[PATCH v7 1/3] ARM: mxs: add saif clkmux functions

Dong Aisheng b29396 at freescale.com
Tue Nov 22 10:54:23 EST 2011


Signed-off-by: Dong Aisheng <b29396 at freescale.com>
Acked-by: Marek Vasut <marek.vasut at gmail.com>
Cc: Sascha Hauer <s.hauer at pengutronix.de>
Cc: Wolfram Sang <w.sang at pengutronix.de>
Cc: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>
Cc: Mark Brown <broonie at opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg at ti.com>

---
changes since v5:
 * remove unneeded parenthesis
changes since v4:
 * remove get_master_id function.
   Instead, we use master_mode and master_id in platform_data to tell
   saif driver the correct master id for each saifs.
changes since v3:
 * remove the unneeded locking according to Sascha
changes since v2:
 * This patch is separated from the following patch based on
   suggestions from Uwe.
   [PATCH 2/3] ARM: mx28evk: add platform data for saif
---
 arch/arm/mach-mxs/clock-mx28.c          |   29 +++++++++++++++++++++++++++++
 arch/arm/mach-mxs/include/mach/common.h |    1 +
 arch/arm/mach-mxs/include/mach/digctl.h |   21 +++++++++++++++++++++
 3 files changed, 51 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mxs/clock-mx28.c b/arch/arm/mach-mxs/clock-mx28.c
index 7954013..c51fe85 100644
--- a/arch/arm/mach-mxs/clock-mx28.c
+++ b/arch/arm/mach-mxs/clock-mx28.c
@@ -22,6 +22,7 @@
 #include <linux/io.h>
 #include <linux/jiffies.h>
 #include <linux/clkdev.h>
+#include <linux/spinlock.h>
 
 #include <asm/clkdev.h>
 #include <asm/div64.h>
@@ -29,6 +30,7 @@
 #include <mach/mx28.h>
 #include <mach/common.h>
 #include <mach/clock.h>
+#include <mach/digctl.h>
 
 #include "regs-clkctrl-mx28.h"
 
@@ -43,6 +45,33 @@ static struct clk emi_clk;
 static struct clk saif0_clk;
 static struct clk saif1_clk;
 static struct clk clk32k_clk;
+static DEFINE_SPINLOCK(clkmux_lock);
+
+/*
+ * HW_SAIF_CLKMUX_SEL:
+ *  DIRECT(0x0): SAIF0 clock pins selected for SAIF0 input clocks, and SAIF1
+ *		clock pins selected for SAIF1 input clocks.
+ *  CROSSINPUT(0x1): SAIF1 clock inputs selected for SAIF0 input clocks, and
+ *		SAIF0 clock inputs selected for SAIF1 input clocks.
+ *  EXTMSTR0(0x2): SAIF0 clock pin selected for both SAIF0 and SAIF1 input
+ *		clocks.
+ *  EXTMSTR1(0x3): SAIF1 clock pin selected for both SAIF0 and SAIF1 input
+ *		clocks.
+ */
+int mxs_saif_clkmux_select(unsigned int clkmux)
+{
+	if (clkmux > 0x3)
+		return -EINVAL;
+
+	spin_lock(&clkmux_lock);
+	__raw_writel(BM_DIGCTL_CTRL_SAIF_CLKMUX,
+			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_CLR_ADDR);
+	__raw_writel(clkmux << BP_DIGCTL_CTRL_SAIF_CLKMUX,
+			DIGCTRL_BASE_ADDR + HW_DIGCTL_CTRL + MXS_SET_ADDR);
+	spin_unlock(&clkmux_lock);
+
+	return 0;
+}
 
 static int _raw_clk_enable(struct clk *clk)
 {
diff --git a/arch/arm/mach-mxs/include/mach/common.h b/arch/arm/mach-mxs/include/mach/common.h
index 635bb5d..3bbb94f 100644
--- a/arch/arm/mach-mxs/include/mach/common.h
+++ b/arch/arm/mach-mxs/include/mach/common.h
@@ -16,6 +16,7 @@ struct clk;
 extern const u32 *mxs_get_ocotp(void);
 extern int mxs_reset_block(void __iomem *);
 extern void mxs_timer_init(struct clk *, int);
+extern int mxs_saif_clkmux_select(unsigned int clkmux);
 
 extern int mx23_register_gpios(void);
 extern int mx23_clocks_init(void);
diff --git a/arch/arm/mach-mxs/include/mach/digctl.h b/arch/arm/mach-mxs/include/mach/digctl.h
new file mode 100644
index 0000000..49a888c
--- /dev/null
+++ b/arch/arm/mach-mxs/include/mach/digctl.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_DIGCTL_H__
+#define __MACH_DIGCTL_H__
+
+/* MXS DIGCTL SAIF CLKMUX */
+#define MXS_DIGCTL_SAIF_CLKMUX_DIRECT		0x0
+#define MXS_DIGCTL_SAIF_CLKMUX_CROSSINPUT	0x1
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0		0x2
+#define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1		0x3
+
+#define HW_DIGCTL_CTRL			0x0
+#define  BP_DIGCTL_CTRL_SAIF_CLKMUX	10
+#define  BM_DIGCTL_CTRL_SAIF_CLKMUX	(0x3 << 10)
+#endif
-- 
1.7.0.4





More information about the linux-arm-kernel mailing list