[PATCH 1/5] [orion] Consolidate the address map setup on Orion based platforms.
Andrew Lunn
andrew at lunn.ch
Sat Nov 12 15:00:03 EST 2011
Compile tested on Dove, orion5x, mv78xx0. Boot tested on Kirkwood.
Signed-off-by: Andrew Lunn <andrew at lunn.ch>
---
arch/arm/mach-dove/addr-map.c | 113 +++++++-----------
arch/arm/mach-kirkwood/addr-map.c | 138 ++++++---------------
arch/arm/mach-mv78xx0/addr-map.c | 102 ++++-------------
arch/arm/mach-orion5x/addr-map.c | 146 ++++++++---------------
arch/arm/mach-orion5x/common.c | 7 +-
arch/arm/mach-orion5x/common.h | 2 +-
arch/arm/mach-orion5x/include/mach/orion5x.h | 2 +-
arch/arm/plat-orion/Makefile | 2 +-
arch/arm/plat-orion/addr-map.c | 166 ++++++++++++++++++++++++++
arch/arm/plat-orion/include/plat/addr-map.h | 52 ++++++++
10 files changed, 375 insertions(+), 355 deletions(-)
create mode 100644 arch/arm/plat-orion/addr-map.c
create mode 100644 arch/arm/plat-orion/include/plat/addr-map.h
diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c
index 00be4fc..0d8dee6 100644
--- a/arch/arm/mach-dove/addr-map.c
+++ b/arch/arm/mach-dove/addr-map.c
@@ -14,6 +14,7 @@
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/setup.h>
+#include <plat/addr-map.h>
#include "common.h"
/*
@@ -34,14 +35,6 @@
#define ATTR_PCIE_MEM 0xe8
#define ATTR_SCRATCHPAD 0x0
-/*
- * CPU Address Decode Windows registers
- */
-#define WIN_CTRL(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x0)
-#define WIN_BASE(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x4)
-#define WIN_REMAP_LO(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0x8)
-#define WIN_REMAP_HI(n) (BRIDGE_VIRT_BASE + ((n) << 4) + 0xc)
-
struct mbus_dram_target_info dove_mbus_dram_info;
static inline void __iomem *ddr_map_sc(int i)
@@ -49,78 +42,62 @@ static inline void __iomem *ddr_map_sc(int i)
return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
}
-static int cpu_win_can_remap(int win)
-{
- if (win < 4)
- return 1;
-
- return 0;
-}
-
-static void __init setup_cpu_win(int win, u32 base, u32 size,
- u8 target, u8 attr, int remap)
-{
- u32 ctrl;
-
- base &= 0xffff0000;
- ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-
- writel(base, WIN_BASE(win));
- writel(ctrl, WIN_CTRL(win));
- if (cpu_win_can_remap(win)) {
- if (remap < 0)
- remap = base;
- writel(remap & 0xffff0000, WIN_REMAP_LO(win));
- writel(0, WIN_REMAP_HI(win));
- }
-}
-
-void __init dove_setup_cpu_mbus(void)
-{
- int i;
- int cs;
+/*
+ * Description of the windows needed by the platform code
+ */
+static struct orion_addr_map_cfg addr_map_cfg = {
+ .num_wins = 8,
+ .remappable_wins = 4,
+ .bridge_virt_base = BRIDGE_VIRT_BASE,
+};
+static const struct orion_addr_map_info addr_map_info[] = {
/*
- * First, disable and clear windows.
+ * Windows for PCIe IO+MEM space.
*/
- for (i = 0; i < 8; i++) {
- writel(0, WIN_BASE(i));
- writel(0, WIN_CTRL(i));
- if (cpu_win_can_remap(i)) {
- writel(0, WIN_REMAP_LO(i));
- writel(0, WIN_REMAP_HI(i));
- }
- }
-
+ { 0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
+ TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE
+ },
+ { 1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
+ TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE
+ },
+ { 2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
+ TARGET_PCIE0, ATTR_PCIE_MEM, -1
+ },
+ { 3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
+ TARGET_PCIE1, ATTR_PCIE_MEM, -1
+ },
/*
- * Setup windows for PCIe IO+MEM space.
+ * Window for CESA engine.
*/
- setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
- TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE);
- setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
- TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE);
- setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
- TARGET_PCIE0, ATTR_PCIE_MEM, -1);
- setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
- TARGET_PCIE1, ATTR_PCIE_MEM, -1);
-
+ { 4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
+ TARGET_CESA, ATTR_CESA, -1
+ },
/*
- * Setup window for CESA engine.
+ * Window to the BootROM for Standby and Sleep Resume
*/
- setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
- TARGET_CESA, ATTR_CESA, -1);
-
+ { 5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
+ TARGET_BOOTROM, ATTR_BOOTROM, -1
+ },
/*
- * Setup the Window to the BootROM for Standby and Sleep Resume
+ * Window to the PMU Scratch Pad space
*/
- setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
- TARGET_BOOTROM, ATTR_BOOTROM, -1);
+ { 6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
+ TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1
+ },
+ /* End marker */
+ { -1, 0, 0, 0, 0, 0 }
+};
+
+void __init dove_setup_cpu_mbus(void)
+{
+ int i;
+ int cs;
/*
- * Setup the Window to the PMU Scratch Pad space
+ * Disable, clear and configure windows.
*/
- setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
- TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1);
+ orion_config_wins(&addr_map_cfg, addr_map_info);
/*
* Setup MBUS dram target info.
diff --git a/arch/arm/mach-kirkwood/addr-map.c b/arch/arm/mach-kirkwood/addr-map.c
index 8d03bce..ff8ac07 100644
--- a/arch/arm/mach-kirkwood/addr-map.c
+++ b/arch/arm/mach-kirkwood/addr-map.c
@@ -13,12 +13,12 @@
#include <linux/mbus.h>
#include <linux/io.h>
#include <mach/hardware.h>
+#include <plat/addr-map.h>
#include "common.h"
/*
* Generic Address Decode Windows bit settings
*/
-#define TARGET_DDR 0
#define TARGET_DEV_BUS 1
#define TARGET_SRAM 3
#define TARGET_PCIE 4
@@ -35,119 +35,59 @@
#define ATTR_PCIE1_MEM 0xd8
#define ATTR_SRAM 0x01
-/*
- * Helpers to get DDR bank info
- */
-#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
-#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
+struct mbus_dram_target_info kirkwood_mbus_dram_info;
/*
- * CPU Address Decode Windows registers
+ * Description of the windows needed by the platform code
*/
-#define WIN_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
-#define WIN_CTRL_OFF 0x0000
-#define WIN_BASE_OFF 0x0004
-#define WIN_REMAP_LO_OFF 0x0008
-#define WIN_REMAP_HI_OFF 0x000c
-
-
-struct mbus_dram_target_info kirkwood_mbus_dram_info;
-
-static int __init cpu_win_can_remap(int win)
-{
- if (win < 4)
- return 1;
-
- return 0;
-}
-
-static void __init setup_cpu_win(int win, u32 base, u32 size,
- u8 target, u8 attr, int remap)
-{
- void __iomem *addr = (void __iomem *)WIN_OFF(win);
- u32 ctrl;
-
- base &= 0xffff0000;
- ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-
- writel(base, addr + WIN_BASE_OFF);
- writel(ctrl, addr + WIN_CTRL_OFF);
- if (cpu_win_can_remap(win)) {
- if (remap < 0)
- remap = base;
-
- writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
- writel(0, addr + WIN_REMAP_HI_OFF);
- }
-}
-
-void __init kirkwood_setup_cpu_mbus(void)
-{
- void __iomem *addr;
- int i;
- int cs;
+static struct orion_addr_map_cfg addr_map_cfg = {
+ .num_wins = 8,
+ .remappable_wins = 4,
+ .bridge_virt_base = BRIDGE_VIRT_BASE,
+};
+static const struct orion_addr_map_info addr_map_info[] = {
/*
- * First, disable and clear windows.
+ * Windows for PCIe IO+MEM space.
*/
- for (i = 0; i < 8; i++) {
- addr = (void __iomem *)WIN_OFF(i);
-
- writel(0, addr + WIN_BASE_OFF);
- writel(0, addr + WIN_CTRL_OFF);
- if (cpu_win_can_remap(i)) {
- writel(0, addr + WIN_REMAP_LO_OFF);
- writel(0, addr + WIN_REMAP_HI_OFF);
- }
- }
-
+ { 0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
+ TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE
+ },
+ { 1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
+ TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE
+ },
+ { 2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
+ TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE
+ },
+ { 3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
+ TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE
+ },
/*
- * Setup windows for PCIe IO+MEM space.
+ * Window for NAND controller.
*/
- setup_cpu_win(0, KIRKWOOD_PCIE_IO_PHYS_BASE, KIRKWOOD_PCIE_IO_SIZE,
- TARGET_PCIE, ATTR_PCIE_IO, KIRKWOOD_PCIE_IO_BUS_BASE);
- setup_cpu_win(1, KIRKWOOD_PCIE_MEM_PHYS_BASE, KIRKWOOD_PCIE_MEM_SIZE,
- TARGET_PCIE, ATTR_PCIE_MEM, KIRKWOOD_PCIE_MEM_BUS_BASE);
- setup_cpu_win(2, KIRKWOOD_PCIE1_IO_PHYS_BASE, KIRKWOOD_PCIE1_IO_SIZE,
- TARGET_PCIE, ATTR_PCIE1_IO, KIRKWOOD_PCIE1_IO_BUS_BASE);
- setup_cpu_win(3, KIRKWOOD_PCIE1_MEM_PHYS_BASE, KIRKWOOD_PCIE1_MEM_SIZE,
- TARGET_PCIE, ATTR_PCIE1_MEM, KIRKWOOD_PCIE1_MEM_BUS_BASE);
-
+ { 4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
+ TARGET_DEV_BUS, ATTR_DEV_NAND, -1
+ },
/*
- * Setup window for NAND controller.
+ * Window for SRAM.
*/
- setup_cpu_win(4, KIRKWOOD_NAND_MEM_PHYS_BASE, KIRKWOOD_NAND_MEM_SIZE,
- TARGET_DEV_BUS, ATTR_DEV_NAND, -1);
+ { 5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
+ TARGET_SRAM, ATTR_SRAM, -1
+ },
+ /* End marker */
+ { -1, 0, 0, 0, 0, 0 }
+};
+void __init kirkwood_setup_cpu_mbus(void)
+{
/*
- * Setup window for SRAM.
+ * Disable, clear and configure windows.
*/
- setup_cpu_win(5, KIRKWOOD_SRAM_PHYS_BASE, KIRKWOOD_SRAM_SIZE,
- TARGET_SRAM, ATTR_SRAM, -1);
+ orion_config_wins(&addr_map_cfg, addr_map_info);
/*
* Setup MBUS dram target info.
*/
- kirkwood_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
- addr = (void __iomem *)DDR_WINDOW_CPU_BASE;
-
- for (i = 0, cs = 0; i < 4; i++) {
- u32 base = readl(addr + DDR_BASE_CS_OFF(i));
- u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
-
- /*
- * Chip select enabled?
- */
- if (size & 1) {
- struct mbus_dram_window *w;
-
- w = &kirkwood_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0xf & ~(1 << i);
- w->base = base & 0xffff0000;
- w->size = (size | 0x0000ffff) + 1;
- }
- }
- kirkwood_mbus_dram_info.num_cs = cs;
+ orion_setup_cpu_mbus_target(&addr_map_cfg, &kirkwood_mbus_dram_info,
+ DDR_WINDOW_CPU_BASE);
}
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
index 311d5b0..e65aa82 100644
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -12,12 +12,12 @@
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
+#include <plat/addr-map.h>
#include "common.h"
/*
* Generic Address Decode Windows bit settings
*/
-#define TARGET_DDR 0
#define TARGET_DEV_BUS 1
#define TARGET_PCIE0 4
#define TARGET_PCIE1 8
@@ -32,21 +32,10 @@
#define ATTR_PCIE_MEM(l) (0xf8 & ~(0x10 << (l)))
/*
- * Helpers to get DDR bank info
- */
-#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
-#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
-
-/*
* CPU Address Decode Windows registers
*/
#define WIN0_OFF(n) (BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
#define WIN8_OFF(n) (BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
-#define WIN_CTRL_OFF 0x0000
-#define WIN_BASE_OFF 0x0004
-#define WIN_REMAP_LO_OFF 0x0008
-#define WIN_REMAP_HI_OFF 0x000c
-
struct mbus_dram_target_info mv78xx0_mbus_dram_info;
@@ -63,94 +52,45 @@ static void __init __iomem *win_cfg_base(int win)
return (void __iomem *)((win < 8) ? WIN0_OFF(win) : WIN8_OFF(win));
}
-static int __init cpu_win_can_remap(int win)
-{
- if (win < 8)
- return 1;
-
- return 0;
-}
-
-static void __init setup_cpu_win(int win, u32 base, u32 size,
- u8 target, u8 attr, int remap)
-{
- void __iomem *addr = win_cfg_base(win);
- u32 ctrl;
-
- base &= 0xffff0000;
- ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
-
- writel(base, addr + WIN_BASE_OFF);
- writel(ctrl, addr + WIN_CTRL_OFF);
- if (cpu_win_can_remap(win)) {
- if (remap < 0)
- remap = base;
-
- writel(remap & 0xffff0000, addr + WIN_REMAP_LO_OFF);
- writel(0, addr + WIN_REMAP_HI_OFF);
- }
-}
+/*
+ * Description of the windows needed by the platform code
+ */
+static struct orion_addr_map_cfg addr_map_cfg = {
+ .num_wins = 14,
+ .remappable_wins = 8,
+ .win_cfg_base = win_cfg_base,
+};
void __init mv78xx0_setup_cpu_mbus(void)
{
- void __iomem *addr;
- int i;
- int cs;
-
/*
- * First, disable and clear windows.
+ * Disable, clear and configure windows.
*/
- for (i = 0; i < 14; i++) {
- addr = win_cfg_base(i);
-
- writel(0, addr + WIN_BASE_OFF);
- writel(0, addr + WIN_CTRL_OFF);
- if (cpu_win_can_remap(i)) {
- writel(0, addr + WIN_REMAP_LO_OFF);
- writel(0, addr + WIN_REMAP_HI_OFF);
- }
- }
+ orion_config_wins(&addr_map_cfg, NULL);
/*
* Setup MBUS dram target info.
*/
- mv78xx0_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
if (mv78xx0_core_index() == 0)
- addr = (void __iomem *)DDR_WINDOW_CPU0_BASE;
+ orion_setup_cpu_mbus_target(&addr_map_cfg,
+ &mv78xx0_mbus_dram_info,
+ DDR_WINDOW_CPU0_BASE);
else
- addr = (void __iomem *)DDR_WINDOW_CPU1_BASE;
-
- for (i = 0, cs = 0; i < 4; i++) {
- u32 base = readl(addr + DDR_BASE_CS_OFF(i));
- u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
-
- /*
- * Chip select enabled?
- */
- if (size & 1) {
- struct mbus_dram_window *w;
-
- w = &mv78xx0_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0xf & ~(1 << i);
- w->base = base & 0xffff0000;
- w->size = (size | 0x0000ffff) + 1;
- }
- }
- mv78xx0_mbus_dram_info.num_cs = cs;
+ orion_setup_cpu_mbus_target(&addr_map_cfg,
+ &mv78xx0_mbus_dram_info,
+ DDR_WINDOW_CPU1_BASE);
}
void __init mv78xx0_setup_pcie_io_win(int window, u32 base, u32 size,
int maj, int min)
{
- setup_cpu_win(window, base, size, TARGET_PCIE(maj),
- ATTR_PCIE_IO(min), -1);
+ orion_setup_cpu_win(&addr_map_cfg, window, base, size,
+ TARGET_PCIE(maj), ATTR_PCIE_IO(min), -1);
}
void __init mv78xx0_setup_pcie_mem_win(int window, u32 base, u32 size,
int maj, int min)
{
- setup_cpu_win(window, base, size, TARGET_PCIE(maj),
- ATTR_PCIE_MEM(min), -1);
+ orion_setup_cpu_win(&addr_map_cfg, window, base, size,
+ TARGET_PCIE(maj), ATTR_PCIE_MEM(min), -1);
}
diff --git a/arch/arm/mach-orion5x/addr-map.c b/arch/arm/mach-orion5x/addr-map.c
index 5ceafdc..474268c 100644
--- a/arch/arm/mach-orion5x/addr-map.c
+++ b/arch/arm/mach-orion5x/addr-map.c
@@ -14,8 +14,8 @@
#include <linux/init.h>
#include <linux/mbus.h>
#include <linux/io.h>
-#include <linux/errno.h>
#include <mach/hardware.h>
+#include <plat/addr-map.h>
#include "common.h"
/*
@@ -41,7 +41,6 @@
/*
* Generic Address Decode Windows bit settings
*/
-#define TARGET_DDR 0
#define TARGET_DEV_BUS 1
#define TARGET_PCI 3
#define TARGET_PCIE 4
@@ -57,27 +56,11 @@
#define ATTR_DEV_BOOT 0xf
#define ATTR_SRAM 0x0
-/*
- * Helpers to get DDR bank info
- */
-#define ORION5X_DDR_REG(x) (ORION5X_DDR_VIRT_BASE | (x))
-#define DDR_BASE_CS(n) ORION5X_DDR_REG(0x1500 + ((n) << 3))
-#define DDR_SIZE_CS(n) ORION5X_DDR_REG(0x1504 + ((n) << 3))
-
-/*
- * CPU Address Decode Windows registers
- */
-#define ORION5X_BRIDGE_REG(x) (ORION5X_BRIDGE_VIRT_BASE | (x))
-#define CPU_WIN_CTRL(n) ORION5X_BRIDGE_REG(0x000 | ((n) << 4))
-#define CPU_WIN_BASE(n) ORION5X_BRIDGE_REG(0x004 | ((n) << 4))
-#define CPU_WIN_REMAP_LO(n) ORION5X_BRIDGE_REG(0x008 | ((n) << 4))
-#define CPU_WIN_REMAP_HI(n) ORION5X_BRIDGE_REG(0x00c | ((n) << 4))
-
-
struct mbus_dram_target_info orion5x_mbus_dram_info;
static int __initdata win_alloc_count;
-static int __init orion5x_cpu_win_can_remap(int win)
+static int __init cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
+ const int win)
{
u32 dev, rev;
@@ -91,116 +74,83 @@ static int __init orion5x_cpu_win_can_remap(int win)
return 0;
}
-static int __init setup_cpu_win(int win, u32 base, u32 size,
- u8 target, u8 attr, int remap)
-{
- if (win >= 8) {
- printk(KERN_ERR "setup_cpu_win: trying to allocate "
- "window %d\n", win);
- return -ENOSPC;
- }
-
- writel(base & 0xffff0000, CPU_WIN_BASE(win));
- writel(((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1,
- CPU_WIN_CTRL(win));
-
- if (orion5x_cpu_win_can_remap(win)) {
- if (remap < 0)
- remap = base;
-
- writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win));
- writel(0, CPU_WIN_REMAP_HI(win));
- }
- return 0;
-}
-
-void __init orion5x_setup_cpu_mbus_bridge(void)
-{
- int i;
- int cs;
+/*
+ * Description of the windows needed by the platform code
+ */
+static struct orion_addr_map_cfg addr_map_cfg = {
+ .num_wins = 8,
+ .cpu_win_can_remap = cpu_win_can_remap,
+ .bridge_virt_base = ORION5X_BRIDGE_VIRT_BASE,
+};
+static const struct orion_addr_map_info addr_map_info[] = {
/*
- * First, disable and clear windows.
+ * Setup windows for PCI+PCIe IO+MEM space.
*/
- for (i = 0; i < 8; i++) {
- writel(0, CPU_WIN_BASE(i));
- writel(0, CPU_WIN_CTRL(i));
- if (orion5x_cpu_win_can_remap(i)) {
- writel(0, CPU_WIN_REMAP_LO(i));
- writel(0, CPU_WIN_REMAP_HI(i));
- }
- }
+ { 0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE,
+ TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE
+ },
+ { 1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE,
+ TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE
+ },
+ { 2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE,
+ TARGET_PCIE, ATTR_PCIE_MEM, -1
+ },
+ { 3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
+ TARGET_PCI, ATTR_PCI_MEM, -1
+ },
+ /* End marker */
+ { -1, 0, 0, 0, 0, 0 }
+};
+void __init orion5x_setup_cpu_mbus_bridge(void)
+{
/*
- * Setup windows for PCI+PCIe IO+MEM space.
+ * Disable, clear and configure windows.
*/
- setup_cpu_win(0, ORION5X_PCIE_IO_PHYS_BASE, ORION5X_PCIE_IO_SIZE,
- TARGET_PCIE, ATTR_PCIE_IO, ORION5X_PCIE_IO_BUS_BASE);
- setup_cpu_win(1, ORION5X_PCI_IO_PHYS_BASE, ORION5X_PCI_IO_SIZE,
- TARGET_PCI, ATTR_PCI_IO, ORION5X_PCI_IO_BUS_BASE);
- setup_cpu_win(2, ORION5X_PCIE_MEM_PHYS_BASE, ORION5X_PCIE_MEM_SIZE,
- TARGET_PCIE, ATTR_PCIE_MEM, -1);
- setup_cpu_win(3, ORION5X_PCI_MEM_PHYS_BASE, ORION5X_PCI_MEM_SIZE,
- TARGET_PCI, ATTR_PCI_MEM, -1);
+ orion_config_wins(&addr_map_cfg, addr_map_info);
win_alloc_count = 4;
/*
* Setup MBUS dram target info.
*/
- orion5x_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
-
- for (i = 0, cs = 0; i < 4; i++) {
- u32 base = readl(DDR_BASE_CS(i));
- u32 size = readl(DDR_SIZE_CS(i));
-
- /*
- * Chip select enabled?
- */
- if (size & 1) {
- struct mbus_dram_window *w;
-
- w = &orion5x_mbus_dram_info.cs[cs++];
- w->cs_index = i;
- w->mbus_attr = 0xf & ~(1 << i);
- w->base = base & 0xffff0000;
- w->size = (size | 0x0000ffff) + 1;
- }
- }
- orion5x_mbus_dram_info.num_cs = cs;
+ orion_setup_cpu_mbus_target(&addr_map_cfg, &orion5x_mbus_dram_info,
+ ORION5X_DDR_WINDOW_CPU_BASE);
}
void __init orion5x_setup_dev_boot_win(u32 base, u32 size)
{
- setup_cpu_win(win_alloc_count++, base, size,
- TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
+ orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
+ TARGET_DEV_BUS, ATTR_DEV_BOOT, -1);
}
void __init orion5x_setup_dev0_win(u32 base, u32 size)
{
- setup_cpu_win(win_alloc_count++, base, size,
- TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
+ orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
+ TARGET_DEV_BUS, ATTR_DEV_CS0, -1);
}
void __init orion5x_setup_dev1_win(u32 base, u32 size)
{
- setup_cpu_win(win_alloc_count++, base, size,
- TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
+ orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
+ TARGET_DEV_BUS, ATTR_DEV_CS1, -1);
}
void __init orion5x_setup_dev2_win(u32 base, u32 size)
{
- setup_cpu_win(win_alloc_count++, base, size,
- TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
+ orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
+ TARGET_DEV_BUS, ATTR_DEV_CS2, -1);
}
void __init orion5x_setup_pcie_wa_win(u32 base, u32 size)
{
- setup_cpu_win(win_alloc_count++, base, size,
- TARGET_PCIE, ATTR_PCIE_WA, -1);
+ orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++, base, size,
+ TARGET_PCIE, ATTR_PCIE_WA, -1);
}
-int __init orion5x_setup_sram_win(void)
+void __init orion5x_setup_sram_win(void)
{
- return setup_cpu_win(win_alloc_count++, ORION5X_SRAM_PHYS_BASE,
- ORION5X_SRAM_SIZE, TARGET_SRAM, ATTR_SRAM, -1);
+ orion_setup_cpu_win(&addr_map_cfg, win_alloc_count++,
+ ORION5X_SRAM_PHYS_BASE, ORION5X_SRAM_SIZE,
+ TARGET_SRAM, ATTR_SRAM, -1);
}
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 0ab531d..ecca1e0 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -169,12 +169,7 @@ void __init orion5x_xor_init(void)
****************************************************************************/
static void __init orion5x_crypto_init(void)
{
- int ret;
-
- ret = orion5x_setup_sram_win();
- if (ret)
- return;
-
+ orion5x_setup_sram_win();
orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE,
SZ_8K, IRQ_ORION5X_CESA);
}
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
index 3e5499d..6276ca1 100644
--- a/arch/arm/mach-orion5x/common.h
+++ b/arch/arm/mach-orion5x/common.h
@@ -27,7 +27,7 @@ void orion5x_setup_dev0_win(u32 base, u32 size);
void orion5x_setup_dev1_win(u32 base, u32 size);
void orion5x_setup_dev2_win(u32 base, u32 size);
void orion5x_setup_pcie_wa_win(u32 base, u32 size);
-int orion5x_setup_sram_win(void);
+void orion5x_setup_sram_win(void);
void orion5x_ehci0_init(void);
void orion5x_ehci1_init(void);
diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h
index 0a28bbc..2745f5d 100644
--- a/arch/arm/mach-orion5x/include/mach/orion5x.h
+++ b/arch/arm/mach-orion5x/include/mach/orion5x.h
@@ -69,7 +69,7 @@
******************************************************************************/
#define ORION5X_DDR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x00000)
-
+#define ORION5X_DDR_WINDOW_CPU_BASE (ORION5X_DDR_VIRT_BASE | 0x1500)
#define ORION5X_DEV_BUS_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x10000)
#define ORION5X_DEV_BUS_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x10000)
#define ORION5X_DEV_BUS_REG(x) (ORION5X_DEV_BUS_VIRT_BASE | (x))
diff --git a/arch/arm/plat-orion/Makefile b/arch/arm/plat-orion/Makefile
index 95a5fc5..c20ce0f 100644
--- a/arch/arm/plat-orion/Makefile
+++ b/arch/arm/plat-orion/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel.
#
-obj-y := irq.o pcie.o time.o common.o mpp.o
+obj-y := irq.o pcie.o time.o common.o mpp.o addr-map.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c
new file mode 100644
index 0000000..d3abb34
--- /dev/null
+++ b/arch/arm/plat-orion/addr-map.c
@@ -0,0 +1,166 @@
+/*
+ * arch/arm/plat-orion/addr-map.c
+ *
+ * Address map functions for Marvell Orion based SoCs
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <plat/addr-map.h>
+
+/*
+ * DDR target is the same on all Orion platforms.
+ */
+#define TARGET_DDR 0
+
+/*
+ * Helpers to get DDR bank info
+ */
+#define DDR_BASE_CS_OFF(n) (0x0000 + ((n) << 3))
+#define DDR_SIZE_CS_OFF(n) (0x0004 + ((n) << 3))
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_CTRL_OFF 0x0000
+#define WIN_BASE_OFF 0x0004
+#define WIN_REMAP_LO_OFF 0x0008
+#define WIN_REMAP_HI_OFF 0x000c
+
+/*
+ * Default implementation
+ */
+static void __init __iomem *
+orion_win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
+{
+ return (void __iomem *)(cfg->bridge_virt_base + (win << 4));
+}
+
+/*
+ * Default implementation
+ */
+static int __init orion_cpu_win_can_remap(const struct orion_addr_map_cfg *cfg,
+ const int win)
+{
+ if (win < cfg->remappable_wins)
+ return 1;
+
+ return 0;
+}
+
+void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
+ const int win, const u32 base,
+ const u32 size, const u8 target,
+ const u8 attr, const int remap)
+{
+ void __iomem *addr = cfg->win_cfg_base(cfg, win);
+ u32 ctrl, base_high, remap_addr;
+
+ if (win >= cfg->num_wins) {
+ printk(KERN_ERR "setup_cpu_win: trying to allocate window "
+ "%d when only %d allowed\n", win, cfg->num_wins);
+ }
+
+ base_high = base & 0xffff0000;
+ ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+ writel(base_high, addr + WIN_BASE_OFF);
+ writel(ctrl, addr + WIN_CTRL_OFF);
+ if (cfg->cpu_win_can_remap(cfg, win)) {
+ if (remap < 0)
+ remap_addr = base;
+ else
+ remap_addr = remap;
+ writel(remap_addr & 0xffff0000, addr + WIN_REMAP_LO_OFF);
+ writel(0, addr + WIN_REMAP_HI_OFF);
+ }
+}
+
+/*
+ * Configure a number of windows.
+ */
+static void __init orion_setup_cpu_wins(const struct orion_addr_map_cfg * cfg,
+ const struct orion_addr_map_info *info)
+{
+ while (info->win != -1) {
+ orion_setup_cpu_win(cfg, info->win, info->base, info->size,
+ info->target, info->attr, info->remap);
+ info++;
+ }
+}
+
+static void __init orion_disable_wins(const struct orion_addr_map_cfg * cfg)
+{
+ void __iomem *addr;
+ int i;
+
+ for (i = 0; i < cfg->num_wins; i++) {
+ addr = cfg->win_cfg_base(cfg, i);
+
+ writel(0, addr + WIN_BASE_OFF);
+ writel(0, addr + WIN_CTRL_OFF);
+ if (cfg->cpu_win_can_remap(cfg, i)) {
+ writel(0, addr + WIN_REMAP_LO_OFF);
+ writel(0, addr + WIN_REMAP_HI_OFF);
+ }
+ }
+}
+
+/*
+ * Disable, clear and configure windows.
+ */
+void __init orion_config_wins(struct orion_addr_map_cfg * cfg,
+ const struct orion_addr_map_info *info)
+{
+ if (!cfg->cpu_win_can_remap)
+ cfg->cpu_win_can_remap = orion_cpu_win_can_remap;
+
+ if (!cfg->win_cfg_base)
+ cfg->win_cfg_base = orion_win_cfg_base;
+
+ orion_disable_wins(cfg);
+
+ if (info)
+ orion_setup_cpu_wins(cfg, info);
+}
+
+/*
+ * Setup MBUS dram target info.
+ */
+void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
+ struct mbus_dram_target_info *info,
+ const u32 ddr_window_cpu_base)
+{
+ void __iomem *addr;
+ int i;
+ int cs;
+
+ info->mbus_dram_target_id = TARGET_DDR;
+
+ addr = (void __iomem *)ddr_window_cpu_base;
+
+ for (i = 0, cs = 0; i < 4; i++) {
+ u32 base = readl(addr + DDR_BASE_CS_OFF(i));
+ u32 size = readl(addr + DDR_SIZE_CS_OFF(i));
+
+ /*
+ * Chip select enabled?
+ */
+ if (size & 1) {
+ struct mbus_dram_window *w;
+
+ w = &info->cs[cs++];
+ w->cs_index = i;
+ w->mbus_attr = 0xf & ~(1 << i);
+ w->base = base & 0xffff0000;
+ w->size = (size | 0x0000ffff) + 1;
+ }
+ }
+ info->num_cs = cs;
+}
diff --git a/arch/arm/plat-orion/include/plat/addr-map.h b/arch/arm/plat-orion/include/plat/addr-map.h
new file mode 100644
index 0000000..55e40f4
--- /dev/null
+++ b/arch/arm/plat-orion/include/plat/addr-map.h
@@ -0,0 +1,52 @@
+/*
+ * arch/arm/plat-orion/include/plat/addr-map.h
+ *
+ * Marvell Orion SoC address map handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __PLAT_ADDR_MAP_H
+#define __PLAT_ADDR_MAP_H
+
+struct orion_addr_map_cfg {
+ const int num_wins; /* Total number of windows */
+ const int remappable_wins;
+ const u32 bridge_virt_base;
+
+ /* If NULL, the default cpu_win_can_remap will be used, using
+ the value in remappable_wins */
+ int (*cpu_win_can_remap) (const struct orion_addr_map_cfg *cfg,
+ const int win);
+ /* If NULL, the default win_cfg_base will be used, using the
+ value in bridge_virt_base */
+ void __iomem *(*win_cfg_base) (const struct orion_addr_map_cfg *cfg,
+ const int win);
+};
+
+/*
+ * Information needed to setup one address mapping.
+ */
+struct orion_addr_map_info {
+ const int win;
+ const u32 base;
+ const u32 size;
+ const u8 target;
+ const u8 attr;
+ const int remap;
+};
+
+void __init orion_config_wins(struct orion_addr_map_cfg *cfg,
+ const struct orion_addr_map_info *info);
+
+void __init orion_setup_cpu_win(const struct orion_addr_map_cfg *cfg,
+ const int win, const u32 base,
+ const u32 size, const u8 target,
+ const u8 attr, const int remap);
+
+void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg,
+ struct mbus_dram_target_info *info,
+ const u32 ddr_window_cpu_base);
+#endif
--
1.7.7.1
More information about the linux-arm-kernel
mailing list