[PATCH v2 4/4] ARM: pxa168/gplugd: Add support for SD port 1

[Tanmay Upadhyay]

v2 - after sdhci-pxav1 driver is merged with sdhci-pxav2, pass
     pxav1_controller = 1
   - as sdhci device numbering now starts from 1, call
     pxa168_add_sdh accordingly

Signed-off-by: Tanmay Upadhyay <tanmay.upadhyay at einfochips.com>
Reviewed-by: Philip Rakity <prakity at marvell.com>
---
 arch/arm/mach-mmp/gplugd.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c
index 6915656..d7947e7 100644
--- a/arch/arm/mach-mmp/gplugd.c
+++ b/arch/arm/mach-mmp/gplugd.c
@@ -154,6 +154,11 @@ struct pxa168_eth_platform_data gplugd_eth_platform_data = {
 	.init        = gplugd_eth_init,
 };
 
+struct sdhci_pxa_platdata gplugd_sdh_platdata = {
+	.delay_in_ms = 5,
+	.pxav1_controller = 1,
+};
+
 static void __init select_disp_freq(void)
 {
 	/* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */
@@ -186,6 +191,7 @@ static void __init gplugd_init(void)
 	pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info));
 
 	pxa168_add_eth(&gplugd_eth_platform_data);
+	pxa168_add_sdh(1, &gplugd_sdh_platdata);
 }
 
 MACHINE_START(GPLUGD, "PXA168-based GuruPlug Display (gplugD) Platform")
-- 
1.7.0.4