[PATCH] ARM: drop support for the ARM1020E processor
Paul Bolle
pebolle at tiscali.nl
Mon Nov 14 15:02:22 EST 2011
The Kconfig entry for ARM1020E processor support (CPU_ARM1020E) depends
on 'n' since (at least) v2.6.12-rc2. Depending on 'n' is an uncommon way
to disable an entry, since that dependency will never be met.
According to the comment above this entry it "needs validating". It's
not entirely clear what that means. Effectively ARM1020E has been
disabled for over six years. This entry, and the code that requires it,
can be dropped now.
Signed-off-by: Paul Bolle <pebolle at tiscali.nl>
---
0) Tested with "make ARCH=arm menuconfig before and after applying this
patch. In neither case could ARM1020E support be selected. git grepped
for any occurrences of ARM1020E after removing all this, but couldn't
find any. There does not seem to be stuff that can be removed because
this is removed.
1) Further testing, if needed, would require building (and running)
related stuff. But I don't think I own related hardware. I also haven't
got the needed toolchain(s) at hand.
arch/arm/include/asm/glue-proc.h | 9 -
arch/arm/mm/Kconfig | 15 +-
arch/arm/mm/Makefile | 1 -
arch/arm/mm/proc-arm1020e.S | 486 --------------------------------------
4 files changed, 1 insertions(+), 510 deletions(-)
delete mode 100644 arch/arm/mm/proc-arm1020e.S
diff --git a/arch/arm/include/asm/glue-proc.h b/arch/arm/include/asm/glue-proc.h
index e2be7f1..25a511b 100644
--- a/arch/arm/include/asm/glue-proc.h
+++ b/arch/arm/include/asm/glue-proc.h
@@ -167,15 +167,6 @@
# endif
#endif
-#ifdef CONFIG_CPU_ARM1020E
-# ifdef CPU_NAME
-# undef MULTI_CPU
-# define MULTI_CPU
-# else
-# define CPU_NAME cpu_arm1020e
-# endif
-#endif
-
#ifdef CONFIG_CPU_ARM1022
# ifdef CPU_NAME
# undef MULTI_CPU
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 67f75a0..9319a95 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -250,19 +250,6 @@ config CPU_ARM1020
Say Y if you want support for the ARM1020 processor.
Otherwise, say N.
-# ARM1020E - needs validating
-config CPU_ARM1020E
- bool "Support ARM1020E processor" if ARCH_INTEGRATOR
- select CPU_32v5
- select CPU_ABRT_EV4T
- select CPU_PABRT_LEGACY
- select CPU_CACHE_V4WT
- select CPU_CACHE_VIVT
- select CPU_CP15_MMU
- select CPU_COPY_V4WB if MMU
- select CPU_TLB_V4WBI if MMU
- depends on n
-
# ARM1022E
config CPU_ARM1022
bool "Support ARM1022E processor" if ARCH_INTEGRATOR
@@ -631,7 +618,7 @@ comment "Processor Features"
config ARM_THUMB
bool "Support Thumb user binaries"
- depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON
+ depends on CPU_ARM720T || CPU_ARM740T || CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM940T || CPU_ARM946E || CPU_ARM1020 || CPU_ARM1022 || CPU_ARM1026 || CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_V6 || CPU_V6K || CPU_V7 || CPU_FEROCEON
default y
help
Say Y if you want to include kernel support for running user space
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index bca7e61..f065856 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -80,7 +80,6 @@ obj-$(CONFIG_CPU_ARM940T) += proc-arm940.o
obj-$(CONFIG_CPU_ARM946E) += proc-arm946.o
obj-$(CONFIG_CPU_FA526) += proc-fa526.o
obj-$(CONFIG_CPU_ARM1020) += proc-arm1020.o
-obj-$(CONFIG_CPU_ARM1020E) += proc-arm1020e.o
obj-$(CONFIG_CPU_ARM1022) += proc-arm1022.o
obj-$(CONFIG_CPU_ARM1026) += proc-arm1026.o
obj-$(CONFIG_CPU_SA110) += proc-sa110.o
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
deleted file mode 100644
index 4251421..0000000
--- a/arch/arm/mm/proc-arm1020e.S
+++ /dev/null
@@ -1,486 +0,0 @@
-/*
- * linux/arch/arm/mm/proc-arm1020e.S: MMU functions for ARM1020
- *
- * Copyright (C) 2000 ARM Limited
- * Copyright (C) 2000 Deep Blue Solutions Ltd.
- * hacked for non-paged-MM by Hyok S. Choi, 2003.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- *
- * These are the low level assembler for performing cache and TLB
- * functions on the arm1020e.
- *
- * CONFIG_CPU_ARM1020_CPU_IDLE -> nohlt
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-#include <asm/hwcap.h>
-#include <asm/pgtable-hwdef.h>
-#include <asm/pgtable.h>
-#include <asm/ptrace.h>
-
-#include "proc-macros.S"
-
-/*
- * This is the maximum size of an area which will be invalidated
- * using the single invalidate entry instructions. Anything larger
- * than this, and we go for the whole cache.
- *
- * This value should be chosen such that we choose the cheapest
- * alternative.
- */
-#define MAX_AREA_SIZE 32768
-
-/*
- * The size of one data cache line.
- */
-#define CACHE_DLINESIZE 32
-
-/*
- * The number of data cache segments.
- */
-#define CACHE_DSEGMENTS 16
-
-/*
- * The number of lines in a cache segment.
- */
-#define CACHE_DENTRIES 64
-
-/*
- * This is the size at which it becomes more efficient to
- * clean the whole cache, rather than using the individual
- * cache line maintenance instructions.
- */
-#define CACHE_DLIMIT 32768
-
- .text
-/*
- * cpu_arm1020e_proc_init()
- */
-ENTRY(cpu_arm1020e_proc_init)
- mov pc, lr
-
-/*
- * cpu_arm1020e_proc_fin()
- */
-ENTRY(cpu_arm1020e_proc_fin)
- mrc p15, 0, r0, c1, c0, 0 @ ctrl register
- bic r0, r0, #0x1000 @ ...i............
- bic r0, r0, #0x000e @ ............wca.
- mcr p15, 0, r0, c1, c0, 0 @ disable caches
- mov pc, lr
-
-/*
- * cpu_arm1020e_reset(loc)
- *
- * Perform a soft reset of the system. Put the CPU into the
- * same state as it would be if it had been reset, and branch
- * to what would be the reset vector.
- *
- * loc: location to jump to for soft reset
- */
- .align 5
-ENTRY(cpu_arm1020e_reset)
- mov ip, #0
- mcr p15, 0, ip, c7, c7, 0 @ invalidate I,D caches
- mcr p15, 0, ip, c7, c10, 4 @ drain WB
-#ifdef CONFIG_MMU
- mcr p15, 0, ip, c8, c7, 0 @ invalidate I & D TLBs
-#endif
- mrc p15, 0, ip, c1, c0, 0 @ ctrl register
- bic ip, ip, #0x000f @ ............wcam
- bic ip, ip, #0x1100 @ ...i...s........
- mcr p15, 0, ip, c1, c0, 0 @ ctrl register
- mov pc, r0
-
-/*
- * cpu_arm1020e_do_idle()
- */
- .align 5
-ENTRY(cpu_arm1020e_do_idle)
- mcr p15, 0, r0, c7, c0, 4 @ Wait for interrupt
- mov pc, lr
-
-/* ================================= CACHE ================================ */
-
- .align 5
-
-/*
- * flush_icache_all()
- *
- * Unconditionally clean and invalidate the entire icache.
- */
-ENTRY(arm1020e_flush_icache_all)
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- mov r0, #0
- mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache
-#endif
- mov pc, lr
-ENDPROC(arm1020e_flush_icache_all)
-
-/*
- * flush_user_cache_all()
- *
- * Invalidate all cache entries in a particular address
- * space.
- */
-ENTRY(arm1020e_flush_user_cache_all)
- /* FALLTHROUGH */
-/*
- * flush_kern_cache_all()
- *
- * Clean and invalidate the entire cache.
- */
-ENTRY(arm1020e_flush_kern_cache_all)
- mov r2, #VM_EXEC
- mov ip, #0
-__flush_whole_cache:
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- mcr p15, 0, ip, c7, c10, 4 @ drain WB
- mov r1, #(CACHE_DSEGMENTS - 1) << 5 @ 16 segments
-1: orr r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
-2: mcr p15, 0, r3, c7, c14, 2 @ clean+invalidate D index
- subs r3, r3, #1 << 26
- bcs 2b @ entries 63 to 0
- subs r1, r1, #1 << 5
- bcs 1b @ segments 15 to 0
-#endif
- tst r2, #VM_EXEC
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
-#endif
- mcrne p15, 0, ip, c7, c10, 4 @ drain WB
- mov pc, lr
-
-/*
- * flush_user_cache_range(start, end, flags)
- *
- * Invalidate a range of cache entries in the specified
- * address space.
- *
- * - start - start address (inclusive)
- * - end - end address (exclusive)
- * - flags - vm_flags for this space
- */
-ENTRY(arm1020e_flush_user_cache_range)
- mov ip, #0
- sub r3, r1, r0 @ calculate total size
- cmp r3, #CACHE_DLIMIT
- bhs __flush_whole_cache
-
-#ifndef CONFIG_CPU_DCACHE_DISABLE
-1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
- add r0, r0, #CACHE_DLINESIZE
- cmp r0, r1
- blo 1b
-#endif
- tst r2, #VM_EXEC
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- mcrne p15, 0, ip, c7, c5, 0 @ invalidate I cache
-#endif
- mcrne p15, 0, ip, c7, c10, 4 @ drain WB
- mov pc, lr
-
-/*
- * coherent_kern_range(start, end)
- *
- * Ensure coherency between the Icache and the Dcache in the
- * region described by start. If you have non-snooping
- * Harvard caches, you need to implement this function.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(arm1020e_coherent_kern_range)
- /* FALLTHROUGH */
-/*
- * coherent_user_range(start, end)
- *
- * Ensure coherency between the Icache and the Dcache in the
- * region described by start. If you have non-snooping
- * Harvard caches, you need to implement this function.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(arm1020e_coherent_user_range)
- mov ip, #0
- bic r0, r0, #CACHE_DLINESIZE - 1
-1:
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- mcr p15, 0, r0, c7, c10, 1 @ clean D entry
-#endif
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- mcr p15, 0, r0, c7, c5, 1 @ invalidate I entry
-#endif
- add r0, r0, #CACHE_DLINESIZE
- cmp r0, r1
- blo 1b
- mcr p15, 0, ip, c7, c10, 4 @ drain WB
- mov pc, lr
-
-/*
- * flush_kern_dcache_area(void *addr, size_t size)
- *
- * Ensure no D cache aliasing occurs, either with itself or
- * the I cache
- *
- * - addr - kernel address
- * - size - region size
- */
-ENTRY(arm1020e_flush_kern_dcache_area)
- mov ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- add r1, r0, r1
-1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
- add r0, r0, #CACHE_DLINESIZE
- cmp r0, r1
- blo 1b
-#endif
- mcr p15, 0, ip, c7, c10, 4 @ drain WB
- mov pc, lr
-
-/*
- * dma_inv_range(start, end)
- *
- * Invalidate (discard) the specified virtual address range.
- * May not write back any entries. If 'start' or 'end'
- * are not cache line aligned, those lines must be written
- * back.
- *
- * - start - virtual start address
- * - end - virtual end address
- *
- * (same as v4wb)
- */
-arm1020e_dma_inv_range:
- mov ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- tst r0, #CACHE_DLINESIZE - 1
- bic r0, r0, #CACHE_DLINESIZE - 1
- mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
- tst r1, #CACHE_DLINESIZE - 1
- mcrne p15, 0, r1, c7, c10, 1 @ clean D entry
-1: mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
- add r0, r0, #CACHE_DLINESIZE
- cmp r0, r1
- blo 1b
-#endif
- mcr p15, 0, ip, c7, c10, 4 @ drain WB
- mov pc, lr
-
-/*
- * dma_clean_range(start, end)
- *
- * Clean the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
- *
- * (same as v4wb)
- */
-arm1020e_dma_clean_range:
- mov ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- bic r0, r0, #CACHE_DLINESIZE - 1
-1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
- add r0, r0, #CACHE_DLINESIZE
- cmp r0, r1
- blo 1b
-#endif
- mcr p15, 0, ip, c7, c10, 4 @ drain WB
- mov pc, lr
-
-/*
- * dma_flush_range(start, end)
- *
- * Clean and invalidate the specified virtual address range.
- *
- * - start - virtual start address
- * - end - virtual end address
- */
-ENTRY(arm1020e_dma_flush_range)
- mov ip, #0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- bic r0, r0, #CACHE_DLINESIZE - 1
-1: mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
- add r0, r0, #CACHE_DLINESIZE
- cmp r0, r1
- blo 1b
-#endif
- mcr p15, 0, ip, c7, c10, 4 @ drain WB
- mov pc, lr
-
-/*
- * dma_map_area(start, size, dir)
- * - start - kernel virtual start address
- * - size - size of region
- * - dir - DMA direction
- */
-ENTRY(arm1020e_dma_map_area)
- add r1, r1, r0
- cmp r2, #DMA_TO_DEVICE
- beq arm1020e_dma_clean_range
- bcs arm1020e_dma_inv_range
- b arm1020e_dma_flush_range
-ENDPROC(arm1020e_dma_map_area)
-
-/*
- * dma_unmap_area(start, size, dir)
- * - start - kernel virtual start address
- * - size - size of region
- * - dir - DMA direction
- */
-ENTRY(arm1020e_dma_unmap_area)
- mov pc, lr
-ENDPROC(arm1020e_dma_unmap_area)
-
- @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
- define_cache_functions arm1020e
-
- .align 5
-ENTRY(cpu_arm1020e_dcache_clean_area)
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- mov ip, #0
-1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
- add r0, r0, #CACHE_DLINESIZE
- subs r1, r1, #CACHE_DLINESIZE
- bhi 1b
-#endif
- mov pc, lr
-
-/* =============================== PageTable ============================== */
-
-/*
- * cpu_arm1020e_switch_mm(pgd)
- *
- * Set the translation base pointer to be as described by pgd.
- *
- * pgd: new page tables
- */
- .align 5
-ENTRY(cpu_arm1020e_switch_mm)
-#ifdef CONFIG_MMU
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- mcr p15, 0, r3, c7, c10, 4
- mov r1, #0xF @ 16 segments
-1: mov r3, #0x3F @ 64 entries
-2: mov ip, r3, LSL #26 @ shift up entry
- orr ip, ip, r1, LSL #5 @ shift in/up index
- mcr p15, 0, ip, c7, c14, 2 @ Clean & Inval DCache entry
- mov ip, #0
- subs r3, r3, #1
- cmp r3, #0
- bge 2b @ entries 3F to 0
- subs r1, r1, #1
- cmp r1, #0
- bge 1b @ segments 15 to 0
-
-#endif
- mov r1, #0
-#ifndef CONFIG_CPU_ICACHE_DISABLE
- mcr p15, 0, r1, c7, c5, 0 @ invalidate I cache
-#endif
- mcr p15, 0, r1, c7, c10, 4 @ drain WB
- mcr p15, 0, r0, c2, c0, 0 @ load page table pointer
- mcr p15, 0, r1, c8, c7, 0 @ invalidate I & D TLBs
-#endif
- mov pc, lr
-
-/*
- * cpu_arm1020e_set_pte(ptep, pte)
- *
- * Set a PTE and flush it out
- */
- .align 5
-ENTRY(cpu_arm1020e_set_pte_ext)
-#ifdef CONFIG_MMU
- armv3_set_pte_ext
- mov r0, r0
-#ifndef CONFIG_CPU_DCACHE_DISABLE
- mcr p15, 0, r0, c7, c10, 1 @ clean D entry
-#endif
-#endif /* CONFIG_MMU */
- mov pc, lr
-
- __CPUINIT
-
- .type __arm1020e_setup, #function
-__arm1020e_setup:
- mov r0, #0
- mcr p15, 0, r0, c7, c7 @ invalidate I,D caches on v4
- mcr p15, 0, r0, c7, c10, 4 @ drain write buffer on v4
-#ifdef CONFIG_MMU
- mcr p15, 0, r0, c8, c7 @ invalidate I,D TLBs on v4
-#endif
- adr r5, arm1020e_crval
- ldmia r5, {r5, r6}
- mrc p15, 0, r0, c1, c0 @ get control register v4
- bic r0, r0, r5
- orr r0, r0, r6
-#ifdef CONFIG_CPU_CACHE_ROUND_ROBIN
- orr r0, r0, #0x4000 @ .R.. .... .... ....
-#endif
- mov pc, lr
- .size __arm1020e_setup, . - __arm1020e_setup
-
- /*
- * R
- * .RVI ZFRS BLDP WCAM
- * .011 1001 ..11 0101
- */
- .type arm1020e_crval, #object
-arm1020e_crval:
- crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930
-
- __INITDATA
- @ define struct processor (see <asm/proc-fns.h> and proc-macros.S)
- define_processor_functions arm1020e, dabort=v4t_early_abort, pabort=legacy_pabort
-
- .section ".rodata"
-
- string cpu_arch_name, "armv5te"
- string cpu_elf_name, "v5"
- string cpu_arm1020e_name, "ARM1020E"
-
- .align
-
- .section ".proc.info.init", #alloc, #execinstr
-
- .type __arm1020e_proc_info,#object
-__arm1020e_proc_info:
- .long 0x4105a200 @ ARM 1020TE (Architecture v5TE)
- .long 0xff0ffff0
- .long PMD_TYPE_SECT | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- .long PMD_TYPE_SECT | \
- PMD_BIT4 | \
- PMD_SECT_AP_WRITE | \
- PMD_SECT_AP_READ
- b __arm1020e_setup
- .long cpu_arch_name
- .long cpu_elf_name
- .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_EDSP
- .long cpu_arm1020e_name
- .long arm1020e_processor_functions
- .long v4wbi_tlb_fns
- .long v4wb_user_fns
- .long arm1020e_cache_fns
- .size __arm1020e_proc_info, . - __arm1020e_proc_info
--
1.7.4.4
More information about the linux-arm-kernel
mailing list