[PATCH] distclean: Remove generated .dtb files

[Grant Likely]

On Sat, Nov 05, 2011 at 07:19:15AM +0100, Dirk Behme wrote:
> The patch 'arm/dt: Add dtb make rule' adds support to
> create a .dtb file. But this is never removed afterwards.
> Remove the generated .dtb file if 'distclean' is called.
> 
> Signed-off-by: Dirk Behme <dirk.behme at de.bosch.com>
> CC: Rob Herring <rob.herring at calxeda.com>
> CC: Shawn Guo <shawn.guo at freescale.com>
> CC: Jason Liu <jason.hui at linaro.org>
> CC: Grant Likely <grant.likely at secretlab.ca>

Acked-by: Grant Likely <grant.likely at secretlab.ca>

> ---
>  arch/arm/boot/Makefile |    2 ++
>  1 files changed, 2 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
> index 1cd9b0a..08f0d35 100644
> --- a/arch/arm/boot/Makefile
> +++ b/arch/arm/boot/Makefile
> @@ -71,6 +71,8 @@ $(obj)/%.dtb: $(src)/dts/%.dts
>  
>  $(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
>  
> +clean-files := *.dtb
> +
>  quiet_cmd_uimage = UIMAGE  $@
>        cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \
>  		   -C none -a $(LOADADDR) -e $(STARTADDR) \
> -- 
> 1.7.0.4
>