[PATCH v3] ARM: gic: allow GIC to support non-banked setups

[Rob Herring]

On 11/15/2011 08:16 AM, Marc Zyngier wrote:
> Hi Rob,
> 
> On 15/11/11 13:37, Rob Herring wrote:
>> Marc,
>>
>> On 11/15/2011 06:17 AM, Marc Zyngier wrote:
>>> The GIC support code is heavily using the fact that hardware
>>> implementations are exposing banked registers. Unfortunately, it
>>> looks like at least one GIC implementation (EXYNOS) offers both
>>> the distributor and the CPU interfaces at different addresses,
>>> depending on the CPU.
>>>
>>> This problem is solved by allowing the distributor and CPU interface
>>> addresses to be per-cpu variables for the platforms that require it.
>>> The EXYNOS code is updated not to mess with the GIC internals while
>>> handling interrupts, and struct gic_chip_data is back to being private.
>>> The DT binding for the gic is updated to allow an optional "cpu-offset"
>>> value, which is used to compute the various base addresses.
>>>
>>> Finally, a new config option (GIC_NON_BANKED) is used to control this
>>> feature, so the overhead is only present on kernels compiled with
>>> support for EXYNOS.
>>>
>>> Tested on Origen (EXYNOS4) and Panda (OMAP4).
>>>
>>> Cc: Kukjin Kim <kgene.kim at samsung.com>
>>> Cc: Rob Herring <robherring2 at gmail.com>
>>> Cc: Will Deacon <will.deacon at arm.com>
>>> Cc: Thomas Abraham <thomas.abraham at linaro.org>
>>> Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
>>> ---
>>> This is a minor update on the previous version, simply adding a
>>> config option so that normal platforms don't have to pay the
>>> price of the get_base() indirection.
>>>
>>> Any comment is welcome, specially on the DT binding update.
>>>
>>>  Documentation/devicetree/bindings/arm/gic.txt |    4 +
>>>  arch/arm/common/Kconfig                       |    3 +
>>>  arch/arm/common/gic.c                         |  133 +++++++++++++++++++++----
>>>  arch/arm/include/asm/hardware/gic.h           |   24 ++---
>>>  arch/arm/mach-exynos/cpu.c                    |   16 +---
>>>  arch/arm/mach-exynos/platsmp.c                |   28 +-----
>>>  arch/arm/plat-s5p/Kconfig                     |    1 +
>>>  7 files changed, 132 insertions(+), 77 deletions(-)
>>>
>>> @@ -664,9 +756,12 @@ int __init gic_of_init(struct device_node *node, struct device_node *parent)
>>>       cpu_base = of_iomap(node, 1);
>>>       WARN(!cpu_base, "unable to map gic cpu registers\n");
>>>
>>> +     if (of_property_read_u32(node, "cpu-offset", &percpu_offset))
>>> +             percpu_offset = 0;
>>> +
>>
>> What are the chances of not having a simple offset you can index into?
> 
> Very slim, I think. It would make the hardware insane. Oh wait... ;-)
> 
>> If you add a new property, then you need to add documentation.
> 
> I think I added two lines to gic.txt (see first hunk of the patch).
> 

Ah. Sorry, missed that.

>> You need to ioremap the secondary addresses. For that reason, adding to
>> the regs property may be simpler.
> 
> My idea was to have two big regions (one for the CPU interface, one for
> the distributor interface), encompassing the need of all CPUs. In the
> Samsung case, it's 64kB per region (only the cpu offset changes between
> 2 and 4 core versions).

Evidently my brain is not working today... It should be fine.

So you can add my ack:

Acked-by: Rob Herring <rob.herring at calxeda.com>

Rob