[PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Maxime Ripard
maxime.ripard at free-electrons.com
Mon Nov 14 04:06:59 EST 2011
On 10/11/2011 18:35, Jonathan Cameron wrote:
> On 11/09/2011 10:19 AM, Maxime Ripard wrote:
>> Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
>> Cc: Patrice Vilchez <patrice.vilchez at atmel.com>
>> Cc: Jean-Christophe Plagniol-Villard <plagnioj at jcrosoft.com>
>> Cc: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
>>
> One little comment / query inline. I'm happy with this either way
> though. Beware as you are dependent on a series under review though
> and it's always possible little things in there might change!
Yes, I know.
Maybe it would be better if you took this patchset for that reason. I
guess you have more control over the move out of staging than AT91
maintaners have.
>> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> Acked-by: Jonathan Cameron <jic23 at cam.ac.uk>
>
>> ---
>> drivers/iio/adc/Kconfig | 6 +
>> drivers/iio/adc/Makefile | 4 +-
>> drivers/iio/adc/at91adc.c | 326 +++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 335 insertions(+), 1 deletions(-)
>> create mode 100644 drivers/iio/adc/at91adc.c
>>
>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>> index 3d97b21..74f4d9f 100644
>> --- a/drivers/iio/adc/Kconfig
>> +++ b/drivers/iio/adc/Kconfig
>> @@ -14,6 +14,12 @@ config IIO_AD799X
>> i2c analog to digital convertors (ADC). Provides direct access
>> via sysfs.
>>
>> +config IIO_AT91ADC
>> + tristate "Atmel AT91 ADC"
>> + depends on SYSFS && ARCH_AT91
>> + help
>> + Say yes here to build support for Atmel AT91 ADC.
>> +
>> config IIO_MAX1363
>> tristate "Maxim max1363 ADC driver"
>> depends on I2C
>> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
>> index c197334..776b56f 100644
>> --- a/drivers/iio/adc/Makefile
>> +++ b/drivers/iio/adc/Makefile
>> @@ -6,4 +6,6 @@ iio_ad799x-y := ad799x_core.o
>> obj-$(CONFIG_IIO_AD799X) += iio_ad799x.o
>>
>> iio_max1363-y := max1363_core.o
>> -obj-$(CONFIG_IIO_MAX1363) += iio_max1363.o
>> \ No newline at end of file
>> +obj-$(CONFIG_IIO_MAX1363) += iio_max1363.o
>> +
>> +obj-$(CONFIG_IIO_AT91ADC) += at91adc.o
>> diff --git a/drivers/iio/adc/at91adc.c b/drivers/iio/adc/at91adc.c
>> new file mode 100644
>> index 0000000..6aef5d6
>> --- /dev/null
>> +++ b/drivers/iio/adc/at91adc.c
>> @@ -0,0 +1,326 @@
>> +/*
>> + * Driver for the ADC present in the Atmel AT91 evaluation boards.
>> + *
>> + * Copyright 2011 Free Electrons
>> + *
>> + * Licensed under the GPLv2 or later.
>> + */
>> +
>> +#include <linux/bitmap.h>
>> +#include <linux/bitops.h>
>> +#include <linux/clk.h>
>> +#include <linux/err.h>
>> +#include <linux/io.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/jiffies.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/platform_device.h>
>> +#include <linux/slab.h>
>> +#include <linux/wait.h>
>> +
>> +#include <linux/iio/iio.h>
>> +
>> +#include <mach/at91_adc.h>
>> +#include <mach/board.h>
>> +
>> +struct at91adc_state {
>> + struct clk *clk;
>> + bool done;
>> + struct mutex lock;
>> + int irq;
>> + wait_queue_head_t wq_data_avail;
>> + u16 last_value;
>> + void __iomem *reg_base;
>> + unsigned int vref_mv;
>> +};
>> +
>> +static inline u32 at91adc_reg_read(struct at91adc_state *st, u8 reg)
>> +{
>> + return readl_relaxed(st->reg_base + reg);
>> +}
>> +
>> +static inline void at91adc_reg_write(struct at91adc_state *st, u8 reg, u32 val)
>> +{
>> + writel_relaxed(val, st->reg_base + reg);
>> +}
>> +
>> +static irqreturn_t at91adc_eoc_trigger(int irq, void *private)
>> +{
>> + int chan;
>> + struct iio_dev *idev = private;
>> + struct at91adc_state *st = iio_priv(idev);
>> + unsigned int status = at91adc_reg_read(st, AT91_ADC_SR);
>> +
>> + if (!(status & AT91_ADC_DRDY))
>> + return IRQ_HANDLED;
>> +
>> + for (chan = 0; chan < idev->num_channels; chan++)
> Given we know only one bit should be set, it really feels like there
> should be
> a cleaner way of doing this. Could it use find_first_bit(&status,
> idev->num_channels)?
> It kind of bypasses the defines though so it's far from clean in that sense.
>> + if (status & AT91_ADC_EOC(chan)) {
>
> The logic in here very much assumes that only one channel is being converted
> and the interrupt indicates that one of the channels has finished.
> Hence logically this st->done doesn't need to be in the loop.
>
>> + st->done = true;
>> + st->last_value = at91adc_reg_read(st,
>> + AT91_ADC_CHR(chan));
>> + }
>> +
>> + wake_up_interruptible(&st->wq_data_avail);
>> +
>> + return IRQ_HANDLED;
>> +}
>> +
>> +static int at91adc_channel_init(struct iio_dev *idev,
>> + struct at91_adc_data *pdata)
>> +{
>> + struct iio_chan_spec *chan_array;
>> + int bit, idx = 0;
>> +
>> + idev->num_channels = bitmap_weight(&(pdata->channels_used),
>> + pdata->num_channels);
>> + chan_array = kcalloc(idev->num_channels, sizeof(struct iio_chan_spec),
>> + GFP_KERNEL);
>> +
>> + if (chan_array == NULL)
>> + return -ENOMEM;
>> +
>> + for_each_set_bit(bit, &(pdata->channels_used), pdata->num_channels) {
>> + struct iio_chan_spec *chan = chan_array + idx;
>> + chan->type = IIO_VOLTAGE;
>> + chan->indexed = 1;
>> + chan->channel = bit;
>> + chan->scan_type.sign = 'u';
>> + chan->scan_type.realbits = 10;
>> + chan->info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT;
>> + ++idx;
>> + }
>> +
>> + idev->channels = chan_array;
>> + return idev->num_channels;
>> +}
>> +
>> +static void at91adc_channel_remove(struct iio_dev *idev)
>> +{
>> + kfree(idev->channels);
>> +}
>> +
>> +static int at91adc_read_raw(struct iio_dev *idev,
>> + struct iio_chan_spec const *chan,
>> + int *val, int *val2, long mask)
>> +{
>> + struct at91adc_state *st = iio_priv(idev);
>> + unsigned int scale_uv;
>> + short ret;
>> +
>> + switch (mask) {
>> + case 0:
>> + mutex_lock(&st->lock);
>> +
>> + at91adc_reg_write(st, AT91_ADC_CHER,
>> + AT91_ADC_CH(chan->channel));
>> + at91adc_reg_write(st, AT91_ADC_IER,
>> + AT91_ADC_EOC(chan->channel));
>> + at91adc_reg_write(st, AT91_ADC_CR, AT91_ADC_START);
>> +
>> + ret = wait_event_interruptible_timeout(st->wq_data_avail,
>> + st->done,
>> + msecs_to_jiffies(1000));
>> + if (ret == -ERESTARTSYS)
>> + break;
>> +
>> + *val = st->last_value;
>> +
>> + at91adc_reg_write(st, AT91_ADC_CHDR,
>> + AT91_ADC_CH(chan->channel));
>> + at91adc_reg_write(st, AT91_ADC_IDR,
>> + AT91_ADC_EOC(chan->channel));
>> +
>> + st->last_value = 0;
>> + st->done = false;
>> + mutex_unlock(&st->lock);
>> + return IIO_VAL_INT;
>> +
>> + case IIO_CHAN_INFO_SCALE:
>> + scale_uv = (st->vref_mv * 1000) >> chan->scan_type.realbits;
>> + *val = scale_uv / 1000;
>> + *val2 = (scale_uv % 1000) * 1000;
>> + return IIO_VAL_INT_PLUS_MICRO;
>> + default:
>> + break;
>> + }
>> + return -EINVAL;
>> +}
>> +
>> +static const struct iio_info at91adc_info = {
>> + .driver_module = THIS_MODULE,
>> + .read_raw = &at91adc_read_raw,
>> +};
>> +
>> +static int __devinit at91adc_probe(struct platform_device *pdev)
>> +{
>> + unsigned int prsc, mstrclk, ticks;
>> + int ret;
>> + struct iio_dev *idev;
>> + struct at91adc_state *st;
>> + struct resource *res;
>> + struct at91_adc_data *pdata = pdev->dev.platform_data;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + if (!res) {
>> + dev_err(&pdev->dev, "No resource defined\n");
>> + ret = -ENXIO;
>> + goto error_ret;
>> + }
>> +
>> + idev = iio_device_allocate(sizeof(struct at91adc_state));
>> + if (idev == NULL) {
>> + ret = -ENOMEM;
>> + goto error_ret;
>> + }
>> + platform_set_drvdata(pdev, idev);
>> +
>> + idev->dev.parent = &pdev->dev;
>> + idev->name = dev_name(&pdev->dev);
>> + idev->info = &at91adc_info;
>> +
>> + st = iio_priv(idev);
>> + st->irq = platform_get_irq(pdev, 0);
>> + if (st->irq < 0) {
>> + dev_err(&pdev->dev, "No IRQ ID is designated\n");
>> + ret = -ENODEV;
>> + goto error_free_device;
>> + }
>> +
>> + if (!request_mem_region(res->start, resource_size(res),
>> + "AT91 adc registers")) {
>> + dev_err(&pdev->dev, "Resources are unavailable.\n");
>> + ret = -EBUSY;
>> + goto error_free_device;
>> + }
>> +
>> + st->reg_base = ioremap(res->start, resource_size(res));
>> + if (!st->reg_base) {
>> + dev_err(&pdev->dev, "Failed to map registers.\n");
>> + ret = -ENOMEM;
>> + goto error_release_mem;
>> + }
>> +
>> + /*
>> + * Disable all IRQs before setting up the handler
>> + */
>> + at91adc_reg_write(st, AT91_ADC_CR, AT91_ADC_SWRST);
>> + at91adc_reg_write(st, AT91_ADC_IDR, 0xFFFFFFFF);
>> + ret = request_irq(st->irq,
>> + at91adc_eoc_trigger, 0, pdev->dev.driver->name, idev);
>> + if (ret) {
>> + dev_err(&pdev->dev, "Failed to allocate IRQ.\n");
>> + goto error_unmap_reg;
>> + }
>> +
>> + st->clk = clk_get(&pdev->dev, "adc_clk");
>> + if (IS_ERR(st->clk)) {
>> + dev_err(&pdev->dev, "Failed to get the clock.\n");
>> + ret = PTR_ERR(st->clk);
>> + goto error_free_irq;
>> + }
>> +
>> + clk_enable(st->clk);
>> + mstrclk = clk_get_rate(st->clk);
>> +
>> + if (!pdata) {
>> + dev_err(&pdev->dev, "No platform data available.\n");
>> + ret = -EINVAL;
>> + goto error_free_clk;
>> + }
>> +
>> + if (!pdata->adc_clock) {
>> + dev_err(&pdev->dev, "No ADCClock available.\n");
>> + ret = -EINVAL;
>> + goto error_free_clk;
>> + }
>> +
>> + /*
>> + * Prescaler rate computation using the formula from the Atmel's
>> + * datasheet : ADC Clock = MCK / ((Prescaler + 1) * 2), ADC Clock being
>> + * specified by the electrical characteristics of the board.
>> + */
>> + prsc = (mstrclk / (2 * pdata->adc_clock)) - 1;
>> +
>> + if (!pdata->startup_time) {
>> + dev_err(&pdev->dev, "No startup time available.\n");
>> + ret = -EINVAL;
>> + goto error_free_clk;
>> + }
>> +
>> + /*
>> + * Number of ticks needed to cover the startup time of the ADC as
>> + * defined in the electrical characteristics of the board, divided by 8.
>> + * The formula thus is : Startup Time = (ticks + 1) * 8 / ADC Clock
>> + */
>> + ticks = round_up((pdata->startup_time * pdata->adc_clock /
>> + 1000000) - 1, 8) / 8;
>> + at91adc_reg_write(st, AT91_ADC_MR,
>> + (AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL) |
>> + (AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP));
>> +
>> + /* Setup the ADC channels available on the board */
>> + ret = at91adc_channel_init(idev, pdata);
>> + if (ret < 0)
>> + goto error_free_clk;
>> +
>> + init_waitqueue_head(&st->wq_data_avail);
>> + mutex_init(&st->lock);
>> +
>> + st->vref_mv = pdata->vref;
>> +
>> + ret = iio_device_register(idev);
>> + if (ret < 0)
>> + goto error_free_channels;
>> +
>> + return 0;
>> +
>> +error_free_channels:
>> + at91adc_channel_remove(idev);
>> +error_free_clk:
>> + clk_disable(st->clk);
>> + clk_put(st->clk);
>> +error_free_irq:
>> + free_irq(st->irq, st);
>> +error_unmap_reg:
>> + iounmap(st->reg_base);
>> +error_release_mem:
>> + release_mem_region(res->start, resource_size(res));
>> +error_free_device:
>> + iio_device_free(idev);
>> +error_ret:
>> + return ret;
>> +}
>> +
>> +static int __devexit at91adc_remove(struct platform_device *pdev)
>> +{
>> + struct iio_dev *idev = platform_get_drvdata(pdev);
>> + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + struct at91adc_state *st = iio_priv(idev);
>> +
>> + iio_device_unregister(idev);
>> + at91adc_channel_remove(idev);
>> + clk_disable(st->clk);
>> + clk_put(st->clk);
>> + free_irq(st->irq, idev);
>> + iounmap(st->reg_base);
>> + release_mem_region(res->start, resource_size(res));
>> + iio_device_free(idev);
>> +
>> + return 0;
>> +}
>> +
>> +static struct platform_driver at91adc_driver = {
>> + .probe = at91adc_probe,
>> + .remove = __devexit_p(at91adc_remove),
>> + .driver = {
>> + .name = "at91adc",
>> + },
>> +};
>> +
>> +module_platform_driver(at91adc_driver);
>> +
>> +MODULE_LICENSE("GPL");
>> +MODULE_DESCRIPTION("Atmel AT91 ADC Driver");
>> +MODULE_AUTHOR("Maxime Ripard <maxime.ripard at free-electrons.com>");
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
More information about the linux-arm-kernel
mailing list