem operations.   javier Martin
• [PATCH] ARM: vic: register the VIC for ST-modified VIC's   Jamie Iles
• HW perf initialisation as early_initcall   Will Deacon
• [PATCH 1/7] amp/remoteproc: add framework for controlling remote processors   Ohad Ben-Cohen
• [PATCH] ARM: vic: register the VIC for ST-modified VIC's   Linus Walleij
• [PATCH] ARM: vic: register the VIC for ST-modified VIC's   Jamie Iles
• [PATCH] ARM: vic: register the VIC for ST-modified VIC's   Linus Walleij
• HW perf initialisation as early_initcall   Peter Zijlstra
• [PATCH] ARM: Add optimised swahb32() byteswap helper for v6 and above   Nicolas Pitre
• [PATCH 0/7] Introducing a generic AMP framework   Mark Brown
• [PATCH v2 2/4] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [PATCH v7 3/5] drivers/i2c/busses/i2c-at91.c: add new driver   Arnd Bergmann
• [RFC PATCH 2/2] modpost: use config and ELF sections to build file2alias   Dave Martin
• [PATCH v3 1/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
• [PATCH v3 2/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
• [PATCH 03/17] arm/dt: Tegra: Enable audio on WM8903 boards, disable others   Stephen Warren
• [RFC PATCH 2/2] modpost: use config and ELF sections to build file2alias   Alessandro Rubini
• [PATCH] ARM: tegra: remove declaration of tegra_assert_system_reset in board.h   Stephen Warren
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Tony Lindgren
• [PATCH] arm/tegra: Fix build error with tegra_assert_system_reset   Stephen Warren
• [AT91 PULL] ioremap pull request for 3.3   Jean-Christophe PLAGNIOL-VILLARD
• bug of gpio transition in pinmux driver   Stephen Warren
• [RFC PATCH 2/2] modpost: use config and ELF sections to build file2alias   Dave Martin
• [AT91 PULL] gpio cleanup pull request for 3.3   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] arm/tegra: convert tegra20 to GIC devicetree binding   Stephen Warren
• bug of gpio transition in pinmux driver   Haojian Zhuang
• [alsa-devel] [PATCH 07/17] ASoC: Tegra DAS: Use devm_ APIs and module_platform_driver   Stephen Warren
• [PATCH 01/17] arm/tegra: board-dt: audio: Enable clocks, fix AUXDATA   Stephen Warren
• [PATCH v5 6/7] arm: omap4: support pmu   Rabin Vincent
• Porting the 2.6.38 linux kernel to ARM11 MPcore   Arnd Bergmann
• Porting the 2.6.38 linux kernel to ARM11 MPcore   Russell King - ARM Linux
• -next fails to boot as of today on S3C6410   Rob Herring
• [PATCH 4/4] ARM: add jump label support   Russell King - ARM Linux
• [PATCH 09/17] ASoC: Tegra I2S: Remove dependency on pdev->id   Stephen Warren
• -next fails to boot as of today on S3C6410   Mark Brown
• [PATCH 09/17] ASoC: Tegra I2S: Remove dependency on pdev->id   Mark Brown
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Russell King - ARM Linux
• [PATCH resend] arm: s3c24xx: Add new LCD (W35i) support for Mini2440 board   Denis Kuzmenko
• BUG: sleeping function called from invalid context   Uwe Kleine-König
• [PATCH v5 4/4] regulator: map consumer regulator based on device tree   Mark Brown
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Tony Lindgren
• [PATCH v5 0/4] Device tree support for regulators   Mark Brown
• -next fails to boot as of today on S3C6410   Nicolas Pitre
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Mark Brown
• [PATCH] arm: dma: Drop GFP_COMP for DMA memory allocations   Stephen Warren
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Tony Lindgren
• [PATCH v3 1/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Dmitry Artamonow
• [PATCH v8 24/24] gpio/omap: handle set_dataout reg capable IP on restore   Kevin Hilman
• [PATCH/RESEND #3 1/7] OMAP3+: PM: SR: add suspend/resume handlers   Kevin Hilman
• [PATCH 0/7] Introducing a generic AMP framework   Saravana Kannan
• [PATCH v3 2/5] Documentation: common clk API   Turquette, Mike
• [alsa-devel] [PATCH 07/17] ASoC: Tegra DAS: Use devm_ APIs and module_platform_driver   Thierry Reding
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Turquette, Mike
• [PATCH v3 1/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
• [GIT PULL] Support for Cadence GEM in the MACB driver   Arnd Bergmann
• [GIT PULL] ARM: pxa: change gpio to platform driver   Arnd Bergmann
• [AT91 PULL] defconfig pullrequest   Arnd Bergmann
• [GIT PULL v2] pxa: fixes for v3.2-rc1   Arnd Bergmann
• [GIT PULL] Samsung fixes for v3.2   Arnd Bergmann
• [GIT PULL] i.MXf fixes/cleanups   Arnd Bergmann
• [GIT PULL] Missing CPU mapping updates   Arnd Bergmann
• [GIT PULL] mxs: fixes for v3.2-rc   Arnd Bergmann
• [GIT PULL] omap fixes for v3.2-rc2   Arnd Bergmann
• [GIT PULL] imx6q: fix for v3.2-rc   Arnd Bergmann
• [GIT PULL] mx5 merge   Arnd Bergmann
• [PATCH v3 3/5] clk: introduce the common clock framework   Turquette, Mike
• [PATCH 01/17] arm/tegra: board-dt: audio: Enable clocks, fix AUXDATA   Olof Johansson
• [GIT PULL] omap fixes for v3.2-rc2   Tony Lindgren
• [RFC V1 1/8] clk: support static parent   Mike Turquette
• [RFC V1 2/8] clk: pass parent rate if recalc_rate is NULL   Mike Turquette
• [GIT PULL] omap fixes for v3.2-rc2   Arnd Bergmann
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Russell King - ARM Linux
• [PATCH v3 1/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Philipp Zabel
• [PATCH v3 1/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Philipp Zabel
• BUG: sleeping function called from invalid context   Russell King - ARM Linux
• [PATCH v3 1/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Russell King - ARM Linux
• [PATCH v3 1/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Philipp Zabel
• [GIT PULL] omap fixes for v3.2-rc2   Tony Lindgren
• [PATCH v7 0/5] AT91: replace broken TWI driver i2c-at91.c   Ben Dooks
• [PATCH] arm: dma: Drop GFP_COMP for DMA memory allocations   Russell King - ARM Linux
• [GIT PULL] omap fixes for v3.2-rc2, take 2   Tony Lindgren
• [GIT PULL] DSS fixes for v3.2-rc2   Tony Lindgren
• [GIT PULL v2] pxa: fixes for v3.2-rc1   Eric Miao
• [RFC V1 1/8] clk: support static parent   Richard Zhao
• -next fails to boot as of today on S3C6410   Nicolas Pitre
• [GIT PULL] omap fixes for v3.2-rc2   Tony Lindgren
• [RFC V1 2/8] clk: pass parent rate if recalc_rate is NULL   Richard Zhao
• [GIT PULL] imx6q: fix for v3.2-rc   Richard Zhao
• [PATCH v3 1/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
• [PATCH v3 5/5] clk: export tree topology and clk data via sysfs   Tony Lindgren
• [GIT PULL] Samsung fixes for v3.2   MyungJoo Ham
• [PATCH] IMX/SDMA : save the real count for one DMA transaction.   Huang Shijie
• [PATCH v3 1/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
• [PATCH] IMX/SDMA : save the real count for one DMA transaction.   Huang Shijie
• [RFC PATCH 0/3] Convert imx6 clock to device tree   Shawn Guo
• [PATCH V3 3/6] MTD : add the database for the NANDs   Huang Shijie
• [RFC PATCH 1/3] arm/imx6: describe clocks in device tree source   Shawn Guo
• [PATCH V3 1/6] ARM: exynos: Add AFTR mode cpuidle state on EXYNOS4210   Inderpal Singh
• Onenand flash request_mem_region() fails with ERROR -16   Tiju Jacob
• [RFC V1 0/8] imx5 clock port to Mike's clkv3   Shawn Guo
• [PATCH v8 24/24] gpio/omap: handle set_dataout reg capable IP on restore   DebBarma, Tarun Kanti
• [PATCH] ASoC: skip resume of soc-audio devices without codecs   Eric Miao
• [GIT PULL] mxs: fixes for v3.2-rc   Shawn Guo
• BUG: sleeping function called from invalid context   Shawn Guo
• [PATCH v7 0/5] AT91: replace broken TWI driver i2c-at91.c   Voss, Nikolaus
• [PATCH] ARM: imx: drop 'ARCH_MX31' and 'ARCH_MX35'   Shawn Guo
• [PATCH] ARM: mach-orion5x: Use hex2bin that is present in kernel lib   Lennert Buytenhek
• [PATCH 14/41] ARM: restart: iop3xx: use new restart hook   Lennert Buytenhek
• [PATCH 15/41] ARM: restart: iop13xx: use new restart hook   Lennert Buytenhek
• [PATCH 16/41] ARM: restart: ixp2000: use new restart hook   Lennert Buytenhek
• [PATCH 17/41] ARM: restart: ixp23xx: use new restart hook   Lennert Buytenhek
• [PATCH 6/7] ARM: restart: only perform setup for restart when soft-restarting   Lennert Buytenhek
• [PATCH] ARM: SAMSUNG: Add s3c_setparent_clksrc in s3c_set_clksrc   jhbird.choi at samsung.com
• BUG: sleeping function called from invalid context   Uwe Kleine-König
• [PATCH 1/4] ARM: ftrace: use canonical Thumb-2 wide instruction format   Bi Junxiao
• [GIT PULL] mx5 merge   Sascha Hauer
• [PATCH v2 1/1] ASoC: mxs-saif: remove function in platform_data   Shawn Guo
• [PATCH v7 0/3] ARM: mxs: add recording support for saif   Shawn Guo
• [PATCH v7 0/3] ARM: mxs: add recording support for saif   Uwe Kleine-König
• [PATCH v7 0/3] ARM: mxs: add recording support for saif   Shawn Guo
• [PATCH v7 0/3] ARM: mxs: add recording support for saif   Wolfram Sang
• [PATCH] i2c-mxs: fix compile warning in mxs_i2c_xfer()   Shawn Guo
• [PATCH] i2c-mxs: fix compile warning in mxs_i2c_xfer()   Wolfram Sang
• [RFC PATCH 1/3] arm/imx6: describe clocks in device tree source   Sascha Hauer
• [PATCH v7 0/3] ARM: mxs: add recording support for saif   Shawn Guo
• [PATCH] ARM: Kota2 mach-type update fix   Paul Mundt
• [PATCH] i2c-mxs: fix compile warning in mxs_i2c_xfer()   Shawn Guo
• [PATCH] i2c-mxs: fix compile warning in mxs_i2c_xfer()   Uwe Kleine-König
• [PATCH] i2c-mxs: fix compile warning in mxs_i2c_xfer()   Wolfram Sang
• [PATCH 0/7] Introducing a generic AMP framework   Ohad Ben-Cohen
• [RFC PATCH 0/3] Convert imx6 clock to device tree   Sascha Hauer
• BUG: sleeping function called from invalid context   Russell King - ARM Linux
• [PATCH] i2c-mxs: fix compile warning in mxs_i2c_xfer()   Dong Aisheng-B29396
• BUG: sleeping function called from invalid context   Uwe Kleine-König
• [PATCH] i2c-mxs: fix compile warning in mxs_i2c_xfer()   Uwe Kleine-König
• [PATCH] i2c-mxs: fix compile warning in mxs_i2c_xfer()   Dong Aisheng-B29396
• [PATCH] i2c-mxs: fix compile warning in mxs_i2c_xfer()   Lothar Waßmann
• [PATCH] ARM: Kota2 mach-type update fix   Kuninori Morimoto
• [PATCH] ARM: mach-orion5x: Use hex2bin that is present in kernel lib   plaes at plaes.org
• bug of gpio transition in pinmux driver   Linus Walleij
• [RFC V1 0/8] imx5 clock port to Mike's clkv3   Richard Zhao
• BUG: sleeping function called from invalid context   Russell King - ARM Linux
• [PATCH v7 3/5] drivers/i2c/busses/i2c-at91.c: add new driver   Voss, Nikolaus
• [PATCH] ARM: Kota2 mach-type update fix   Russell King - ARM Linux
• [PATCH v7 0/3] ARM: mxs: add recording support for saif   Wolfram Sang
• [AT91 PULL] defconfig pullrequest   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mfd: Fixed unconditional reset of the ADC reading enable bits   Robin van der Gracht
• [PATCH] mfd: fixed mixed up ADC single channel readout   Robin van der Gracht
• [PATCH] ARM: vic: register the VIC for ST-modified VIC's   Jamie Iles
• [PATCH v9] AT91: Add a driver for the ADC   Maxime Ripard
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH] mx28: added LRADC and touchscreen support   Peter Rusko
• -next fails to boot as of today on S3C6410   Mark Brown
• [RFC PATCH 0/3] Convert imx6 clock to device tree   Shawn Guo
• [PATCH] ARM: Handle empty maps in iotable_init()   Mark Brown
• Changing IOMMU-API for generic DMA-mapping supported by the hardware   Marek Szyprowski
• -next fails to boot as of today on S3C6410   Mark Brown
• [PATCH] mx28: added LRADC and touchscreen support   Shawn Guo
• [GIT PULL] mxs: patch for v3.2   Shawn Guo
• bug of gpio transition in pinmux driver   Haojian Zhuang
• [PATCH] mx28: added LRADC and touchscreen support   Lothar Waßmann
• [PATCH 1/3] ARM: at91: rename defconfig files appropriately   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ARM: at91: refresh soc defconfig files for 3.2   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] ARM: at91: enable additional boards in existing soc defconfig files   Jean-Christophe PLAGNIOL-VILLARD
• BUG: sleeping function called from invalid context   Uwe Kleine-König
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] mfd: Fixed unconditional reset of the ADC reading enable bits   Uwe Kleine-König
• [PATCH] mfd: fixed mixed up ADC single channel readout   Uwe Kleine-König
• [PATCH] mx28: added LRADC and touchscreen support   Fabio Estevam
• [AT91 PULL v2] defconfig pullrequest   Jean-Christophe PLAGNIOL-VILLARD
• [GIT PULL] mxs: patch for v3.2   Arnd Bergmann
• [AT91 PULL v2] defconfig pull request   Arnd Bergmann
• [PATCH] mx28: added LRADC and touchscreen support   Fabio Estevam
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Fabio Estevam
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• Changing IOMMU-API for generic DMA-mapping supported by the hardware   'Joerg Roedel'
• [PATCH v7 3/5] drivers/i2c/busses/i2c-at91.c: add new driver   Arnd Bergmann
• [PATCH] mx28: added LRADC and touchscreen support   Peter Rusko
• [GIT PULL] omap fixes for v3.2-rc2, take 2   Arnd Bergmann
• [PATCH] ARM : fix /proc/interrupts per online cpu   Daniel Lezcano
• [GIT PULL] DSS fixes for v3.2-rc2   Arnd Bergmann
• -next fails to boot as of today on S3C6410   Mark Brown
• [PATCH 2/4] ARM: extract out insn generation code from ftrace   Rabin Vincent
• cpu_pm breaks 3.2 boot on platforms with cascading GICs   Will Deacon
• GIC irq_start detection breaks 3.2 boot on platforms without PPIs   Will Deacon
• [PATCH v7 3/5] drivers/i2c/busses/i2c-at91.c: add new driver   Voss, Nikolaus
• cpu_pm breaks 3.2 boot on platforms with cascading GICs   Marc Zyngier
• [PATCH v7 3/5] drivers/i2c/busses/i2c-at91.c: add new driver   Arnd Bergmann
• cpu_pm breaks 3.2 boot on platforms with cascading GICs   Will Deacon
• -next fails to boot as of today on S3C6410   Nicolas Pitre
• -next fails to boot as of today on S3C6410   Mark Brown
• [PATCH RESEND] davinci: dm646x: move vpif related code to driver core header from platform   Mauro Carvalho Chehab
• [PATCH RESEND] davinci: dm646x: move vpif related code to driver core header from platform   Nori, Sekhar
• -next fails to boot as of today on S3C6410   Nicolas Pitre
• -next fails to boot as of today on S3C6410   Mark Brown
• -next fails to boot as of today on S3C6410   Nicolas Pitre
• -next fails to boot as of today on S3C6410   Nicolas Pitre
• [PATCH v5] power: bq20z75: devicetree init support   Anton Vorontsov
• -next fails to boot as of today on S3C6410   Mark Brown
• [PATCH 4/4] [RFC] Use generic ARM instruction set condition code checks for kprobes.   Tixy
• [GIT PULL] DSS fixes for v3.2-rc2   Tony Lindgren
• [PATCH RESEND] davinci: dm646x: move vpif related code to driver core header from platform   Mauro Carvalho Chehab
• [PATCH] ARM : fix /proc/interrupts per online cpu   Russell King - ARM Linux
• [PATCH 06/41] ARM: restart: cns3xxx: use new restart hook   Russell King - ARM Linux
• [PATCH 23/41] ARM: restart: mxc: use new restart hook   Russell King - ARM Linux
• [PATCH 33/41] ARM: restart: spear: use new restart hook   Russell King - ARM Linux
• [PATCH] arm/tegra: Fix build error with tegra_assert_system_reset   Russell King - ARM Linux
• [PATCH] ARM: w90x900: add common nuc9xx.h   Russell King - ARM Linux
• [PATCH 06/41] ARM: restart: cns3xxx: use new restart hook   Anton Vorontsov
• [PATCH] mx28: added LRADC and touchscreen support   Russell King - ARM Linux
• [PATCH] mx28: added LRADC and touchscreen support   Russell King - ARM Linux
• [PATCH] at91_ether: use gpio_is_valid for phy IRQ line   Nicolas Ferre
• [PATCH] ARM: OMAP: Add support for AM35xx UART4/ttyO3   Paul Walmsley
• [PATCH 1/3] ARM: at91/aic: add device tree support for AIC   Nicolas Ferre
• [PATCH 2/3] ARM: at91/gpio: add irqdomain to gpio interrupts   Nicolas Ferre
• [PATCH 3/3] ARM: at91/board-dt: remove AIC irq domain from board file   Nicolas Ferre
• [PATCH 22/41] ARM: restart: mv78xx0: use new restart hook   Nicolas Pitre
• [PATCH 25/41] ARM: restart: orion5x: use new restart hook   Nicolas Pitre
• [PATCH 07/41] ARM: restart: dove: use new restart hook   Nicolas Pitre
• [PATCH v7 0/5] AT91: replace broken TWI driver i2c-at91.c   Ryan Mallon
• [PATCH] ARM: sa1100: collie: Remove irq_to_gpio from power driver   Anton Vorontsov
• [PATCH 1/3] ARM: at91/aic: add device tree support for AIC   Jamie Iles
• [PATCH] at91_ether: use gpio_is_valid for phy IRQ line   Jamie Iles
• [PATCH] ARM : fix /proc/interrupts per online cpu   Daniel Lezcano
• [PATCH] mx28: added LRADC and touchscreen support   Shawn Guo
• [PATCH v5 6/7] arm: omap4: support pmu   Ming Lei
• [PATCH] i2c-mxs: fix compile warning in mxs_i2c_xfer()   Shawn Guo
• [PATCH v4 1/2] pxa/hx4700: Add Synaptics NavPoint (PXA27x SSP/SPI) driver   Paul Parsons
• [PATCH] ARM: fix $(CROSS_COMPILE) prefix missing from size invocation   Janusz Krzysztofik
• [PATCH] ARM: w90x900: add common nuc9xx.h   Wan ZongShun
• [PATCH 33/41] ARM: restart: spear: use new restart hook   Viresh Kumar
• [PATCH V3 1/6] ARM: exynos: Add AFTR mode cpuidle state on EXYNOS4210   amit kachhap
• [PATCH V3 0/6] ARM: exynos: Add l2 retention mode cpuidle state   amit kachhap
• [PATCH 0/2] ARM: OMAP: dmtimer: scheduling while atomic fixes   Omar Ramirez Luna
• [PATCH 1/2] ARM: OMAP: dmtimer: fix sleeping function called from invalid context   Omar Ramirez Luna
• [PATCH 2/2] ARM: OMAP: dmtimer: reorganize omap_dm_timer_request_*   Omar Ramirez Luna
• [PATCH v2] PM: HIBERNATION: skip the swap size check if the snapshot image size is anticipative   Barry Song
• [PATCH] ARM: Add TLB flushing for both entries in a PMD   Changhwan Youn
• [PATCH] i2c-mxs: fix compile warning in mxs_i2c_xfer()   Wolfram Sang
• [PATCH 1/4] ARM: ftrace: use canonical Thumb-2 wide instruction format   Dave Martin
• [PATCH] ARM: Add optimised swahb32() byteswap helper for v6 and above   Dave Martin
• [PATCH] ARM: Add TLB flushing for both entries in a PMD   Catalin Marinas
• [PATCH v2] PM: HIBERNATION: skip the swap size check if the snapshot image size is anticipative   Matthieu CASTET
• [PATCH v8 00/24] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [V1 1/3] RTC: sa1100: Clean out ost register   Jett.Zhou
• [V1 1/3] RTC: sa1100: Clean out ost register   Jett.Zhou
• [V1 2/3] RTC: sa1100: remove redundant code of setting alarm   Jett.Zhou
• [V1 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Jett.Zhou
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Dave Martin
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Dave Martin
• Porting the 2.6.38 linux kernel to ARM11 MPcore   Molnár Gábor
• Porting the 2.6.38 linux kernel to ARM11 MPcore   Molnár Gábor
• [PATCH 23/41] ARM: restart: mxc: use new restart hook   Sascha Hauer
• [PATCH 4/4] [RFC] Use generic ARM instruction set condition code checks for kprobes.   Leif Lindholm
• [PATCH v2] PM: HIBERNATION: skip the swap size check if the snapshot image size is anticipative   Barry Song
• [PATCH] at91_ether: use gpio_is_valid for phy IRQ line   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/3] ARM: at91/aic: add device tree support for AIC   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91_ether: use gpio_is_valid for phy IRQ line   Nicolas Ferre
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Dave Airlie
• [V1 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Arnd Bergmann
• GIC irq_start detection breaks 3.2 boot on platforms without PPIs   Rob Herring
• USB Serial Gadget regression on pxa27x-udc   Paul Parsons
• [PATCH 1/3] ARM: at91/aic: add device tree support for AIC   Jamie Iles
• [PATCH 2/3] ARM: at91/gpio: add irqdomain to gpio interrupts   Rob Herring
• GIC irq_start detection breaks 3.2 boot on platforms without PPIs   Will Deacon
• [PATCH v7 0/5] AT91: replace broken TWI driver i2c-at91.c   Hubert Feurstein
• [PATCH] mx28: added LRADC and touchscreen support   Arnd Bergmann
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Daniel Vetter
• [PATCH v2 1/4] ARM: vexpress: Get rid of MMIO_P2V   Dave Martin
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Dave Airlie
• [PATCH v2 2/4] ARM: vexpress: Add DT support in v2m   Dave Martin
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Dave Airlie
• [PATCH] mm: cma: hack/workaround for some allocation issues   Marek Szyprowski
• [V1 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Haojian Zhuang
• [PATCH 0/4] Add generic ARM ISA condition code checks   Leif Lindholm
• [PATCH 1/4] Add generic ARM instruction set condition code checks.   Leif Lindholm
• [V1 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Arnd Bergmann
• [PATCH 2/4] Use generic ARM instruction set condition code checks for nwfpe.   Leif Lindholm
• [PATCH 3/4] Add condition code checking to SWP emulation handler.   Leif Lindholm
• [PATCH 4/4] Use generic ARM instruction set condition code checks for kprobes.   Leif Lindholm
• [PATCH 1/4] Add generic ARM instruction set condition code checks.   Dave Martin
• [PATCH] ARM: S3C64xx: Power gate unused domains   Mark Brown
• [V1 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Alessandro Zummo
• [PATCH v2 3/4] mmc: sdhci-pxa: Add SDHCI driver for PXA16x   Philip Rakity
• [V1 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Robert Jarzmik
• [PATCH] mm: cma: hack/workaround for some allocation issues   Michal Nazarewicz
• [PATCH 13/41] ARM: restart: integrator: use new restart hook   Linus Walleij
• [PATCH 41/41] ARM: restart: remove the now empty arch_reset()   Linus Walleij
• USB Serial Gadget regression on pxa27x-udc   Robert Jarzmik
• [PATCH 0/7] pinctrl: enable pxa pinmux   Haojian Zhuang
• [PATCH 1/7] pinctrl: enable pxa3xx pinmux   Haojian Zhuang
• [PATCH 2/7] gpio: make pxa gpio depend on pinmux   Haojian Zhuang
• [PATCH 3/7] ARM: pxa: enable pinmux in pxa pwm   Haojian Zhuang
• [PATCH 4/7] tty: serial: support pinmux in pxa serial   Haojian Zhuang
• [PATCH 5/7] fb: pxa: support pinmux operation   Haojian Zhuang
• [PATCH 6/7] ARM: pxa: enable pinmux mapping in zylonite   Haojian Zhuang
• [PATCH 7/7] ARM: mmp: enable pinmux on ttc dkb   Haojian Zhuang
• USB Serial Gadget regression on pxa27x-udc   Paul Parsons
• [PATCH v3 1/5] clk: Kconfig: add entry for HAVE_CLK_PREPARE   Shawn Guo
• [PATCH v6 0/3] OMAP4: support PMU   ming.lei at canonical.com
• [PATCH v6 1/3] arm: omap4: create pmu device via hwmod   ming.lei at canonical.com
• [PATCH v6 2/3] arm: omap4: support pmu   ming.lei at canonical.com
• [PATCH v6 3/3] arm: omap4: pmu: support runtime pm   ming.lei at canonical.com
• [PATCH 6/7] ARM: pxa: enable pinmux mapping in zylonite   Arnd Bergmann
• [PATCH 0/3] OMAP4&drivers/misc: introduce face detection module driver   tom.leiming at gmail.com
• [PATCH 1/3] omap4: introduce fdif(face detect module) hwmod   tom.leiming at gmail.com
• [PATCH 2/3] omap4: build fdif omap device from hwmod   tom.leiming at gmail.com
• [PATCH 3/3] drivers/misc: introduce face detection module driver(fdif)   tom.leiming at gmail.com
• [PATCH 6/7] ARM: pxa: enable pinmux mapping in zylonite   Haojian Zhuang
• [PATCH v3 0/5] common clk framework   Shawn Guo
• [PATCH v3 2/5] Documentation: common clk API   Shawn Guo
• [PATCH] arm: mx23: recognise stmp378x as mx23   Wolfram Sang
• [PATCH 3/3] drivers/misc: introduce face detection module driver(fdif)   Alan Cox
• [PATCH v3 3/5] clk: introduce the common clock framework   Shawn Guo
• [PATCH v3 4/5] clk: basic gateable and fixed-rate clks   Shawn Guo
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Daniel Vetter
• [PATCH 3/3] drivers/misc: introduce face detection module driver(fdif)   Greg KH
• [V1 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Alessandro Zummo
• -next fails to boot as of today on S3C6410   Russell King - ARM Linux
• GIC irq_start detection breaks 3.2 boot on platforms without PPIs   Russell King - ARM Linux
• [PATCH 3/3] drivers/misc: introduce face detection module driver(fdif)   Sylwester Nawrocki
• [PATCH 1/1 v5] arm: fault.c: Port OOM changes into do_page_fault   Russell King - ARM Linux
• [PATCH v3 4/5] clk: basic gateable and fixed-rate clks   Shawn Guo
• -next fails to boot as of today on S3C6410   Nicolas Pitre
• [PATCH v3 0/5] common clk framework   Turquette, Mike
• [PATCH v3 2/5] Documentation: common clk API   Turquette, Mike
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Paul Walmsley
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Paul Walmsley
• [PATCH 0/5] ARM: OMAP1: Fix dpll1 reprogramming related issues   Janusz Krzysztofik
• [PATCH 1/5] ARM: OMAP1: Fix dpll1 default rate reprogramming method   Janusz Krzysztofik
• [PATCH 2/5] ARM: OMAP1: Fix ckctl value used for dpll1 defualt rate   Janusz Krzysztofik
• [PATCH 3/5] ARM: OMAP1: Fix dpll1 reprogramming not actually allowed   Janusz Krzysztofik
• [PATCH 4/5] init/calibrate.c: allow for recalibration of loops per jiffy   Janusz Krzysztofik
• [PATCH 5/5] ARM: OMAP1: recalibrate loops per jiffy after dpll1 reprogram   Janusz Krzysztofik
• [PATCH v2 0/4] OMAP serial device tree support   Greg KH
• [PATCH 3/3] drivers/misc: introduce face detection module driver(fdif)   Ming Lei
• [PATCH 03/62] arm: remove the second argument of k[un]map_atomic()   Cong Wang
• [PATCH 20/62] mmc: remove the second argument of k[un]map_atomic()   Cong Wang
• [PATCH 61/62] highmem: kill all __kmap_atomic()   Cong Wang
• [PATCH 1/1 v5] arm: fault.c: Port OOM changes into do_page_fault   Kautuk Consul
• [PATCH v3 3/5] clk: introduce the common clock framework   Turquette, Mike
• [PATCH v3 4/5] clk: basic gateable and fixed-rate clks   Turquette, Mike
• [Linaro-mm-sig] [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanism   Rob Clark
• [PATCH] ASoC: skip resume of soc-audio devices without codecs   Mark Brown
• [PATCH] mx28: added LRADC and touchscreen support   Jonathan Cameron
• [PATCH] ARM: kprobes: Change testcase with unpredictable STRD instruction   Tixy
• [PATCH] ARM: kprobes: Restrict probing SWP instructions to ARMv5 and below   Tixy
• [PATCH 4/4] Use generic ARM instruction set condition code checks for kprobes.   Tixy
• [PATCH 1/1 v5] arm: fault.c: Port OOM changes into do_page_fault   Will Deacon
• GIC irq_start detection breaks 3.2 boot on platforms without PPIs   Will Deacon
• [PATCH 3/3] drivers/misc: introduce face detection module driver(fdif)   Sylwester Nawrocki
• [PATCH] s3c24xx: cpufreq: Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Denis Kuzmenko
• [PATCH 1/2] ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus.   Jochen Friedrich
• [PATCH 2/2] ARM: sa1100: Refactor mcp-sa11x0 to use platform resources.   Jochen Friedrich
• [PATCH 20/62] mmc: remove the second argument of k[un]map_atomic()   Guennadi Liakhovetski
• [PATCH] ARM: S3C64XX: Remove extern from definition of framebuffer setup call   Mark Brown
• [RESEND PATCH] ARM: SAMSUNG: Add s3c_setparent_clksrc in s3c_set_clksrc   jhbird.choi at samsung.com
• [V1 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Haojian Zhuang
• [V2 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Jett.Zhou
• [V2 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Jett.Zhou
• No subject   Jett.Zhou
• Want to Get Suggestion for MX28 USB Submisson   Chen Peter-B29397
• [PATCH 3/3] drivers/misc: introduce face detection module driver(fdif)   Ming Lei
• [PATCH] dma i.MX: remove individual SOC dependency   Vinod Koul
• Want to Get Suggestion for MX28 USB Submisson   Greg KH
• Want to Get Suggestion for MX28 USB Submisson   Chen Peter-B29397
• Want to Get Suggestion for MX28 USB Submisson   Greg KH
• [PATCH v2 0/4] OMAP serial device tree support   Rajendra Nayak
• [PATCH v2 0/4] OMAP serial device tree support   Greg KH
• [PATCH] arm/tegra: Fix build error with tegra_assert_system_reset   Olof Johansson
• Want to Get Suggestion for MX28 USB Submisson   Robert Schwebel
• [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanismch   Marek Szyprowski
• [PATCH 3/3] omap: board-sdp4430: declare support for MMC_PM_KEEP_POWER   Coelho, Luciano
• [PATCH] ARM: EXYNOS: Enable MDMA driver   Boojin Kim
• [PATCH] ARM: Add TLB flushing for both entries in a PMD   Changhwan Youn
• Want to Get Suggestion for MX28 USB Submisson   Chen Peter-B29397
• Want to Get Suggestion for MX28 USB Submisson   Robert Schwebel
• [PATCH v8 00/24] gpio/omap: driver cleanup and fixes   DebBarma, Tarun Kanti
• [PATCH v2] ARM: pl330: Fix a race condition   Boojin Kim
• [PATCH 3/3] omap: board-sdp4430: declare support for MMC_PM_KEEP_POWER   Eliad Peller
• Want to Get Suggestion for MX28 USB Submisson   Chen Peter-B29397
• [PATCH 1/7] pinctrl: enable pxa3xx pinmux   Linus Walleij
• [PATCH 3/3] omap: board-sdp4430: declare support for MMC_PM_KEEP_POWER   Luciano Coelho
• [PATCH 2/7] gpio: make pxa gpio depend on pinmux   Linus Walleij
• [PATCH 2/3] omap_hsmmc: add pm_caps field   Igor Grinberg
• [PATCH 4/7] tty: serial: support pinmux in pxa serial   Linus Walleij
• [PATCH 3/7] ARM: pxa: enable pinmux in pxa pwm   Linus Walleij
• [PATCH 5/7] fb: pxa: support pinmux operation   Linus Walleij
• [PATCH] ARM: fix unwinding for XIP kernels   Uwe Kleine-König
• [PATCH 7/7] ARM: mmp: enable pinmux on ttc dkb   Linus Walleij
• [PATCH 2/3] omap_hsmmc: add pm_caps field   Eliad Peller
• [PATCH 3/3] omap: board-sdp4430: declare support for MMC_PM_KEEP_POWER   Igor Grinberg
• [PATCH 6/7] ARM: pxa: enable pinmux mapping in zylonite   Linus Walleij
• [PATCH] dma i.MX: remove individual SOC dependency   Sascha Hauer
• 2.6.38 port not booting on i.MX53 SoM   Wayne Tams
• Want to Get Suggestion for MX28 USB Submisson   Marc Kleine-Budde
• [PATCH] ARM: fix unwinding for XIP kernels   Catalin Marinas
• [PATCH 1/7] pinctrl: enable pxa3xx pinmux   Haojian Zhuang
• [V2 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Haojian Zhuang
• [V1 1/3] RTC: sa1100: Clean out ost register   Haojian Zhuang
• [PATCH 3/3] omap: board-sdp4430: declare support for MMC_PM_KEEP_POWER   Luciano Coelho
• [V1 2/3] RTC: sa1100: remove redundant code of setting alarm   Haojian Zhuang
• [PATCH 2/3] omap_hsmmc: add pm_caps field   Igor Grinberg
• [PATCH] ARM: fix unwinding for XIP kernels   Uwe Kleine-König
• [PATCH 2/3] omap_hsmmc: add pm_caps field   Eliad Peller
• [PATCH] ARM: fix unwinding for XIP kernels   Catalin Marinas
• 2.6.38 port not booting on i.MX53 SoM   Uwe Kleine-König
• [PATCH 3/3] omap: board-sdp4430: declare support for MMC_PM_KEEP_POWER   Eliad Peller
• [PATCH 3/3] omap: board-sdp4430: declare support for MMC_PM_KEEP_POWER   Luciano Coelho
• [GIT PULL] at91 IIO/ADC platform data for 3.2   Nicolas Ferre
• [RFC 1/2] dma-buf: Introduce dma buffer sharing mechanismch   Daniel Vetter
• [PATCH 1/3] dmaengine: at_hdmac: add const to struct platform_device_id definition   Vinod Koul
• [PATCH 2/3] omap_hsmmc: add pm_caps field   Igor Grinberg
• [PATCH v2 1/4] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [03: PATCH 0/5] The remaining stuff   Linus Walleij
• [PATCH v2 1/4] ARM: vexpress: Get rid of MMIO_P2V   Russell King - ARM Linux
• Fwd: Re: [03: PATCH 0/5] The remaining stuff   Hans J. Koch
• [PATCH v2 1/4] ARM: vexpress: Get rid of MMIO_P2V   Dave Martin
• [PATCH v2 2/4] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [03: PATCH 0/5] The remaining stuff   Russell King - ARM Linux
• [PATCH v2 2/3] ARM: Exynos4: Add ioremap interceptor for statically remapped regions   Marek Szyprowski
• [PATCH V2] mfd: Fixed mixed up ADC single channel readout   Robin van der Gracht
• [03: PATCH 0/5] The remaining stuff   Linus Walleij
• GIC irq_start detection breaks 3.2 boot on platforms without PPIs   Will Deacon
• [PATCH v2 2/4] ARM: vexpress: Add DT support in v2m   Dave Martin
• [PATCH] ARM: cpu topology: fix warning   Will Deacon
• [PATCH 1/1] ARM: at91: fix clock conid for atmel_tcb.1 on 9260/9g20   Jean-Christophe PLAGNIOL-VILLARD
• GIC irq_start detection breaks 3.2 boot on platforms without PPIs   Russell King - ARM Linux
• Want to Get Suggestion for MX28 USB Submisson   Chen Peter-B29397
• [PATCH v10] AT91: Add a driver for the ADC   Maxime Ripard
• [PATCH 1/2] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 2/2] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCH 3/7] ARM: pxa: enable pinmux in pxa pwm   Russell King - ARM Linux
• [PATCH V2] mfd: Fixed unconditional reset of the ADC reading enable bits   Robin van der Gracht
• [PATCH 1/7] pinctrl: enable pxa3xx pinmux   Linus Walleij
• [PATCH V2] mfd: Fixed unconditional reset of the ADC reading enable bits   Uwe Kleine-König
• [PATCH 1/7] pinctrl: enable pxa3xx pinmux   Haojian Zhuang
• [PATCH 3/5] regulator: pass device_node to of_get_regulator_init_data()   Mark Brown
• [PATCH] [media] V4L: atmel-isi: add code to enable/disable ISI_MCK clock   Nicolas Ferre
• [PATCH 4/5] regulator: mc13892: add device tree probe support   Mark Brown
• [PATCH 0/5] Add device tree support for mc13892 regulator driver   Shawn Guo
• [PATCH 1/5] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH 2/5] regulator: fix label names used in device tree bindings   Shawn Guo
• [PATCH 3/5] regulator: pass device_node to of_get_regulator_init_data()   Shawn Guo
• [PATCH 4/5] regulator: mc13892: add device tree probe support   Shawn Guo
• [PATCH 5/5] arm/imx: add mc13892 support into imx51-babbage.dts   Shawn Guo
• [PATCH v2 3/4] omap-serial: Add minimal device tree support   Rob Herring
• [PATCH v2 4/4] ARM: omap: pass minimal SoC/board data for UART from dt   Rob Herring
• [PATCH v2 0/4] OMAP serial device tree support   Rob Herring
• [PATCH 1/1] ARM: at91: fix clock conid for atmel_tcb.1 on 9260/9g20   Nicolas Ferre
• [PATCH] ARM: S3C64XX: Configure WM1250 EV1 GPIOs on Cragganmore   Mark Brown
• [PATCH] [media] V4L: atmel-isi: add code to enable/disable ISI_MCK clock   Guennadi Liakhovetski
• GIC irq_start detection breaks 3.2 boot on platforms without PPIs   Catalin Marinas
• [PATCH 3/5] regulator: pass device_node to of_get_regulator_init_data()   Shawn Guo
• [PATCH 4/5] regulator: mc13892: add device tree probe support   Shawn Guo
• GIC irq_start detection breaks 3.2 boot on platforms without PPIs   Will Deacon
• [PATCH v2 0/4] Versatile Express DT support   Rob Herring
• [PATCH] ARM: S3C64XX: Add linux/export.h to dev-spi.c   Mark Brown
• [PATCH v2 0/4] Versatile Express DT support   Dave Martin
• [PATCH v2 0/4] Versatile Express DT support   Dave Martin
• [PATCH] [media] V4L: atmel-isi: add code to enable/disable ISI_MCK clock   Nicolas Ferre
• [PATCH v2 0/4] Versatile Express DT support   Pawel Moll
• [PATCH v2 0/4] Versatile Express DT support   Dave Martin
• [PATCH v2 0/4] Versatile Express DT support   Pawel Moll
• [PATCH 4/5] init/calibrate.c: allow for recalibration of loops per jiffy   Russell King - ARM Linux
• [PATCH v2 0/4] Versatile Express DT support   Rob Herring
• [PATCH] [media] V4L: atmel-isi: add code to enable/disable ISI_MCK clock   Russell King - ARM Linux
• [PATCH v2 0/4] Versatile Express DT support   Pawel Moll
• [PATCH] ARM: kprobes: Change testcase with unpredictable STRD instruction   Nicolas Pitre
• [PATCH v2 4/4] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Dave Martin
• [PATCH] ARM: kprobes: Restrict probing SWP instructions to ARMv5 and below   Nicolas Pitre
• [PATCH v2] ARM: pl330: Fix a race condition   Javi Merino
• [V2 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Robert Jarzmik
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Rabin Vincent
• [PATCH v2 4/4] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Pawel Moll
• [PATCH 4/4] ARM: add jump label support   Rabin Vincent
• [PATCH v2 4/4] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Dave Martin
• [PATCH] ARM: S3C64XX: Staticise s3c6400_sysclass   Mark Brown
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Dave Martin
• [PATCH 1/5] ARM: OMAP1: Fix dpll1 default rate reprogramming method   Tony Lindgren
• [PATCH 3/5] ARM: OMAP1: Fix dpll1 reprogramming not actually allowed   Tony Lindgren
• [PATCH v2 0/6] Consolidate identity mapping code in idmap.c   Will Deacon
• [PATCH v2 1/6] ARM: idmap: populate identity map pgd at init time using .init.text   Will Deacon
• [PATCH v2 2/6] ARM: suspend: use idmap_pgd instead of suspend_pgd   Will Deacon
• [PATCH v2 3/6] ARM: proc-*.S: place cpu_reset functions into .idmap.text section   Will Deacon
• [PATCH v2 4/6] ARM: idmap: use idmap_pgd when setting up mm for reboot   Will Deacon
• [PATCH v2 5/6] ARM: head.S: only include __turn_mmu_on in the initial identity mapping   Will Deacon
• [PATCH v2 6/6] ARM: SMP: use idmap_pgd for mapping MMU enable during secondary booting   Will Deacon
• [PATCH v7 0/5] kexec fixes and soft restart code   Will Deacon
• [PATCH v7 1/5] ARM: lib: add call_with_stack function for safely changing stack   Will Deacon
• [PATCH v7 2/5] ARM: reset: implement soft_restart for jumping to a physical address   Will Deacon
• [PATCH v7 3/5] ARM: soft_restart: disable the outer L2 when the last CPU is going down   Will Deacon
• [PATCH v7 4/5] ARM: stop: execute platform callback from cpu_stop code   Will Deacon
• [PATCH v7 5/5] ARM: kexec: use soft_restart for branching to the reboot buffer   Will Deacon
• [AT91 PULL] ioremap pull request for 3.3   Arnd Bergmann
• [AT91 PULL] gpio cleanup pull request for 3.3   Arnd Bergmann
• [PATCH 2/5] regulator: fix label names used in device tree bindings   Mark Brown
• [PATCH v5] power: bq20z75: devicetree init support   Rhyland Klein
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Tixy
• [PATCH 1/7] pinctrl: enable pxa3xx pinmux   Stephen Warren
• [PATCH v2] ARM: restart: davinci: use new restart hook   Sekhar Nori
• [PATCH 2a/5] Remove unsafe clock values from omap1_defconfig   Janusz Krzysztofik
• [PATCH 4/5] init/calibrate.c: allow for recalibration of loops per jiffy   Janusz Krzysztofik
• [PATCH 5/5 v2] ARM: OMAP1: recalculate loops per jiffy after dpll1 reprogram   Janusz Krzysztofik
• [PATCH V2] arm/tegra: convert tegra20 to GIC devicetree binding   Stephen Warren
• [AT91 PULL] gpio cleanup pull request for 3.3   Jean-Christophe PLAGNIOL-VILLARD
• [AT91 PULL] ioremap pull request for 3.3   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/7] pinctrl: enable pxa3xx pinmux   Eric Miao
• [RFC V1 7/8] ARM i.MX: prepare common clk support   Mike Turquette
• [RFC V1 7/8] ARM i.MX: prepare common clk support   Richard Zhao
• [PATCH v2] ARM: pl330: Fix a race condition   Boojin Kim
• [RFC PATCH 1/2] power: Charger-Manager: add initial Charger-Manager driver   Haojian Zhuang
• [V2 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Jean-Christophe PLAGNIOL-VILLARD
• [V2 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 1/2] power: Charger-Manager: add initial Charger-Manager driver   MyungJoo Ham
• [RFC PATCH 1/2] power: Charger-Manager: add initial Charger-Manager driver   Haojian Zhuang
• [V2 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Haojian Zhuang
• [PATCH] ARM: davinci: fix mach/gpio.h includes   Patil, Rachna
• [RFC V1 7/8] ARM i.MX: prepare common clk support   Richard Zhao
• [PATCH] arm: mx23: recognise stmp378x as mx23   Shawn Guo
• [V2 3/3] RTC: sa1100: support sa1100, pxa and mmp soc families   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/3] Change ARCH_NR_GPIO into a Kconfig variable   Peter De Schrijver
• [PATCH v2 3/4] omap-serial: Add minimal device tree support   Rajendra Nayak
• [PATCH] USB: ehci-mxc: get rid of the uses of cpu_is_mx()   Peter Chen
• [PATCH] dmaengine/amba-pl08x: Config ccfg and increment phychan_hold if phychan is true   Viresh Kumar
• [PATCH] USB: ehci-mxc: get rid of the uses of cpu_is_mx()   Lothar Waßmann
• [PATCH] USB: ehci-mxc: get rid of the uses of cpu_is_mx()   Sascha Hauer
• [PATCH] USB: ehci-mxc: get rid of the uses of cpu_is_mx()   Chen Peter-B29397
• [GIT PULL] DSS fixes for v3.2-rc2   Tomi Valkeinen
• [PATCH] USB: ehci-mxc: get rid of the uses of cpu_is_mx()   Uwe Kleine-König
• [PATCH] mfd: max8998: Use standard device wakeup for handling wakeup device   jhbird.choi at samsung.com
• [PATCH] USB: ehci-mxc: get rid of the uses of cpu_is_mx()   s.hauer at pengutronix.de
• [PATCH 1/5] mfd: mc13xxx: add device tree probe support   Rajendra Nayak
• [PATCH 2/5] regulator: fix label names used in device tree bindings   Rajendra Nayak
• [PATCH 1/7] pinctrl: enable pxa3xx pinmux   Linus Walleij
• [PATCH 0/3] Change ARCH_NR_GPIO into a Kconfig variable   Linus Walleij
• [PATCH] dmaengine/amba-pl08x: Config ccfg and increment phychan_hold if phychan is true   Linus Walleij
• [PATCH] ARM: samsung: Configure GPxxCON as irq in .irq_set_type callback   Kyungmin Park
• [PATCH 1/7] pinctrl: enable pxa3xx pinmux   Haojian Zhuang
• [RFC][PATCH] Consolidate Samsung MAINTAINERS   Heiko Stübner
• [PATCH 0/3] Change ARCH_NR_GPIO into a Kconfig variable   Russell King - ARM Linux
• [PATCH] ARM: OMAP3: hsmmc: fix MMC 2 setup for AM35x   Igor Grinberg
• [GIT PULL] U300 and Ux500 defconfigs   Linus Walleij
• [PATCH v2] ARM: pl330: Fix a race condition   Javi Merino
• [PATCH] arm: mx23: recognise stmp378x as mx23   Wolfram Sang
• [PATCH v2] ARM: pl330: Fix a race condition   Jassi Brar
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Dave Martin
• [PATCH] USB: ehci-mxc: get rid of the uses of cpu_is_mx()   Chen Peter-B29397
• 2.6.38 port not booting on i.MX53 SoM   Wayne Tams
• [PATCH V3] mfd: Fixed unconditional reset of the ADC reading enable bits   Robin van der Gracht
• 2.6.38 port not booting on i.MX53 SoM   Fabio Estevam
• 2.6.38 port not booting on i.MX53 SoM   Wayne Tams
• [PATCHv2 0/7]ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux   Vishwanath Sripathy
• 2.6.38 port not booting on i.MX53 SoM   Wolfgang Grandegger
• [RFC PATCH 0/6] ARM: Remove the __ARCH_WANT_INTERRUPTS_ON_CTXSW definition   Catalin Marinas
• [RFC PATCH 1/6] sched: Introduce the finish_arch_post_lock_switch() scheduler hook   Catalin Marinas
• [RFC PATCH 2/6] ARM: Use TTBR1 instead of reserved context ID   Catalin Marinas
• [RFC PATCH 3/6] ARM: Allow ASID 0 to be allocated to tasks   Catalin Marinas
• [RFC PATCH 4/6] ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on ASID-capable CPUs   Catalin Marinas
• [RFC PATCH 5/6] ARM: Remove current_mm per-cpu variable   Catalin Marinas
• [RFC PATCH 6/6] ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on pre-ARMv6 CPUs   Catalin Marinas
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Ohad Ben-Cohen
• [RFC PATCH 0/6] ARM: Remove the __ARCH_WANT_INTERRUPTS_ON_CTXSW definition   Peter Zijlstra
• [PATCH V2] arm/tegra: convert tegra20 to GIC devicetree binding   Cousson, Benoit
• [PATCH v2 1/2] OMAP2+: DMA: Workaround for invalid source position   Péter Ujfalusi
• [PATCH 1/3] ARM: at91/aic: add device tree support for AIC   Nicolas Ferre
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Michael S. Tsirkin
• [PATCH 0/7] Cragganmore updates for 3.3   Mark Brown
• [PATCH 1/7] ARM: S3C64XX: Raise the frequency of the second I2C bus on Cragganmore   Mark Brown
• [PATCH 2/7] ARM: S3C64XX: Use software initiated powerdown for Cragganmore   Mark Brown
• [PATCH 3/7] ARM: S3C64XX: Configure WM1250 EV1 GPIOs on Cragganmore   Mark Brown
• [PATCH 4/7] ARM: S3C64XX: Improve logging of unknown Cragganmore module types   Mark Brown
• [PATCH 5/7] ARM: S3C64XX: Run Tobermory interrupts in the default mode   Mark Brown
• [PATCH 6/7] ARM: S3C64XX: Hook up platform data for Kilchomin module on Cragganmore   Mark Brown
• [PATCH 7/7] ARM: S3C64XX: Hook up Littlemill audio card on Cragganmore   Mark Brown
• [PATCH] ARM: mmci: add capabilities2 for MMC_CAP2   Ulf Hansson
• [PATCH] ARM: u300: delete memory.h   Linus Walleij
• [PATCH 1/3] ARM: at91/aic: add device tree support for AIC   Nicolas Ferre
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Ohad Ben-Cohen
• [PATCH v3] pxa2xx_spi: fix memory corruption   Vasily Khoruzhick
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Jon Medhurst (Tixy)
• [PATCH] ARM: u300: delete memory.h   Nicolas Pitre
• [PATCH v3] pxa2xx_spi: fix memory corruption   Marek Vasut
• [PATCH 1/7] pinctrl: enable pxa3xx pinmux   Arnd Bergmann
• [GIT PULL] U300 and Ux500 defconfigs   Arnd Bergmann
• [GIT PULL] DSS fixes for v3.2-rc2   Arnd Bergmann
• [PATCH] mmc: mmci: Fixup error handling for dma   Ulf Hansson
• [PATCH] ARM: cpu topology: fix warning   Vincent Guittot
• [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Stefano Stabellini
• [PATCHv2 0/7]ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux   Vishwanath Sripathy
• [PATCH V2] mmc: mmci: Do not release spinlock in request_end   Ulf Hansson
• [PATCH v3 0/5] Versatile Express DT support   Pawel Moll
• [PATCH v3 1/5] ARM: versatile: Add missing ENDPROC to headsmp.S   Pawel Moll
• [PATCH v3 2/5] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Pawel Moll
• [PATCH v3 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Pawel Moll
• [PATCH v8 00/24] gpio/omap: driver cleanup and fixes   Kevin Hilman
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Michael S. Tsirkin
• [PATCH v8 00/24] gpio/omap: driver cleanup and fixes   Kevin Hilman
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Michael S. Tsirkin
• [RFC PATCH] ARM: Add generic instruction opcode manipulation helpers   Dave Martin
• [PATCH 1/7] pinctrl: enable pxa3xx pinmux   Haojian Zhuang
• [PATCH 1/7] pinctrl: enable pxa3xx pinmux   Arnd Bergmann
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Cousson, Benoit
• [RFC] ARM support for syscall tracing   Steven Walter
• [PATCH 1/3] ARM: add support for the generic syscall.h interface   Steven Walter
• [PATCH 2/3] ARM: add TRACEHOOK support   Steven Walter
• [PATCH 3/3] ARM: support syscall tracing   Steven Walter
• [PATCH] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [PATCH v3 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Dave Martin
• [PATCH v3 0/5] Versatile Express DT support   Dave Martin
• [PATCH 2/3] ARM: add TRACEHOOK support   Will Deacon
• [PATCH] ARM: errata: Remove SMP dependency for erratum 720789   Dave Martin
• [PATCH] ARM: errata: Remove SMP dependency for erratum 751472   Dave Martin
• [PATCH V2] arm/tegra: convert tegra20 to GIC devicetree binding   Stephen Warren
• [PATCH v3 0/5] Versatile Express DT support   Pawel Moll
• [PATCH V2] arm/tegra: convert tegra20 to GIC devicetree binding   Nicolas Ferre
• [PATCH 3/3] ARM: support syscall tracing   Will Deacon
• [PATCH 0/6] AT91 Reset cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: errata: Remove SMP dependency for erratum 751472   Russell King - ARM Linux
• [PATCH 0/6] AT91 Reset cleanup   Russell King - ARM Linux
• [PATCH 3/3] ARM: support syscall tracing   Russell King - ARM Linux
• [PATCH V2] arm/tegra: convert tegra20 to GIC devicetree binding   Cousson, Benoit
• [PATCH 0/6] AT91 Reset cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/3] ARM: add TRACEHOOK support   Steven Walter
• [PATCH 1/6] ARM: at91: fix cap9 ddrsdr register   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/6] ARM: at91: merge at91cap9_ddrsdr.h in at91sam9_ddrsdr.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/6] ARM: at91: introduce AT91_SAM9_ALT_RESET to select the at91sam9 alternative reset   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/6] ARM: restart: at91: use new restart hook   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] ARM: at91: Fix at91sam9g45 and at91cap9 reset   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/6] ARM: at91: make rstc soc independent   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/3] ARM: support syscall tracing   Steven Walter
• [PATCH] ARM: errata: Remove SMP dependency for erratum 751472   Dave Martin
• [PATCH v2 1/3] ARM: at91/aic: add device tree support for AIC   Nicolas Ferre
• [PATCH 3/3] ARM: OMAP: hwmod: Look for hwmod/module level context lost count if supported   Cousson, Benoit
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Paul Walmsley
• [PATCH 3/3] ARM: support syscall tracing   Steven Walter
• [PATCH 0/6] AT91 Reset cleanup   Marek Vasut
• [PATCH] ARM: mxs: Select FEC driver   Fabio Estevam
• [PATCH 0/6] AT91 Reset cleanup   Russell King - ARM Linux
• [PATCH] mx28: added LRADC and touchscreen support   Arnd Bergmann
• [PATCH] USB: ehci-mxc: get rid of the uses of cpu_is_mx()   s.hauer at pengutronix.de
• [RFC V1 7/8] ARM i.MX: prepare common clk support   Mike Turquette
• [PATCH 0/6] AT91 Reset cleanup   Marek Vasut
• [PATCH] ARM: mxs: Select FEC driver   Marek Vasut
• [PATCH] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Rob Herring
• [PATCH] ARM: mxs: Select FEC driver   Uwe Kleine-König
• [GIT PULL] msm: timer updates for 3.3   David Brown
• [PATCH V2] arm/tegra: convert tegra20 to GIC devicetree binding   Rob Herring
• does non-continuous RAM means I need to select the sparse memory model?   Uwe Kleine-König
• [GIT PULL] msm: timer updates for 3.3   Arnd Bergmann
• [PATCH] [media] v4l: s5p-tv: Use kcalloc instead of kzalloc to allocate array   Thomas Meyer
• [PATCH V2] arm/tegra: convert tegra20 to GIC devicetree binding   Stephen Warren
• [PATCH v3 2/5] ARM: vexpress: Get rid of MMIO_P2V   Arnd Bergmann
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Arnd Bergmann
• [PATCH v3 0/5] Versatile Express DT support   Arnd Bergmann
• [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Arnd Bergmann
• [PATCH 3/3] ARM: support syscall tracing   Russell King - ARM Linux
• [PATCH] ARM: errata: Remove SMP dependency for erratum 751472   Russell King - ARM Linux
• [patch 1/1] kirkwood: Add configuration for MPP12 as GPIO   Arnaud Patard (Rtp)
• [PATCH 0/6] AT91 Reset cleanup   Russell King - ARM Linux
• [PATCH 5/6] ARM: at91: Fix at91sam9g45 and at91cap9 reset   Russell King - ARM Linux
• [PATCH] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Russell King - ARM Linux
• [PATCH V2] arm/tegra: convert tegra20 to GIC devicetree binding   Rob Herring
• [PATCH 0/6] AT91 Reset cleanup   Marek Vasut
• [PATCH 0/6] AT91 Reset cleanup   Russell King - ARM Linux
• [PATCH V2] arm/tegra: convert tegra20 to GIC devicetree binding   Stephen Warren
• [PATCH 0/6] AT91 Reset cleanup   Marek Vasut
• [patch 1/1] kirkwood: Add configuration for MPP12 as GPIO   Nicolas Pitre
• [PATCH V2] arm/tegra: convert tegra20 to GIC devicetree binding   Rob Herring
• [PATCH V2] arm/tegra: convert tegra20 to GIC devicetree binding   Stephen Warren
• [GIT PULL] arm-soc fixes for 3.2, part 2   Arnd Bergmann
• [PATCH] at91_ether: use gpio_is_valid for phy IRQ line   David Miller
• does non-continuous RAM means I need to select the sparse memory model?   Fabio Estevam
• [PATCHv2 0/7]ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux   Kevin Hilman
• [PATCH V3] arm/tegra: convert tegra20 to GIC devicetree binding   Stephen Warren
• [PATCH 1/2] irq: Add dummy irq_domain_add_simple_when not defined   Stephen Warren
• [PATCH 2/2] gpio/tegra: Make it a DT interrupt controller   Stephen Warren
• Want to Get Suggestion for MX28 USB Submisson   Shawn Guo
• Want to Get Suggestion for MX28 USB Submisson   Chen Peter-B29397
• [PATCH] USB: ehci-mxc: get rid of the uses of cpu_is_mx()   Chen Peter-B29397
• [PATCH 2/2] gpio/tegra: Make it a DT interrupt controller   Rob Herring
• [PATCH] MXC PWM: should active during DOZE/WAIT/DBG mode   Jason Chen
• [V3 0/6] rtc-sa1100 clean up   Jett.Zhou
• [V3 6/6] ARM: sa1100: fix build error   Haojian Zhuang
• [V3 5/6] ARM: sa1100: clean up of the clock support   Haojian Zhuang
• [PATCH] at91_ether: use gpio_is_valid for phy IRQ line   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/6] AT91 Reset cleanup   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/6] ARM: at91: Fix at91sam9g45 and at91cap9 reset   Jean-Christophe PLAGNIOL-VILLARD
• [V3 0/6] rtc-sa1100 clean up   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] at91_ether: use gpio_is_valid for phy IRQ line   David Miller
• [RFC V1 7/8] ARM i.MX: prepare common clk support   Richard Zhao
• [V3 0/6] rtc-sa1100 clean up   Jett.Zhou
• [V3 1/6] RTC: sa1100: Clean out ost register   Jett.Zhou
• [V3 1/6] RTC: sa1100: Clean out ost register   Jett.Zhou
• [V3 2/6] RTC: sa1100: remove redundant code of setting alarm   Jett.Zhou
• [V3 3/6] RTC: sa1100: support sa1100, pxa and mmp soc families   Jett.Zhou
• [V3 4/6] ARM: pxa: add dummy clock for sa1100-rtc   Jett.Zhou
• [V3 5/6] ARM: sa1100: clean up of the clock support   Jett.Zhou
• [V3 6/6] ARM: sa1100: fix build error   Jett.Zhou
• [V3 0/6] rtc-sa1100 clean up   Jett.Zhou
• [V3 0/6] rtc-sa1100 clean up   Jett Zhou
• does non-continuous RAM means I need to select the sparse memory model?   Uwe Kleine-König
• [PATCH] ARM: at91: Fix USB gadget registration   Anders Darander
• [RFC PATCH 1/2] power: Charger-Manager: add initial Charger-Manager driver   MyungJoo Ham
• [PATCH 1/5] mfd: mc13xxx: add device tree probe support   Shawn Guo
• [PATCH resend] s3c24xx: cpufreq: Fix compilation error when CONFIG_CPU_FREQ_S3C24XX_DEBUGFS selected.   Denis Kuzmenko
• [PATCH resend2] arm: s3c24xx: Add new LCD (W35i) support for Mini2440 board   Denis Kuzmenko
• [PATCH] ARM: mxs: Select FEC driver   Shawn Guo
• [PATCH] ARM: davinci: fix mach/gpio.h includes   Nori, Sekhar
• [PATCH] ARM: mxs: Select FEC driver   Uwe Kleine-König
• [PATCH v11] AT91: Add a driver for the ADC   Maxime Ripard
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Maxime Ripard
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Maxime Ripard
• [PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board   Maxime Ripard
• [PATCHv2 0/7]ARM: OMAP3PLUS PM: Add IO DaisyChain support via hwmod mux   Vishwanath Sripathy
• [PATCH] ARM: davinci: fix mach/gpio.h includes   Patil, Rachna
• help for BogoMIPS issue on linux kernel 3.0   JiSheng Zhang
• [PATCH 1/3] ARM: AT91: Add platform data for the ADCs   Nicolas Ferre
• [PATCH 1/2] [media] V4L: atmel-isi: add code to enable/disable ISI_MCK clock   Josh Wu
• [PATCH 2/2] [media] V4L: atmel-isi: add clk_prepare()/clk_unprepare() functions   Josh Wu
• [PATCH RESEND] davinci: dm646x: move vpif related code to driver core header from platform   Nori, Sekhar
• [PATCH v3 0/5] Versatile Express DT support   Dave Martin
• [PATCH 4/7] tty: serial: support pinmux in pxa serial   Greg KH
• [PATCH V3 3/6] ARM: exynos: save L2 settings during bootup   Lorenzo Pieralisi
• [PATCH v2] ARM: errata: Remove SMP dependency for erratum 751472   Dave Martin
• [PATCH v3 0/5] Versatile Express DT support   Pawel Moll
• [PATCH v2 1/6] ARM: idmap: populate identity map pgd at init time using .init.text   Catalin Marinas
• [PATCH v2 4/6] ARM: idmap: use idmap_pgd when setting up mm for reboot   Catalin Marinas
• [PATCH v2] net: fec: Select the FEC driver by default for i.MX SoCs   Fabio Estevam
• [PATCH v3 2/5] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [PATCH v3 0/5] ARM: davinci: re-arrange definitions to have a common davinci header   Nori, Sekhar
• [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Stefano Stabellini
• [PATCH] ARM: mmci: add capabilities2 for MMC_CAP2   Linus Walleij
• [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Stefano Stabellini
• [PATCH] ARM: errata: Remove SMP dependency for erratum 720789   Will Deacon
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Ohad Ben-Cohen
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Ohad Ben-Cohen
• [PATCH 1/7] pinctrl: enable pxa3xx pinmux   Linus Walleij
• [PATCH] OMAP2, 3: DSS2: Include linux/delay.h and common.h to fix build errors   Axel Lin
• [PATCH v3 0/5] Versatile Express DT support   Dave Martin
• [PATCH v3 0/5] Versatile Express DT support   Pawel Moll
• [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Arnd Bergmann
• [PATCH] mmc: mmci: Fixup error handling for dma   Linus Walleij
• [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Ian Campbell
• [PATCH v2] net: fec: Select the FEC driver by default for i.MX SoCs   Uwe Kleine-König
• [PATCH v2] net: fec: Select the FEC driver by default for i.MX SoCs   Uwe Kleine-König
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Arnd Bergmann
• [PATCH] ARM: mxs: Select FEC driver   Shawn Guo
• [PATCH v2] net: fec: Select the FEC driver by default for i.MX SoCs   Shawn Guo
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [V3 1/6] RTC: sa1100: Clean out ost register   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 2/5] ARM: vexpress: Get rid of MMIO_P2V   Arnd Bergmann
• [V3 2/6] RTC: sa1100: remove redundant code of setting alarm   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v3 2/5] ARM: vexpress: Get rid of MMIO_P2V   Pawel Moll
• [V3 3/6] RTC: sa1100: support sa1100, pxa and mmp soc families   Jean-Christophe PLAGNIOL-VILLARD
• [V3 4/6] ARM: pxa: add dummy clock for sa1100-rtc   Jean-Christophe PLAGNIOL-VILLARD
• [V3 5/6] ARM: sa1100: clean up of the clock support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Shawn Guo
• [PATCH] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Catalin Marinas
• [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Stefano Stabellini
• [PATCH] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Shawn Guo
• [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Arnd Bergmann
• [PATCH v2 4/6] ARM: idmap: use idmap_pgd when setting up mm for reboot   Will Deacon
• [PATCH v8 00/24] gpio/omap: driver cleanup and fixes   T Krishnamoorthy, Balaji
• [PATCH v3] net: fec: Select the FEC driver by default for i.MX SoCs   Fabio Estevam
• [PATCH] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• ARM support for syscall tracing   Steven Walter
• [V3 1/6] RTC: sa1100: Clean out ost register   Haojian Zhuang
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Michael S. Tsirkin
• [V3 2/6] RTC: sa1100: remove redundant code of setting alarm   Haojian Zhuang
• [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Pawel Moll
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Michael S. Tsirkin
• [PATCH] mx28: added LRADC and touchscreen support   Peter Rusko
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Arnd Bergmann
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Dave Martin
• [PATCH] mx28: LRADC macro rename   Peter Rusko
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Dave Martin
• [PATCH] arm/imx6: add restart support for imx6q   Shawn Guo
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Ohad Ben-Cohen
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Michael S. Tsirkin
• [PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod   Cousson, Benoit
• [PATCH] ARM: at91: Fix USB AT91 gadget registration   Nicolas Ferre
• [RFC V1 7/8] ARM i.MX: prepare common clk support   Mike Turquette
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Ohad Ben-Cohen
• [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Ian Campbell
• [GIT PULL] at91 fixes for 3.2-rc4   Nicolas Ferre
• [PATCH 1/4] Add generic ARM instruction set condition code checks.   Dave Martin
• [PATCH 3/4] Add condition code checking to SWP emulation handler.   Dave Martin
• [PATCH 4/4] Use generic ARM instruction set condition code checks for kprobes.   Dave Martin
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Pawel Moll
• [PATCH 2/2] gpio/tegra: Make it a DT interrupt controller   Stephen Warren
• [GIT PULL] at91 fixes for 3.2-rc4   Arnd Bergmann
• [PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.   Arnd Bergmann
• [V3 0/6] rtc-sa1100 clean up   Arnd Bergmann
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Dave Martin
• [PATCH RFC] ARM: unwind: optimize to not convert each table value but the address   Catalin Marinas
• [PATCH v2] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Dave Martin
• [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Arnd Bergmann
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Pawel Moll
• [Embeddedxen-devel] [Xen-devel] [ANNOUNCE] Xen port to Cortex-A15 / ARMv7 with virt extensions   Stefano Stabellini
• [PATCH v3 5/5] ARM: vexpress: DT-based support for CoreTiles Express A5x2 and A9x4   Pawel Moll
• [PATCH v3 3/5] ARM: vexpress: Add DT support in v2m   Pawel Moll
• [PATCH] ARM: fix unwinding for XIP kernels   Uwe Kleine-König
• [PATCH 2/2] gpio/tegra: Make it a DT interrupt controller   Rob Herring
• [PATCH] ARM: fix unwinding for XIP kernels   Nicolas Pitre
• [RFC 6/8] of: add clock providers   Grant Likely
• [PATCH] ARM: fix unwinding for XIP kernels   Catalin Marinas
• [PATCH] mx28: LRADC macro rename   Wolfram Sang
• [PATCH v2] ARM: pl2x0/pl310: Refactor Kconfig to be more maintainable   Rob Herring
• [RFC V1 1/8] clk: support static parent   Mike Turquette
• [RFC V1 3/8] clk: Add support for simple dividers   Mike Turquette
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Nicolas Pitre
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Mark Brown
• [PATCH 2a/5 v2] ARM: OMAP1: select clock rate by CPU type   Janusz Krzysztofik
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Stephen Warren
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Nicolas Pitre
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Russell King - ARM Linux
• [PATCH v3] net: fec: Select the FEC driver by default for i.MX SoCs   David Miller
• [PATCH v2 0/6] Consolidate identity mapping code in idmap.c   Russell King - ARM Linux
• [PATCH] mmc: mmci: Fixup error handling for dma   Russell King - ARM Linux
• [PATCH 2a/5 v2] ARM: OMAP1: select clock rate by CPU type   Tony Lindgren
• [PATCH 2a/5] Remove unsafe clock values from omap1_defconfig   Tony Lindgren
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Ohad Ben-Cohen
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Michael S. Tsirkin
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Ohad Ben-Cohen
• [PATCH-V4 3/3] arm:omap:am33xx: Add low level debugging support   Kevin Hilman
• [GIT PULL] msm misc changes for 3.3   David Brown
• [PATCH-V4 0/3] Introducing TI's New SoC/board AM335XEVM   Kevin Hilman
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Michael S. Tsirkin
• [PATCH 20/62] mmc: remove the second argument of k[un]map_atomic()   David Brown
• [PATCH] ARM: kprobes: Restrict probing SWP instructions to ARMv5 and below   Russell King - ARM Linux
• [PATCH] ARM: kprobes: Change testcase with unpredictable STRD instruction   Russell King - ARM Linux
• [RFC PATCH 01/11] arm:omap:am33xx: Add voltage domain data   Kevin Hilman
• [RFC PATCH 02/11] arm:omap:am33xx: Integrate voltage domain data   Kevin Hilman
• [PATCH 1/3] ARM: msm: Remove MSM7x00 support   David Brown
• [PATCH 2/3] gpio_msm: remove support for MSM7x01   David Brown
• [PATCH 3/3] ARM: msm: Remove cpu_is test for msm7201 soc   David Brown
• [PATCH 1/2] arm/tegra: Remove use of TEGRA_GPIO_TO_IRQ   Stephen Warren
• [PATCH 2/2] gpio/tegra: Dynamically allocate IRQ base, and support DT   Stephen Warren
• [RFC PATCH 03/11] arm:omap:am33xx: Add power domain data   Kevin Hilman
• [RFC PATCH 04/11] arm:omap:am33xx: Integrate powerdomain to OMAP power framework   Kevin Hilman
• [PATCH v3 3/5] clk: introduce the common clock framework   Paul Walmsley
• [RFC PATCH 00/11] arm:omap:am33xx: Add basic voltage, power, clock & HWMOD data   Kevin Hilman
• [RFC PATCH 07/11] arm:omap:am33xx: Add irq, dma and module base addr to SoC header files   Kevin Hilman
• [RFC V1 7/8] ARM i.MX: prepare common clk support   Richard Zhao
• [PATCH] backlight: pwm_bl: move suspend/resume entries from platform_driver to driver.pm   Barry Song
• [RFC V1 1/8] clk: support static parent   Richard Zhao
• [PATCH] backlight: pwm_bl: move suspend/resume entries from platform_driver to driver.pm   Eric Miao
• [PATCH v2] IMX/SDMA : save the real count for one DMA transaction.   Huang Shijie
• [PATCH v3 3/5] clk: introduce the common clock framework   Paul Walmsley
• [RFC] virtio: use mandatory barriers for remote processor vdevs   Rusty Russell
• [RFC PATCH 4/6] ARM: Remove __ARCH_WANT_INTERRUPTS_ON_CTXSW on ASID-capable CPUs   Frank Rowand
• [RFC PATCH 0/6] ARM: Remove the __ARCH_WANT_INTERRUPTS_ON_CTXSW definition   Frank Rowand
• [PATCH v3 4/5] ARM: vexpress: Initial RS1 memory map support   Nicolas Pitre
• [PATCH] arm: add default value for PHYS_OFFSET Kconfig setting   Paul Gortmaker
• [PATCH] arm: prevent inlining in arxescsi.c causing build failures   Paul Gortmaker
• [V3 0/6] rtc-sa1100 clean up   Jett Zhou