[PATCH 1/3] ARM: pxa: Add DT support to pxa2xx-uart

[Marek Vasut]

Add device tree binding for PXA2xx UARTs. Tested on Vpac270 board.

Signed-off-by: Marek Vasut <marek.vasut at gmail.com>
Cc: Arnd Bergmann <arnd at arndb.de>
Cc: Grant Likely <grant.likely at secretlab.ca>
---
 drivers/tty/serial/pxa.c |   50 +++++++++++++++++++++++++++++++++++++++++++--
 1 files changed, 47 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index 531931c..836cbb4 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -43,6 +43,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 struct uart_pxa_port {
 	struct uart_port        port;
@@ -761,11 +763,50 @@ static const struct dev_pm_ops serial_pxa_pm_ops = {
 };
 #endif
 
+#ifdef CONFIG_OF
+static struct of_device_id serial_pxa_dt_ids[] = {
+	{ .compatible = "marvell,pxa2xx-uart" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids);
+
+static int serial_pxa_probe_dt(struct platform_device *pdev, int *portid)
+{
+	struct device_node *np = pdev->dev.of_node;
+	static int portnum;
+
+	if (!np)
+		return -ENODEV;
+
+	/* PXA has up to four UART ports */
+	*portid = portnum++;
+	if (*portid >= 4)
+		return -ENODEV;
+
+	/* Check if we're probing compatible ports only! */
+	if (of_get_property(np, "marvell,pxa250", NULL))
+		if (!cpu_is_pxa25x())
+			return -EINVAL;
+
+	return 0;
+}
+#else
+static inline int serial_pxa_probe_dt(struct platform_device *pdev, int *portid)
+{
+	return 0;
+}
+#endif
+
 static int serial_pxa_probe(struct platform_device *dev)
 {
 	struct uart_pxa_port *sport;
 	struct resource *mmres, *irqres;
 	int ret;
+	int portid = dev->id;
+
+	ret = serial_pxa_probe_dt(dev, &portid);
+	if (ret == -EINVAL)
+		return 0;
 
 	mmres = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	irqres = platform_get_resource(dev, IORESOURCE_IRQ, 0);
@@ -788,12 +829,12 @@ static int serial_pxa_probe(struct platform_device *dev)
 	sport->port.irq = irqres->start;
 	sport->port.fifosize = 64;
 	sport->port.ops = &serial_pxa_pops;
-	sport->port.line = dev->id;
+	sport->port.line = portid;
 	sport->port.dev = &dev->dev;
 	sport->port.flags = UPF_IOREMAP | UPF_BOOT_AUTOCONF;
 	sport->port.uartclk = clk_get_rate(sport->clk);
 
-	switch (dev->id) {
+	switch (portid) {
 	case 0: sport->name = "FFUART"; break;
 	case 1: sport->name = "BTUART"; break;
 	case 2: sport->name = "STUART"; break;
@@ -809,7 +850,7 @@ static int serial_pxa_probe(struct platform_device *dev)
 		goto err_clk;
 	}
 
-	serial_pxa_ports[dev->id] = sport;
+	serial_pxa_ports[portid] = sport;
 
 	uart_add_one_port(&serial_pxa_reg, &sport->port);
 	platform_set_drvdata(dev, sport);
@@ -846,6 +887,9 @@ static struct platform_driver serial_pxa_driver = {
 #ifdef CONFIG_PM
 		.pm	= &serial_pxa_pm_ops,
 #endif
+#ifdef CONFIG_OF
+		.of_match_table = serial_pxa_dt_ids,
+#endif
 	},
 };
 
-- 
1.7.6.3