[PATCH v2] IMX/SDMA : save the real count for one DMA transaction.
Huang Shijie
b32955 at freescale.com
Wed Nov 30 21:13:03 EST 2011
When we use the SDMA in the UART driver(such as imx6q), we will
meet one situation:
Assume we set 64 bytes for the RX DMA buffer.
The receiving DMA buffer has received some data, but not full.
An Aging DMA request will be received by the SDMA controller if we enable the
IDDMAEN(UCR4[6]) in this case.
So the UART driver needs to know the count of the real received bytes,
and push them to upper layer.
Add two new fields to sdmac, and update the `residue` in sdma_tx_status().
Signed-off-by: Huang Shijie <b32955 at freescale.com>
---
drivers/dma/imx-sdma.c | 10 ++++++++--
1 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index f993955..05ba3a8 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -268,6 +268,7 @@ struct sdma_channel {
struct dma_async_tx_descriptor desc;
dma_cookie_t last_completed;
enum dma_status status;
+ unsigned int chn_count, chn_real_count;
};
#define IMX_DMA_SG_LOOP (1 << 0)
@@ -503,6 +504,7 @@ static void mxc_sdma_handle_channel_normal(struct sdma_channel *sdmac)
struct sdma_buffer_descriptor *bd;
int i, error = 0;
+ sdmac->chn_real_count = 0;
/*
* non loop mode. Iterate over all descriptors, collect
* errors and call callback function
@@ -512,6 +514,7 @@ static void mxc_sdma_handle_channel_normal(struct sdma_channel *sdmac)
if (bd->mode.status & (BD_DONE | BD_RROR))
error = -EIO;
+ sdmac->chn_real_count += bd->mode.count;
}
if (error)
@@ -519,9 +522,9 @@ static void mxc_sdma_handle_channel_normal(struct sdma_channel *sdmac)
else
sdmac->status = DMA_SUCCESS;
+ sdmac->last_completed = sdmac->desc.cookie;
if (sdmac->desc.callback)
sdmac->desc.callback(sdmac->desc.callback_param);
- sdmac->last_completed = sdmac->desc.cookie;
}
static void mxc_sdma_handle_channel(struct sdma_channel *sdmac)
@@ -941,6 +944,7 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
goto err_out;
}
+ sdmac->chn_count = 0;
for_each_sg(sgl, sg, sg_len, i) {
struct sdma_buffer_descriptor *bd = &sdmac->bd[i];
int param;
@@ -957,6 +961,7 @@ static struct dma_async_tx_descriptor *sdma_prep_slave_sg(
}
bd->mode.count = count;
+ sdmac->chn_count += count;
if (sdmac->word_size > DMA_SLAVE_BUSWIDTH_4_BYTES) {
ret = -EINVAL;
@@ -1119,7 +1124,8 @@ static enum dma_status sdma_tx_status(struct dma_chan *chan,
last_used = chan->cookie;
- dma_set_tx_state(txstate, sdmac->last_completed, last_used, 0);
+ dma_set_tx_state(txstate, sdmac->last_completed, last_used,
+ sdmac->chn_count - sdmac->chn_real_count);
return sdmac->status;
}
--
1.7.3.2
More information about the linux-arm-kernel
mailing list