[REPOST PATCH 1/2 v4] OMAP2+: hwmod: Add API to enable IO ring wakeup.

Shubhrajyoti shubhrajyoti at ti.com
Mon Nov 14 07:54:29 EST 2011


On Monday 14 November 2011 05:14 PM, Shubhrajyoti wrote:
> On Monday 04 July 2011 10:25 AM, Govindraj.R wrote:
>> Add API to enable IO pad wakeup capability based on mux dynamic pad and
>> wake_up enable flag available from hwmod_mux initialization.
>>
>> Use the wakeup_enable flag and enable wakeup capability
>> for the given pads. Wakeup capability will be enabled/disabled
>> during hwmod idle transition based on whether wakeup_flag is
>> set or cleared.
>>
>> Map the enable/disable pad wakeup API's to hwmod_wakeup_enable/disable.
>>
>> Signed-off-by: Govindraj.R <govindraj.raja at ti.com>
>> ---
>>  arch/arm/mach-omap2/omap_hwmod.c |   59 ++++++++++++++++++++++++++++++++++++++
>>  1 files changed, 59 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
>> index 293fa6c..3b28e0a 100644
>> --- a/arch/arm/mach-omap2/omap_hwmod.c
>> +++ b/arch/arm/mach-omap2/omap_hwmod.c
>> @@ -1770,6 +1770,34 @@ static int __init omap_hwmod_setup_all(void)
>>  core_initcall(omap_hwmod_setup_all);
>>  
>>  /**
>> + * omap_hwmod_set_ioring_wakeup - enable io pad wakeup flag.
>> + * @oh: struct omap_hwmod *
>> + * @set: bool value indicating to set or clear wakeup status.
>> + *
>> + * Set or Clear wakeup flag for the io_pad.
>> + */
>> +static int omap_hwmod_set_ioring_wakeup(struct omap_hwmod *oh, bool set_wake)
>> +{
>> +	struct omap_device_pad *pad;
>> +	int ret = -EINVAL, j;
>> +
>> +	if (oh->mux && oh->mux->enabled) {
>> +		for (j = 0; j < oh->mux->nr_pads_dynamic; j++) {
>> +			pad = oh->mux->pads_dynamic[j];
>> +			if (pad->flags & OMAP_DEVICE_PAD_WAKEUP) {
>> +				if (set_wake)
>> +					pad->idle |= OMAP_WAKEUP_EN;
>> +				else
>> +					pad->idle &= ~OMAP_WAKEUP_EN;
> Will this not erase the other bits ?
> Should we read and erase only the wakeup  bits.
> Am I missing something ?
My bad please ignore
>> +				ret = 0;
>> +			}
>> +		}
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +/**
>>   * omap_hwmod_enable - enable an omap_hwmod
>>   * @oh: struct omap_hwmod *
>>   *
>> @@ -2097,6 +2125,35 @@ int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
>>  {
>>  	return _del_initiator_dep(oh, init_oh);
>>  }
>> +/**
>> + * omap_hwmod_enable_ioring_wakeup - Set wakeup flag for iopad.
>> + * @oh: struct omap_hwmod *
>> + *
>> + * Traverse through dynamic pads, if pad is enabled then
>> + * set wakeup enable bit flag for the mux pin. Wakeup pad bit
>> + * will be set during hwmod idle transistion.
>> + * Return error if pads are not enabled or not available.
>> + */
>> +int omap_hwmod_enable_ioring_wakeup(struct omap_hwmod *oh)
>> +{
>> +	/* Enable pad wake-up capability */
>> +	return omap_hwmod_set_ioring_wakeup(oh, true);
>> +}
>> +
>> +/**
>> + * omap_hwmod_disable_ioring_wakeup - Clear wakeup flag for iopad.
>> + * @oh: struct omap_hwmod *
>> + *
>> + * Traverse through dynamic pads, if pad is enabled then
>> + * clear wakeup enable bit flag for the mux pin. Wakeup pad bit
>> + * will be set during hwmod idle transistion.
>> + * Return error if pads are not enabled or not available.
>> + */
>> +int omap_hwmod_disable_ioring_wakeup(struct omap_hwmod *oh)
>> +{
>> +	/* Disable pad wakeup capability */
>> +	return omap_hwmod_set_ioring_wakeup(oh, false);
>> +}
>>  
>>  /**
>>   * omap_hwmod_enable_wakeup - allow device to wake up the system
>> @@ -2123,6 +2180,7 @@ int omap_hwmod_enable_wakeup(struct omap_hwmod *oh)
>>  	v = oh->_sysc_cache;
>>  	_enable_wakeup(oh, &v);
>>  	_write_sysconfig(v, oh);
>> +	omap_hwmod_enable_ioring_wakeup(oh);
>>  	spin_unlock_irqrestore(&oh->_lock, flags);
>>  
>>  	return 0;
>> @@ -2153,6 +2211,7 @@ int omap_hwmod_disable_wakeup(struct omap_hwmod *oh)
>>  	v = oh->_sysc_cache;
>>  	_disable_wakeup(oh, &v);
>>  	_write_sysconfig(v, oh);
>> +	omap_hwmod_disable_ioring_wakeup(oh);
>>  	spin_unlock_irqrestore(&oh->_lock, flags);
>>  
>>  	return 0;




More information about the linux-arm-kernel mailing list