[PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.
Maxime Ripard
maxime.ripard at free-electrons.com
Mon Nov 14 04:59:46 EST 2011
On 11/11/2011 13:34, Jonathan Cameron wrote:
> On 11/10/2011 05:35 PM, Jonathan Cameron wrote:
>> On 11/09/2011 10:19 AM, Maxime Ripard wrote:
>>> Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
>>> Cc: Patrice Vilchez <patrice.vilchez at atmel.com>
>>> Cc: Jean-Christophe Plagniol-Villard <plagnioj at jcrosoft.com>
>>> Cc: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
>>>
>> One little comment / query inline. I'm happy with this either way
>> though. Beware as you are dependent on a series under review though
>> and it's always possible little things in there might change!
>>
>>> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
>> Acked-by: Jonathan Cameron <jic23 at cam.ac.uk>
>>
>>> ---
>>> drivers/iio/adc/Kconfig | 6 +
>>> drivers/iio/adc/Makefile | 4 +-
>>> drivers/iio/adc/at91adc.c | 326 +++++++++++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 335 insertions(+), 1 deletions(-)
>>> create mode 100644 drivers/iio/adc/at91adc.c
>>>
>>> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>>> index 3d97b21..74f4d9f 100644
>>> --- a/drivers/iio/adc/Kconfig
>>> +++ b/drivers/iio/adc/Kconfig
>>> @@ -14,6 +14,12 @@ config IIO_AD799X
>>> i2c analog to digital convertors (ADC). Provides direct access
>>> via sysfs.
>>>
>>> +config IIO_AT91ADC
>>> + tristate "Atmel AT91 ADC"
>>> + depends on SYSFS && ARCH_AT91
>>> + help
>>> + Say yes here to build support for Atmel AT91 ADC.
>>> +
>>> config IIO_MAX1363
>>> tristate "Maxim max1363 ADC driver"
>>> depends on I2C
>>> diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
>>> index c197334..776b56f 100644
>>> --- a/drivers/iio/adc/Makefile
>>> +++ b/drivers/iio/adc/Makefile
>>> @@ -6,4 +6,6 @@ iio_ad799x-y := ad799x_core.o
>>> obj-$(CONFIG_IIO_AD799X) += iio_ad799x.o
>>>
>>> iio_max1363-y := max1363_core.o
>>> -obj-$(CONFIG_IIO_MAX1363) += iio_max1363.o
>>> \ No newline at end of file
>>> +obj-$(CONFIG_IIO_MAX1363) += iio_max1363.o
>>> +
>>> +obj-$(CONFIG_IIO_AT91ADC) += at91adc.o
>>> diff --git a/drivers/iio/adc/at91adc.c b/drivers/iio/adc/at91adc.c
>>> new file mode 100644
>>> index 0000000..6aef5d6
>>> --- /dev/null
>>> +++ b/drivers/iio/adc/at91adc.c
>>> @@ -0,0 +1,326 @@
>>> +/*
>>> + * Driver for the ADC present in the Atmel AT91 evaluation boards.
>>> + *
>>> + * Copyright 2011 Free Electrons
>>> + *
>>> + * Licensed under the GPLv2 or later.
>>> + */
>>> +
>>> +#include <linux/bitmap.h>
>>> +#include <linux/bitops.h>
>>> +#include <linux/clk.h>
>>> +#include <linux/err.h>
>>> +#include <linux/io.h>
>>> +#include <linux/interrupt.h>
>>> +#include <linux/jiffies.h>
>>> +#include <linux/kernel.h>
>>> +#include <linux/module.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/slab.h>
>>> +#include <linux/wait.h>
>>> +
>>> +#include <linux/iio/iio.h>
>>> +
>>> +#include <mach/at91_adc.h>
>>> +#include <mach/board.h>
>>> +
>>> +struct at91adc_state {
>>> + struct clk *clk;
>>> + bool done;
>>> + struct mutex lock;
>>> + int irq;
>>> + wait_queue_head_t wq_data_avail;
>>> + u16 last_value;
>>> + void __iomem *reg_base;
>>> + unsigned int vref_mv;
>>> +};
>>> +
>>> +static inline u32 at91adc_reg_read(struct at91adc_state *st, u8 reg)
>>> +{
>>> + return readl_relaxed(st->reg_base + reg);
>>> +}
>>> +
>>> +static inline void at91adc_reg_write(struct at91adc_state *st, u8 reg, u32 val)
>>> +{
>>> + writel_relaxed(val, st->reg_base + reg);
>>> +}
>>> +
>>> +static irqreturn_t at91adc_eoc_trigger(int irq, void *private)
>>> +{
>>> + int chan;
>>> + struct iio_dev *idev = private;
>>> + struct at91adc_state *st = iio_priv(idev);
>>> + unsigned int status = at91adc_reg_read(st, AT91_ADC_SR);
>>> +
>>> + if (!(status & AT91_ADC_DRDY))
>>> + return IRQ_HANDLED;
>>> +
>>> + for (chan = 0; chan < idev->num_channels; chan++)
>> Given we know only one bit should be set, it really feels like there
>> should be
>> a cleaner way of doing this. Could it use find_first_bit(&status,
>> idev->num_channels)?
>> It kind of bypasses the defines though so it's far from clean in that sense.
>>> + if (status & AT91_ADC_EOC(chan)) {
>>
>> The logic in here very much assumes that only one channel is being converted
>> and the interrupt indicates that one of the channels has finished.
>> Hence logically this st->done doesn't need to be in the loop.
>>
> Having had a look at the datasheet, could you just check against the
> whole mask and use the lastdata converted register? Should under
> current conditions always give you the right thing I think?
You're right, It will be more consistent and avoid to loop over each
channels. I send a new version of the patchset.
>>> + st->done = true;
>>> + st->last_value = at91adc_reg_read(st,
>>> + AT91_ADC_CHR(chan));
>>> + }
>>> +
>>> + wake_up_interruptible(&st->wq_data_avail);
>>> +
>>> + return IRQ_HANDLED;
>>> +}
>>> +
>>> +static int at91adc_channel_init(struct iio_dev *idev,
>>> + struct at91_adc_data *pdata)
>>> +{
>>> + struct iio_chan_spec *chan_array;
>>> + int bit, idx = 0;
>>> +
>>> + idev->num_channels = bitmap_weight(&(pdata->channels_used),
>>> + pdata->num_channels);
>>> + chan_array = kcalloc(idev->num_channels, sizeof(struct iio_chan_spec),
>>> + GFP_KERNEL);
>>> +
>>> + if (chan_array == NULL)
>>> + return -ENOMEM;
>>> +
>>> + for_each_set_bit(bit, &(pdata->channels_used), pdata->num_channels) {
>>> + struct iio_chan_spec *chan = chan_array + idx;
>>> + chan->type = IIO_VOLTAGE;
>>> + chan->indexed = 1;
>>> + chan->channel = bit;
>>> + chan->scan_type.sign = 'u';
>>> + chan->scan_type.realbits = 10;
>>> + chan->info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT;
>>> + ++idx;
>>> + }
>>> +
>>> + idev->channels = chan_array;
>>> + return idev->num_channels;
>>> +}
>>> +
>>> +static void at91adc_channel_remove(struct iio_dev *idev)
>>> +{
>>> + kfree(idev->channels);
>>> +}
>>> +
>>> +static int at91adc_read_raw(struct iio_dev *idev,
>>> + struct iio_chan_spec const *chan,
>>> + int *val, int *val2, long mask)
>>> +{
>>> + struct at91adc_state *st = iio_priv(idev);
>>> + unsigned int scale_uv;
>>> + short ret;
>>> +
>>> + switch (mask) {
>>> + case 0:
>>> + mutex_lock(&st->lock);
>>> +
>>> + at91adc_reg_write(st, AT91_ADC_CHER,
>>> + AT91_ADC_CH(chan->channel));
>>> + at91adc_reg_write(st, AT91_ADC_IER,
>>> + AT91_ADC_EOC(chan->channel));
>>> + at91adc_reg_write(st, AT91_ADC_CR, AT91_ADC_START);
>>> +
>>> + ret = wait_event_interruptible_timeout(st->wq_data_avail,
>>> + st->done,
>>> + msecs_to_jiffies(1000));
>>> + if (ret == -ERESTARTSYS)
>>> + break;
>>> +
>>> + *val = st->last_value;
>>> +
>>> + at91adc_reg_write(st, AT91_ADC_CHDR,
>>> + AT91_ADC_CH(chan->channel));
>>> + at91adc_reg_write(st, AT91_ADC_IDR,
>>> + AT91_ADC_EOC(chan->channel));
>>> +
>>> + st->last_value = 0;
>>> + st->done = false;
>>> + mutex_unlock(&st->lock);
>>> + return IIO_VAL_INT;
>>> +
>>> + case IIO_CHAN_INFO_SCALE:
>>> + scale_uv = (st->vref_mv * 1000) >> chan->scan_type.realbits;
>>> + *val = scale_uv / 1000;
>>> + *val2 = (scale_uv % 1000) * 1000;
>>> + return IIO_VAL_INT_PLUS_MICRO;
>>> + default:
>>> + break;
>>> + }
>>> + return -EINVAL;
>>> +}
>>> +
>>> +static const struct iio_info at91adc_info = {
>>> + .driver_module = THIS_MODULE,
>>> + .read_raw = &at91adc_read_raw,
>>> +};
>>> +
>>> +static int __devinit at91adc_probe(struct platform_device *pdev)
>>> +{
>>> + unsigned int prsc, mstrclk, ticks;
>>> + int ret;
>>> + struct iio_dev *idev;
>>> + struct at91adc_state *st;
>>> + struct resource *res;
>>> + struct at91_adc_data *pdata = pdev->dev.platform_data;
>>> +
>>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> + if (!res) {
>>> + dev_err(&pdev->dev, "No resource defined\n");
>>> + ret = -ENXIO;
>>> + goto error_ret;
>>> + }
>>> +
>>> + idev = iio_device_allocate(sizeof(struct at91adc_state));
>>> + if (idev == NULL) {
>>> + ret = -ENOMEM;
>>> + goto error_ret;
>>> + }
>>> + platform_set_drvdata(pdev, idev);
>>> +
>>> + idev->dev.parent = &pdev->dev;
>>> + idev->name = dev_name(&pdev->dev);
>>> + idev->info = &at91adc_info;
>>> +
>>> + st = iio_priv(idev);
>>> + st->irq = platform_get_irq(pdev, 0);
>>> + if (st->irq < 0) {
>>> + dev_err(&pdev->dev, "No IRQ ID is designated\n");
>>> + ret = -ENODEV;
>>> + goto error_free_device;
>>> + }
>>> +
>>> + if (!request_mem_region(res->start, resource_size(res),
>>> + "AT91 adc registers")) {
>>> + dev_err(&pdev->dev, "Resources are unavailable.\n");
>>> + ret = -EBUSY;
>>> + goto error_free_device;
>>> + }
>>> +
>>> + st->reg_base = ioremap(res->start, resource_size(res));
>>> + if (!st->reg_base) {
>>> + dev_err(&pdev->dev, "Failed to map registers.\n");
>>> + ret = -ENOMEM;
>>> + goto error_release_mem;
>>> + }
>>> +
>>> + /*
>>> + * Disable all IRQs before setting up the handler
>>> + */
>>> + at91adc_reg_write(st, AT91_ADC_CR, AT91_ADC_SWRST);
>>> + at91adc_reg_write(st, AT91_ADC_IDR, 0xFFFFFFFF);
>>> + ret = request_irq(st->irq,
>>> + at91adc_eoc_trigger, 0, pdev->dev.driver->name, idev);
>>> + if (ret) {
>>> + dev_err(&pdev->dev, "Failed to allocate IRQ.\n");
>>> + goto error_unmap_reg;
>>> + }
>>> +
>>> + st->clk = clk_get(&pdev->dev, "adc_clk");
>>> + if (IS_ERR(st->clk)) {
>>> + dev_err(&pdev->dev, "Failed to get the clock.\n");
>>> + ret = PTR_ERR(st->clk);
>>> + goto error_free_irq;
>>> + }
>>> +
>>> + clk_enable(st->clk);
>>> + mstrclk = clk_get_rate(st->clk);
>>> +
>>> + if (!pdata) {
>>> + dev_err(&pdev->dev, "No platform data available.\n");
>>> + ret = -EINVAL;
>>> + goto error_free_clk;
>>> + }
>>> +
>>> + if (!pdata->adc_clock) {
>>> + dev_err(&pdev->dev, "No ADCClock available.\n");
>>> + ret = -EINVAL;
>>> + goto error_free_clk;
>>> + }
>>> +
>>> + /*
>>> + * Prescaler rate computation using the formula from the Atmel's
>>> + * datasheet : ADC Clock = MCK / ((Prescaler + 1) * 2), ADC Clock being
>>> + * specified by the electrical characteristics of the board.
>>> + */
>>> + prsc = (mstrclk / (2 * pdata->adc_clock)) - 1;
>>> +
>>> + if (!pdata->startup_time) {
>>> + dev_err(&pdev->dev, "No startup time available.\n");
>>> + ret = -EINVAL;
>>> + goto error_free_clk;
>>> + }
>>> +
>>> + /*
>>> + * Number of ticks needed to cover the startup time of the ADC as
>>> + * defined in the electrical characteristics of the board, divided by 8.
>>> + * The formula thus is : Startup Time = (ticks + 1) * 8 / ADC Clock
>>> + */
>>> + ticks = round_up((pdata->startup_time * pdata->adc_clock /
>>> + 1000000) - 1, 8) / 8;
>>> + at91adc_reg_write(st, AT91_ADC_MR,
>>> + (AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL) |
>>> + (AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP));
>>> +
>>> + /* Setup the ADC channels available on the board */
>>> + ret = at91adc_channel_init(idev, pdata);
>>> + if (ret < 0)
>>> + goto error_free_clk;
>>> +
>>> + init_waitqueue_head(&st->wq_data_avail);
>>> + mutex_init(&st->lock);
>>> +
>>> + st->vref_mv = pdata->vref;
>>> +
>>> + ret = iio_device_register(idev);
>>> + if (ret < 0)
>>> + goto error_free_channels;
>>> +
>>> + return 0;
>>> +
>>> +error_free_channels:
>>> + at91adc_channel_remove(idev);
>>> +error_free_clk:
>>> + clk_disable(st->clk);
>>> + clk_put(st->clk);
>>> +error_free_irq:
>>> + free_irq(st->irq, st);
>>> +error_unmap_reg:
>>> + iounmap(st->reg_base);
>>> +error_release_mem:
>>> + release_mem_region(res->start, resource_size(res));
>>> +error_free_device:
>>> + iio_device_free(idev);
>>> +error_ret:
>>> + return ret;
>>> +}
>>> +
>>> +static int __devexit at91adc_remove(struct platform_device *pdev)
>>> +{
>>> + struct iio_dev *idev = platform_get_drvdata(pdev);
>>> + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>>> + struct at91adc_state *st = iio_priv(idev);
>>> +
>>> + iio_device_unregister(idev);
>>> + at91adc_channel_remove(idev);
>>> + clk_disable(st->clk);
>>> + clk_put(st->clk);
>>> + free_irq(st->irq, idev);
>>> + iounmap(st->reg_base);
>>> + release_mem_region(res->start, resource_size(res));
>>> + iio_device_free(idev);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static struct platform_driver at91adc_driver = {
>>> + .probe = at91adc_probe,
>>> + .remove = __devexit_p(at91adc_remove),
>>> + .driver = {
>>> + .name = "at91adc",
>>> + },
>>> +};
>>> +
>>> +module_platform_driver(at91adc_driver);
>>> +
>>> +MODULE_LICENSE("GPL");
>>> +MODULE_DESCRIPTION("Atmel AT91 ADC Driver");
>>> +MODULE_AUTHOR("Maxime Ripard <maxime.ripard at free-electrons.com>");
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
More information about the linux-arm-kernel
mailing list