[PATCH] watchdog: fix initialisation printout in s3c2410_wdt

[Thomas Abraham]

On 16 November 2011 14:16, Dmitry Artamonow <mad_soft at inbox.ru> wrote:
> Looks like a typo creeped in, and driver prints
> s3c2410-wdt s3c2410-wdt: watchdog active, reset abled, irq abled
>
> instead of
> s3c2410-wdt s3c2410-wdt: watchdog active, reset enabled, irq enabled
>
> Also it may completely disinform about irq status, as it prints
> "irq enabled" when S3C2410_WTCON_INTEN is in fact 0.
>
> Fix it.
>
> Signed-off-by: Dmitry Artamonow <mad_soft at inbox.ru>
> ---
>
> It seems to be here for a long time, but I don't think it's
> important enough for cc-ing stable.
>
> Also I haven't tested it, as I don't have a hardware, but it's
> rather trivial (and yes, I checked with datasheet that 1 in
> S3C2410_WTCON_*EN bits really means 'enabled')
>

Tested on Exynos4210 based Origen board. This patch fixed in incorrect
"irq enabled" message at bootup. Thanks for this fix.

Tested-by: Thomas Abraham <thomas.abraham at linaro.org>

>  drivers/watchdog/s3c2410_wdt.c |    4 ++--
>  1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
> index 5de7e4f..a79e384 100644
> --- a/drivers/watchdog/s3c2410_wdt.c
> +++ b/drivers/watchdog/s3c2410_wdt.c
> @@ -401,8 +401,8 @@ static int __devinit s3c2410wdt_probe(struct platform_device *pdev)
>
>        dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n",
>                 (wtcon & S3C2410_WTCON_ENABLE) ?  "" : "in",
> -                (wtcon & S3C2410_WTCON_RSTEN) ? "" : "dis",
> -                (wtcon & S3C2410_WTCON_INTEN) ? "" : "en");
> +                (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis",
> +                (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis");
>
>        return 0;
>
> --
> 1.7.5.1.300.gc565c
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>