[PATCH v3 16/17] ARM: omap2plus: convert to CONFIG_MULTI_IRQ_HANDLER
Marc Zyngier
marc.zyngier at arm.com
Fri Nov 4 12:57:50 EDT 2011
Convert the omap2plus platforms to be using CONFIG_MULTI_IRQ_HANDLER.
Each machine is modified to provide either omap2_intc_handle_irq(),
omap3_intc_handle_irq() or gic_handle_irq().
This allows for a major cleanup, removing the MULTI_OMAP setup
from the interrupt path.
Tested on both Panda and IGEPv2 (single kernel image)
Tested-by: Tony Lindgren <tony at atomide.com>
Signed-off-by: Marc Zyngier <marc.zyngier at arm.com>
---
arch/arm/mach-omap2/Kconfig | 1 +
arch/arm/mach-omap2/board-2430sdp.c | 1 +
arch/arm/mach-omap2/board-3430sdp.c | 1 +
arch/arm/mach-omap2/board-3630sdp.c | 1 +
arch/arm/mach-omap2/board-4430sdp.c | 2 +
arch/arm/mach-omap2/board-am3517crane.c | 1 +
arch/arm/mach-omap2/board-am3517evm.c | 1 +
arch/arm/mach-omap2/board-apollon.c | 1 +
arch/arm/mach-omap2/board-cm-t35.c | 2 +
arch/arm/mach-omap2/board-cm-t3517.c | 1 +
arch/arm/mach-omap2/board-devkit8000.c | 1 +
arch/arm/mach-omap2/board-generic.c | 1 +
arch/arm/mach-omap2/board-h4.c | 1 +
arch/arm/mach-omap2/board-igep0020.c | 2 +
arch/arm/mach-omap2/board-ldp.c | 1 +
arch/arm/mach-omap2/board-n8x0.c | 3 +
arch/arm/mach-omap2/board-omap3beagle.c | 1 +
arch/arm/mach-omap2/board-omap3evm.c | 1 +
arch/arm/mach-omap2/board-omap3logic.c | 2 +
arch/arm/mach-omap2/board-omap3pandora.c | 1 +
arch/arm/mach-omap2/board-omap3stalker.c | 1 +
arch/arm/mach-omap2/board-omap3touchbook.c | 1 +
arch/arm/mach-omap2/board-omap4panda.c | 2 +
arch/arm/mach-omap2/board-overo.c | 1 +
arch/arm/mach-omap2/board-rm680.c | 1 +
arch/arm/mach-omap2/board-rx51.c | 1 +
arch/arm/mach-omap2/board-zoom.c | 2 +
arch/arm/mach-omap2/include/mach/entry-macro.S | 137 ------------------------
arch/arm/plat-omap/Kconfig | 1 +
29 files changed, 36 insertions(+), 137 deletions(-)
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 5034147..9a6d818 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -25,6 +25,7 @@ config ARCH_OMAP2
depends on ARCH_OMAP2PLUS
default y
select CPU_V6
+ select MULTI_IRQ_HANDLER
config ARCH_OMAP3
bool "TI OMAP3"
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index d704f0a..d33821b 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -301,6 +301,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
.map_io = omap243x_map_io,
.init_early = omap2430_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_2430sdp_init,
.timer = &omap2_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 77142c1..1c17bd8 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -728,6 +728,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_3430sdp_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
index f552305..b27aa85 100644
--- a/arch/arm/mach-omap2/board-3630sdp.c
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -215,6 +215,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_sdp_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 9db9ddb..1d21d3f 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -28,6 +28,7 @@
#include <mach/hardware.h>
#include <mach/omap4-common.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -985,6 +986,7 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = gic_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = omap_4430sdp_init,
.timer = &omap4_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c
index 7834536..0166f4e 100644
--- a/arch/arm/mach-omap2/board-am3517crane.c
+++ b/arch/arm/mach-omap2/board-am3517crane.c
@@ -98,6 +98,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD")
.map_io = omap3_map_io,
.init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = am3517_crane_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
index d314f03..18cf2ce 100644
--- a/arch/arm/mach-omap2/board-am3517evm.c
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -491,6 +491,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
.map_io = omap3_map_io,
.init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = am3517_evm_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index de8134b..cf4f2c5 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -354,6 +354,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_apollon_init,
.timer = &omap2_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index bd1bcac..21a2436 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -634,6 +634,7 @@ MACHINE_START(CM_T35, "Compulab CM-T35")
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t35_init,
.timer = &omap3_timer,
MACHINE_END
@@ -644,6 +645,7 @@ MACHINE_START(CM_T3730, "Compulab CM-T3730")
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3730_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c
index 3f4dc66..1e2c52b 100644
--- a/arch/arm/mach-omap2/board-cm-t3517.c
+++ b/arch/arm/mach-omap2/board-cm-t3517.c
@@ -299,6 +299,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517")
.map_io = omap3_map_io,
.init_early = am35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = cm_t3517_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 4291894..31dda68 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -661,6 +661,7 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000")
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = devkit8000_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 06941d1..67b821f 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -112,6 +112,7 @@ DT_MACHINE_START(OMAP243X_DT, "Generic OMAP2430 (Flattened Device Tree)")
.map_io = omap243x_map_io,
.init_early = omap2430_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_generic_init,
.timer = &omap2_timer,
.dt_compat = omap243x_boards_compat,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index c12666e..58a029f 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -380,6 +380,7 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = omap_h4_init,
.timer = &omap2_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index d0a3f78..b45d48d 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -672,6 +672,7 @@ MACHINE_START(IGEP0020, "IGEP v2 board")
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
MACHINE_END
@@ -682,6 +683,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module")
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = igep_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index e179da0..72b2d86 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -434,6 +434,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board")
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_ldp_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index e9d5f4a..fa04052 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -689,6 +689,7 @@ MACHINE_START(NOKIA_N800, "Nokia N800")
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
MACHINE_END
@@ -699,6 +700,7 @@ MACHINE_START(NOKIA_N810, "Nokia N810")
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
MACHINE_END
@@ -709,6 +711,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
.map_io = omap242x_map_io,
.init_early = omap2420_init_early,
.init_irq = omap2_init_irq,
+ .handle_irq = omap2_intc_handle_irq,
.init_machine = n8x0_init_machine,
.timer = &omap2_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 4a71cb7..b77fd3b 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -559,6 +559,7 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
.map_io = omap3_map_io,
.init_early = omap3_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_beagle_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index ec00b2e..f86c1e8 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -681,6 +681,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM")
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_evm_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index 7c0f193..bd65196 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -208,6 +208,7 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board")
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
MACHINE_END
@@ -217,6 +218,7 @@ MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board")
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3logic_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index f7811f4..caf607c 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -606,6 +606,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3pandora_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index ddb7d66..4328ec8 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -454,6 +454,7 @@ MACHINE_START(SBC3530, "OMAP3 STALKER")
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_stalker_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index a2d0d19..2b7bc4e 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -381,6 +381,7 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap3_touchbook_init,
.timer = &omap3_secure_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 42a42da..828efcb 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -31,6 +31,7 @@
#include <mach/hardware.h>
#include <mach/omap4-common.h>
+#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -578,6 +579,7 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board")
.map_io = omap4_map_io,
.init_early = omap4430_init_early,
.init_irq = gic_init_irq,
+ .handle_irq = gic_handle_irq,
.init_machine = omap4_panda_init,
.timer = &omap4_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 4cf7aea..9865d8d 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -562,6 +562,7 @@ MACHINE_START(OVERO, "Gumstix Overo")
.map_io = omap3_map_io,
.init_early = omap35xx_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = overo_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 616fb39..e0f5fd5 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -149,6 +149,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board")
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = rm680_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 4af7c4b..5e52af5 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -127,6 +127,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = rx51_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
index be6684d..011b2e3 100644
--- a/arch/arm/mach-omap2/board-zoom.c
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -135,6 +135,7 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
MACHINE_END
@@ -145,6 +146,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
+ .handle_irq = omap3_intc_handle_irq,
.init_machine = omap_zoom_init,
.timer = &omap3_timer,
MACHINE_END
diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index feb90a1..56964a0 100644
--- a/arch/arm/mach-omap2/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -10,146 +10,9 @@
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <mach/irqs.h>
-#include <asm/hardware/gic.h>
-
-#include <plat/omap24xx.h>
-#include <plat/omap34xx.h>
-#include <plat/omap44xx.h>
-
-#include <plat/multi.h>
-
-#define OMAP2_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
-#define OMAP3_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
-#define OMAP4_IRQ_BASE OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
-#define INTCPS_SIR_IRQ_OFFSET 0x0040 /* omap2/3 active interrupt offset */
-#define ACTIVEIRQ_MASK 0x7f /* omap2/3 active interrupt bits */
.macro disable_fiq
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
-/*
- * Unoptimized irq functions for multi-omap2, 3 and 4
- */
-
-#ifdef MULTI_OMAP2
- /*
- * Configure the interrupt base on the first interrupt.
- * See also omap_irq_base_init for setting omap_irq_base.
- */
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =omap_irq_base @ irq base address
- ldr \base, [\base, #0] @ irq base value
- .endm
-
- /* Check the pending interrupts. Note that base already set */
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- tst \base, #0x100 @ gic address?
- bne 4401f @ found gic
-
- /* Handle omap2 and omap3 */
- ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
- cmp \irqnr, #0x0
- bne 9998f
- ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
- cmp \irqnr, #0x0
- bne 9998f
- ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
- cmp \irqnr, #0x0
- bne 9998f
-
- /*
- * ti816x has additional IRQ pending register. Checking this
- * register on omap2 & omap3 has no effect (read as 0).
- */
- ldr \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
- cmp \irqnr, #0x0
-9998:
- ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
- and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
- b 9999f
-
- /* Handle omap4 */
-4401: ldr \irqstat, [\base, #GIC_CPU_INTACK]
- ldr \tmp, =1021
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #15
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
-9999:
- .endm
-
-#ifdef CONFIG_SMP
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt
- * on the controller, since this requires the original irqstat
- * value which we won't easily be able to recreate later.
- */
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- it cc
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- it cs
- cmpcs \irqnr, \irqnr
- .endm
-#endif /* CONFIG_SMP */
-
-#else /* MULTI_OMAP2 */
-
-
-/*
- * Optimized irq functions for omap2, 3 and 4
- */
-
-#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
- .macro get_irqnr_preamble, base, tmp
-#ifdef CONFIG_ARCH_OMAP2
- ldr \base, =OMAP2_IRQ_BASE
-#else
- ldr \base, =OMAP3_IRQ_BASE
-#endif
- .endm
-
- /* Check the pending interrupts. Note that base already set */
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqnr, [\base, #0x98] /* IRQ pending reg 1 */
- cmp \irqnr, #0x0
- bne 9999f
- ldr \irqnr, [\base, #0xb8] /* IRQ pending reg 2 */
- cmp \irqnr, #0x0
- bne 9999f
- ldr \irqnr, [\base, #0xd8] /* IRQ pending reg 3 */
- cmp \irqnr, #0x0
-#ifdef CONFIG_SOC_OMAPTI816X
- bne 9999f
- ldr \irqnr, [\base, #0xf8] /* IRQ pending reg 4 */
- cmp \irqnr, #0x0
-#endif
-9999:
- ldrne \irqnr, [\base, #INTCPS_SIR_IRQ_OFFSET]
- and \irqnr, \irqnr, #ACTIVEIRQ_MASK /* Clear spurious bits */
-
- .endm
-#endif
-
-
-#ifdef CONFIG_ARCH_OMAP4
-#define HAVE_GET_IRQNR_PREAMBLE
-#include <asm/hardware/entry-macro-gic.S>
-
- .macro get_irqnr_preamble, base, tmp
- ldr \base, =OMAP4_IRQ_BASE
- .endm
-
-#endif
-
-#endif /* MULTI_OMAP2 */
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index aa59f42..4a1cc58 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -24,6 +24,7 @@ config ARCH_OMAP2PLUS
select CLKDEV_LOOKUP
select GENERIC_IRQ_CHIP
select OMAP_DM_TIMER
+ select MULTI_IRQ_HANDLER
help
"Systems based on OMAP2, OMAP3 or OMAP4"
--
1.7.0.4
More information about the linux-arm-kernel
mailing list