[PATCH 2/3] ARM: AT91: IIO: Add AT91 ADC driver.

Maxime Ripard maxime.ripard at free-electrons.com
Thu Nov 3 06:11:09 EDT 2011


Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
Cc: Patrice Vilchez <patrice.vilchez at atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj at jcrosoft.com>
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 drivers/staging/iio/adc/Kconfig   |    6 +
 drivers/staging/iio/adc/Makefile  |    1 +
 drivers/staging/iio/adc/at91adc.c |  310 +++++++++++++++++++++++++++++++++++++
 3 files changed, 317 insertions(+), 0 deletions(-)
 create mode 100644 drivers/staging/iio/adc/at91adc.c

diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
index d9decea..c384894 100644
--- a/drivers/staging/iio/adc/Kconfig
+++ b/drivers/staging/iio/adc/Kconfig
@@ -169,6 +169,12 @@ config AD7280
 	  To compile this driver as a module, choose M here: the
 	  module will be called ad7280a
 
+config AT91ADC
+	tristate "Atmel AT91 ADC"
+	depends on SYSFS && ARCH_AT91
+	help
+	  Say yes here to build support for Atmel AT91 ADC.
+
 config MAX1363
 	tristate "Maxim max1363 ADC driver"
 	depends on I2C
diff --git a/drivers/staging/iio/adc/Makefile b/drivers/staging/iio/adc/Makefile
index ceee7f3..d250d06 100644
--- a/drivers/staging/iio/adc/Makefile
+++ b/drivers/staging/iio/adc/Makefile
@@ -37,3 +37,4 @@ obj-$(CONFIG_AD7192) += ad7192.o
 obj-$(CONFIG_ADT7310) += adt7310.o
 obj-$(CONFIG_ADT7410) += adt7410.o
 obj-$(CONFIG_AD7280) += ad7280a.o
+obj-$(CONFIG_AT91ADC) += at91adc.o
diff --git a/drivers/staging/iio/adc/at91adc.c b/drivers/staging/iio/adc/at91adc.c
new file mode 100644
index 0000000..acf656d
--- /dev/null
+++ b/drivers/staging/iio/adc/at91adc.c
@@ -0,0 +1,310 @@
+/*
+ * Driver for the TouchScreen ADC Controller present in the Atmel AT91
+ * evaluation boards.
+ *
+ * Copyright 2011 Free Electrons
+ *
+ * Licensed under the GPLv2 or later.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+
+#include "../iio.h"
+
+#include <mach/at91_adc.h>
+#include <mach/board.h>
+
+#define at91adc_reg_read(base, reg)        readl_relaxed((base) + (reg))
+#define at91adc_reg_write(base, reg, val)  writel_relaxed((val), (base) + (reg))
+
+struct at91adc_state {
+	struct clk *clk;
+	bool done;
+	struct mutex lock;
+	struct iio_chan_spec *channels;
+	int nb_chan;
+	int irq;
+	wait_queue_head_t wq_data_avail;
+	u16 lcdr;
+	void __iomem *reg_base;
+	unsigned int vref_mv;
+};
+
+static irqreturn_t at91adc_eoc_trigger(int irq, void *private)
+{
+	int chan;
+	struct at91adc_state *st = private;
+	unsigned int status = at91adc_reg_read(st->reg_base, AT91_ADC_SR);
+
+	if (!(status & AT91_ADC_DRDY))
+		return IRQ_HANDLED;
+
+	for (chan = 0; chan < st->nb_chan; chan++) {
+		if (status & AT91_ADC_EOC(chan)) {
+			st->done = true;
+			st->lcdr = at91adc_reg_read(st->reg_base,
+						    AT91_ADC_CHR(chan));
+		}
+	}
+	wake_up_interruptible(&st->wq_data_avail);
+
+	return IRQ_HANDLED;
+}
+
+static int at91adc_channel_init(struct at91adc_state *st,
+				struct at91_adc_data *pdata)
+{
+	int i, idx = 0;
+	st->channels = kcalloc(pdata->num_channels_used,
+			       sizeof(struct iio_chan_spec), GFP_KERNEL);
+	if (st->channels == NULL)
+		return -ENOMEM;
+
+	for (i = 0; i < st->nb_chan; i++) {
+		if(pdata->channels_used[i]) {
+			struct iio_chan_spec *chan = st->channels + idx;
+			chan->type = IIO_VOLTAGE;
+			chan->indexed = 1;
+			chan->channel = i;
+			chan->scan_type.sign = 's';
+			chan->scan_type.realbits = 10;
+			chan->scan_type.storagebits = 32;
+			chan->scan_type.shift = 0;
+			chan->info_mask = IIO_CHAN_INFO_SCALE_SHARED_BIT;
+			++idx;
+		}
+	}
+
+	return st->nb_chan;
+}
+
+static int at91adc_read_raw(struct iio_dev *idev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct at91adc_state *st = iio_priv(idev);
+	unsigned int scale_uv;
+
+	switch (mask) {
+	case 0:
+		mutex_lock(&st->lock);
+
+		at91adc_reg_write(st->reg_base, AT91_ADC_CHER,
+				  AT91_ADC_CH(chan->channel));
+		at91adc_reg_write(st->reg_base, AT91_ADC_IER,
+				  AT91_ADC_EOC(chan->channel));
+		at91adc_reg_write(st->reg_base, AT91_ADC_CR, AT91_ADC_START);
+
+		wait_event_interruptible_timeout(st->wq_data_avail, st->done,
+						 msecs_to_jiffies(10 * 1000));
+		*val = st->lcdr;
+
+		at91adc_reg_write(st->reg_base, AT91_ADC_CHDR,
+				  AT91_ADC_CH(chan->channel));
+		at91adc_reg_write(st->reg_base, AT91_ADC_IDR,
+				  AT91_ADC_EOC(chan->channel));
+
+		st->lcdr = 0;
+		st->done = false;
+		mutex_unlock(&st->lock);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		scale_uv = (st->vref_mv * 1000) >> chan->scan_type.realbits;
+		*val = scale_uv / 1000;
+		*val2 = (scale_uv % 1000) * 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		break;
+	}
+	return -EINVAL;
+}
+
+static const struct iio_info at91adc_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &at91adc_read_raw,
+};
+
+static int __devinit at91adc_probe(struct platform_device *pdev)
+{
+	unsigned int prsc, mstrclk, ticks;
+	int ret;
+	struct iio_dev *idev;
+	struct at91adc_state *st;
+	struct resource *res;
+	struct at91_adc_data *pdata = pdev->dev.platform_data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "No resource defined\n");
+		ret = -ENXIO;
+		goto error_ret;
+	}
+
+	idev = iio_allocate_device(sizeof(struct at91adc_state));
+	if (idev == NULL) {
+		dev_err(&pdev->dev, "Failed to allocate memory.\n");
+		ret = -ENOMEM;
+		goto error_ret;
+	}
+	platform_set_drvdata(pdev, idev);
+
+	idev->dev.parent = &pdev->dev;
+	idev->name = dev_name(&pdev->dev);
+	idev->modes = INDIO_DIRECT_MODE;
+	idev->info = &at91adc_info;
+
+	st = iio_priv(idev);
+	st->irq = platform_get_irq(pdev, 0);
+	if (st->irq < 0) {
+		dev_err(&pdev->dev, "No IRQ ID is designated\n");
+		ret = -ENODEV;
+		goto error_free_device;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res),
+				"AT91 adc registers")) {
+		dev_err(&pdev->dev, "Resources are unavailable.\n");
+		ret = -EBUSY;
+		goto error_free_device;
+	}
+
+	st->reg_base = ioremap(res->start, resource_size(res));
+	if (!st->reg_base) {
+		dev_err(&pdev->dev, "Failed to map registers.\n");
+		ret = -ENOMEM;
+		goto error_release_mem;
+	}
+
+	/*
+	 * Disable all IRQs before setting up the handler
+	 */
+	at91adc_reg_write(st->reg_base, AT91_ADC_CR, AT91_ADC_SWRST);
+	at91adc_reg_write(st->reg_base, AT91_ADC_IDR, 0xFFFFFFFF);
+	ret = request_irq(st->irq,
+			  at91adc_eoc_trigger, 0, pdev->dev.driver->name, st);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to allocate IRQ.\n");
+		goto error_unmap_reg;
+	}
+
+	st->clk = clk_get(&pdev->dev, "adc_clk");
+	if (IS_ERR(st->clk)) {
+		dev_err(&pdev->dev, "Failed to get the clock.\n");
+		ret = PTR_ERR(st->clk);
+		goto error_free_irq;
+	}
+
+	clk_enable(st->clk);
+	mstrclk = clk_get_rate(st->clk);
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "No platform data available.\n");
+		ret = -EINVAL;
+		goto error_free_clk;
+	}
+
+	if (!pdata->adc_clock) {
+		dev_err(&pdev->dev, "No ADCClock available.\n");
+		ret = -EINVAL;
+		goto error_free_clk;
+	}
+
+	prsc = (mstrclk / (2 * pdata->adc_clock)) - 1;
+
+	if (!pdata->startup_time) {
+		dev_err(&pdev->dev, "No startup time available.\n");
+		ret = -EINVAL;
+		goto error_free_clk;
+	}
+
+	ticks = round_up((pdata->startup_time * pdata->adc_clock /
+			  1000000) - 1, 8) / 8;
+	at91adc_reg_write(st->reg_base, AT91_ADC_MR,
+			  (AT91_ADC_PRESCAL_(prsc) & AT91_ADC_PRESCAL) |
+			  (AT91_ADC_STARTUP_(ticks) & AT91_ADC_STARTUP));
+
+	/* Setup the ADC channels available on the board */
+	st->nb_chan = pdata->num_channels;
+	ret = at91adc_channel_init(st, pdata);
+	if (ret < 0) {
+		goto error_free_clk;
+	}
+
+	idev->channels = st->channels;
+	idev->num_channels = pdata->num_channels_used;
+
+	init_waitqueue_head(&st->wq_data_avail);
+	mutex_init(&st->lock);
+
+	st->vref_mv = pdata->vref;
+
+	ret = iio_device_register(idev);
+	if (ret < 0) {
+		goto error_free_clk;
+	}
+
+	return 0;
+
+error_free_clk:
+	clk_disable(st->clk);
+	clk_put(st->clk);
+error_free_irq:
+	free_irq(st->irq, st);
+error_unmap_reg:
+	iounmap(st->reg_base);
+error_release_mem:
+	release_mem_region(res->start, resource_size(res));
+error_free_device:
+	iio_free_device(idev);
+error_ret:
+	return ret;
+}
+
+static int __devexit at91adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *idev = platform_get_drvdata(pdev);
+	struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	struct at91adc_state *st = iio_priv(idev);
+
+	iio_device_unregister(idev);
+	free_irq(st->irq, st);
+	iounmap(st->reg_base);
+	release_mem_region(res->start, resource_size(res));
+	iio_free_device(idev);
+
+	return 0;
+}
+
+static struct platform_driver at91adc_driver = {
+	.probe = at91adc_probe,
+	.remove = __devexit_p(at91adc_remove),
+	.driver = {
+		   .name = "at91adc",
+		   },
+};
+
+static int __init at91adc_init(void)
+{
+	return platform_driver_register(&at91adc_driver);
+}
+
+static void __exit at91adc_exit(void)
+{
+	platform_driver_unregister(&at91adc_driver);
+}
+
+module_init(at91adc_init);
+module_exit(at91adc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Atmel AT91 ADC Driver");
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard at free-electrons.com>");
-- 
1.7.4.1




More information about the linux-arm-kernel mailing list