[RFC PATCH 26/34] msm: 8660: Add FLUID support

[David Brown]

From: Stephen Boyd <sboyd at codeaurora.org>

The machine descriptor for FLUID was missing. Adding it allows us
to boot FLUID devices since the basic support for 8660 is the
same.

Signed-off-by: Stephen Boyd <sboyd at codeaurora.org>
Signed-off-by: David Brown <davidb at codeaurora.org>
---
 arch/arm/mach-msm/Kconfig         |    6 ++++++
 arch/arm/mach-msm/board-msm8x60.c |    8 ++++++++
 2 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index ebde97f..57c0ae2 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -138,6 +138,12 @@ config MACH_MSM8X60_FFA
 	help
 	  Support for the Qualcomm MSM8x60 FFA eval board.
 
+config MACH_MSM8X60_FLUID
+	depends on ARCH_MSM8X60
+	bool "MSM8x60 FLUID"
+	help
+	  Support for the Qualcomm MSM8x60 FLUID board.
+
 config MACH_MSM8960_SIM
 	depends on ARCH_MSM8960
 	bool "MSM8960 Simulator"
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index a6bfc91..7b8016f 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -116,3 +116,11 @@ MACHINE_START(MSM8X60_FFA, "QCT MSM8X60 FFA")
 	.init_machine = msm8x60_init,
 	.timer = &msm_timer,
 MACHINE_END
+
+MACHINE_START(MSM8X60_FLUID, "QCT MSM8X60 FLUID")
+	.map_io = msm8x60_map_io,
+	.init_early = msm8x60_init_early,
+	.init_irq = msm8x60_init_irq,
+	.init_machine = msm8x60_init,
+	.timer = &msm_timer,
+MACHINE_END
-- 
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.