[PATCH] ARM: S3C64XX: Use software initiated powerdown for Cragganmore

[Mark Brown]

Since the two PMICs are independent we initiate a shutdown on each.

Signed-off-by: Mark Brown <broonie at opensource.wolfsonmicro.com>
---
 arch/arm/mach-s3c64xx/mach-crag6410.c |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c
index b9a052a..3882c2f 100644
--- a/arch/arm/mach-s3c64xx/mach-crag6410.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410.c
@@ -501,6 +501,7 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = {
 	.wm831x_num = 1,
 	.irq_base = BANFF_PMIC_IRQ_BASE,
 	.gpio_base = GPIO_BOARD_START + 8,
+	.soft_shutdown = true,
 
 	.backup = &banff_backup_pdata,
 
@@ -605,6 +606,7 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = {
 	.wm831x_num = 2,
 	.irq_base = GLENFARCLAS_PMIC_IRQ_BASE,
 	.gpio_base = GLENFARCLAS_PMIC_GPIO_BASE,
+	.soft_shutdown = true,
 
 	.gpio_defaults = {
 		/* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */
-- 
1.7.7.1