[alsa-devel] [PATCH v6 0/3] ARM: mxs: add recording support for saif

[Dong Aisheng-B29396]

> -----Original Message-----
> From: Marek Vasut [mailto:marek.vasut at gmail.com]
> Sent: Monday, November 21, 2011 4:51 PM
> To: alsa-devel at alsa-project.org
> Cc: Dong Aisheng-B29396; linux-arm-kernel at lists.infradead.org;
> s.hauer at pengutronix.de; broonie at opensource.wolfsonmicro.com;
> w.sang at pengutronix.de; kernel at pengutronix.de; u.kleine-
> koenig at pengutronix.de; lrg at ti.com; Guo Shawn-R65073
> Subject: Re: [alsa-devel] [PATCH v6 0/3] ARM: mxs: add recording support
> for saif
> 
> > Changes since v5:
> >  Only one change is that:
> >  * remove the unneccesary parenthesis for [PATCH 1/3] suggested
> >    by Marek Vasut.
> >
> > Changes since v4:
> >  * use new added master_id and master_mode in platform_data.
> >  The new changes depend on another patch:
> >  0001-ASoC-mxs-saif-remove-function-in-platform_data.patch
> >
> > Changes since v3:
> >  * remove unneeded locking according to Sascha.
> > The patches are based on imx-features branch since commit:
> > ca4e419c2.
> >
> > Changes since v2:
> >  * separate clkmux code into another patch according to Uwe
> >  * add lock according to Wolfram
> >  * Other minus fixes suggested by Uwe and Wolfram.
> >  * remove Wolfram's fix saif clock setting patch which is in v2 series
> >    since Wolfram will reform the clock code and send it out himself.
> >    For test purpose, user still needs that patch. People can get it
> >    from v2 series.
> >    The patch is:
> >    [PATCH v2 3/3] arm: mxs: disable clock-gates when setting
> > saif-clocks
> >
> > The patches are based on imx-features branch since commit:
> > f4f01e31835f.
> >
> > Changes since v1:
> > The main changes are move mach-specific code(clkmux in DIGCTL) from
> > saif driver to mach-specific layer based on Wolfram's suggestion.
> >
> > Note that the last patch is a RFC patch and sent out for testing since
> > without that patch the saif may not work.
> >
> > Dong Aisheng (3):
> >   ARM: mxs: add saif clkmux functions
> >   ARM: mx28evk: add platform data for saif
> >   ARM: mx28evk: set a initial clock rate for saif
> >
> >  arch/arm/mach-mxs/clock-mx28.c                  |   38
> > +++++++++++++++++++++++ arch/arm/mach-mxs/devices-mx28.h
> |
> >   3 +-
> >  arch/arm/mach-mxs/devices/platform-mxs-saif.c   |    5 ++-
> >  arch/arm/mach-mxs/include/mach/common.h         |    1 +
> >  arch/arm/mach-mxs/include/mach/devices-common.h |    4 ++-
> >  arch/arm/mach-mxs/include/mach/digctl.h         |   21 ++++++++++++
> >  arch/arm/mach-mxs/mach-mx28evk.c                |   18 +++++++++-
> >  7 files changed, 84 insertions(+), 6 deletions(-)  create mode 100644
> > arch/arm/mach-mxs/include/mach/digctl.h
> >
> 
> I think you can add my:
> 
> Acked-by: Marek Vasut <marek.vasut at gmail.com>
> 
> to the series.

Thanks a lot.

Regards
Dong Aisheng