[PATCH v7 02/11] ARM: pxa: rename IRQ_GPIO to PXA_GPIO_TO_IRQ
Haojian Zhuang
haojian.zhuang at marvell.com
Tue Nov 8 21:47:22 EST 2011
Avoid potential naming confliction since multiple architecture will be built
in a single kernel.
Signed-off-by: Haojian Zhuang <haojian.zhuang at marvell.com>
Acked-by: Grant Likely <grant.likely at secretlab.ca>
---
arch/arm/mach-pxa/am200epd.c | 4 +-
arch/arm/mach-pxa/am300epd.c | 4 +-
arch/arm/mach-pxa/balloon3.c | 2 +-
arch/arm/mach-pxa/cm-x270.c | 2 +-
arch/arm/mach-pxa/cm-x2xx.c | 4 +-
arch/arm/mach-pxa/cm-x300.c | 6 +-
arch/arm/mach-pxa/em-x270.c | 6 +-
arch/arm/mach-pxa/eseries.c | 4 +-
arch/arm/mach-pxa/idp.c | 4 +-
arch/arm/mach-pxa/include/mach/balloon3.h | 6 +-
arch/arm/mach-pxa/include/mach/corgi.h | 24 +++++-----
arch/arm/mach-pxa/include/mach/gpio.h | 2 +-
arch/arm/mach-pxa/include/mach/gumstix.h | 20 +++++-----
arch/arm/mach-pxa/include/mach/idp.h | 14 +++---
arch/arm/mach-pxa/include/mach/irqs.h | 2 +-
arch/arm/mach-pxa/include/mach/palmld.h | 8 ++--
arch/arm/mach-pxa/include/mach/palmt5.h | 8 ++--
arch/arm/mach-pxa/include/mach/palmtc.h | 4 +-
arch/arm/mach-pxa/include/mach/palmtx.h | 8 ++--
arch/arm/mach-pxa/include/mach/pcm027.h | 8 ++--
arch/arm/mach-pxa/include/mach/pcm990_baseboard.h | 14 +++---
arch/arm/mach-pxa/include/mach/poodle.h | 24 +++++-----
arch/arm/mach-pxa/include/mach/spitz.h | 34 ++++++++--------
arch/arm/mach-pxa/include/mach/tosa.h | 46 ++++++++++----------
arch/arm/mach-pxa/include/mach/trizeps4.h | 16 ++++----
arch/arm/mach-pxa/littleton.c | 4 +-
arch/arm/mach-pxa/lpd270.c | 4 +-
arch/arm/mach-pxa/lubbock.c | 4 +-
arch/arm/mach-pxa/mainstone.c | 4 +-
arch/arm/mach-pxa/poodle.c | 4 +-
arch/arm/mach-pxa/sharpsl_pm.c | 24 +++++-----
arch/arm/mach-pxa/stargate2.c | 22 +++++-----
arch/arm/mach-pxa/vpac270.c | 6 +-
arch/arm/mach-pxa/zylonite_pxa300.c | 4 +-
34 files changed, 175 insertions(+), 175 deletions(-)
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
index 4cb069f..ccdac4b 100644
--- a/arch/arm/mach-pxa/am200epd.c
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -138,7 +138,7 @@ static void am200_cleanup(struct metronomefb_par *par)
{
int i;
- free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+ free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
for (i = 0; i < ARRAY_SIZE(gpios); i++)
gpio_free(gpios[i]);
@@ -292,7 +292,7 @@ static int am200_setup_irq(struct fb_info *info)
{
int ret;
- ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq,
+ ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am200_handle_irq,
IRQF_DISABLED|IRQF_TRIGGER_FALLING,
"AM200", info->par);
if (ret)
diff --git a/arch/arm/mach-pxa/am300epd.c b/arch/arm/mach-pxa/am300epd.c
index fa8bad2..76c4b94 100644
--- a/arch/arm/mach-pxa/am300epd.c
+++ b/arch/arm/mach-pxa/am300epd.c
@@ -176,7 +176,7 @@ static void am300_cleanup(struct broadsheetfb_par *par)
{
int i;
- free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+ free_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), par);
for (i = 0; i < ARRAY_SIZE(gpios); i++)
gpio_free(gpios[i]);
@@ -240,7 +240,7 @@ static int am300_setup_irq(struct fb_info *info)
int ret;
struct broadsheetfb_par *par = info->par;
- ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am300_handle_irq,
+ ret = request_irq(PXA_GPIO_TO_IRQ(RDY_GPIO_PIN), am300_handle_irq,
IRQF_DISABLED|IRQF_TRIGGER_RISING,
"AM300", par);
if (ret)
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index fc0b854..1c7890c 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -179,7 +179,7 @@ static unsigned long balloon3_ac97_pin_config[] __initdata = {
};
static struct ucb1400_pdata vpac270_ucb1400_pdata = {
- .irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ),
+ .irq = PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ),
};
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 13518a7..4ebcee5 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -33,7 +33,7 @@
/* GPIO IRQ usage */
#define GPIO83_MMC_IRQ (83)
-#define CMX270_MMC_IRQ IRQ_GPIO(GPIO83_MMC_IRQ)
+#define CMX270_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO83_MMC_IRQ)
/* MMC power enable */
#define GPIO105_MMC_POWER (105)
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index f2e4190..9344a0e 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -58,8 +58,8 @@ extern void cmx270_init(void);
#define CMX255_GPIO_IT8152_IRQ (0)
#define CMX270_GPIO_IT8152_IRQ (22)
-#define CMX255_ETHIRQ IRQ_GPIO(GPIO22_ETHIRQ)
-#define CMX270_ETHIRQ IRQ_GPIO(GPIO10_ETHIRQ)
+#define CMX255_ETHIRQ PXA_GPIO_TO_IRQ(GPIO22_ETHIRQ)
+#define CMX270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO10_ETHIRQ)
#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
static struct resource cmx255_dm9000_resource[] = {
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 3a7387f..21ac8e3 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -64,7 +64,7 @@
#define GPIO82_MMC_IRQ (82)
#define GPIO85_MMC_WP (85)
-#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ)
+#define CM_X300_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO82_MMC_IRQ)
#define GPIO95_RTC_CS (95)
#define GPIO96_RTC_WR (96)
@@ -229,8 +229,8 @@ static struct resource dm9000_resources[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
- .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO99)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 94acc0b..3358f4d 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -70,7 +70,7 @@
/* common GPIOs */
#define GPIO11_NAND_CS (11)
#define GPIO41_ETHIRQ (41)
-#define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_ETHIRQ PXA_GPIO_TO_IRQ(GPIO41_ETHIRQ)
#define GPIO115_WLAN_PWEN (115)
#define GPIO19_WLAN_STRAP (19)
#define GPIO9_USB_VBUS_EN (9)
@@ -805,7 +805,7 @@ static struct spi_board_info em_x270_spi_devices[] __initdata = {
.modalias = "libertas_spi",
.max_speed_hz = 13000000,
.bus_num = 2,
- .irq = IRQ_GPIO(116),
+ .irq = PXA_GPIO_TO_IRQ(116),
.chip_select = 0,
.controller_data = &em_x270_libertas_chip,
.platform_data = &em_x270_libertas_pdata,
@@ -1203,7 +1203,7 @@ static struct da903x_platform_data em_x270_da9030_info = {
static struct i2c_board_info em_x270_i2c_pmic_info = {
I2C_BOARD_INFO("da9030", 0x49),
- .irq = IRQ_GPIO(0),
+ .irq = PXA_GPIO_TO_IRQ(0),
.platform_data = &em_x270_da9030_info,
};
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index d82b7aa..e556a1e 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -119,8 +119,8 @@ struct resource eseries_tmio_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
- .end = IRQ_GPIO(GPIO_ESERIES_TMIO_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO_ESERIES_TMIO_IRQ),
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index ddf20e5..bb98ff5 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -75,8 +75,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_GPIO(4),
- .end = IRQ_GPIO(4),
+ .start = PXA_GPIO_TO_IRQ(4),
+ .end = PXA_GPIO_TO_IRQ(4),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/include/mach/balloon3.h b/arch/arm/mach-pxa/include/mach/balloon3.h
index 6d7eab3..f02fa1e 100644
--- a/arch/arm/mach-pxa/include/mach/balloon3.h
+++ b/arch/arm/mach-pxa/include/mach/balloon3.h
@@ -172,9 +172,9 @@ enum balloon3_features {
/* Balloon3 Interrupts */
#define BALLOON3_IRQ(x) (IRQ_BOARD_START + (x))
-#define BALLOON3_AUX_NIRQ IRQ_GPIO(BALLOON3_GPIO_AUX_NIRQ)
-#define BALLOON3_CODEC_IRQ IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ)
-#define BALLOON3_S0_CD_IRQ IRQ_GPIO(BALLOON3_GPIO_S0_CD)
+#define BALLOON3_AUX_NIRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_AUX_NIRQ)
+#define BALLOON3_CODEC_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_CODEC_IRQ)
+#define BALLOON3_S0_CD_IRQ PXA_GPIO_TO_IRQ(BALLOON3_GPIO_S0_CD)
#define BALLOON3_NR_IRQS (IRQ_BOARD_START + 16)
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
index 5dfd119..c9f8617 100644
--- a/arch/arm/mach-pxa/include/mach/corgi.h
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -66,18 +66,18 @@
/*
* Corgi Interrupts
*/
-#define CORGI_IRQ_GPIO_KEY_INT IRQ_GPIO(0)
-#define CORGI_IRQ_GPIO_AC_IN IRQ_GPIO(1)
-#define CORGI_IRQ_GPIO_WAKEUP IRQ_GPIO(3)
-#define CORGI_IRQ_GPIO_AK_INT IRQ_GPIO(4)
-#define CORGI_IRQ_GPIO_TP_INT IRQ_GPIO(5)
-#define CORGI_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9)
-#define CORGI_IRQ_GPIO_nSD_INT IRQ_GPIO(10)
-#define CORGI_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(11)
-#define CORGI_IRQ_GPIO_CF_CD IRQ_GPIO(14)
-#define CORGI_IRQ_GPIO_CHRG_FULL IRQ_GPIO(16) /* Battery fully charged */
-#define CORGI_IRQ_GPIO_CF_IRQ IRQ_GPIO(17)
-#define CORGI_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(58+(a)) /* Keyboard Sense lines */
+#define CORGI_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(0)
+#define CORGI_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(1)
+#define CORGI_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(3)
+#define CORGI_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(4)
+#define CORGI_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(5)
+#define CORGI_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(9)
+#define CORGI_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(10)
+#define CORGI_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(11)
+#define CORGI_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(14)
+#define CORGI_IRQ_GPIO_CHRG_FULL PXA_GPIO_TO_IRQ(16) /* Battery fully charged */
+#define CORGI_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(17)
+#define CORGI_IRQ_GPIO_KEY_SENSE(a) PXA_GPIO_TO_IRQ(58+(a)) /* Keyboard Sense lines */
/*
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
index 004cade..07fa3ba 100644
--- a/arch/arm/mach-pxa/include/mach/gpio.h
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -28,7 +28,7 @@
/* The defines for the driver are needed for the accelerated accessors */
#include "gpio-pxa.h"
-#define gpio_to_irq(gpio) IRQ_GPIO(gpio)
+#define gpio_to_irq(gpio) PXA_GPIO_TO_IRQ(gpio)
static inline int irq_to_gpio(unsigned int irq)
{
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
index 9b89868..dba14b6 100644
--- a/arch/arm/mach-pxa/include/mach/gumstix.h
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -24,7 +24,7 @@ has detected a cable insertion; driven low otherwise. */
#define GPIO_GUMSTIX_USB_GPIOx 41
/* usb state change */
-#define GUMSTIX_USB_INTR_IRQ IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
+#define GUMSTIX_USB_INTR_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_USB_GPIOn)
#define GPIO_GUMSTIX_USB_GPIOn_MD (GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
#define GPIO_GUMSTIX_USB_GPIOx_CON_MD (GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
@@ -35,7 +35,7 @@ has detected a cable insertion; driven low otherwise. */
*/
#define GUMSTIX_GPIO_nSD_WP 22 /* SD Write Protect */
#define GUMSTIX_GPIO_nSD_DETECT 11 /* MMC/SD Card Detect */
-#define GUMSTIX_IRQ_GPIO_nSD_DETECT IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT)
+#define GUMSTIX_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(GUMSTIX_GPIO_nSD_DETECT)
/*
* SMC Ethernet definitions
@@ -49,10 +49,10 @@ has detected a cable insertion; driven low otherwise. */
#define GPIO_GUMSTIX_ETH0 36
#define GPIO_GUMSTIX_ETH0_MD (GPIO_GUMSTIX_ETH0 | GPIO_IN)
-#define GUMSTIX_ETH0_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH0)
+#define GUMSTIX_ETH0_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH0)
#define GPIO_GUMSTIX_ETH1 27
#define GPIO_GUMSTIX_ETH1_MD (GPIO_GUMSTIX_ETH1 | GPIO_IN)
-#define GUMSTIX_ETH1_IRQ IRQ_GPIO(GPIO_GUMSTIX_ETH1)
+#define GUMSTIX_ETH1_IRQ PXA_GPIO_TO_IRQ(GPIO_GUMSTIX_ETH1)
/* CF reset line */
@@ -63,18 +63,18 @@ has detected a cable insertion; driven low otherwise. */
#define GPIO4_nSTSCHG GPIO4_nBVD1
#define GPIO11_nCD 11
#define GPIO26_PRDY_nBSY 26
-#define GUMSTIX_S0_nSTSCHG_IRQ IRQ_GPIO(GPIO4_nSTSCHG)
-#define GUMSTIX_S0_nCD_IRQ IRQ_GPIO(GPIO11_nCD)
-#define GUMSTIX_S0_PRDY_nBSY_IRQ IRQ_GPIO(GPIO26_PRDY_nBSY)
+#define GUMSTIX_S0_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO4_nSTSCHG)
+#define GUMSTIX_S0_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO11_nCD)
+#define GUMSTIX_S0_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO26_PRDY_nBSY)
/* CF slot 1 */
#define GPIO18_nBVD1 18
#define GPIO18_nSTSCHG GPIO18_nBVD1
#define GPIO36_nCD 36
#define GPIO27_PRDY_nBSY 27
-#define GUMSTIX_S1_nSTSCHG_IRQ IRQ_GPIO(GPIO18_nSTSCHG)
-#define GUMSTIX_S1_nCD_IRQ IRQ_GPIO(GPIO36_nCD)
-#define GUMSTIX_S1_PRDY_nBSY_IRQ IRQ_GPIO(GPIO27_PRDY_nBSY)
+#define GUMSTIX_S1_nSTSCHG_IRQ PXA_GPIO_TO_IRQ(GPIO18_nSTSCHG)
+#define GUMSTIX_S1_nCD_IRQ PXA_GPIO_TO_IRQ(GPIO36_nCD)
+#define GUMSTIX_S1_PRDY_nBSY_IRQ PXA_GPIO_TO_IRQ(GPIO27_PRDY_nBSY)
/* CF GPIO line modes */
#define GPIO4_nSTSCHG_MD (GPIO4_nSTSCHG | GPIO_IN)
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
index 5eff96f..a7f912f 100644
--- a/arch/arm/mach-pxa/include/mach/idp.h
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -135,24 +135,24 @@
/* A listing of interrupts used by external hardware devices */
-#define TOUCH_PANEL_IRQ IRQ_GPIO(5)
-#define IDE_IRQ IRQ_GPIO(21)
+#define TOUCH_PANEL_IRQ PXA_GPIO_TO_IRQ(5)
+#define IDE_IRQ PXA_GPIO_TO_IRQ(21)
#define TOUCH_PANEL_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
-#define ETHERNET_IRQ IRQ_GPIO(4)
+#define ETHERNET_IRQ PXA_GPIO_TO_IRQ(4)
#define ETHERNET_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING
-#define PCMCIA_S0_CD_VALID IRQ_GPIO(7)
+#define PCMCIA_S0_CD_VALID PXA_GPIO_TO_IRQ(7)
#define PCMCIA_S0_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH
-#define PCMCIA_S1_CD_VALID IRQ_GPIO(8)
+#define PCMCIA_S1_CD_VALID PXA_GPIO_TO_IRQ(8)
#define PCMCIA_S1_CD_VALID_EDGE IRQ_TYPE_EDGE_BOTH
-#define PCMCIA_S0_RDYINT IRQ_GPIO(19)
-#define PCMCIA_S1_RDYINT IRQ_GPIO(22)
+#define PCMCIA_S0_RDYINT PXA_GPIO_TO_IRQ(19)
+#define PCMCIA_S1_RDYINT PXA_GPIO_TO_IRQ(22)
/*
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
index 7cc5a78..1f99664 100644
--- a/arch/arm/mach-pxa/include/mach/irqs.h
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -91,7 +91,7 @@
#define PXA_GPIO_IRQ_NUM (192)
#define GPIO_2_x_TO_IRQ(x) (PXA_GPIO_IRQ_BASE + (x))
-#define IRQ_GPIO(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
+#define PXA_GPIO_TO_IRQ(x) (((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
/*
* The following interrupts are for board specific purposes. Since
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index ae536e8..2c44713 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -68,10 +68,10 @@
/* 20, 53 and 86 are usb related too */
/* INTERRUPTS */
-#define IRQ_GPIO_PALMLD_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMLD_GPIO_RESET)
-#define IRQ_GPIO_PALMLD_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMLD_SD_DETECT_N)
-#define IRQ_GPIO_PALMLD_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMLD_WM9712_IRQ)
-#define IRQ_GPIO_PALMLD_IDE_IRQ IRQ_GPIO(GPIO_NR_PALMLD_IDE_IRQ)
+#define IRQ_GPIO_PALMLD_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_GPIO_RESET)
+#define IRQ_GPIO_PALMLD_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_SD_DETECT_N)
+#define IRQ_GPIO_PALMLD_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_WM9712_IRQ)
+#define IRQ_GPIO_PALMLD_IDE_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMLD_IDE_IRQ)
/** HERE ARE INIT VALUES **/
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index 6baf746..0bd4f03 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -48,10 +48,10 @@
#define GPIO_NR_PALMT5_BT_RESET 83
/* INTERRUPTS */
-#define IRQ_GPIO_PALMT5_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMT5_SD_DETECT_N)
-#define IRQ_GPIO_PALMT5_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMT5_WM9712_IRQ)
-#define IRQ_GPIO_PALMT5_USB_DETECT IRQ_GPIO(GPIO_NR_PALMT5_USB_DETECT)
-#define IRQ_GPIO_PALMT5_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMT5_GPIO_RESET)
+#define IRQ_GPIO_PALMT5_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_SD_DETECT_N)
+#define IRQ_GPIO_PALMT5_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_WM9712_IRQ)
+#define IRQ_GPIO_PALMT5_USB_DETECT PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_USB_DETECT)
+#define IRQ_GPIO_PALMT5_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMT5_GPIO_RESET)
/** HERE ARE INIT VALUES **/
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
index 3f9dd3f..c383a21 100644
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -52,8 +52,8 @@
#define GPIO_NR_PALMTC_IR_DISABLE 45
/* IRQs */
-#define IRQ_GPIO_PALMTC_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTC_SD_DETECT_N)
-#define IRQ_GPIO_PALMTC_WLAN_READY IRQ_GPIO(GPIO_NR_PALMTC_WLAN_READY)
+#define IRQ_GPIO_PALMTC_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_SD_DETECT_N)
+#define IRQ_GPIO_PALMTC_WLAN_READY PXA_GPIO_TO_IRQ(GPIO_NR_PALMTC_WLAN_READY)
/* UCB1400 GPIOs */
#define GPIO_NR_PALMTC_POWER_DETECT (0x80 | 0x00)
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 7074a6e..f2e5303 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -62,10 +62,10 @@
#define GPIO_NR_PALMTX_NAND_BUFFER_DIR 79
/* INTERRUPTS */
-#define IRQ_GPIO_PALMTX_SD_DETECT_N IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N)
-#define IRQ_GPIO_PALMTX_WM9712_IRQ IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ)
-#define IRQ_GPIO_PALMTX_USB_DETECT IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT)
-#define IRQ_GPIO_PALMTX_GPIO_RESET IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET)
+#define IRQ_GPIO_PALMTX_SD_DETECT_N PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_SD_DETECT_N)
+#define IRQ_GPIO_PALMTX_WM9712_IRQ PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_WM9712_IRQ)
+#define IRQ_GPIO_PALMTX_USB_DETECT PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_USB_DETECT)
+#define IRQ_GPIO_PALMTX_GPIO_RESET PXA_GPIO_TO_IRQ(GPIO_NR_PALMTX_GPIO_RESET)
/** HERE ARE INIT VALUES **/
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
index 4bac588..6bf28de 100644
--- a/arch/arm/mach-pxa/include/mach/pcm027.h
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -34,7 +34,7 @@
/* I2C RTC */
#define PCM027_RTC_IRQ_GPIO 0
-#define PCM027_RTC_IRQ IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
+#define PCM027_RTC_IRQ PXA_GPIO_TO_IRQ(PCM027_RTC_IRQ_GPIO)
#define PCM027_RTC_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
#define ADR_PCM027_RTC 0x51 /* I2C address */
@@ -43,21 +43,21 @@
/* Ethernet chip (SMSC91C111) */
#define PCM027_ETH_IRQ_GPIO 52
-#define PCM027_ETH_IRQ IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
+#define PCM027_ETH_IRQ PXA_GPIO_TO_IRQ(PCM027_ETH_IRQ_GPIO)
#define PCM027_ETH_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define PCM027_ETH_PHYS PXA_CS5_PHYS
#define PCM027_ETH_SIZE (1*1024*1024)
/* CAN controller SJA1000 (unsupported yet) */
#define PCM027_CAN_IRQ_GPIO 114
-#define PCM027_CAN_IRQ IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
+#define PCM027_CAN_IRQ PXA_GPIO_TO_IRQ(PCM027_CAN_IRQ_GPIO)
#define PCM027_CAN_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
#define PCM027_CAN_PHYS 0x22000000
#define PCM027_CAN_SIZE 0x100
/* SPI GPIO expander (unsupported yet) */
#define PCM027_EGPIO_IRQ_GPIO 27
-#define PCM027_EGPIO_IRQ IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
+#define PCM027_EGPIO_IRQ PXA_GPIO_TO_IRQ(PCM027_EGPIO_IRQ_GPIO)
#define PCM027_EGPIO_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
#define PCM027_EGPIO_CS 24
/*
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
index 8a4383b..d727916 100644
--- a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -28,14 +28,14 @@
/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
#define PCM990_CTRL_INT_IRQ_GPIO 9
-#define PCM990_CTRL_INT_IRQ IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
+#define PCM990_CTRL_INT_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_INT_IRQ_GPIO)
#define PCM990_CTRL_INT_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define PCM990_CTRL_PHYS PXA_CS1_PHYS /* 16-Bit */
#define PCM990_CTRL_BASE 0xea000000
#define PCM990_CTRL_SIZE (1*1024*1024)
#define PCM990_CTRL_PWR_IRQ_GPIO 14
-#define PCM990_CTRL_PWR_IRQ IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
+#define PCM990_CTRL_PWR_IRQ PXA_GPIO_TO_IRQ(PCM990_CTRL_PWR_IRQ_GPIO)
#define PCM990_CTRL_PWR_IRQ_EDGE IRQ_TYPE_EDGE_RISING
/* visible CPLD (U7) registers */
@@ -132,7 +132,7 @@
* IDE
*/
#define PCM990_IDE_IRQ_GPIO 13
-#define PCM990_IDE_IRQ IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
+#define PCM990_IDE_IRQ PXA_GPIO_TO_IRQ(PCM990_IDE_IRQ_GPIO)
#define PCM990_IDE_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define PCM990_IDE_PLD_PHYS 0x20000000 /* 16 bit wide */
#define PCM990_IDE_PLD_BASE 0xee000000
@@ -188,11 +188,11 @@
* Compact Flash
*/
#define PCM990_CF_IRQ_GPIO 11
-#define PCM990_CF_IRQ IRQ_GPIO(PCM990_CF_IRQ_GPIO)
+#define PCM990_CF_IRQ PXA_GPIO_TO_IRQ(PCM990_CF_IRQ_GPIO)
#define PCM990_CF_IRQ_EDGE IRQ_TYPE_EDGE_RISING
#define PCM990_CF_CD_GPIO 12
-#define PCM990_CF_CD IRQ_GPIO(PCM990_CF_CD_GPIO)
+#define PCM990_CF_CD PXA_GPIO_TO_IRQ(PCM990_CF_CD_GPIO)
#define PCM990_CF_CD_EDGE IRQ_TYPE_EDGE_RISING
#define PCM990_CF_PLD_PHYS 0x30000000 /* 16 bit wide */
@@ -258,14 +258,14 @@
* Wolfson AC97 Touch
*/
#define PCM990_AC97_IRQ_GPIO 10
-#define PCM990_AC97_IRQ IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
+#define PCM990_AC97_IRQ PXA_GPIO_TO_IRQ(PCM990_AC97_IRQ_GPIO)
#define PCM990_AC97_IRQ_EDGE IRQ_TYPE_EDGE_RISING
/*
* MMC phyCORE
*/
#define PCM990_MMC0_IRQ_GPIO 9
-#define PCM990_MMC0_IRQ IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
+#define PCM990_MMC0_IRQ PXA_GPIO_TO_IRQ(PCM990_MMC0_IRQ_GPIO)
#define PCM990_MMC0_IRQ_EDGE IRQ_TYPE_EDGE_FALLING
/*
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
index 83d1cfd..763fdc4 100644
--- a/arch/arm/mach-pxa/include/mach/poodle.h
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -47,18 +47,18 @@
#define POODLE_GPIO_DISCHARGE_ON (42) /* Enable battery discharge */
/* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY IRQ_GPIO(0)
-#define POODLE_IRQ_GPIO_AC_IN IRQ_GPIO(1)
-#define POODLE_IRQ_GPIO_HP_IN IRQ_GPIO(4)
-#define POODLE_IRQ_GPIO_CO IRQ_GPIO(16)
-#define POODLE_IRQ_GPIO_TP_INT IRQ_GPIO(5)
-#define POODLE_IRQ_GPIO_WAKEUP IRQ_GPIO(11)
-#define POODLE_IRQ_GPIO_GA_INT IRQ_GPIO(10)
-#define POODLE_IRQ_GPIO_CF_IRQ IRQ_GPIO(17)
-#define POODLE_IRQ_GPIO_CF_CD IRQ_GPIO(14)
-#define POODLE_IRQ_GPIO_nSD_INT IRQ_GPIO(8)
-#define POODLE_IRQ_GPIO_nSD_DETECT IRQ_GPIO(9)
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(13)
+#define POODLE_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(0)
+#define POODLE_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(1)
+#define POODLE_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(4)
+#define POODLE_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(16)
+#define POODLE_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(5)
+#define POODLE_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(11)
+#define POODLE_IRQ_GPIO_GA_INT PXA_GPIO_TO_IRQ(10)
+#define POODLE_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(17)
+#define POODLE_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(14)
+#define POODLE_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(8)
+#define POODLE_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(9)
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(13)
/* SCOOP GPIOs */
#define POODLE_SCOOP_CHARGE_ON SCOOP_GPCR_PA11
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
index 685749a..273381a 100644
--- a/arch/arm/mach-pxa/include/mach/spitz.h
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -164,23 +164,23 @@
/* Spitz IRQ Definitions */
-#define SPITZ_IRQ_GPIO_KEY_INT IRQ_GPIO(SPITZ_GPIO_KEY_INT)
-#define SPITZ_IRQ_GPIO_AC_IN IRQ_GPIO(SPITZ_GPIO_AC_IN)
-#define SPITZ_IRQ_GPIO_AK_INT IRQ_GPIO(SPITZ_GPIO_AK_INT)
-#define SPITZ_IRQ_GPIO_HP_IN IRQ_GPIO(SPITZ_GPIO_HP_IN)
-#define SPITZ_IRQ_GPIO_TP_INT IRQ_GPIO(SPITZ_GPIO_TP_INT)
-#define SPITZ_IRQ_GPIO_SYNC IRQ_GPIO(SPITZ_GPIO_SYNC)
-#define SPITZ_IRQ_GPIO_ON_KEY IRQ_GPIO(SPITZ_GPIO_ON_KEY)
-#define SPITZ_IRQ_GPIO_SWA IRQ_GPIO(SPITZ_GPIO_SWA)
-#define SPITZ_IRQ_GPIO_SWB IRQ_GPIO(SPITZ_GPIO_SWB)
-#define SPITZ_IRQ_GPIO_BAT_COVER IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
-#define SPITZ_IRQ_GPIO_FATAL_BAT IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
-#define SPITZ_IRQ_GPIO_CO IRQ_GPIO(SPITZ_GPIO_CO)
-#define SPITZ_IRQ_GPIO_CF_IRQ IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
-#define SPITZ_IRQ_GPIO_CF_CD IRQ_GPIO(SPITZ_GPIO_CF_CD)
-#define SPITZ_IRQ_GPIO_CF2_IRQ IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
-#define SPITZ_IRQ_GPIO_nSD_INT IRQ_GPIO(SPITZ_GPIO_nSD_INT)
-#define SPITZ_IRQ_GPIO_nSD_DETECT IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
+#define SPITZ_IRQ_GPIO_KEY_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_KEY_INT)
+#define SPITZ_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_AC_IN)
+#define SPITZ_IRQ_GPIO_AK_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_AK_INT)
+#define SPITZ_IRQ_GPIO_HP_IN PXA_GPIO_TO_IRQ(SPITZ_GPIO_HP_IN)
+#define SPITZ_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_TP_INT)
+#define SPITZ_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(SPITZ_GPIO_SYNC)
+#define SPITZ_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(SPITZ_GPIO_ON_KEY)
+#define SPITZ_IRQ_GPIO_SWA PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWA)
+#define SPITZ_IRQ_GPIO_SWB PXA_GPIO_TO_IRQ(SPITZ_GPIO_SWB)
+#define SPITZ_IRQ_GPIO_BAT_COVER PXA_GPIO_TO_IRQ(SPITZ_GPIO_BAT_COVER)
+#define SPITZ_IRQ_GPIO_FATAL_BAT PXA_GPIO_TO_IRQ(SPITZ_GPIO_FATAL_BAT)
+#define SPITZ_IRQ_GPIO_CO PXA_GPIO_TO_IRQ(SPITZ_GPIO_CO)
+#define SPITZ_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_IRQ)
+#define SPITZ_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF_CD)
+#define SPITZ_IRQ_GPIO_CF2_IRQ PXA_GPIO_TO_IRQ(SPITZ_GPIO_CF2_IRQ)
+#define SPITZ_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_INT)
+#define SPITZ_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(SPITZ_GPIO_nSD_DETECT)
/*
* Shared data structures
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index 1272c4b..4653539 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -141,30 +141,30 @@
/*
* Interrupts
*/
-#define TOSA_IRQ_GPIO_WAKEUP IRQ_GPIO(TOSA_GPIO_WAKEUP)
-#define TOSA_IRQ_GPIO_AC_IN IRQ_GPIO(TOSA_GPIO_AC_IN)
-#define TOSA_IRQ_GPIO_RECORD_BTN IRQ_GPIO(TOSA_GPIO_RECORD_BTN)
-#define TOSA_IRQ_GPIO_SYNC IRQ_GPIO(TOSA_GPIO_SYNC)
-#define TOSA_IRQ_GPIO_USB_IN IRQ_GPIO(TOSA_GPIO_USB_IN)
-#define TOSA_IRQ_GPIO_JACKET_DETECT IRQ_GPIO(TOSA_GPIO_JACKET_DETECT)
-#define TOSA_IRQ_GPIO_nSD_INT IRQ_GPIO(TOSA_GPIO_nSD_INT)
-#define TOSA_IRQ_GPIO_nSD_DETECT IRQ_GPIO(TOSA_GPIO_nSD_DETECT)
-#define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
-#define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD)
-#define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
-#define TOSA_IRQ_GPIO_TC6393XB_INT IRQ_GPIO(TOSA_GPIO_TC6393XB_INT)
-#define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
-#define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN)
-#define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ)
-#define TOSA_IRQ_GPIO_ON_KEY IRQ_GPIO(TOSA_GPIO_ON_KEY)
-#define TOSA_IRQ_GPIO_VGA_LINE IRQ_GPIO(TOSA_GPIO_VGA_LINE)
-#define TOSA_IRQ_GPIO_TP_INT IRQ_GPIO(TOSA_GPIO_TP_INT)
-#define TOSA_IRQ_GPIO_JC_CF_IRQ IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ)
-#define TOSA_IRQ_GPIO_BAT_LOCKED IRQ_GPIO(TOSA_GPIO_BAT_LOCKED)
-#define TOSA_IRQ_GPIO_BAT1_LOW IRQ_GPIO(TOSA_GPIO_BAT1_LOW)
-#define TOSA_IRQ_GPIO_KEY_SENSE(a) IRQ_GPIO(69+(a))
-
-#define TOSA_IRQ_GPIO_MAIN_BAT_LOW IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW)
+#define TOSA_IRQ_GPIO_WAKEUP PXA_GPIO_TO_IRQ(TOSA_GPIO_WAKEUP)
+#define TOSA_IRQ_GPIO_AC_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN)
+#define TOSA_IRQ_GPIO_RECORD_BTN PXA_GPIO_TO_IRQ(TOSA_GPIO_RECORD_BTN)
+#define TOSA_IRQ_GPIO_SYNC PXA_GPIO_TO_IRQ(TOSA_GPIO_SYNC)
+#define TOSA_IRQ_GPIO_USB_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_USB_IN)
+#define TOSA_IRQ_GPIO_JACKET_DETECT PXA_GPIO_TO_IRQ(TOSA_GPIO_JACKET_DETECT)
+#define TOSA_IRQ_GPIO_nSD_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_INT)
+#define TOSA_IRQ_GPIO_nSD_DETECT PXA_GPIO_TO_IRQ(TOSA_GPIO_nSD_DETECT)
+#define TOSA_IRQ_GPIO_BAT1_CRG PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_CRG)
+#define TOSA_IRQ_GPIO_CF_CD PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_CD)
+#define TOSA_IRQ_GPIO_BAT0_CRG PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_CRG)
+#define TOSA_IRQ_GPIO_TC6393XB_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_TC6393XB_INT)
+#define TOSA_IRQ_GPIO_BAT0_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT0_LOW)
+#define TOSA_IRQ_GPIO_EAR_IN PXA_GPIO_TO_IRQ(TOSA_GPIO_EAR_IN)
+#define TOSA_IRQ_GPIO_CF_IRQ PXA_GPIO_TO_IRQ(TOSA_GPIO_CF_IRQ)
+#define TOSA_IRQ_GPIO_ON_KEY PXA_GPIO_TO_IRQ(TOSA_GPIO_ON_KEY)
+#define TOSA_IRQ_GPIO_VGA_LINE PXA_GPIO_TO_IRQ(TOSA_GPIO_VGA_LINE)
+#define TOSA_IRQ_GPIO_TP_INT PXA_GPIO_TO_IRQ(TOSA_GPIO_TP_INT)
+#define TOSA_IRQ_GPIO_JC_CF_IRQ PXA_GPIO_TO_IRQ(TOSA_GPIO_JC_CF_IRQ)
+#define TOSA_IRQ_GPIO_BAT_LOCKED PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT_LOCKED)
+#define TOSA_IRQ_GPIO_BAT1_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_BAT1_LOW)
+#define TOSA_IRQ_GPIO_KEY_SENSE(a) PXA_GPIO_TO_IRQ(69+(a))
+
+#define TOSA_IRQ_GPIO_MAIN_BAT_LOW PXA_GPIO_TO_IRQ(TOSA_GPIO_MAIN_BAT_LOW)
#define TOSA_KEY_SYNC KEY_102ND /* ??? */
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
index 903e1a2..d2ca010 100644
--- a/arch/arm/mach-pxa/include/mach/trizeps4.h
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -43,30 +43,30 @@
/* Ethernet Controller Davicom DM9000 */
#define GPIO_DM9000 101
-#define TRIZEPS4_ETH_IRQ IRQ_GPIO(GPIO_DM9000)
+#define TRIZEPS4_ETH_IRQ PXA_GPIO_TO_IRQ(GPIO_DM9000)
/* UCB1400 audio / TS-controller */
#define GPIO_UCB1400 1
-#define TRIZEPS4_UCB1400_IRQ IRQ_GPIO(GPIO_UCB1400)
+#define TRIZEPS4_UCB1400_IRQ PXA_GPIO_TO_IRQ(GPIO_UCB1400)
/* PCMCIA socket Compact Flash */
#define GPIO_PCD 11 /* PCMCIA Card Detect */
-#define TRIZEPS4_CD_IRQ IRQ_GPIO(GPIO_PCD)
+#define TRIZEPS4_CD_IRQ PXA_GPIO_TO_IRQ(GPIO_PCD)
#define GPIO_PRDY 13 /* READY / nINT */
-#define TRIZEPS4_READY_NINT IRQ_GPIO(GPIO_PRDY)
+#define TRIZEPS4_READY_NINT PXA_GPIO_TO_IRQ(GPIO_PRDY)
/* MMC socket */
#define GPIO_MMC_DET 12
-#define TRIZEPS4_MMC_IRQ IRQ_GPIO(GPIO_MMC_DET)
+#define TRIZEPS4_MMC_IRQ PXA_GPIO_TO_IRQ(GPIO_MMC_DET)
/* DOC NAND chip */
#define GPIO_DOC_LOCK 94
#define GPIO_DOC_IRQ 93
-#define TRIZEPS4_DOC_IRQ IRQ_GPIO(GPIO_DOC_IRQ)
+#define TRIZEPS4_DOC_IRQ PXA_GPIO_TO_IRQ(GPIO_DOC_IRQ)
/* SPI interface */
#define GPIO_SPI 53
-#define TRIZEPS4_SPI_IRQ IRQ_GPIO(GPIO_SPI)
+#define TRIZEPS4_SPI_IRQ PXA_GPIO_TO_IRQ(GPIO_SPI)
/* LEDS using tx2 / rx2 */
#define GPIO_SYS_BUSY_LED 46
@@ -74,7 +74,7 @@
/* Off-module PIC on ConXS board */
#define GPIO_PIC 0
-#define TRIZEPS4_PIC_IRQ IRQ_GPIO(GPIO_PIC)
+#define TRIZEPS4_PIC_IRQ PXA_GPIO_TO_IRQ(GPIO_PIC)
#ifdef CONFIG_MACH_TRIZEPS_CONXS
/* for CONXS base board define these registers */
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 0037e57..9cd2356 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -124,8 +124,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
- .end = IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
+ .start = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
+ .end = PXA_GPIO_TO_IRQ(mfp_to_gpio(MFP_PIN_GPIO90)),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
}
};
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index 1dd5302..565dd2f 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -152,8 +152,8 @@ static void __init lpd270_init_irq(void)
handle_level_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
- irq_set_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
- irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
+ irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
}
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index c48ce6d..2fb2b50 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -170,8 +170,8 @@ static void __init lubbock_init_irq(void)
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
- irq_set_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
- irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
+ irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
}
#ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 0567d39..ea62a99 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -178,8 +178,8 @@ static void __init mainstone_init_irq(void)
MST_INTMSKENA = 0;
MST_INTSETCLR = 0;
- irq_set_chained_handler(IRQ_GPIO(0), mainstone_irq_handler);
- irq_set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
+ irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
+ irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
}
#ifdef CONFIG_PM
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 50c8331..1e6d796 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -166,8 +166,8 @@ static struct resource locomo_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_GPIO(10),
- .end = IRQ_GPIO(10),
+ .start = PXA_GPIO_TO_IRQ(10),
+ .end = PXA_GPIO_TO_IRQ(10),
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 785880f..8d5168d 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -907,24 +907,24 @@ static int __devinit sharpsl_pm_probe(struct platform_device *pdev)
gpio_direction_input(sharpsl_pm.machinfo->gpio_batlock);
/* Register interrupt handlers */
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
+ if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "AC Input Detect", sharpsl_ac_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin));
}
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
+ if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Battery Cover", sharpsl_fatal_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock));
}
if (sharpsl_pm.machinfo->gpio_fatal) {
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
+ if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "Fatal Battery", sharpsl_fatal_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal));
}
}
if (sharpsl_pm.machinfo->batfull_irq) {
/* Register interrupt handler. */
- if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
- dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
+ if (request_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
+ dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull));
}
}
@@ -953,14 +953,14 @@ static int sharpsl_pm_remove(struct platform_device *pdev)
led_trigger_unregister_simple(sharpsl_charge_led_trigger);
- free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
- free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
+ free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr);
+ free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr);
if (sharpsl_pm.machinfo->gpio_fatal)
- free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
+ free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr);
if (sharpsl_pm.machinfo->batfull_irq)
- free_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
+ free_irq(PXA_GPIO_TO_IRQ(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr);
gpio_free(sharpsl_pm.machinfo->gpio_batlock);
gpio_free(sharpsl_pm.machinfo->gpio_batfull);
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 4c9a48b..bbf79d5 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -376,7 +376,7 @@ static struct spi_board_info spi_board_info[] __initdata = {
.bus_num = 1,
.chip_select = 0,
.controller_data = &staccel_chip_info,
- .irq = IRQ_GPIO(96),
+ .irq = PXA_GPIO_TO_IRQ(96),
}, {
.modalias = "cc2420",
.max_speed_hz = 6500000,
@@ -560,18 +560,18 @@ static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
/* Through a nand gate - Also beware, on V2 sensor board the
* pull up resistors are missing.
*/
- .irq = IRQ_GPIO(99),
+ .irq = PXA_GPIO_TO_IRQ(99),
}, { /* ITS400 Sensor board only */
.type = "tsl2561",
.addr = 0x49,
/* Through a nand gate - Also beware, on V2 sensor board the
* pull up resistors are missing.
*/
- .irq = IRQ_GPIO(99),
+ .irq = PXA_GPIO_TO_IRQ(99),
}, { /* ITS400 Sensor board only */
.type = "tmp175",
.addr = 0x4A,
- .irq = IRQ_GPIO(96),
+ .irq = PXA_GPIO_TO_IRQ(96),
}, { /* IMB400 Multimedia board */
.type = "wm8940",
.addr = 0x1A,
@@ -661,8 +661,8 @@ static struct resource smc91x_resources[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_GPIO(40),
- .end = IRQ_GPIO(40),
+ .start = PXA_GPIO_TO_IRQ(40),
+ .end = PXA_GPIO_TO_IRQ(40),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
@@ -707,7 +707,7 @@ static int stargate2_mci_init(struct device *dev,
}
gpio_direction_input(SG2_GPIO_nSD_DETECT);
- err = request_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT),
+ err = request_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT),
stargate2_detect_int,
IRQ_TYPE_EDGE_BOTH,
"MMC card detect",
@@ -738,7 +738,7 @@ static void stargate2_mci_setpower(struct device *dev, unsigned int vdd)
static void stargate2_mci_exit(struct device *dev, void *data)
{
- free_irq(IRQ_GPIO(SG2_GPIO_nSD_DETECT), data);
+ free_irq(PXA_GPIO_TO_IRQ(SG2_GPIO_nSD_DETECT), data);
gpio_free(SG2_SD_POWER_ENABLE);
gpio_free(SG2_GPIO_nSD_DETECT);
}
@@ -938,18 +938,18 @@ static struct i2c_board_info __initdata stargate2_i2c_board_info[] = {
/* Through a nand gate - Also beware, on V2 sensor board the
* pull up resistors are missing.
*/
- .irq = IRQ_GPIO(99),
+ .irq = PXA_GPIO_TO_IRQ(99),
}, { /* ITS400 Sensor board only */
.type = "tsl2561",
.addr = 0x49,
/* Through a nand gate - Also beware, on V2 sensor board the
* pull up resistors are missing.
*/
- .irq = IRQ_GPIO(99),
+ .irq = PXA_GPIO_TO_IRQ(99),
}, { /* ITS400 Sensor board only */
.type = "tmp175",
.addr = 0x4A,
- .irq = IRQ_GPIO(96),
+ .irq = PXA_GPIO_TO_IRQ(96),
},
};
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index a7539a6..585e4f4 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -395,8 +395,8 @@ static struct resource vpac270_dm9000_resources[] = {
.flags = IORESOURCE_MEM,
},
[2] = {
- .start = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
- .end = IRQ_GPIO(GPIO114_VPAC270_ETH_IRQ),
+ .start = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
+ .end = PXA_GPIO_TO_IRQ(GPIO114_VPAC270_ETH_IRQ),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
},
};
@@ -433,7 +433,7 @@ static pxa2xx_audio_ops_t vpac270_ac97_pdata = {
};
static struct ucb1400_pdata vpac270_ucb1400_pdata = {
- .irq = IRQ_GPIO(GPIO113_VPAC270_TS_IRQ),
+ .irq = PXA_GPIO_TO_IRQ(GPIO113_VPAC270_TS_IRQ),
};
static struct platform_device vpac270_ucb1400_device = {
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 93c64d8..86e59c0 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -231,12 +231,12 @@ static struct i2c_board_info zylonite_i2c_board_info[] = {
.type = "pca9539",
.addr = 0x74,
.platform_data = &gpio_exp[0],
- .irq = IRQ_GPIO(18),
+ .irq = PXA_GPIO_TO_IRQ(18),
}, {
.type = "pca9539",
.addr = 0x75,
.platform_data = &gpio_exp[1],
- .irq = IRQ_GPIO(19),
+ .irq = PXA_GPIO_TO_IRQ(19),
},
};
--
1.7.4.1
More information about the linux-arm-kernel
mailing list