-next fails to boot as of today on S3C6410

[Mark Brown]

On Wed, Nov 23, 2011 at 01:32:37PM +0000, Jamie Iles wrote:
> On Wed, Nov 23, 2011 at 01:01:35PM +0000, Mark Brown wrote:

> > I tried adding some yesterday around the VIC registration in the CPU
> > code but it didn't actually appear on the console so I'm none the wiser.

> OK.  You mentioned you had trouble reverting the patch yesterday - I've 
> pushed a branch (git://github.com/jamieiles/linux-2.6-ji.git 
> vic-dt-revert-next) which is today's next with all of the VIC patches 
> reverted if you want to try that to be sure.  I've built s3c6400_defconfig 
> successfully, but can't test it unless there's a qemu model somewhere?

It wasn't the mechanics of reverting that caused problems, it was the
fact that when I reverted things still didn't work.  Actually, I've gone
back and retested with the for-next branch from today and it appears
that for some reason the issue has gone away there which is a bit
confusing though as I write this it occurs to me that I did turn device
tree back on (my board doesn't use it but I typically build it in) which
I had off when I tested yesterday and would explain the issue.

It looks like there's a second bug breaking the boot in there - testing
your commit the board boots but if I test the tip of Russell's for-next
then that breaks again.  I'm just starting another bisect and
considering sending a patch to add a git finger-point alias.