[PATCH 3/3] ARM: AT91: Add the ADC to the sam9g20ek board

[Maxime Ripard]

Hi Jonathan,

Thanks for your review, I'm working on it and will submit a new version
asap.

On 04/11/2011 11:33, Jonathan Cameron wrote:
> Please run checkpatch.pl over all patches as it will clean up quite a few
> issues.

Yep, I forgot to run it, my bad.

> Mostly looking good.  At the moment it's simple enough that we can
> rapidly move this one out of staging once the core has gone.

Ok. Rebasing on your outofstaging branch for the next version would be a
good idea ?

Or do you want the driver to still go through the staging step ?

Linus, I guess that if we put the driver directly into the main tree you
are ok with the changes made to boards files (code reviews apart) ?

Thanks,
Maxime

> On 11/03/2011 10:11 AM, Maxime Ripard wrote:
>> Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
>> Cc: Patrice Vilchez <patrice.vilchez at atmel.com>
>> Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
>> ---
>>  arch/arm/mach-at91/at91sam9260_devices.c |   52 ++++++++++++++++++++++++++++++
>>  arch/arm/mach-at91/board-sam9g20ek.c     |   12 +++++++
>>  2 files changed, 64 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
>> index 39f81f4..bfc50ac 100644
>> --- a/arch/arm/mach-at91/at91sam9260_devices.c
>> +++ b/arch/arm/mach-at91/at91sam9260_devices.c
>> @@ -1312,6 +1312,58 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
>>  void __init at91_add_device_cf(struct at91_cf_data * data) {}
>>  #endif
>>  
>> +/* --------------------------------------------------------------------
>> + *  ADCs
>> + * -------------------------------------------------------------------- */
>> +
>> +static struct at91_adc_data adc_data;
>> +
>> +static struct resource adc_resources[] = {
>> +	[0] = {
>> +		.start	= AT91SAM9260_BASE_ADC,
>> +		.end	= AT91SAM9260_BASE_ADC + SZ_16K - 1,
>> +		.flags	= IORESOURCE_MEM,
>> +	},
>> +	[1] = {
>> +		.start	= AT91SAM9260_ID_ADC,
>> +		.end	= AT91SAM9260_ID_ADC,
>> +		.flags	= IORESOURCE_IRQ,
>> +	},
>> +};
>> +
>> +static struct platform_device at91_adc_device = {
>> +	.name		= "at91adc",
>> +	.id		= -1,
>> +	.dev		= {
>> +				.platform_data		= &adc_data,
>> +	},
>> +	.resource	= adc_resources,
>> +	.num_resources	= ARRAY_SIZE(adc_resources),
>> +};
>> +
>> +void __init at91_add_device_adc(struct at91_adc_data *data)
>> +{
>> +	if (!data)
>> +		return;
>> +
>> +	if(data->channels_used[0])
>> +		at91_set_A_periph(AT91_PIN_PC0, 0);
>> +	if(data->channels_used[1])
>> +		at91_set_A_periph(AT91_PIN_PC1, 0);
>> +	if(data->channels_used[2])
>> +		at91_set_A_periph(AT91_PIN_PC2, 0);
>> +	if(data->channels_used[3])
>> +		at91_set_A_periph(AT91_PIN_PC3, 0);
> formatting issues so another one for checkpatch.
> 
> Also define AT91_PIN_PC(n) then make this another
> for_each_bit_set call.  That should get you down from
> 8 lines to about 3.
>> +
>> +	data->adc_clock = 5000000;
>> +	data->num_channels = 4;
>> +	data->startup_time = 10;
>> +
>> +	adc_data = *data;
>> +	platform_device_register(&at91_adc_device);
>> +}
>> +
>> +
>>  /* -------------------------------------------------------------------- */
>>  /*
>>   * These devices are always present and don't need any board-specific
>> diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c
>> index 817f59d..6f2542fb 100644
>> --- a/arch/arm/mach-at91/board-sam9g20ek.c
>> +++ b/arch/arm/mach-at91/board-sam9g20ek.c
>> @@ -314,6 +314,16 @@ static void __init ek_add_device_buttons(void)
>>  static void __init ek_add_device_buttons(void) {}
>>  #endif
>>  
>> +/*
>> + * ADCs
>> + */
>> +
>> +static struct at91_adc_data ek_adc_data = {
>> +	.channels_used = { 1, 1, 1, 1} ,
>> +	.num_channels_used = 4,
>> +	.vref = 3300,
>> +};
>> +
>>  #if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
>>  static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
>>  	REGULATOR_SUPPLY("AVDD", "0-001b"),
>> @@ -389,6 +399,8 @@ static void __init ek_board_init(void)
>>  	ek_add_device_gpio_leds();
>>  	/* Push Buttons */
>>  	ek_add_device_buttons();
>> +	/* ADCs */
>> +	at91_add_device_adc(&ek_adc_data);
>>  	/* PCK0 provides MCLK to the WM8731 */
>>  	at91_set_B_periph(AT91_PIN_PC1, 0);
>>  	/* SSC (for WM8731) */
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


-- 
Maxime Ripard, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com