[PATCH 1/3] ARM: AT91: Add platform data for the ADCs

[Maxime Ripard]

Cc: Nicolas Ferre <nicolas.ferre at atmel.com>
Cc: Patrice Vilchez <patrice.vilchez at atmel.com>
Signed-off-by: Maxime Ripard <maxime.ripard at free-electrons.com>
---
 arch/arm/mach-at91/include/mach/board.h |   22 ++++++++++++++++++++++
 1 files changed, 22 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index ed544a0..b837da8 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -207,4 +207,26 @@ extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
 /* FIXME: this needs a better location, but gets stuff building again */
 extern int at91_suspend_entering_slow_clock(void);
 
+/* ADC */
+#define AT91_ADC_MAX_CHANNELS   16
+
+struct at91_adc_data {
+	/* ADC Clock as specified by the datasheet, in Hz. */
+	unsigned int adc_clock;
+	/*
+	 * Global number of channels available (to specify which channels are
+	 * indeed used on the board, see the channels_used array).
+	 */
+	u8 num_channels;
+	/* Channels in use on the board */
+	u8 channels_used[AT91_ADC_MAX_CHANNELS];
+	/* Number of channels in use */
+	u8 num_channels_used;
+	/* Startup time of the ADC, in microseconds. */
+	u8 startup_time;
+	/* Reference voltage for the ADC in millivolts */
+	unsigned short vref;
+};
+extern void __init at91_add_device_adc(struct at91_adc_data *data);
+
 #endif
-- 
1.7.4.1