[RFC PATCH 29/34] msm: clock: Expand CLK_MIN, CLK_MAX and CLK_MINMAX macros
David Brown
davidb at codeaurora.org
Wed Nov 2 14:36:26 EDT 2011
From: Matt Wagantall <mattw at codeaurora.org>
These were just defined to be the same as CLKFLAG_MIN,
CLKFLAG_MAX and (CLKFLAG_MIN | CLKFLAG_MAX). Expand them
to avoid the unnecessary level of redirection.
Signed-off-by: Matt Wagantall <mattw at codeaurora.org>
Signed-off-by: David Brown <davidb at codeaurora.org>
---
arch/arm/mach-msm/clock-7x30.c | 4 ++--
arch/arm/mach-msm/clock-debug.c | 6 +++---
arch/arm/mach-msm/clock-pcom-lookup.c | 10 +++++-----
arch/arm/mach-msm/clock.h | 7 ++-----
arch/arm/mach-msm/devices-msm7x00.c | 2 +-
arch/arm/mach-msm/devices-qsd8x50.c | 12 +++++++-----
6 files changed, 20 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-msm/clock-7x30.c b/arch/arm/mach-msm/clock-7x30.c
index ce0e73c..d917942 100644
--- a/arch/arm/mach-msm/clock-7x30.c
+++ b/arch/arm/mach-msm/clock-7x30.c
@@ -2265,11 +2265,11 @@ static struct branch_clk lpa_core_clk = {
static DEFINE_CLK_PCOM(adsp_clk, ADSP_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(codec_ssbi_clk, CODEC_SSBI_CLK, CLKFLAG_SKIP_AUTO_OFF);
-static DEFINE_CLK_PCOM(ebi1_clk, EBI1_CLK, CLK_MIN);
+static DEFINE_CLK_PCOM(ebi1_clk, EBI1_CLK, CLKFLAG_SKIP_AUTO_OFF | CLKFLAG_MIN);
static DEFINE_CLK_PCOM(ecodec_clk, ECODEC_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(gp_clk, GP_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(uart3_clk, UART3_CLK, 0);
-static DEFINE_CLK_PCOM(usb_phy_clk, USB_PHY_CLK, CLK_MIN);
+static DEFINE_CLK_PCOM(usb_phy_clk, USB_PHY_CLK, CLKFLAG_MIN);
static DEFINE_CLK_PCOM(p_grp_2d_clk, GRP_2D_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(p_grp_2d_p_clk, GRP_2D_P_CLK, CLKFLAG_SKIP_AUTO_OFF);
diff --git a/arch/arm/mach-msm/clock-debug.c b/arch/arm/mach-msm/clock-debug.c
index 1a08a9a..d5d4091 100644
--- a/arch/arm/mach-msm/clock-debug.c
+++ b/arch/arm/mach-msm/clock-debug.c
@@ -28,15 +28,15 @@ static int clock_debug_rate_set(void *data, u64 val)
/* Only increases to max rate will succeed, but that's actually good
* for debugging purposes so we don't check for error. */
- if (clock->flags & CLK_MAX)
+ if (clock->flags & CLKFLAG_MAX)
clk_set_max_rate(clock, val);
- if (clock->flags & CLK_MIN)
+ if (clock->flags & CLKFLAG_MIN)
ret = clk_set_min_rate(clock, val);
else
ret = clk_set_rate(clock, val);
if (ret != 0)
printk(KERN_ERR "clk_set%s_rate failed (%d)\n",
- (clock->flags & CLK_MIN) ? "_min" : "", ret);
+ (clock->flags & CLKFLAG_MIN) ? "_min" : "", ret);
return ret;
}
diff --git a/arch/arm/mach-msm/clock-pcom-lookup.c b/arch/arm/mach-msm/clock-pcom-lookup.c
index 22f8145..9d83cba 100644
--- a/arch/arm/mach-msm/clock-pcom-lookup.c
+++ b/arch/arm/mach-msm/clock-pcom-lookup.c
@@ -66,10 +66,10 @@ static struct pcom_clk dsi_pixel_clk = {
static DEFINE_CLK_PCOM(dsi_ref_clk, DSI_REF_CLK, 0);
static DEFINE_CLK_PCOM(ebi1_clk, EBI1_CLK,
- CLKFLAG_SKIP_AUTO_OFF | CLK_MIN);
+ CLKFLAG_SKIP_AUTO_OFF | CLKFLAG_MIN);
static DEFINE_CLK_PCOM(ebi2_clk, EBI2_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(ecodec_clk, ECODEC_CLK, CLKFLAG_SKIP_AUTO_OFF);
-static DEFINE_CLK_PCOM(emdh_clk, EMDH_CLK, CLK_MINMAX);
+static DEFINE_CLK_PCOM(emdh_clk, EMDH_CLK, CLKFLAG_MIN | CLKFLAG_MAX);
static DEFINE_CLK_PCOM(gp_clk, GP_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(grp_2d_clk, GRP_2D_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(grp_2d_p_clk, GRP_2D_P_CLK, CLKFLAG_SKIP_AUTO_OFF);
@@ -95,9 +95,9 @@ static DEFINE_CLK_PCOM(mdp_lcdc_pclk_clk, MDP_LCDC_PCLK_CLK,
static DEFINE_CLK_PCOM(mdp_vsync_clk, MDP_VSYNC_CLK, 0);
static DEFINE_CLK_PCOM(mdp_dsi_p_clk, MDP_DSI_P_CLK, 0);
static DEFINE_CLK_PCOM(pbus_clk, PBUS_CLK,
- CLKFLAG_SKIP_AUTO_OFF | CLK_MIN);
+ CLKFLAG_SKIP_AUTO_OFF | CLKFLAG_MIN);
static DEFINE_CLK_PCOM(pcm_clk, PCM_CLK, CLKFLAG_SKIP_AUTO_OFF);
-static DEFINE_CLK_PCOM(pmdh_clk, PMDH_CLK, CLK_MINMAX);
+static DEFINE_CLK_PCOM(pmdh_clk, PMDH_CLK, CLKFLAG_MIN | CLKFLAG_MAX);
static DEFINE_CLK_PCOM(sdac_clk, SDAC_CLK, 0);
static DEFINE_CLK_PCOM(sdc1_clk, SDC1_CLK, 0);
static DEFINE_CLK_PCOM(sdc1_p_clk, SDC1_P_CLK, 0);
@@ -127,7 +127,7 @@ static DEFINE_CLK_PCOM(usb_hs_core_clk, USB_HS_CORE_CLK, 0);
static DEFINE_CLK_PCOM(usb_hs_p_clk, USB_HS_P_CLK, 0);
static DEFINE_CLK_PCOM(usb_otg_clk, USB_OTG_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(usb_phy_clk, USB_PHY_CLK, CLKFLAG_SKIP_AUTO_OFF);
-static DEFINE_CLK_PCOM(vdc_clk, VDC_CLK, CLK_MIN);
+static DEFINE_CLK_PCOM(vdc_clk, VDC_CLK, CLKFLAG_MIN);
static DEFINE_CLK_PCOM(vfe_axi_clk, VFE_AXI_CLK, 0);
static DEFINE_CLK_PCOM(vfe_clk, VFE_CLK, 0);
static DEFINE_CLK_PCOM(vfe_mdc_clk, VFE_MDC_CLK, 0);
diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h
index 09afadd..a873a19 100644
--- a/arch/arm/mach-msm/clock.h
+++ b/arch/arm/mach-msm/clock.h
@@ -68,11 +68,8 @@ struct clk {
.children = LIST_HEAD_INIT((name).children), \
.siblings = LIST_HEAD_INIT((name).siblings)
-#define CLK_MIN CLKFLAG_MIN
-#define CLK_MAX CLKFLAG_MAX
-#define CLK_MINMAX (CLK_MIN | CLK_MAX)
-
-#if defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || defined(CONFIG_ARCH_MSM8960)
+#if defined(CONFIG_ARCH_MSM7X30) || defined(CONFIG_ARCH_MSM8X60) || \
+defined(CONFIG_ARCH_MSM8960)
void __init msm_clk_soc_init(void);
#else
static inline void __init msm_clk_soc_init(void) { }
diff --git a/arch/arm/mach-msm/devices-msm7x00.c b/arch/arm/mach-msm/devices-msm7x00.c
index a7764bd..b4658e2 100644
--- a/arch/arm/mach-msm/devices-msm7x00.c
+++ b/arch/arm/mach-msm/devices-msm7x00.c
@@ -410,7 +410,7 @@ static DEFINE_CLK_PCOM(mdc_clk, MDC_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(mdp_clk, MDP_CLK, 0);
static DEFINE_CLK_PCOM(pbus_clk, PBUS_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(pcm_clk, PCM_CLK, CLKFLAG_SKIP_AUTO_OFF);
-static DEFINE_CLK_PCOM(pmdh_clk, PMDH_CLK, CLK_MINMAX);
+static DEFINE_CLK_PCOM(pmdh_clk, PMDH_CLK, CLKFLAG_MIN | CLKFLAG_MAX);
static DEFINE_CLK_PCOM(sdac_clk, SDAC_CLK, 0);
static DEFINE_CLK_PCOM(sdc1_clk, SDC1_CLK, 0);
static DEFINE_CLK_PCOM(sdc1_p_clk, SDC1_P_CLK, 0);
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
index f4e65f0..ab15e69 100644
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -294,10 +294,11 @@ int __init msm_add_sdcc(unsigned int controller,
static DEFINE_CLK_PCOM(adm_clk, ADM_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(ce_clk, CE_CLK, CLKFLAG_SKIP_AUTO_OFF);
-static DEFINE_CLK_PCOM(ebi1_clk, EBI1_CLK, CLK_MIN);
+static DEFINE_CLK_PCOM(ebi1_clk, EBI1_CLK, CLKFLAG_MIN);
static DEFINE_CLK_PCOM(ebi2_clk, EBI2_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(ecodec_clk, ECODEC_CLK, CLKFLAG_SKIP_AUTO_OFF);
-static DEFINE_CLK_PCOM(emdh_clk, EMDH_CLK, CLK_MINMAX);
+static DEFINE_CLK_PCOM(emdh_clk, EMDH_CLK, CLKFLAG_MIN |
+ CLKFLAG_MAX);
static DEFINE_CLK_PCOM(gp_clk, GP_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(grp_3d_clk, GRP_3D_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(i2c_clk, I2C_CLK, CLKFLAG_SKIP_AUTO_OFF);
@@ -305,14 +306,15 @@ static DEFINE_CLK_PCOM(icodec_rx_clk, ICODEC_RX_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(icodec_tx_clk, ICODEC_TX_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(imem_clk, IMEM_CLK, 0);
static DEFINE_CLK_PCOM(mdc_clk, MDC_CLK, CLKFLAG_SKIP_AUTO_OFF);
-static DEFINE_CLK_PCOM(pmdh_clk, PMDH_CLK, CLK_MINMAX);
+static DEFINE_CLK_PCOM(pmdh_clk, PMDH_CLK, CLKFLAG_MIN |
+ CLKFLAG_MAX);
static DEFINE_CLK_PCOM(mdp_clk, MDP_CLK, 0);
static DEFINE_CLK_PCOM(mdp_lcdc_pclk_clk, MDP_LCDC_PCLK_CLK,
CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(mdp_lcdc_pad_pclk_clk, MDP_LCDC_PAD_PCLK_CLK,
CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(mdp_vsync_clk, MDP_VSYNC_CLK, CLKFLAG_SKIP_AUTO_OFF);
-static DEFINE_CLK_PCOM(pbus_clk, PBUS_CLK, CLK_MIN);
+static DEFINE_CLK_PCOM(pbus_clk, PBUS_CLK, CLKFLAG_MIN);
static DEFINE_CLK_PCOM(pcm_clk, PCM_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(sdac_clk, SDAC_CLK, 0);
static DEFINE_CLK_PCOM(sdc1_clk, SDC1_CLK, 0);
@@ -336,7 +338,7 @@ static DEFINE_CLK_PCOM(uart2dm_clk, UART2DM_CLK, CLKFLAG_SKIP_AUTO_OFF);
static DEFINE_CLK_PCOM(usb_hs_clk, USB_HS_CLK, 0);
static DEFINE_CLK_PCOM(usb_hs_p_clk, USB_HS_P_CLK, 0);
static DEFINE_CLK_PCOM(usb_otg_clk, USB_OTG_CLK, CLKFLAG_SKIP_AUTO_OFF);
-static DEFINE_CLK_PCOM(vdc_clk, VDC_CLK, CLK_MIN);
+static DEFINE_CLK_PCOM(vdc_clk, VDC_CLK, CLKFLAG_MIN);
static DEFINE_CLK_PCOM(vfe_clk, VFE_CLK, 0);
static DEFINE_CLK_PCOM(vfe_mdc_clk, VFE_MDC_CLK, 0);
static DEFINE_CLK_PCOM(vfe_axi_clk, VFE_AXI_CLK, 0);
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
More information about the linux-arm-kernel
mailing list