[PATCH 3/4] mmc: Logging neatening
Joe Perches
joe at perches.com
Tue Nov 15 18:32:07 EST 2011
Coalesce formats.
Align arguments.
Add pr_fmt, remove prefixes from format strings.
Neaten DBG uses, rearrange argument order.
Signed-off-by: Joe Perches <joe at perches.com>
---
drivers/mmc/card/mmc_test.c | 49 +++++-------
drivers/mmc/core/core.c | 52 ++++++------
drivers/mmc/core/host.c | 3 +-
drivers/mmc/core/mmc.c | 22 ++---
drivers/mmc/core/mmc_ops.c | 5 +-
drivers/mmc/core/sd.c | 25 +++---
drivers/mmc/core/sdio_bus.c | 2 +
drivers/mmc/core/sdio_io.c | 14 ++--
drivers/mmc/core/sdio_irq.c | 10 ++-
drivers/mmc/host/at91_mci.c | 3 +-
drivers/mmc/host/au1xmmc.c | 35 ++++----
drivers/mmc/host/bfin_sdh.c | 3 +-
drivers/mmc/host/dw_mmc.c | 16 ++--
drivers/mmc/host/mmc_spi.c | 9 +-
drivers/mmc/host/mmci.c | 3 +-
drivers/mmc/host/mvsdio.c | 33 ++++----
drivers/mmc/host/omap_hsmmc.c | 11 +--
drivers/mmc/host/sdhci-pci.c | 17 ++---
drivers/mmc/host/sdhci-pxav3.c | 7 +-
drivers/mmc/host/sdhci.c | 175 ++++++++++++++++++---------------------
drivers/mmc/host/sdricoh_cs.c | 12 ++--
drivers/mmc/host/tifm_sd.c | 9 +-
drivers/mmc/host/via-sdmmc.c | 22 +++---
drivers/mmc/host/vub300.c | 54 ++++++-------
drivers/mmc/host/wbsd.c | 5 +-
25 files changed, 277 insertions(+), 319 deletions(-)
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
index b038c4a..f079555 100644
--- a/drivers/mmc/card/mmc_test.c
+++ b/drivers/mmc/card/mmc_test.c
@@ -9,6 +9,8 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/mmc/core.h>
#include <linux/mmc/card.h>
#include <linux/mmc/host.h>
@@ -251,8 +253,7 @@ static int mmc_test_wait_busy(struct mmc_test_card *test)
if (!busy && mmc_test_busy(&cmd)) {
busy = 1;
if (test->card->host->caps & MMC_CAP_WAIT_WHILE_BUSY)
- pr_info("%s: Warning: Host did not "
- "wait for busy state to end.\n",
+ pr_info("%s: Warning: Host did not wait for busy state to end\n",
mmc_hostname(test->card->host));
}
} while (mmc_test_busy(&cmd));
@@ -553,12 +554,11 @@ static void mmc_test_print_rate(struct mmc_test_card *test, uint64_t bytes,
rate = mmc_test_rate(bytes, &ts);
iops = mmc_test_rate(100, &ts); /* I/O ops per sec x 100 */
- pr_info("%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu "
- "seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
- mmc_hostname(test->card->host), sectors, sectors >> 1,
- (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
- (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024,
- iops / 100, iops % 100);
+ pr_info("%s: Transfer of %u sectors (%u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS)\n",
+ mmc_hostname(test->card->host), sectors, sectors >> 1,
+ (sectors & 1 ? ".5" : ""), (unsigned long)ts.tv_sec,
+ (unsigned long)ts.tv_nsec, rate / 1000, rate / 1024,
+ iops / 100, iops % 100);
mmc_test_save_transfer_result(test, 1, sectors, ts, rate, iops);
}
@@ -579,14 +579,12 @@ static void mmc_test_print_avg_rate(struct mmc_test_card *test, uint64_t bytes,
rate = mmc_test_rate(tot, &ts);
iops = mmc_test_rate(count * 100, &ts); /* I/O ops per sec x 100 */
- pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took "
- "%lu.%09lu seconds (%u kB/s, %u KiB/s, "
- "%u.%02u IOPS, sg_len %d)\n",
- mmc_hostname(test->card->host), count, sectors, count,
- sectors >> 1, (sectors & 1 ? ".5" : ""),
- (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec,
- rate / 1000, rate / 1024, iops / 100, iops % 100,
- test->area.sg_len);
+ pr_info("%s: Transfer of %u x %u sectors (%u x %u%s KiB) took %lu.%09lu seconds (%u kB/s, %u KiB/s, %u.%02u IOPS, sg_len %d)\n",
+ mmc_hostname(test->card->host), count, sectors, count,
+ sectors >> 1, (sectors & 1 ? ".5" : ""),
+ (unsigned long)ts.tv_sec, (unsigned long)ts.tv_nsec,
+ rate / 1000, rate / 1024, iops / 100, iops % 100,
+ test->area.sg_len);
mmc_test_save_transfer_result(test, count, sectors, ts, rate, iops);
}
@@ -1410,7 +1408,7 @@ static int mmc_test_multi_read_high(struct mmc_test_card *test)
static int mmc_test_no_highmem(struct mmc_test_card *test)
{
pr_info("%s: Highmem not configured - test skipped\n",
- mmc_hostname(test->card->host));
+ mmc_hostname(test->card->host));
return 0;
}
@@ -1437,7 +1435,7 @@ static int mmc_test_area_map(struct mmc_test_card *test, unsigned long sz,
}
if (err)
pr_info("%s: Failed to map sg list\n",
- mmc_hostname(test->card->host));
+ mmc_hostname(test->card->host));
return err;
}
@@ -2709,8 +2707,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
if (mmc_test_cases[i].prepare) {
ret = mmc_test_cases[i].prepare(test);
if (ret) {
- pr_info("%s: Result: Prepare "
- "stage failed! (%d)\n",
+ pr_info("%s: Result: Prepare stage failed! (%d)\n",
mmc_hostname(test->card->host),
ret);
continue;
@@ -2747,13 +2744,11 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
mmc_hostname(test->card->host));
break;
case RESULT_UNSUP_HOST:
- pr_info("%s: Result: UNSUPPORTED "
- "(by host)\n",
+ pr_info("%s: Result: UNSUPPORTED (by host)\n",
mmc_hostname(test->card->host));
break;
case RESULT_UNSUP_CARD:
- pr_info("%s: Result: UNSUPPORTED "
- "(by card)\n",
+ pr_info("%s: Result: UNSUPPORTED (by card)\n",
mmc_hostname(test->card->host));
break;
default:
@@ -2768,8 +2763,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
if (mmc_test_cases[i].cleanup) {
ret = mmc_test_cases[i].cleanup(test);
if (ret) {
- pr_info("%s: Warning: Cleanup "
- "stage failed! (%d)\n",
+ pr_info("%s: Warning: Cleanup stage failed! (%d)\n",
mmc_hostname(test->card->host),
ret);
}
@@ -2778,8 +2772,7 @@ static void mmc_test_run(struct mmc_test_card *test, int testcase)
mmc_release_host(test->card->host);
- pr_info("%s: Tests completed.\n",
- mmc_hostname(test->card->host));
+ pr_info("%s: Tests completed\n", mmc_hostname(test->card->host));
}
static void mmc_test_free_result(struct mmc_card *card)
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 54d6a13..39e1311 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -10,6 +10,9 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/interrupt.h>
@@ -153,22 +156,22 @@ void mmc_request_done(struct mmc_host *host, struct mmc_request *mrq)
led_trigger_event(host->led, LED_OFF);
pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
- mmc_hostname(host), cmd->opcode, err,
- cmd->resp[0], cmd->resp[1],
- cmd->resp[2], cmd->resp[3]);
+ mmc_hostname(host), cmd->opcode, err,
+ cmd->resp[0], cmd->resp[1],
+ cmd->resp[2], cmd->resp[3]);
if (mrq->data) {
pr_debug("%s: %d bytes transferred: %d\n",
- mmc_hostname(host),
- mrq->data->bytes_xfered, mrq->data->error);
+ mmc_hostname(host),
+ mrq->data->bytes_xfered, mrq->data->error);
}
if (mrq->stop) {
pr_debug("%s: (CMD%u): %d: %08x %08x %08x %08x\n",
- mmc_hostname(host), mrq->stop->opcode,
- mrq->stop->error,
- mrq->stop->resp[0], mrq->stop->resp[1],
- mrq->stop->resp[2], mrq->stop->resp[3]);
+ mmc_hostname(host), mrq->stop->opcode,
+ mrq->stop->error,
+ mrq->stop->resp[0], mrq->stop->resp[1],
+ mrq->stop->resp[2], mrq->stop->resp[3]);
}
if (mrq->done)
@@ -193,12 +196,11 @@ mmc_start_request(struct mmc_host *host, struct mmc_request *mrq)
mrq->cmd->arg, mrq->cmd->flags);
if (mrq->data) {
- pr_debug("%s: blksz %d blocks %d flags %08x "
- "tsac %d ms nsac %d\n",
- mmc_hostname(host), mrq->data->blksz,
- mrq->data->blocks, mrq->data->flags,
- mrq->data->timeout_ns / 1000000,
- mrq->data->timeout_clks);
+ pr_debug("%s: blksz %d blocks %d flags %08x tsac %d ms nsac %d\n",
+ mmc_hostname(host), mrq->data->blksz,
+ mrq->data->blocks, mrq->data->flags,
+ mrq->data->timeout_ns / 1000000,
+ mrq->data->timeout_clks);
}
if (mrq->stop) {
@@ -842,8 +844,7 @@ static inline void mmc_set_ios(struct mmc_host *host)
{
struct mmc_ios *ios = &host->ios;
- pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u "
- "width %u timing %u\n",
+ pr_debug("%s: clock %uHz busmode %u powermode %u cs %u Vdd %u width %u timing %u\n",
mmc_hostname(host), ios->clock, ios->bus_mode,
ios->power_mode, ios->chip_select, ios->vdd,
ios->bus_width, ios->timing);
@@ -1310,8 +1311,7 @@ void mmc_power_off(struct mmc_host *host)
notify_type, timeout);
if (err && err != -EBADMSG)
- pr_err("Device failed to respond within %d poweroff "
- "time. Forcefully powering down the device\n",
+ pr_err("Device failed to respond within %d poweroff time. Forcefully powering down the device.\n",
timeout);
/* Set the card state to no notification after the poweroff */
@@ -1642,8 +1642,8 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
- pr_err("mmc_erase: group start error %d, "
- "status %#x\n", err, cmd.resp[0]);
+ pr_err("mmc_erase: group start error %d, status %#x\n",
+ err, cmd.resp[0]);
err = -EIO;
goto out;
}
@@ -1688,7 +1688,7 @@ static int mmc_do_erase(struct mmc_card *card, unsigned int from,
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err || (cmd.resp[0] & 0xFDF92000)) {
pr_err("error %d requesting status %#x\n",
- err, cmd.resp[0]);
+ err, cmd.resp[0]);
err = -EIO;
goto out;
}
@@ -2245,7 +2245,7 @@ int mmc_flush_cache(struct mmc_card *card)
EXT_CSD_FLUSH_CACHE, 1, 0);
if (err)
pr_err("%s: cache flush error %d\n",
- mmc_hostname(card->host), err);
+ mmc_hostname(card->host), err);
}
return err;
@@ -2275,9 +2275,9 @@ int mmc_cache_ctrl(struct mmc_host *host, u8 enable)
EXT_CSD_CACHE_CTRL, enable, 0);
if (err)
pr_err("%s: cache %s error %d\n",
- mmc_hostname(card->host),
- enable ? "on" : "off",
- err);
+ mmc_hostname(card->host),
+ enable ? "on" : "off",
+ err);
else
card->ext_csd.cache_ctrl = enable;
}
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
index 835e86a..7f963c0 100644
--- a/drivers/mmc/core/host.c
+++ b/drivers/mmc/core/host.c
@@ -94,8 +94,7 @@ static void mmc_host_clk_gate_delayed(struct mmc_host *host)
unsigned long flags;
if (!freq) {
- pr_debug("%s: frequency set to 0 in disable function, "
- "this means the clock is already disabled.\n",
+ pr_debug("%s: frequency set to 0 in disable function, this means the clock is already disabled\n",
mmc_hostname(host));
return;
}
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index bbd7adb..f6db788 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -196,8 +196,8 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
*/
ext_csd = kmalloc(512, GFP_KERNEL);
if (!ext_csd) {
- pr_err("%s: could not allocate a buffer to "
- "receive the ext_csd.\n", mmc_hostname(card->host));
+ pr_err("%s: could not allocate a buffer to receive the ext_csd\n",
+ mmc_hostname(card->host));
return -ENOMEM;
}
@@ -218,10 +218,8 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
* stored in their CSD.
*/
if (card->csd.capacity == (4096 * 512)) {
- pr_err("%s: unable to read EXT_CSD "
- "on a possible high capacity card. "
- "Card will be ignored.\n",
- mmc_hostname(card->host));
+ pr_err("%s: unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n",
+ mmc_hostname(card->host));
} else {
pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
mmc_hostname(card->host));
@@ -251,9 +249,9 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
if (card->csd.structure == 3) {
if (card->ext_csd.raw_ext_csd_structure > 2) {
- pr_err("%s: unrecognised EXT_CSD structure "
- "version %d\n", mmc_hostname(card->host),
- card->ext_csd.raw_ext_csd_structure);
+ pr_err("%s: unrecognised EXT_CSD structure version %d\n",
+ mmc_hostname(card->host),
+ card->ext_csd.raw_ext_csd_structure);
err = -EINVAL;
goto out;
}
@@ -984,8 +982,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
err = mmc_select_powerclass(card, ext_csd_bits[idx][0],
ext_csd);
if (err)
- pr_err("%s: power class selection to "
- "bus width %d failed\n",
+ pr_err("%s: power class selection to bus width %d failed\n",
mmc_hostname(card->host),
1 << bus_width);
@@ -1015,8 +1012,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
err = mmc_select_powerclass(card, ext_csd_bits[idx][1],
ext_csd);
if (err)
- pr_err("%s: power class selection to "
- "bus width %d ddr %d failed\n",
+ pr_err("%s: power class selection to bus width %d ddr %d failed\n",
mmc_hostname(card->host),
1 << bus_width, ddr);
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 32deb3e..7c7388c 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -569,9 +569,8 @@ int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
err = mmc_wait_for_cmd(card->host, &cmd, 0);
if (err) {
- pr_warn("%s: error %d interrupting operation. "
- "HPI command response %#x\n", mmc_hostname(card->host),
- err, cmd.resp[0]);
+ pr_warn("%s: error %d interrupting operation. HPI command response %#x\n",
+ mmc_hostname(card->host), err, cmd.resp[0]);
return err;
}
if (status)
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 52a1563..1492b7b 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -10,6 +10,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/stat.h>
@@ -283,9 +285,8 @@ static int mmc_read_switch(struct mmc_card *card)
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- pr_err("%s: could not allocate a buffer for "
- "switch capabilities.\n",
- mmc_hostname(card->host));
+ pr_err("%s: could not allocate a buffer for switch capabilities\n",
+ mmc_hostname(card->host));
return -ENOMEM;
}
@@ -299,7 +300,7 @@ static int mmc_read_switch(struct mmc_card *card)
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- pr_warn("%s: problem reading Bus Speed modes.\n",
+ pr_warn("%s: problem reading Bus Speed modes\n",
mmc_hostname(card->host));
err = 0;
@@ -381,8 +382,8 @@ int mmc_sd_switch_hs(struct mmc_card *card)
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- pr_err("%s: could not allocate a buffer for "
- "switch capabilities.\n", mmc_hostname(card->host));
+ pr_err("%s: could not allocate a buffer for switch capabilities\n",
+ mmc_hostname(card->host));
return -ENOMEM;
}
@@ -391,7 +392,7 @@ int mmc_sd_switch_hs(struct mmc_card *card)
goto out;
if ((status[16] & 0xF) != 1) {
- pr_warn("%s: Problem switching card into high-speed mode!\n",
+ pr_warn("%s: problem switching card into high-speed mode!\n",
mmc_hostname(card->host));
err = 0;
} else {
@@ -456,7 +457,7 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
return err;
if ((status[15] & 0xF) != drive_strength) {
- pr_warn("%s: Problem setting drive strength!\n",
+ pr_warn("%s: problem setting drive strength!\n",
mmc_hostname(card->host));
return 0;
}
@@ -535,7 +536,7 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
return err;
if ((status[16] & 0xF) != card->sd_bus_speed)
- pr_warn("%s: Problem setting bus speed mode!\n",
+ pr_warn("%s: problem setting bus speed mode!\n",
mmc_hostname(card->host));
else {
mmc_set_timing(card->host, timing);
@@ -597,7 +598,7 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status)
return err;
if (((status[15] >> 4) & 0x0F) != current_limit)
- pr_warn("%s: Problem setting current limit!\n",
+ pr_warn("%s: problem setting current limit!\n",
mmc_hostname(card->host));
return 0;
@@ -619,8 +620,8 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
status = kmalloc(64, GFP_KERNEL);
if (!status) {
- pr_err("%s: could not allocate a buffer for "
- "switch capabilities.\n", mmc_hostname(card->host));
+ pr_err("%s: could not allocate a buffer for switch capabilities\n",
+ mmc_hostname(card->host));
return -ENOMEM;
}
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 3d82f12..57ce052 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -11,6 +11,8 @@
* SDIO function driver model
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/device.h>
#include <linux/err.h>
#include <linux/export.h>
diff --git a/drivers/mmc/core/sdio_io.c b/drivers/mmc/core/sdio_io.c
index 8f6f5ac..7c87732 100644
--- a/drivers/mmc/core/sdio_io.c
+++ b/drivers/mmc/core/sdio_io.c
@@ -9,6 +9,8 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/export.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
@@ -65,7 +67,7 @@ int sdio_enable_func(struct sdio_func *func)
BUG_ON(!func);
BUG_ON(!func->card);
- pr_debug("SDIO: Enabling device %s...\n", sdio_func_id(func));
+ pr_debug("Enabling device %s...\n", sdio_func_id(func));
ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, ®);
if (ret)
@@ -90,12 +92,12 @@ int sdio_enable_func(struct sdio_func *func)
goto err;
}
- pr_debug("SDIO: Enabled device %s\n", sdio_func_id(func));
+ pr_debug("Enabled device %s\n", sdio_func_id(func));
return 0;
err:
- pr_debug("SDIO: Failed to enable device %s\n", sdio_func_id(func));
+ pr_debug("Failed to enable device %s\n", sdio_func_id(func));
return ret;
}
EXPORT_SYMBOL_GPL(sdio_enable_func);
@@ -115,7 +117,7 @@ int sdio_disable_func(struct sdio_func *func)
BUG_ON(!func);
BUG_ON(!func->card);
- pr_debug("SDIO: Disabling device %s...\n", sdio_func_id(func));
+ pr_debug("Disabling device %s...\n", sdio_func_id(func));
ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IOEx, 0, ®);
if (ret)
@@ -127,12 +129,12 @@ int sdio_disable_func(struct sdio_func *func)
if (ret)
goto err;
- pr_debug("SDIO: Disabled device %s\n", sdio_func_id(func));
+ pr_debug("Disabled device %s\n", sdio_func_id(func));
return 0;
err:
- pr_debug("SDIO: Failed to disable device %s\n", sdio_func_id(func));
+ pr_debug("Failed to disable device %s\n", sdio_func_id(func));
return -EIO;
}
EXPORT_SYMBOL_GPL(sdio_disable_func);
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index bc9e67a..533d0e5 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -13,6 +13,8 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/kthread.h>
@@ -47,7 +49,7 @@ static int process_sdio_pending_irqs(struct mmc_card *card)
ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending);
if (ret) {
pr_debug("%s: error %d reading SDIO_CCCR_INTx\n",
- mmc_card_id(card), ret);
+ mmc_card_id(card), ret);
return ret;
}
@@ -233,10 +235,10 @@ int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler)
BUG_ON(!func);
BUG_ON(!func->card);
- pr_debug("SDIO: Enabling IRQ for %s...\n", sdio_func_id(func));
+ pr_debug("Enabling IRQ for %s...\n", sdio_func_id(func));
if (func->irq_handler) {
- pr_debug("SDIO: IRQ for %s already in use.\n", sdio_func_id(func));
+ pr_debug("IRQ for %s already in use\n", sdio_func_id(func));
return -EBUSY;
}
@@ -276,7 +278,7 @@ int sdio_release_irq(struct sdio_func *func)
BUG_ON(!func);
BUG_ON(!func->card);
- pr_debug("SDIO: Disabling IRQ for %s...\n", sdio_func_id(func));
+ pr_debug("Disabling IRQ for %s...\n", sdio_func_id(func));
if (func->irq_handler) {
func->irq_handler = NULL;
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index f437c3e..d63f453 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -968,8 +968,7 @@ static int __init at91_mci_probe(struct platform_device *pdev)
if (at91mci_is_mci1rev2xx())
mmc->caps |= MMC_CAP_4_BIT_DATA;
else
- dev_warn(&pdev->dev, "4 wire bus mode not supported"
- " - using 1 wire\n");
+ dev_warn(&pdev->dev, "4 wire bus mode not supported - using 1 wire\n");
}
host->buffer = dma_alloc_coherent(&pdev->dev, MCI_BUFSIZE,
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index dbd0c8a..cfd325d 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -32,6 +32,8 @@
* (the low to high transition will not occur).
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
@@ -54,10 +56,11 @@
/* #define DEBUG */
#ifdef DEBUG
-#define DBG(fmt, idx, args...) \
- pr_debug("au1xmmc(%d): DEBUG: " fmt, idx, ##args)
+#define DBG(idx, fmt, ...) \
+ pr_debug("(%d): DEBUG: " fmt, idx, ##__VA_ARGS__)
#else
-#define DBG(fmt, idx, args...) do {} while (0)
+#define DBG(idx, fmt, ...) \
+ no_printk(fmt, ##__VA_ARGS__)
#endif
/* Hardware definitions */
@@ -277,8 +280,7 @@ static int au1xmmc_send_command(struct au1xmmc_host *host, int wait,
mmccmd |= SD_CMD_RT_3;
break;
default:
- pr_info("au1xmmc: unhandled response type %02x\n",
- mmc_resp_type(cmd));
+ pr_info("unhandled response type %02x\n", mmc_resp_type(cmd));
return -EINVAL;
}
@@ -478,19 +480,19 @@ static void au1xmmc_receive_pio(struct au1xmmc_host *host)
break;
if (status & SD_STATUS_RC) {
- DBG("RX CRC Error [%d + %d].\n", host->pdev->id,
- host->pio.len, count);
+ DBG(host->pdev->id, "RX CRC Error [%d + %d]\n",
+ host->pio.len, count);
break;
}
if (status & SD_STATUS_RO) {
- DBG("RX Overrun [%d + %d]\n", host->pdev->id,
- host->pio.len, count);
+ DBG(host->pdev->id, "RX Overrun [%d + %d]\n",
+ host->pio.len, count);
break;
}
else if (status & SD_STATUS_RU) {
- DBG("RX Underrun [%d + %d]\n", host->pdev->id,
- host->pio.len, count);
+ DBG(host->pdev->id, "RX Underrun [%d + %d]\n",
+ host->pio.len, count);
break;
}
@@ -835,8 +837,7 @@ static irqreturn_t au1xmmc_irq(int irq, void *dev_id)
au1xmmc_receive_pio(host);
} else if (status & 0x203F3C70) {
- DBG("Unhandled status %8.8x\n", host->pdev->id,
- status);
+ DBG(host->pdev->id, "Unhandled status %8.8x\n", status);
}
au_writel(status, HOST_STATUS(host));
@@ -1050,7 +1051,7 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
if (has_dbdma()) {
ret = au1xmmc_dbdma_init(host);
if (ret)
- pr_info(DRIVER_NAME ": DBDMA init failed; using PIO\n");
+ pr_info("DBDMA init failed; using PIO\n");
}
#ifdef CONFIG_LEDS_CLASS
@@ -1075,8 +1076,8 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, host);
- pr_info(DRIVER_NAME ": MMC Controller %d set up at %8.8X"
- " (mode=%s)\n", pdev->id, host->iobase,
+ pr_info("MMC Controller %d set up at %8.8X (mode=%s)\n",
+ pdev->id, host->iobase,
host->flags & HOST_F_DMA ? "dma" : "pio");
return 0; /* all ok */
@@ -1206,7 +1207,7 @@ static int __init au1xmmc_init(void)
*/
memid = au1xxx_ddma_add_device(&au1xmmc_mem_dbdev);
if (!memid)
- pr_err("au1xmmc: cannot add memory dbdma\n");
+ pr_err("cannot add memory dbdma\n");
}
return platform_driver_register(&au1xmmc_driver);
}
diff --git a/drivers/mmc/host/bfin_sdh.c b/drivers/mmc/host/bfin_sdh.c
index 0371bf5..780a1eb 100644
--- a/drivers/mmc/host/bfin_sdh.c
+++ b/drivers/mmc/host/bfin_sdh.c
@@ -162,8 +162,7 @@ static int sdh_setup_data(struct sdh_host *host, struct mmc_data *data)
host->sg_cpu[i].cfg = dma_cfg;
host->sg_cpu[i].x_count = sg_dma_len(sg) / 4;
host->sg_cpu[i].x_modify = 4;
- dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, "
- "cfg:0x%x, x_count:0x%x, x_modify:0x%x\n",
+ dev_dbg(mmc_dev(host->mmc), "%d: start_addr:0x%lx, cfg:0x%x, x_count:0x%x, x_modify:0x%x\n",
i, host->sg_cpu[i].start_addr,
host->sg_cpu[i].cfg, host->sg_cpu[i].x_count,
host->sg_cpu[i].x_modify);
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 3aaeb08..5d34c01 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -554,8 +554,8 @@ static void dw_mci_setup_bus(struct dw_mci_slot *slot)
div = (host->bus_hz / slot->clock) >> 1;
dev_info(&slot->mmc->class_dev,
- "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ"
- " div = %d)\n", slot->id, host->bus_hz, slot->clock,
+ "Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ div = %d)\n",
+ slot->id, host->bus_hz, slot->clock,
div ? ((host->bus_hz / div) >> 1) : host->bus_hz, div);
/* disable clock */
@@ -942,8 +942,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
data->error = -ETIMEDOUT;
} else {
dev_err(&host->pdev->dev,
- "data FIFO error "
- "(status=%08x)\n",
+ "data FIFO error (status=%08x)\n",
status);
data->error = -EIO;
}
@@ -1776,8 +1775,8 @@ static void dw_mci_init_dma(struct dw_mci *host)
if (host->dma_ops->init) {
if (host->dma_ops->init(host)) {
- dev_err(&host->pdev->dev, "%s: Unable to initialize "
- "DMA Controller.\n", __func__);
+ dev_err(&host->pdev->dev, "%s: Unable to initialize DMA Controller\n",
+ __func__);
goto no_dma;
}
} else {
@@ -1985,9 +1984,8 @@ static int dw_mci_probe(struct platform_device *pdev)
DW_MCI_ERROR_FLAGS | SDMMC_INT_CD);
mci_writel(host, CTRL, SDMMC_CTRL_INT_ENABLE); /* Enable mci interrupt */
- dev_info(&pdev->dev, "DW MMC controller at irq %d, "
- "%d bit host data width, "
- "%u deep fifo\n",
+ dev_info(&pdev->dev,
+ "DW MMC controller at irq %d, %d bit host data width, %u deep fifo\n",
irq, width, fifo_size);
if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
dev_info(&pdev->dev, "Internal DMAC interrupt fix enabled.\n");
diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c
index 92946b8..f77899f 100644
--- a/drivers/mmc/host/mmc_spi.c
+++ b/drivers/mmc/host/mmc_spi.c
@@ -860,9 +860,9 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t,
be16_to_cpus(&scratch->crc_val);
if (scratch->crc_val != crc) {
- dev_dbg(&spi->dev, "read - crc error: crc_val=0x%04x, "
- "computed=0x%04x len=%d\n",
- scratch->crc_val, crc, t->len);
+ dev_dbg(&spi->dev,
+ "read - crc error: crc_val=0x%04x, computed=0x%04x len=%d\n",
+ scratch->crc_val, crc, t->len);
return -EILSEQ;
}
}
@@ -1253,8 +1253,7 @@ static void mmc_spi_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
mres = spi_setup(host->spi);
if (mres < 0)
dev_dbg(&host->spi->dev,
- "switch back to SPI mode 3"
- " failed\n");
+ "switch back to SPI mode 3 failed\n");
}
}
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 0ea9935..33b3cd1 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1229,8 +1229,7 @@ static int __devinit mmci_probe(struct amba_device *dev,
host->mmc->ocr_avail = (u32) mask;
if (plat->ocr_mask)
dev_warn(&dev->dev,
- "Provided ocr_mask/setpower will not be used "
- "(using regulator instead)\n");
+"Provided ocr_mask/setpower will not be used (using regulator instead)\n");
}
}
#endif
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 211a495..93012a0 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -84,9 +84,9 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data)
hw_state = mvsd_read(MVSD_HW_STATE);
count++;
} while (!(hw_state & (1 << 13)));
- dev_dbg(host->dev, "*** wait for FIFO_EMPTY bit "
- "(hw=0x%04x, count=%d, jiffies=%ld)\n",
- hw_state, count, jiffies - (t - HZ));
+ dev_dbg(host->dev,
+"*** wait for FIFO_EMPTY bit (hw=0x%04x, count=%d, jiffies=%ld)\n",
+ hw_state, count, jiffies - (t - HZ));
}
/* If timeout=0 then maximum timeout index is used. */
@@ -117,10 +117,9 @@ static int mvsd_setup_data(struct mvsd_host *host, struct mmc_data *data)
host->pio_size = data->blocks * data->blksz;
host->pio_ptr = sg_virt(data->sg);
if (!nodma)
- pr_debug("%s: fallback to PIO for data "
- "at 0x%p size %d\n",
- mmc_hostname(host->mmc),
- host->pio_ptr, host->pio_size);
+ pr_debug("%s: fallback to PIO for data at 0x%p size %d\n",
+ mmc_hostname(host->mmc),
+ host->pio_ptr, host->pio_size);
return 1;
} else {
dma_addr_t phys_addr;
@@ -489,9 +488,9 @@ static irqreturn_t mvsd_irq(int irq, void *dev)
if (irq_handled)
return IRQ_HANDLED;
- pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x "
- "pio=%d\n", mmc_hostname(host->mmc), intr_status,
- host->intr_en, host->pio_size);
+ pr_err("%s: unhandled interrupt status=0x%04x en=0x%04x pio=%d\n",
+ mmc_hostname(host->mmc), intr_status,
+ host->intr_en, host->pio_size);
return IRQ_NONE;
}
@@ -505,13 +504,13 @@ static void mvsd_timeout_timer(unsigned long data)
spin_lock_irqsave(&host->lock, flags);
mrq = host->mrq;
if (mrq) {
- pr_err("%s: Timeout waiting for hardware interrupt.\n",
- mmc_hostname(host->mmc));
- pr_err("%s: hw_state=0x%04x, intr_status=0x%04x "
- "intr_en=0x%04x\n", mmc_hostname(host->mmc),
- mvsd_read(MVSD_HW_STATE),
- mvsd_read(MVSD_NOR_INTR_STATUS),
- mvsd_read(MVSD_NOR_INTR_EN));
+ pr_err("%s: Timeout waiting for hardware interrupt\n",
+ mmc_hostname(host->mmc));
+ pr_err("%s: hw_state=0x%04x, intr_status=0x%04x intr_en=0x%04x\n",
+ mmc_hostname(host->mmc),
+ mvsd_read(MVSD_HW_STATE),
+ mvsd_read(MVSD_NOR_INTR_STATUS),
+ mvsd_read(MVSD_NOR_INTR_EN));
host->mrq = NULL;
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 1455bd6..dd5159b 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1264,9 +1264,8 @@ static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host)
host->reqs_blocked = 0;
if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) {
if (host->protect_card) {
- pr_info("%s: cover is closed, "
- "card is now accessible\n",
- mmc_hostname(host->mmc));
+ pr_info("%s: cover is closed, card is now accessible\n",
+ mmc_hostname(host->mmc));
host->protect_card = 0;
}
} else {
@@ -1967,8 +1966,7 @@ static int __init omap_hsmmc_probe(struct platform_device *pdev)
if (host->got_dbclk)
if (clk_enable(host->dbclk) != 0)
- dev_dbg(mmc_dev(host->mmc), "Enabling debounce"
- " clk failed\n");
+ dev_dbg(mmc_dev(host->mmc), "Enabling debounce clk failed\n");
}
/* Since we do only SG emulation, we can have as many segs
@@ -2169,8 +2167,7 @@ static int omap_hsmmc_suspend(struct device *dev)
host->slot_id);
if (ret) {
dev_dbg(mmc_dev(host->mmc),
- "Unable to handle MMC board"
- " level suspend\n");
+ "Unable to handle MMC board level suspend\n");
host->suspended = 0;
return ret;
}
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index 6878a94..67c5751 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -460,8 +460,7 @@ static int jmicron_probe(struct sdhci_pci_chip *chip)
if (sd_dev) {
pci_dev_put(sd_dev);
- dev_info(&chip->pdev->dev, "Refusing to bind to "
- "secondary interface.\n");
+ dev_info(&chip->pdev->dev, "Refusing to bind to secondary interface\n");
return -ENODEV;
}
}
@@ -628,10 +627,10 @@ static int syskt_probe_slot(struct sdhci_pci_slot *slot)
u8 board_rev = readb(slot->host->ioaddr + SYSKT_BOARD_REV);
u8 chip_rev = readb(slot->host->ioaddr + SYSKT_CHIP_REV);
- dev_info(&slot->chip->pdev->dev, "SysKonnect CardBus2SDIO, "
- "board rev %d.%d, chip rev %d.%d\n",
- board_rev >> 4, board_rev & 0xf,
- chip_rev >> 4, chip_rev & 0xf);
+ dev_info(&slot->chip->pdev->dev,
+ "SysKonnect CardBus2SDIO, board rev %d.%d, chip rev %d.%d\n",
+ board_rev >> 4, board_rev & 0xf,
+ chip_rev >> 4, chip_rev & 0xf);
if (chip_rev >= 0x20)
slot->host->quirks |= SDHCI_QUIRK_FORCE_DMA;
@@ -925,8 +924,7 @@ static int sdhci_pci_enable_dma(struct sdhci_host *host)
if (((pdev->class & 0xFFFF00) == (PCI_CLASS_SYSTEM_SDHCI << 8)) &&
((pdev->class & 0x0000FF) != PCI_SDHCI_IFDMA) &&
(host->flags & SDHCI_USE_SDMA)) {
- dev_warn(&pdev->dev, "Will use DMA mode even though HW "
- "doesn't fully claim to support it.\n");
+ dev_warn(&pdev->dev, "Will use DMA mode even though HW doesn't fully claim to support it\n");
}
ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
@@ -1202,8 +1200,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
}
if (pci_resource_len(pdev, bar) != 0x100) {
- dev_err(&pdev->dev, "Invalid iomem size. You may "
- "experience problems.\n");
+ dev_err(&pdev->dev, "Invalid iomem size. You may experience problems.\n");
}
if ((pdev->class & 0x0000FF) == PCI_SDHCI_IFVENDOR) {
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index 15673a7..0d8f061 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -82,11 +82,8 @@ static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode)
&& power_mode == MMC_POWER_ON) {
dev_dbg(mmc_dev(host->mmc),
- "%s: slot->power_mode = %d,"
- "ios->power_mode = %d\n",
- __func__,
- pxa->power_mode,
- power_mode);
+ "%s: slot->power_mode = %d, ios->power_mode = %d\n",
+ __func__, pxa->power_mode, power_mode);
/* set we want notice of when 74 clocks are sent */
tmp = readw(host->ioaddr + SD_CE_ATA_2);
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index d146bff..d31c31d 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -13,6 +13,8 @@
* - JMicron (hardware and technical support)
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/delay.h>
#include <linux/highmem.h>
#include <linux/io.h>
@@ -32,8 +34,8 @@
#define DRIVER_NAME "sdhci"
-#define DBG(f, x...) \
- pr_debug(DRIVER_NAME " [%s()]: " f, __func__,## x)
+#define DBG(fmt, ...) \
+ pr_debug("[%s()]: " fmt, __func__, ##__VA_ARGS__)
#if defined(CONFIG_LEDS_CLASS) || (defined(CONFIG_LEDS_CLASS_MODULE) && \
defined(CONFIG_MMC_SDHCI_MODULE))
@@ -68,51 +70,51 @@ static inline int sdhci_runtime_pm_put(struct sdhci_host *host)
static void sdhci_dumpregs(struct sdhci_host *host)
{
- pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
- mmc_hostname(host->mmc));
-
- pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
- sdhci_readl(host, SDHCI_DMA_ADDRESS),
- sdhci_readw(host, SDHCI_HOST_VERSION));
- pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
- sdhci_readw(host, SDHCI_BLOCK_SIZE),
- sdhci_readw(host, SDHCI_BLOCK_COUNT));
- pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
- sdhci_readl(host, SDHCI_ARGUMENT),
- sdhci_readw(host, SDHCI_TRANSFER_MODE));
- pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
- sdhci_readl(host, SDHCI_PRESENT_STATE),
- sdhci_readb(host, SDHCI_HOST_CONTROL));
- pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
- sdhci_readb(host, SDHCI_POWER_CONTROL),
- sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
- pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
- sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
- sdhci_readw(host, SDHCI_CLOCK_CONTROL));
- pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
- sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
- sdhci_readl(host, SDHCI_INT_STATUS));
- pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
- sdhci_readl(host, SDHCI_INT_ENABLE),
- sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
- pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
- sdhci_readw(host, SDHCI_ACMD12_ERR),
- sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
- pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
- sdhci_readl(host, SDHCI_CAPABILITIES),
- sdhci_readl(host, SDHCI_CAPABILITIES_1));
- pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
- sdhci_readw(host, SDHCI_COMMAND),
- sdhci_readl(host, SDHCI_MAX_CURRENT));
- pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
- sdhci_readw(host, SDHCI_HOST_CONTROL2));
+ pr_debug("=========== REGISTER DUMP (%s)===========\n",
+ mmc_hostname(host->mmc));
+
+ pr_debug("Sys addr: 0x%08x | Version: 0x%08x\n",
+ sdhci_readl(host, SDHCI_DMA_ADDRESS),
+ sdhci_readw(host, SDHCI_HOST_VERSION));
+ pr_debug("Blk size: 0x%08x | Blk cnt: 0x%08x\n",
+ sdhci_readw(host, SDHCI_BLOCK_SIZE),
+ sdhci_readw(host, SDHCI_BLOCK_COUNT));
+ pr_debug("Argument: 0x%08x | Trn mode: 0x%08x\n",
+ sdhci_readl(host, SDHCI_ARGUMENT),
+ sdhci_readw(host, SDHCI_TRANSFER_MODE));
+ pr_debug("Present: 0x%08x | Host ctl: 0x%08x\n",
+ sdhci_readl(host, SDHCI_PRESENT_STATE),
+ sdhci_readb(host, SDHCI_HOST_CONTROL));
+ pr_debug("Power: 0x%08x | Blk gap: 0x%08x\n",
+ sdhci_readb(host, SDHCI_POWER_CONTROL),
+ sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
+ pr_debug("Wake-up: 0x%08x | Clock: 0x%08x\n",
+ sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
+ sdhci_readw(host, SDHCI_CLOCK_CONTROL));
+ pr_debug("Timeout: 0x%08x | Int stat: 0x%08x\n",
+ sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
+ sdhci_readl(host, SDHCI_INT_STATUS));
+ pr_debug("Int enab: 0x%08x | Sig enab: 0x%08x\n",
+ sdhci_readl(host, SDHCI_INT_ENABLE),
+ sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
+ pr_debug("AC12 err: 0x%08x | Slot int: 0x%08x\n",
+ sdhci_readw(host, SDHCI_ACMD12_ERR),
+ sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
+ pr_debug("Caps: 0x%08x | Caps_1: 0x%08x\n",
+ sdhci_readl(host, SDHCI_CAPABILITIES),
+ sdhci_readl(host, SDHCI_CAPABILITIES_1));
+ pr_debug("Cmd: 0x%08x | Max curr: 0x%08x\n",
+ sdhci_readw(host, SDHCI_COMMAND),
+ sdhci_readl(host, SDHCI_MAX_CURRENT));
+ pr_debug("Host ctl2: 0x%08x\n",
+ sdhci_readw(host, SDHCI_HOST_CONTROL2));
if (host->flags & SDHCI_USE_ADMA)
- pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
- readl(host->ioaddr + SDHCI_ADMA_ERROR),
- readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ pr_debug("ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
- pr_debug(DRIVER_NAME ": ===========================================\n");
+ pr_debug("===========================================\n");
}
/*****************************************************************************\
@@ -417,7 +419,7 @@ static void sdhci_transfer_pio(struct sdhci_host *host)
break;
}
- DBG("PIO transfer complete.\n");
+ DBG("PIO transfer complete\n");
}
static char *sdhci_kmap_atomic(struct scatterlist *sg, unsigned long *flags)
@@ -745,9 +747,8 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
if (unlikely(broken)) {
for_each_sg(data->sg, sg, data->sg_len, i) {
if (sg->length & 0x3) {
- DBG("Reverting to PIO because of "
- "transfer size (%d)\n",
- sg->length);
+ DBG("Reverting to PIO because of transfer size (%d)\n",
+ sg->length);
host->flags &= ~SDHCI_REQ_USE_DMA;
break;
}
@@ -780,8 +781,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
if (unlikely(broken)) {
for_each_sg(data->sg, sg, data->sg_len, i) {
if (sg->offset & 0x3) {
- DBG("Reverting to PIO because of "
- "bad alignment\n");
+ DBG("Reverting to PIO because of bad alignment\n");
host->flags &= ~SDHCI_REQ_USE_DMA;
break;
}
@@ -972,8 +972,8 @@ static void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
if (timeout == 0) {
- pr_err("%s: Controller never released "
- "inhibit bit(s).\n", mmc_hostname(host->mmc));
+ pr_err("%s: Controller never released inhibit bit(s)\n",
+ mmc_hostname(host->mmc));
sdhci_dumpregs(host);
cmd->error = -EIO;
tasklet_schedule(&host->finish_tasklet);
@@ -1154,8 +1154,8 @@ static void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
& SDHCI_CLOCK_INT_STABLE)) {
if (timeout == 0) {
- pr_err("%s: Internal clock never "
- "stabilised.\n", mmc_hostname(host->mmc));
+ pr_err("%s: Internal clock never stabilised\n",
+ mmc_hostname(host->mmc));
sdhci_dumpregs(host);
return;
}
@@ -1592,8 +1592,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
if (!(ctrl & SDHCI_CTRL_VDD_180))
return 0;
else {
- pr_info(DRIVER_NAME ": Switching to 3.3V "
- "signalling voltage failed\n");
+ pr_info("Switching to 3.3V signalling voltage failed\n");
return -EIO;
}
} else if (!(ctrl & SDHCI_CTRL_VDD_180) &&
@@ -1651,8 +1650,7 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
pwr |= SDHCI_POWER_ON;
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
- pr_info(DRIVER_NAME ": Switching to 1.8V signalling "
- "voltage failed, retrying with S18R set to 0\n");
+ pr_info("Switching to 1.8V signalling voltage failed, retrying with S18R set to 0\n");
return -EAGAIN;
} else
/* No signal voltage switch required */
@@ -1774,10 +1772,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc)
spin_lock(&host->lock);
if (!host->tuning_done) {
- pr_info(DRIVER_NAME ": Timeout waiting for "
- "Buffer Read Ready interrupt during tuning "
- "procedure, falling back to fixed sampling "
- "clock\n");
+ pr_info("Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock\n");
ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2);
ctrl &= ~SDHCI_CTRL_TUNED_CLK;
ctrl &= ~SDHCI_CTRL_EXEC_TUNING;
@@ -1804,9 +1799,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc)
sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
} else {
if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) {
- pr_info(DRIVER_NAME ": Tuning procedure"
- " failed, falling back to fixed sampling"
- " clock\n");
+ pr_info("Tuning procedure failed, falling back to fixed sampling clock\n");
err = -EIO;
}
}
@@ -2010,8 +2003,8 @@ static void sdhci_timeout_timer(unsigned long data)
spin_lock_irqsave(&host->lock, flags);
if (host->mrq) {
- pr_err("%s: Timeout waiting for hardware "
- "interrupt.\n", mmc_hostname(host->mmc));
+ pr_err("%s: Timeout waiting for hardware interrupt\n",
+ mmc_hostname(host->mmc));
sdhci_dumpregs(host);
if (host->data) {
@@ -2056,9 +2049,8 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
BUG_ON(intmask == 0);
if (!host->cmd) {
- pr_err("%s: Got command interrupt 0x%08x even "
- "though no command operation was in progress.\n",
- mmc_hostname(host->mmc), (unsigned)intmask);
+ pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress\n",
+ mmc_hostname(host->mmc), (unsigned)intmask);
sdhci_dumpregs(host);
return;
}
@@ -2087,8 +2079,7 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask)
*/
if (host->cmd->flags & MMC_RSP_BUSY) {
if (host->cmd->data)
- DBG("Cannot wait for busy signal when also "
- "doing a data transfer");
+ DBG("Cannot wait for busy signal when also doing a data transfer\n");
else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ))
return;
@@ -2156,9 +2147,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
}
}
- pr_err("%s: Got data interrupt 0x%08x even "
- "though no data operation was in progress.\n",
- mmc_hostname(host->mmc), (unsigned)intmask);
+ pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress\n",
+ mmc_hostname(host->mmc), (unsigned)intmask);
sdhci_dumpregs(host);
return;
@@ -2204,10 +2194,9 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
SDHCI_DEFAULT_BOUNDARY_SIZE;
host->data->bytes_xfered = dmanow - dmastart;
- DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes,"
- " next 0x%08x\n",
- mmc_hostname(host->mmc), dmastart,
- host->data->bytes_xfered, dmanow);
+ DBG("%s: DMA base 0x%08x, transferred 0x%06x bytes, next 0x%08x\n",
+ mmc_hostname(host->mmc), dmastart,
+ host->data->bytes_xfered, dmanow);
sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
}
@@ -2250,7 +2239,7 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
}
DBG("*** %s got interrupt: 0x%08x\n",
- mmc_hostname(host->mmc), intmask);
+ mmc_hostname(host->mmc), intmask);
if (intmask & (SDHCI_INT_CARD_INSERT | SDHCI_INT_CARD_REMOVE)) {
u32 present = sdhci_readl(host, SDHCI_PRESENT_STATE) &
@@ -2548,9 +2537,8 @@ int sdhci_add_host(struct sdhci_host *host)
host->version = (host->version & SDHCI_SPEC_VER_MASK)
>> SDHCI_SPEC_VER_SHIFT;
if (host->version > SDHCI_SPEC_300) {
- pr_err("%s: Unknown controller version (%d). "
- "You may experience problems.\n", mmc_hostname(mmc),
- host->version);
+ pr_err("%s: Unknown controller version (%d). You may experience problems.\n",
+ mmc_hostname(mmc), host->version);
}
caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps :
@@ -2631,8 +2619,8 @@ int sdhci_add_host(struct sdhci_host *host)
if (host->max_clk == 0 || host->quirks &
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) {
if (!host->ops->get_max_clock) {
- pr_err("%s: Hardware doesn't specify base clock "
- "frequency.\n", mmc_hostname(mmc));
+ pr_err("%s: Hardware doesn't specify base clock frequency\n",
+ mmc_hostname(mmc));
return -ENODEV;
}
host->max_clk = host->ops->get_max_clock(host);
@@ -2677,8 +2665,8 @@ int sdhci_add_host(struct sdhci_host *host)
host->timeout_clk = host->ops->get_timeout_clock(host);
} else if (!(host->quirks &
SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK)) {
- pr_err("%s: Hardware doesn't specify timeout clock "
- "frequency.\n", mmc_hostname(mmc));
+ pr_err("%s: Hardware doesn't specify timeout clock frequency\n",
+ mmc_hostname(mmc));
return -ENODEV;
}
}
@@ -2845,8 +2833,8 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->ocr_avail_mmc &= host->ocr_avail_mmc;
if (mmc->ocr_avail == 0) {
- pr_err("%s: Hardware doesn't report any "
- "support voltages.\n", mmc_hostname(mmc));
+ pr_err("%s: Hardware doesn't report any support voltages\n",
+ mmc_hostname(mmc));
return -ENODEV;
}
@@ -2994,8 +2982,8 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
host->flags |= SDHCI_DEVICE_DEAD;
if (host->mrq) {
- pr_err("%s: Controller removed during "
- " transfer!\n", mmc_hostname(host->mmc));
+ pr_err("%s: Controller removed during transfer!\n",
+ mmc_hostname(host->mmc));
host->mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
@@ -3053,9 +3041,8 @@ EXPORT_SYMBOL_GPL(sdhci_free_host);
static int __init sdhci_drv_init(void)
{
- pr_info(DRIVER_NAME
- ": Secure Digital Host Controller Interface driver\n");
- pr_info(DRIVER_NAME ": Copyright(c) Pierre Ossman\n");
+ pr_info("Secure Digital Host Controller Interface driver\n");
+ pr_info("Copyright(c) Pierre Ossman\n");
return 0;
}
diff --git a/drivers/mmc/host/sdricoh_cs.c b/drivers/mmc/host/sdricoh_cs.c
index 7009f17..1e30245 100644
--- a/drivers/mmc/host/sdricoh_cs.c
+++ b/drivers/mmc/host/sdricoh_cs.c
@@ -310,8 +310,8 @@ static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq)
/* transfer data */
if (data && cmd->error == 0) {
- dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i "
- "sg length %i\n", data->blksz, data->blocks,
+ dev_dbg(dev, "transfer: blksz %i blocks %i sg_len %i sg length %i\n",
+ data->blksz, data->blocks,
data->sg_len, data->sg->length);
/* enter data reading mode */
@@ -330,8 +330,8 @@ static void sdricoh_request(struct mmc_host *mmc, struct mmc_request *mrq)
kunmap(page);
flush_dcache_page(page);
if (result) {
- dev_err(dev, "sdricoh_request: cmd %i "
- "block transfer failed\n", cmd->opcode);
+ dev_err(dev, "sdricoh_request: cmd %i block transfer failed\n",
+ cmd->opcode);
cmd->error = result;
break;
} else
@@ -476,8 +476,8 @@ static int sdricoh_pcmcia_probe(struct pcmcia_device *pcmcia_dev)
{
struct pci_dev *pci_dev = NULL;
- dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device"
- " %s %s ...\n", pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]);
+ dev_info(&pcmcia_dev->dev, "Searching MMC controller for pcmcia device %s %s ...\n",
+ pcmcia_dev->prod_id[0], pcmcia_dev->prod_id[1]);
/* search pci cardbus bridge that contains the mmc controller */
/* the io region is already claimed by yenta_socket... */
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index 55d6c60..d432597 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -787,9 +787,9 @@ static void tifm_sd_abort(unsigned long data)
{
struct tifm_sd *host = (struct tifm_sd*)data;
- pr_err("%s : card failed to respond for a long period of time "
- "(%x, %x)\n",
- dev_name(&host->dev->dev), host->req->cmd->opcode, host->cmd_flags);
+ pr_err("%s : card failed to respond for a long period of time (%x, %x)\n",
+ dev_name(&host->dev->dev),
+ host->req->cmd->opcode, host->cmd_flags);
tifm_eject(host->dev);
}
@@ -803,8 +803,7 @@ static void tifm_sd_ios(struct mmc_host *mmc, struct mmc_ios *ios)
spin_lock_irqsave(&sock->lock, flags);
- dev_dbg(&sock->dev, "ios: clock = %u, vdd = %x, bus_mode = %x, "
- "chip_select = %x, power_mode = %x, bus_width = %x\n",
+ dev_dbg(&sock->dev, "ios: clock = %u, vdd = %x, bus_mode = %x, chip_select = %x, power_mode = %x, bus_width = %x\n",
ios->clock, ios->vdd, ios->bus_mode, ios->chip_select,
ios->power_mode, ios->bus_width);
diff --git a/drivers/mmc/host/via-sdmmc.c b/drivers/mmc/host/via-sdmmc.c
index 4b83c43..dc479b0 100644
--- a/drivers/mmc/host/via-sdmmc.c
+++ b/drivers/mmc/host/via-sdmmc.c
@@ -8,6 +8,8 @@
* your option) any later version.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
@@ -838,8 +840,7 @@ static void via_sdc_cmd_isr(struct via_crdr_mmc_host *host, u16 intmask)
BUG_ON(intmask == 0);
if (!host->cmd) {
- pr_err("%s: Got command interrupt 0x%x even "
- "though no command operation was in progress.\n",
+ pr_err("%s: Got command interrupt 0x%x even though no command operation was in progress\n",
mmc_hostname(host->mmc), intmask);
return;
}
@@ -941,8 +942,8 @@ static void via_sdc_timeout(unsigned long ulongdata)
spin_lock_irqsave(&sdhost->lock, flags);
if (sdhost->mrq) {
- pr_err("%s: Timeout waiting for hardware interrupt."
- "cmd:0x%x\n", mmc_hostname(sdhost->mmc),
+ pr_err("%s: Timeout waiting for hardware interrupt.cmd:0x%x\n",
+ mmc_hostname(sdhost->mmc),
sdhost->mrq->cmd->opcode);
if (sdhost->data) {
@@ -1091,8 +1092,7 @@ static int __devinit via_sd_probe(struct pci_dev *pcidev,
u8 gatt;
int ret;
- pr_info(DRV_NAME
- ": VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n",
+ pr_info("VIA SDMMC controller found at %s [%04x:%04x] (rev %x)\n",
pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device,
(int)pcidev->revision);
@@ -1192,8 +1192,8 @@ static void __devexit via_sd_remove(struct pci_dev *pcidev)
mmiowb();
if (sdhost->mrq) {
- pr_err("%s: Controller removed during "
- "transfer\n", mmc_hostname(sdhost->mmc));
+ pr_err("%s: Controller removed during transfer\n",
+ mmc_hostname(sdhost->mmc));
/* make sure all DMA is stopped */
writel(VIA_CRDR_DMACTRL_SFTRST,
@@ -1225,8 +1225,7 @@ static void __devexit via_sd_remove(struct pci_dev *pcidev)
pci_release_regions(pcidev);
pci_disable_device(pcidev);
- pr_info(DRV_NAME
- ": VIA SDMMC controller at %s [%04x:%04x] has been removed\n",
+ pr_info("VIA SDMMC controller at %s [%04x:%04x] has been removed\n",
pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
}
@@ -1339,8 +1338,7 @@ static struct pci_driver via_sd_driver = {
static int __init via_sd_drv_init(void)
{
- pr_info(DRV_NAME ": VIA SD/MMC Card Reader driver "
- "(C) 2008 VIA Technologies, Inc.\n");
+ pr_info("VIA SD/MMC Card Reader driver (C) 2008 VIA Technologies, Inc.\n");
return pci_register_driver(&via_sd_driver);
}
diff --git a/drivers/mmc/host/vub300.c b/drivers/mmc/host/vub300.c
index e8f6e65..1908a25 100644
--- a/drivers/mmc/host/vub300.c
+++ b/drivers/mmc/host/vub300.c
@@ -35,6 +35,9 @@
* bits and driver data fields reflect that limit by using
* u8, u16, u32
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/init.h>
@@ -1257,9 +1260,8 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
}
} else {
dev_err(&vub300->udev->dev,
- "not enough memory for xfer buffer to send"
- " INTERRUPT_PSEUDOCODE for %s %s\n", fw->data,
- vub300->vub_name);
+ "not enough memory for xfer buffer to send INTERRUPT_PSEUDOCODE for %s %s\n",
+ fw->data, vub300->vub_name);
strncpy(vub300->vub_name,
"SDIO interrupt pseudocode download failed",
sizeof(vub300->vub_name));
@@ -1304,9 +1306,8 @@ static void __download_offload_pseudocode(struct vub300_mmc_host *vub300,
}
} else {
dev_err(&vub300->udev->dev,
- "not enough memory for xfer buffer to send"
- " TRANSFER_PSEUDOCODE for %s %s\n", fw->data,
- vub300->vub_name);
+ "not enough memory for xfer buffer to send TRANSFER_PSEUDOCODE for %s %s\n",
+ fw->data, vub300->vub_name);
strncpy(vub300->vub_name,
"SDIO transfer pseudocode download failed",
sizeof(vub300->vub_name));
@@ -2002,11 +2003,11 @@ static void __set_clock_speed(struct vub300_mmc_host *vub300, u8 buf[8],
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
0x00, 0x00, buf, buf_array_size, HZ);
if (retval != 8) {
- dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED"
- " %dkHz failed with retval=%d\n", kHzClock, retval);
+ dev_err(&vub300->udev->dev, "SET_CLOCK_SPEED %dkHz failed with retval=%d\n",
+ kHzClock, retval);
} else {
- dev_dbg(&vub300->udev->dev, "SET_CLOCK_SPEED"
- " %dkHz\n", kHzClock);
+ dev_dbg(&vub300->udev->dev, "SET_CLOCK_SPEED %dkHz\n",
+ kHzClock);
}
}
@@ -2251,8 +2252,7 @@ static int vub300_probe(struct usb_interface *interface,
endpoint->bEndpointAddress;
} else {
dev_warn(&vub300->udev->dev,
- "ignoring"
- " unexpected bulk_in endpoint");
+ "ignoring unexpected bulk_in endpoint\n");
}
} else if (usb_endpoint_is_bulk_out(endpoint)) {
if (!vub300->cmnd_out_ep) {
@@ -2263,20 +2263,18 @@ static int vub300_probe(struct usb_interface *interface,
endpoint->bEndpointAddress;
} else {
dev_warn(&vub300->udev->dev,
- "ignoring"
- " unexpected bulk_out endpoint");
+ "ignoring unexpected bulk_out endpoint\n");
}
} else {
dev_warn(&vub300->udev->dev,
- "vub300 ignoring EndPoint(%d) %02X", i,
- endpoint->bEndpointAddress);
+ "vub300 ignoring EndPoint(%d) %02X\n",
+ i, endpoint->bEndpointAddress);
}
}
if (vub300->cmnd_res_ep && vub300->cmnd_out_ep &&
vub300->data_inp_ep && vub300->data_out_ep) {
dev_info(&vub300->udev->dev,
- "vub300 %s packets"
- " using EndPoints %02X %02X %02X %02X\n",
+ "vub300 %s packets using EndPoints %02X %02X %02X %02X\n",
vub300->large_usb_packets ? "LARGE" : "SMALL",
vub300->cmnd_out_ep, vub300->cmnd_res_ep,
vub300->data_out_ep, vub300->data_inp_ep);
@@ -2341,13 +2339,11 @@ static int vub300_probe(struct usb_interface *interface,
add_timer(&vub300->inactivity_timer);
if (vub300->card_present)
dev_info(&vub300->udev->dev,
- "USB vub300 remote SDIO host controller[%d]"
- "connected with SD/SDIO card inserted\n",
+ "USB vub300 remote SDIO host controller[%d]connected with SD/SDIO card inserted\n",
interface_to_InterfaceNumber(interface));
else
dev_info(&vub300->udev->dev,
- "USB vub300 remote SDIO host controller[%d]"
- "connected with no SD/SDIO card inserted\n",
+ "USB vub300 remote SDIO host controller[%d]connected with no SD/SDIO card inserted\n",
interface_to_InterfaceNumber(interface));
mmc_add_host(mmc);
return 0;
@@ -2381,8 +2377,8 @@ static void vub300_disconnect(struct usb_interface *interface)
vub300->interface = NULL;
kref_put(&vub300->kref, vub300_delete);
mmc_remove_host(mmc);
- pr_info("USB vub300 remote SDIO host controller[%d]"
- " now disconnected", ifnum);
+ pr_info("USB remote SDIO host controller[%d] now disconnected\n",
+ ifnum);
return;
}
}
@@ -2448,29 +2444,29 @@ static int __init vub300_init(void)
{ /* NOT irq */
int result;
- pr_info("VUB300 Driver rom wait states = %02X irqpoll timeout = %04X",
+ pr_info("Driver rom wait states = %02X irqpoll timeout = %04X\n",
firmware_rom_wait_states, 0x0FFFF & firmware_irqpoll_timeout);
cmndworkqueue = create_singlethread_workqueue("kvub300c");
if (!cmndworkqueue) {
- pr_err("not enough memory for the REQUEST workqueue");
+ pr_err("not enough memory for the REQUEST workqueue\n");
result = -ENOMEM;
goto out1;
}
pollworkqueue = create_singlethread_workqueue("kvub300p");
if (!pollworkqueue) {
- pr_err("not enough memory for the IRQPOLL workqueue");
+ pr_err("not enough memory for the IRQPOLL workqueue\n");
result = -ENOMEM;
goto out2;
}
deadworkqueue = create_singlethread_workqueue("kvub300d");
if (!deadworkqueue) {
- pr_err("not enough memory for the EXPIRED workqueue");
+ pr_err("not enough memory for the EXPIRED workqueue\n");
result = -ENOMEM;
goto out3;
}
result = usb_register(&vub300_driver);
if (result) {
- pr_err("usb_register failed. Error number %d", result);
+ pr_err("usb_register failed. Error number %d\n", result);
goto out4;
}
return 0;
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index deaed8c..7536b50 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -721,9 +721,8 @@ static void wbsd_finish_data(struct wbsd_host *host, struct mmc_data *data)
* Any leftover data?
*/
if (count) {
- pr_err("%s: Incomplete DMA transfer. "
- "%d bytes left.\n",
- mmc_hostname(host->mmc), count);
+ pr_err("%s: Incomplete DMA transfer. %d bytes left.\n",
+ mmc_hostname(host->mmc), count);
if (!data->error)
data->error = -EIO;
--
1.7.6.405.gc1be0
More information about the linux-arm-kernel
mailing list