[PATCH 28/41] ARM: restart: pxa: use new restart hook
Russell King - ARM Linux
linux at arm.linux.org.uk
Sun Nov 6 12:49:28 EST 2011
Hook these platforms restart code into the new restart hook rather
than using arch_reset().
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
arch/arm/mach-pxa/balloon3.c | 1 +
arch/arm/mach-pxa/capc7117.c | 3 ++-
arch/arm/mach-pxa/cm-x2xx.c | 1 +
arch/arm/mach-pxa/cm-x300.c | 1 +
arch/arm/mach-pxa/colibri-pxa270.c | 2 ++
arch/arm/mach-pxa/colibri-pxa300.c | 1 +
arch/arm/mach-pxa/colibri-pxa320.c | 1 +
arch/arm/mach-pxa/corgi.c | 8 +++++---
arch/arm/mach-pxa/csb726.c | 1 +
arch/arm/mach-pxa/em-x270.c | 2 ++
arch/arm/mach-pxa/eseries.c | 6 ++++++
arch/arm/mach-pxa/ezx.c | 6 ++++++
arch/arm/mach-pxa/generic.h | 2 ++
arch/arm/mach-pxa/gumstix.c | 1 +
arch/arm/mach-pxa/h5000.c | 1 +
arch/arm/mach-pxa/himalaya.c | 1 +
arch/arm/mach-pxa/hx4700.c | 1 +
arch/arm/mach-pxa/icontrol.c | 3 ++-
arch/arm/mach-pxa/idp.c | 1 +
arch/arm/mach-pxa/include/mach/system.h | 10 +++-------
arch/arm/mach-pxa/littleton.c | 1 +
arch/arm/mach-pxa/lpd270.c | 1 +
arch/arm/mach-pxa/lubbock.c | 1 +
arch/arm/mach-pxa/magician.c | 1 +
arch/arm/mach-pxa/mainstone.c | 1 +
arch/arm/mach-pxa/mioa701.c | 6 +++---
arch/arm/mach-pxa/mp900.c | 1 +
arch/arm/mach-pxa/palmld.c | 3 ++-
arch/arm/mach-pxa/palmt5.c | 3 ++-
arch/arm/mach-pxa/palmtc.c | 3 ++-
arch/arm/mach-pxa/palmte2.c | 3 ++-
arch/arm/mach-pxa/palmtreo.c | 2 ++
arch/arm/mach-pxa/palmtx.c | 3 ++-
arch/arm/mach-pxa/palmz72.c | 3 ++-
arch/arm/mach-pxa/pcm027.c | 1 +
arch/arm/mach-pxa/poodle.c | 3 ++-
arch/arm/mach-pxa/raumfeld.c | 3 +++
arch/arm/mach-pxa/reset.c | 5 ++++-
arch/arm/mach-pxa/saar.c | 1 +
arch/arm/mach-pxa/saarb.c | 1 +
arch/arm/mach-pxa/spitz.c | 6 ++++--
arch/arm/mach-pxa/stargate2.c | 2 ++
arch/arm/mach-pxa/tavorevb.c | 1 +
arch/arm/mach-pxa/tavorevb3.c | 1 +
arch/arm/mach-pxa/tosa.c | 4 ++--
arch/arm/mach-pxa/trizeps4.c | 2 ++
arch/arm/mach-pxa/viper.c | 1 +
arch/arm/mach-pxa/vpac270.c | 3 ++-
arch/arm/mach-pxa/xcep.c | 1 +
arch/arm/mach-pxa/z2.c | 1 +
arch/arm/mach-pxa/zeus.c | 1 +
arch/arm/mach-pxa/zylonite.c | 1 +
52 files changed, 95 insertions(+), 28 deletions(-)
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index fc0b854..5e25e17 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -829,4 +829,5 @@ MACHINE_START(BALLOON3, "Balloon3")
.timer = &pxa_timer,
.init_machine = balloon3_init,
.atag_offset = 0x100,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c
index 4efc16d..c2f0be0 100644
--- a/arch/arm/mach-pxa/capc7117.c
+++ b/arch/arm/mach-pxa/capc7117.c
@@ -153,5 +153,6 @@ MACHINE_START(CAPC7117,
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
- .init_machine = capc7117_init
+ .init_machine = capc7117_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index f2e4190..ec170a5 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -524,4 +524,5 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX")
#ifdef CONFIG_PCI
.dma_zone_size = SZ_64M,
#endif
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 3a7387f..dfd51d7 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -857,4 +857,5 @@ MACHINE_START(CM_X300, "CM-X300 module")
.timer = &pxa_timer,
.init_machine = cm_x300_init,
.fixup = cm_x300_fixup,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 7db6646..17a29be 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -312,6 +312,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
@@ -321,5 +322,6 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index c825e8b..c01059a 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -189,5 +189,6 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300")
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index 692e1ff..6cc3caa 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -259,5 +259,6 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320")
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 3e9483b..66faaaf 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -654,7 +654,7 @@ static void corgi_poweroff(void)
/* Green LED off tells the bootloader to halt */
gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
- arm_machine_restart('h', NULL);
+ pxa_restart('h', NULL);
}
static void corgi_restart(char mode, const char *cmd)
@@ -663,13 +663,12 @@ static void corgi_restart(char mode, const char *cmd)
/* Green LED on tells the bootloader to reboot */
gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
- arm_machine_restart('h', cmd);
+ pxa_restart('h', cmd);
}
static void __init corgi_init(void)
{
pm_power_off = corgi_poweroff;
- arm_pm_restart = corgi_restart;
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR |= PCFR_OPDE;
@@ -725,6 +724,7 @@ MACHINE_START(CORGI, "SHARP Corgi")
.handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
+ .restart = corgi_restart,
MACHINE_END
#endif
@@ -736,6 +736,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd")
.handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
+ .restart = corgi_restart,
MACHINE_END
#endif
@@ -747,6 +748,7 @@ MACHINE_START(HUSKY, "SHARP Husky")
.handle_irq = pxa25x_handle_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
+ .restart = corgi_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 5e2cf39..fb5a51d 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -278,4 +278,5 @@ MACHINE_START(CSB726, "Cogent CSB726")
.handle_irq = pxa27x_handle_irq,
.init_machine = csb726_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 94acc0b..bd396ba 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1305,6 +1305,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
+ .restart = pxa_restart,
MACHINE_END
MACHINE_START(EXEDA, "Compulab eXeda")
@@ -1314,4 +1315,5 @@ MACHINE_START(EXEDA, "Compulab eXeda")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = em_x270_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 8e697dd..8cafafa 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -196,6 +196,7 @@ MACHINE_START(E330, "Toshiba e330")
.fixup = eseries_fixup,
.init_machine = e330_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -246,6 +247,7 @@ MACHINE_START(E350, "Toshiba e350")
.fixup = eseries_fixup,
.init_machine = e350_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -369,6 +371,7 @@ MACHINE_START(E400, "Toshiba e400")
.fixup = eseries_fixup,
.init_machine = e400_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -558,6 +561,7 @@ MACHINE_START(E740, "Toshiba e740")
.fixup = eseries_fixup,
.init_machine = e740_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -750,6 +754,7 @@ MACHINE_START(E750, "Toshiba e750")
.fixup = eseries_fixup,
.init_machine = e750_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -955,5 +960,6 @@ MACHINE_START(E800, "Toshiba e800")
.fixup = eseries_fixup,
.init_machine = e800_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 8308eee..15ab253 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -804,6 +804,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a780_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -870,6 +871,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e680_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -936,6 +938,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a1200_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1127,6 +1130,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = a910_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1193,6 +1197,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e6_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1233,5 +1238,6 @@ MACHINE_START(EZX_E2, "Motorola EZX E2")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = e2_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 92a2e85..0d729e6 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -57,3 +57,5 @@ void __init pxa_set_ffuart_info(void *info);
void __init pxa_set_btuart_info(void *info);
void __init pxa_set_stuart_info(void *info);
void __init pxa_set_hwuart_info(void *info);
+
+void pxa_restart(char, const char *);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 9c8208c..03e5e0b 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -239,4 +239,5 @@ MACHINE_START(GUMSTIX, "Gumstix")
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = gumstix_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index 4b5e110..fde6b4c 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -209,4 +209,5 @@ MACHINE_START(H5400, "HP iPAQ H5000")
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = h5000_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index f2c3245..26d069a 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -164,4 +164,5 @@ MACHINE_START(HIMALAYA, "HTC Himalaya")
.handle_irq = pxa25x_handle_irq,
.init_machine = himalaya_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 6f6368e..ce16bda 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -845,4 +845,5 @@ MACHINE_START(H4700, "HP iPAQ HX4700")
.handle_irq = pxa27x_handle_irq,
.init_machine = hx4700_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c
index f78d5db..e239b82 100644
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -196,5 +196,6 @@ MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM")
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
- .init_machine = icontrol_init
+ .init_machine = icontrol_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index ddf20e5..fbabd84 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -199,4 +199,5 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = idp_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
index d1fce8b..85494ff 100644
--- a/arch/arm/mach-pxa/include/mach/system.h
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -9,15 +9,11 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-
-#include <asm/proc-fns.h>
-#include "hardware.h"
-#include "pxa2xx-regs.h"
-
static inline void arch_idle(void)
{
cpu_do_idle();
}
-
-void arch_reset(char mode, const char *cmd);
+static inline void arch_reset(char mode, const char *cmd)
+{
+}
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 0037e57..1799a8e 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -444,4 +444,5 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = littleton_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1dd5302..6119c01 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -505,4 +505,5 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = lpd270_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index c48ce6d..4b7a528 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -556,4 +556,5 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = lubbock_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 4b796c3..4e6774f 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -760,4 +760,5 @@ MACHINE_START(MAGICIAN, "HTC Magician")
.handle_irq = pxa27x_handle_irq,
.init_machine = magician_init,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 0567d39..ca14555 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -622,4 +622,5 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = mainstone_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 4f47a76..924a3b5 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -696,13 +696,13 @@ static void mioa701_machine_exit(void);
static void mioa701_poweroff(void)
{
mioa701_machine_exit();
- arm_machine_restart('s', NULL);
+ pxa_restart('s', NULL);
}
static void mioa701_restart(char c, const char *cmd)
{
mioa701_machine_exit();
- arm_machine_restart('s', cmd);
+ pxa_restart('s', cmd);
}
static struct gpio global_gpios[] = {
@@ -734,7 +734,6 @@ static void __init mioa701_machine_init(void)
pxa_set_udc_info(&mioa701_udc_info);
pxa_set_ac97_info(&mioa701_ac97_info);
pm_power_off = mioa701_poweroff;
- arm_pm_restart = mioa701_restart;
platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init();
@@ -758,4 +757,5 @@ MACHINE_START(MIOA701, "MIO A701")
.handle_irq = &pxa27x_handle_irq,
.init_machine = mioa701_machine_init,
.timer = &pxa_timer,
+ .restart = mioa701_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index 4af5d51..169bf8f 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -98,5 +98,6 @@ MACHINE_START(NEC_MP900, "MobilePro900/C")
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.init_machine = mp900c_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 3d4a281..1fa80f4f 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -347,5 +347,6 @@ MACHINE_START(PALMLD, "Palm LifeDrive")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmld_init
+ .init_machine = palmld_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 99d6bcf..5ba1431 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -208,5 +208,6 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmt5_init
+ .init_machine = palmt5_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 6ec7cae..e4dd719 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -542,5 +542,6 @@ MACHINE_START(PALMTC, "Palm Tungsten|C")
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmtc_init
+ .init_machine = palmtc_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 9376da0..5ebf49acb 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -361,5 +361,6 @@ MACHINE_START(PALMTE2, "Palm Tungsten|E2")
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmte2_init
+ .init_machine = palmte2_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c
index 94e9708..ec82491 100644
--- a/arch/arm/mach-pxa/palmtreo.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -452,6 +452,7 @@ MACHINE_START(TREO680, "Palm Treo 680")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = treo680_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -464,5 +465,6 @@ MACHINE_START(CENTRO, "Palm Centro 685")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = centro_init,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 4e3e459..6170d76 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -369,5 +369,6 @@ MACHINE_START(PALMTX, "Palm T|X")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmtx_init
+ .init_machine = palmtx_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 68e18ba..b2dff9d 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -404,5 +404,6 @@ MACHINE_START(PALMZ72, "Palm Zire72")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = palmz72_init
+ .init_machine = palmz72_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 0b825a3..fe90544 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -265,4 +265,5 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = pcm027_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 1c597ad..7e054d4 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -416,7 +416,7 @@ static struct i2c_board_info __initdata poodle_i2c_devices[] = {
static void poodle_poweroff(void)
{
- arm_machine_restart('h', NULL);
+ pxa_restart('h', NULL);
}
static void __init poodle_init(void)
@@ -465,4 +465,5 @@ MACHINE_START(POODLE, "SHARP Poodle")
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = poodle_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 6810cdd..697cbcd 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -1092,6 +1092,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1103,6 +1104,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1114,5 +1116,6 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
.init_irq = pxa3xx_init_irq,
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
index b8bcda1..c8497b0 100644
--- a/arch/arm/mach-pxa/reset.c
+++ b/arch/arm/mach-pxa/reset.c
@@ -81,8 +81,11 @@ static void do_hw_reset(void)
OSMR3 = OSCR + 368640; /* ... in 100 ms */
}
-void arch_reset(char mode, const char *cmd)
+void pxa_restart(char mode, const char *cmd)
{
+ local_irq_disable();
+ local_fiq_disable();
+
clear_reset_status(RESET_STATUS_ALL);
switch (mode) {
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index fc2c1e0..8787070 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -602,4 +602,5 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = saar_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c
index 3e999e3..b6dbaca 100644
--- a/arch/arm/mach-pxa/saarb.c
+++ b/arch/arm/mach-pxa/saarb.c
@@ -111,5 +111,6 @@ MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)")
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = saarb_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index f5bafcc..d8d089e 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -925,7 +925,7 @@ static inline void spitz_i2c_init(void) {}
******************************************************************************/
static void spitz_poweroff(void)
{
- arm_machine_restart('g', NULL);
+ pxa_restart('g', NULL);
}
static void spitz_restart(char mode, const char *cmd)
@@ -942,7 +942,6 @@ static void __init spitz_init(void)
{
init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
pm_power_off = spitz_poweroff;
- arm_pm_restart = spitz_restart;
PMCR = 0x00;
@@ -988,6 +987,7 @@ MACHINE_START(SPITZ, "SHARP Spitz")
.handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
+ .restart = spitz_restart,
MACHINE_END
#endif
@@ -1000,6 +1000,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi")
.handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
+ .restart = spitz_restart,
MACHINE_END
#endif
@@ -1012,5 +1013,6 @@ MACHINE_START(AKITA, "SHARP Akita")
.handle_irq = pxa27x_handle_irq,
.init_machine = spitz_init,
.timer = &pxa_timer,
+ .restart = spitz_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 4c9a48b..80d7f23 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -1005,6 +1005,7 @@ MACHINE_START(INTELMOTE2, "IMOTE 2")
.timer = &pxa_timer,
.init_machine = imote2_init,
.atag_offset = 0x100,
+ .restart = pxa_restart,
MACHINE_END
#endif
@@ -1017,5 +1018,6 @@ MACHINE_START(STARGATE2, "Stargate 2")
.timer = &pxa_timer,
.init_machine = stargate2_init,
.atag_offset = 0x100,
+ .restart = pxa_restart,
MACHINE_END
#endif
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index ad47bb9..4fa36a3 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -495,4 +495,5 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = tavorevb_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c
index fd56916..8a22879 100644
--- a/arch/arm/mach-pxa/tavorevb3.c
+++ b/arch/arm/mach-pxa/tavorevb3.c
@@ -132,4 +132,5 @@ MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)")
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = evb3_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index ef64530..dfe40f8 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -905,7 +905,7 @@ static struct platform_device *devices[] __initdata = {
static void tosa_poweroff(void)
{
- arm_machine_restart('g', NULL);
+ pxa_restart('g', NULL);
}
static void tosa_restart(char mode, const char *cmd)
@@ -935,7 +935,6 @@ static void __init tosa_init(void)
init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
pm_power_off = tosa_poweroff;
- arm_pm_restart = tosa_restart;
PCFR |= PCFR_OPDE;
@@ -978,4 +977,5 @@ MACHINE_START(TOSA, "SHARP Tosa")
.handle_irq = pxa25x_handle_irq,
.init_machine = tosa_init,
.timer = &pxa_timer,
+ .restart = tosa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 35bbf13..55ee85a 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -560,6 +560,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
@@ -570,4 +571,5 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 242ddae..afe2b74 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -998,4 +998,5 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
.init_machine = viper_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index a7539a6..d2bd677 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -721,5 +721,6 @@ MACHINE_START(VPAC270, "Voipac PXA270")
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
- .init_machine = vpac270_init
+ .init_machine = vpac270_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 70e1730..4bbe9a3 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -185,5 +185,6 @@ MACHINE_START(XCEP, "Iskratel XCEP")
.init_irq = pxa25x_init_irq,
.handle_irq = pxa25x_handle_irq,
.timer = &pxa_timer,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c
index ead32c9..d75f66a 100644
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -725,4 +725,5 @@ MACHINE_START(ZIPIT2, "Zipit Z2")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = z2_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
index 498b83b..9db35a7 100644
--- a/arch/arm/mach-pxa/zeus.c
+++ b/arch/arm/mach-pxa/zeus.c
@@ -911,5 +911,6 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS")
.handle_irq = pxa27x_handle_irq,
.timer = &pxa_timer,
.init_machine = zeus_init,
+ .restart = pxa_restart,
MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 31d4968..4e53c2d 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -429,4 +429,5 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
.handle_irq = pxa3xx_handle_irq,
.timer = &pxa_timer,
.init_machine = zylonite_init,
+ .restart = pxa_restart,
MACHINE_END
--
1.7.4.4
More information about the linux-arm-kernel
mailing list