[PATCH 3/3] ARM: omap: pass minimal SoC/board data for UART from dt

Rob Herring robherring2 at gmail.com
Wed Nov 16 20:04:27 EST 2011


On 11/16/2011 05:02 AM, Rajendra Nayak wrote:
> Pass minimal data needed for console boot, from dt, for
> OMAP4 panda/sdp and OMAP3 beagle boards, and get rid of the
> static initialization from generic board file.
> 
> Signed-off-by: Rajendra Nayak <rnayak at ti.com>
> ---
>  arch/arm/boot/dts/omap3-beagle.dts  |   17 +++++++++++++++++
>  arch/arm/boot/dts/omap3.dtsi        |   27 +++++++++++++++++++++++++++
>  arch/arm/boot/dts/omap4-panda.dts   |   17 +++++++++++++++++
>  arch/arm/boot/dts/omap4-sdp.dts     |   17 +++++++++++++++++
>  arch/arm/boot/dts/omap4.dtsi        |   24 ++++++++++++++++++++++++
>  arch/arm/mach-omap2/board-generic.c |    1 -
>  6 files changed, 102 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
> index 9486be6..4c8f11e 100644
> --- a/arch/arm/boot/dts/omap3-beagle.dts
> +++ b/arch/arm/boot/dts/omap3-beagle.dts
> @@ -27,3 +27,20 @@
>  		reg = <0x80000000 0x20000000>; /* 512 MB */
>  	};
>  };
> +
> +&uart1 {
> +	clock-frequency = <48000000>;
> +};
> +
> +&uart2 {
> +	clock-frequency = <48000000>;
> +};
> +
> +&uart3 {
> +	ti,console_hwmod;
> +	clock-frequency = <48000000>;
> +};
> +
> +&uart4 {
> +	clock-frequency = <48000000>;
> +};
> diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
> index d202bb5..ea591c5 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -13,6 +13,13 @@
>  / {
>  	compatible = "ti,omap3430", "ti,omap3";
>  
> +	aliases {
> +		uart1 = &uart1;
> +		uart2 = &uart2;
> +		uart3 = &uart3;
> +		uart4 = &uart4;
> +	};
> +
>  	cpus {
>  		cpu at 0 {
>  			compatible = "arm,cortex-a8";
> @@ -59,5 +66,25 @@
>  			interrupt-controller;
>  			#interrupt-cells = <1>;
>  		};
> +
> +		uart1: uart at 1 {

Use the generic name serial and the address: uart1: serial at 1234abcd

> +			compatible = "ti,omap-uart";
> +			ti,hwmods = "uart1";
> +		};
> +
> +		uart2: uart at 2 {
> +			compatible = "ti,omap-uart";
> +			ti,hwmods = "uart2";
> +		};
> +
> +		uart3: uart at 3 {
> +			compatible = "ti,omap-uart";
> +			ti,hwmods = "uart3";
> +		};
> +
> +		uart4: uart at 4 {
> +			compatible = "ti,omap-uart";
> +			ti,hwmods = "uart4";
> +		};
>  	};
>  };
> diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
> index c702657..aa65449 100644
> --- a/arch/arm/boot/dts/omap4-panda.dts
> +++ b/arch/arm/boot/dts/omap4-panda.dts
> @@ -27,3 +27,20 @@
>  		reg = <0x80000000 0x40000000>; /* 1 GB */
>  	};
>  };
> +
> +&uart1 {
> +	clock-frequency = <48000000>;
> +};
> +
> +&uart2 {
> +	clock-frequency = <48000000>;
> +};
> +
> +&uart3 {
> +	ti,console_hwmod;
> +	clock-frequency = <48000000>;
> +};
> +
> +&uart4 {
> +	clock-frequency = <48000000>;
> +};
> diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
> index 066e28c..524f5bf 100644
> --- a/arch/arm/boot/dts/omap4-sdp.dts
> +++ b/arch/arm/boot/dts/omap4-sdp.dts
> @@ -27,3 +27,20 @@
>  		reg = <0x80000000 0x40000000>; /* 1 GB */
>  	};
>  };
> +
> +&uart1 {
> +	clock-frequency = <48000000>;
> +};
> +
> +&uart2 {
> +	clock-frequency = <48000000>;
> +};
> +
> +&uart3 {
> +	ti,console_hwmod;
> +	clock-frequency = <48000000>;
> +};
> +
> +&uart4 {
> +	clock-frequency = <48000000>;

It doesn't seem that this frequency ever varies and is likely to be
replaced with clock bindings, so maybe just put it in the dtsi files.

Rob




More information about the linux-arm-kernel mailing list