[PATCH v5 4/7] arm: omap4: hwmod: introduce emu hwmod
Cousson, Benoit
b-cousson at ti.com
Fri Nov 18 07:58:20 EST 2011
Hi Ming Lei,
Sorry, for the delay, it took me some time to gather the exhaustive data for that block.
On 11/10/2011 10:02 AM, Paul Walmsley wrote:
> Hello Ming Lei,
>
> just a few quick comments for now -
>
> On Wed, 9 Nov 2011, Ming Lei wrote:
>
>> On Tue, Nov 8, 2011 at 11:26 PM, Paul Walmsley<paul at pwsan.com> wrote:
>>
>>>> +static struct omap_hwmod_irq_info omap44xx_emu_irqs[] = {
>>>> + { .name = "cti0", .irq = 1 + OMAP44XX_IRQ_GIC_START },
>>>> + { .name = "cti1", .irq = 2 + OMAP44XX_IRQ_GIC_START },
>>>> + { .irq = -1 }
>>>> +};
>>>
>>> Are you sure these are part of the emulation IP? We already have those
>>
>> I am not sure, I just figure out one way to make omap4 pmu work. Since there
>> are few descriptions in TRM about it, it is a hacking based on [1], :-)
>>
>>> IRQs in the MPU hwmod, see omap44xx_mpu_irqs[] in the same file.
>>
>> I just see it, but looks like the "mpu" hwmod isn't populated as omap_device,
>> so the CTI irqs aren't requested now.
>
> Okay. Maybe you can probably add some code in mach-omap2/devices.c to
> build an omap_device for this for right now? I am not 100% sure whether
> those cti0/1 interrupts should be associated with the MPU or with the
> DEBUGSS but Benoît might be able to answer this.
>
>> Also, current arm perf code don't handle three IRQs(one pl310 irq and
>> two CTI irq) inside one device correctly.
>
> To fix this, that ARM perf code should either be using
> platform_get_irq_byname(), or the hwmod hardware data will need to be
> rearranged to meet the arbitrary ordering requirement. I'd suggest
> pinging Will on this issue to see what he wants to do.
>
>> So any suggestion about CTI IRQs connecting to which hwmod, so that they can
>> be found by pmu driver?
>>
>>>> +/*emu hwmod*/
>>>> +static struct omap_hwmod omap44xx_emu_hwmod = {
>>>> + .name = "emu",
>>>> + .class =&omap44xx_emu_hwmod_class,
>>>> + .clkdm_name = "emu_sys_clkdm",
>>>> + .prcm = {
>>>> + .omap4 = {
>>>> + .clkctrl_offs = OMAP4_CM_EMU_CLKSTCTRL_OFFSET,
>>>
>>> This doesn't look right either: EMU is a clockdomain, not an IP block.
>>
>> I defined the 'emu' hwmod to control the clock state transition of the EMU
>> clock domain by writing to CLKTRCTRL.CM_EMU_CLKSTCTRL with standard
>> hwmod interface(_enable / _idle). Is there any other neat way to do it?
>
> So the clockdomain is already defined in
> mach-omap2/clockdomains44xx_data.c and there's code to control it - see
> for example clkdm_enable_idle(). But this code should not be called
> directly by any device driver code or driver integration code. The thing
> to do here is to ask Benoît to release the hwmod data for the DEBUGSS
> hwmod, then someone will need to write an MFD driver for that which
> exposes the PMU address space to the PMU platform driver.
Following that discussion, here is the patch to expose debugss hwmod.
I have moved the CTIs irq from MPU to debugss and exposed all the internals IP that are part of the OMAP debug subsystem.
Since the DEBUGSS cannot be accessed at boot time if the l3_main_3 and the l3_instr interconnects are not enable, you will have some warnings.
[ 0.416992] omap_hwmod: debugss: softreset failed (waited 10000 usec)
[ 0.426727] omap_hwmod: debugss: _wait_target_disable failed
Just let me know if you have any issue with that patch.
Please note that will will need the fix "ARM: OMAP: hwmod: Fix the addr space, irq, dma count APIs" to avoid hwmod core messing up with the resources.
I've just posted a pull request for Tony to get it for -rc3.
http://comments.gmane.org/gmane.linux.ports.arm.kernel/140458
I pushed these two patches on a branch based on mainline for your convenience.
git://gitorious.org/omap-pm/linux.git wip-emu/debuss_hwmod
Regards,
Benoit
---
From: Benoit Cousson <b-cousson at ti.com>
Date: Fri, 18 Nov 2011 11:42:12 +0100
Subject: [PATCH] ARM: OMAP4: hwmod data: Add support for the debug modules
The OMAP4 DEBUG subsystem contains all the IPs used for emulation,
included the ones from the CortexA9 MPU.
Expose the individual modules base address.
Re-map the CTIs IRQs from MPU to DEBUGSS.
Signed-off-by: Benoit Cousson <b-cousson at ti.com>
Cc: Ming Lei <ming.lei at canonical.com>
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 177 +++++++++++++++++++++++++++-
1 files changed, 174 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 7695e5d..6cf21ee 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -47,6 +47,7 @@
/* Backward references (IPs with Bus Master capability) */
static struct omap_hwmod omap44xx_aess_hwmod;
+static struct omap_hwmod omap44xx_debugss_hwmod;
static struct omap_hwmod omap44xx_dma_system_hwmod;
static struct omap_hwmod omap44xx_dmm_hwmod;
static struct omap_hwmod omap44xx_dsp_hwmod;
@@ -337,6 +338,14 @@ static struct omap_hwmod omap44xx_l3_main_1_hwmod = {
};
/* l3_main_2 */
+/* debugss -> l3_main_2 */
+static struct omap_hwmod_ocp_if omap44xx_debugss__l3_main_2 = {
+ .master = &omap44xx_debugss_hwmod,
+ .slave = &omap44xx_l3_main_2_hwmod,
+ .clk = "dbgclk_mux_ck",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* dma_system -> l3_main_2 */
static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = {
.master = &omap44xx_dma_system_hwmod,
@@ -686,7 +695,6 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = {
* ctrl_module_pad_core
* ctrl_module_pad_wkup
* ctrl_module_wkup
- * debugss
* efuse_ctrl_cust
* efuse_ctrl_std
* elm
@@ -908,6 +916,168 @@ static struct omap_hwmod omap44xx_counter_32k_hwmod = {
};
/*
+ * 'debugss' class
+ * debug and emulation sub system
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_debugss_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_debugss_hwmod_class = {
+ .name = "debugss",
+ .sysc = &omap44xx_debugss_sysc,
+};
+
+/* debugss */
+static struct omap_hwmod_irq_info omap44xx_debugss_irqs[] = {
+ { .name = "cti0", .irq = 1 + OMAP44XX_IRQ_GIC_START },
+ { .name = "cti1", .irq = 2 + OMAP44XX_IRQ_GIC_START },
+ { .irq = -1 }
+};
+
+/* debugss master ports */
+static struct omap_hwmod_ocp_if *omap44xx_debugss_masters[] = {
+ &omap44xx_debugss__l3_main_2,
+};
+
+static struct omap_hwmod_addr_space omap44xx_debugss_addrs[] = {
+ {
+ .name = "mipi_stm_add_sp_0",
+ .pa_start = 0x54000000,
+ .pa_end = 0x540fffff,
+ },
+ {
+ .name = "mipi_stm_add_sp_1",
+ .pa_start = 0x54100000,
+ .pa_end = 0x5413ffff,
+ },
+ {
+ .name = "mpu_c0_debug",
+ .pa_start = 0x54140000,
+ .pa_end = 0x54141fff,
+ },
+ {
+ .name = "mpu_c1_debug",
+ .pa_start = 0x54142000,
+ .pa_end = 0x54143fff,
+ },
+ {
+ .name = "cti0_mpu",
+ .pa_start = 0x54148000,
+ .pa_end = 0x54148fff,
+ },
+ {
+ .name = "cti1_mpu",
+ .pa_start = 0x54149000,
+ .pa_end = 0x54149fff,
+ },
+ {
+ .name = "ptm0_mpu",
+ .pa_start = 0x5414c000,
+ .pa_end = 0x5414cfff,
+ },
+ {
+ .name = "ptm1_mpu",
+ .pa_start = 0x5414d000,
+ .pa_end = 0x5414dfff,
+ },
+ {
+ .name = "tf_mpu",
+ .pa_start = 0x54158000,
+ .pa_end = 0x54158fff,
+ },
+ {
+ .name = "dap_pc_mpu",
+ .pa_start = 0x54159000,
+ .pa_end = 0x54159fff,
+ },
+ {
+ .name = "apb_bridge_a_ctrl_time_out",
+ .pa_start = 0x5415f000,
+ .pa_end = 0x5415ffff,
+ },
+ {
+ .name = "drm",
+ .pa_start = 0x54160000,
+ .pa_end = 0x54160fff,
+ },
+ {
+ .name = "mipi_stm",
+ .pa_start = 0x54161000,
+ .pa_end = 0x54161fff,
+ .flags = ADDR_TYPE_RT
+ },
+ {
+ .name = "csetb",
+ .pa_start = 0x54162000,
+ .pa_end = 0x54162fff,
+ },
+ {
+ .name = "cstpiu",
+ .pa_start = 0x54163000,
+ .pa_end = 0x54163fff,
+ },
+ {
+ .name = "cstf1",
+ .pa_start = 0x54164000,
+ .pa_end = 0x54164fff,
+ },
+ {
+ .name = "cstf2",
+ .pa_start = 0x54165000,
+ .pa_end = 0x54165fff,
+ },
+ {
+ .name = "l4_cfg_emu_conf_regs",
+ .pa_start = 0x54167000,
+ .pa_end = 0x54167fff,
+ },
+ {
+ .name = "l3_instr_emu_conf_regs",
+ .pa_start = 0x54180000,
+ .pa_end = 0x54180fff,
+ },
+ { }
+};
+
+/* l3_instr -> debugss */
+static struct omap_hwmod_ocp_if omap44xx_l3_instr__debugss = {
+ .master = &omap44xx_l3_instr_hwmod,
+ .slave = &omap44xx_debugss_hwmod,
+ .clk = "l3_div_ck",
+ .addr = omap44xx_debugss_addrs,
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* debugss slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_debugss_slaves[] = {
+ &omap44xx_l3_instr__debugss,
+};
+
+static struct omap_hwmod omap44xx_debugss_hwmod = {
+ .name = "debugss",
+ .class = &omap44xx_debugss_hwmod_class,
+ .clkdm_name = "emu_sys_clkdm",
+ .mpu_irqs = omap44xx_debugss_irqs,
+ .main_clk = "trace_clk_div_ck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP4_CM_EMU_DEBUGSS_CLKCTRL_OFFSET,
+ .context_offs = OMAP4_RM_EMU_DEBUGSS_CONTEXT_OFFSET,
+ },
+ },
+ .slaves = omap44xx_debugss_slaves,
+ .slaves_cnt = ARRAY_SIZE(omap44xx_debugss_slaves),
+ .masters = omap44xx_debugss_masters,
+ .masters_cnt = ARRAY_SIZE(omap44xx_debugss_masters),
+};
+
+/*
* 'dma' class
* dma controller for data exchange between memory to memory (i.e. internal or
* external memory) and gp peripherals to memory or memory to gp peripherals
@@ -3902,8 +4072,6 @@ static struct omap_hwmod_class omap44xx_mpu_hwmod_class = {
/* mpu */
static struct omap_hwmod_irq_info omap44xx_mpu_irqs[] = {
{ .name = "pl310", .irq = 0 + OMAP44XX_IRQ_GIC_START },
- { .name = "cti0", .irq = 1 + OMAP44XX_IRQ_GIC_START },
- { .name = "cti1", .irq = 2 + OMAP44XX_IRQ_GIC_START },
{ .irq = -1 }
};
@@ -5308,6 +5476,9 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
/* counter class */
/* &omap44xx_counter_32k_hwmod, */
+ /* debugss class */
+ &omap44xx_debugss_hwmod,
+
/* dma class */
&omap44xx_dma_system_hwmod,
--
1.7.0.4
More information about the linux-arm-kernel
mailing list