[PATCH] arm/tegra: convert tegra20 to GIC devicetree binding

[Rob Herring]

On 11/17/2011 09:07 AM, Peter De Schrijver wrote:
> Convert tegra20 IRQ intialization to the GIC devicetree binding. Modify the
> interrupt definitions in the dts files according to
> Documentation/devicetree/bindings/arm/gic.txt
> 
> Signed-off-by: Peter De Schrijver <pdeschrijver at nvidia.com>

One minor comment below, but otherwise:

Acked-by: Rob Herring <rob.herring at calxeda.com>

> ---
>  arch/arm/boot/dts/tegra-paz00.dts |    2 +-
>  arch/arm/boot/dts/tegra20.dtsi    |   52 ++++++++++++++++++------------------
>  arch/arm/mach-tegra/irq.c         |   18 +++++++++++-
>  3 files changed, 43 insertions(+), 29 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
> index 15a949f..7ff8f6f 100644
> --- a/arch/arm/boot/dts/tegra-paz00.dts
> +++ b/arch/arm/boot/dts/tegra-paz00.dts
> @@ -32,7 +32,7 @@
>  		#size-cells = <0>;
>  		compatible = "nvidia,nvec";
>  		reg = <0x7000C500 0x100>;
> -		interrupts = <124>;
> +		interrupts = <0 92 0x04>;
>  		clock-frequency = <80000>;
>  		request-gpios = <&gpio 170 0>;
>  		slave-addr = <138>;
> diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
> index 795b921..cd01b01 100644
> --- a/arch/arm/boot/dts/tegra20.dtsi
> +++ b/arch/arm/boot/dts/tegra20.dtsi
> @@ -5,9 +5,9 @@
>  	interrupt-parent = <&intc>;
>  
>  	intc: interrupt-controller at 50041000 {
> -		compatible = "nvidia,tegra20-gic";
> +		compatible = "arm,cortex-a9-gic";
>  		interrupt-controller;

You should add an "interrupt-parent;" here so the gic's parent is null
and not the gic.

Rob
> -		#interrupt-cells = <1>;
> +		#interrupt-cells = <3>;
>  		reg = < 0x50041000 0x1000 >,
>  		      < 0x50040100 0x0100 >;
>  	};