[PATCH] USB: ehci-mxc: get rid of the uses of cpu_is_mx()

[Lothar Waßmann]

Hi,

Peter Chen writes:
> The patch removes all the uses of cpu_is_mx().  Instead, it utilizes
> platform_device_id to distinguish the ehci differences among SoCs.
> It can be useful to imx ehci submission and device tree support later.
> 
>
As the EHCI core is equivalent on all SoCs but only require different
clocks on each platform I think it's overkill to use platform_ids to
distinguish the SoCs. Indeed there is actually no need to make any
distinction in the driver, as you could simply provide the same set of
clocks on all platforms with some of them being dummy clocks on
certain platforms:
clock-imx25.c and clock-imx35.c:
	_REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
	_REGISTER_CLOCK("mxc-ehci.0", "system_bus", dummy_clk)
	_REGISTER_CLOCK("mxc-ehci.0", "usb_phy", dummy_clk)
	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
	_REGISTER_CLOCK("mxc-ehci.1", "system_bus", dummy_clk)
	_REGISTER_CLOCK("mxc-ehci.1", "usb_phy", dummy_clk)
	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
	_REGISTER_CLOCK("mxc-ehci.2", "system_bus", dummy_clk)
	_REGISTER_CLOCK("mxc-ehci.2", "usb_phy", dummy_clk)
clock-imx27.c:
	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
	_REGISTER_CLOCK("mxc-ehci.0", "system_bus", usb_clk1)
	_REGISTER_CLOCK("mxc-ehci.0", "usb_phy", dummy_clk)
	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
	_REGISTER_CLOCK("mxc-ehci.1", "system_bus", usb_clk1)
	_REGISTER_CLOCK("mxc-ehci.1", "usb_phy", dummy_clk)
	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
	_REGISTER_CLOCK("mxc-ehci.2", "system_bus", usb_clk1)
	_REGISTER_CLOCK("mxc-ehci.2", "usb_phy", dummy_clk)
clock-imx31.c:
	_REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
	_REGISTER_CLOCK("mxc-ehci.0", "system_bus", usb_clk2)
	_REGISTER_CLOCK("mxc-ehci.0", "usb_phy", dummy_clk)
	_REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
	_REGISTER_CLOCK("mxc-ehci.1", "system_bus", usb_clk2)
	_REGISTER_CLOCK("mxc-ehci.1", "usb_phy", dummy_clk)
	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
	_REGISTER_CLOCK("mxc-ehci.2", "system_bus", usb_clk2)
	_REGISTER_CLOCK("mxc-ehci.2", "usb_phy", dummy_clk)
clock-mx51-mx53.c:
	_REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
	_REGISTER_CLOCK("mxc-ehci.0", "system_bus", usb_ahb_clk)
	_REGISTER_CLOCK("mxc-ehci.0", "usb_phy", usb_phy1_clk)
	_REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
	_REGISTER_CLOCK("mxc-ehci.1", "system_bus", usb_ahb_clk)
	_REGISTER_CLOCK("mxc-ehci.1", "usb_phy", dummy_clk)
	_REGISTER_CLOCK("mxc-ehci.2", "usb", usboh3_clk)
	_REGISTER_CLOCK("mxc-ehci.2", "system_bus", usb_ahb_clk)
	_REGISTER_CLOCK("mxc-ehci.2", "usb_phy", dummy_clk)


In the driver you would then do a clk_get() for those three clocks
independent of the platform.


Lothar Waßmann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________