[PATCHv4 07/13] ARM: s3c64xx: convert to MULTI_IRQ_HANDLER

[Jamie Iles]

On Wed, Nov 09, 2011 at 06:00:20PM +0530, Thomas Abraham wrote:
> On 9 November 2011 17:24, Jamie Iles <jamie at jamieiles.com> wrote:
> > On Wed, Nov 09, 2011 at 04:55:06PM +0530, Thomas Abraham wrote:
> >> Hi Jamie,
> >>
> >> On 4 November 2011 06:40, Jamie Iles <jamie at jamieiles.com> wrote:
> >> > Now that there is a generic IRQ handler for multiple VIC devices use it
> >> > for s3c64xx to help building multi platform kernels.
> >> >
> >> > Cc: Ben Dooks <ben-linux at fluff.org>
> >> > Signed-off-by: Jamie Iles <jamie at jamieiles.com>
> >> > ---
> >> >  arch/arm/Kconfig                                 |    1 +
> >> >  arch/arm/mach-s3c64xx/include/mach/entry-macro.S |    7 ++++---
> >> >  arch/arm/mach-s3c64xx/mach-anw6410.c             |    2 ++
> >> >  arch/arm/mach-s3c64xx/mach-crag6410.c            |    2 ++
> >> >  arch/arm/mach-s3c64xx/mach-hmt.c                 |    2 ++
> >> >  arch/arm/mach-s3c64xx/mach-mini6410.c            |    2 ++
> >> >  arch/arm/mach-s3c64xx/mach-ncp.c                 |    2 ++
> >> >  arch/arm/mach-s3c64xx/mach-real6410.c            |    2 ++
> >> >  arch/arm/mach-s3c64xx/mach-smartq5.c             |    2 ++
> >> >  arch/arm/mach-s3c64xx/mach-smartq7.c             |    2 ++
> >> >  arch/arm/mach-s3c64xx/mach-smdk6400.c            |    2 ++
> >> >  arch/arm/mach-s3c64xx/mach-smdk6410.c            |    2 ++
> >> >  12 files changed, 25 insertions(+), 3 deletions(-)
> >> >
> >>
> >> I have tested this patch series on smdk6410 board (s3c64xx) using the
> >> following repositorty and branch
> >>
> >> https://github.com/jamieiles/linux-2.6-ji.git  branch: vic-dt
> >>
> >> There is a crash while booting. Am I using the right tree and branch?
> >> The following is the boot log. Is there any other config option to be
> >> enabled?
> >
> > Hmm, could you please try with the patch below applied?
[...]
> 
> This patch solves the issue and both smdk6410 and smdkv210 works fine.

Brilliant, thanks Thomas.  Mind if I add a Tested-by from you providing 
the fixup patch is applied first?

Jamie