2.6.38 port not booting on i.MX53 SoM

[Wayne Tams]

On Tue, Nov 29, 2011 at 11:12 AM, Fabio Estevam <festevam at gmail.com> wrote:
> 2011/11/29 Wayne Tams <wayne.tams at gmail.com>:
>
>> I have followed your instructions and double checked serial bootargs
>> by loading the 2.6.35 kernel; 2.6.35 loads ok displaying printks as it
>> executes.
>>
>> However using the new 2.6.38 kernel, there are not any additional
>> messages after enabling the debug settings you mentioned.
>
> As Uwe explained this list is about mainline kernel.
>
> I have a suggestion for you though: if you use FSL 2.6.38 you should
> update your FSL U-boot also because there were some UART clock changes
> from 2.6.35 to 2.6.38. Or use the mainline kernel instead ;-)
>
> Regards,
>
> Fabio Estevam

Understood, thanks for the help all the same. :)

Wayne