[PATCH v2 0/2] ARM: Samsung: Add basic device tree support for Exynos4 boards
Kukjin Kim
kgene.kim at samsung.com
Wed Nov 2 08:45:06 EDT 2011
Thomas Abraham wrote:
>
> Changes since v1:
> - Removed unique per-controller compatible string value from gpio
controller
> nodes
> to align with the updated device tree support for exynos4 gpio
controller.
> - Removed the interrupt combiner controller node.
>
> This patchset adds a new basic device tree enabled machine/board file
which is
> based on the Samsung's Exynos4 family of SoC's. Also included in this
patchset
> is the
> dts file for Exynos4210 SoC, Samsung's SMDKV310 board and Insignal's
Origen
> board.
>
> The Exynos4210 dts file includes support for IRQ, GPIO, WDT, RTC, UART,
SDHCI,
> Keypad,
> DMA and I2C controllers. As device tree coverage for Exynos4210 increases,
> additional
> device nodes to represent the controllers should be added.
>
> The device tree enabled machine file enables boot on two boards based on
the
> Exynos4210 SoC. This provides a starting point to add additional device
tree
> support
> on these boards, migrate other existing Exynos4 based boards to use device
tree
> and enable device tree based boot on new upcoming boards.
>
> This patchset has been tested on the following tree:
> git://git.linaro.org/git/people/arnd/arm-soc.git branch: for-next
>
> Thomas Abraham (2):
> ARM: Samsung: Add Exynos4 device tree enabled board file
> ARM: dts: Add intial dts file for Exynos4210 SoC, SMDKV310 and Origen
board
>
> .../devicetree/bindings/arm/insignal-boards.txt | 8 +
> .../devicetree/bindings/arm/samsung-boards.txt | 8 +
> arch/arm/boot/dts/exynos4210-origen.dts | 137 +++++++
> arch/arm/boot/dts/exynos4210-smdkv310.dts | 182 +++++++++
> arch/arm/boot/dts/exynos4210.dtsi | 397
> ++++++++++++++++++++
> arch/arm/mach-exynos4/Kconfig | 14 +
> arch/arm/mach-exynos4/Makefile | 2 +
> arch/arm/mach-exynos4/mach-exynos4-dt.c | 85 +++++
> 8 files changed, 833 insertions(+), 0 deletions(-)
> create mode 100644
Documentation/devicetree/bindings/arm/insignal-boards.txt
> create mode 100644
Documentation/devicetree/bindings/arm/samsung-boards.txt
> create mode 100644 arch/arm/boot/dts/exynos4210-origen.dts
> create mode 100644 arch/arm/boot/dts/exynos4210-smdkv310.dts
> create mode 100644 arch/arm/boot/dts/exynos4210.dtsi
> create mode 100644 arch/arm/mach-exynos4/mach-exynos4-dt.c
OK. replaced with this in next-samsung-dt branch.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim at samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
More information about the linux-arm-kernel
mailing list