[PATCH v4 03/10] arm/tegra: prepare clock code for multiple tegra variants
Peter De Schrijver
pdeschrijver at nvidia.com
Fri Nov 11 06:22:09 EST 2011
Rework the tegra20 clock code to support multiple tegra variants :
* remove tegra2_periph_reset_assert/tegra2_periph_reset_deassert. This
functionality should be in clock.c.
* compile tegra_sdmmc_tap_delay only on tegra20 as this feature will not
be available in future variants.
* don't export clk_measure_input_freq as its functionality is also available
using clk_get_rate().
Signed-off-by: Peter De Schrijver <pdeschrijver at nvidia.com>
---
arch/arm/mach-tegra/clock.c | 14 +++++++++-----
arch/arm/mach-tegra/clock.h | 3 ---
arch/arm/mach-tegra/tegra2_clocks.c | 14 +-------------
arch/arm/mach-tegra/timer.c | 12 ++++++++----
4 files changed, 18 insertions(+), 25 deletions(-)
diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c
index f8d41ff..47f6366 100644
--- a/arch/arm/mach-tegra/clock.c
+++ b/arch/arm/mach-tegra/clock.c
@@ -387,13 +387,15 @@ EXPORT_SYMBOL(tegra_clk_init_from_table);
void tegra_periph_reset_deassert(struct clk *c)
{
- tegra2_periph_reset_deassert(c);
+ BUG_ON(!c->ops->reset);
+ c->ops->reset(c, false);
}
EXPORT_SYMBOL(tegra_periph_reset_deassert);
void tegra_periph_reset_assert(struct clk *c)
{
- tegra2_periph_reset_assert(c);
+ BUG_ON(!c->ops->reset);
+ c->ops->reset(c, true);
}
EXPORT_SYMBOL(tegra_periph_reset_assert);
@@ -403,10 +405,11 @@ void __init tegra_init_clock(void)
}
/*
- * The SDMMC controllers have extra bits in the clock source register that
- * adjust the delay between the clock and data to compenstate for delays
- * on the PCB.
+ * The SDMMC controllers on tegra20 have extra bits in the clock source
+ * register that adjust the delay between the clock and data to compenstate
+ * for delays on the PCB.
*/
+#ifdef CONFIG_ARCH_TEGRA_2x_SOC
void tegra_sdmmc_tap_delay(struct clk *c, int delay)
{
unsigned long flags;
@@ -415,6 +418,7 @@ void tegra_sdmmc_tap_delay(struct clk *c, int delay)
tegra2_sdmmc_tap_delay(c, delay);
spin_unlock_irqrestore(&c->spinlock, flags);
}
+#endif
#ifdef CONFIG_DEBUG_FS
diff --git a/arch/arm/mach-tegra/clock.h b/arch/arm/mach-tegra/clock.h
index 688316a..18df129 100644
--- a/arch/arm/mach-tegra/clock.h
+++ b/arch/arm/mach-tegra/clock.h
@@ -146,11 +146,8 @@ struct tegra_clk_init_table {
};
void tegra2_init_clocks(void);
-void tegra2_periph_reset_deassert(struct clk *c);
-void tegra2_periph_reset_assert(struct clk *c);
void clk_init(struct clk *clk);
struct clk *tegra_get_clock_by_name(const char *name);
-unsigned long clk_measure_input_freq(void);
int clk_reparent(struct clk *c, struct clk *parent);
void tegra_clk_init_from_table(struct tegra_clk_init_table *table);
unsigned long clk_get_rate_locked(struct clk *c);
diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c
index 371869d..2ab18f6 100644
--- a/arch/arm/mach-tegra/tegra2_clocks.c
+++ b/arch/arm/mach-tegra/tegra2_clocks.c
@@ -174,7 +174,7 @@ static int tegra_periph_clk_enable_refcount[3 * 32];
#define pmc_readl(reg) \
__raw_readl(reg_pmc_base + (reg))
-unsigned long clk_measure_input_freq(void)
+static unsigned long clk_measure_input_freq(void)
{
u32 clock_autodetect;
clk_writel(OSC_FREQ_DET_TRIG | 1, OSC_FREQ_DET);
@@ -278,18 +278,6 @@ static struct clk_ops tegra_clk_m_ops = {
.disable = tegra2_clk_m_disable,
};
-void tegra2_periph_reset_assert(struct clk *c)
-{
- BUG_ON(!c->ops->reset);
- c->ops->reset(c, true);
-}
-
-void tegra2_periph_reset_deassert(struct clk *c)
-{
- BUG_ON(!c->ops->reset);
- c->ops->reset(c, false);
-}
-
/* super clock functions */
/* "super clocks" on tegra have two-stage muxes and a clock skipping
* super divider. We will ignore the clock skipping divider, since we
diff --git a/arch/arm/mach-tegra/timer.c b/arch/arm/mach-tegra/timer.c
index 2f1df47..6366654 100644
--- a/arch/arm/mach-tegra/timer.c
+++ b/arch/arm/mach-tegra/timer.c
@@ -182,14 +182,18 @@ static struct irqaction tegra_timer_irq = {
static void __init tegra_init_timer(void)
{
struct clk *clk;
- unsigned long rate = clk_measure_input_freq();
+ unsigned long rate;
int ret;
clk = clk_get_sys("timer", NULL);
- if (IS_ERR(clk))
- pr_warn("Unable to get timer clock\n");
- else
+ if (IS_ERR(clk)) {
+ pr_warn("Unable to get timer clock."
+ " Assuming 12Mhz input clock.\n");
+ rate = 12000000;
+ } else {
clk_enable(clk);
+ rate = clk_get_rate(clk);
+ }
/*
* rtc registers are used by read_persistent_clock, keep the rtc clock
--
1.7.7.rc0.72.g4b5ea.dirty
More information about the linux-arm-kernel
mailing list