[PATCH 1/4] mmc: Update logging style
Joe Perches
joe at perches.com
Tue Nov 15 18:32:05 EST 2011
Convert pr_warning to pr_warn.
Coalesce format strings.
Align arguments.
Add missing \n.
Signed-off-by: Joe Perches <joe at perches.com>
---
drivers/mmc/card/block.c | 4 +-
drivers/mmc/card/queue.c | 6 +---
drivers/mmc/card/sdio_uart.c | 10 ++++----
drivers/mmc/core/bus.c | 4 +-
drivers/mmc/core/core.c | 9 +++----
drivers/mmc/core/mmc.c | 28 ++++++++++--------------
drivers/mmc/core/mmc_ops.c | 4 +-
drivers/mmc/core/sd.c | 46 +++++++++++++++++------------------------
drivers/mmc/core/sdio.c | 5 +--
drivers/mmc/core/sdio_bus.c | 4 +-
drivers/mmc/core/sdio_cis.c | 7 ++---
drivers/mmc/core/sdio_irq.c | 7 ++---
drivers/mmc/host/mmci.c | 5 +--
drivers/mmc/host/omap_hsmmc.c | 5 +--
drivers/mmc/host/s3cmci.c | 3 +-
drivers/mmc/host/sdhci.c | 18 +++++++---------
drivers/mmc/host/tifm_sd.c | 3 +-
drivers/mmc/host/wbsd.c | 24 ++++++++-------------
18 files changed, 82 insertions(+), 110 deletions(-)
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index c80bb6d..fe489b1 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -1238,8 +1238,8 @@ static int mmc_blk_issue_rw_rq(struct mmc_queue *mq, struct request *rqc)
case MMC_BLK_ECC_ERR:
if (brq->data.blocks > 1) {
/* Redo read one sector at a time */
- pr_warning("%s: retrying using single block read\n",
- req->rq_disk->disk_name);
+ pr_warn("%s: retrying using single block read\n",
+ req->rq_disk->disk_name);
disable_multi = 1;
break;
}
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index dcad59c..f1fd979 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -197,14 +197,12 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
if (bouncesz > 512) {
mqrq_cur->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
if (!mqrq_cur->bounce_buf) {
- pr_warning("%s: unable to "
- "allocate bounce cur buffer\n",
+ pr_warn("%s: unable to allocate bounce cur buffer\n",
mmc_card_name(card));
}
mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
if (!mqrq_prev->bounce_buf) {
- pr_warning("%s: unable to "
- "allocate bounce prev buffer\n",
+ pr_warn("%s: unable to allocate bounce prev buffer\n",
mmc_card_name(card));
kfree(mqrq_cur->bounce_buf);
mqrq_cur->bounce_buf = NULL;
diff --git a/drivers/mmc/card/sdio_uart.c b/drivers/mmc/card/sdio_uart.c
index 2c151e1..e264ee2 100644
--- a/drivers/mmc/card/sdio_uart.c
+++ b/drivers/mmc/card/sdio_uart.c
@@ -1082,8 +1082,8 @@ static int sdio_uart_probe(struct sdio_func *func,
return -ENOMEM;
if (func->class == SDIO_CLASS_UART) {
- pr_warning("%s: need info on UART class basic setup\n",
- sdio_func_id(func));
+ pr_warn("%s: need info on UART class basic setup\n",
+ sdio_func_id(func));
kfree(port);
return -ENOSYS;
} else if (func->class == SDIO_CLASS_GPS) {
@@ -1101,9 +1101,9 @@ static int sdio_uart_probe(struct sdio_func *func,
break;
}
if (!tpl) {
- pr_warning(
- "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
- sdio_func_id(func));
+ pr_warn(
+ "%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",
+ sdio_func_id(func));
kfree(port);
return -EINVAL;
}
diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c
index 6be4924..2e1f028 100644
--- a/drivers/mmc/core/bus.c
+++ b/drivers/mmc/core/bus.c
@@ -303,10 +303,10 @@ int mmc_add_card(struct mmc_card *card)
mmc_card_ddr_mode(card) ? "DDR " : "",
type);
} else {
- printk(KERN_INFO "%s: new %s%s%s card at address %04x\n",
+ pr_info("%s: new %s%s%s card at address %04x\n",
mmc_hostname(card->host),
mmc_sd_card_uhs(card) ? "ultra high speed " :
- (mmc_card_highspeed(card) ? "high speed " : ""),
+ mmc_card_highspeed(card) ? "high speed " : "",
mmc_card_ddr_mode(card) ? "DDR " : "",
type, card->rca);
}
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 74a012a..54d6a13 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1163,8 +1163,8 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
mmc_set_ios(host);
mmc_host_clk_release(host);
} else {
- pr_warning("%s: host doesn't support card's voltages\n",
- mmc_hostname(host));
+ pr_warn("%s: host doesn't support card's voltages\n",
+ mmc_hostname(host));
ocr = 0;
}
@@ -2375,9 +2375,8 @@ int mmc_resume_host(struct mmc_host *host)
BUG_ON(!host->bus_ops->resume);
err = host->bus_ops->resume(host);
if (err) {
- pr_warning("%s: error %d during resume "
- "(card was removed?)\n",
- mmc_hostname(host), err);
+ pr_warn("%s: error %d during resume (card was removed?)\n",
+ mmc_hostname(host), err);
err = 0;
}
}
diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
index 90de9ba..bbd7adb 100644
--- a/drivers/mmc/core/mmc.c
+++ b/drivers/mmc/core/mmc.c
@@ -223,9 +223,7 @@ static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
"Card will be ignored.\n",
mmc_hostname(card->host));
} else {
- pr_warning("%s: unable to read "
- "EXT_CSD, performance might "
- "suffer.\n",
+ pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
mmc_hostname(card->host));
err = 0;
}
@@ -309,8 +307,7 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
break;
default:
/* MMC v4 spec says this cannot happen */
- pr_warning("%s: card is mmc v4 but doesn't "
- "support any high-speed modes.\n",
+ pr_warn("%s: card is mmc v4 but doesn't support any high-speed modes\n",
mmc_hostname(card->host));
}
@@ -664,8 +661,8 @@ static int mmc_select_powerclass(struct mmc_card *card,
index = EXT_CSD_PWR_CL_200_360;
break;
default:
- pr_warning("%s: Voltage range not supported "
- "for power class.\n", mmc_hostname(host));
+ pr_warn("%s: Voltage range not supported for power class\n",
+ mmc_hostname(host));
return -EINVAL;
}
@@ -904,8 +901,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
goto free_card;
if (err) {
- pr_warning("%s: switch to highspeed failed\n",
- mmc_hostname(card->host));
+ pr_warn("%s: switch to highspeed failed\n",
+ mmc_hostname(card->host));
err = 0;
} else {
mmc_card_set_highspeed(card);
@@ -922,8 +919,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
if (err && err != -EBADMSG)
goto free_card;
if (err) {
- pr_warning("%s: Enabling HPI failed\n",
- mmc_hostname(card->host));
+ pr_warn("%s: Enabling HPI failed\n",
+ mmc_hostname(card->host));
err = 0;
} else
card->ext_csd.hpi_en = 1;
@@ -1029,8 +1026,8 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr,
card->ext_csd.generic_cmd6_time);
}
if (err) {
- pr_warning("%s: switch to bus width %d ddr %d "
- "failed\n", mmc_hostname(card->host),
+ pr_warn("%s: switch to bus width %d ddr %d failed\n",
+ mmc_hostname(card->host),
1 << bus_width, ddr);
goto free_card;
} else if (ddr) {
@@ -1284,9 +1281,8 @@ int mmc_attach_mmc(struct mmc_host *host)
* support.
*/
if (ocr & 0x7F) {
- pr_warning("%s: card claims to support voltages "
- "below the defined range. These will be ignored.\n",
- mmc_hostname(host));
+ pr_warn("%s: card claims to support voltages below the defined range. These will be ignored.\n",
+ mmc_hostname(host));
ocr &= ~0x7F;
}
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c
index 4d41fa9..32deb3e 100644
--- a/drivers/mmc/core/mmc_ops.c
+++ b/drivers/mmc/core/mmc_ops.c
@@ -415,8 +415,8 @@ int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
return -EBADMSG;
} else {
if (status & 0xFDFFA000)
- pr_warning("%s: unexpected status %#x after "
- "switch", mmc_hostname(card->host), status);
+ pr_warn("%s: unexpected status %#x after switch\n",
+ mmc_hostname(card->host), status);
if (status & R1_SWITCH_ERROR)
return -EBADMSG;
}
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index f54392c..52a1563 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -219,8 +219,8 @@ static int mmc_read_ssr(struct mmc_card *card)
u32 *ssr;
if (!(card->csd.cmdclass & CCC_APP_SPEC)) {
- pr_warning("%s: card lacks mandatory SD Status "
- "function.\n", mmc_hostname(card->host));
+ pr_warn("%s: card lacks mandatory SD Status function\n",
+ mmc_hostname(card->host));
return 0;
}
@@ -230,8 +230,8 @@ static int mmc_read_ssr(struct mmc_card *card)
err = mmc_app_sd_status(card, ssr);
if (err) {
- pr_warning("%s: problem reading SD Status "
- "register.\n", mmc_hostname(card->host));
+ pr_warn("%s: problem reading SD Status register\n",
+ mmc_hostname(card->host));
err = 0;
goto out;
}
@@ -254,8 +254,8 @@ static int mmc_read_ssr(struct mmc_card *card)
card->ssr.erase_offset = eo * 1000;
}
} else {
- pr_warning("%s: SD Status: Invalid Allocation Unit "
- "size.\n", mmc_hostname(card->host));
+ pr_warn("%s: SD Status: Invalid Allocation Unit size\n",
+ mmc_hostname(card->host));
}
out:
kfree(ssr);
@@ -274,8 +274,7 @@ static int mmc_read_switch(struct mmc_card *card)
return 0;
if (!(card->csd.cmdclass & CCC_SWITCH)) {
- pr_warning("%s: card lacks mandatory switch "
- "function, performance might suffer.\n",
+ pr_warn("%s: card lacks mandatory switch function, performance might suffer\n",
mmc_hostname(card->host));
return 0;
}
@@ -300,7 +299,7 @@ static int mmc_read_switch(struct mmc_card *card)
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- pr_warning("%s: problem reading Bus Speed modes.\n",
+ pr_warn("%s: problem reading Bus Speed modes.\n",
mmc_hostname(card->host));
err = 0;
@@ -323,8 +322,7 @@ static int mmc_read_switch(struct mmc_card *card)
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- pr_warning("%s: problem reading "
- "Driver Strength.\n",
+ pr_warn("%s: problem reading Driver Strength\n",
mmc_hostname(card->host));
err = 0;
@@ -343,8 +341,7 @@ static int mmc_read_switch(struct mmc_card *card)
if (err != -EINVAL && err != -ENOSYS && err != -EFAULT)
goto out;
- pr_warning("%s: problem reading "
- "Current Limit.\n",
+ pr_warn("%s: problem reading Current Limit\n",
mmc_hostname(card->host));
err = 0;
@@ -394,8 +391,7 @@ int mmc_sd_switch_hs(struct mmc_card *card)
goto out;
if ((status[16] & 0xF) != 1) {
- pr_warning("%s: Problem switching card "
- "into high-speed mode!\n",
+ pr_warn("%s: Problem switching card into high-speed mode!\n",
mmc_hostname(card->host));
err = 0;
} else {
@@ -460,7 +456,7 @@ static int sd_select_driver_type(struct mmc_card *card, u8 *status)
return err;
if ((status[15] & 0xF) != drive_strength) {
- pr_warning("%s: Problem setting drive strength!\n",
+ pr_warn("%s: Problem setting drive strength!\n",
mmc_hostname(card->host));
return 0;
}
@@ -539,7 +535,7 @@ static int sd_set_bus_speed_mode(struct mmc_card *card, u8 *status)
return err;
if ((status[16] & 0xF) != card->sd_bus_speed)
- pr_warning("%s: Problem setting bus speed mode!\n",
+ pr_warn("%s: Problem setting bus speed mode!\n",
mmc_hostname(card->host));
else {
mmc_set_timing(card->host, timing);
@@ -601,7 +597,7 @@ static int sd_set_current_limit(struct mmc_card *card, u8 *status)
return err;
if (((status[15] >> 4) & 0x0F) != current_limit)
- pr_warning("%s: Problem setting current limit!\n",
+ pr_warn("%s: Problem setting current limit!\n",
mmc_hostname(card->host));
return 0;
@@ -853,9 +849,7 @@ int mmc_sd_setup_card(struct mmc_host *host, struct mmc_card *card,
ro = host->ops->get_ro(host);
if (ro < 0) {
- pr_warning("%s: host does not "
- "support reading read-only "
- "switch. assuming write-enable.\n",
+ pr_warn("%s: host does not support reading read-only switch. assuming write-enable.\n",
mmc_hostname(host));
} else if (ro > 0) {
mmc_card_set_readonly(card);
@@ -1167,17 +1161,15 @@ int mmc_attach_sd(struct mmc_host *host)
* support.
*/
if (ocr & 0x7F) {
- pr_warning("%s: card claims to support voltages "
- "below the defined range. These will be ignored.\n",
- mmc_hostname(host));
+ pr_warn("%s: card claims to support voltages below the defined range. These will be ignored.\n",
+ mmc_hostname(host));
ocr &= ~0x7F;
}
if ((ocr & MMC_VDD_165_195) &&
!(host->ocr_avail_sd & MMC_VDD_165_195)) {
- pr_warning("%s: SD card claims to support the "
- "incompletely defined 'low voltage range'. This "
- "will be ignored.\n", mmc_hostname(host));
+ pr_warn("%s: SD card claims to support the incompletely defined 'low voltage range'. This will be ignored.\n",
+ mmc_hostname(host));
ocr &= ~MMC_VDD_165_195;
}
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index 3ab565e..e994a89 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -777,9 +777,8 @@ int mmc_attach_sdio(struct mmc_host *host)
* support.
*/
if (ocr & 0x7F) {
- pr_warning("%s: card claims to support voltages "
- "below the defined range. These will be ignored.\n",
- mmc_hostname(host));
+ pr_warn("%s: card claims to support voltages below the defined range. These will be ignored.\n",
+ mmc_hostname(host));
ocr &= ~0x7F;
}
diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
index 40989e6..3d82f12 100644
--- a/drivers/mmc/core/sdio_bus.c
+++ b/drivers/mmc/core/sdio_bus.c
@@ -174,8 +174,8 @@ static int sdio_bus_remove(struct device *dev)
drv->remove(func);
if (func->irq_handler) {
- pr_warning("WARNING: driver %s did not remove "
- "its interrupt handler!\n", drv->name);
+ pr_warn("WARNING: driver %s did not remove its interrupt handler!\n",
+ drv->name);
sdio_claim_host(func);
sdio_release_irq(func);
sdio_release_host(func);
diff --git a/drivers/mmc/core/sdio_cis.c b/drivers/mmc/core/sdio_cis.c
index f1c7ed8..6536fce 100644
--- a/drivers/mmc/core/sdio_cis.c
+++ b/drivers/mmc/core/sdio_cis.c
@@ -313,10 +313,9 @@ static int sdio_read_cis(struct mmc_card *card, struct sdio_func *func)
if (ret == -ENOENT) {
/* warn about unknown tuples */
- pr_warning("%s: queuing unknown"
- " CIS tuple 0x%02x (%u bytes)\n",
- mmc_hostname(card->host),
- tpl_code, tpl_link);
+ pr_warn("%s: queuing unknown CIS tuple 0x%02x (%u bytes)\n",
+ mmc_hostname(card->host),
+ tpl_code, tpl_link);
}
/* keep on analyzing tuples */
diff --git a/drivers/mmc/core/sdio_irq.c b/drivers/mmc/core/sdio_irq.c
index 68f81b9..bc9e67a 100644
--- a/drivers/mmc/core/sdio_irq.c
+++ b/drivers/mmc/core/sdio_irq.c
@@ -56,16 +56,15 @@ static int process_sdio_pending_irqs(struct mmc_card *card)
if (pending & (1 << i)) {
func = card->sdio_func[i - 1];
if (!func) {
- pr_warning("%s: pending IRQ for "
- "non-existent function\n",
+ pr_warn("%s: pending IRQ for non-existent function\n",
mmc_card_id(card));
ret = -EINVAL;
} else if (func->irq_handler) {
func->irq_handler(func);
count++;
} else {
- pr_warning("%s: pending IRQ with no handler\n",
- sdio_func_id(func));
+ pr_warn("%s: pending IRQ with no handler\n",
+ sdio_func_id(func));
ret = -EINVAL;
}
}
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 50b5f99..0ea9935 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -466,9 +466,8 @@ static void mmci_get_next_data(struct mmci_host *host, struct mmc_data *data)
struct mmci_host_next *next = &host->next_data;
if (data->host_cookie && data->host_cookie != next->cookie) {
- pr_warning("[%s] invalid cookie: data->host_cookie %d"
- " host->next_data.cookie %d\n",
- __func__, data->host_cookie, host->next_data.cookie);
+ pr_warn("[%s] invalid cookie: data->host_cookie %d host->next_data.cookie %d\n",
+ __func__, data->host_cookie, host->next_data.cookie);
data->host_cookie = 0;
}
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index d5fe43d..1455bd6 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1422,9 +1422,8 @@ static int omap_hsmmc_pre_dma_transfer(struct omap_hsmmc_host *host,
if (!next && data->host_cookie &&
data->host_cookie != host->next_data.cookie) {
- pr_warning("[%s] invalid cookie: data->host_cookie %d"
- " host->next_data.cookie %d\n",
- __func__, data->host_cookie, host->next_data.cookie);
+ pr_warn("[%s] invalid cookie: data->host_cookie %d host->next_data.cookie %d\n",
+ __func__, data->host_cookie, host->next_data.cookie);
data->host_cookie = 0;
}
diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c
index 720f993..6da27c0 100644
--- a/drivers/mmc/host/s3cmci.c
+++ b/drivers/mmc/host/s3cmci.c
@@ -983,7 +983,8 @@ static int s3cmci_setup_data(struct s3cmci_host *host, struct mmc_data *data)
* one block being transferred. */
if (data->blocks > 1) {
- pr_warning("%s: can't do non-word sized block transfers (blksz %d)\n", __func__, data->blksz);
+ pr_warn("%s: can't do non-word sized block transfers (blksz %d)\n",
+ __func__, data->blksz);
return -EINVAL;
}
}
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index a7c2311..d146bff 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -677,8 +677,8 @@ static u8 sdhci_calc_timeout(struct sdhci_host *host, struct mmc_command *cmd)
}
if (count >= 0xF) {
- pr_warning("%s: Too large timeout requested for CMD%d!\n",
- mmc_hostname(host->mmc), cmd->opcode);
+ pr_warn("%s: Too large timeout requested for CMD%d!\n",
+ mmc_hostname(host->mmc), cmd->opcode);
count = 0xE;
}
@@ -2237,8 +2237,8 @@ static irqreturn_t sdhci_irq(int irq, void *dev_id)
if (host->runtime_suspended) {
spin_unlock(&host->lock);
- pr_warning("%s: got irq while runtime suspended\n",
- mmc_hostname(host->mmc));
+ pr_warn("%s: got irq while runtime suspended\n",
+ mmc_hostname(host->mmc));
return IRQ_HANDLED;
}
@@ -2585,8 +2585,7 @@ int sdhci_add_host(struct sdhci_host *host)
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma) {
if (host->ops->enable_dma(host)) {
- pr_warning("%s: No suitable DMA "
- "available. Falling back to PIO.\n",
+ pr_warn("%s: No suitable DMA available. Falling back to PIO.\n",
mmc_hostname(mmc));
host->flags &=
~(SDHCI_USE_SDMA | SDHCI_USE_ADMA);
@@ -2605,8 +2604,7 @@ int sdhci_add_host(struct sdhci_host *host)
if (!host->adma_desc || !host->align_buffer) {
kfree(host->adma_desc);
kfree(host->align_buffer);
- pr_warning("%s: Unable to allocate ADMA "
- "buffers. Falling back to standard DMA.\n",
+ pr_warn("%s: Unable to allocate ADMA buffers. Falling back to standard DMA.\n",
mmc_hostname(mmc));
host->flags &= ~SDHCI_USE_ADMA;
}
@@ -2895,8 +2893,8 @@ int sdhci_add_host(struct sdhci_host *host)
mmc->max_blk_size = (caps[0] & SDHCI_MAX_BLOCK_MASK) >>
SDHCI_MAX_BLOCK_SHIFT;
if (mmc->max_blk_size >= 3) {
- pr_warning("%s: Invalid maximum block size, "
- "assuming 512 bytes\n", mmc_hostname(mmc));
+ pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n",
+ mmc_hostname(mmc));
mmc->max_blk_size = 0;
}
}
diff --git a/drivers/mmc/host/tifm_sd.c b/drivers/mmc/host/tifm_sd.c
index f70d046..55d6c60 100644
--- a/drivers/mmc/host/tifm_sd.c
+++ b/drivers/mmc/host/tifm_sd.c
@@ -952,8 +952,7 @@ static int tifm_sd_probe(struct tifm_dev *sock)
if (!(TIFM_SOCK_STATE_OCCUPIED
& readl(sock->addr + SOCK_PRESENT_STATE))) {
- pr_warning("%s : card gone, unexpectedly\n",
- dev_name(&sock->dev));
+ pr_warn("%s : card gone, unexpectedly\n", dev_name(&sock->dev));
return rc;
}
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index 64acd9c..a4944c8e 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -803,8 +803,7 @@ static void wbsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
default:
#ifdef CONFIG_MMC_DEBUG
- pr_warning("%s: Data command %d is not "
- "supported by this controller.\n",
+ pr_warn("%s: Data command %d is not supported by this controller\n",
mmc_hostname(host->mmc), cmd->opcode);
#endif
cmd->error = -EINVAL;
@@ -1429,8 +1428,8 @@ free:
free_dma(dma);
err:
- pr_warning(DRIVER_NAME ": Unable to allocate DMA %d. "
- "Falling back on FIFO.\n", dma);
+ pr_warn(DRIVER_NAME ": Unable to allocate DMA %d. Falling back on FIFO.\n",
+ dma);
}
static void wbsd_release_dma(struct wbsd_host *host)
@@ -1664,9 +1663,8 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma,
ret = wbsd_scan(host);
if (ret) {
if (pnp && (ret == -ENODEV)) {
- pr_warning(DRIVER_NAME
- ": Unable to confirm device presence. You may "
- "experience lock-ups.\n");
+ pr_warn(DRIVER_NAME
+ ": Unable to confirm device presence. You may experience lock-ups.\n");
} else {
wbsd_free_mmc(dev);
return ret;
@@ -1688,10 +1686,8 @@ static int __devinit wbsd_init(struct device *dev, int base, int irq, int dma,
*/
if (pnp) {
if ((host->config != 0) && !wbsd_chip_validate(host)) {
- pr_warning(DRIVER_NAME
- ": PnP active but chip not configured! "
- "You probably have a buggy BIOS. "
- "Configuring chip manually.\n");
+ pr_warn(DRIVER_NAME
+ ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");
wbsd_chip_config(host);
}
} else
@@ -1909,10 +1905,8 @@ static int wbsd_pnp_resume(struct pnp_dev *pnp_dev)
*/
if (host->config != 0) {
if (!wbsd_chip_validate(host)) {
- pr_warning(DRIVER_NAME
- ": PnP active but chip not configured! "
- "You probably have a buggy BIOS. "
- "Configuring chip manually.\n");
+ pr_warn(DRIVER_NAME
+ ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");
wbsd_chip_config(host);
}
}
--
1.7.6.405.gc1be0
More information about the linux-arm-kernel
mailing list