[PATCH v2 0/2] OMAP2+: DMA: fix src/dst position reporting

[Peter Ujfalusi]

Hello,

Changes since v1:
- Move the check after the ERRATA_3_3 re-read test

If the user asks for the sDMA current position before the first
data has been transmitted (before the first DMA request has been
generated), the reported position is not valid:
src position: CSAC is uninitialized
dst position: CDAC is 0

The return values in both case considered invalid.
This sitation can be identified by checking if the CDAC register
is 0 (it is initialized to 0 in omap_dam_start call).
In this case return the programmed source/destination address.

The affected omap_get_dma_src_pos/omap_get_dma_dst_pos functions
are used by the audio stack mainly for checking the current position
of the audio stream.

Regards,
Peter
---
Peter Ujfalusi (2):
  OMAP2+: DMA: Workaround for invalid source position
  OMAP2+: DMA: Workaround for invalid destination position

 arch/arm/plat-omap/dma.c |   22 +++++++++++++++++++++-
 1 files changed, 21 insertions(+), 1 deletions(-)

-- 
1.7.7.2