[PATCH 33/41] ARM: restart: spear: use new restart hook
Russell King - ARM Linux
linux at arm.linux.org.uk
Thu Nov 24 15:32:40 EST 2011
Ack?
On Sun, Nov 06, 2011 at 05:51:09PM +0000, Russell King - ARM Linux wrote:
> Hook these platforms restart code into the new restart hook rather
> than using arch_reset().
>
> Signed-off-by: Russell King <rmk+kernel at arm.linux.org.uk>
> ---
> arch/arm/mach-spear3xx/include/mach/generic.h | 2 +
> arch/arm/mach-spear3xx/spear300_evb.c | 1 +
> arch/arm/mach-spear3xx/spear310_evb.c | 1 +
> arch/arm/mach-spear3xx/spear320_evb.c | 1 +
> arch/arm/mach-spear6xx/include/mach/generic.h | 2 +
> arch/arm/mach-spear6xx/spear600_evb.c | 1 +
> arch/arm/plat-spear/Makefile | 2 +-
> arch/arm/plat-spear/include/plat/system.h | 11 ----------
> arch/arm/plat-spear/restart.c | 27 +++++++++++++++++++++++++
> 9 files changed, 36 insertions(+), 12 deletions(-)
> create mode 100644 arch/arm/plat-spear/restart.c
>
> diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h
> index b8f31c3..14276e5 100644
> --- a/arch/arm/mach-spear3xx/include/mach/generic.h
> +++ b/arch/arm/mach-spear3xx/include/mach/generic.h
> @@ -42,6 +42,8 @@ void __init spear3xx_map_io(void);
> void __init spear3xx_init_irq(void);
> void __init spear3xx_init(void);
>
> +void spear_restart(char, const char *);
> +
> /* pad mux declarations */
> #define PMX_FIRDA_MASK (1 << 14)
> #define PMX_I2C_MASK (1 << 13)
> diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c
> index a5ff98e..8b429f0 100644
> --- a/arch/arm/mach-spear3xx/spear300_evb.c
> +++ b/arch/arm/mach-spear3xx/spear300_evb.c
> @@ -69,4 +69,5 @@ MACHINE_START(SPEAR300, "ST-SPEAR300-EVB")
> .init_irq = spear3xx_init_irq,
> .timer = &spear3xx_timer,
> .init_machine = spear300_evb_init,
> + .restart = spear_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c
> index 45d180d..a11d6ea 100644
> --- a/arch/arm/mach-spear3xx/spear310_evb.c
> +++ b/arch/arm/mach-spear3xx/spear310_evb.c
> @@ -75,4 +75,5 @@ MACHINE_START(SPEAR310, "ST-SPEAR310-EVB")
> .init_irq = spear3xx_init_irq,
> .timer = &spear3xx_timer,
> .init_machine = spear310_evb_init,
> + .restart = spear_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c
> index 2287984..4239a70 100644
> --- a/arch/arm/mach-spear3xx/spear320_evb.c
> +++ b/arch/arm/mach-spear3xx/spear320_evb.c
> @@ -73,4 +73,5 @@ MACHINE_START(SPEAR320, "ST-SPEAR320-EVB")
> .init_irq = spear3xx_init_irq,
> .timer = &spear3xx_timer,
> .init_machine = spear320_evb_init,
> + .restart = spear_restart,
> MACHINE_END
> diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h
> index 183f023..116b993 100644
> --- a/arch/arm/mach-spear6xx/include/mach/generic.h
> +++ b/arch/arm/mach-spear6xx/include/mach/generic.h
> @@ -41,6 +41,8 @@ void __init spear6xx_init(void);
> void __init spear600_init(void);
> void __init spear6xx_clk_init(void);
>
> +void spear_restart(char, const char *);
> +
> /* Add spear600 machine device structure declarations here */
>
> #endif /* __MACH_GENERIC_H */
> diff --git a/arch/arm/mach-spear6xx/spear600_evb.c b/arch/arm/mach-spear6xx/spear600_evb.c
> index 8238fe3..0a16559 100644
> --- a/arch/arm/mach-spear6xx/spear600_evb.c
> +++ b/arch/arm/mach-spear6xx/spear600_evb.c
> @@ -48,4 +48,5 @@ MACHINE_START(SPEAR600, "ST-SPEAR600-EVB")
> .init_irq = spear6xx_init_irq,
> .timer = &spear6xx_timer,
> .init_machine = spear600_evb_init,
> + .restart = spear_restart,
> MACHINE_END
> diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile
> index b4f340b..e0f2e5b 100644
> --- a/arch/arm/plat-spear/Makefile
> +++ b/arch/arm/plat-spear/Makefile
> @@ -3,6 +3,6 @@
> #
>
> # Common support
> -obj-y := clock.o time.o
> +obj-y := clock.o restart.o time.o
>
> obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o
> diff --git a/arch/arm/plat-spear/include/plat/system.h b/arch/arm/plat-spear/include/plat/system.h
> index 1171f22..4a0d125 100644
> --- a/arch/arm/plat-spear/include/plat/system.h
> +++ b/arch/arm/plat-spear/include/plat/system.h
> @@ -14,10 +14,6 @@
> #ifndef __PLAT_SYSTEM_H
> #define __PLAT_SYSTEM_H
>
> -#include <linux/io.h>
> -#include <asm/hardware/sp810.h>
> -#include <mach/hardware.h>
> -
> static inline void arch_idle(void)
> {
> /*
> @@ -29,13 +25,6 @@ static inline void arch_idle(void)
>
> static inline void arch_reset(char mode, const char *cmd)
> {
> - if (mode == 's') {
> - /* software reset, Jump into ROM at address 0 */
> - soft_restart(0);
> - } else {
> - /* hardware reset, Use on-chip reset capability */
> - sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
> - }
> }
>
> #endif /* __PLAT_SYSTEM_H */
> diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c
> new file mode 100644
> index 0000000..2b4e3d8
> --- /dev/null
> +++ b/arch/arm/plat-spear/restart.c
> @@ -0,0 +1,27 @@
> +/*
> + * arch/arm/plat-spear/restart.c
> + *
> + * SPEAr platform specific restart functions
> + *
> + * Copyright (C) 2009 ST Microelectronics
> + * Viresh Kumar<viresh.kumar at st.com>
> + *
> + * This file is licensed under the terms of the GNU General Public
> + * License version 2. This program is licensed "as is" without any
> + * warranty of any kind, whether express or implied.
> + */
> +#include <linux/io.h>
> +#include <asm/hardware/sp810.h>
> +#include <mach/hardware.h>
> +#include <mach/generic.h>
> +
> +void spear_restart(char mode, const char *cmd)
> +{
> + if (mode == 's') {
> + /* software reset, Jump into ROM at address 0 */
> + soft_restart(0);
> + } else {
> + /* hardware reset, Use on-chip reset capability */
> + sysctl_soft_reset((void __iomem *)VA_SPEAR_SYS_CTRL_BASE);
> + }
> +}
> --
> 1.7.4.4
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
More information about the linux-arm-kernel
mailing list