[PATCH 31/41] ARM: restart: sa1100: use new restart hook
Russell King - ARM Linux
linux at arm.linux.org.uk
Sun Nov 6 12:50:29 EST 2011
Hook these platforms restart code into the new restart hook rather
than using arch_reset().
Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
---
arch/arm/mach-sa1100/assabet.c | 1 +
arch/arm/mach-sa1100/badge4.c | 1 +
arch/arm/mach-sa1100/cerf.c | 1 +
arch/arm/mach-sa1100/collie.c | 1 +
arch/arm/mach-sa1100/generic.c | 11 +++++++++++
arch/arm/mach-sa1100/generic.h | 1 +
arch/arm/mach-sa1100/h3100.c | 1 +
arch/arm/mach-sa1100/h3600.c | 1 +
arch/arm/mach-sa1100/hackkit.c | 1 +
arch/arm/mach-sa1100/include/mach/system.h | 9 ---------
arch/arm/mach-sa1100/jornada720.c | 1 +
arch/arm/mach-sa1100/lart.c | 1 +
arch/arm/mach-sa1100/nanoengine.c | 1 +
arch/arm/mach-sa1100/pleb.c | 1 +
arch/arm/mach-sa1100/shannon.c | 1 +
arch/arm/mach-sa1100/simpad.c | 1 +
16 files changed, 25 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 3dd133f..6b93e20 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -455,4 +455,5 @@ MACHINE_START(ASSABET, "Intel-Assabet")
#ifdef CONFIG_SA1111
.dma_zone_size = SZ_1M,
#endif
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index bda83e1..b07a2c0 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -309,4 +309,5 @@ MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4")
#ifdef CONFIG_SA1111
.dma_zone_size = SZ_1M,
#endif
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 7f3da4b..11bb6d0 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -139,4 +139,5 @@ MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
.init_irq = cerf_init_irq,
.timer = &sa1100_timer,
.init_machine = cerf_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index bd3e1bf..2428fc9 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -386,4 +386,5 @@ MACHINE_START(COLLIE, "Sharp-Collie")
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = collie_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 5fa5ae1..bb10ee2 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -126,6 +126,17 @@ static void sa1100_power_off(void)
PMCR = PMCR_SF;
}
+void sa11x0_restart(char mode, const char *cmd)
+{
+ if (mode == 's') {
+ /* Jump into ROM at address 0 */
+ soft_restart(0);
+ } else {
+ /* Use on-chip reset capability */
+ RSRR = RSRR_SWR;
+ }
+}
+
static void sa11x0_register_device(struct platform_device *dev, void *data)
{
int err;
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index b7a9a60..33268cf 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -10,6 +10,7 @@ extern struct sys_timer sa1100_timer;
extern void __init sa1100_map_io(void);
extern void __init sa1100_init_irq(void);
extern void __init sa1100_init_gpio(void);
+extern void sa11x0_restart(char, const char *);
#define SET_BANK(__nr,__start,__size) \
mi->bank[__nr].start = (__start), \
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
index b30733a..1e6b3c1 100644
--- a/arch/arm/mach-sa1100/h3100.c
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -89,5 +89,6 @@ MACHINE_START(H3100, "Compaq iPAQ H3100")
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = h3100_mach_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 6fd324d..6b58e74 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -130,5 +130,6 @@ MACHINE_START(H3600, "Compaq iPAQ H3600")
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = h3600_mach_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 30f4a55..c01bb36 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -200,4 +200,5 @@ MACHINE_START(HACKKIT, "HackKit Cpu Board")
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = hackkit_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/include/mach/system.h b/arch/arm/mach-sa1100/include/mach/system.h
index 345d35b..3c3e842 100644
--- a/arch/arm/mach-sa1100/include/mach/system.h
+++ b/arch/arm/mach-sa1100/include/mach/system.h
@@ -3,8 +3,6 @@
*
* Copyright (c) 1999 Nicolas Pitre <nico at fluxnic.net>
*/
-#include <mach/hardware.h>
-
static inline void arch_idle(void)
{
cpu_do_idle();
@@ -12,11 +10,4 @@ static inline void arch_idle(void)
static inline void arch_reset(char mode, const char *cmd)
{
- if (mode == 's') {
- /* Jump into ROM at address 0 */
- soft_restart(0);
- } else {
- /* Use on-chip reset capability */
- RSRR = RSRR_SWR;
- }
}
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 0bb520d..065aada 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -372,4 +372,5 @@ MACHINE_START(JORNADA720, "HP Jornada 720")
#ifdef CONFIG_SA1111
.dma_zone_size = SZ_1M,
#endif
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 5bc59d0..af4e276 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -66,4 +66,5 @@ MACHINE_START(LART, "LART")
.init_irq = sa1100_init_irq,
.init_machine = lart_init,
.timer = &sa1100_timer,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/nanoengine.c b/arch/arm/mach-sa1100/nanoengine.c
index 032f388..ed77f85 100644
--- a/arch/arm/mach-sa1100/nanoengine.c
+++ b/arch/arm/mach-sa1100/nanoengine.c
@@ -116,4 +116,5 @@ MACHINE_START(NANOENGINE, "BSE nanoEngine")
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = nanoengine_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index 65161f2..9307df0 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -150,4 +150,5 @@ MACHINE_START(PLEB, "PLEB")
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = pleb_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 1cccbf5..318b2b7 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -87,4 +87,5 @@ MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = shannon_init,
+ .restart = sa11x0_restart,
MACHINE_END
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 4790f3f..e17c04d 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -396,4 +396,5 @@ MACHINE_START(SIMPAD, "Simpad")
.map_io = simpad_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
+ .restart = sa11x0_restart,
MACHINE_END
--
1.7.4.4
More information about the linux-arm-kernel
mailing list