July 2011 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Fri Jul 1 00:29:15 EDT 2011
Ending: Sun Jul 31 22:59:07 EDT 2011
Messages: 4313

• [PATCH] ARM: EXYNOS4: Add support Core1 Power On/Off with hotplug in/out   JungHi Min
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Artem Bityutskiy
• [PATCH v4] Add ARM cpu topology definition   Vincent Guittot
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   padma venkat
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Jassi Brar
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   padma venkat
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Lothar Waßmann
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Wolfram Sang
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Jassi Brar
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• reply: [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Huang Shijie
• reply: [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Uwe Kleine-König
• [PATCH 1/8] at91: introduce commom AT91_BASE_SYS   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/8] at91: factorize at91 interrupts init to soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/8] at91: remove AT91_DBGU offset from dbgu register macro   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/8] at91: use structure to store the current soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/8] at91: move clock subsystem init to soc generic init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/8] at91: move register clocks to soc generic init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/8] at91: factorize sram init   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/8] at91: add arch specific ioremap support   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v7 1/3] MTD : add the common code for GPMI-NFC controller driver   Huang Shijie
• [GIT PULL] omap iommu fixes for v3.0-rc   Ohad Ben-Cohen
• AT91: Fix pull requset   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH net-next] net: am79c961a: Omit check for multicast bit in netdev_for_each_mc_addr   David Miller
• [GIT PULL] omap iommu fixes for v3.0-rc   Tony Lindgren
• Unnecessary cache-line flush on page table updates ?   heechul Yun
• [RESEND] [PATCH 3.0] OMAP: drop __initdata tags from static struct platform_device declarations   Tony Lindgren
• [PATCH 9/10] arch/arm/mach-omap2/clock.c: add missing clk_put   Tony Lindgren
• [PATCH] DMA: OMAP: Remove extra looping from omap_request_dma   Tony Lindgren
• [PATCH] ARM: OMAP: Overo: remove duplicate call to overo_ads7846_init()   Tony Lindgren
• [PATCH 2/3] Add tps65921 chip   Tony Lindgren
• [PATCH 1/3] PWM: add pwm framework support   Sascha Hauer
• [PATCH 4/7] ARM: EXYNOS4: Support early wakeup while entering sleep mode   Russell King - ARM Linux
• [GIT PULL] omap iommu fixes for v3.0-rc   Ohad Ben-Cohen
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Huang Shijie
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Wolfram Sang
• [PATCH 2/2] ARM: plat-mxc: Fix pwm frequency   Sascha Hauer
• [PATCH] ARM: mach-mx5/mx53_ard: Add gpio_keys support   Sascha Hauer
• [PATCH] ARM i.MX23/28: platform-mxsfb: Add missing include of linux/dma-mapping.h   Sascha Hauer
• [PATCH 1/3] PWM: add pwm framework support   Ryan Mallon
• [PATCH] ARM: DMA: Add missing semicolon for the define of dma_alloc_area   Axel Lin
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Huang Shijie
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Huang Shijie
• [RFC 0/12] McBSP cleanup and generalization   Jarkko Nikula
• [PATCH 1/3] PWM: add pwm framework support   Sascha Hauer
• reply: [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Huang Shijie
• reply: [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Arnd Bergmann
• [RFC 10/12] omap: mcbsp: Move sidetone clock management to mach-omap2/mcbsp.c   Paul Walmsley
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Arnd Bergmann
• [RFC 10/12] omap: mcbsp: Move sidetone clock management to mach-omap2/mcbsp.c   Cousson, Benoit
• [PATCH 1/5] ASoC: wm8731: rework power management   Nicolas Ferre
• [RFC 10/12] omap: mcbsp: Move sidetone clock management to mach-omap2/mcbsp.c   Paul Walmsley
• [RFC PATCH 0/3] base board consolidation   Uwe Kleine-König
• [RFC PATCH 1/3] ARM: common abstraction for specifying a baseboard   Uwe Kleine-König
• [RFC PATCH 2/3] ARM: imx/mx31moboard: convert to new baseboard handling   Uwe Kleine-König
• [RFC PATCH 3/3] ARM: imx/mx31moboard: remove obsolete baseboard handling   Uwe Kleine-König
• [PATCH] ARMv7: Do not clean the PTE coherent page table walk is supported   Catalin Marinas
• [GIT PULL] omap iommu fixes for v3.0-rc   Tony Lindgren
• Unnecessary cache-line flush on page table updates ?   Catalin Marinas
• [PATCH v3 00/40] ARM: mm: Add generic macros for declaring various CPU structs   Will Deacon
• [PATCH] net/fec: gasket needs to be enabled for some i.mx   Shawn Guo
• [PATCH 1/1] net/fec: iMX53 needs gasket for both MII and RMII   Shawn Guo
• [PATCH for 3.0] AT91: Change nand buswidth logic to match hardware default configuration   Nicolas Ferre
• [RFC 10/12] omap: mcbsp: Move sidetone clock management to mach-omap2/mcbsp.c   ABRAHAM, KISHON VIJAY
• [PATCH] ASoC: wm8731: set the ACTIVE bit if bias ON entered   Nicolas Ferre
• [PATCH] DMA: OMAP: Remove extra looping from omap_request_dma   Scott Ellis
• [RFC 11/12] omap: mcbsp: Remove conditional compilation for OMAP3   Varadarajan, Charulatha
• [RFC 07/12] omap: mcbsp: Get rid of remaining is_omap tests   Varadarajan, Charulatha
• [PATCH] ARM: DMA: Add missing semicolon for the define of dma_alloc_area   Sergei Shtylyov
• [PATCH 0/2] ARM: Samsung: I2C code cleanup   Naveen Krishna Chatradhi
• [PATCH 1/2] ARM: Samsung: Use generic set_plat_data function   Naveen Krishna Chatradhi
• [PATCH 2/2] ARM: Samsung: Cleanup I2C code in plat-samsung   Naveen Krishna Chatradhi
• [PATCH 2/3] Add tps65921 chip   Samuel Ortiz
• [PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver   Dmitry Eremin-Solenikov
• Moving DT data out of the kernel?   Paul Walmsley
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ingo Molnar
• [BUGFIX][PATCH] fix the parent of i2c[12]_clk   Lothar Waßmann
• [PATCH v8 05/12] mmc: mmc_test: add test for non-blocking transfers   Per Forlin
• [PATCH v8 06/12] mmc: mmc_test: test to measure how sg_len affect performance   Per Forlin
• [RFC 10/12] omap: mcbsp: Move sidetone clock management to mach-omap2/mcbsp.c   Jarkko Nikula
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Petr Tesarik
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Christoph Hellwig
• [RFC 11/12] omap: mcbsp: Remove conditional compilation for OMAP3   Jarkko Nikula
• [BUGFIX][PATCH] fix the parent of i2c[12]_clk   Fabio Estevam
• [RFC 07/12] omap: mcbsp: Get rid of remaining is_omap tests   Jarkko Nikula
• [PATCH] ASoC: wm8731: set the ACTIVE bit if bias ON entered   Liam Girdwood
• [PATCH V2] MMC: PM: add suspend/resume in atmel-mci   Nicolas Ferre
• [PATCH V2] MMC: PM: add suspend/resume in atmel-mci   Hans-Christian Egtvedt
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ingo Molnar
• [PATCH] DT: Use helper function to read u32 values   Grant Likely
• [PATCH v8 00/12] use nonblock mmc requests to minimize latency   Linus Walleij
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Christoph Hellwig
• [PATCH V2 2/5] ASoC: atmel-ssc: add phybase in device structure   Nicolas Ferre
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ingo Molnar
• reply: [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Arnd Bergmann
• [PATCH] arm: mxs: add mmc-device for mach-tx28   Wolfram Sang
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Petr Tesarik
• AT91: Fix pull requset   Arnd Bergmann
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Ohad Ben-Cohen
• [PATCH 2/3] Samsung SoC: ready to use NTC value inside kernel   Linus Walleij
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ingo Molnar
• [PATCH 1/8] at91: introduce commom AT91_BASE_SYS   Arnd Bergmann
• [PATCH 2/8] at91: factorize at91 interrupts init to soc   Arnd Bergmann
• [PATCH 3/8] at91: remove AT91_DBGU offset from dbgu register macro   Arnd Bergmann
• [PATCH 8/8] at91: add arch specific ioremap support   Arnd Bergmann
• [PATCH 2/3] Samsung SoC: ready to use NTC value inside kernel   Mark Brown
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   H. Peter Anvin
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ingo Molnar
• [PATCH] ASoC: wm8731: set the ACTIVE bit if bias ON entered   Mark Brown
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH v6 00/18] ARM: Add support for the Large Physical Address Extensions   Catalin Marinas
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH v8 00/12] use nonblock mmc requests to minimize latency   Arnd Bergmann
• [PATCH v9 00/12] use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH v9 01/12] mmc: core: add non-blocking mmc request function   Per Forlin
• [PATCH v9 02/12] omap_hsmmc: add support for pre_req and post_req   Per Forlin
• [PATCH v9 03/12] mmci: implement pre_req() and post_req()   Per Forlin
• [PATCH v9 04/12] mmc: mmc_test: add debugfs file to list all tests   Per Forlin
• [PATCH v9 05/12] mmc: mmc_test: add test for non-blocking transfers   Per Forlin
• [PATCH v9 06/12] mmc: mmc_test: test to measure how sg_len affect performance   Per Forlin
• [PATCH v9 07/12] mmc: block: add member in mmc queue struct to hold request data   Per Forlin
• [PATCH v9 08/12] mmc: block: add a block request prepare function   Per Forlin
• [PATCH v9 09/12] mmc: block: move error code in issue_rw_rq to a separate function.   Per Forlin
• [PATCH v9 10/12] mmc: queue: add a second mmc queue request member   Per Forlin
• [PATCH v9 11/12] mmc: core: add random fault injection   Per Forlin
• [PATCH v9 12/12] mmc: block: add handling for two parallel block requests in issue_rw_rq   Per Forlin
• [PATCH 2/3] Samsung SoC: ready to use NTC value inside kernel   Arnd Bergmann
• [PATCH 1/8] at91: introduce commom AT91_BASE_SYS   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/8] at91: factorize at91 interrupts init to soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 8/8] at91: add arch specific ioremap support   Jean-Christophe PLAGNIOL-VILLARD
• Please submit platform trees for inclusion in arm-soc.git v3.1   Arnd Bergmann
• AT91: Fix pull requset   Uwe Kleine-König
• [PATCH 2/2] ARM: plat-mxc: Fix pwm frequency   Troy Kisky
• plat-orion multi purpose pins problem for mv78200   Joey Oravec
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Petr Tesarik
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ingo Molnar
• [PATCH 2/3] Samsung SoC: ready to use NTC value inside kernel   Mark Brown
• [PATCH v2 0/5] OMAP4: PM HW bugs & PRCM fixes   Benoit Cousson
• [PATCH v2 1/5] OMAP4: prcm: Fix errors in few defines name   Benoit Cousson
• [PATCH v2 2/5] OMAP4: prm: Remove wrong clockdomain offsets   Benoit Cousson
• [PATCH v2 3/5] OMAP4: powerdomain data: Fix core mem states and missing cefuse flag   Benoit Cousson
• [PATCH v2 4/5] OMAP4: clock data: Keep GPMC clocks always enabled and hardware managed   Benoit Cousson
• [PATCH v2 5/5] OMAP4: powerdomain data: Remove unsupported MPU powerdomain state   Benoit Cousson
• [PATCH 1/8] at91: introduce commom AT91_BASE_SYS   Arnd Bergmann
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Benoit Cousson
• [PATCH v2 01/18] OMAP4: cm: Remove RESTORE macros to avoid access from SW   Benoit Cousson
• [PATCH v2 02/18] OMAP4: prcm_mpu: Fix indent in few macros   Benoit Cousson
• [PATCH v2 03/18] OMAP4: clockdomain data: Fix data order and wrong name   Benoit Cousson
• [PATCH v2 04/18] OMAP4: clock data: Add sddiv to USB DPLL   Benoit Cousson
• [PATCH v2 05/18] OMAP4: clock data: Remove usb_host_fs clkdev with NULL dev   Benoit Cousson
• [PATCH v2 06/18] OMAP4: clock data: Re-order some clock nodes and structure fields   Benoit Cousson
• [PATCH v2 07/18] OMAP4: clock data: Fix max mult and div for USB DPLL   Benoit Cousson
• [PATCH v2 08/18] OMAP4: clock data: Rename clock flags from 443X to 44XX   Benoit Cousson
• [PATCH v2 09/18] OMAP4: clock data: Remove McASP2, McASP3 and MMC6 clocks   Benoit Cousson
• [PATCH v2 10/18] OMAP4: clock data: Remove UNIPRO clock nodes   Benoit Cousson
• [PATCH v2 11/18] OMAP4: clock data: Add missing divider selection for auxclks   Benoit Cousson
• [PATCH v2 12/18] OMAP4: prcm: Remove references to non-existant peripherals   Benoit Cousson
• [PATCH v2 13/18] OMAP4: hwmod data: Fix L3 interconnect data order and alignement   Benoit Cousson
• [PATCH v2 14/18] OMAP4: hwmod data: Remove un-needed parens   Benoit Cousson
• [PATCH v2 15/18] OMAP4: hwmod data: Fix bad alignement   Benoit Cousson
• [PATCH v2 16/18] OMAP4: hwmod data: Replace CHIP_IS_OMAP4430 by OMAP44XX   Benoit Cousson
• [PATCH v2 17/18] OMAP4: hwmod data: Modify DSS opt clocks   Benoit Cousson
• [PATCH v2 18/18] OMAP4: hwmod data: Change DSS main_clk scheme   Benoit Cousson
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Petr Tesarik
• [PATCH v2 0/8] OMAP2+: hwmod framework fixes   Benoit Cousson
• [PATCH v2 1/8] OMAP2+: hwmod: Fix smart-standby + wakeup support   Benoit Cousson
• [PATCH v2 2/8] OMAP4: hwmod data: Add MSTANDBY_SMART_WKUP flag   Benoit Cousson
• [PATCH v2 3/8] OMAP2+: hwmod: Enable module in shutdown to access sysconfig   Benoit Cousson
• [PATCH v2 4/8] OMAP2+: hwmod: Do not write the enawakeup bit if SYSC_HAS_ENAWAKEUP is not set   Benoit Cousson
• [PATCH v2 5/8] OMAP2+: hwmod: Remove _populate_mpu_rt_base warning   Benoit Cousson
• [PATCH v2 6/8] OMAP2+: hwmod: Fix the HW reset management   Benoit Cousson
• [PATCH v2 7/8] OMAP: hwmod: Add warnings if enable failed   Benoit Cousson
• [PATCH v2 8/8] OMAP: hwmod: Move pr_debug to improve the readability   Benoit Cousson
• [PATCH v3 00/13] OMAP4: Add modulemode support to hwmod framework   Benoit Cousson
• [PATCH v3 01/13] OMAP4: hwmod data: Add clock domain attribute   Benoit Cousson
• [PATCH v3 02/13] OMAP2+: hwmod: Init clkdm field at boot time   Benoit Cousson
• [PATCH v3 03/13] OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros   Benoit Cousson
• [PATCH] OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros   Benoit Cousson
• [PATCH] OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros   Benoit Cousson
• [PATCH v3 04/13] OMAP: hwmod: Wait the idle status to be disabled   Benoit Cousson
• [PATCH v3 05/13] OMAP2+: hwmod: Replace clkdm access from main_clk using hwmod attribute   Benoit Cousson
• [PATCH v3 06/13] OMAP4: hwmod: Replace RSTCTRL absolute address with offset macros   Benoit Cousson
• [PATCH v3 07/13] OMAP4: prm: Replace warm reset API with the offset based version   Benoit Cousson
• [PATCH v3 08/13] OMAP4: prm: Remove deprecated functions   Benoit Cousson
• [PATCH v3 09/13] OMAP4: hwmod data: Align interconnect format with regular modules   Benoit Cousson
• [PATCH v3 10/13] OMAP4: hwmod data: Add PRM context register offset   Benoit Cousson
• [PATCH v4] Add ARM cpu topology definition   Russell King - ARM Linux
• [PATCH v3 11/13] OMAP4: hwmod data: Add modulemode entry in omap_hwmod structure   Benoit Cousson
• [PATCH v3 12/13] OMAP4: cm: Add two new APIs for modulemode control   Benoit Cousson
• [PATCH v3 13/13] OMAP4: hwmod: Introduce the module control in hwmod control   Benoit Cousson
• [PATCH v2] OMAP: omap_device: Create clkdev entry for hwmod main_clk   Benoit Cousson
• [PATCH V2 3/8] ARM: EXYNOS4: Add support PM with external GIC   Russell King - ARM Linux
• [PATCH v4 0/7] Fix module-mode enable sequence on OMAP4   Benoit Cousson
• [PATCH v4 1/7] OMAP2+: clockdomain: Add an api to read idle mode   Benoit Cousson
• [PATCH v4 2/7] OMAP2+: clockdomain: Add SoC support for clkdm_allows_idle   Benoit Cousson
• [PATCH v4 3/7] OMAP2+: PM: Initialise sleep_switch to a non-valid value   Benoit Cousson
• [PATCH v4 4/7] OMAP2+: PM: idle clkdms only if already in idle   Benoit Cousson
• [PATCH v4 5/7] OMAP2+: clockdomain: Add 2 APIs to control clockdomain from hwmod framework   Benoit Cousson
• [PATCH v4 6/7] OMAP2+: clockdomain: Add per clkdm lock to prevent concurrent state programming   Benoit Cousson
• [PATCH v4 7/7] OMAP2+: hwmod: Follow the recommended PRCM module enable sequence   Benoit Cousson
• Unnecessary cache-line flush on page table updates ?   heechul Yun
• [PATCH v2 0/4] OMAP4: Add modulemode support to hwmod framework (part 2)   Benoit Cousson
• [PATCH v2 1/4] OMAP4: hwmod data: Add GPMC   Benoit Cousson
• [PATCH v2 2/4] OMAP4: hwmod data: Replace main_clk with the real input clock   Benoit Cousson
• [PATCH v2 3/4] OMAP4: clock data: Remove leaf clock nodes   Benoit Cousson
• [PATCH v2 4/4] OMAP4: prcm: Remove macros with absolute address   Benoit Cousson
• plat-orion multi purpose pins problem for mv78200   Joey Oravec
• [PATCH v4 0/4] Extend sdhci-esdhc-imx card_detect and write_protect support for mx5   Chris Ball
• [PATCH 1/3] PWM: add pwm framework support   Ryan Mallon
• [PATCH v2 0/6] OMAP4: Add 4460 base support   Rajendra Nayak
• [PATCH v2 1/6] OMAP: ID: introduce chip detection for OMAP4460   Rajendra Nayak
• [PATCH v2 2/6] OMAP4: ID: add omap_has_feature for max freq supported   Rajendra Nayak
• [PATCH v2 3/6] OMAP4: PRCM: OMAP4460 specific PRM and CM register bitshifts   Rajendra Nayak
• [PATCH v2 4/6] OMAP4: clocks: Update the clock tree with 4460 clock nodes   Rajendra Nayak
• [PATCH v2 5/6] OMAP4: powerdomain: Reuse on 4460 using CHIP_IS_44XX   Rajendra Nayak
• [PATCH v2 6/6] OMAP4: clockdomain: Reuse on 4460 using CHIP_IS_44XX   Rajendra Nayak
• [PATCH 0/7] OMAP: hwmod: consolidate duplicate data across OMAP2xxx/3xxx files   Paul Walmsley
• [PATCH 2/7] omap_hwmod: share identical omap_hwmod_addr_space arrays   Paul Walmsley
• [PATCH 4/7] omap_hwmod: share identical omap_hwmod_mpu_irqs arrays   Paul Walmsley
• [PATCH 5/7] omap_hwmod: use a terminator record with omap_hwmod_dma_info arrays   Paul Walmsley
• [PATCH 6/7] omap_hwmod: share identical omap_hwmod_dma_info arrays   Paul Walmsley
• [PATCH 7/7] omap_hwmod: share identical omap_hwmod_class, omap_hwmod_class_sysconfig arrays   Paul Walmsley
• [PATCH v2 17/18] OMAP4: hwmod data: Modify DSS opt clocks   Tomi Valkeinen
• [PATCH 5/6] ARM: convert PCI defines to variables   Arnd Bergmann
• [PATCH v2 0/6] ARM: make mach/hardware.h optional   Arnd Bergmann
• [PATCH v2 17/18] OMAP4: hwmod data: Modify DSS opt clocks   Tomi Valkeinen
• [PATCH] AT91: add AT91SAM9X5 dummy configuration variable   Arnd Bergmann
• [PATCH 0/2 v4] OMAP2+: hwmod: Add hwmod's API's for pad wakeup   Govindraj.R
• [PATCH 1/2 v4] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Govindraj.R
• [PATCH 2/2 v4] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Govindraj.R
• [PATCH v6 00/18] ARM: Add support for the Large Physical Address Extensions   Russell King - ARM Linux
• plat-orion multi purpose pins problem for mv78200   Simon Guinot
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [PATCH v8 00/12] use nonblock mmc requests to minimize latency   Russell King - ARM Linux
• [PATCH] genirq: replace irq_gc_ack with {set,clr}_bit variants   Simon Guinot
• [PATCH 5/6] ARM: convert PCI defines to variables   Rob Herring
• [PATCH V2 0/2] Suspend for gpio-vbus support   Dmitry Eremin-Solenikov
• [PATCH V2 1/2] gpio-vbus: support disabling D+ pullup on suspend   Dmitry Eremin-Solenikov
• [PATCH V2 2/2] mioa701: move gpio-pullup functionality to gpio-vbus   Dmitry Eremin-Solenikov
• [PATCH 2/2 v4] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Paul Walmsley
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH v8 00/12] use nonblock mmc requests to minimize latency   Arnd Bergmann
• [PATCH 5/6] ARM: convert PCI defines to variables   Arnd Bergmann
• [PATCH] OMAP: hwmod: add kernel cmdline flag to avoid resetting IP blocks during init   Paul Walmsley
• AT91: Fix pull requset   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/2] Add device tree probe support for tty/serial/imx   Shawn Guo
• [PATCH 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Shawn Guo
• [PATCH 2/2] serial/imx: add device tree probe support   Shawn Guo
• [PATCH] net/fec: add device tree probe support   Shawn Guo
• [PATCH 0/2] Add device tree probe for imx/mxc gpio   Shawn Guo
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Shawn Guo
• [PATCH 2/2] gpio/mxc: add device tree probe support   Shawn Guo
• [PATCH 0/3] Add device tree probe for sdhci-esdhc-imx   Shawn Guo
• [PATCH 1/3] mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()   Shawn Guo
• [PATCH 2/3] mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host   Shawn Guo
• [PATCH 3/3] mmc: sdhci-esdhc-imx: add device tree probe support   Shawn Guo
• [PATCH] genirq: replace irq_gc_ack with {set,clr}_bit variants   saeed bishara
• [PATCH V2 0/2] Suspend for gpio-vbus support   Sergei Shtylyov
• plat-orion multi purpose pins problem for mv78200   saeed bishara
• [PATCH v6 00/11] mmc: use nonblock mmc requests to minimize latency   Russell King - ARM Linux
• [PATCH 1/8] ARM: dma-mapping: remove offset parameter to prepare for generic dma_ops   Russell King - ARM Linux
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Ingo Molnar
• [PATCH v8 00/12] use nonblock mmc requests to minimize latency   Per Forlin
• [PATCH 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Grant Likely
• [PATCH 2/2] serial/imx: add device tree probe support   Grant Likely
• [PATCH] net/fec: add device tree probe support   Grant Likely
• [PATCH V2 0/2] Suspend for gpio-vbus support   Dmitry Eremin-Solenikov
• [PATCH V3 0/2] Suspend for gpio-vbus   Dmitry Eremin-Solenikov
• [PATCH V3 1/2] gpio-vbus: support disabling D+ pullup on suspend   Dmitry Eremin-Solenikov
• [PATCH V3 2/2] mioa701: move gpio-pullup functionality to gpio-vbus   Dmitry Eremin-Solenikov
• [RFC 04/12] omap: mcbsp: Merge OMAP1 and OMAP2+ McBSP register definitions   Janusz Krzysztofik
• [PATCH v8 00/12] use nonblock mmc requests to minimize latency   Nicolas Pitre
• [PATCH 0/6+1] ARM: EXYNOS4: SYSMMU: Improvements on SYSMMU driver   KyongHo Cho
• [PATCH 1/6] ARM: EXYNOS4: SYSMMU: Remove SYSMMU_MDMA2   KyongHo Cho
• [PATCH 2/6] ARM: EXYNOS4: SYSMMU: Enable clock gating for System MMU of SSS   KyongHo Cho
• [PATCH 3/6] ARM: EXYNOS4: SYSMMU: Enhancement on device definition   KyongHo Cho
• [PATCH 4/6] ARM: EXYNOS4: SYSMMU: add devname in SYSMMU clock to support clkdev.   KyongHo Cho
• [PATCH 5/6] ARM: EXYNOS4: SYSMMU: Add SYSMMU_NONE   KyongHo Cho
• [PATCH 6/6] ARM: EXYNOS4: SYSMMU: Move clock gating functions to SYSMMU device driver.   KyongHo Cho
• [PATCH] ARM: EXYNOS4: iommu: Add IOMMU API and moved to drivers/iommu   KyongHo Cho
• [PATCH 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Shawn Guo
• [PATCH 2/2] serial/imx: add device tree probe support   Shawn Guo
• [rtc-linux] [PATCH 2/3] rtc: rtc-s3c: Disable alarm entries that are not chosen.   Changhwan Youn
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH 3/3] rtc: rtc-s3c: allow multiple open / allow no-ioctl-open'ed rtc to have irq.   Changhwan Youn
• [REPOST PATCH 1/2 v4] OMAP2+: hwmod: Add API to enable IO ring wakeup.   Govindraj.R
• [rtc-linux] [PATCH 2/3] rtc: rtc-s3c: Disable alarm entries that are not chosen.   MyungJoo Ham
• [REPOST PATCH 2/2 v4] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Govindraj.R
• [PATCH 3/3] rtc: rtc-s3c: allow multiple open / allow no-ioctl-open'ed rtc to have irq.   MyungJoo Ham
• [REPOST PATCH 2/2 v4] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Govindraj.R
• [PATCH 2/2 v4] OMAP2+: hwmod: Add API to check IO PAD wakeup status   Govindraj
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Ankita Garg
• [PATCH 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Grant Likely
• [PATCH] net/fec: add device tree probe support   Shawn Guo
• [PATCH] net/fec: add device tree probe support   Grant Likely
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Grant Likely
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Grant Likely
• [PATCH 2/2] gpio/mxc: add device tree probe support   Grant Likely
• [PATCH 1/3] mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()   Grant Likely
• [PATCH 2/3] mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host   Grant Likely
• [PATCH] net/fec: add device tree probe support   Shawn Guo
• [PATCH 3/3] mmc: sdhci-esdhc-imx: add device tree probe support   Grant Likely
• [PATCH] net/fec: add device tree probe support   Grant Likely
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Sascha Hauer
• [PATCH 0/6+1] ARM: EXYNOS4: SYSMMU: Improvements on SYSMMU driver   Marek Szyprowski
• [PATCH 2/3] Add tps65921 chip   Tony Lindgren
• [PATCH v4] Add ARM cpu topology definition   Vincent Guittot
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Grant Likely
• [PATCH] net/fec: gasket needs to be enabled for some i.mx   Sascha Hauer
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Grant Likely
• [PATCH 2/2] serial/imx: add device tree probe support   Sascha Hauer
• ASoC: imx dma tx burst size set to 6 and to 4 ?   Sascha Hauer
• [PATCH 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Uwe Kleine-König
• [PATCH 2/2] serial/imx: add device tree probe support   Uwe Kleine-König
• [PATCH 1/1] ARM: mxc: Fix gpio interrupts for mx53   Sascha Hauer
• GIT PULL: i.MX fixes for -rc   Sascha Hauer
• [PATCH 1/3] PWM: add pwm framework support   Sascha Hauer
• ASoC: imx dma tx burst size set to 6 and to 4 ?   javier Martin
• [PATCH] ARM: DMA: Add missing semicolon for the define of dma_alloc_area   Axel Lin
• [PATCH] ARM: DMA: Silence declared inside parameter list warning for !CONFIG_MMU   Axel Lin
• [RFC PATCH 0/3] base board consolidation   Philippe Rétornaz
• ASoC: imx dma tx burst size set to 6 and to 4 ?   Sascha Hauer
• [RFC PATCH 0/3] base board consolidation   Russell King - ARM Linux
• [PATCH 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Shawn Guo
• [PATCH 00/10] dmabounce cleanups   Russell King - ARM Linux
• [PATCH 01/10] ARM: dmabounce: fix map_single() error return value   Russell King - ARM Linux
• [PATCH 02/10] ARM: dma-mapping: define dma_(un)?map_single in terms of dma_(un)?map_page   Russell King - ARM Linux
• [PATCH 03/10] ARM: dmabounce: avoid needless valid_dma_direction() check   Russell King - ARM Linux
• [PATCH 04/10] ARM: dmabounce: separate out decision to bounce   Russell King - ARM Linux
• [PATCH 05/10] ARM: dmabounce: move decision for bouncing into __dma_map_page()   Russell King - ARM Linux
• [PATCH 06/10] ARM: dmabounce: remove useless pr_err   Russell King - ARM Linux
• [PATCH 07/10] ARM: dmabounce: check pointer against NULL not 0   Russell King - ARM Linux
• [PATCH 1/3] PWM: add pwm framework support   Dmitry Eremin-Solenikov
• [PATCH 08/10] ARM: dmabounce: correct unmap_single dev_dbg   Russell King - ARM Linux
• [PATCH 09/10] ARM: dmabounce: get rid of dma_needs_bounce global function   Russell King - ARM Linux
• [PATCH 10/10] ARM: dmabounce: no need to check dev->bus type in needs_bounce function   Russell King - ARM Linux
• [PATCH] OMAP: hwmod: add kernel cmdline flag to avoid resetting IP blocks during init   Tony Lindgren
• [PATCH 2/2] serial/imx: add device tree probe support   Shawn Guo
• [PATCH 2/2] serial/imx: add device tree probe support   Uwe Kleine-König
• [PATCH 2/8] at91: factorize at91 interrupts init to soc   Christian Glindkamp
• [PATCH] arm: fix regression in ixp4xx clocksource   Thomas Gleixner
• [PATCH] AT91: add AT91SAM9X5 dummy configuration variable   Nicolas Ferre
• [PATCH V4 0/4] pxa3xx_nand: add two chip select support   Lei Wen
• [PATCH 1/4] MTD: pxa3xx_nand: convert all printk into dev_*   Lei Wen
• [PATCH 2/4] MTD: pxa3xx_nand: sperate each chip individual info   Lei Wen
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH 4/4] ARM: mmp/pxa: fix nand platform data   Lei Wen
• [PATCH V3 0/9] pxa3xx_nand: add two chip select support   Lei Wen
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Shawn Guo
• [PATCH 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Uwe Kleine-König
• [PATCH RESEND] arm: mach-vt8500: add forgotten irq_data conversion   Wolfram Sang
• [PATCH V2 3/8] ARM: EXYNOS4: Add support PM with external GIC   Kukjin Kim
• [PATCH for 3.0] AT91: Change nand buswidth logic to match hardware default configuration   Nicolas Ferre
• [PATCH 4/7] ARM: GIC: move gic_chip_data structure declaration to header   Kukjin Kim
• [PATCH 4/7] ARM: EXYNOS4: Support early wakeup while entering sleep mode   Kukjin Kim
• Unnecessary cache-line flush on page table updates ?   Catalin Marinas
• [PATCH] ASoC: wm8731: set the ACTIVE bit if bias ON entered   Nicolas Ferre
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Sascha Hauer
• [PATCH 4/7] ARM: EXYNOS4: Support early wakeup while entering sleep mode   Russell King - ARM Linux
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Kukjin Kim
• Unnecessary cache-line flush on page table updates ?   Russell King - ARM Linux
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   padma venkat
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Kukjin Kim
• [PATCH] arm: exynos4: address a section mismatch w/ suspend issue.   Kukjin Kim
• [RFC PATCH 0/3] base board consolidation   Daniel Mack
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Shawn Guo
• [PATCH 1/7] ARM: EXYNOS4: Add external GIC io memory mapping   Kukjin Kim
• [PATCH 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Shawn Guo
• [PATCH] GPIO: SAMSUNG: Consolidate GPIO library for SAMSUNG SoC   Chanwoo Choi
• [RFC PATCH 0/3] base board consolidation   Russell King - ARM Linux
• [PATCH 1/3] PWM: add pwm framework support   Ryan Mallon
• Unnecessary cache-line flush on page table updates ?   Catalin Marinas
• [PATCH V3] MMC: PM: add suspend/resume in atmel-mci   Felipe Balbi
• Unnecessary cache-line flush on page table updates ?   Russell King - ARM Linux
• [PATCH V3] MMC: PM: add suspend/resume in atmel-mci   Nicolas Ferre
• [RFC PATCH 0/3] base board consolidation   Marek Vasut
• [PATCH 0/7] ARM: S5P: Use generic DMA APIs   Kukjin Kim
• [PATCH 1/7] DMA: PL330: Add support runtime PM for PL330 DMAC   Kukjin Kim
• [PATCH 2/7] DMA: PL330: Update PL330 DMA API driver   Kukjin Kim
• [PATCH 3/7] DMA: PL330: Add DMA capabilities   Kukjin Kim
• [PATCH 4/7] ARM: SAMSUNG: Update to use PL330-DMA driver   Kukjin Kim
• [PATCH 5/7] ARM: EXYNOS4: Use generic DMA PL330 driver   Kukjin Kim
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Kukjin Kim
• [PATCH 7/7] ASoC: Samsung: Update DMA interface   Kukjin Kim
• [PATCH] ARM:SAMSUNG: DMA Cleanup as per sparse   Kukjin Kim
• [RFC PATCH 0/3] base board consolidation   Russell King - ARM Linux
• [PATCH 1/3] PWM: add pwm framework support   Sascha Hauer
• [PATCH V3] MMC: PM: add suspend/resume in atmel-mci   Nicolas Ferre
• [RFC PATCH] MTD: atmel_nand: optimize read/write buffer functions   Nicolas Ferre
• Unnecessary cache-line flush on page table updates ?   Russell King - ARM Linux
• [PATCH v2] davinci: da850 EVM: read mac address from SPI flash   Rajashekhara, Sudhakar
• Unnecessary cache-line flush on page table updates ?   Catalin Marinas
• Spurious wakeup calls on Offlined CPU   Virupax SADASHIVPETIMATH
• [PATCH] arm: mxs: add mmc-device for mach-tx28   Lothar Waßmann
• [BUGFIX][PATCH] fix the parent of i2c[12]_clk   Lothar Waßmann
• [BUGFIX][PATCH] mach-mx5: fix the I2C clock parents   Lothar Waßmann
• [PATCH 1/3] PWM: add pwm framework support   Arnd Bergmann
• [PATCH 1/3] PWM: add pwm framework support   Arnd Bergmann
• [PATCH 3/5] arch/arm/mach-omap2/smartreflex.c: add missing error-handling code   Julia Lawall
• [PATCH v2] DT: Use helper function to read u32 values   Manjunatha GK
• [PATCH V2] MTD: atmel_nand: optimize read/write buffer functions   Nicolas Ferre
• [PATCH for 3.0] AT91: Change nand buswidth logic to match hardware default configuration   Arnd Bergmann
• [PATCH v2] genirq: replace irq_gc_ack() with {set,clr}_bit variants   Simon Guinot
• [PATCH for 3.0] AT91: Change nand buswidth logic to match hardware default configuration   Nicolas Ferre
• [Linaro-mm-sig] [PATCH 08/10] mm: cma: Contiguous Memory Allocator added   Arnd Bergmann
• [PATCH v2] genirq: replace irq_gc_ack() with {set, clr}_bit variants   Nicolas Pitre
• [BUGFIX][PATCH] mach-mx5: fix the I2C clock parents   Sergei Shtylyov
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Grant Likely
• Unnecessary cache-line flush on page table updates ?   heechul Yun
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Grant Likely
• [PATCH for 3.0] AT91: Change nand buswidth logic to match hardware default configuration   Arnd Bergmann
• [PATCH for 3.0] AT91: Change nand buswidth logic to match hardware default configuration   Nicolas Ferre
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Grant Likely
• mx25 gpt-clock issue, waits are too long   Mehnert, Torsten
• [PATCH 2/2] serial/imx: add device tree probe support   Grant Likely
• [PATCH 1/1] ARM: mxc: Fix gpio interrupts for mx53   Grant Likely
• Unnecessary cache-line flush on page table updates ?   Catalin Marinas
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Grant Likely
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Sascha Hauer
• [PATCH 0/5] remove spi-s3c24xx-gpio driver   Grant Likely
• [PATCH v5] Add ARM cpu topology definition   Vincent Guittot
• [PATCH 0/5] remove spi-s3c24xx-gpio driver   Grant Likely
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Mark Brown
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Shawn Guo
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Heiko Stübner
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Grant Likely
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Grant Likely
• [PATCH 7/7] ASoC: Samsung: Update DMA interface   Mark Brown
• function tracer on i.mx35 (pcm043)   Tim Sander
• [PATCH v6 00/18] ARM: Add support for the Large Physical Address Extensions   Catalin Marinas
• [PATCH] ASoC: Manage WM8731 ACTIVE bit as a supply widget   Mark Brown
• [PATCH] ASoC: wm8731: set the ACTIVE bit if bias ON entered   Mark Brown
• [PATCH] ASoC: wm8731: set the ACTIVE bit if bias ON entered   Liam Girdwood
• [PATCH 1/2] ARM: SAMSUNG: Add tx_st_done variable in the   Padmavathi Venna
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Padmavathi Venna
• [PATCH] ARM: S5PC100: Fix for compilation error   Padmavathi Venna
• [PATCH] ARM: SAMSUNG: Added SPI machine support   Padmavathi Venna
• [PATCH 1/2] SPI: S5PC100: Enable the SPI driver for S5PC100   Padmavathi Venna
• [PATCH 2/2] SPI: S5PV210: Enable the SPI driver for S5PV210   Padmavathi Venna
• Ooops with 2.6.39.2 on pxa270   Vasily Khoruzhick
• Future of S3C6410 platform   Tomasz Figa
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Heiko Stübner
• Unnecessary cache-line flush on page table updates ?   Russell King - ARM Linux
• what about mach-shark?   Nicolas Pitre
• [PATCH v3] ARM: l2x0: Add OF based initialization   Rob Herring
• Future of S3C6410 platform   Arnd Bergmann
• [PATCH v2] ARM: kirkwood: Add support for Buffalo LS-XHL   Michael Walle
• Unnecessary cache-line flush on page table updates ?   heechul Yun
• Future of S3C6410 platform   Ben Dooks
• [GIT PULL] arm soc tree, at91 patches for 3.0   Arnd Bergmann
• Unnecessary cache-line flush on page table updates ?   Russell King - ARM Linux
• what about mach-shark?   Russell King - ARM Linux
• what about mach-shark?   Nicolas Pitre
• what about mach-shark?   Russell King - ARM Linux
• Future of S3C6410 platform   Tomasz Figa
• Unnecessary cache-line flush on page table updates ?   Russell King - ARM Linux
• Future of S3C6410 platform   Russell King - ARM Linux
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Grant Likely
• [PATCH 0/6+1] ARM: EXYNOS4: SYSMMU: Improvements on SYSMMU driver   KyongHo Cho
• Future of S3C6410 platform   Tomasz Figa
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• what about mach-shark?   Nicolas Pitre
• [PATCH v3] ARM: l2x0: Add OF based initialization   Barry Song
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Shawn Guo
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Grant Likely
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Shawn Guo
• [PATCH v3] ARM: l2x0: Add OF based initialization   Grant Likely
• [RFC/RFT 0/2] gpio: move tnetv107x gpio support to drivers/gpio   Sekhar Nori
• [RFC 5/8] remoteproc: add davinci implementation   Nori, Sekhar
• [PATCH] AT91: add AT91SAM9X5 dummy configuration variable   Jean-Christophe PLAGNIOL-VILLARD
• [RFC 5/8] remoteproc: add davinci implementation   Nori, Sekhar
• [PATCH 2/8] at91: factorize at91 interrupts init to soc   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 0/5] remove spi-s3c24xx-gpio driver   Kukjin Kim
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Kukjin Kim
• [PATCH 5/7] ARM: EXYNOS4: Use generic DMA PL330 driver   Alim Akhtar
• [PATCH 1/7] DMA: PL330: Add support runtime PM for PL330 DMAC   Alim Akhtar
• [RFC/RFT 1/2] gpio/basic_mmio: add support for enable register   Ryan Mallon
• [PATCH 3/7] DMA: PL330: Add DMA capabilities   Chanho Park
• [PATCH v2] arm: mach-mmp: brownstone.c support multiple sd slots   Eric Miao
• [PATCH v2] ARM: PXA: Z2: Add poweroff function   Eric Miao
• [PATCH v2] arm: mach-mmp: brownstone.c support multiple sd slots   zhangfei gao
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Kukjin Kim
• [PATCH 3/7] DMA: PL330: Add DMA capabilities   Kukjin Kim
• [PATCH 9/9] ARM: mmp: enable max7312 gpio expander in dkb   Eric Miao
• [PATCH 7/7] ASoC: Samsung: Update DMA interface   Kukjin Kim
• [PATCH v2] arm: mach-mmp: brownstone.c support multiple sd slots   Eric Miao
• [PATCH 1/7] DMA: PL330: Add support runtime PM for PL330 DMAC   Kukjin Kim
• [PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver   Eric Miao
• [PATCH 2/7] DMA: PL330: Update PL330 DMA API driver   Russell King - ARM Linux
• [PATCH 1/3] ARM: pxa: enable pxa95x interrupt handler   Eric Miao
• [PATCH 2/3] ARM: mmp: enable one wire controller in ttc dkb   Eric Miao
• [PATCHv11 0/8] Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 1/8] mm: move some functions from memory_hotplug.c to page_isolation.c   Marek Szyprowski
• [PATCH 2/8] mm: alloc_contig_freed_pages() added   Marek Szyprowski
• [PATCH 3/8] mm: alloc_contig_range() added   Marek Szyprowski
• [PATCH 4/8] mm: MIGRATE_CMA migration type added   Marek Szyprowski
• [PATCH 5/8] mm: MIGRATE_CMA isolation functions added   Marek Szyprowski
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 7/8] ARM: integrate CMA with dma-mapping subsystem   Marek Szyprowski
• [PATCH 8/8] ARM: S5PV210: example of CMA private area for FIMC device on Goni board   Marek Szyprowski
• [PATCH] pxa/magician: use gpio arrays for backlight and lcd power init   Eric Miao
• [PATCH 7/7] ASoC: Samsung: Update DMA interface   Seungwhan Youn
• [PATCH] pxa/magician: fix MAGICIAN_EGPIO_BASE, align with NR_BUILTIN_GPIO   Eric Miao
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Russell King - ARM Linux
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Russell King - ARM Linux
• [PATCH v3] pxa/hx4700: use gpio arrays for global gpio initialization   Eric Miao
• [PATCH v3] pxa/mioa701: use gpio arrays for global and gsm gpio initialization   Eric Miao
• [PATCH v3] pxa/magician: use gpio arrays for backlight and global gpio initialization   Eric Miao
• [PATCH] ASoC: wm8731: set the ACTIVE bit if bias ON entered   Nicolas Ferre
• [PATCH 1/7] DMA: PL330: Add support runtime PM for PL330 DMAC   Russell King - ARM Linux
• [PATCH 3/7] DMA: PL330: Add DMA capabilities   Chanho Park
• [PATCH 5/7] ARM: EXYNOS4: Use generic DMA PL330 driver   Sangwook Lee
• [RFC/RFT 1/2] gpio/basic_mmio: add support for enable register   Nori, Sekhar
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Chanho Park
• [PATCH v8 00/14] Consolidating GIC per-cpu interrupts   Marc Zyngier
• [PATCH v8 01/14] ARM: gic: add per-cpu interrupt mapping   Marc Zyngier
• [PATCH v8 02/14] ARM: smp: add interrupt handler for local timers   Marc Zyngier
• [PATCH v8 03/14] ARM: smp_twd: add support for remapped PPI interrupts   Marc Zyngier
• [PATCH v8 04/14] ARM: omap4: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v8 05/14] ARM: versatile: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v8 06/14] ARM: shmobile: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v8 07/14] ARM: ux500: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v8 08/14] ARM: tegra: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v8 09/14] ARM: msm: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v8 10/14] ARM: exynos4: use remapped PPI interrupts for local timer   Marc Zyngier
• [PATCH v8 11/14] ARM: gic: remove previous local timer interrupt handling   Marc Zyngier
• [PATCH v8 12/14] ARM: gic: add compute_irqnr macro for exynos4   Marc Zyngier
• [PATCH v8 13/14] ARM: SMP: automatically select ARM_GIC_PPI_MAP   Marc Zyngier
• [PATCH v8 14/14] ARM: gic: add gic_ppi_map_on_cpu()   Marc Zyngier
• [PATCH] pxa/hx4700: Avoid unbalanced irq wakeup enables/disables   Eric Miao
• [PATCH 1/3] ohci-at91: add vbus_pin_inverted platform attribute   Thomas Petazzoni
• [PATCH 2/3] at91-ohci: support overcurrent notification   Thomas Petazzoni
• [PATCH 3/3] at91-ohci: configure overcurrent pins as GPIOs   Thomas Petazzoni
• Unnecessary cache-line flush on page table updates ?   Catalin Marinas
• Unnecessary cache-line flush on page table updates ?   Russell King - ARM Linux
• function tracer on i.mx35 (pcm043)   Russell King - ARM Linux
• [PATCH] pxa/magician: fix MAGICIAN_EGPIO_BASE, align with NR_BUILTIN_GPIO   Russell King - ARM Linux
• [PATCH 1/2] SPI: S5PC100: Enable the SPI driver for S5PC100   Russell King - ARM Linux
• [PATCH] ARM: mxs/tx28: according to the TX28's datasheet D4-D7 are not used for MMC0   Uwe Kleine-König
• Unnecessary cache-line flush on page table updates ?   Catalin Marinas
• [PATCH 2/3] at91-ohci: support overcurrent notification   Matthieu CASTET
• [PATCH 2/3] at91-ohci: support overcurrent notification   Thomas Petazzoni
• Ooops with 2.6.39.2 on pxa270   Russell King - ARM Linux
• [GIT PULL] non-critical omap fixes for v3.1 merge window   Tony Lindgren
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 1/6] microblaze: move pci flag functions into asm-generic   Michal Simek
• Unnecessary cache-line flush on page table updates ?   Russell King - ARM Linux
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Heiko Stübner
• [PATCH 6/8 RESEND] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH 0/6+1] ARM: EXYNOS4: SYSMMU: Improvements on SYSMMU driver   Marek Szyprowski
• [PATCH 1/4] mmci: use StartBitErr to detect bad connections   Russell King - ARM Linux
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Jassi Brar
• [PATCH 2/4] mmci: adjust calculation of f_min   Russell King - ARM Linux
• [PATCH 0/2] ARM: Samsung: I2C code cleanup   Naveen Krishna Ch
• [PATCH 3/4] mmci: sync DATAEND irq with dma|pio transfer done   Russell King - ARM Linux
• [PATCH] AT91: add AT91SAM9X5 dummy configuration variable   Arnd Bergmann
• [PATCH 1/8] mm: move some functions from memory_hotplug.c to page_isolation.c   Arnd Bergmann
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Russell King - ARM Linux
• [PATCH 2/8] mm: alloc_contig_freed_pages() added   Arnd Bergmann
• [PATCH 3/8] mm: alloc_contig_range() added   Arnd Bergmann
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCH 1/3] ohci-at91: add vbus_pin_inverted platform attribute   Sergei Shtylyov
• [PATCH 4/8] mm: MIGRATE_CMA migration type added   Arnd Bergmann
• [PATCH 5/8] mm: MIGRATE_CMA isolation functions added   Arnd Bergmann
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Jassi Brar
• [PATCH 6/8 RESEND] drivers: add Contiguous Memory Allocator   Arnd Bergmann
• [PATCH 7/8] ARM: integrate CMA with dma-mapping subsystem   Arnd Bergmann
• [PATCH 8/8] ARM: S5PV210: example of CMA private area for FIMC device on Goni board   Arnd Bergmann
• [PATCH 1/3] ohci-at91: add vbus_pin_inverted platform attribute   Thomas Petazzoni
• [PATCH 1/2] watchdog: Add MPcore watchdog support for cns3xxx SOCs   Tommy Lin
• [PATCHv11 0/8] Contiguous Memory Allocator   Arnd Bergmann
• [PATCH 2/3] at91-ohci: support overcurrent notification   Matthieu CASTET
• [PATCH] ARM: omap4: rename gpmc clock to gpmc_ick   Jan Weitzel
• [PATCH 4/8] mm: MIGRATE_CMA migration type added   Russell King - ARM Linux
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Arnd Bergmann
• [PATCHv11 0/8] Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Russell King - ARM Linux
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Matthieu CASTET
• [PATCH 00/15] Big pxa2[57]x_udc cleanup   Dmitry Eremin-Solenikov
• [PATCH 01/15] ARM: pxa/balloon3: drop udc_is_connected   Dmitry Eremin-Solenikov
• [PATCH 02/15] ARM: pxa/mioa701: drop udc_is_connected   Dmitry Eremin-Solenikov
• [PATCH 03/15] ARM: pxa/stargate2: drop udc_is_connected   Dmitry Eremin-Solenikov
• [PATCH 04/15] ARM: pxa25x_udc: separate lubbock handling to lubbock-usb transceiver   Dmitry Eremin-Solenikov
• [PATCH 05/15] ARM: pxa/lubbock: switch to using lubbock_usb_xceiv transceiver   Dmitry Eremin-Solenikov
• [PATCH 06/15] pxa: drop handling of udc_is_connected   Dmitry Eremin-Solenikov
• [PATCH 07/15] pxa25x_udc: drop support for udc_command   Dmitry Eremin-Solenikov
• [PATCH 08/15] otg: add gpio_pullup OTG transceiver for devices with no VBUS sensing   Dmitry Eremin-Solenikov
• [PATCH 09/15] corgi: convert to use gpio-pullup   Dmitry Eremin-Solenikov
• [PATCH 10/15] poodle: convert to use gpio-pullup   Dmitry Eremin-Solenikov
• [PATCH 11/15] h5000: convert to use gpio-pullup   Dmitry Eremin-Solenikov
• [PATCH 12/15] gpio-vbus: support disabling D+ pullup on suspend   Dmitry Eremin-Solenikov
• [PATCH 13/15] mioa701: move gpio-pullup functionality to gpio-vbus   Dmitry Eremin-Solenikov
• [PATCH 14/15] gpio-pullup: support disabling D+ pullup on suspend   Dmitry Eremin-Solenikov
• [PATCH 15/15] pxa2[57]x_udc: drop gpio_pullup handling   Dmitry Eremin-Solenikov
• [PATCH 0/9] PL08x further cleanups   Russell King - ARM Linux
• [PATCH 1/9] DMA: PL08x: remove unused constants   Russell King - ARM Linux
• [PATCH 2/9] DMA: PL08x: select LLI bus only once per LLI setup   Russell King - ARM Linux
• [PATCH 3/9] DMA: PL08x: clean up LLI debugging   Russell King - ARM Linux
• [PATCH 4/9] DMA: PL08x: separately store source/destination slave address   Russell King - ARM Linux
• [PATCH 5/9] DMA: PL08x: separately store source/destination cctl   Russell King - ARM Linux
• [PATCH 6/9] DMA: PL08x: constify plchan->cd and plat->slave_channels   Russell King - ARM Linux
• [PATCH 7/9] DMA: PL08x: cleanup selection of buswidth   Russell King - ARM Linux
• [PATCH 8/9] DMA: PL08x: avoid recalculating cctl at each prepare   Russell King - ARM Linux
• [PATCH 9/9] DMA: PL08x: cleanup selection of burst size   Russell King - ARM Linux
• [PATCH v5] Add ARM cpu topology definition   Russell King - ARM Linux
• [PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver   Greg KH
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Jürgen Lambrecht
• [PATCH] Enable RTC driver.   Jürgen Lambrecht
• [PATCH 00/15] Big pxa2[57]x_udc cleanup   Eric Miao
• [PATCH 07/15] pxa25x_udc: drop support for udc_command   Felipe Balbi
• [PATCH 04/15] ARM: pxa25x_udc: separate lubbock handling to lubbock-usb transceiver   Felipe Balbi
• [PATCH 15/15] pxa2[57]x_udc: drop gpio_pullup handling   Felipe Balbi
• Unnecessary cache-line flush on page table updates ?   Catalin Marinas
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Arnd Bergmann
• [RFC] virtio: expose for non-virtualization users too   Ohad Ben-Cohen
• Unnecessary cache-line flush on page table updates ?   Russell King - ARM Linux
• [PATCH 2/3] at91-ohci: support overcurrent notification   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH] pxa/magician: fix MAGICIAN_EGPIO_BASE, align with NR_BUILTIN_GPIO   Eric Miao
• RTC backup on omap3 (overo)   Gerber Patrick
• [PATCH 4/7] pxa25x: separate lubbock handling to lubbock-usb transceiver   Dmitry Eremin-Solenikov
• Unnecessary cache-line flush on page table updates ?   Catalin Marinas
• [PATCH 05/15] ARM: pxa/lubbock: switch to using lubbock_usb_xceiv transceiver   Sergei Shtylyov
• [PATCH v2 0/2] Add device tree probe support for tty/serial/imx   Shawn Guo
• [PATCH v2 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Shawn Guo
• [PATCH v2 2/2] serial/imx: add device tree probe support   Shawn Guo
• [PATCH v2 0/3] Add device tree probe support for imx fec driver   Shawn Guo
• [PATCH v2 1/3] dt/net: add helper function of_get_phy_mode   Shawn Guo
• [PATCH v2 2/3] net: ibm_newemac: convert it to use of_get_phy_mode   Shawn Guo
• [PATCH v2 3/3] net/fec: add device tree probe support   Shawn Guo
• [PATCH] mmc: documentation of mmc non-blocking request usage and design.   Per Forlin
• [PATCH v2 0/2] Add device tree probe for imx/mxc gpio   Shawn Guo
• [PATCH v2 1/3] gpio/mxc: get gpio range/base from gpio core   Shawn Guo
• [PATCH v2 2/3] gpio/mxc: get rid of the uses of cpu_is_mx()   Shawn Guo
• [PATCH v2 3/3] gpio/mxc: add device tree probe support   Shawn Guo
• [PATCH] mmc: documentation of mmc non-blocking request usage and design.   Chris Ball
• [PATCH v2 0/3] Add device tree probe for sdhci-esdhc-imx   Shawn Guo
• [PATCH v2 1/3] mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()   Shawn Guo
• [PATCH v2 2/3] mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host   Shawn Guo
• [PATCH v2 3/3] mmc: sdhci-esdhc-imx: add device tree probe support   Shawn Guo
• [PATCH 3/3] mmc: sdhci-esdhc-imx: add device tree probe support   Shawn Guo
• RTC backup on omap3 (overo)   Baruch Siach
• plat-orion multi purpose pins problem for mv78200   Joey Oravec
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Baruch Siach
• [GIT PULL] pxa: patches for v3.1   Eric Miao
• [GIT PULL] pxa: fixing patches for v3.0-rc6   Eric Miao
• [PATCH v5 1/1] drivers:staging:pruss: add pruss staging mfd driver.   Greg KH
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Sascha Hauer
• [PATCH] ARM: omap4: rename gpmc clock to gpmc_ick   Santosh Shilimkar
• [RFC 5/8] remoteproc: add davinci implementation   Grosen, Mark
• [RFC 5/8] remoteproc: add davinci implementation   Grosen, Mark
• [PATCH v2 1/3] gpio/mxc: get gpio range/base from gpio core   Sascha Hauer
• [PATCH] ARM: mxs/tx28: according to the TX28's datasheet D4-D7 are not used for MMC0   Sascha Hauer
• [RFC PATCH v5] ARM hibernation / suspend-to-disk (fwd)   Matthieu CASTET
• [PATCH 3/3] mmc: sdhci-esdhc-imx: add device tree probe support   Grant Likely
• [PATCH v2 1/3] gpio/mxc: get gpio range/base from gpio core   Grant Likely
• [PATCH v2 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Grant Likely
• [PATCHv2] arm: platsmp: Allow secondary cpu hotplug with maxcpus=1   Stephen Boyd
• [PATCH v2 1/3] dt/net: add helper function of_get_phy_mode   Grant Likely
• [PATCH v2 2/3] net: ibm_newemac: convert it to use of_get_phy_mode   Grant Likely
• [PATCH v2 3/3] net/fec: add device tree probe support   Grant Likely
• [PATCH v2 2/3] gpio/mxc: get rid of the uses of cpu_is_mx()   Grant Likely
• [PATCH v2 3/3] gpio/mxc: add device tree probe support   Grant Likely
• [PATCH v2 1/3] mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()   Grant Likely
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   Matthew Garrett
• [PATCH 3/5] arch/arm/mach-omap2/smartreflex.c: add missing error-handling code   Kevin Hilman
• [PATCH v2 3/3] mmc: sdhci-esdhc-imx: add device tree probe support   Grant Likely
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   H. Peter Anvin
• [PATCH 7/7] ASoC: Samsung: Update DMA interface   Grant Likely
• [PATCH v8 09/14] ARM: msm: use remapped PPI interrupts for local timer   David Brown
• [PATCH] ARM: mach-s3c24a0: delete   Nicolas Pitre
• [PATCH v3 04/13] OMAP: hwmod: Wait the idle status to be disabled   Todd Poynor
• Tegra device name for device tree   Stephen Warren
• Tegra device name for device tree   Grant Likely
• [PATCH] ARM: omap4: rename gpmc clock to gpmc_ick   Kevin Hilman
• [PATCH] ARM: omap4: rename gpmc clock to gpmc_ick   Santosh Shilimkar
• [PATCH] ARM: poison initmem when it is freed   Russell King - ARM Linux
• [PATCH v5 1/1] drivers:staging:pruss: add pruss staging mfd driver.   Watkins, Melissa
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Russell King - ARM Linux
• [PATCH V2 0/6] arm_smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   Vitaly Kuzmichev
• [PATCH V2 1/6] arm_smp_twd: Fix typo in 'twd_timer_rate' printing   Vitaly Kuzmichev
• [PATCH V2 2/6] arm_smp_twd: mpcore_wdt: Fix watchdog counter loading   Vitaly Kuzmichev
• [PATCH V2 3/6] mpcore_wdt: Fix WDIOC_SETOPTIONS handling   Vitaly Kuzmichev
• [PATCH V2 4/6] mpcore_wdt: Fix timer mode setup   Vitaly Kuzmichev
• [PATCH V2 5/6] mpcore_wdt: Add cpufreq notifier to reload counter   Vitaly Kuzmichev
• [PATCH V2 6/6] mpcore_wdt: Move declarations in a separate header   Vitaly Kuzmichev
• [PATCH v4 00/18] I2C: OMAP: I2C fixes, removal of cpu_is... from driver   Kevin Hilman
• [PATCH v3] ARM: l2x0: Add OF based initialization   Rob Herring
• [stable] [PATCH v2] msm: timer: compensate for timer shift in msm_read_timer_count   Jeff Ohlstein
• [PATCH] ARM: poison initmem when it is freed   Nicolas Pitre
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Nicolas Pitre
• [PATCH] ARM: poison initmem when it is freed   Russell King - ARM Linux
• [PATCH] mmc: documentation of mmc non-blocking request usage and design.   Per Forlin
• [PATCH v2] documentation of mmc non-blocking request   Per Forlin
• [PATCH v2] mmc: documentation of mmc non-blocking request usage and design.   Per Forlin
• [PATCH v3] documentation of mmc non-blocking request   Per Forlin
• [PATCH v3] mmc: documentation of mmc non-blocking request usage and design.   Per Forlin
• [PATCH] ARM: poison initmem when it is freed   Nicolas Pitre
• [PATCH] tty/serial: tegra: Use engineering names in DT compatible property   Stephen Warren
• [PATCH/RFC] mach-loki: delete   Nicolas Pitre
• [PATCH] ARM: tegra: gpio: Use engineering names in DT compatible property   Stephen Warren
• [PATCH] spi/tegra: Use engineering names in DT compatible property   Stephen Warren
• [PATCH v3] arm: mach-mmp: brownstone.c support multiple sd slots   Philip Rakity
• [PATCH] i2c: tegra: Use engineering names in DT compatible property   Stephen Warren
• [PATCH] ARM: tegra: Harmony: Use engineering names in DT compatible property   Stephen Warren
• [PATCH v3] mmc: documentation of mmc non-blocking request usage and design.   Randy Dunlap
• [alsa-devel] [PATCH] ASoC: wm8731: set the ACTIVE bit if bias ON entered   Mark Brown
• [PATCH 0/3] tegra: Use engineering names in DT compatible properties   Stephen Warren
• [PATCH 1/3] mmc/tegra: Use engineering names in DT compatible property   Stephen Warren
• [PATCH 2/3] ARM: tegra: Use engineering names in DT compatible property   Stephen Warren
• [PATCH 3/3] dt: docs: tegra: Use engineering names in DT compatible property   Stephen Warren
• [PATCH 15/15] pxa2[57]x_udc: drop gpio_pullup handling   Robert Jarzmik
• [PATCH 15/15] pxa2[57]x_udc: drop gpio_pullup handling   Dmitry Eremin-Solenikov
• [PATCH v3] mmc: documentation of mmc non-blocking request usage and design.   Per Forlin
• [PATCH v4] mmc: documentation of mmc non-blocking request usage and design.   Per Forlin
• [PATCH v2] ARM: kirkwood: Add support for Buffalo LS-XHL   Bjørn Forsman
• [PATCH 00/10] Enhance /dev/mem to allow read/write of arbitrary physical addresses   H. Peter Anvin
• [RFC] virtio: expose for non-virtualization users too   H. Peter Anvin
• [PATCH v4] mmc: documentation of mmc non-blocking request usage and design.   Randy Dunlap
• [PATCH] ARM: poison initmem when it is freed   Stephen Boyd
• [PATCH 0/6+1] ARM: EXYNOS4: SYSMMU: Improvements on SYSMMU driver   KyongHo Cho
• [PATCH] ARM: mach-s3c24a0: delete   Nicolas Pitre
• [PATCH] OMAP: hwmod: add kernel cmdline flag to avoid resetting IP blocks during init   Paul Walmsley
• [PATCH] OMAP: hwmod: add kernel cmdline flag to avoid resetting IP blocks during init   Paul Walmsley
• [PATCH v5 1/1] drivers:staging:pruss: add pruss staging mfd driver.   Greg KH
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Nicolas Pitre
• [PATCH 02/10] ARM: add dma_zone_size to the machine_desc structure   Nicolas Pitre
• [PATCH 03/10] ARM: mach-davinci: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size   Nicolas Pitre
• [PATCH 04/10] ARM: mach-h720x: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size   Nicolas Pitre
• [PATCH 05/10] ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size   Nicolas Pitre
• [PATCH 06/10] ARM: mach-pxa: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size   Nicolas Pitre
• [PATCH 07/10] ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size   Nicolas Pitre
• [PATCH 08/10] ARM: mach-sa1100: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size   Nicolas Pitre
• [PATCH 09/10] ARM: mach-shark: move ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size   Nicolas Pitre
• [PATCH 10/10] ARM: ARM_DMA_ZONE_SIZE is no more   Nicolas Pitre
• [PATCH] ARM: get rid of a few StrongARM cache-related build time constants   Nicolas Pitre
• [stable] [PATCH v2] msm: timer: compensate for timer shift in msm_read_timer_count   Greg KH
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Nicolas Pitre
• [PATCH 02/52] ARM: mach-clps711x: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 03/52] ARM: mach-cns3xxx: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 04/52] ARM: mach-davinci: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 05/52] ARM: mach-dove: convert boot-params to atag_offset   Nicolas Pitre
• [PATCH 06/52] ARM: mach-ebsa110: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 07/52] ARM: mach-ep93xx: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 08/52] ARM: mach-exynos4: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 09/52] ARM: mach-footbridge: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 10/52] ARM: mach-gemini: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 11/52] ARM: mach-h720x: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 12/52] ARM: mach-imx: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 13/52] ARM: mach-integrator: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 14/52] ARM: mach-iop13xx: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 15/52] ARM: mach-iop32x: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 16/52] ARM: mach-iop33x: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 17/52] ARM: mach-ixp2000: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 18/52] ARM: mach-ixp23xx: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 19/52] ARM: mach-ixp4xx: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 20/52] ARM: mach-kirkwood: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 21/52] ARM: mach-ks8695: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 22/52] ARM: mach-loki: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 23/52] ARM: mach-lpc32xx: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 24/52] ARM: mach-msm: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 25/52] ARM: mach-mv78xx0: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 26/52] ARM: mach-mx5: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 27/52] ARM: mach-netx: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 28/52] ARM: mach-nomadik: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 29/52] ARM: mach-nuc93x: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 30/52] ARM: mach-omap1: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 31/52] ARM: mach-omap2: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 32/52] ARM: mach-orion5x: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 33/52] ARM: mach-pnx4008: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 34/52] ARM: mach-pxa: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 35/52] ARM: mach-realview: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 36/52] ARM: mach-rpc: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 37/52] ARM: mach-s3c24*: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 38/52] ARM: mach-s5p64x0: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 39/52] ARM: mach-s3c64xx: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 40/52] ARM: mach-s5pc100, mach-s5pv210: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 41/52] ARM: mach-sa1100: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 42/52] ARM: mach-shark: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 43/52] ARM: mach-spear*: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 44/52] ARM: mach-tcc8k: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 45/52] ARM: mach-tegra: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 46/52] ARM: mach-u300: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 47/52] ARM: mach-ux500: convert boot-params to atag_offset   Nicolas Pitre
• [PATCH 48/52] ARM: mach-versatile: convert boot-params to atag_offset   Nicolas Pitre
• [PATCH 49/52] ARM: vexpress: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 50/52] ARM: mach-vt8500: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 51/52] ARM: mach-w90x900: remove useless boot_params entries   Nicolas Pitre
• [PATCH 52/52] ARM: remove boot_params from struct machine_desc   Nicolas Pitre
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Barry Song
• [PATCH v2 0/3] Add device tree probe support for imx fec driver   David Miller
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Nicolas Pitre
• A few other cache related optimizations for Cortex-A9.   heechul Yun
• [PATCH 2/2] SPI: S5PV210: Enable the SPI driver for S5PV210   Tushar Behera
• [PATCH 01/37] ARM: prepare for removal of a bunch of <mach/memory.h> files   Nicolas Pitre
• [PATCH 02/37] ARM: mach-dove: remove include/mach/memory.h   Nicolas Pitre
• [PATCH 03/37] ARM: mach-kirkwood: remove mach/memory.h   Nicolas Pitre
• [PATCH 04/37] ARM: mach-loki: remove mach/memory.h   Nicolas Pitre
• [PATCH 05/37] ARM: mach-orion5x: remove mach/memory.h   Nicolas Pitre
• [PATCH 06/37] ARM: plat-omap: remove CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE related code   Nicolas Pitre
• [PATCH 07/37] ARM: OMAP: move OMAP1 memory config from plat/memory.h to its mach/memory.h   Nicolas Pitre
• [PATCH 08/37] ARM: mach-omap2: remove mach/memory.h   Nicolas Pitre
• [PATCH 09/37] ARM: mach-iop33x: remove mach/memory.h   Nicolas Pitre
• [PATCH 10/37] ARM: mach-ep93xx: remove mach/memory.h and Kconfig selection of SDRAM bank   Nicolas Pitre
• [PATCH 11/37] ARM: mach-s3c2410: remove memory.h   Nicolas Pitre
• [PATCH 12/37] ARM: mach-mv78xx0: remove mach/memory.h   Nicolas Pitre
• [PATCH 13/37] ARM: mach-vexpress: remove mach/memory.h   Nicolas Pitre
• [PATCH 14/37] ARM: mach-w90x900: remove mach/memory.h   Nicolas Pitre
• [PATCH 15/37] ARM: mach-pnx4008: remove mach/memory.h   Nicolas Pitre
• [PATCH 16/37] ARM: mach-iop32x: remove mach/memory.h   Nicolas Pitre
• [PATCH 17/37] ARM: mach-nomadik: remove mach/memory.h   Nicolas Pitre
• [PATCH 18/37] ARM: mach-ux500: remove mach/memory.h   Nicolas Pitre
• [PATCH 19/37] ARM: mach-versatile: remove mach/memory.h   Nicolas Pitre
• [PATCH 20/37] ARM: mach-netx: remove mach/memory.h   Nicolas Pitre
• [PATCH 21/37] ARM: mach-lpc32xx: remove mach/memory.h   Nicolas Pitre
• [PATCH 22/37] ARM: mach-gemini: remove mach/memory.h   Nicolas Pitre
• [PATCH 23/37] ARM: mach-msm: remove mach/memory.h   Nicolas Pitre
• [PATCH 24/37] ARM: spear: remove mach/memory.h and plat/memory.h   Nicolas Pitre
• [PATCH 25/37] ARM: mach-mxs: remove mach/memory.h   Nicolas Pitre
• [PATCH 26/37] ARM: mach-nuc93x: remove mach/memory.h   Nicolas Pitre
• [PATCH 27/37] ARM: mach-cns3xxx: remove mach/memory.h   Nicolas Pitre
• [PATCH 28/37] ARM: mach-mmp: remove mach/memory.h   Nicolas Pitre
• [PATCH 29/37] ARM: plat-tcc: remove mach/memory.h   Nicolas Pitre
• [PATCH 30/37] ARM: mach-tegra: remove mach/memory.h   Nicolas Pitre
• [PATCH 31/37] ARM: mach-s5pc100: remove mach/memory.h   Nicolas Pitre
• [PATCH 32/37] ARM: mach-vt8500: remove mach/memory.h   Nicolas Pitre
• [PATCH 33/37] ARM: mach-shark: remove mach/memory.h   Nicolas Pitre
• [PATCH 34/37] ARM: mach-ebsa110: remove mach/memory.h   Nicolas Pitre
• [PATCH 35/37] ARM: mach-h720x: remove mach/memory.h   Nicolas Pitre
• [PATCH 36/37] ARM: mach-ixp4xx: remove mach/memory.h   Nicolas Pitre
• [PATCH 37/37] ARM: mach-pxa: remove mach/memory.h   Nicolas Pitre
• [PATCH v2 3/3] mmc: sdhci-esdhc-imx: add device tree probe support   Shawn Guo
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Stephen Boyd
• [RFC 5/8] remoteproc: add davinci implementation   Nori, Sekhar
• [PATCH] net/fec: gasket needs to be enabled for some i.mx   Shawn Guo
• [PATCH 1/2] gpio/mxc: get rid of the uses of cpu_is_mx()   Shawn Guo
• [PATCH v2 4/5] OMAP4: clock data: Keep GPMC clocks always enabled and hardware managed   Paul Walmsley
• [PATCH v2 5/5] OMAP4: powerdomain data: Remove unsupported MPU powerdomain state   Paul Walmsley
• [PATCH 5/8] OMAP4: PM: TEMP: Prevent l3init from idling/force sleep   Paul Walmsley
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Grant Likely
• [PATCH v2 0/3] Add device tree probe support for imx fec driver   David Miller
• [RFC][PATCH 4/5] ARM: S5P64x0: Adding OTG PHY control code   Praveen Paneri
• [PATCH] OMAP: clockdomain: Remove redundant call to pwrdm_wait_transition()   Paul Walmsley
• [PATCH] ARM: tegra: gpio: Use engineering names in DT compatible property   Grant Likely
• [PATCH] spi/tegra: Use engineering names in DT compatible property   Grant Likely
• [PATCH] i2c: tegra: Use engineering names in DT compatible property   Grant Likely
• [PATCH v8 00/14] Consolidating GIC per-cpu interrupts   Shawn Guo
• [PATCH] ARM: tegra: Harmony: Use engineering names in DT compatible property   Grant Likely
• [PATCH v2 3/5] OMAP4: powerdomain data: Fix core mem states and missing cefuse flag   Paul Walmsley
• [PATCH v2 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Shawn Guo
• [PATCH 0/3] tegra: Use engineering names in DT compatible properties   Grant Likely
• [PATCH v2 1/5] OMAP4: prcm: Fix errors in few defines name   Paul Walmsley
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH v2 2/5] OMAP4: prm: Remove wrong clockdomain offsets   Paul Walmsley
• [PATCH v2 3/5] OMAP4: powerdomain data: Fix core mem states and missing cefuse flag   Paul Walmsley
• [PATCH 0/5] davinci: da850: add SATA support   Sekhar Nori
• [PATCH 1/5] davinci: psc.h: clean up indentation done using spaces   Sekhar Nori
• [PATCH 2/5] davinci: pass clock flags to davinci_psc_config()   Sekhar Nori
• [PATCH v2 3/5] davinci: enable forced transitions on PSC   Sekhar Nori
• [PATCH v3 4/5] davinci: da850: add support for SATA interface   Sekhar Nori
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH 5/5] davinci: da850 evm: register SATA device   Sekhar Nori
• [PATCH] ARM:SAMSUNG: DMA Cleanup as per sparse   Kukjin Kim
• [PATCH v2 0/3] Add device tree probe support for imx fec driver   Grant Likely
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Kukjin Kim
• [PATCH v2 0/3] Add device tree probe support for imx fec driver   David Miller
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Grant Likely
• [PATCH v2 0/3] Add device tree probe support for imx fec driver   Grant Likely
• [PATCH v5] mmc: documentation of mmc non-blocking request usage and design.   Per Forlin
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Grant Likely
• [PATCH] ARM: S5PC100: Fix for compilation error   Kukjin Kim
• [PATCH] ARM:SAMSUNG: DMA Cleanup as per sparse   Jassi Brar
• [PATCH v2 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Sascha Hauer
• [PATCH 01/37] ARM: prepare for removal of a bunch of <mach/memory.h> files   Barry Song
• [PATCH] OMAP: hwmod: add kernel cmdline flag to avoid resetting IP blocks during init   Tony Lindgren
• [PATCH] OMAP: hwmod: add kernel cmdline flag to avoid resetting IP blocks during init   Tony Lindgren
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Artem Bityutskiy
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH v2 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Shawn Guo
• [PATCH V2] MTD: atmel_nand: optimize read/write buffer functions   Artem Bityutskiy
• [PATCH v2 09/18] OMAP4: clock data: Remove McASP2, McASP3 and MMC6 clocks   Paul Walmsley
• [PATCH v2 10/18] OMAP4: clock data: Remove UNIPRO clock nodes   Paul Walmsley
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH 1/2] SPI: S5PC100: Enable the SPI driver for S5PC100   padma venkat
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Artem Bityutskiy
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Artem Bityutskiy
• [PATCH] ARM: EXYNOS4: Set appropriate I2C device variant   Kukjin Kim
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Kukjin Kim
• [RFC][PATCH 4/5] ARM: S5P64x0: Adding OTG PHY control code   Felipe Balbi
• [PATCH v3] arm: mach-mmp: brownstone.c support multiple sd slots   zhangfei gao
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Paul Walmsley
• [PATCH 15/15] pxa2[57]x_udc: drop gpio_pullup handling   Felipe Balbi
• [PATCH 2/4] MTD: pxa3xx_nand: sperate each chip individual info   Igor Grinberg
• [PATCH 15/15] pxa2[57]x_udc: drop gpio_pullup handling   Dmitry Eremin-Solenikov
• [PATCH 15/15] pxa2[57]x_udc: drop gpio_pullup handling   Felipe Balbi
• [PATCH 2/2] SPI: S5PV210: Enable the SPI driver for S5PV210   padma venkat
• [PATCH v2] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Igor Grinberg
• [PATCH] ARM: S5PC100: Fix for compilation error   padma venkat
• [PATCH] Enable RTC driver.   Sascha Hauer
• [PATCH v2 0/8] OMAP2+: hwmod framework fixes   Paul Walmsley
• [PATCH] ARM: get rid of a few StrongARM cache-related build time constants   Russell King - ARM Linux
• [PATCH v2 0/8] OMAP2+: hwmod framework fixes   Paul Walmsley
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Sascha Hauer
• [GIT PULL] i.MX patches for next merge window   Sascha Hauer
• [PATCH V4] MMC: PM: add suspend/resume in atmel-mci   Felipe Balbi
• [PATCH] ARM:SAMSUNG: DMA Cleanup as per sparse   Sangwook Lee
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Pekka Enberg
• A few other cache related optimizations for Cortex-A9.   Catalin Marinas
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Pekka Enberg
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Wolfram Sang
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Lambrecht Jürgen
• [PATCH] ARM: poison initmem when it is freed   Tixy
• [GIT PULL] pxa: fixing patches for v3.0-rc6   Russell King - ARM Linux
• [GIT PULL] pxa: patches for v3.1   Russell King - ARM Linux
• [PATCH] ARM i.MX dma: Fix burstsize settings   Sascha Hauer
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Lambrecht Jürgen
• Please submit platform trees for inclusion in arm-soc.git v3.1   Nori, Sekhar
• [PATCH V4] MMC: PM: add suspend/resume in atmel-mci   Nicolas Ferre
• [PATCH 0/3] ARM: CSR: Adding CSR SiRFprimaII platform   Barry Song
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH 2/3] ARM: CSR: mapping early DEBUG_LL uart   Barry Song
• [PATCH 3/3] ARM: CSR: initilized L2 cache   Barry Song
• [PATCH v8 00/14] Consolidating GIC per-cpu interrupts   Marc Zyngier
• [PATCH 1/1] davinci: dm646x: move vpif related code to driver core header from platform   Nori, Sekhar
• [PATCH V2 0/6] arm_smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   Marc Zyngier
• Please submit platform trees for inclusion in arm-soc.git v3.1   Barry Song
• [PATCH V2 0/6] arm_smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   Russell King - ARM Linux
• [PATCH 0/7] Re-organize linker layouts   Russell King - ARM Linux
• [PATCH 1/7] ARM: ensure tag tables are const   Russell King - ARM Linux
• [PATCH 2/7] ARM: decompressor: use better output sections   Russell King - ARM Linux
• [PATCH 3/7] ARM: vmlinux.lds: move discarded sections to beginning   Russell King - ARM Linux
• [PATCH 4/7] ARM: vmlinux.lds: rearrange .init output section   Russell King - ARM Linux
• [PATCH 5/7] ARM: vmlinux.lds: remove .rodata/.rodata1 from main .text segment   Russell King - ARM Linux
• [PATCH 6/7] ARM: vmlinux.lds: move init sections between text and data sections   Russell King - ARM Linux
• [PATCH 7/7] ARM: vmlinux.lds: use _text and _stext the same way as x86   Russell King - ARM Linux
• [PATCH] ARM: mach-s3c24a0: delete   Arnd Bergmann
• [PATCH v8 00/14] Consolidating GIC per-cpu interrupts   Marc Zyngier
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [PATCH 2/3] ARM: CSR: mapping early DEBUG_LL uart   Russell King - ARM Linux
• [PATCH V2 0/6] arm_smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   Catalin Marinas
• [PATCH v8 00/14] Consolidating GIC per-cpu interrupts   Russell King - ARM Linux
• Please submit platform trees for inclusion in arm-soc.git v3.1   Arnd Bergmann
• [PATCH 3/3] ARM: CSR: initilized L2 cache   Arnd Bergmann
• [PATCH 2/3] ARM: CSR: mapping early DEBUG_LL uart   Arnd Bergmann
• [PATCH V2 0/6] arm_smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   Russell King - ARM Linux
• [PATCH v8 00/14] Consolidating GIC per-cpu interrupts   Marc Zyngier
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Lothar Waßmann
• [PATCH 2/3] ARM: CSR: mapping early DEBUG_LL uart   Barry Song
• [PATCH v3] ARM: l2x0: Add OF based initialization   Arnd Bergmann
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Artem Bityutskiy
• [PATCH 2/3] ARM: CSR: mapping early DEBUG_LL uart   Barry Song
• [PATCH V2 6/6] mpcore_wdt: Move declarations in a separate header   Arnd Bergmann
• [PATCH v2 0/3] Add device tree probe support for imx fec driver   Shawn Guo
• [PATCH V2 3/6] mpcore_wdt: Fix WDIOC_SETOPTIONS handling   Sergei Shtylyov
• [PATCH V2 2/6] arm_smp_twd: mpcore_wdt: Fix watchdog counter loading   Arnd Bergmann
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Sascha Hauer
• [PATCH V2 5/6] mpcore_wdt: Add cpufreq notifier to reload counter   Sergei Shtylyov
• [PATCH 2/3] ARM: CSR: mapping early DEBUG_LL uart   Russell King - ARM Linux
• [PATCH V2 6/6] mpcore_wdt: Move declarations in a separate header   Sergei Shtylyov
• [PATCH 3/3 v2] ARM: pxa168: Add board support for gplugD   Daniel Mack
• [PATCH V2 3/6] mpcore_wdt: Fix WDIOC_SETOPTIONS handling   Arnd Bergmann
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Lothar Waßmann
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [PATCH v8 00/14] Consolidating GIC per-cpu interrupts   Arnd Bergmann
• [PATCH V2 0/6] arm_smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   Vitaly Kuzmichev
• [PATCH 2/3] ARM: CSR: mapping early DEBUG_LL uart   Barry Song
• [PATCH 1/6 v8] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Russell King - ARM Linux
• [PATCH 00/17] Introduce a led trigger for CPU activity   Bryan Wu
• [PATCH 01/17] leds: create a trigger for CPU activity   Bryan Wu
• [PATCH 02/17] arm: at91: convert old leds drivers to gpio_led and led_trigger drivers   Bryan Wu
• [PATCH 03/17] mach-realview: retire custom LED code   Bryan Wu
• [PATCH 04/17] mach-versatile: retire custom LED code   Bryan Wu
• [PATCH 05/17] mach-ks8695: remove leds driver, since nobody use it   Bryan Wu
• [PATCH 06/17] mach-shark: retire custom LED code   Bryan Wu
• [PATCH 07/17] mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger   Bryan Wu
• [PATCH 08/17] mach-integrator: retire custom LED code   Bryan Wu
• [PATCH 09/17] mach-clps711x: retire custom LED code of P720T machine   Bryan Wu
• [PATCH 10/17] mach-ebsa110: retire custom LED code   Bryan Wu
• [PATCH 11/17] mach-footbridge: retire custom LED code   Bryan Wu
• [PATCH 12/17] mach-pxa: retire custom LED code   Bryan Wu
• [PATCH 13/17] plat-samsung: remove including old leds event API header file   Bryan Wu
• [PATCH 14/17] mach-pnx4008: remove including old leds event API header file   Bryan Wu
• [PATCH 15/17] mach-omap1: retire custom LED code   Bryan Wu
• [PATCH 16/17] mach-sa1100: retire custom LED code   Bryan Wu
• [PATCH 17/17] ARM: use new LEDS CPU trigger stub to replace old one   Bryan Wu
• [PATCH V2 6/6] mpcore_wdt: Move declarations in a separate header   Vitaly Kuzmichev
• [PATCH V2 0/6] arm_smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   Marc Zyngier
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Lambrecht Jürgen
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH 3/3 v2] ARM: pxa168: Add board support for gplugD   Eric Miao
• [PATCH V2 6/6] mpcore_wdt: Move declarations in a separate header   Arnd Bergmann
• [GIT PULL] pxa: patches for v3.1   Eric Miao
• [GIT PULL] pxa: fixing patches for v3.0-rc6   Eric Miao
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Nicolas Pitre
• [PATCH v2 1/3] gpio/mxc: get gpio range/base from gpio core   Shawn Guo
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [PATCH] ARM: mxc: use ARCH_NR_GPIOS to define gpio number   Shawn Guo
• [PATCH 00/17] Introduce a led trigger for CPU activity   Eric Miao
• [PATCH V2 3/6] mpcore_wdt: Fix WDIOC_SETOPTIONS handling   Vitaly Kuzmichev
• [PATCH 00/17] Introduce a led trigger for CPU activity   Russell King - ARM Linux
• [PATCH 01/17] leds: create a trigger for CPU activity   Eric Miao
• [PATCH 00/17] Introduce a led trigger for CPU activity   Eric Miao
• [PATCH] ARM: get rid of a few StrongARM cache-related build time constants   Nicolas Pitre
• [PATCH] ARM: mach-s3c24a0: delete   Nicolas Pitre
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [PATCH 01/17] leds: create a trigger for CPU activity   Russell King - ARM Linux
• PAD_CTL_DVS bit on MX51   Atsushi Nemoto
• [PATCH] ARM: get rid of a few StrongARM cache-related build time constants   Russell King - ARM Linux
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH 00/17] Introduce a led trigger for CPU activity   Nicolas Pitre
• [PATCH V2 3/6] mpcore_wdt: Fix WDIOC_SETOPTIONS handling   Russell King - ARM Linux
• [PATCH] ARM: get rid of a few StrongARM cache-related build time constants   Nicolas Pitre
• [PATCH V2 3/6] mpcore_wdt: Fix WDIOC_SETOPTIONS handling   Russell King - ARM Linux
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Lothar Waßmann
• [GIT PULL] pxa: fixing patches for v3.0-rc6   Arnd Bergmann
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [GIT PULL] pxa: fixing patches for v3.0-rc6   Eric Miao
• [PATCH 16/17] mach-sa1100: retire custom LED code   Jochen Friedrich
• [PATCH 07/17] mach-orion5x: convert custom LED code to gpio_led and LED CPU trigger   Nicolas Pitre
• [PATCH] ARM: cns3xxx: Add support for L2 Cache Controller   Anton Vorontsov
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Arnd Bergmann
• [PATCH 01/17] leds: create a trigger for CPU activity   Nicolas Pitre
• [PATCH V2 3/6] mpcore_wdt: Fix WDIOC_SETOPTIONS handling   Arnd Bergmann
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCH] ARM: cns3xxx: Add support for L2 Cache Controller   Arnd Bergmann
• [PATCH] ARM: get rid of a few StrongARM cache-related build time constants   Dmitry Eremin-Solenikov
• [PATCH 17/17] ARM: use new LEDS CPU trigger stub to replace old one   Arnd Bergmann
• [Linaro-mm-sig] [PATCH 6/8] drivers: add Contiguous Memory Allocator   Nicolas Pitre
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH 3.1 0/4] ARM: simpad: Add support for GPIO attached hardware   Jochen Friedrich
• [PATCH 3.1 1/4] ARM:simpad: Add ucb1x00 GPIO definitions and register GPIO   Jochen Friedrich
• [PATCH 3.1 2/4] ARM:simpad: Cleanup CS3 accessors.   Jochen Friedrich
• [PATCH 3.1 3/4] ARM:simpad: add GPIO based device definitions.   Jochen Friedrich
• [PATCH 3.1 4/4] ARM: simpad: replace ARM specific LED code   Jochen Friedrich
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Arnd Bergmann
• [GIT PULL] pxa: fixing patches for v3.0-rc6   Arnd Bergmann
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [Linaro-mm-sig] [PATCH 6/8] drivers: add Contiguous Memory Allocator   Arnd Bergmann
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH] ARM i.MX dma: Fix burstsize settings   Mark Brown
• [PATCH V2 0/6] arm_smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   Vitaly Kuzmichev
• [PATCH 0/7] Re-organize linker layouts   Nicolas Pitre
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH v3] arm: mach-mmp: brownstone.c support multiple sd slots   Philip Rakity
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [PATCH V2 3/6] mpcore_wdt: Fix WDIOC_SETOPTIONS handling   Arnd Bergmann
• [PATCH v2] genirq: replace irq_gc_ack() with {set,clr}_bit variants   Simon Guinot
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCH v2 3/3] mmc: sdhci-esdhc-imx: add device tree probe support   Shawn Guo
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCH v2 3/3] mmc: sdhci-esdhc-imx: add device tree probe support   Grant Likely
• Unnecessary cache-line flush on page table updates ?   Catalin Marinas
• [PATCH 1/3] ARM: pxa: fix PGSR register address calculation   Eric Miao
• [PATCH 2/3] ARM: pxa910: correct nand pmu setting   Eric Miao
• [PATCH 3/3] ARM: pxa168: correct nand pmu setting   Eric Miao
• [PATCH v2] davinci: da850 EVM: read mac address from SPI flash   Nori, Sekhar
• Unnecessary cache-line flush on page table updates ?   Russell King - ARM Linux
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Christoph Lameter
• Unnecessary cache-line flush on page table updates ?   Catalin Marinas
• [PATCH v4] arm: mach-mmp: brownstone.c support multiple sd slots   Philip Rakity
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Michal Nazarewicz
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH v4] arm: mach-mmp: brownstone.c support multiple sd slots   Eric Miao
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• Unnecessary cache-line flush on page table updates ?   Catalin Marinas
• plat-orion multi purpose pins problem for mv78200   Simon Guinot
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Christoph Lameter
• [GIT PULL] pxa: fixing patches for v3.0-rc6   Eric Miao
• [PATCH RESEND v2 3/3] net/fec: add device tree probe support   Shawn Guo
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Sascha Hauer
• [PATCH v3 0/2] Add device tree probe support for tty/serial/imx   Shawn Guo
• [PATCH v3 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Shawn Guo
• [PATCH v3 2/2] serial/imx: add device tree probe support   Shawn Guo
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Arnd Bergmann
• plat-orion multi purpose pins problem for mv78200   saeed bishara
• [GIT PULL] pxa: fixing patches for v3.0-rc6   Arnd Bergmann
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Nicolas Pitre
• [PATCH v2] davinci: da850: add a .set_rate method to ref_clk   Nori, Sekhar
• [PATCH v3 0/3] Add device tree probe for imx/mxc gpio   Shawn Guo
• [PATCH v3 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Sascha Hauer
• [PATCH v3 1/3] gpio/mxc: get rid of the uses of cpu_is_mx()   Shawn Guo
• [PATCH v3 2/3] ARM: mxc: use ARCH_NR_GPIOS to define gpio number   Shawn Guo
• [PATCH v3 3/3] gpio/mxc: add device tree probe support   Shawn Guo
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Vaidyanathan Srinivasan
• [PATCH v3 0/4] Add device tree probe for sdhci-esdhc-imx   Shawn Guo
• [PATCH v3 1/4] mmc: sdhci-esdhc-imx: do not reference platform data after probe   Shawn Guo
• [PATCH v3 2/4] mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx()   Shawn Guo
• [PATCH v3 3/4] mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host   Shawn Guo
• [PATCH v3 4/4] mmc: sdhci-esdhc-imx: add device tree probe support   Shawn Guo
• [PATCH] Add 'config IMX_NFC_V1_BISWAP' to swap the Bad block Indicator, and use for imx27pdk nand support.   Lothar Waßmann
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Vaidyanathan Srinivasan
• [PATCH v3 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Shawn Guo
• [GIT PULL] pxa: patches for v3.1   Arnd Bergmann
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Russell King - ARM Linux
• [GIT PULL] i.MX patches for next merge window   Arnd Bergmann
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Russell King - ARM Linux
• [GIT PULL] non-critical omap fixes for v3.1 merge window   Arnd Bergmann
• [PATCH RESEND v3 0/2] Add device tree probe support for tty/serial/imx   Shawn Guo
• [PATCH v3 1/2] serial/imx: get rid of the uses of cpu_is_mx1()   Shawn Guo
• [PATCH v3 2/2] serial/imx: add device tree probe support   Shawn Guo
• [PATCH V2 3/6] mpcore_wdt: Fix WDIOC_SETOPTIONS handling   Wim Van Sebroeck
• [PATCH 2/2] SPI: SAMSUNG: Bug fix for SPI with different FIFO level   Grant Likely
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Stephen Boyd
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• Unnecessary cache-line flush on page table updates ?   Russell King - ARM Linux
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Nicolas Pitre
• [PATCH] ARM: cns3xxx: Add support for L2 Cache Controller   Rob Herring
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Nicolas Pitre
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Nicolas Pitre
• [RFC PATCH 1/5] OMAP3:I2C: Add device tree nodes for beagle board   Grant Likely
• plat-orion multi purpose pins problem for mv78200   Joey Oravec
• [RFC PATCH 1/5] OMAP3:I2C: Add device tree nodes for beagle board   Grant Likely
• [RFC PATCH 2/5] OMAP4:I2C: Add device tree nodes for panda board   Grant Likely
• [RFC PATCH 3/5] OMAP3: Beagle: Update beagle board file to use DT   Grant Likely
• [RFC PATCH 4/5] OMAP4: Panda: Update panda board file to use DT   Grant Likely
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Christoph Lameter
• [PATCH RESEND 2] arm: mach-vt8500: add forgotten irq_data conversion   Wolfram Sang
• [RFC PATCH 5/5] OMAP: I2C: Convert I2C driver to use device tree   Grant Likely
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Nicolas Pitre
• [PATCH] OMAP: omap_device: replace _find_by_pdev() with to_omap_device()   Kevin Hilman
• A few other cache related optimizations for Cortex-A9.   Russell King - ARM Linux
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Rajendra Nayak
• [PATCH RESEND 2] arm: mach-vt8500: add forgotten irq_data conversion   Russell King - ARM Linux
• [PATCH 1/4] mmci: use StartBitErr to detect bad connections   Russell King - ARM Linux
• [PATCH RESEND 2] arm: mach-vt8500: add forgotten irq_data conversion   Russell King - ARM Linux
• [PATCH v4] ARM: Use generic BUG() handler   Russell King - ARM Linux
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   david at lang.hm
• [Linaro-mm-sig] [PATCH 6/8] drivers: add Contiguous Memory Allocator   Arnd Bergmann
• [PATCH] ARM: DMA: Silence declared inside parameter list warning for !CONFIG_MMU   Russell King - ARM Linux
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH] ARM: poison initmem when it is freed   Russell King - ARM Linux
• [PATCH] ARM: poison initmem when it is freed   Russell King - ARM Linux
• [PATCH 1/2] dt: add helper function to read u32 arrays   Rob Herring
• [PATCH v4 2/2] ARM: l2x0: Add OF based initialization   Rob Herring
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [PATCH v4 2/2] ARM: l2x0: Add OF based initialization   Arnd Bergmann
• [PATCH] ARM: poison initmem when it is freed   Stephen Boyd
• [PATCH] OMAP: hwmod: add kernel cmdline flag to avoid resetting IP blocks during init   Paul Walmsley
• [PATCH 1/2] dt: add helper function to read u32 arrays   Grant Likely
• [PATCH] ARM: poison initmem when it is freed   Russell King - ARM Linux
• [PATCH] OMAP: hwmod: add kernel cmdline flag to avoid resetting IP blocks during init   Paul Walmsley
• [PATCH] ARM: fix regression in IXP4xx clocksource   Krzysztof Halasa
• [PATCH v4 2/2] ARM: l2x0: Add OF based initialization   Grant Likely
• [PATCH v3 1/4] mmc: sdhci-esdhc-imx: do not reference platform data after probe   Grant Likely
• [PATCH v3 4/4] mmc: sdhci-esdhc-imx: add device tree probe support   Grant Likely
• [RFC/RFT 1/2] gpio/basic_mmio: add support for enable register   Grant Likely
• [PATCH] ARM: fix regression in IXP4xx clocksource   Russell King - ARM Linux
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH v4 2/2] ARM: l2x0: Add OF based initialization   Arnd Bergmann
• [PATCH v2 0/8] OMAP2+: hwmod framework fixes   Paul Walmsley
• [PATCH] ARM: poison initmem when it is freed   Tim Bird
• [RFC/RFT 2/2] davinci: use generic memory mapped gpio for tnetv107x   Grant Likely
• [PATCHv11 0/8] Contiguous Memory Allocator   Andrew Morton
• [PATCH] OMAP: omap_device: replace _find_by_pdev() with to_omap_device()   Felipe Balbi
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Paul Walmsley
• [PATCH v3 09/13] OMAP4: hwmod data: Align interconnect format with regular modules   Paul Walmsley
• [PATCHv2] arm: platsmp: Allow secondary cpu hotplug with maxcpus=1   Russell King - ARM Linux
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Russell King - ARM Linux
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Russell King - ARM Linux
• [PATCH 02/10] ARM: add dma_zone_size to the machine_desc structure   Russell King - ARM Linux
• [PATCH 05/10] ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size   Russell King - ARM Linux
• [PATCH 07/10] ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size   Russell King - ARM Linux
• [RFC PATCH 1/5] OMAP3:I2C: Add device tree nodes for beagle board   Stephen Warren
• [PATCH v3 05/13] OMAP2+: hwmod: Replace clkdm access from main_clk using hwmod attribute   Paul Walmsley
• [PATCH] ARM: cns3xxx: Add support for L2 Cache Controller   Lin Mac
• [RFC PATCH 1/5] OMAP3:I2C: Add device tree nodes for beagle board   Grant Likely
• [PATCH] dmaengine: mxs-dma: skip request_irq for NO_IRQ   Shawn Guo
• [PATCH v4 2/2] ARM: l2x0: Add OF based initialization   Olof Johansson
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   H Hartley Sweeten
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH] ARM i.MX dma: Fix burstsize settings   Vinod Koul
• [PATCH] dmaengine: mxs-dma: skip request_irq for NO_IRQ   Vinod Koul
• [PATCH] remove unnecessary cache flush on v6 copypage   heechul Yun
• [PATCH 2/3] dmaengine: at_hdmac: improve power management routines   Vinod Koul
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH 3/3] dmaengine: at_hdmac: add slave config operation   Vinod Koul
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Nicolas Pitre
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Nicolas Pitre
• A few other cache related optimizations for Cortex-A9.   heechul Yun
• [PATCH 02/10] ARM: add dma_zone_size to the machine_desc structure   Nicolas Pitre
• [PATCH] dmaengine: mxs-dma: skip request_irq for NO_IRQ   Huang Shijie
• [PATCH] dmaengine: mxs-dma: skip request_irq for NO_IRQ   Shawn Guo
• [PATCH 05/10] ARM: mach-ixp4xx: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size   Nicolas Pitre
• [PATCH 07/10] ARM: mach-realview: move from ARM_DMA_ZONE_SIZE to mdesc->dma_zone_size   Nicolas Pitre
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Nicolas Pitre
• parallel load of modules on an ARM multicore   George G. Davis
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Ankita Garg
• [PATCH v2] davinci: da850 EVM: read mac address from SPI flash   Rajashekhara, Sudhakar
• [PATCH] OMAP: hwmod: add kernel cmdline flag to avoid resetting IP blocks during init   Tony Lindgren
• [Linaro-mm-sig] [PATCH 6/8] drivers: add Contiguous Memory Allocator   Nicolas Pitre
• [GIT PULL] pxa: patches for v3.1   Eric Miao
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Tony Lindgren
• [GIT PULL v3 0/3] TrimSlice updates for 3.1   Mike Rapoport
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH v4 0/3] ARM: CSR: Adding CSR SiRFprimaII platform   Barry Song
• [PATCH v4 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH v4 2/3] ARM: CSR: mapping early DEBUG_LL uart   Barry Song
• [PATCH v4 3/3] ARM: CSR: initializing L2 cache   Barry Song
• plat-orion multi purpose pins problem for mv78200   saeed bishara
• [PATCH] arm: fix regression in ixp4xx clocksource   Krzysztof Halasa
• [PATCH] ARM: fix regression in IXP4xx clocksource   Krzysztof Halasa
• [PATCH 1/6 v8] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Alexey Charkov
• [PATCH] ARM: cns3xxx: Add support for L2 Cache Controller   Arnd Bergmann
• [GIT PULL] pxa: patches for v3.1   Arnd Bergmann
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Martin Fouts
• [PATCH] ARM: cns3xxx: Add support for L2 Cache Controller   Imre Kaloz
• [PATCHv11 0/8] Contiguous Memory Allocator   Arnd Bergmann
• [BUGFIX][PATCH] plat-mxc: [cpufreq] Fix section mismatch due to incorrect __init attributes   Lothar Waßmann
• [PATCH v3 2/3] ARM: mxc: use ARCH_NR_GPIOS to define gpio number   Sascha Hauer
• [PATCH] ARM: cns3xxx: Add support for L2 Cache Controller   Russell King - ARM Linux
• [PATCH 1/6 v8] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Arnd Bergmann
• [PATCH 1/6 v8] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Russell King - ARM Linux
• [PATCH 1/6 v8] ARM: Add basic architecture support for VIA/WonderMedia 85xx SoC's   Arnd Bergmann
• [GIT PULL] i.MX fixes   Sascha Hauer
• [GIT PULL] Cortex-A5 and Cortex-A15 support   Will Deacon
• [PATCH v3 04/13] OMAP: hwmod: Wait the idle status to be disabled   Paul Walmsley
• [GIT PULL] i.MX cleanups   Sascha Hauer
• [PATCH] remove unnecessary cache flush on v6 copypage   Russell King - ARM Linux
• [GIT PULL] i.MX feature additions   Sascha Hauer
• [PATCH v3 00/13] OMAP4: Add modulemode support to hwmod framework   Paul Walmsley
• [PATCH v3 01/40] Subject: ARM: mm: proc-macros Add generic proc/cache/tlb struct definition macros   Russell King - ARM Linux
• [PATCH v3 03/13] OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros   Paul Walmsley
• [PATCH v3 06/13] OMAP4: hwmod: Replace RSTCTRL absolute address with offset macros   Paul Walmsley
• [PATCH v3 12/13] OMAP4: cm: Add two new APIs for modulemode control   Paul Walmsley
• [GIT PULL] i.MX cleanups   Arnd Bergmann
• reply: [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Huang Shijie
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Igor Grinberg
• [PATCH] remove unnecessary cache flush on v6 copypage   Catalin Marinas
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH v3 14/40] Subject: ARM: mm: proc-arm6_7: Use the new processor struct macros   Russell King - ARM Linux
• [PATCH v3 27/40] Subject: ARM: mm: proc-mohawk: Use the new processor struct macros   Russell King - ARM Linux
• [PATCH v3 26/40] Subject: ARM: mm: proc-feroceon: Use the new processor struct macros   Russell King - ARM Linux
• ARM cortex A9 performance issue   rd bairva
• [PATCH v4] ARM: Use generic BUG() handler   Dave Martin
• [PATCH v3 01/40] Subject: ARM: mm: proc-macros Add generic proc/cache/tlb struct definition macros   Will Deacon
• [PATCH v3 01/40] Subject: ARM: mm: proc-macros Add generic proc/cache/tlb struct definition macros   Dave Martin
• [PATCH v3 14/40] Subject: ARM: mm: proc-arm6_7: Use the new processor struct macros   Dave Martin
• [PATCH v3 26/40] Subject: ARM: mm: proc-feroceon: Use the new processor struct macros   Dave Martin
• [PATCH v3 01/40] Subject: ARM: mm: proc-macros Add generic proc/cache/tlb struct definition macros   Russell King - ARM Linux
• [PATCH 0/4] Cleanups for the mini2440 board   Wolfram Sang
• [PATCH 1/4] arm: plat-s3c24xx: dma: don't use uninitialized variable   Wolfram Sang
• [PATCH 2/4] arm: plat-s3c24xx: dma: drop return codes in void function   Wolfram Sang
• [PATCH 3/4] arm: mach-s3c2440: dma: fix section mismatch   Wolfram Sang
• [PATCH 4/4] arm: mach-s3c2440: mini2440: fix section mismatch   Wolfram Sang
• [PATCH] ARM: make CNS3XXX select CPU_V6K   Imre Kaloz
• [PATCH] ARM: support XZ compressed kernels   Imre Kaloz
• [PATCH v3 27/40] Subject: ARM: mm: proc-mohawk: Use the new processor struct macros   Dave Martin
• [PATCH 3/4] arm: mach-s3c2440: dma: fix section mismatch   Russell King - ARM Linux
• [PATCH v3 01/40] Subject: ARM: mm: proc-macros Add generic proc/cache/tlb struct definition macros   Dave Martin
• [PATCH] remove unnecessary cache flush on v6 copypage   saeed bishara
• [PATCH 3/4] arm: mach-s3c2440: dma: fix section mismatch   Wolfram Sang
• [PATCH v4 0/3] ARM: CSR: Adding CSR SiRFprimaII platform   Arnd Bergmann
• [PATCH] net/fec: gasket needs to be enabled for some i.mx   David Miller
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Igor Grinberg
• [PATCH v2 0/2] Add device tree probe for imx/mxc gpio   Sergei Shtylyov
• [PATCH v2 2/3] mmc: sdhci-pltfm: dt device does not pass parent to sdhci_alloc_host   Sergei Shtylyov
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Sergei Shtylyov
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH 3/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Lennert Buytenhek
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Tony Lindgren
• [RFC] dmaengine: add new api for preparing simple slave transfer   Raju, Sundaram
• [RFC/RFT 2/2] davinci: use generic memory mapped gpio for tnetv107x   Nori, Sekhar
• [PATCH V3 0/4] ARM: smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   Vitaly Kuzmichev
• [PATCH V3 1/4] ARM: smp_twd: Fix typo in 'twd_timer_rate' printing   Vitaly Kuzmichev
• [PATCH V3 2/4] ARM: smp_twd: mpcore_wdt: Fix watchdog counter loading   Vitaly Kuzmichev
• [PATCH V3 3/4] ARM: mpcore_wdt: Fix WDIOC_SETOPTIONS handling   Vitaly Kuzmichev
• [PATCH V3 4/4] ARM: mpcore_wdt: Fix timer mode setup   Vitaly Kuzmichev
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [PATCH 3/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Russell King - ARM Linux
• [PATCH V3 1/4] ARM: smp_twd: Fix typo in 'twd_timer_rate' printing   Russell King - ARM Linux
• [PATCH V3 2/4] ARM: smp_twd: mpcore_wdt: Fix watchdog counter loading   Arnd Bergmann
• [PATCH V3 3/4] ARM: mpcore_wdt: Fix WDIOC_SETOPTIONS handling   Arnd Bergmann
• [PATCH V3 0/4] ARM: smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   Wim Van Sebroeck
• [PATCH] plat-mxc: add missing initialisation of basic_mmio_gpio shadow variables   Lothar Waßmann
• [PATCH V3 1/4] ARM: smp_twd: Fix typo in 'twd_timer_rate' printing   Vitaly Kuzmichev
• [PATCH 00/17] Introduce a led trigger for CPU activity   Bryan Wu
• [PATCH 01/17] leds: create a trigger for CPU activity   Bryan Wu
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH v4 0/3] ARM: CSR: Adding CSR SiRFprimaII platform   Barry Song
• [PATCH v4 0/3] ARM: CSR: Adding CSR SiRFprimaII platform   Arnd Bergmann
• [PATCH V3 1/4] ARM: smp_twd: Fix typo in 'twd_timer_rate' printing   Vitaly Kuzmichev
• [PATCH v4 0/3] ARM: CSR: Adding CSR SiRFprimaII platform   Barry Song
• [PATCH 16/17] mach-sa1100: retire custom LED code   Bryan Wu
• [PATCH] net/fec: gasket needs to be enabled for some i.mx   Shawn Guo
• [PATCH] ARM: xscale: Always build the kernel in multi cache model mode   Dave Martin
• [PATCH v4 0/3] ARM: CSR: Adding CSR SiRFprimaII platform   Arnd Bergmann
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   johnlinn at comcast.net
• plat-orion multi purpose pins problem for mv78200   Joey Oravec
• [PATCH V4 2/4] ARM: smp_twd: mpcore_wdt: Fix watchdog counter loading   Vitaly Kuzmichev
• [PATCH V3 2/4] ARM: smp_twd: mpcore_wdt: Fix watchdog counter loading   Vitaly Kuzmichev
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [PATCH v4 00/40] ARM: mm: Add generic macros for declaring various CPU structs   Dave Martin
• [PATCH v4 01/40] ARM: mm: proc-macros: Add generic proc/cache/tlb struct definition macros   Dave Martin
• [PATCH v4 02/40] ARM: assembler.h: Add string declaration macro   Dave Martin
• [PATCH v4 03/40] ARM: mm: cache-fa: Use the new processor struct macros   Dave Martin
• [PATCH v4 04/40] ARM: mm: cache-v3: Use the new processor struct macros   Dave Martin
• [PATCH v4 05/40] ARM: mm: cache-v4: Use the new processor struct macros   Dave Martin
• [PATCH v4 06/40] ARM: mm: cache-v4wb: Use the new processor struct macros   Dave Martin
• [PATCH v4 07/40] ARM: mm: cache-v4wt: Use the new processor struct macros   Dave Martin
• [PATCH v4 08/40] ARM: mm: cache-v6: Use the new processor struct macros   Dave Martin
• [PATCH v4 09/40] ARM: mm: cache-v7: Use the new processor struct macros   Dave Martin
• [PATCH v4 10/40] ARM: mm: proc-arm1020: Use the new processor struct macros   Dave Martin
• [PATCH v4 11/40] ARM: mm: proc-arm1020e: Use the new processor struct macros   Dave Martin
• [PATCH v4 12/40] ARM: mm: proc-arm1022: Use the new processor struct macros   Dave Martin
• [PATCH v4 13/40] ARM: mm: proc-arm1026: Use the new processor struct macros   Dave Martin
• [PATCH v4 14/40] ARM: mm: proc-arm6_7: Use the new processor struct macros   Dave Martin
• [PATCH v4 15/40] ARM: mm: proc-arm720: Use the new processor struct macros   Dave Martin
• [PATCH v4 16/40] ARM: mm: proc-arm740: Use the new processor struct macros   Dave Martin
• [PATCH v4 17/40] ARM: mm: proc-arm7tdmi: Use the new processor struct macros   Dave Martin
• [PATCH v4 18/40] ARM: mm: proc-arm920: Use the new processor struct macros   Dave Martin
• [PATCH v4 19/40] ARM: mm: proc-arm922: Use the new processor struct macros   Dave Martin
• [PATCH v4 20/40] ARM: mm: proc-arm925: Use the new processor struct macros   Dave Martin
• [PATCH v4 21/40] ARM: mm: proc-arm926: Use the new processor struct macros   Dave Martin
• [PATCH v4 22/40] ARM: mm: proc-arm940: Use the new processor struct macros   Dave Martin
• [PATCH v4 23/40] ARM: mm: proc-arm946: Use the new processor struct macros   Dave Martin
• [PATCH v4 24/40] ARM: mm: proc-arm9tdmi: Use the new processor struct macros   Dave Martin
• [PATCH v4 25/40] ARM: mm: proc-fa526: Use the new processor struct macros   Dave Martin
• [PATCH v4 26/40] ARM: mm: proc-feroceon: Use the new processor struct macros   Dave Martin
• [PATCH v4 27/40] ARM: mm: proc-mohawk: Use the new processor struct macros   Dave Martin
• [PATCH v4 28/40] ARM: mm: proc-sa110: Use the new processor struct macros   Dave Martin
• [PATCH v4 29/40] ARM: mm: proc-sa1100: Use the new processor struct macros   Dave Martin
• [PATCH v4 30/40] ARM: mm: proc-v6: Use the new processor struct macros   Dave Martin
• [PATCH v4 31/40] ARM: mm: proc-v7: Use the new processor struct macros   Dave Martin
• [PATCH v4 32/40] ARM: mm: proc-xsc3: Use new generic struct definition macros   Dave Martin
• [PATCH v4 33/40] ARM: mm: proc-xscale: Use new generic struct definition macros   Dave Martin
• [PATCH v4 34/40] ARM: mm: tlb-fa: Use the new processor struct macros   Dave Martin
• [PATCH v4 35/40] ARM: mm: tlb-v3: Use the new processor struct macros   Dave Martin
• [PATCH v4 36/40] ARM: mm: tlb-v4: Use the new processor struct macros   Dave Martin
• [PATCH v4 37/40] ARM: mm: tlb-v4wb: Use the new processor struct macros   Dave Martin
• [PATCH v4 38/40] ARM: mm: tlb-v4wbi: Use the new processor struct macros   Dave Martin
• [PATCH v4 39/40] ARM: mm: tlb-v6: Use the new processor struct macros   Dave Martin
• [PATCH v4 40/40] ARM: mm: tlb-v7: Use the new processor struct macros   Dave Martin
• [PATCH 30/52] ARM: mach-omap1: convert boot_params to atag_offset   Tony Lindgren
• [PATCH 31/52] ARM: mach-omap2: convert boot_params to atag_offset   Tony Lindgren
• [PATCH 08/37] ARM: mach-omap2: remove mach/memory.h   Tony Lindgren
• [GIT PULL] i.MX feature additions   Arnd Bergmann
• [PATCH 15/17] mach-omap1: retire custom LED code   Tony Lindgren
• [PATCHv2] remove unnecessary cache flush on v6 copypage   Heechul Yun
• [PATCH 06/37] ARM: plat-omap: remove CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE related code   Tony Lindgren
• [PATCH 07/37] ARM: OMAP: move OMAP1 memory config from plat/memory.h to its mach/memory.h   Tony Lindgren
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Martin Fouts
• [PATCH v8 04/14] ARM: omap4: use remapped PPI interrupts for local timer   Tony Lindgren
• [PATCHv2] remove unnecessary cache flush on v6 copypage   Catalin Marinas
• [PATCH 08/37] ARM: mach-omap2: remove mach/memory.h   Arnd Bergmann
• [PATCH v3 2/3] ARM: mxc: use ARCH_NR_GPIOS to define gpio number   Shawn Guo
• [PATCH 08/37] ARM: mach-omap2: remove mach/memory.h   Nicolas Pitre
• ARM cortex A9 performance issue   Dave Martin
• [PATCH 31/52] ARM: mach-omap2: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Nicolas Pitre
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Arnd Bergmann
• [PATCH 08/37] ARM: mach-omap2: remove mach/memory.h   Arnd Bergmann
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Tony Lindgren
• [RFC PATCH 00/17] ARM: common idle infrastructure   Lorenzo Pieralisi
• [PATCH 01/17] ARM: proc: add definition of cpu_reset for ARMv6 and ARMv7 cores   Lorenzo Pieralisi
• [PATCH 02/17] ARM: Add cpu power management notifiers   Lorenzo Pieralisi
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Lorenzo Pieralisi
• [PATCH 04/17] ARM: vfp: Use cpu pm notifiers to save vfp state   Lorenzo Pieralisi
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Lorenzo Pieralisi
• [RFC PATCH 06/17] ARM: kernel: save/restore generic infrastructure   Lorenzo Pieralisi
• [RFC PATCH 07/17] ARM: kernel: save/restore v7 assembly helpers   Lorenzo Pieralisi
• [RFC PATCH 08/17] ARM: kernel: save/restore arch runtime support   Lorenzo Pieralisi
• [RFC PATCH 09/17] ARM: kernel: v7 resets support   Lorenzo Pieralisi
• [RFC PATCH 10/17] ARM: kernel: save/restore v7 infrastructure support   Lorenzo Pieralisi
• [RFC PATCH 11/17] ARM: kernel: add support for Lamport's bakery locks   Lorenzo Pieralisi
• [RFC PATCH 12/17] ARM: kernel: add SCU reset hook   Lorenzo Pieralisi
• [RFC PATCH 13/17] ARM: mm: L2x0 save/restore support   Lorenzo Pieralisi
• [RFC PATCH 14/17] ARM: kernel: save/restore 1:1 page tables   Lorenzo Pieralisi
• [RFC PATCH 15/17] ARM: perf: use cpu pm notifiers to save pmu state   Lorenzo Pieralisi
• [RFC PATCH 16/17] ARM: PM: enhance idle pm notifiers   Lorenzo Pieralisi
• [RFC PATCH 17/17] ARM: kernel: save/restore build infrastructure   Lorenzo Pieralisi
• reply: [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Arnd Bergmann
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Arnd Bergmann
• [PATCH V3 1/4] ARM: smp_twd: Fix typo in 'twd_timer_rate' printing   Vitaly Kuzmichev
• [PATCH v4 00/40] ARM: mm: Add generic macros for declaring various CPU structs   Russell King - ARM Linux
• [PATCH 16/17] mach-sa1100: retire custom LED code   Jochen Friedrich
• [GIT PULL] omap board updates for v3.1 merge window   Tony Lindgren
• [PATCH 07/52] ARM: mach-ep93xx: convert boot_params to atag_offset   H Hartley Sweeten
• [PATCH v4 00/40] ARM: mm: Add generic macros for declaring various CPU structs   Dave Martin
• [RFC/RFT 1/2] gpio/basic_mmio: add support for enable register   Nori, Sekhar
• [PATCH 10/37] ARM: mach-ep93xx: remove mach/memory.h and Kconfig selection of SDRAM bank   H Hartley Sweeten
• [PATCHv2] arm: mm: Poison freed init memory   Stephen Boyd
• [PATCH] ARM: cns3xxx: Add support for L2 Cache Controller   Anton Vorontsov
• [PATCH] ARM: cns3xxx: Add support for L2 Cache Controller   Anton Vorontsov
• [PATCH] ARM: make CNS3XXX select CPU_V6K   Anton Vorontsov
• [PATCH v2] ARM: cns3xxx: Add support for L2 Cache Controller   Anton Vorontsov
• [RFC PATCH 2/5] OMAP4:I2C: Add device tree nodes for panda board   G, Manjunath Kondaiah
• [PATCH 07/52] ARM: mach-ep93xx: convert boot_params to atag_offset   Nicolas Pitre
• [RFC PATCH 3/5] OMAP3: Beagle: Update beagle board file to use DT   G, Manjunath Kondaiah
• [PATCH 0/3] Add generic idle notifiers   Kevin Hilman
• [PATCH] ARM: get rid of a few StrongARM cache-related build time constants   Russell King - ARM Linux
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   John Linn
• [PATCH 2/3] ARM: Call idle notifiers   Kevin Hilman
• [RFC PATCH 5/5] OMAP: I2C: Convert I2C driver to use device tree   G, Manjunath Kondaiah
• [RFC PATCH 00/17] ARM: common idle infrastructure   Russell King - ARM Linux
• [PATCH 10/37] ARM: mach-ep93xx: remove mach/memory.h and Kconfig selection of SDRAM bank   Nicolas Pitre
• [PATCH 07/52] ARM: mach-ep93xx: convert boot_params to atag_offset   H Hartley Sweeten
• [PATCH 0/7] Re-organize linker layouts   Stephen Boyd
• [PATCH v4 00/40] ARM: mm: Add generic macros for declaring various CPU structs   Will Deacon
• [PATCH 10/37] ARM: mach-ep93xx: remove mach/memory.h and Kconfig selection of SDRAM bank   H Hartley Sweeten
• [PATCHv2] arm: mm: Poison freed init memory   Russell King - ARM Linux
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Arnd Bergmann
• [PATCHv2] arm: mm: Poison freed init memory   Nicolas Pitre
• [PATCHv2] arm: mm: Poison freed init memory   Stephen Boyd
• [PATCH 10/37] ARM: mach-ep93xx: remove mach/memory.h and Kconfig selection of SDRAM bank   Nicolas Pitre
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   Pekka Enberg
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Grant Likely
• [PATCH 07/52] ARM: mach-ep93xx: convert boot_params to atag_offset   Nicolas Pitre
• [PATCH v3 03/13] OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros   Todd Poynor
• [RFC PATCH 5/5] OMAP: I2C: Convert I2C driver to use device tree   Grant Likely
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   H Hartley Sweeten
• [GIT PULL v2] Cortex-A5 and Cortex-A15 support   Will Deacon
• [RFC/RFT 1/2] gpio/basic_mmio: add support for enable register   Grant Likely
• [PATCH] ARM: get rid of a few StrongARM cache-related build time constants   Nicolas Pitre
• [PATCH] plat-mxc: add missing initialisation of basic_mmio_gpio shadow variables   Grant Likely
• [PATCH] net/fec: gasket needs to be enabled for some i.mx   Grant Likely
• [RFC 02/12] omap: mcbsp: Remove rx_/tx_word_length variables   Tony Lindgren
• [PATCH] ARM: support XZ compressed kernels   Nicolas Pitre
• [PATCH v3 2/3] ARM: mxc: use ARCH_NR_GPIOS to define gpio number   Grant Likely
• [PATCH v3 2/3] ARM: mxc: use ARCH_NR_GPIOS to define gpio number   Grant Likely
• [PATCH v3 0/3] Add device tree probe for imx/mxc gpio   Grant Likely
• [RFC] dmaengine: add new api for preparing simple slave transfer   Linus Walleij
• [PATCH 2/4] arm: plat-s3c24xx: dma: drop return codes in void function   Rafael J. Wysocki
• [PATCH 0/9] PL08x further cleanups   Linus Walleij
• [PATCH 0/3] Add generic idle notifiers   Todd Poynor
• [PATCH 2/4] mmci: adjust calculation of f_min   Linus Walleij
• [PATCH] mmci: adjust calculation of f_min   Linus Walleij
• [GIT PULL] omap board updates for v3.1 merge window   Arnd Bergmann
• reply: [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for?imx23/imx28   Uwe Kleine-König
• [PATCH] ARM: get rid of a few StrongARM cache-related build time constants   Russell King - ARM Linux
• reply: [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for?imx23/imx28   Arnd Bergmann
• [RFC PATCH 16/17] ARM: PM: enhance idle pm notifiers   Colin Cross
• [RFC/RFT 1/2] gpio/basic_mmio: add support for enable register   Ryan Mallon
• [PATCH v3 03/13] OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros   Paul Walmsley
• [PATCH v3 03/13] OMAP4: hwmod: Replace CLKCTRL absolute address with offset macros   Paul Walmsley
• [RFC PATCH 13/17] ARM: mm: L2x0 save/restore support   Colin Cross
• [PATCH v2] OMAP: omap_device: Create clkdev entry for hwmod main_clk   Paul Walmsley
• [PATCH] ARM: omap2: cm-t3730: convert boot_params to atag_offset   Igor Grinberg
• [PATCH 0/3] Add generic idle notifiers   Kevin Hilman
• [PATCH 0/7] Re-organize linker layouts   Russell King - ARM Linux
• [PATCH v4 3/7] OMAP2+: PM: Initialise sleep_switch to a non-valid value   Paul Walmsley
• [PATCH v4 4/7] OMAP2+: PM: idle clkdms only if already in idle   Paul Walmsley
• [PATCH v4 00/18] I2C: OMAP: I2C fixes, removal of cpu_is... from driver   Ben Dooks
• [PATCH] ARM: get rid of a few StrongARM cache-related build time constants   Nicolas Pitre
• [PATCH] net/fec: gasket needs to be enabled for some i.mx   Shawn Guo
• [PATCH 0/7] Re-organize linker layouts   Stephen Boyd
• [PATCH 01/17] ARM: proc: add definition of cpu_reset for ARMv6 and ARMv7 cores   Santosh Shilimkar
• [PATCH 02/17] ARM: Add cpu power management notifiers   Santosh Shilimkar
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   david at lang.hm
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Santosh Shilimkar
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Colin Cross
• [PATCH 1/2] dt: add helper function to read u32 arrays   Shawn Guo
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Santosh Shilimkar
• [RFC PATCH 06/17] ARM: kernel: save/restore generic infrastructure   Santosh Shilimkar
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Santosh Shilimkar
• [RFC PATCH 12/17] ARM: kernel: add SCU reset hook   Santosh Shilimkar
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [RFC PATCH 13/17] ARM: mm: L2x0 save/restore support   Santosh Shilimkar
• [RFC PATCH 14/17] ARM: kernel: save/restore 1:1 page tables   Santosh Shilimkar
• [RFC PATCH 17/17] ARM: kernel: save/restore build infrastructure   Santosh Shilimkar
• [PATCH 0/3] *** add lost UL suffix to VMALLOC_END ***   Barry Song
• [PATCH 1/3] ARM: CNS3XXX: add UL suffix to VMALLOC_END to ensure it is properly typed   Barry Song
• [PATCH 2/3] ARM: LPC32XXX: add UL suffix to VMALLOC_END to ensure it is properly typed   Barry Song
• [PATCH 3/3] ARM: NUC93X: add UL suffix to VMALLOC_END to ensure it is properly typed   Barry Song
• [PATCH 16/17] mach-sa1100: retire custom LED code   Bryan Wu
• [PATCH V5 0/3] pxa3xx_nand: add two chip select support   Lei Wen
• [PATCH 1/3] MTD: pxa3xx_nand: convert all printk into dev_*   Lei Wen
• [PATCH 2/3] MTD: pxa3xx_nand: sperate each chip individual info   Lei Wen
• [PATCH 3/3] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH v6 0/4] add the GPMI-NAND support for imx23/imx28   Huang Shijie
• [PATCH v6 1/4] ARM: mxs: add GPMI-NAND support for imx23/imx28   Huang Shijie
• [PATCH v6 2/4] ARM: mxs: add new a pad control   Huang Shijie
• [PATCH v6 3/4] ARM: mxs/mx23evk: add GPMI-NAND device   Huang Shijie
• [PATCH v6 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Huang Shijie
• [next][bug] rcu_dyntick_kick_cpu() kills ARM SMP.   Paul E. McKenney
• [PATCH 2/4] arm: plat-s3c24xx: dma: drop return codes in void function   Kukjin Kim
• [PATCH 1/4] arm: plat-s3c24xx: dma: don't use uninitialized variable   Kukjin Kim
• [PATCH 1/2] arch: arm: Correct the dependency of HAVE_ARM_TWD   Tommy Lin
• [PATCH 2/2] arch: arm: CNS3xxx select the correct CPU type CPU_V6K   Tommy Lin
• [PATCH 4/4] arm: mach-s3c2440: mini2440: fix section mismatch   Kukjin Kim
• [PATCH] ARM: cns3xxx: Add support for L2 Cache Controller   Tommy Lin
• [GIT PULL] i.MX feature additions   Sascha Hauer
• [PATCH v2 3/6] OMAP4: PRCM: OMAP4460 specific PRM and CM register bitshifts   Paul Walmsley
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Paul Walmsley
• [PATCH v2 1/6] OMAP: ID: introduce chip detection for OMAP4460   Paul Walmsley
• [PATCH v2 2/6] OMAP4: ID: add omap_has_feature for max freq supported   Paul Walmsley
• [PATCH v2 4/6] OMAP4: clocks: Update the clock tree with 4460 clock nodes   Paul Walmsley
• [PATCH v2 6/6] OMAP4: clockdomain: Reuse on 4460 using CHIP_IS_44XX   Paul Walmsley
• [PATCH v2 5/6] OMAP4: powerdomain: Reuse on 4460 using CHIP_IS_44XX   Paul Walmsley
• [PATCH v6 1/4] ARM: mxs: add GPMI-NAND support for imx23/imx28   Uwe Kleine-König
• [PATCH v6 1/4] ARM: mxs: add GPMI-NAND support for imx23/imx28   Huang Shijie
• [PATCH v2 3/6] OMAP4: PRCM: OMAP4460 specific PRM and CM register bitshifts   Rajendra Nayak
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Kukjin Kim
• [PATCH v2 4/6] OMAP4: clocks: Update the clock tree with 4460 clock nodes   Rajendra Nayak
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Paul Walmsley
• [PATCH V2 3/8] ARM: EXYNOS4: Add support PM with external GIC   Kukjin Kim
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Rajendra Nayak
• [BUGFIX][PATCH] iomux-mx53: add missing 'IOMUX_CONFIG_SION' for some I2C pad definitions   Lothar Waßmann
• [PATCH v6 2/4] ARM: mxs: add new a pad control   Uwe Kleine-König
• mx25 gpt-clock issue, waits are too long   Baruch Siach
• [PATCH v6 2/4] ARM: mxs: add new a pad control   Huang Shijie
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Uwe Kleine-König
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Tony Lindgren
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Paul Walmsley
• [PATCH v2 3/6] OMAP4: PRCM: OMAP4460 specific PRM and CM register bitshifts   Paul Walmsley
• [PATCH v2 4/6] OMAP4: clocks: Update the clock tree with 4460 clock nodes   Paul Walmsley
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Huang Shijie
• [PATCH v2 0/4] OMAP4: Add modulemode support to hwmod framework (part 2)   Paul Walmsley
• [RFC PATCH 00/17] ARM: common idle infrastructure   Lorenzo Pieralisi
• [PATCH 2/7] DMA: PL330: Update PL330 DMA API driver   Kukjin Kim
• [RFC] dmaengine: Moving TI SDMA driver to dmaengine - design plan   Raju, Sundaram
• [PATCH 01/17] ARM: proc: add definition of cpu_reset for ARMv6 and ARMv7 cores   Will Deacon
• [RFC PATCH 13/17] ARM: mm: L2x0 save/restore support   Lorenzo Pieralisi
• [PATCH 0/6] Add device tree support for imx spi driver   Shawn Guo
• [PATCH 1/6] ARM: mxc: remove unnecessary header file inclusion from gpio.h   Shawn Guo
• [PATCH 2/6] spi/imx: use soc name in spi device type naming scheme   Shawn Guo
• [PATCH 3/6] spi/imx: copy gpio number passed by platform data into driver private data   Shawn Guo
• [PATCH 4/6] dt: add helper function to read u32 arrays   Shawn Guo
• [PATCH 5/6] dt: add empty of_property_read_u32[_array] for non-dt   Shawn Guo
• [PATCH 6/6] spi/imx: add device tree probe support   Shawn Guo
• [GIT PULL] omap board updates for v3.1 merge window   Tony Lindgren
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Lorenzo Pieralisi
• [GIT PULL] omap board updates for v3.1 merge window   Arnd Bergmann
• [RFC PATCH v2 0/4] Core device subsystem   Marc Zyngier
• [RFC PATCH v2 1/4] dt: expose device resource allocator   Marc Zyngier
• [RFC PATCH v2 2/4] Core device subsystem implementation   Marc Zyngier
• [RFC PATCH v2 3/4] Core devices: add OF interrupt controller sorting method   Marc Zyngier
• [RFC PATCH v2 4/4] Core devices: documentation   Marc Zyngier
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Russell King - ARM Linux
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Arnd Bergmann
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [RFC PATCH 16/17] ARM: PM: enhance idle pm notifiers   Lorenzo Pieralisi
• [GIT PULL] DaVinci cleanups for v3.1   Nori, Sekhar
• [PATCH 0/7] Re-organize linker layouts   Russell King - ARM Linux
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Uwe Kleine-König
• [PATCH 1/2] arch: arm: Correct the dependency of HAVE_ARM_TWD   Anton Vorontsov
• [PATCH 4/4] arm: mach-s3c2440: mini2440: fix section mismatch   Russell King - ARM Linux
• [GIT PULL] DaVinci features for v3.1   Nori, Sekhar
• [PATCH 0/3] *** add lost UL suffix to VMALLOC_END ***   Russell King - ARM Linux
• [PATCH 2/2] arch: arm: CNS3xxx select the correct CPU type CPU_V6K   Anton Vorontsov
• [PATCH 1/2] arch: arm: Correct the dependency of HAVE_ARM_TWD   Russell King - ARM Linux
• [PATCH 4/4] arm: mach-s3c2440: mini2440: fix section mismatch   Kukjin Kim
• [PATCH 6/7] spi/s3c64xx: Add support DMA engine API   Kukjin Kim
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Huang Shijie
• [PATCHv2] remove unnecessary cache flush on v6 copypage   Russell King - ARM Linux
• [PATCH v2 1/5] dt: add of_alias_scan and of_alias_get_id   Shawn Guo
• [PATCH v5 0/3] ARM: CSR: Adding CSR SiRFprimaII platform   Barry Song
• [PATCH v5 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Barry Song
• [PATCH v5 2/3] ARM: CSR: mapping early DEBUG_LL uart   Barry Song
• [PATCH v5 3/3] ARM: CSR: initializing L2 cache   Barry Song
• [PATCH] ARM: EXYNOS4: Add support AFTR mode on EXYNOS4210   Jaecheol Lee
• [RFC PATCH 12/17] ARM: kernel: add SCU reset hook   Lorenzo Pieralisi
• [PATCHv2] remove unnecessary cache flush on v6 copypage   Catalin Marinas
• [RFC] dmaengine: Moving TI SDMA driver to dmaengine - design plan   Russell King - ARM Linux
• [PATCH 0/3] ARM:OMAP4 add Phytec phyCORE-OMAP4 board   Jan Weitzel
• [PATCH 1/3] ARM: OMAP4: Add pcm049 to Kconfig/Makefile   Jan Weitzel
• [PATCH 2/3] ARM: OMAP4: add pcm049 DEBUGLL   Jan Weitzel
• [PATCH 3/3] ARM: OMAP4: platformcode board-omap4pcm049.c   Jan Weitzel
• [RFC] dmaengine: Moving TI SDMA driver to dmaengine - design plan   Raju, Sundaram
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Uwe Kleine-König
• [PATCH] net/fec: gasket needs to be enabled for some i.mx   Sascha Hauer
• [PATCH 1/7] DMA: PL330: Add support runtime PM for PL330 DMAC   Kukjin Kim
• [RFC PATCH v2 2/4] Core device subsystem implementation   Michał Mirosław
• [PATCH] ARM: mmp: remove SPARSE_IRQ for mmp   Haojian Zhuang
• [PATCH] ARM: mmp: remove builtin gpio driver support   Haojian Zhuang
• [PATCH] ARM: mmp: parse irq from DT   Haojian Zhuang
• [PATCH] ARM: mmp: support OF by default   Haojian Zhuang
• [PATCH] tty: serial: support device tree in pxa   Haojian Zhuang
• [PATCH] tty: serial: check ops before registering console   Haojian Zhuang
• [PATCH] i2c: pxa: create dynamic platform device from device tree   Haojian Zhuang
• [PATCH] of: add devicetree API for regulator   Haojian Zhuang
• [PATCH] regulator: convert devicetree to platform data on max8649   Haojian Zhuang
• [PATCH] mfd: convert devicetree to platform data on max8925   Haojian Zhuang
• [PATCH] mfd: convert devicetree to platform on 88pm860x   Haojian Zhuang
• [PATCH] ARM: mmp: add DTS file   Haojian Zhuang
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Lothar Waßmann
• [GIT PULL] omap board updates for v3.1 merge window   Tony Lindgren
• [RFC] dmaengine: Moving TI SDMA driver to dmaengine - design plan   Tony Lindgren
• [RFC PATCH v2 2/4] Core device subsystem implementation   Marc Zyngier
• [RFC PATCH 06/17] ARM: kernel: save/restore generic infrastructure   Lorenzo Pieralisi
• [PATCH v3 0/3] Add device tree probe for imx/mxc gpio   Sascha Hauer
• [GIT PULL] DaVinci features for v3.1   Sergei Shtylyov
• [PATCH] ARM: OMAP2+ Add Primview dispalys to panel-generic   Jan Weitzel
• [RFC PATCH 14/17] ARM: kernel: save/restore 1:1 page tables   Lorenzo Pieralisi
• [PATCH v2 1/6] OMAP: ID: introduce chip detection for OMAP4460   Tony Lindgren
• [PATCH v2 3/6] OMAP4: PRCM: OMAP4460 specific PRM and CM register bitshifts   Tony Lindgren
• [PATCH v2 4/6] OMAP4: clocks: Update the clock tree with 4460 clock nodes   Tony Lindgren
• [RFC PATCH 13/17] ARM: mm: L2x0 save/restore support   Lorenzo Pieralisi
• [PATCH 2/6] spi/imx: use soc name in spi device type naming scheme   Sascha Hauer
• [PATCH v4 10/40] ARM: mm: proc-arm1020: Use the new processor struct macros   Sergei Shtylyov
• [GIT PULL] omap board updates for v3.1 merge window   Arnd Bergmann
• [PATCH v4 10/40] ARM: mm: proc-arm1020: Use the new processor struct macros   Dave Martin
• [PATCH 0/3] Add generic idle notifiers   Russell King - ARM Linux
• [GIT PULL] omap board updates for v3.1 merge window   Tony Lindgren
• [GIT PULL] DaVinci cleanups for v3.1   Arnd Bergmann
• [RFC PATCH v2 0/4] Core device subsystem   Michał Mirosław
• ARM cortex A9 performance issue   rd bairva
• [PATCH 1/3] ARM: OMAP4: Add pcm049 to Kconfig/Makefile   Sergei Shtylyov
• [GIT PULL] omap fix for v3.0   Tony Lindgren
• [PATCH 1/3] ARM: OMAP4: Add pcm049 to Kconfig/Makefile   Tony Lindgren
• [PATCH 1/3] ARM: OMAP4: Add pcm049 to Kconfig/Makefile   Felipe Balbi
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Russell King - ARM Linux
• [PATCH v2] ARM:OMAP4 add Phytec phyCORE-OMAP4 board   Jan Weitzel
• [PATCH 1/2] SPI: S5PC100: Enable the SPI driver for S5PC100   Padmavathi Venna
• [PATCH 2/2] SPI: S5PV210: Enable the SPI driver for S5PV210   Padmavathi Venna
• [PATCH] mach-imx: imx27pdk (3ds): add nand flash support   Jürgen Lambrecht
• [PATCH 5/6] dt: add empty of_property_read_u32[_array] for non-dt   Rob Herring
• [PATCHv2] remove unnecessary cache flush on v6 copypage   heechul Yun
• [GIT PULL] omap twl cleanup for v3.1 merge window   Tony Lindgren
• [RFC PATCH v2 0/4] Core device subsystem   Marc Zyngier
• [PATCH 46/52] ARM: mach-u300: convert boot_params to atag_offset   Linus Walleij
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Tony Lindgren
• [PATCH 47/52] ARM: mach-ux500: convert boot-params to atag_offset   Linus Walleij
• [RFC PATCH] ASoC: codecs: add codec driver for MFD mc13783   Jürgen Lambrecht
• [RFC PATCH] ARM ASoC: add sound driver for imx27pdk using mc13783 codec   Jürgen Lambrecht
• [RFC PATCH] ARM: imx27pdk (3ds): enable m13783 codec over SSI   Jürgen Lambrecht
• ARM cortex A9 performance issue   Dave Martin
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Nicolas Pitre
• [PATCH 0/7] Re-organize linker layouts   Nicolas Pitre
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   John Linn
• [RFC PATCH] ARM ASoC: add sound driver for imx27pdk using mc13783 codec   Philippe Rétornaz
• [RFC PATCH] ARM ASoC: add sound driver for imx27pdk using mc13783 codec   Lambrecht Jürgen
• [PATCH v4 3/7] OMAP2+: PM: Initialise sleep_switch to a non-valid value   Kevin Hilman
• [PATCH v4 4/7] OMAP2+: PM: idle clkdms only if already in idle   Kevin Hilman
• [PATCH v2 0/2] mc13783: add pwr button support   Philippe Rétornaz
• [PATCH 1/2] mc13783: add power button support   Philippe Rétornaz
• [PATCH 2/2] mx31moboard: Add MC13783 power button support   Philippe Rétornaz
• [RFC PATCH 09/11] arm/dt: Add dt machine definition   Rob Herring
• [PATCH 1/2] mc13783: add power button support   Uwe Kleine-König
• [PATCH 1/2] mc13783: add power button support   Philippe Rétornaz
• [PATCH] ARM: mmp: remove SPARSE_IRQ for mmp   Grant Likely
• [PATCH] of: add devicetree API for regulator   Grant Likely
• [PATCH V5 5/6] pxa3xx_nand: mtd scan id process could be defined by driver itself   Lei Wen
• [PATCH 2/6] pxa3xx_nand: rework irq logic   Lei Wen
• [Qualcomm PM8921 MFD 4/6] mfd: pm8xxx-mpp: Add pm8xxx MPP driver   Greg KH
• [RFC PATCH v2 0/4] Core device subsystem   Marc Zyngier
• [PATCH v4 00/18] I2C: OMAP: I2C fixes, removal of cpu_is... from driver   Kevin Hilman
• [RFC PATCH 17/17] ARM: kernel: save/restore build infrastructure   Lorenzo Pieralisi
• [PATCH] DaVinci: correct MDSTAT_STATE_MASK   Sergei Shtylyov
• [GIT PULL] DaVinci features for v3.1   Arnd Bergmann
• [PATCH 1/2] mc13783: add power button support   Uwe Kleine-König
• [PATCH v8 6/7] omap3: nand: ecc layout select from board file   Sukumar Ghorai
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH] DaVinci: correct MDSTAT_STATE_MASK   Sergei Shtylyov
• [PATCH 2/3] ts72xx: use MTDPART_OFS_RETAIN for mtd partitioning   Petr Štetiar
• [PATCH] MTD: atmel_nand: Add DMA support to access Nandflash   Ryan Mallon
• [GIT PULL] omap twl cleanup for v3.1 merge window   Arnd Bergmann
• [Qualcomm PM8921 MFD 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   Greg KH
• [RFC PATCH] ASoC: codecs: add codec driver for MFD mc13783   Sascha Hauer
• [PATCH 0/3] *** add lost UL suffix to VMALLOC_END ***   Arnd Bergmann
• [PATCH 00/10] ARM: mxs: add audio support   Dong Aisheng
• [PATCH 01/10] ASoc: mxs: add mxs-pcm driver   Dong Aisheng
• [PATCH 02/10] ASoc: mxs: add mxs-saif driver   Dong Aisheng
• [PATCH 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Dong Aisheng
• [PATCH 04/10] ASoc: mxs: add asoc configuration files   Dong Aisheng
• [PATCH 05/10] ARM: mxs: add saif clock   Dong Aisheng
• [PATCH 06/10] ARM: mxs: add saif device   Dong Aisheng
• [PATCH 07/10] ARM: mxs: add sgtl5000 i2c device   Dong Aisheng
• [PATCH 08/10] ARM: mxs: add mxs-sgtl5000 device   Dong Aisheng
• [PATCH 09/10] ARM: mxs: correct the using of frac div for saif   Dong Aisheng
• [PATCH 10/10] ARM: mxs-dma: include <linux/dmaengine.h>   Dong Aisheng
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH 1/1] mtd: msm_nand: Add initial msm nand driver support.   Murali Nalajala
• [PATCH 2/2] mtd: msm_nand: Add initial msm nand driver support.   Artem Bityutskiy
• [PATCH 0/7] Re-organize linker layouts   Russell King - ARM Linux
• Please submit platform trees for inclusion in arm-soc.git v3.1   Kevin Hilman
• [PATCH V5 2/6] pxa3xx_nand: rework irq logic   Lei Wen
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Igor Grinberg
• [PATCH 16/17] mach-sa1100: retire custom LED code   Jochen Friedrich
• [PATCH 0/3] OMAP2+: hwmod_data: I2C updates for v3.1   Kevin Hilman
• [PATCH 1/3] I2C: OMAP2+: Set hwmod flags to only allow 16-bit accesses to i2c   Kevin Hilman
• [PATCH 2/3] I2C: OMAP2+: Tag all OMAP2+ hwmod defintions with I2C IP revision   Kevin Hilman
• [PATCH 3/3] I2C: OMAP2+: add correct functionality flags to all omap2plus i2c dev_attr   Kevin Hilman
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Frank Hofmann
• [PULL] arm-soc fixes for 3.0   Arnd Bergmann
• [PATCH 02/10] ASoc: mxs: add mxs-saif driver   Sascha Hauer
• [GIT PULL] OMAP I2C cleanups for v3.1   Kevin Hilman
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Russell King - ARM Linux
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Russell King - ARM Linux
• [RFC PATCH] ASoC: codecs: add codec driver for MFD mc13783   Fabio Estevam
• [PATCH 1/8] mtd: nand: remove NAND_BBT_SCANBYTE1AND6 option   Brian Norris
• [RFC 1/6]Fix typo "recieve" in various parts of the kernel.   Justin P. Mattock
• [PATCH 4/7] add GPMI support for imx23   Huang Shijie
• [PATCH] MTD: m25p80: add debugging trace in sst_write()   Nicolas Ferre
• [PATCH] MTD: atmel_nand: Add DMA support to access Nandflash   Hong Xu
• [PATCH] arm: fix oops in sched_clock_poll   Russell King - ARM Linux
• [PATCH V3 4/6] MTD : add the common code for GPMI controller driver   Huang Shijie
• [PATCH V2 2/2] mtd: msm_nand: Add initial msm nand driver support.   Murali Nalajala
• [RFC PATCH v4] Consolidate SRAM support   Nori, Sekhar
• [PATCH 0/7] Re-organize linker layouts   Stephen Boyd
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Rajendra Nayak
• [RFC PATCH v4] Consolidate SRAM support   Nori, Sekhar
• [RFC] dmaengine: Moving TI SDMA driver to dmaengine - design plan   Linus Walleij
• [PATCH 16/17] mach-sa1100: retire custom LED code   Russell King - ARM Linux
• [PATCH 02/10] ASoc: mxs: add mxs-saif driver   Wolfram Sang
• [Qualcomm PM8921 MFD 3/6] gpio: pm8xxx-gpio: Add pm8xxx gpio driver   Abhijeet Dharmapurikar
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Russell King - ARM Linux
• [PATCH] MTD: atmel_nand: Add DMA support to access Nandflash   Hong Xu
• [PATCH] ATMEL, AVR32: inline nand partition table access   Dmitry Eremin-Solenikov
• [PATCH] omap3: nand: bch ecc support added   Ghorai, Sukumar
• [ PATCH V2 5/7] MTD : add GPMI support for imx23   Huang Shijie
• [PATCH] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH RESEND v8 4/7] omap3: nand: prefetch in irq mode support   Sukumar Ghorai
• [PATCH 1/1] mtd: msm_nand: Add initial msm nand driver support.   Murali Nalajala
• [PATCH] omap3: nand: bch ecc support added   Vimal Singh
• [PATCH v9 6/7] omap3: nand: ecc layout select from board file   Sukumar Ghorai
• [PATCH V4 2/4] MTD : add the common code for GPMI controller driver   Huang Shijie
• [PATCH v8 4/7] omap3: nand: prefetch in irq mode support   Sukumar Ghorai
• [PATCH v4 2/2] ARM: l2x0: Add OF based initialization   Rob Herring
• [PATCH 1/2] ARM: mx25: Fix typo on CAN1_RX pad setting   Fabio Estevam
• [PATCH 2/2] ARM: mach-imx/mx25_3ds: Add FlexCAN support   Fabio Estevam
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Nicolas Pitre
• [PATCH 6/7] ARM / Samsung: Use struct syscore_ops for "core" power management   Rafael J. Wysocki
• [RFC PATCH v2 0/4] Core device subsystem   Michał Mirosław
• [PATCH] ARM: EXYNOS4: Add support AFTR mode on EXYNOS4210   Russell King - ARM Linux
• [RFC PATCH v2 4/4] Core devices: documentation   Randy Dunlap
• [PATCH v5 2/4] MTD : add the common code for GPMI controller driver   Huang Shijie
• [PATCH 2/2] mtd: msm_nand: Add initial msm nand driver support.   Murali Nalajala
• [PATCH 0/7] Re-organize linker layouts   Nicolas Pitre
• [PATCH v5 1/4] ARM: add GPMI support for imx23/imx28   Huang Shijie
• I have disabled my mailing list subscriptions   Russell King - ARM Linux
• [PATCH] of: add devicetree API for regulator   Liam Girdwood
• [PATCH 02/10] ASoc: mxs: add mxs-saif driver   Dong Aisheng
• [RFC PATCH v2 0/4] Core device subsystem   Michał Mirosław
• [PATCH] net/fec: gasket needs to be enabled for some i.mx   Troy Kisky
• [PATCH v3 0/3] Add device tree probe for imx/mxc gpio   Grant Likely
• [PATCH 5/6] dt: add empty of_property_read_u32[_array] for non-dt   Grant Likely
• [PATCH] ARM: support XZ compressed kernels   Imre Kaloz
• [PATCH 0/6] Add device tree support for imx spi driver   Grant Likely
• [PATCH v6 1/4] ARM: mxs: add GPMI-NAND support for imx23/imx28   Wolfram Sang
• [PATCH v6 00/18] ARM: Add support for the Large Physical Address Extensions   Russell King - ARM Linux
• [PATCH v8 03/14] ARM: smp_twd: add support for remapped PPI interrupts   Russell King - ARM Linux
• [PATCH v8 14/14] ARM: gic: add gic_ppi_map_on_cpu()   Russell King - ARM Linux
• [PATCH 05/17] mach-ks8695: remove leds driver, since nobody use it   Andrew Victor
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Russell King - ARM Linux
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Russell King - ARM Linux
• [PATCH] ARM: support XZ compressed kernels   Russell King - ARM Linux
• [PATCH 4/5] DRM: Add support for the sii902x HDMI/DVI encoder   Alex Deucher
• [PATCH] ARM: support XZ compressed kernels   Imre Kaloz
• [PATCH 4/5] DRM: Add support for the sii902x HDMI/DVI encoder   Michał Mirosław
• [PATCH] ARM: support XZ compressed kernels   Russell King - ARM Linux
• Ooops with 2.6.39.2 on pxa270   Vasily Khoruzhick
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Nicolas Pitre
• [PATCH 46/52] ARM: mach-u300: convert boot_params to atag_offset   Russell King - ARM Linux
• [PATCH] ARM: support XZ compressed kernels   Imre Kaloz
• [PATCH 07/15] pxa25x_udc: drop support for udc_command   Greg KH
• [PATCH] tty/serial: tegra: Use engineering names in DT compatible property   Greg KH
• [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Arnd Bergmann
• [PATCH 07/15] pxa25x_udc: drop support for udc_command   Felipe Balbi
• PL330 alignment requirement questions   johnlinn at comcast.net
• [PATCH 07/15] pxa25x_udc: drop support for udc_command   Greg KH
• PL330 alignment requirement questions   Rob Herring
• PL330 alignment requirement questions   johnlinn at comcast.net
• [PATCH 07/15] pxa25x_udc: drop support for udc_command   Felipe Balbi
• [PATCH 0/3] OMAP2+: hwmod_data: I2C updates for v3.1   Paul Walmsley
• [PATCH v5 2/2] OMAP: hwmod: fix the i2c-reset timeout during bootup   Paul Walmsley
• [PATCH v4 1/7] OMAP2+: clockdomain: Add an api to read idle mode   Paul Walmsley
• [PATCH] of: add devicetree API for regulator   Mark Brown
• [GIT PULL] CSR SiRFprimaII board support for v3.1   Barry Song
• PL330 alignment requirement questions   Jassi Brar
• [PATCH] of: add devicetree API for regulator   Mark Brown
• [RFC PATCH] ARM ASoC: add sound driver for imx27pdk using mc13783 codec   Mark Brown
• [PATCH 01/10] ASoc: mxs: add mxs-pcm driver   Mark Brown
• [GIT PULL] Samsung fixes for 3.0-rc7   Kukjin Kim
• [PATCH 02/10] ASoc: mxs: add mxs-saif driver   Mark Brown
• [PATCH 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Mark Brown
• [PATCH 04/10] ASoc: mxs: add asoc configuration files   Mark Brown
• [RFC PATCH v2 2/4] Core device subsystem implementation   Greg KH
• [RFC PATCH v2 0/4] Core device subsystem   Greg KH
• [PATCH] net/fec: gasket needs to be enabled for some i.mx   Shawn Guo
• [PATCH] net/fec: gasket needs to be enabled for some i.mx   Shawn Guo
• [PATCH v3 0/3] Add device tree probe for imx/mxc gpio   Shawn Guo
• [PATCH 0/6] Add device tree support for imx spi driver   Shawn Guo
• [PATCH 2/6] spi/imx: use soc name in spi device type naming scheme   Shawn Guo
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Russell King - ARM Linux
• [PATCH 01/10] ARM: change ARM_DMA_ZONE_SIZE into a variable   Russell King - ARM Linux
• [PATCH v4 7/7] OMAP2+: hwmod: Follow the recommended PRCM module enable sequence   Paul Walmsley
• [PATCH v2 3/5] ARM: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM   Petr Štetiar
• [PATCH v2 3/5] ARM: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM   Russell King - ARM Linux
• [PATCH v2 17/18] OMAP4: hwmod data: Modify DSS opt clocks   Paul Walmsley
• [PATCH v2 17/18] OMAP4: hwmod data: Modify DSS opt clocks   Paul Walmsley
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Russell King - ARM Linux
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Russell King - ARM Linux
• [PATCH 07/15] pxa25x_udc: drop support for udc_command   Dmitry Eremin-Solenikov
• [RFC PATCH 06/17] ARM: kernel: save/restore generic infrastructure   Russell King - ARM Linux
• [PATCH 01/17] ARM: proc: add definition of cpu_reset for ARMv6 and ARMv7 cores   Russell King - ARM Linux
• [PATCH 02/17] ARM: Add cpu power management notifiers   Russell King - ARM Linux
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Russell King - ARM Linux
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Mark Brown
• [PATCH 04/17] ARM: vfp: Use cpu pm notifiers to save vfp state   Russell King - ARM Linux
• ARM: kprobes: Add support for Thumb-2   Tixy
• [PATCH 01/51] ARM: Thumb-2: Fix exception return sequence to restore stack correctly   Tixy
• [PATCH 02/51] ARM: Thumb-2: Support Thumb-2 in undefined instruction handler   Tixy
• [PATCH 03/51] ARM: kprobes: Rename kprobes-decode.c to kprobes-arm.c   Tixy
• [PATCH 04/51] ARM: kprobes: Split out internal parts of kprobes.h   Tixy
• [PATCH 05/51] ARM: kprobes: Add kprobes-common.c   Tixy
• [PATCH 06/51] ARM: kprobes: Move is_writeback define to header file.   Tixy
• [PATCH 07/51] ARM: kprobes: Move find_str_pc_offset into kprobes-common.c   Tixy
• [PATCH 08/51] ARM: kprobes: Make str_pc_offset a constant on ARMv7   Tixy
• [PATCH 09/51] ARM: kprobes: Make kprobes framework work on Thumb-2 kernels   Tixy
• [PATCH 10/51] ARM: kprobes: Add Thumb instruction decoding stubs   Tixy
• [PATCH 11/51] ARM: Kconfig: Allow kprobes on Thumb-2 kernels   Tixy
• [PATCH 12/51] ARM: kprobes: Add Thumb breakpoint support   Tixy
• [PATCH 13/51] ARM: kprobes: Add condition code checking to Thumb emulation   Tixy
• [PATCH 14/51] ARM: kprobes: Add it_advance()   Tixy
• [PATCH 15/51] ARM: kprobes: Don't trigger probes on conditional instructions when condition is false   Tixy
• [PATCH 16/51] ARM: kprobes: Use conditional breakpoints for ARM probes   Tixy
• [PATCH 17/51] ARM: kprobes: Add hooks to override singlestep()   Tixy
• [PATCH 18/51] ARM: kprobes: Extend arch_specific_insn to add pointer to emulated instruction   Tixy
• [PATCH 19/51] ARM: kprobes: Infrastructure for table driven decoding of CPU instructions   Tixy
• [PATCH 20/51] ARM: kprobes: Decode 16-bit Thumb hint instructions   Tixy
• [PATCH 21/51] ARM: ptrace: Add APSR_MASK definition to ptrace.h   Tixy
• [PATCH 22/51] ARM: kprobes: Decode 16-bit Thumb data-processing instructions   Tixy
• [PATCH 23/51] ARM: kprobes: Add bx_write_pc()   Tixy
• [PATCH 24/51] ARM: kprobes: Decode 16-bit Thumb BX and BLX instructions   Tixy
• [PATCH 25/51] ARM: kprobes: Decode 16-bit Thumb special data instructions   Tixy
• [PATCH 26/51] ARM: kprobes: Decode 16-bit Thumb load and store instructions   Tixy
• [PATCH 27/51] ARM: kprobes: Decode 16-bit Thumb PC- and SP-relative address instructions   Tixy
• [PATCH 28/51] ARM: kprobes: Decode 16-bit Thumb CBZ and bit manipulation instructions   Tixy
• [PATCH 29/51] ARM: kprobes: Decode 16-bit Thumb PUSH and POP instructions   Tixy
• [PATCH 30/51] ARM: kprobes: Decode 16-bit Thumb IT instruction   Tixy
• [PATCH 31/51] ARM: kprobes: Reject 16-bit Thumb SVC and UNDEFINED instructions   Tixy
• [PATCH 32/51] ARM: kprobes: Decode 16-bit Thumb branch instructions   Tixy
• [PATCH 33/51] ARM: kprobes: Reject 16-bit Thumb SETEND, CPS and BKPT instructions   Tixy
• [PATCH 34/51] ARM: kprobes: Decode 32-bit Thumb hint instructions   Tixy
• [PATCH 35/51] ARM: kprobes: Add load_write_pc()   Tixy
• [PATCH 36/51] ARM: kprobes: Add common decoding function for LDM and STM   Tixy
• [PATCH 37/51] ARM: kprobes: Optimise emulation of LDM and STM   Tixy
• [PATCH 38/51] ARM: kprobes: Decode 32-bit Thumb load/store multiple instructions   Tixy
• [PATCH 39/51] ARM: kprobes: Decode 32-bit Thumb load/store dual and load/store exclusive instructions   Tixy
• [PATCH 40/51] ARM: kprobes: Decode 32-bit Thumb table branch instructions   Tixy
• [PATCH 41/51] ARM: kprobes: Decode 32-bit Thumb data-processing (shifted register) instructions   Tixy
• [PATCH 42/51] ARM: kprobes: Decode 32-bit Thumb data-processing (modified immediate) instructions   Tixy
• [PATCH 43/51] ARM: kprobes: Decode 32-bit Thumb data-processing (plain binary immediate) instructions   Tixy
• [PATCH 44/51] ARM: kprobes: Decode 32-bit miscellaneous control instructions   Tixy
• [PATCH 45/51] ARM: kprobes: Decode 32-bit Thumb branch instructions   Tixy
• [PATCH 46/51] ARM: kprobes: Reject 32-bit Thumb coprocessor and SIMD instructions   Tixy
• [PATCH 47/51] ARM: kprobes: Decode 32-bit Thumb memory hint instructions   Tixy
• [PATCH 48/51] ARM: kprobes: Decode 32-bit Thumb load/store single data item instructions   Tixy
• [PATCH 49/51] ARM: kprobes: Decode 32-bit Thumb data-processing (register) instructions   Tixy
• [PATCH 50/51] ARM: kprobes: Decode 32-bit Thumb long multiply and divide instructions   Tixy
• [PATCH 51/51] ARM: kprobes: Decode 32-bit Thumb multiply and absolute difference instructions   Tixy
• [PATCH 04/17] ARM: vfp: Use cpu pm notifiers to save vfp state   Russell King - ARM Linux
• [PATCH 2/6] ARM: move ARCH_HAS_DMA_SET_COHERENT_MASK into memory.h   Rob Herring
• [Linaro-mm-sig] [PATCH 6/8] drivers: add Contiguous Memory Allocator   Janusz Krzysztofik
• [PATCH 2/6] ARM: move ARCH_HAS_DMA_SET_COHERENT_MASK into memory.h   Russell King - ARM Linux
• [PATCH 0/3] Fix VFP thread handling   Russell King - ARM Linux
• [PATCH 1/3] ARM: vfp: rename last_VFP_context to vfp_current_hw_state   Russell King - ARM Linux
• [PATCH 2/3] ARM: vfp: rename check_exception to vfp_hw_state_valid   Russell King - ARM Linux
• [PATCH 3/3] ARM: vfp: fix a hole in VFP thread migration   Russell King - ARM Linux
• [PATCH 4/3] ARM: vfp: ensure that thread flushing works if preempted   Russell King - ARM Linux
• [RFC PATCH v2 1/4] dt: expose device resource allocator   Grant Likely
• [PATCH v2 0/7] Add device tree support for imx spi driver   Shawn Guo
• [PATCH v2 1/7] spi/imx: do not make copy of spi_imx_devtype_data   Shawn Guo
• [PATCH v2 2/7] spi/imx: use mx21 to name SPI_IMX_VER_0_0 function and macro   Shawn Guo
• [PATCH v2 3/7] spi/imx: do not use spi_imx2_3 to name SPI_IMX_VER_2_3 function and macro   Shawn Guo
• [PATCH v2 4/7] spi/imx: merge type SPI_IMX_VER_0_7 into SPI_IMX_VER_0_4   Shawn Guo
• [PATCH v2 5/7] spi/imx: use soc name in spi device type naming scheme   Shawn Guo
• [PATCH v2 6/7] spi/imx: copy gpio number passed by platform data into driver private data   Shawn Guo
• [PATCH v2 7/7] spi/imx: add device tree probe support   Shawn Guo
• [RFC PATCH v2 2/4] Core device subsystem implementation   Grant Likely
• [PATCH V3] MMC: PM: add suspend/resume in atmel-mci   Chris Ball
• [PATCH 1/7] ARM: static should be at beginning of declaration   Jesper Juhl
• [RFC PATCH v2 3/4] Core devices: add OF interrupt controller sorting method   Grant Likely
• [PATCH] pxa2xx_spi: fix memory corruption   Vasily Khoruzhick
• [PATCH] OMAP2+: clock: allow per-SoC clock init code to prevent clockdomain calls from clock code   Paul Walmsley
• [RFC PATCH v2 4/4] Core devices: documentation   Grant Likely
• [PATCH 02/17] ARM: Add cpu power management notifiers   Colin Cross
• [PATCH] OMAP3+: SR: ensure pm-runtime callbacks can be invoked with IRQ disabled   Nishanth Menon
• [PATCH] tty/serial: tegra: Use engineering names in DT compatible property   Grant Likely
• [PATCH] MAINTAINERS: add Kevin Hilman as the omap_device maintainer   Paul Walmsley
• [PATCH v9 00/12] use nonblock mmc requests to minimize latency   Chris Ball
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Colin Cross
• [PATCH v3 0/4] Add device tree probe for sdhci-esdhc-imx   Chris Ball
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Russell King - ARM Linux
• [RFC/PATCH] OMAP PM: remove OMAP_PM_NONE config option   Paul Walmsley
• [PATCH] OMAP: omap_device: replace _find_by_pdev() with to_omap_device()   Paul Walmsley
• [PATCH 1/1] ARM: i.MX50/53: debug-macro: fix UART_PADDR   Troy Kisky
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Colin Cross
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Russell King - ARM Linux
• [PATCH] pxa2xx_spi: fix memory corruption   Marek Vasut
• [PATCH v3 0/3] mc13783: add pwr button support   Philippe Rétornaz
• [PATCH 1/3] mc13783: add power button support   Philippe Rétornaz
• [PATCH 2/3] mx31moboard: Add MC13783 power button support   Philippe Rétornaz
• [PATCH 3/3] mc13xxx: implicitly enable leds and buttons   Philippe Rétornaz
• [PATCH] pxa2xx_spi: fix memory corruption   Russell King - ARM Linux
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Colin Cross
• [PATCH] ARM: gic: Allow gic arch extensions to provide irqchip flags   Santosh Shilimkar
• [PATCH] ARM: gic: Allow gic arch extensions to provide irqchip flags   Colin Cross
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Santosh Shilimkar
• [PATCH] OMAP: dmtimer: add missing include   Paul Walmsley
• [PATCH v3 0/4] Add device tree probe for sdhci-esdhc-imx   Shawn Guo
• [PATCH v2 08/18] OMAP4: clock data: Rename clock flags from 443X to 44XX   Paul Walmsley
• [GIT PULL] OMAP: SoC data/core: cleanups for 3.1   Paul Walmsley
• [PATCH] ARM: mmp: remove builtin gpio driver support   Grant Likely
• [PATCH] ARM: mmp: parse irq from DT   Grant Likely
• [PATCH] tty: serial: support device tree in pxa   Grant Likely
• [PATCH] i2c: pxa: create dynamic platform device from device tree   Grant Likely
• [PATCH 01/10] ASoc: mxs: add mxs-pcm driver   Dong Aisheng
• [GIT PULL] omap twl cleanup for v3.1 merge window   Tony Lindgren
• [GIT PULL] minimal omap4460 support for v3.1 merge window   Tony Lindgren
• [PATCH] pxa2xx_spi: fix memory corruption   Marek Vasut
• [PATCH] mfd: convert devicetree to platform data on max8925   Grant Likely
• [PATCH] mfd: convert devicetree to platform on 88pm860x   Grant Likely
• [GIT PULL] OMAP: SoC data/core: fixes for 3.1   Paul Walmsley
• [PATCH] ARM: mmp: add DTS file   Grant Likely
• [PATCH] mtd: dataflash: add device tree probe support   Shawn Guo
• [PATCH] pxa2xx_spi: fix memory corruption   Marek Vasut
• [PATCH 3/3] mc13xxx: implicitly enable leds and buttons   Uwe Kleine-König
• [PATCH 02/10] ASoc: mxs: add mxs-saif driver   Dong Aisheng
• [PATCH 01/10] ASoc: mxs: add mxs-pcm driver   Mark Brown
• [PATCH 02/10] ASoc: mxs: add mxs-saif driver   Mark Brown
• [PATCH 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Dong Aisheng
• [PATCH 04/10] ASoc: mxs: add asoc configuration files   Dong Aisheng
• [PATCH 3/3] mc13xxx: implicitly enable leds and buttons   Mark Brown
• [PATCH 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Mark Brown
• function tracer on i.mx35 (pcm043)   Rabin Vincent
• [PATCH 02/10] ASoc: mxs: add mxs-saif driver   Dong Aisheng
• [PATCH 0/4] Add a generic struct clk   Mark Brown
• [PATCH] mfd: convert devicetree to platform data on max8925   Mark Brown
• [PATCH 16/17] mach-sa1100: retire custom LED code   Russell King - ARM Linux
• [PATCH 02/10] ASoc: mxs: add mxs-saif driver   Mark Brown
• [PATCH 03/17] mach-realview: retire custom LED code   Russell King - ARM Linux
• [PATCH 04/17] mach-versatile: retire custom LED code   Russell King - ARM Linux
• [PATCH 06/17] mach-shark: retire custom LED code   Russell King - ARM Linux
• [PATCH 08/17] mach-integrator: retire custom LED code   Russell King - ARM Linux
• [PATCH 10/17] mach-ebsa110: retire custom LED code   Russell King - ARM Linux
• [PATCH 11/17] mach-footbridge: retire custom LED code   Russell King - ARM Linux
• [PATCH 12/17] mach-pxa: retire custom LED code   Russell King - ARM Linux
• [PATCH 0/4] Add a generic struct clk   Russell King - ARM Linux
• [PATCH 0/4] Add a generic struct clk   Russell King - ARM Linux
• [GIT PULL] omap twl cleanup for v3.1 merge window   Tony Lindgren
• [PATCH V2 0/6] arm_smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   Russell King - ARM Linux
• [PATCH] mfd: convert devicetree to platform data on max8925   Grant Likely
• [PATCH V2 6/6] mpcore_wdt: Move declarations in a separate header   Russell King - ARM Linux
• [PATCH V3 1/4] ARM: smp_twd: Fix typo in 'twd_timer_rate' printing   Russell King - ARM Linux
• [GIT PULL] OMAP: SoC data/core: fixes for 3.1   Paul Walmsley
• [PATCH 01/17] ARM: proc: add definition of cpu_reset for ARMv6 and ARMv7 cores   Will Deacon
• [PATCH 0/4] Add a generic struct clk   Mark Brown
• [PATCH 3/3] mc13xxx: implicitly enable leds and buttons   Philippe Rétornaz
• [PATCH 01/17] ARM: proc: add definition of cpu_reset for ARMv6 and ARMv7 cores   Russell King - ARM Linux
• [PATCH 0/4] Add a generic struct clk   Russell King - ARM Linux
• [PATCH 02/10] ASoc: mxs: add mxs-saif driver   Dong Aisheng
• [PATCH 1/2] clk: Prototype and document clk_register()   Mark Brown
• [PATCH 2/2] clk: Provide a dummy clk_unregister()   Mark Brown
• [PATCH v2] pxa2xx_spi: fix memory corruption   Vasily Khoruzhick
• [PATCH v5] Consolidate SRAM support   Jean-Christophe PLAGNIOL-VILLARD
• [GIT PULL v2] OMAP: SoC data/core: fixes for 3.1   Paul Walmsley
• [GIT PULL] OMAP: SoC data/core: new code for 3.1   Paul Walmsley
• [PATCH v2] pxa2xx_spi: fix memory corruption   Marek Vasut
• [PATCH v2] pxa2xx_spi: fix memory corruption   Vasily Khoruzhick
• [PATCH v2 0/6] arm: davinci: DA850: wl12xx expansion card   Ido Yariv
• [PATCH v2 1/6] arm: davinci: Fix low level gpio irq handlers' argument   Ido Yariv
• [PATCH v2 2/6] arm: davinci: Explicitly set channel controllers' default queues   Ido Yariv
• [PATCH v2 3/6] arm: davinci: mmc: Add support for set_power callback   Ido Yariv
• [PATCH v2 4/6] arm: davinci: DA850: Add MMC/SD1 pinmux configuration   Ido Yariv
• [PATCH v2 5/6] arm: davinci: DA850: Add GPIO pinmux configuration for wl1271   Ido Yariv
• [PATCH v2 6/6] arm: davinci: DA850: Add wl1271/wlan support   Ido Yariv
• [PATCH 01/17] ARM: proc: add definition of cpu_reset for ARMv6 and ARMv7 cores   Will Deacon
• plat-orion multi purpose pins problem for mv78200   saeed bishara
• [PATCH 3/3] mc13xxx: implicitly enable leds and buttons   Uwe Kleine-König
• [PATCH] Use MMIO clocksource for 32kHz counter   Russell King - ARM Linux
• [PATCHv2 0/3] clocksource: add db8500 PRCMU timer   Russell King - ARM Linux
• [PATCH 2/6] ARM: move ARCH_HAS_DMA_SET_COHERENT_MASK into memory.h   Rob Herring
• [PATCH 2/6] ARM: move ARCH_HAS_DMA_SET_COHERENT_MASK into memory.h   Russell King - ARM Linux
• [PATCH] dmaengine: add dma_ctrl_cmd to pass buffer stride configuration   Sundaram Raju
• [PATCH v8 14/14] ARM: gic: add gic_ppi_map_on_cpu()   Marc Zyngier
• [PATCH v8 03/14] ARM: smp_twd: add support for remapped PPI interrupts   Marc Zyngier
• [PATCH v3] pxa2xx_spi: fix memory corruption   Vasily Khoruzhick
• [PATCH v8 14/14] ARM: gic: add gic_ppi_map_on_cpu()   Russell King - ARM Linux
• [PATCH v8 14/14] ARM: gic: add gic_ppi_map_on_cpu()   Russell King - ARM Linux
• [PATCH v6] mmc: documentation of mmc non-blocking request usage and design.   Per Forlin
• [GIT PULL] omap twl cleanup for v3.1 merge window   Tony Lindgren
• [GIT PULL] minimal omap4460 support for v3.1 merge window   Tony Lindgren
• [PATCH] ARM: tegra: remove mach/barriers.h   Colin Cross
• [GIT PULL v3 0/3] TrimSlice updates for 3.1   Colin Cross
• [PATCH 0/6 V2] ARM: tegra: paz00 patches for 2.6.40   Colin Cross
• [PATCH 1/2] ARM: tegra: remove copy-and-pasted i2c platform data in boards   Colin Cross
• [PATCH 2/2] ARM: tegra: remove copy-and-pasted usb platform data from boards   Colin Cross
• [PATCH 0/4] Add a generic struct clk   Jeremy Kerr
• [PATCH 0/6] clk: Initial feedback for off-SoC slow bus clocks   Mark Brown
• [PATCH 1/6] clk: Prototype and document clk_register()   Mark Brown
• [PATCH 2/6] clk: Provide a dummy clk_unregister()   Mark Brown
• [PATCH 3/6] clk: Constify struct clk_hw_ops   Mark Brown
• [PATCH 4/6] clk: Add Kconfig option to build all generic clk drivers   Mark Brown
• [PATCH 5/6] clk: Support multiple instances of the same clock provider   Mark Brown
• [PATCH 6/6] clk: Add initial WM831x clock driver   Mark Brown
• [PATCH 0/6] clk: Initial feedback for off-SoC slow bus clocks   Mark Brown
• [PATCH 0/4] Add a generic struct clk   Mark Brown
• [PATCH 0/6] clk: Initial feedback for off-SoC slow bus clocks   Mike Frysinger
• [PATCH 0/6] clk: Initial feedback for off-SoC slow bus clocks   Barry Song
• [uclinux-dist-devel] [PATCH 0/6] clk: Initial feedback for off-SoC slow bus clocks   Mike Frysinger
• [PATCH] ARM: mmp: remove builtin gpio driver support   Haojian Zhuang
• [PATCH v6 1/4] ARM: mxs: add GPMI-NAND support for imx23/imx28   Huang Shijie
• [PATCH] ARM: mmp: add DTS file   Haojian Zhuang
• [PATCH] Use MMIO clocksource for 32kHz counter   Tony Lindgren
• [PATCH 2/6] spi/imx: use soc name in spi device type naming scheme   Sascha Hauer
• [PATCH v2 1/7] spi/imx: do not make copy of spi_imx_devtype_data   Lothar Waßmann
• [GIT PULL] pxa: fixes for v3.0-rc6 (2nd bunch)   Eric Miao
• [GIT PULL] pxa: cleanup for next   Eric Miao
• [GIT PULL] pxa: features for next   Eric Miao
• [GIT PULL] pxa: patches for v3.1   Eric Miao
• [PATCH v2 1/7] spi/imx: do not make copy of spi_imx_devtype_data   Uwe Kleine-König
• [PATCH v2 1/7] spi/imx: do not make copy of spi_imx_devtype_data   Lothar Waßmann
• [PATCH v2 2/7] spi/imx: use mx21 to name SPI_IMX_VER_0_0 function and macro   Uwe Kleine-König
• [PATCH v2 1/7] spi/imx: do not make copy of spi_imx_devtype_data   Shawn Guo
• [PATCH v2 4/7] spi/imx: merge type SPI_IMX_VER_0_7 into SPI_IMX_VER_0_4   Uwe Kleine-König
• [GIT PULL] pxa: features for next   Russell King - ARM Linux
• [GIT PULL] pxa: features for next   Eric Miao
• [PATCH v2 6/7] spi/imx: copy gpio number passed by platform data into driver private data   Uwe Kleine-König
• [GIT PULL] pxa: features for next   Russell King - ARM Linux
• [GIT PULL] pxa: features for next   Eric Miao
• [PATCH v2 1/7] spi/imx: do not make copy of spi_imx_devtype_data   Lothar Waßmann
• [GIT PULL] pxa: features for next   Russell King - ARM Linux
• [PATCH] Use MMIO clocksource for 32kHz counter   Russell King - ARM Linux
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Uwe Kleine-König
• [PATCH v7 0/4] add the GPMI-NAND support for imx23/imx28   Huang Shijie
• [PATCH v7 1/4] ARM: mxs: add GPMI-NAND support for imx23/imx28   Huang Shijie
• [PATCH v7 2/4] ARM: mxs: add new a pad control   Huang Shijie
• [PATCH v7 3/4] ARM: mxs/mx23evk: add GPMI-NAND device   Huang Shijie
• [PATCH v7 4/4] ARM: mxs/mx28evk: add GPMI-NAND device   Huang Shijie
• [PATCH 1/1] sgtl5000: fix i2c r/w issue add neglect VDDIO and VDDI=   Dong Aisheng
• ARM cortex A9 performance issue   rd bairva
• [PATCH 16/17] mach-sa1100: retire custom LED code   Jochen Friedrich
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Huang Shijie
• [GIT PULL] pxa: features for next   Eric Miao
• [GIT PULL] OMAP: SoC data/core: cleanups for 3.1   Tony Lindgren
• [PATCH v5 1/3] ARM: mxs: add GPMI-NFC support for imx23/imx28   Lothar Waßmann
• [GIT PULL] pxa: features for next   Russell King - ARM Linux
• [PATCH 1/1] ARM: i.MX50/53: debug-macro: fix UART_PADDR   Amit Kucheria
• [PATCH v3] davinci: da850 EVM: read mac address from SPI flash   Rajashekhara, Sudhakar
• [PATCH] dmaengine: add dma_ctrl_cmd to pass buffer stride configuration   Linus Walleij
• [PATCH 1/1] ARM: i.MX50/53: debug-macro: fix UART_PADDR   Uwe Kleine-König
• [PATCH 0/6] clk: Initial feedback for off-SoC slow bus clocks   Russell King - ARM Linux
• [PATCH 5/6] clk: Support multiple instances of the same clock provider   Russell King - ARM Linux
• [PATCH] mach-integrator: delete bits.h include file   Linus Walleij
• [PATCH] mach-integrator: delete bits.h include file   Russell King - ARM Linux
• [PATCH V2 0/6] arm_smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   Catalin Marinas
• [PATCH V3] MMC: PM: add suspend/resume in atmel-mci   Nicolas Ferre
• [PATCH v8 14/14] ARM: gic: add gic_ppi_map_on_cpu()   Marc Zyngier
• [PATCH V2 0/6] arm_smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   Russell King - ARM Linux
• [PATCH 02/10] ASoc: mxs: add mxs-saif driver   Wolfram Sang
• [GIT PULL] pxa: features for next   Eric Miao
• [PATCH 0/6] clk: Initial feedback for off-SoC slow bus clocks   Sascha Hauer
• [PATCH 1/1] ARM: i.MX50/53: debug-macro: fix UART_PADDR   Amit Kucheria
• [GIT PULL] pxa: features for next   Eric Miao
• [PATCH v8 14/14] ARM: gic: add gic_ppi_map_on_cpu()   Russell King - ARM Linux
• [GIT PULL] pxa: features for next   Russell King - ARM Linux
• [PATCH 0/6] clk: Initial feedback for off-SoC slow bus clocks   Russell King - ARM Linux
• [RFC PATCH] ARM ASoC: add sound driver for imx27pdk using mc13783 codec   Lambrecht Jürgen
• [PATCH 0/6] clk: Initial feedback for off-SoC slow bus clocks   Sascha Hauer
• [PATCH 5/6] clk: Support multiple instances of the same clock provider   Mark Brown
• [PATCH v7 0/4] add the GPMI-NAND support for imx23/imx28   Wolfram Sang
• [PATCH 11/51] ARM: Kconfig: Allow kprobes on Thumb-2 kernels   Sergei Shtylyov
• [PATCH V2 0/6] arm_smp_twd: mpcore_wdt: Fix MPCORE watchdog setup   Catalin Marinas
• [PATCH 05/17] mach-ks8695: remove leds driver, since nobody use it   Sergei Shtylyov
• [PATCH 5/6] clk: Support multiple instances of the same clock provider   Russell King - ARM Linux
• [PATCH v8 14/14] ARM: gic: add gic_ppi_map_on_cpu()   Marc Zyngier
• [PATCH v14 00/12] dmtimer adaptation to platform_driver   Tarun Kanti DebBarma
• [PATCH v14 01/12] OMAP2+: dmtimer: add device names to flck nodes   Tarun Kanti DebBarma
• [PATCH v14 02/12] OMAP4: hwmod data: add dmtimer version information   Tarun Kanti DebBarma
• [PATCH v14 03/12] OMAP1: dmtimer: conversion to platform devices   Tarun Kanti DebBarma
• [PATCH v14 04/12] OMAP2+: dmtimer: convert to platform devices   Tarun Kanti DebBarma
• [PATCH v14 05/12] OMAP: dmtimer: platform driver   Tarun Kanti DebBarma
• [PATCH v14 06/12] OMAP: dmtimer: switch-over to platform device driver   Tarun Kanti DebBarma
• [PATCH v14 07/12] OMAP: dmtimer: pm_runtime support   Tarun Kanti DebBarma
• [PATCH v14 08/12] OMAP: dmtimer: add timeout to low-level routines   Tarun Kanti DebBarma
• [PATCH v14 09/12] OMAP: dmtimer: use mutex instead of spinlock   Tarun Kanti DebBarma
• [PATCH v14 10/12] OMAP: dmtimer: mark clocksource and clockevent timers reserved   Tarun Kanti DebBarma
• [PATCH v14 11/12] OMAP: dmtimer: add context save/restore routines   Tarun Kanti DebBarma
• [PATCH v14 12/12] OMAP: dmtimer: Off mode support   Tarun Kanti DebBarma
• [PATCH v14 00/12] dmtimer adaptation to platform_driver   Tarun Kanti DebBarma
• [PATCH v14 01/12] OMAP2+: dmtimer: add device names to flck nodes   Tarun Kanti DebBarma
• [PATCH v14 02/12] OMAP4: hwmod data: add dmtimer version information   Tarun Kanti DebBarma
• [PATCH v14 03/12] OMAP1: dmtimer: conversion to platform devices   Tarun Kanti DebBarma
• [PATCH v14 04/12] OMAP2+: dmtimer: convert to platform devices   Tarun Kanti DebBarma
• [PATCH v14 05/12] OMAP: dmtimer: platform driver   Tarun Kanti DebBarma
• [PATCH v14 06/12] OMAP: dmtimer: switch-over to platform device driver   Tarun Kanti DebBarma
• [PATCH v14 07/12] OMAP: dmtimer: pm_runtime support   Tarun Kanti DebBarma
• [PATCH v14 08/12] OMAP: dmtimer: add timeout to low-level routines   Tarun Kanti DebBarma
• [PATCH v14 09/12] OMAP: dmtimer: use mutex instead of spinlock   Tarun Kanti DebBarma
• [PATCH v14 10/12] OMAP: dmtimer: mark clocksource and clockevent timers reserved   Tarun Kanti DebBarma
• [PATCH v14 11/12] OMAP: dmtimer: add context save/restore routines   Tarun Kanti DebBarma
• [PATCH v14 12/12] OMAP: dmtimer: Off mode support   Tarun Kanti DebBarma
• [PATCH 11/51] ARM: Kconfig: Allow kprobes on Thumb-2 kernels   Tixy
• [RFC PATCH 06/17] ARM: kernel: save/restore generic infrastructure   Lorenzo Pieralisi
• [PATCH v8 14/14] ARM: gic: add gic_ppi_map_on_cpu()   Russell King - ARM Linux
• [PATCH 5/6] clk: Support multiple instances of the same clock provider   Mark Brown
• [PATCH 11/51] ARM: Kconfig: Allow kprobes on Thumb-2 kernels   Russell King - ARM Linux
• [PATCH 0/6] clk: Initial feedback for off-SoC slow bus clocks   Mark Brown
• [PATCH] ARM: mmp: remove builtin gpio driver support   Eric Miao
• [RFC PATCH] ARM ASoC: add sound driver for imx27pdk using mc13783 codec   Mark Brown
• [PATCH 11/51] ARM: Kconfig: Allow kprobes on Thumb-2 kernels   Tixy
• Remaining omap pull requests   Tony Lindgren
• [PATCH V3 1/4] ARM: smp_twd: Fix typo in 'twd_timer_rate' printing   Vitaly Kuzmichev
• [GIT PULL] omap related MFD and ASoC patches for v3.1 merge window   Tony Lindgren
• [PATCH v2 1/6] arm: davinci: Fix low level gpio irq handlers' argument   Nori, Sekhar
• [PATCH v3] davinci: da850 EVM: read mac address from SPI flash   Nori, Sekhar
• [PATCH v8 14/14] ARM: gic: add gic_ppi_map_on_cpu()   Marc Zyngier
• [PATCHv11 0/8] Contiguous Memory Allocator   Marek Szyprowski
• zaurus patches -- arm/pxa -- is Eric alive   Pavel Machek
• zaurus patches -- arm/pxa -- is Eric alive   Dmitry Eremin-Solenikov
• [Linaro-mm-sig] [PATCH 6/8] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 05/17] mach-ks8695: remove leds driver, since nobody use it   Bryan Wu
• [PATCH 1/1] ARM: i.MX50/53: debug-macro: fix UART_PADDR   Uwe Kleine-König
• [PATCH 05/17] mach-ks8695: remove leds driver, since nobody use it   Nicolas Pitre
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Lorenzo Pieralisi
• [PATCH 04/17] mach-versatile: retire custom LED code   Bryan Wu
• zaurus patches -- arm/pxa -- is Eric alive   Cyril Hrubis
• [PATCH 05/17] mach-ks8695: remove leds driver, since nobody use it   Bryan Wu
• [PATCH 03/17] mach-realview: retire custom LED code   Bryan Wu
• zaurus patches -- arm/pxa -- is Eric alive   Wolfram Sang
• [PATCH 06/17] mach-shark: retire custom LED code   Bryan Wu
• zaurus patches -- arm/pxa -- is Eric alive   Cyril Hrubis
• [PATCH 11/17] mach-footbridge: retire custom LED code   Bryan Wu
• [PATCH 12/17] mach-pxa: retire custom LED code   Bryan Wu
• [PATCH 05/17] mach-ks8695: remove leds driver, since nobody use it   Andrew Victor
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Frank Hofmann
• [PATCH 16/17] mach-sa1100: retire custom LED code   Bryan Wu
• [PATCH 16/17] mach-sa1100: retire custom LED code   Bryan Wu
• [PATCH] ARM: get rid of a few StrongARM cache-related build time constants   Nicolas Pitre
• [PATCH] new helper to define common struct resource constructs   Uwe Kleine-König
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Daniel Mack
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Nicolas Pitre
• [PATCH 1/2] ARM: tegra: remove copy-and-pasted i2c platform data in boards   Stephen Warren
• [PATCH] ARM: mxc: use new helpers to define common struct resource entries   Uwe Kleine-König
• zaurus patches -- arm/pxa -- is Eric alive   Eric Miao
• [PATCH v7 0/4] add the GPMI-NAND support for imx23/imx28   Huang Shijie
• [PATCH 3/3] Update Nook Color machine 3284 to common Encore name.   Russell King - ARM Linux
• [PATCH v2 0/6] ARM: make mach/hardware.h optional   Rob Herring
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Lorenzo Pieralisi
• PL330 alignment requirement questions   John Linn
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Lorenzo Pieralisi
• [PATCH] ARM:SAMSUNG: DMA Cleanup as per sparse [re-submit]   Sangwook Lee
• [PATCH 1/1] ARM: Only clean the D-cache to the PoU in v7_flush_kern_dcache_area()   Catalin Marinas
• Unnecessary cache-line flush on page table updates ?   Catalin Marinas
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Frank Hofmann
• ARM cortex A9 performance issue   Dave Martin
• Unnecessary cache-line flush on page table updates ?   Russell King - ARM Linux
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   H Hartley Sweeten
• [pm-wip/cpufreq] [PATCH] OMAP2+: CPUfreq: update lpj with reference value to avoid progressive error.   Santosh Shilimkar
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Lorenzo Pieralisi
• [PATCH 01/51] ARM: Thumb-2: Fix exception return sequence to restore stack correctly   Nicolas Pitre
• [PATCH 02/51] ARM: Thumb-2: Support Thumb-2 in undefined instruction handler   Nicolas Pitre
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Igor Grinberg
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Russell King - ARM Linux
• [PATCH v2] MAX1111: Fix Race condition causing NULL pointer exception   Pavel Herrmann
• [pm-wip/cpufreq] [PATCH] OMAP2+: CPUfreq: update lpj with reference value to avoid progressive error.   Kevin Hilman
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Colin Cross
• [PATCH] OMAP3+: SR: ensure pm-runtime callbacks can be invoked with IRQ disabled   Kevin Hilman
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Daniel Mack
• zaurus patches -- arm/pxa -- is Eric alive   Pavel Herrmann
• [Linaro-mm-sig] [PATCH 6/8] drivers: add Contiguous Memory Allocator   Janusz Krzysztofik
• [PATCH 15/51] ARM: kprobes: Don't trigger probes on conditional instructions when condition is false   Nicolas Pitre
• [PATCH 18/51] ARM: kprobes: Extend arch_specific_insn to add pointer to emulated instruction   Nicolas Pitre
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Russell King - ARM Linux
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Igor Grinberg
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Colin Cross
• [PATCH 2/3] ARM: Call idle notifiers   Frederic Weisbecker
• [PATCH 19/51] ARM: kprobes: Infrastructure for table driven decoding of CPU instructions   Nicolas Pitre
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Santosh Shilimkar
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Santosh Shilimkar
• [PATCH v2] MAX1111: Fix Race condition causing NULL pointer exception   Jean Delvare
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Russell King - ARM Linux
• [PATCH 0/7] Re-organize linker layouts   Stephen Boyd
• [PATCH v2 1/6] arm: davinci: Fix low level gpio irq handlers' argument   Ido Yariv
• [PATCH v2] MAX1111: Fix Race condition causing NULL pointer exception   Pavel Herrmann
• [Zaurus-devel] [PATCH v2] MAX1111: Fix Race condition causing NULL pointer exception   Stanislav Brabec
• [PATCH v3 1/6] arm: davinci: Fix low level gpio irq handlers' argument   Ido Yariv
• [PATCH v2] MAX1111: Fix Race condition causing NULL pointer exception   Guenter Roeck
• [PATCH] ARM: Implements cache information exporting   Gratian Crisan
• zaurus patches -- arm/pxa -- is Eric alive   Pavel Machek
• [PATCH 16/17] mach-sa1100: retire custom LED code   Russell King - ARM Linux
• [GIT PULL] CSR SiRFprimaII board support for v3.1   Arnd Bergmann
• [PATCH] ARM: get rid of a few StrongARM cache-related build time constants   Russell King - ARM Linux
• [GIT PULL] pxa: cleanup for next   Arnd Bergmann
• [GIT PULL] pxa: features for next   Arnd Bergmann
• [GIT PULL] pxa: fixes for v3.0-rc6 (2nd bunch)   Arnd Bergmann
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Santosh Shilimkar
• [PATCH] mach-integrator: delete bits.h include file   Arnd Bergmann
• Please submit platform trees for inclusion in arm-soc.git v3.1   Arnd Bergmann
• [PATCH] dmaengine: add dma_ctrl_cmd to pass buffer stride configuration   Dan Williams
• [PATCH v2] MAX1111: Fix Race condition causing NULL pointer exception   Pavel Herrmann
• [PATCH v3] MAX1111: Fix Race condition causing NULL pointer exception   Pavel Herrmann
• [PATCH 16/17] mach-sa1100: retire custom LED code   Arnd Bergmann
• [PATCH 0/3] Add generic idle notifiers   Todd Poynor
• [PATCH 0/7] Re-organize linker layouts   Nicolas Pitre
• Remaining omap pull requests   Arnd Bergmann
• Please submit platform trees for inclusion in arm-soc.git v3.1   Nicolas Pitre
• [PATCH v14 05/12] OMAP: dmtimer: platform driver   Todd Poynor
• [PATCH v14 04/12] OMAP2+: dmtimer: convert to platform devices   Todd Poynor
• [PATCH] OMAP2+: PM: fix watchdog boot when runtime PM is disabled   Kevin Hilman
• [PATCH v14 05/12] OMAP: dmtimer: platform driver   DebBarma, Tarun Kanti
• [PATCH v14 04/12] OMAP2+: dmtimer: convert to platform devices   DebBarma, Tarun Kanti
• [PATCH 0/4] OMAP: PM: omap_device: update PM domain support for v3.1   Kevin Hilman
• [PATCH 1/4] OMAP: PM: omap_device: conditionally use PM domain runtime helpers   Kevin Hilman
• [PATCH 2/4] OMAP: PM: omap_device: add system PM methods for PM domain handling   Kevin Hilman
• [PATCH 3/4] OMAP: PM: omap_device: add API to disable idle on suspend   Kevin Hilman
• [PATCH 4/4] OMAP: PM: disable idle on suspend for GPIO and UART   Kevin Hilman
• [PATCH] OMAP2+: PM: fix watchdog boot when runtime PM is disabled   Hilman, Kevin
• [PATCH] OMAP2+: PM: fix watchdog boot when runtime PM is disabled   Santosh Shilimkar
• [PATCH v4] ARM: Use generic BUG() handler   Simon Glass
• [PATCH 1/6] ARM: i.MX53: UARTn_TXD pin should not change RXD input select   Troy Kisky
• [PATCH 2/6] ARM: i.MX53: UARTn_CTS pin should not change RTS input select   Troy Kisky
• [PATCH 3/6] ARM: i.MX53: consistently use MX53_UART_PAD_CTRL for uart txd/rxd/rts/cts   Troy Kisky
• [PATCH 6/6] ARM: i.MX53: change MX53_..._UARTn_TXD_MUX to UARTn_TXD   Troy Kisky
• [PATCH v6] mmc: documentation of mmc non-blocking request usage and design.   J Freyensee
• [PATCH 16/17] mach-sa1100: retire custom LED code   Bryan Wu
• [PATCH 37/51] ARM: kprobes: Optimise emulation of LDM and STM   Nicolas Pitre
• ARM: kprobes: Add support for Thumb-2   Nicolas Pitre
• [PATCH 1/1] ARM: i.MX50/53: debug-macro: fix UART_PADDR   Troy Kisky
• [PATCH 1/2] ARM: tegra: remove copy-and-pasted i2c platform data in boards   Colin Cross
• [PATCH] dmaengine: add dma_ctrl_cmd to pass buffer stride configuration   Jassi Brar
• [PATCH 00/10] mm: Linux VM Infrastructure to support Memory Power Management   amit kachhap
• [Linaro-mm-sig] [PATCH 6/8] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCH] clocksource: convert S5PV210 32-bit down counting clocksource   Chanwoo Choi
• [PATCH] OMAP3: run the ASM sleep code from DDR   Pavel Machek
• [PATCH] ARM:SAMSUNG: DMA Cleanup as per sparse [re-submit]   Tushar Behera
• [PATCH 3.1 0/4] ARM: simpad: Add support for GPIO attached hardware   Jochen Friedrich
• [PATCH 3.1 1/4] ARM:simpad: Add ucb1x00 GPIO definitions and register GPIO   Jochen Friedrich
• [PATCH 3.1 2/4] ARM:simpad: Cleanup CS3 accessors.   Jochen Friedrich
• [PATCH 3.1 3/4] ARM:simpad: add GPIO based device definitions.   Jochen Friedrich
• [PATCH 3.1 4/4] ARM: simpad: replace ARM specific LED code   Jochen Friedrich
• [PATCH v2] MAX1111: Fix Race condition causing NULL pointer exception   Jean Delvare
• [PATCH 1/2] arch: arm: Correct the dependency of HAVE_ARM_TWD   林宏文
• [PATCH 19/51] ARM: kprobes: Infrastructure for table driven decoding of CPU instructions   Tixy
• [PATCH 37/51] ARM: kprobes: Optimise emulation of LDM and STM   Tixy
• [PATCH 16/17] mach-sa1100: retire custom LED code   Russell King - ARM Linux
• [PATCH 3.1 3/4] ARM:simpad: add GPIO based device definitions.   Dmitry Eremin-Solenikov
• [PATCH 1/2] arch: arm: Correct the dependency of HAVE_ARM_TWD   Russell King - ARM Linux
• [RFC] Improving scalability of smp_mb__[before|after]_clear_bit   heechul Yun
• [PATCH v3] MAX1111: Fix Race condition causing NULL pointer exception   Jean Delvare
• [PATCH 1/1] ARM: i.MX50/53: debug-macro: fix UART_PADDR   Uwe Kleine-König
• [PATCH v3] MAX1111: Fix Race condition causing NULL pointer exception   Pavel Herrmann
• [PATCH] ARM: fix regression in IXP4xx clocksource   Richard Cochran
• [lm-sensors] [PATCH v3] MAX1111: Fix Race condition causing NULL pointer exception   Mark Brown
• [PATCH 3/7] DMA: PL330: Add DMA capabilities   Jassi Brar
• [PATCH] ARM: fix regression in IXP4xx clocksource   Russell King - ARM Linux
• [PATCH v3] MAX1111: Fix Race condition causing NULL pointer exception   Jean Delvare
• Remaining omap pull requests   Jan Weitzel
• [PATCH v3 1/6] arm: davinci: Fix low level gpio irq handlers' argument   Nori, Sekhar
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [RESEND] [PATCH 1/2] OMAP1: allow reserving memory for camera   Janusz Krzysztofik
• Pull request for LPC32xx   Wolfram Sang
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Daniel Mack
• [PATCH] dmaengine: add dma_ctrl_cmd to pass buffer stride configuration   Linus Walleij
• [PATCH] dmaengine: add dma_ctrl_cmd to pass buffer stride configuration   Linus Walleij
• [RFC] Improving scalability of smp_mb__[before|after]_clear_bit   Catalin Marinas
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Lorenzo Pieralisi
• [PATCH V3] mmc: Enable the ADMA2 on esdhc imx driver   Richard Zhu
• [PATCH] dmaengine: add dma_ctrl_cmd to pass buffer stride configuration   Raju, Sundaram
• [RFC PATCH 05/17] ARM: kernel: save/restore kernel IF   Russell King - ARM Linux
• [PATCH V6 0/4] pxa3xx_nand: add two chip select support   Lei Wen
• [PATCH V6 1/4] MTD: pxa3xx_nand: convert all printk into dev_*   Lei Wen
• [PATCH v4] davinci: da850 EVM: read mac address from SPI flash   Rajashekhara, Sudhakar
• [PATCH V6 2/4] MTD: pxa3xx_nand: sperate each chip individual info   Lei Wen
• [PATCH V6 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH V6 4/4] MTD: pxa3xx_nand: enhance suspend and resume routine   Lei Wen
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH v3] davinci: da850 EVM: read mac address from SPI flash   Rajashekhara, Sudhakar
• [PATCH 0/6 V2] ARM: tegra: paz00 patches for 2.6.40   Marc Dietrich
• [PATCH] dmaengine: add dma_ctrl_cmd to pass buffer stride configuration   Raju, Sundaram
• [PATCH] USB: s3c2410_udc: fix unterminated platform_device_id table   Axel Lin
• [PATCH] dmaengine: add dma_ctrl_cmd to pass buffer stride configuration   Linus Walleij
• [PATCH 04/17] mach-versatile: retire custom LED code   Linus Walleij
• [PATCH] i.MX53: Initial Ka-Ro electronics TX53 board support   Lothar Waßmann
• [PATCH] dmaengine: add dma_ctrl_cmd to pass buffer stride configuration   Jassi Brar
• [PATCH v6] mmc: documentation of mmc non-blocking request usage and design.   Per Forlin
• [PATCH] dmaengine: add dma_ctrl_cmd to pass buffer stride configuration   Raju, Sundaram
• [PATCH V6 4/4] MTD: pxa3xx_nand: enhance suspend and resume routine   Daniel Mack
• RFC: Issues using runtime API's with console uart   Govindraj
• [PATCH v2] ARM: head, zImage: Always Enter the kernel in ARM state   Dave Martin
• [PATCH] i.MX53: Initial Ka-Ro electronics TX53 board support   Shawn Guo
• Issues using runtime API's with console uart   Vishwanath Sripathy
• [PATCH V6 4/4] MTD: pxa3xx_nand: enhance suspend and resume routine   Daniel Mack
• [GIT PULL] pxa: features for next   Eric Miao
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Daniel Mack
• [PATCH 1/2] arm: mach-mxs: add device for rtc   Wolfram Sang
• [PATCH 2/2] arm: mach-mxs: add rtc to all boards   Wolfram Sang
• [PATCH] [RFC PATCH] ARM: kprobes: Make breakpoint setting/clearing SMP safe   Tixy
• [PATCH] dmaengine: add dma_ctrl_cmd to pass buffer stride configuration   Jassi Brar
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Daniel Mack
• [PATCH 16/17] mach-sa1100: retire custom LED code   Arnd Bergmann
• Please submit platform trees for inclusion in arm-soc.git v3.1   Arnd Bergmann
• [PATCH v2] ARM: support XZ compressed kernels   Imre Kaloz
• [PATCH v2 0/6] ARM: make mach/hardware.h optional   Arnd Bergmann
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Lee Jones
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Lee Jones
• [PATCH 3/3] Add documenation for new sysfs devices/soc functionallity   Lee Jones
• Unnecessary cache-line flush on page table updates ?   Catalin Marinas
• Pull request for LPC32xx   Arnd Bergmann
• [PATCH 4/5] DRM: Add support for the sii902x HDMI/DVI encoder   Sascha Hauer
• [PATCH] new helper to define common struct resource constructs   Arnd Bergmann
• [PATCH 1/1] ARM: i.MX50/53: debug-macro: fix UART_PADDR   Sascha Hauer
• [PATCH 1/1] ARM: i.MX50/53: debug-macro: fix UART_PADDR   Sascha Hauer
• plat-orion multi purpose pins problem for mv78200   Joey Oravec
• [PATCH 4/6] ARM: i.MX53: clean up iomux-mx53.h   Sascha Hauer
• [PATCH v2 0/6] ARM: make mach/hardware.h optional   Michal Simek
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Arnd Bergmann
• [PATCH 07/15] pxa25x_udc: drop support for udc_command   Dmitry Eremin-Solenikov
• [PATCH] MAINTAINERS: add maintainer of CSR SiRFprimaII machine   Barry Song
• [PATCH V3] mmc: Enable the ADMA2 on esdhc imx driver   Sascha Hauer
• [PATCH] i.MX53: Initial Ka-Ro electronics TX53 board support   Sascha Hauer
• [PATCH] i.MX53: Initial Ka-Ro electronics TX53 board support   Shawn Guo
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Baruch Siach
• [PATCH V3] mmc: Enable the ADMA2 on esdhc imx driver   Anton Vorontsov
• [PATCH V7 0/4] pxa3xx_nand: add two chip select support   Lei Wen
• [PATCH V7 1/4] MTD: pxa3xx_nand: enhance suspend and resume routine   Lei Wen
• [PATCH V7 2/4] MTD: pxa3xx_nand: convert all printk into dev_*   Lei Wen
• [PATCH V7 3/4] MTD: pxa3xx_nand: sperate each chip individual info   Lei Wen
• [PATCH V7 4/4] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH] OMAP2+: PM: fix watchdog boot when runtime PM is disabled   Kevin Hilman
• [PATCH V2 00/10]   Dong Aisheng
• [PATCH V2 01/10] ASoc: mxs: add mxs-pcm driver   Dong Aisheng
• [PATCH V2 02/10] ASoc: mxs: add mxs-saif driver   Dong Aisheng
• [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Dong Aisheng
• [PATCH V2 04/10] ASoc: mxs: add asoc configuration files   Dong Aisheng
• [PATCH V2 05/10] ARM: mxs: add saif clock   Dong Aisheng
• [PATCH V2 06/10] ARM: mxs: add saif device   Dong Aisheng
• [GIT PULL] pxa: features for next   Arnd Bergmann
• [PATCH 3/4] MTD: pxa3xx_nand: enable multiple chip select support   Igor Grinberg
• [PATCH V6 4/4] MTD: pxa3xx_nand: enhance suspend and resume routine   Igor Grinberg
• [RFC] dmaengine: Moving TI SDMA driver to dmaengine - design plan   Vinod Koul
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Greg KH
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Saravana Kannan
• [PATCH 4/6] ARM: i.MX53: clean up iomux-mx53.h   Troy Kisky
• [PATCH] OMAP4: 4430SDP: Keypad: Make keypad_data initdata   Shubhrajyoti D
• [PATCH] MAINTAINERS: add maintainer of CSR SiRFprimaII machine   Arnd Bergmann
• [PATCH 4/6] ARM: i.MX53: clean up iomux-mx53.h   Troy Kisky
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Arnd Bergmann
• [PATCH 1/1] ARM: i.MX50/53: debug-macro: fix UART_PADDR   Troy Kisky
• [PATCH v3 0/6] ARM: make mach/hardware.h optional   Rob Herring
• [PATCH 1/6] powerpc: rename ppc_pci_*_flags to pci_*_flags   Rob Herring
• [PATCH 2/6] pci: move microblaze and powerpc pci flag functions into asm-generic   Rob Herring
• [PATCH 3/6] ARM: remove unnecessary mach/hardware.h includes   Rob Herring
• [PATCH 4/6] ARM: pci: make pcibios_assign_all_busses use pci_has_flag   Rob Herring
• [PATCH 5/6] ARM: convert PCI defines to variables   Rob Herring
• [PATCH 6/6] ARM: set vga memory base at run-time   Rob Herring
• [PATCH 1/1] ARM: i.MX50/53: debug-macro: fix UART_PADDR   Troy Kisky
• [PATCH] new helper to define common struct resource constructs   H Hartley Sweeten
• [PATCH V6 4/4] MTD: pxa3xx_nand: enhance suspend and resume routine   Daniel Mack
• [PATCH V2 00/10]   Wolfram Sang
• [PATCH v2] new helper to define common struct resource constructs   Uwe Kleine-König
• [PATCH 2/2] ARM: tegra: remove copy-and-pasted usb platform data from boards   Mike Rapoport
• [PATCH 1/2] ARM: tegra: remove copy-and-pasted i2c platform data in boards   Mike Rapoport
• [PATCH 1/2] ARM: tegra: remove copy-and-pasted i2c platform data in boards   Olof Johansson
• [PATCH 0/4] OMAP: PM: omap_device: update PM domain support for v3.1   Rafael J. Wysocki
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Petr Štetiar
• [PATCH] ARM: tegra: remove mach/barriers.h   Olof Johansson
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   H Hartley Sweeten
• [PATCH v3 1/6] arm: davinci: Fix low level gpio irq handlers' argument   Ido Yariv
• [PATCH 1/4] ARM: davinci: Check for NULL return from irq_alloc_generic_chip   Todd Poynor
• [PATCH] OMAP4: 4430SDP: Keypad: Make keypad_data initdata   Kevin Hilman
• [PATCH 2/4] ARM: orion: Check NULL return from irq_alloc_generic_chip   Todd Poynor
• [PATCH 3/4] ARM: samsung: Check NULL return from irq_alloc_generic_chip   Todd Poynor
• [PATCH 4/4] ARM: OMAP2+: Check NULL return from irq_alloc_generic_chip   Todd Poynor
• [PATCH V2 01/10] ASoc: mxs: add mxs-pcm driver   Mark Brown
• [PATCH 1/2] TI816X: Add minimal hwmod data   Pedanekar, Hemant
• [PATCH] dmaengine: pl330: make platform data optional   Rob Herring
• [PATCH V2 02/10] ASoc: mxs: add mxs-saif driver   Mark Brown
• [PATCH V2 00/10] ARM: mxs: add audio support   Dong Aisheng-B29396
• [PATCH V2 01/10] ASoc: mxs: add mxs-pcm driver   Dong Aisheng-B29396
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Nicolas Pitre
• [PATCH] OMAP: powerdomains: Make all powerdomain target states as ON at init   Santosh Shilimkar
• [PATCH] OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup   Santosh Shilimkar
• [PATCH 02/10] ASoc: mxs: add mxs-saif driver   Dong Aisheng-B29396
• [PATCH V2 07/10] ARM: mxs: add sgtl5000 i2c device   Dong Aisheng
• [PATCH V2 08/10] ARM: mxs: add mxs-sgtl5000 device   Dong Aisheng
• [PATCH V2 09/10] ARM: mxs: correct the using of frac div for saif   Dong Aisheng
• [PATCH V2 10/10] ARM: mxs-dma: include <linux/dmaengine.h>   Dong Aisheng
• [GIT PULL] DaVinci fix for v3.0   Nori, Sekhar
• [GIT PULL] DaVinci fix for v3.0   Nori, Sekhar
• [PATCH V3] mmc: Enable the ADMA2 on esdhc imx driver   Pavel Machek
• Remaining omap pull requests   Tony Lindgren
• Remaining omap pull requests   Tony Lindgren
• [PATCH V2 01/10] ASoc: mxs: add mxs-pcm driver   Dong Aisheng-B29396
• [GIT PULL] OMAP: SoC data/core: cleanups for 3.1   Paul Walmsley
• [GIT PULL] OMAP: SoC data/core: cleanups for 3.1   Tony Lindgren
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Lee Jones
• [PATCH] ARM: EXYNOS4: Add platform device for dwmci driver.   Seungwon Jeon
• [PATCH V2 01/10] ASoc: mxs: add mxs-pcm driver   Russell King - ARM Linux
• mxs: usb support?   Koen Beel
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Greg KH
• [PATCH] OMAP2+: PM: fix watchdog boot when runtime PM is disabled   Paul Walmsley
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Lee Jones
• [PATCH v2] ARM:OMAP4 add Phytec phyCORE-OMAP4 board   Tony Lindgren
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Lee Jones
• [alsa-devel] [PATCH V2 02/10] ASoc: mxs: add mxs-saif driver   Dong Aisheng-B29396
• [PATCH] OMAP3: run the ASM sleep code from DDR   Paul Walmsley
• [PATCH V2 01/10] ASoc: mxs: add mxs-pcm driver   Dong Aisheng-B29396
• [PATCH] ARM: EXYNOS4: Add platform device for dwmci driver.   Kyungmin Park
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Lee Jones
• [PATCH] ARM: EXYNOS4: Add platform device for dwmci driver.   Russell King - ARM Linux
• [PATCH V2 00/12] To use DMA generic APIs for Samsung DMA   Kukjin Kim
• [PATCH V2 01/12] DMA: PL330: Add support runtime PM for PL330 DMAC   Kukjin Kim
• [PATCH V2 02/12] DMA: PL330: Update PL330 DMA API driver   Kukjin Kim
• [PATCH V2 03/12] DMA: PL330: Add DMA capabilities   Kukjin Kim
• [PATCH V2 04/12] ARM: SAMSUNG: Update to use PL330-DMA driver   Kukjin Kim
• [PATCH V2 05/12] ARM: SAMSUNG: Add common DMA operations   Kukjin Kim
• [PATCH V2 06/12] ARM: EXYNOS4: Use generic DMA PL330 driver   Kukjin Kim
• [PATCH V2 07/12] ARM: S5PV210: Use generic DMA PL330 driver   Kukjin Kim
• [PATCH V2 08/12] ARM: S5PC100: Use generic DMA PL330 driver   Kukjin Kim
• [PATCH V2 09/12] ARM: S5P64X0: Use generic DMA PL330 driver   Kukjin Kim
• [PATCH V2 10/12] ARM: SAMSUNG: Remove S3C-PL330-DMA driver   Kukjin Kim
• [PATCH V2 11/12] spi/s3c64xx: Add support DMA engine API   Kukjin Kim
• [PATCH V2 12/12] ASoC: Samsung: Update DMA interface   Kukjin Kim
• [PATCH 0/24] ARM: kprobes: Migrate ARM instruction decoding to data tables   Tixy
• [PATCH 01/24] ARM: kprobes: Migrate ARM space_1111 to decoding tables   Tixy
• [PATCH 02/24] ARM: kprobes: Add alu_write_pc()   Tixy
• [PATCH 03/24] ARM: kprobes: Add BLX macro   Tixy
• [PATCH 04/24] ARM: kprobes: Add emulate_rd12rn16rm0rs8_rwflags()   Tixy
• [PATCH 05/24] ARM: kprobes: Migrate ARM data-processing (register) instructions to decoding tables   Tixy
• [PATCH 06/24] ARM: kprobes: Add emulate_ldrdstrd()   Tixy
• [PATCH 07/24] ARM: kprobes: Migrate ARM LDRD and STRD to decoding tables   Tixy
• [PATCH 08/24] ARM: kprobes: Migrate ARM space_cccc_000x to decoding tables   Tixy
• [PATCH 09/24] ARM: kprobes: Migrate ARM space_cccc_001x to decoding tables   Tixy
• [PATCH 10/24] ARM: kprobes: Add emulate_rd12rn16rm0_rwflags_nopc()   Tixy
• [PATCH 11/24] ARM: kprobes: Migrate ARM space_cccc_0110__1 to decoding tables   Tixy
• [PATCH 12/24] ARM: kprobes: Migrate ARM space_cccc_0111__1 to decoding tables   Tixy
• [PATCH 13/24] ARM: kprobes: Migrate ARM space_cccc_01xx to decoding tables   Tixy
• [PATCH 14/24] ARM: kprobes: Migrate ARM space_cccc_100x to decoding tables   Tixy
• [PATCH 15/24] ARM: kprobes: Migrate remaining instruction decoding functions to tables   Tixy
• [PATCH 16/24] ARM: kprobes: Add emulate_rd16rn12rm0rs8_rwflags_nopc()   Tixy
• [PATCH 17/24] ARM: kprobes: Replace use of prep_emulate_rd12rn16rm0_wflags()   Tixy
• [PATCH 18/24] ARM: kprobes: Add emulate_rd12rm0_noflags_nopc()   Tixy
• [PATCH 19/24] ARM: kprobes: Add emulate_rdlo12rdhi16rn0rm8_rwflags_nopc()   Tixy
• [PATCH 20/24] ARM: kprobes: Add new versions of emulate_ldr() and emulate_str()   Tixy
• [PATCH 21/24] ARM: kprobes: Use new versions of emulate_ldr() and emulate_str()   Tixy
• [PATCH 22/24] ARM: kprobes: Reject probing of unprivileged load and store instructions   Tixy
• [PATCH 23/24] ARM: kprobes: Decode ARM preload (immediate) instructions   Tixy
• [PATCH 24/24] ARM: kprobes: Remove now unused code   Tixy
• [PATCH V2 01/12] DMA: PL330: Add support runtime PM for PL330 DMAC   Russell King - ARM Linux
• [PATCH V2 04/10] ASoc: mxs: add asoc configuration files   Wolfram Sang
• [PATCH V2 07/10] ARM: mxs: add sgtl5000 i2c device   Wolfram Sang
• [PATCH V2 03/12] DMA: PL330: Add DMA capabilities   Russell King - ARM Linux
• [PATCH v2] AT91 OHCI active-high vbus and overcurrent handling   Thomas Petazzoni
• [PATCH 1/3] ohci-at91: add vbus_pin_inverted platform attribute   Thomas Petazzoni
• [PATCH 2/3] at91-ohci: support overcurrent notification   Thomas Petazzoni
• [PATCH 3/3] at91-ohci: configure overcurrent pins as input GPIOs   Thomas Petazzoni
• [PATCH V2 07/10] ARM: mxs: add sgtl5000 i2c device   Wolfram Sang
• [PATCH 1/4] ARM: davinci: Check for NULL return from irq_alloc_generic_chip   Sergei Shtylyov
• [PATCH V2 00/16] omap_hsmmc patches   Grazvydas Ignotas
• [PATCH V7 1/4] MTD: pxa3xx_nand: enhance suspend and resume routine   Sergei Shtylyov
• [PATCH V7 2/4] MTD: pxa3xx_nand: convert all printk into dev_*   Sergei Shtylyov
• [PATCH v2] ARM:OMAP4 add Phytec phyCORE-OMAP4 board   Jan Weitzel
• [PATCH] ARM: OMAP4: PCM049: remove vusim regulator   Jan Weitzel
• [PATCH V2 03/12] DMA: PL330: Add DMA capabilities   boojin
• [PATCH V2 07/10] ARM: mxs: add sgtl5000 i2c device   Dong Aisheng-B29396
• [alsa-devel] [PATCH V2 04/10] ASoc: mxs: add asoc configuration files   Dong Aisheng
• [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Wolfram Sang
• [PATCH] ARM: OMAP4: PCM049: remove vusim regulator   Sergei Shtylyov
• [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Dong Aisheng-B29396
• [PATCH 3.1 3/4] ARM:simpad: add GPIO based device definitions.   Jochen Friedrich
• [PATCH 3.1 3/4] ARM:simpad: add GPIO based device definitions.   Dmitry Eremin-Solenikov
• [PATCH V7 2/4] MTD: pxa3xx_nand: convert all printk into dev_*   Lei Wen
• [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Mark Brown
• [PATCH v2] ARM: OMAP4: PCM049: remove vusim regulator   Jan Weitzel
• [PATCH] ARM: OMAP4: PCM049: remove vusim regulator   Jan Weitzel
• [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Wolfram Sang
• mxs: usb support?   Shawn Guo
• [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Dong Aisheng-B29396
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Arnd Bergmann
• [PATCH v4 00/20] gpio/omap: driver cleanup and fixes   Tarun Kanti DebBarma
• [PATCH v4 01/20] gpio/omap: remove dependency on gpio_bank_count   Tarun Kanti DebBarma
• [PATCH v4 02/20] gpio/omap: use flag to identify wakeup domain   Tarun Kanti DebBarma
• [PATCH v4 03/20] gpio/omap: make gpio_context part of gpio_bank structure   Tarun Kanti DebBarma
• [PATCH v4 04/20] gpio/omap: fix pwrdm_post_transition call sequence   Tarun Kanti DebBarma
• [PATCH v4 05/20] gpio/omap: handle save/restore ctx in GPIO driver   Tarun Kanti DebBarma
• [PATCH v4 06/20] gpio/omap: make non-wakeup GPIO part of pdata   Tarun Kanti DebBarma
• [PATCH v4 07/20] gpio/omap: avoid cpu checks during module ena/disable   Tarun Kanti DebBarma
• [PATCH v4 08/20] gpio/omap: further cleanup using wakeup_status register   Tarun Kanti DebBarma
• [PATCH v4 09/20] gpio/omap: cleanup omap1 related macros   Tarun Kanti DebBarma
• [PATCH v4 10/20] gpio/omap: use level/edge detect reg offsets   Tarun Kanti DebBarma
• [PATCH v4 11/20] gpio/omap: remove hardcoded offsets in ctxt save/restore   Tarun Kanti DebBarma
• [PATCH v4 12/20] gpio/omap: cleanup set_gpio_triggering function   Tarun Kanti DebBarma
• [PATCH v4 13/20] gpio/omap: cleanup omap_gpio_mod_init function   Tarun Kanti DebBarma
• [PATCH v4 14/20] gpio/omap: use pinctrl offset instead of macro   Tarun Kanti DebBarma
• [PATCH v4 15/20] gpio/omap: use readl in irq_handler for all access   Tarun Kanti DebBarma
• [PATCH v4 16/20] gpio/omap: remove bank->method & METHOD_* macros   Tarun Kanti DebBarma
• [PATCH v4 17/20] gpio/omap: fix bankwidth for OMAP7xx MPUIO   Tarun Kanti DebBarma
• [PATCH v4 18/20] gpio/omap: use pm-runtime framework   Tarun Kanti DebBarma
• [PATCH v4 19/20] gpio/omap: optimize suspend and resume functions   Tarun Kanti DebBarma
• [PATCH v4 20/20] gpio/omap: cleanup prepare_for_idle and resume_after_idle   Tarun Kanti DebBarma
• [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Wolfram Sang
• [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Dong Aisheng-B29396
• [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Dong Aisheng-B29396
• [PATCH 2/3] at91-ohci: support overcurrent notification   Thomas Petazzoni
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Lee Jones
• [PATCH v6] mmc: documentation of mmc non-blocking request usage and design.   Chris Ball
• [PATCH V7 2/4] MTD: pxa3xx_nand: convert all printk into dev_*   Sergei Shtylyov
• [RFC/RFT 2/2] davinci: use generic memory mapped gpio for tnetv107x   Anton Vorontsov
• [PATCH 0/3] pxa2xx related pcmcia tidyups.   Jonathan Cameron
• [PATCH 1/3] drivers:pcmcia:soc_common: make socket_init and socket_suspend optional   Jonathan Cameron
• [PATCH 2/3] pcmcia: pxa2xx: remove empty socket_init / socket_resume functions.   Jonathan Cameron
• [PATCH 3/3] pxa2xx pcmcia - stargate 2 use gpio array.   Jonathan Cameron
• [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Wolfram Sang
• [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Dong Aisheng
• [PATCH V2 00/16] omap_hsmmc patches   Chris Ball
• [PATCH v3 4/4] mmc: sdhci-esdhc-imx: add device tree probe support   Anton Vorontsov
• [PATCH 2/3] at91-ohci: support overcurrent notification   Alan Stern
• [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Wolfram Sang
• [PATCH 24/24] ARM: kprobes: Remove now unused code   Nicolas Pitre
• [PATCH v3 4/4] mmc: sdhci-esdhc-imx: add device tree probe support   Scott Wood
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Arnd Bergmann
• [PATCH v3 4/4] mmc: sdhci-esdhc-imx: add device tree probe support   Anton Vorontsov
• [PATCH v3 4/4] mmc: sdhci-esdhc-imx: add device tree probe support   Grant Likely
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Saravana Kannan
• [PATCH 2/3] at91-ohci: support overcurrent notification   Thomas Petazzoni
• [PATCH 2/3] at91-ohci: support overcurrent notification   Alan Stern
• [PATCH v3 4/4] mmc: sdhci-esdhc-imx: add device tree probe support   Anton Vorontsov
• [PATCH] ARM: Tegra: Trimslice: Tri-state DAP2 pinmux   Stephen Warren
• [PATCH] i2c: tegra: Use engineering names in DT compatible property   Stephen Warren
• [PATCH] ARM: Tegra: Trimslice: Tri-state DAP2 pinmux   Thierry Reding
• [GIT PULL] ARM: kprobes: Add support for Thumb-2   Tixy
• AT91 SDIO WiFi no working   Paulo Fragoso
• [PATCH] ARM: Tegra: Trimslice: Tri-state DAP2 pinmux   Stephen Warren
• [PATCH] ARM: Tegra: Seaboard: Fix I2C bus numbering for ADT7461   Stephen Warren
• [PATCH 2/2] ARM: Tegra: Seaboard: Re-order sdhci device registration   Stephen Warren
• [PATCH 2/2] ARM: Tegra: Seaboard: Re-order sdhci device registration   Stephen Warren
• [RFC 0/6] watchdog drivers converted to the new framework   Wolfram Sang
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Greg KH
• [PATCH 1/2] ARM: Tegra: Harmony: Register and configure WM8903 IRQ GPIO   Stephen Warren
• [PATCH 2/2] ARM: Tegra: Harmony: Add USB device   Stephen Warren
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Arnd Bergmann
• [PATCH] new helper to define common struct resource constructs   Andrew Morton
• [PATCH] new helper to define common struct resource constructs   Arnd Bergmann
• [PATCH 1/2] ARM: Tegra: Seaboard board updates for audio   Stephen Warren
• [PATCH 2/2] ARM: Tegra: Seaboard: Add USB devices   Stephen Warren
• [PATCH] new helper to define common struct resource constructs   H Hartley Sweeten
• [PATCH v2] ARM: Tegra: Trimslice: Tri-state DAP3 pinmux   Stephen Warren
• [PATCH 2/3] ARM: Call idle notifiers   Todd Poynor
• [PATCH 1/4] dt: omap3: add SoC file for handling i2c controllers   Grant Likely
• [PATCH 1/4] dt: omap3: add SoC file for handling i2c controllers   Grant Likely
• [PATCH 2/4] dt: OMAP3: Beagle board: set clock freq for i2c devices   Grant Likely
• [PATCH 0/9] PL08x further cleanups   Koul, Vinod
• [PATCH 3/4] dt: omap3: add generic board file for dt support   Grant Likely
• [PATCH 1/2] ARM: Tegra: Seaboard board updates for audio   Olof Johansson
• [PATCH 2/2] ARM: Tegra: Seaboard: Add USB devices   Olof Johansson
• [PATCH 4/4] dt: i2c-omap: Convert i2c driver to use device tree   Grant Likely
• [PATCH] dmaengine: mxs-dma: skip request_irq for NO_IRQ   Koul, Vinod
• [PATCH] i2c: tegra: Use engineering names in DT compatible property   Grant Likely
• [PATCH V2 12/12] ASoC: Samsung: Update DMA interface   Mark Brown
• [PATCH 3/7] DMA: PL330: Add DMA capabilities   boojin
• [PATCH] ARM: EXYNOS4: Add platform device for dwmci driver.   Seungwon Jeon
• IRQCHIP_MASK_ON_SUSPEND and the gic   Colin Cross
• [PATCH 07/15] pxa25x_udc: drop support for udc_command   Eric Miao
• [alsa-devel] [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Dong Aisheng-B29396
• [alsa-devel] [PATCH V2 02/10] ASoc: mxs: add mxs-saif driver   Mark Brown
• [PATCH 1/4] dt: omap3: add SoC file for handling i2c controllers   G, Manjunath Kondaiah
• [PATCH 2/2] pinmux: add a driver for the U300 pinmux   Barry Song
• [PATCH 1/4] dt: omap3: add SoC file for handling i2c controllers   G, Manjunath Kondaiah
• [PATCH 3/7] DMA: PL330: Add DMA capabilities   Jassi Brar
• [alsa-devel] [PATCH V2 02/10] ASoc: mxs: add mxs-saif driver   Dong Aisheng-B29396
• [PATCH 1/4] ARM: davinci: Check for NULL return from irq_alloc_generic_chip   Nori, Sekhar
• [PATCH v4 13/20] gpio/omap: cleanup omap_gpio_mod_init function   Todd Poynor
• [PATCH 1/2] drivers: create a pinmux subsystem v3   Barry Song
• [PATCH v4 13/20] gpio/omap: cleanup omap_gpio_mod_init function   DebBarma, Tarun Kanti
• [PATCH v4 18/20] gpio/omap: use pm-runtime framework   Todd Poynor
• ARM cortex A9 feature   naveen yadav
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Lee Jones
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Colin Cross
• [PATCH v4 18/20] gpio/omap: use pm-runtime framework   DebBarma, Tarun Kanti
• [PATCH 1/3] ARM: OMAP4: Add pcm049 to Kconfig/Makefile   Tony Lindgren
• [PATCH] ARM: OMAP4: PCM049: remove vusim regulator   Tony Lindgren
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Russell King - ARM Linux
• [PATCH 1/3] ARM: OMAP4: Add pcm049 to Kconfig/Makefile   Tony Lindgren
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Colin Cross
• [PATCH v3] new helper to define common struct resource constructs   Uwe Kleine-König
• [PATCH] USB: s3c2410_udc: fix unterminated platform_device_id table   Sebastian Andrzej Siewior
• [PATCH] ARM: OMAP4: PCM049: remove vusim regulator   Jan Weitzel
• [PATCH] omap2+: Use Kconfig symbol in Makefile instead of obj-y   Tony Lindgren
• [PATCH 3/7] DMA: PL330: Add DMA capabilities   boojin
• [PATCH 0/1 V2] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Wolfgang BETZ
• [PATCH 1/1 V2] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Wolfgang BETZ
• [PATCH 1/2] ARM: pxa168: gplugD: Get rid of mfp-gplugd.h   Tanmay Upadhyay
• [PATCH 2/2] ARM: pxa168: gplugD: bug-fix: Free correct GPIO   Tanmay Upadhyay
• Lockup with: "ARM: DMA: steal memory for DMA coherent mappings"   Mark Rutland
• [PATCH v2] ARM: EXYNOS4: Add platform device for dwmci driver.   Seungwon Jeon
• [PATCH 1/1 V2] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Will Deacon
• [PATCH 1/1 V2] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Frank Hofmann
• [alsa-devel] [PATCH V2 02/10] ASoc: mxs: add mxs-saif driver   Dong Aisheng-B29396
• [alsa-devel] [PATCH V2 02/10] ASoc: mxs: add mxs-saif driver   Mark Brown
• [PATCH 2/6] ARM: S5P64X0: Add register base and IRQ for Framebuffer   Marek Szyprowski
• CMOS camera interface on ARM   GIGIN JOSE
• [PATCH v3] new helper to define common struct resource constructs   Lothar Waßmann
• [PATCH 1/1 V2] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Will Deacon
• [alsa-devel] [RFC PATCH] ASoC: codecs: add codec driver for MFD mc13783   Mark Brown
• [PATCH v3] pxa2xx_spi: fix memory corruption   Vasily Khoruzhick
• [PATCH v3] pxa2xx_spi: fix memory corruption   Marek Vasut
• [PATCH 1/2] ARM: Tegra: Harmony: Register and configure WM8903 IRQ GPIO   Mark Brown
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCH V2 01/10] ASoc: mxs: add mxs-pcm driver   Wolfram Sang
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Arnd Bergmann
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Lee Jones
• [PATCH 0/6] ARM: S5P64X0: Add Framebuffer support   Ajay Kumar
• [PATCH 1/6] video: s3c-fb: Add S5P64X0 specific s3c_fb_driverdata   Ajay Kumar
• [PATCH 2/6] ARM: S5P64X0: Add register base and IRQ for Framebuffer   Ajay Kumar
• [PATCH 3/6] ARM: S5P64X0: Set s3c_device_fb name   Ajay Kumar
• [PATCH 4/6] ARM: S5P64X0: Add GPIO and SPCON settings for LCD   Ajay Kumar
• [PATCH 5/6] ARM: S5P6440: Add LCD-LTE480 and enable Framebuffer support   Ajay Kumar
• [PATCH 6/6] ARM: S5P6450: Add LCD-LTE480 and enable Framebuffer support   Ajay Kumar
• [PATCH V2 10/10] ARM: mxs-dma: include <linux/dmaengine.h>   Wolfram Sang
• [PATCH v3 0/6] ARM: make mach/hardware.h optional   Arnd Bergmann
• [PATCH 1/2] ARM: Tegra: Harmony: Register and configure WM8903 IRQ GPIO   Stephen Warren
• [PATCH v2] mtd: dataflash: add device tree probe support   Shawn Guo
• [PATCH 0/2] Add device tree probe for i2c-imx driver   Shawn Guo
• [PATCH 1/2] i2c/imx: remove init/exit hooks from platform data   Shawn Guo
• [PATCH 2/2] i2c/imx: add device tree probe support   Shawn Guo
• [alsa-devel] [PATCH V2 02/10] ASoc: mxs: add mxs-saif driver   Dong Aisheng
• [PATCH 0/2] Add device tree probe for imx-sdma driver   Shawn Guo
• [PATCH 1/2] dmaengine: imx-sdma: use platform_device_id to identify sdma version   Shawn Guo
• [PATCH 2/2] dmaengine: imx-sdma: add device tree probe support   Shawn Guo
• [alsa-devel] [PATCH V2 01/10] ASoc: mxs: add mxs-pcm driver   Dong Aisheng
• ARM cortex A9 feature   Dave Hylands
• [PATCH v2] mtd: dataflash: add device tree probe support   Mike Frysinger
• [GIT PULL] ARM: Cavium CNS3xxx updates for 3.1   Anton Vorontsov
• [RFC 0/6] watchdog drivers converted to the new framework   H Hartley Sweeten
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Saravana Kannan
• [PATCH v2] mtd: dataflash: add device tree probe support   Dmitry Eremin-Solenikov
• [PATCH] i2c: tegra: Use engineering names in DT compatible property   Stephen Warren
• [PATCH 07/15] pxa25x_udc: drop support for udc_command   Robert Jarzmik
• [RFC 0/6] watchdog drivers converted to the new framework   Wolfram Sang
• CMOS camera interface on ARM   Guennadi Liakhovetski
• [Linaro-mm-sig] [RFC 2/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping   Ramirez Luna, Omar
• [RFC 0/6] watchdog drivers converted to the new framework   H Hartley Sweeten
• [PATCH 07/15] pxa25x_udc: drop support for udc_command   Robert Jarzmik
• ARM cortex A9 feature   Russell King - ARM Linux
• [RFC 0/6] watchdog drivers converted to the new framework   Wolfram Sang
• [RFC 0/6] watchdog drivers converted to the new framework   H Hartley Sweeten
• [PATCH 1/2] TI816X: Add minimal hwmod data   Kevin Hilman
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Colin Cross
• [PATCH 1/7] at91rm9200: emac move register header to drivers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] at91/i2c: move register header to drivers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 3/7] at91_mci: move register header to drivers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] at91: remove non used at91_spi.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 5/7] at91: remove non used at91_ssc.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 6/7] at91rm9200/rtc: move register header to drivers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 7/7] at91sam9/wdt: move register header to drivers   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] ARM: Tegra: Harmony: Register and configure WM8903 IRQ GPIO   Mark Brown
• [PATCH 3/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Lennert Buytenhek
• [PATCH 1/2] TI816X: Add minimal hwmod data   Pedanekar, Hemant
• [PATCH v2] ARM: EXYNOS4: Add platform device for dwmci driver.   Kyungmin Park
• [GIT PULL] Tegra updates for v3.1   Colin Cross
• [PATCH v2 1/5] dt: add of_alias_scan and of_alias_get_id   Grant Likely
• [PATCH v3] pxa2xx_spi: fix memory corruption   Grant Likely
• [PATCH 1/6] clk: Prototype and document clk_register()   Grant Likely
• [PATCH 6/6] clk: Add initial WM831x clock driver   Grant Likely
• [PATCH v2 1/7] spi/imx: do not make copy of spi_imx_devtype_data   Grant Likely
• [PATCH v2 2/7] spi/imx: use mx21 to name SPI_IMX_VER_0_0 function and macro   Grant Likely
• [PATCH v2 5/7] spi/imx: use soc name in spi device type naming scheme   Grant Likely
• [PATCH v2 3/7] spi/imx: do not use spi_imx2_3 to name SPI_IMX_VER_2_3 function and macro   Grant Likely
• [PATCH v2 7/7] spi/imx: add device tree probe support   Grant Likely
• [PATCH V2 05/12] ARM: SAMSUNG: Add common DMA operations   Grant Likely
• [PATCH v2] mtd: dataflash: add device tree probe support   Grant Likely
• [PATCH v2] mtd: dataflash: add device tree probe support   Grant Likely
• [PATCH 1/2] i2c/imx: remove init/exit hooks from platform data   Grant Likely
• [PATCH 2/2] i2c/imx: add device tree probe support   Grant Likely
• [PATCH 1/2] dmaengine: imx-sdma: use platform_device_id to identify sdma version   Grant Likely
• [PATCH 2/2] dmaengine: imx-sdma: add device tree probe support   Grant Likely
• [PATCH V8 0/4] pxa3xx_nand: add two chip select support   Lei Wen
• [PATCH V8 1/4] MTD: pxa3xx_nand: enhance suspend and resume routine   Lei Wen
• [PATCH V8 2/4] MTD: pxa3xx_nand: convert all printk into dev_*   Lei Wen
• [PATCH V8 3/4] MTD: pxa3xx_nand: sperate each chip individual info   Lei Wen
• [PATCH V8 4/4] MTD: pxa3xx_nand: enable multiple chip select support   Lei Wen
• [PATCH v2] mtd: dataflash: add device tree probe support   Shawn Guo
• [PATCH V2 03/12] DMA: PL330: Add DMA capabilities   Chanho Park
• [PATCH v2] mtd: dataflash: add device tree probe support   Shawn Guo
• [PATCH 6/6] clk: Add initial WM831x clock driver   Mark Brown
• [PATCH 6/6] clk: Add initial WM831x clock driver   Ryan Mallon
• ARM cortex A9 feature   naveen yadav
• [PATCH 2/6] ARM: S5P64X0: Add register base and IRQ for Framebuffer   Ajay kumar
• ARM cortex A9 feature   Dave Hylands
• [PATCH 0/6] ARM: S5P64X0: Add Framebuffer support   Tushar Behera
• [PATCH 2/3] mach-ux500: export System-on-Chip information via sysfs   Lee Jones
• [PATCH 0/6] ARM: S5P64X0: Add Framebuffer support   Ajay kumar
• [Linaro-mm-sig] [RFC 2/2] ARM: initial proof-of-concept IOMMU mapper for DMA-mapping   Marek Szyprowski
• [alsa-devel] [PATCH V2 01/10] ASoc: mxs: add mxs-pcm driver   Dong Aisheng-B29396
• [PATCH] ARM: S5P64X0: External Interrupt Support   Padmavathi Venna
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Petr Štetiar
• [PATCH 6/6] ARM: S5P6450: Add LCD-LTE480 and enable Framebuffer support   Ajay kumar
• [PATCH v2] ARM: EXYNOS4: Add platform device for dwmci driver.   Seungwon Jeon
• [PATCH v2] ARM: EXYNOS4: Add platform device for dwmci driver.   Kyungmin Park
• [PATCH 2/7] at91/i2c: move register header to drivers   Jean Delvare
• [PATCH 2/2] dmaengine: imx-sdma: add device tree probe support   Sascha Hauer
• [PATCH] ARM: OMAP4: PCM049: remove vusim regulator   Tony Lindgren
• [PATCH] OMAP: powerdomains: Make all powerdomain target states as ON at init   Paul Walmsley
• [PATCH 2/2] dmaengine: imx-sdma: add device tree probe support   Shawn Guo
• [PATCH 1/1] ARM: i.MX50/53: debug-macro: fix UART_PADDR   Sascha Hauer
• [PATCH] ARM: OMAP4: PCM049: remove vusim regulator   Felipe Balbi
• [PATCH 1/2] i2c/imx: remove init/exit hooks from platform data   Sascha Hauer
• [PATCH 1/2] dmaengine: imx-sdma: use platform_device_id to identify sdma version   Sascha Hauer
• [PATCH] OMAP: powerdomains: Make all powerdomain target states as ON at init   Felipe Balbi
• [PATCH] OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup   Paul Walmsley
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Russell King - ARM Linux
• [PATCH] OMAP: powerdomains: Make all powerdomain target states as ON at init   Paul Walmsley
• [PATCH v3] pxa2xx_spi: fix memory corruption   Russell King - ARM Linux
• [PATCH] OMAP: powerdomains: Make all powerdomain target states as ON at init   Felipe Balbi
• [PATCH] ARM: OMAP4: PCM049: remove vusim regulator   Tony Lindgren
• [PATCH 1/2] dmaengine: imx-sdma: use platform_device_id to identify sdma version   Shawn Guo
• [PATCH] OMAP: powerdomains: Make all powerdomain target states as ON at init   Paul Walmsley
• [PATCH 1/2] dmaengine: imx-sdma: use platform_device_id to identify sdma version   Sascha Hauer
• [PATCH] ARM: OMAP4: PCM049: remove vusim regulator   Felipe Balbi
• [PATCH] OMAP: powerdomains: Make all powerdomain target states as ON at init   Felipe Balbi
• [PATCH v3] mtd: dataflash: add device tree probe support   Shawn Guo
• [PATCH] ARM: S5P: Remove sysmmu driver from arch tree   KyongHo Cho
• [PATCH] ARM: S5P64X0: External Interrupt Support   Russell King - ARM Linux
• [PATCH 1/2] ARM: tegra: remove copy-and-pasted i2c platform data in boards   Marc Dietrich
• [PATCH 2/2] ARM: tegra: remove copy-and-pasted usb platform data from boards   Marc Dietrich
• [GIT PULL] more i.MX fixes   Sascha Hauer
• [PATCH 3/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Russell King - ARM Linux
• [PATCH V2 00/16] omap_hsmmc patches   Grazvydas Ignotas
• [PATCH v2] ARM: EXYNOS4: Add platform device for dwmci driver.   Seungwon Jeon
• [PATCH v2 0/3] Add device tree probe for imx-sdma driver   Shawn Guo
• [PATCH v2 1/3] dmaengine: imx-sdma: use platform_device_id to identify sdma version   Shawn Guo
• [PATCH v2 2/3] dmaengine: imx-sdma: sdma_get_firmware does not need to copy fw_name   Shawn Guo
• [PATCH v2 3/3] dmaengine: imx-sdma: add device tree probe support   Shawn Guo
• [PATCH] ARM: OMAP4: PCM049: remove vusim regulator   Jan Weitzel
• [PATCH 2/2] ARM: tegra: remove copy-and-pasted usb platform data from boards   Heiko Stübner
• [GIT PULL] minimal omap4460 support for v3.1 merge window   Vishwanath Sripathy
• [PATCH 0/6] ARM: S5P64X0: Add Framebuffer support   Tushar Behera
• [PATCH 0/3] ARM: tegra: paz00: Add Wifi and second serial port support   Marc Dietrich
• [PATCH 1/3] ARM: tegra: paz00: add support serial port on JP1   Marc Dietrich
• [PATCH 2/3] ARM: tegra: paz00: export the WIFI rfkill gpio   Marc Dietrich
• [PATCH 3/3] ARM: tegra: paz00: enable wifi led   Marc Dietrich
• [PATCH 07/15] pxa25x_udc: drop support for udc_command   Eric Miao
• [PATCH] ARM: OMAP4: PCM049: remove vusim regulator   Tony Lindgren
• [PATCH] ARM: OMAP4: PCM049: remove vusim regulator   Tony Lindgren
• [PATCH 7/7] at91sam9/wdt: move register header to drivers   Wim Van Sebroeck
• [PATCH v2] OMAP3: powerdomains: Match silicon revision to select the correct "core_pwrdm" definition   Abhilash K V
• [PATCH 4/7] at91: remove non used at91_spi.h   Detlef Vollmann
• [PATCH] ARM: S5P64X0: External Interrupt Support   padma venkat
• [PATCH v14 REPOST 00/12] dmtimer adaptation to platform_driver   Tarun Kanti DebBarma
• [PATCH v14 REPOST 01/12] OMAP2+: dmtimer: add device names to flck nodes   Tarun Kanti DebBarma
• [PATCH v14 REPOST 02/12] OMAP4: hwmod data: add dmtimer version information   Tarun Kanti DebBarma
• [PATCH v14 REPOST 03/12] OMAP1: dmtimer: conversion to platform devices   Tarun Kanti DebBarma
• [PATCH v14 REPOST 04/12] OMAP2+: dmtimer: convert to platform devices   Tarun Kanti DebBarma
• [PATCH v14 REPOST 05/12] OMAP: dmtimer: platform driver   Tarun Kanti DebBarma
• [PATCH v14 REPOST 06/12] OMAP: dmtimer: switch-over to platform device driver   Tarun Kanti DebBarma
• [PATCH v14 REPOST 07/12] OMAP: dmtimer: pm_runtime support   Tarun Kanti DebBarma
• [PATCH v14 REPOST 08/12] OMAP: dmtimer: add timeout to low-level routines   Tarun Kanti DebBarma
• [PATCH v14 REPOST 09/12] OMAP: dmtimer: use mutex instead of spinlock   Tarun Kanti DebBarma
• [PATCH v14 REPOST 10/12] OMAP: dmtimer: mark clocksource and clockevent timers reserved   Tarun Kanti DebBarma
• [PATCH v14 REPOST 11/12] OMAP: dmtimer: add context save/restore routines   Tarun Kanti DebBarma
• [PATCH v14 REPOST 12/12] OMAP: dmtimer: Off mode support   Tarun Kanti DebBarma
• [PATCH v3 00/10] ARM: mxs: add audio support   Dong Aisheng
• [PATCH v3 01/10] ASoc: mxs: add mxs-pcm driver   Dong Aisheng
• [PATCH v3 02/10] ASoc: mxs: add mxs-saif driver   Dong Aisheng
• [PATCH v3 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Dong Aisheng
• [PATCH v3 04/10] ASoc: mxs: add asoc configuration files   Dong Aisheng
• [PATCH v3 05/10] ARM: mxs: add saif clock   Dong Aisheng
• [PATCH v3 06/10] ARM: mxs: add saif device   Dong Aisheng
• [PATCH v3 07/10] ARM: mxs: add sgtl5000 i2c device   Dong Aisheng
• [PATCH v3 08/10] ARM: mxs: add mxs-sgtl5000 device   Dong Aisheng
• [PATCH v3 09/10] ARM: mxs: correct the using of frac div for saif   Dong Aisheng
• [PATCH v3 10/10] ARM: mxs-dma: include <linux/dmaengine.h>   Dong Aisheng
• [PATCH 2/3] ARM: tegra: paz00: export the WIFI rfkill gpio   Vasily Khoruzhick
• [PATCH] ARM: S5P64X0: External Interrupt Support   Russell King - ARM Linux
• [GIT PULL] Tegra updates for v3.1   Arnd Bergmann
• ARM cortex A9 feature   Woodruff, Richard
• [PATCH V2 06/10] ARM: mxs: add saif device   Wolfram Sang
• [GIT PULL] Tegra updates for v3.1   Arnd Bergmann
• [PATCH 1/3] Framework for exporting System-on-Chip information via sysfs   Arnd Bergmann
• [GIT PULL] more i.MX fixes   Arnd Bergmann
• [GIT PULL] ARM: Cavium CNS3xxx updates for 3.1   Arnd Bergmann
• [PATCH 0/8] ARM: SAMSUNG: Add common PWM Backlight support   Banajit Goswami
• [PATCH 1/8] ARM: SAMSUNG: Create a common infrastructure for PWM backlight support   Banajit Goswami
• [PATCH 2/8] ARM: EXYNOS4: Add PWM backlight support on Samsung SMDKV310 board   Banajit Goswami
• [PATCH 3/8] ARM: EXYNOS4: Add PWM backlight support on Samsung SMDKC210 board   Banajit Goswami
• [PATCH 4/8] ARM: S5PV210: Add PWM backlight support on Samsung SMDKV210 board   Banajit Goswami
• [PATCH 5/8] ARM: S5PC100: Add PWM backlight support on Samsung SMDKC100 board   Banajit Goswami
• [PATCH 6/8] ARM: S5P64X0: Add PWM backlight support on Samsung SMDK6440 board   Banajit Goswami
• [PATCH 7/8] ARM: S5P64X0: Add PWM backlight support on Samsung SMDK6450 board   Banajit Goswami
• [PATCH 8/8] ARM: S3C64XX: Add PWM backlight support on Samsung SMDK6410 board   Banajit Goswami
• [alsa-devel] [PATCH V2 06/10] ARM: mxs: add saif device   Dong Aisheng
• [PATCH 0/3] SP805 updates for Versatile Express   Nick Bowler
• [PATCH 1/3] ARM: vexpress: Add clock definition for the SP805.   Nick Bowler
• [PATCH 2/3] watchdog: sp805: Don't write 0 to the load value register.   Nick Bowler
• [PATCH 3/3] watchdog: sp805: Flush posted writes in enable/disable.   Nick Bowler
• [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Shawn Guo
• [PATCH V2 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Mark Brown
• [PATCH v2 1/5] dt: add of_alias_scan and of_alias_get_id   Shawn Guo
• [alsa-devel] [PATCH V2 06/10] ARM: mxs: add saif device   Wolfram Sang
• [PATCH 4/7] at91: remove non used at91_spi.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 2/7] at91/i2c: move register header to drivers   Jean-Christophe PLAGNIOL-VILLARD
• [GIT PULL] Tegra updates for v3.1   Colin Cross
• [PATCH 1/1 V2] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Frank Hofmann
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Colin Cross
• [GIT PULL] Tegra updates for v3.1   Arnd Bergmann
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Russell King - ARM Linux
• Unnecessary cache-line flush on page table updates ?   Russell King - ARM Linux
• [PATCH v2] ARM: support XZ compressed kernels   Russell King - ARM Linux
• [PATCH 1/3] ARM: tegra: paz00: add support serial port on JP1   Stephen Warren
• [PATCH 4/7] at91: remove non used at91_spi.h   Detlef Vollmann
• [PATCH 2/2] ARM: tegra: remove copy-and-pasted usb platform data from boards   Colin Cross
• [PATCH 2/3] ARM: tegra: paz00: export the WIFI rfkill gpio   Stephen Warren
• [PATCH 3/3] ARM: tegra: paz00: enable wifi led   Stephen Warren
• [alsa-devel] [PATCH V2 06/10] ARM: mxs: add saif device   Dong Aisheng
• [PATCH 2/3] ARM: tegra: paz00: export the WIFI rfkill gpio   Sergei Shtylyov
• [PATCH 2/3] ARM: tegra: paz00: export the WIFI rfkill gpio   Stephen Warren
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Colin Cross
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Russell King - ARM Linux
• [PATCH 2/2] ARM: tegra: remove copy-and-pasted usb platform data from boards   Olof Johansson
• [PATCH v2] dt: add of_alias_scan and of_alias_get_id   Grant Likely
• [PATCH REPOST] ARM: fix regression in IXP4xx clocksource   Krzysztof Halasa
• [PATCH 2/2] ARM: tegra: remove copy-and-pasted usb platform data from boards   Heiko Stübner
• [PATCH v3] pxa2xx_spi: fix memory corruption   Grant Likely
• [GIT PULL] more i.MX fixes   Arnd Bergmann
• [PATCH 1/2] ARM: Tegra: Harmony: Register and configure WM8903 IRQ GPIO   Stephen Warren
• [PATCH v3] pxa2xx_spi: fix memory corruption   Russell King - ARM Linux
• [PATCH v3 00/10] ARM: mxs: add audio support   Wolfram Sang
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Colin Cross
• [PATCH 0/3] SP805 updates for Versatile Express   Wim Van Sebroeck
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Russell King - ARM Linux
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Colin Cross
• [PATCH v3] pxa2xx_spi: fix memory corruption   Grant Likely
• [PATCH 3/8] ARM: dma-mapping: use asm-generic/dma-mapping-common.h   Lennert Buytenhek
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Russell King - ARM Linux
• [PATCH] freshen up mm/proc-arm946.S   Brian Julin
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Colin Cross
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   H Hartley Sweeten
• [PATCH V2 12/12] ASoC: Samsung: Update DMA interface   Kukjin Kim
• [PATCH V2 05/12] ARM: SAMSUNG: Add common DMA operations   Boojin Kim
• [PATCH V2 05/12] ARM: SAMSUNG: Add common DMA operations   Grant Likely
• [PATCH V2 03/12] DMA: PL330: Add DMA capabilities   Boojin Kim
• [GIT PULL] ARM: make mach/hardware.h optional   Rob Herring
• [RFC 1/6] Documentation: watchdog: add guide how to convert drivers to new framework   Randy Dunlap
• [PATCH 01/52] ARM: introduce atag_offset to replace boot_params   Nicolas Pitre
• [PATCH] clocksource: convert S5PV210 32-bit down counting clocksource   Kukjin Kim
• [PATCH 3/4] ARM: samsung: Check NULL return from irq_alloc_generic_chip   Kukjin Kim
• [PATCH] clocksource: convert S5PV210 32-bit down counting clocksource   Chanwoo Choi
• [PATCHv2] clocksource: convert S5PV210/S5P64X0 32-bit down counting clocksource   Chanwoo Choi
• [PATCH] ARM: S5P: Remove sysmmu driver from arch tree   Kukjin Kim
• [PATCH v2] genirq: replace irq_gc_ack() with {set, clr}_bit variants   Kukjin Kim
• [PATCH 0/2] ARM: Samsung: I2C code cleanup   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Add support Core1 Power On/Off with hotplug in/out   Kukjin Kim
• [PATCH v3 1/6] Samsung SoC ADC: use regulator (VDD for ADC).   Kukjin Kim
• [PATCH v2] dt: add of_alias_scan and of_alias_get_id   Shawn Guo
• [PATCH V3 00/13] To use DMA generic APIs for Samsung DMA   Kukjin Kim
• [PATCH V3 01/13] DMA: PL330: Add support runtime PM for PL330 DMAC   Kukjin Kim
• [PATCH V3 02/13] DMA: PL330: Update PL330 DMA API driver   Kukjin Kim
• [PATCH V3 03/13] DMA: PL330: Add DMA capabilities   Kukjin Kim
• [PATCH V3 04/13] ARM: SAMSUNG: Update to use PL330-DMA driver   Kukjin Kim
• [PATCH V3 05/13] ARM: SAMSUNG: Add common DMA operations   Kukjin Kim
• [PATCH V3 06/13] ARM: EXYNOS4: Use generic DMA PL330 driver   Kukjin Kim
• [PATCH V3 07/13] ARM: S5PV210: Use generic DMA PL330 driver   Kukjin Kim
• [PATCH V3 08/13] ARM: S5PC100: Use generic DMA PL330 driver   Kukjin Kim
• [PATCH V3 09/13] ARM: S5P64X0: Use generic DMA PL330 driver   Kukjin Kim
• [PATCH V3 10/13] ARM: SAMSUNG: Remove S3C-PL330-DMA driver   Kukjin Kim
• [PATCH V3 11/13] spi/s3c64xx: Add support DMA engine API   Kukjin Kim
• [PATCH V3 12/13] ASoC: Samsung: Update DMA interface   Kukjin Kim
• [PATCH V3 13/13] ARM: SAMSUNG: Remove Samsung specific enum type for dma direction   Kukjin Kim
• [PATCH 0/7] ARM: EXYNOS4: Adds External GIC   Kukjin Kim
• [PATCH] ARM:SAMSUNG: DMA Cleanup as per sparse [re-submit]   Kukjin Kim
• [PATCH] ARM:SAMSUNG: DMA Cleanup as per sparse [re-submit]   Kukjin Kim
• [PATCH v3 0/6] ARM: EXYNOS4: NURI Board Configuration Update   Kukjin Kim
• [GIT PULL] Samsung fixes for 3.0   Kukjin Kim
• [PATCH] OMAP: powerdomains: Make all powerdomain target states as ON at init   Santosh Shilimkar
• [PATCH] OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup   Santosh Shilimkar
• [PATCH 3/4] TI816X: clock: Add clockdomains and powerdomains data   Paul Walmsley
• [PATCH 2/4] TI816X: clock: Add clock data   Paul Walmsley
• [PATCH 1/2] TI816X: Add minimal hwmod data   Paul Walmsley
• [PATCH v4 REPOST 00/20] gpio/omap: driver cleanup and fixes   Tarun Kanti DebBarma
• [PATCH v4 REPOST 01/20] gpio/omap: remove dependency on gpio_bank_count   Tarun Kanti DebBarma
• [PATCH v4 REPOST 02/20] gpio/omap: use flag to identify wakeup domain   Tarun Kanti DebBarma
• [PATCH v4 REPOST 03/20] gpio/omap: make gpio_context part of gpio_bank structure   Tarun Kanti DebBarma
• [PATCH v4 REPOST 04/20] gpio/omap: fix pwrdm_post_transition call sequence   Tarun Kanti DebBarma
• [PATCH v4 REPOST 05/20] gpio/omap: handle save/restore ctx in GPIO driver   Tarun Kanti DebBarma
• [PATCH v4 REPOST 06/20] gpio/omap: make non-wakeup GPIO part of pdata   Tarun Kanti DebBarma
• [PATCH v4 REPOST 07/20] gpio/omap: avoid cpu checks during module ena/disable   Tarun Kanti DebBarma
• [PATCH v4 REPOST 08/20] gpio/omap: further cleanup using wakeup_status register   Tarun Kanti DebBarma
• [PATCH v4 REPOST 09/20] gpio/omap: cleanup omap1 related macros   Tarun Kanti DebBarma
• [PATCH v4 REPOST 10/20] gpio/omap: use level/edge detect reg offsets   Tarun Kanti DebBarma
• [PATCH v4 REPOST 11/20] gpio/omap: remove hardcoded offsets in ctxt save/restore   Tarun Kanti DebBarma
• [PATCH v4 REPOST 12/20] gpio/omap: cleanup set_gpio_triggering function   Tarun Kanti DebBarma
• [PATCH v4 REPOST 13/20] gpio/omap: cleanup omap_gpio_mod_init function   Tarun Kanti DebBarma
• [PATCH v4 REPOST 14/20] gpio/omap: use pinctrl offset instead of macro   Tarun Kanti DebBarma
• [PATCH v4 REPOST 15/20] gpio/omap: use readl in irq_handler for all access   Tarun Kanti DebBarma
• [PATCH v4 REPOST 16/20] gpio/omap: remove bank->method & METHOD_* macros   Tarun Kanti DebBarma
• [PATCH v4 REPOST 17/20] gpio/omap: fix bankwidth for OMAP7xx MPUIO   Tarun Kanti DebBarma
• [PATCH v4 REPOST 18/20] gpio/omap: use pm-runtime framework   Tarun Kanti DebBarma
• [PATCH v4 REPOST 19/20] gpio/omap: optimize suspend and resume functions   Tarun Kanti DebBarma
• [PATCH v4 REPOST 20/20] gpio/omap: cleanup prepare_for_idle and resume_after_idle   Tarun Kanti DebBarma
• [PATCH 4/7] at91: remove non used at91_spi.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] at91: remove non used at91_spi.h   Wolfram Sang
• [PATCH 4/7] at91: remove non used at91_spi.h   Detlef Vollmann
• [PATCH 4/7] at91: remove non used at91_spi.h   Detlef Vollmann
• [PATCH v2] ARM: support XZ compressed kernels   Imre Kaloz
• [PATCH 1/3] ARM: tegra: paz00: add support serial port on JP1   Marc Dietrich
• [PATCH 3/3] ARM: tegra: paz00: enable wifi led   Marc Dietrich
• [PATCH v4 REPOST 13/20] gpio/omap: cleanup omap_gpio_mod_init function   Todd Poynor
• [PATCH v4 REPOST 18/20] gpio/omap: use pm-runtime framework   Todd Poynor
• [PATCH 3/4] dt: omap3: add generic board file for dt support   G, Manjunath Kondaiah
• [patch 0/3] imx: Efika: Add pata device   Arnaud Patard (Rtp)
• [patch 1/3] imx51: add pata device   Arnaud Patard (Rtp)
• [patch 2/3] imx51: add pata clock   Arnaud Patard (Rtp)
• [patch 3/3] imx: efika: Enable pata.   Arnaud Patard (Rtp)
• [patch 1/3] imx51: add pata device   Uwe Kleine-König
• [patch 3/3] imx: efika: Enable pata.   Uwe Kleine-König
• [PATCH] ARM: move memory layout sanity checking before meminfo initialization   Nicolas Pitre
• [PATCH 4/7] at91: remove non used at91_spi.h   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 4/7] at91: remove non used at91_spi.h   Jean-Christophe PLAGNIOL-VILLARD
• [alsa-devel] [PATCH v3 00/10] ARM: mxs: add audio support   Dong Aisheng
• [PATCH 3/4] dt: omap3: add generic board file for dt support   Grant Likely
• [PATCH v2] ARM: davinci: Check for NULL return from irq_alloc_generic_chip   Todd Poynor
• [PATCH v4] OMAP4: hwmod data: I2C: add flag for context restore   Shubhrajyoti D
• [PATCH] omap1: select GENERIC_IRQ_CHIP for TI OMAP1   Axel Lin
• conflicts between omap/cleanup branch and omap_dss2 tree   Arnd Bergmann
• [PATCH v4 2/2] ARM: l2x0: Add OF based initialization   Rob Herring
• [PATCH 1/3] ARM: S5P64X0: Add HSMMC setup for host Controller   Kukjin Kim
• [PATCH] watchdog: imx2_wdt: add device tree probe support   Shawn Guo
• [GIT PULL] DaVinci fix for v3.0   Nori, Sekhar
• [PATCH V3 11/13] spi/s3c64xx: Add support DMA engine API   Grant Likely
• [PATCH 1/1] fix card interrupt losing issue on freescale eSDHC   Tony Lin
• [PATCH v2 2/3] ARM: EXYNOS4: Add sclk_spdif clocks.   Kukjin Kim
• [PATCH v2 1/3] ARM: Samsung: Move duplicate code   Kukjin Kim
• [PATCH] ARM: S5P64X0: External Interrupt Support   padma venkat
• [PATCH v2 3/3] ARM: EXYNOS4: Add EPLL clock operations   Kukjin Kim
• [PATCH v2] DT: Use helper function to read u32 values   G, Manjunath Kondaiah
• [PATCH 2/2] ARM: pxa168: gplugD: bug-fix: Free correct GPIO   Eric Miao
• [PATCH 1/2] ARM: pxa168: gplugD: Get rid of mfp-gplugd.h   Eric Miao
• [PATCH] ARM: mmp/brownstone: add regulator init data for max8925   Leo Yan
• [PATCHv2] clocksource: convert S5PV210/S5P64X0 32-bit down counting clocksource   Kukjin Kim
• [PATCH 4/5] ARM: EXYNOS4: Add SPDIF for SMDKV310   Kukjin Kim
• [PATCH] ARM: mmp/brownstone: add regulator init data for max8925   Haojian Zhuang
• [PATCH 0/3] ARM: USB: Add support for USB HCD on PXA168   Tanmay Upadhyay
• [PATCH 1/3] ARM: pxa168: Remove MTD specific headers   Tanmay Upadhyay
• [PATCH 2/3] USB: pxa168: Add onchip USB host controller support   Tanmay Upadhyay
• [PATCH 3/3] ARM: pxa168: Add USB support for gplugD board   Tanmay Upadhyay
• [PATCH] ARM: EXYNOS4: Add support AFTR mode on EXYNOS4210   Kukjin Kim
• [PATCH] ARM: mmp/brownstone: add regulator init data for max8925   Leo Yan
• [PATCH 4/7] at91: remove non used at91_spi.h   Andrew Victor
• [GIT PULL] ARM: consolidate clkdev header files for v3.1   Kyungmin Park
• [PATCH 1/3] ARM: pxa168: Remove MTD specific headers   Eric Miao
• [PATCH] dmaengine: add dma_ctrl_cmd to pass buffer stride configuration   Raju, Sundaram
• [PATCH v3] pxa2xx_spi: fix memory corruption   Vasily Khoruzhick
• [PATCH 2/2] ARM: EXYNOS4: Add more registers to be saved and restored for PM   Kukjin Kim
• [PATCH V2 0/8] ARM: EXYNOS4: Update PM   Kukjin Kim
• conflicts between omap/cleanup branch and omap_dss2 tree   Tony Lindgren
• [PATCH 07/15] pxa25x_udc: drop support for udc_command   Felipe Balbi
• [PATCH 3/4] dt: omap3: add generic board file for dt support   Tony Lindgren
• [PATCH 0/3] SP805 updates for Versatile Express   Russell King - ARM Linux
• seria port communication on linux with rts signal   Ravi
• [PATCH V3 12/13] ASoC: Samsung: Update DMA interface   Mark Brown
• seria port communication on linux with rts signal   Russell King - ARM Linux
• [PATCH v3] pxa2xx_spi: fix memory corruption   Russell King - ARM Linux
• [PATCH 3/4] dt: omap3: add generic board file for dt support   G, Manjunath Kondaiah
• [PATCH V2 0/8] ARM: EXYNOS4: Update PM   Russell King - ARM Linux
• [PATCH 1/3] ARM: S5P64X0: Add HSMMC setup for host Controller   Russell King - ARM Linux
• [PATCH] freshen up mm/proc-arm946.S   Dave Martin
• linux-next regression on ARM926   Linus Walleij
• [PATCH 0/2] Add audio sram support   Leo Yan
• [PATCH 1/2] ARM: mmp: register audio sram device   Leo Yan
• [PATCH 2/2] ARM: mmp: add audio sram allocator   Leo Yan
• [PATCH v2 2/3] ARM: EXYNOS4: Add sclk_spdif clocks.   Naveen Krishna Ch
• linux-next regression on ARM926   Russell King - ARM Linux
• [PATCH V3 00/13] To use DMA generic APIs for Samsung DMA   Jassi Brar
• [PATCH v2 3/3] ARM: EXYNOS4: Add EPLL clock operations   Naveen Krishna Ch
• [PATCH 1/1 V2] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Will Deacon
• [PATCH 0/2] Add audio sram support   Haojian Zhuang
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Lothar Waßmann
• [PATCH] omap1: select GENERIC_IRQ_CHIP for TI OMAP1   Kevin Hilman
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Ivan Djelic
• [PATCH] ARM: cache: detect PIPT I-cache using CTR   Will Deacon
• linux-next regression on ARM926   Linus Walleij
• [PATCH 11/10] arm: mxs: mx28evk: add fixed regulators for audio   Wolfram Sang
• [GIT PULL] ARM: make mach/hardware.h optional   Arnd Bergmann
• Merge plans: what's im arm-soc.git for 3.1   Arnd Bergmann
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Shawn Guo
• [PATCH 0/2] add device tree probe support for gpio_keys   Shawn Guo
• [PATCH 1/2] Input: gpio-keys: do not reference platform_data after .probe exits   Shawn Guo
• [PATCH 2/2] Input: gpio-keys: add device tree probe support   Shawn Guo
• [PATCH 1/2] Input: gpio-keys: do not reference platform_data after .probe exits   Dmitry Torokhov
• [PATCH 2/2] Input: gpio-keys: add device tree probe support   Dmitry Torokhov
• [PATCH 1/1 V2] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Will Deacon
• [PATCH 1/2] Input: gpio-keys: do not reference platform_data after .probe exits   Grant Likely
• [PATCH 1/2] Input: gpio-keys: do not reference platform_data after .probe exits   Dmitry Torokhov
• [PATCH] CNS3xxx: add SMP support   Imre Kaloz
• [PATCH] orion5x: fixup 5181 MPP mask check   Imre Kaloz
• Git pull request: removal of ARM_DMA_ZONE_SIZE   Nicolas Pitre
• [PATCH] CNS3xxx: add SMP support   Russell King - ARM Linux
• [PATCH] orion5x: fixup 5181 MPP mask check   Nicolas Pitre
• [PATCH v3 00/10] ARM: mxs: add audio support   Wolfram Sang
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Pavel Machek
• [PATCH v2 0/2] Simple irq_domain implementation   Grant Likely
• [PATCH v2 1/2] irq: add irq_domain translation infrastructure   Grant Likely
• [PATCH v2 2/2] dt/irq: add irq_domain_generate_simple() helper   Grant Likely
• [PATCH] freshen up mm/proc-arm946.S   Brian Julin
• [PATCH 1/2] ARM: conditionally allow master CPU hotplugging   Mike Turquette
• [PATCH 1/2] Input: gpio-keys: do not reference platform_data after .probe exits   Shawn Guo
• [PATCH 2/2] Input: gpio-keys: add device tree probe support   Shawn Guo
• [alsa-devel] [PATCH v3 00/10] ARM: mxs: add audio support   Shawn Guo
• [PATCH v3 0/4] Add device tree probe for sdhci-esdhc-imx   Chris Ball
• [PATCH 0/2] Add audio sram support   Leo Yan
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Huang Shijie
• [PATCH 0/7] support DT on ARCH-MMP   Haojian Zhuang
• [PATCH 1/7] ARM: mmp: parse irq from DT   Haojian Zhuang
• [PATCH 2/7] ARM: mmp: append MMP_USE_OF config   Haojian Zhuang
• [PATCH 3/7] ARM: mmp: support DT on both dkb and brownstone   Haojian Zhuang
• [PATCH 4/7] tty: serial: support device tree in pxa   Haojian Zhuang
• [PATCH 5/7] tty: serial: check ops before registering console   Haojian Zhuang
• [PATCH 6/7] i2c: pxa: support i2c controller from DT   Haojian Zhuang
• [PATCH 7/7] i2c: pxa: support to parse property   Haojian Zhuang
• [alsa-devel] [PATCH v3 00/10] ARM: mxs: add audio support   Dong Aisheng
• [PATCH] davinci: fix DM365 EVM video input mux bits   Jon Povey
• [PATCH] gpio/mxc/mxs: fix build error introduced by the reanming of irq_gc_ack()   Shawn Guo
• [PATCH 2/2] Input: gpio-keys: add device tree probe support   Shawn Guo
• [PATCH 1/1] ARM: mxs-dma: reset after disable channel   Shawn Guo
• [PATCH 1/1] ARM: mxs-dma: reset after disable channel   Dong Aisheng
• [PATCH v4 06/10] ARM: mxs: add saif device   Dong Aisheng
• [PATCH v4 07/10] ARM: mxs: add sgtl5000 i2c device   Dong Aisheng
• [PATCH v4 08/10] ARM: mxs: add mxs-sgtl5000 device   Dong Aisheng
• Git pull request: boot_params to atag_offset conversion   Nicolas Pitre
• [PATCH] davinci: fix DM365 EVM video input mux bits   Hadli, Manjunath
• [RFC 7/8] drivers: introduce rpmsg, a remote-processor messaging bus   Ohad Ben-Cohen
• [PATCH] ARM: mmp: share spi driver for ARCH-MMP   Haojian Zhuang
• [PATCH 3/4] dt: omap3: add generic board file for dt support   G, Manjunath Kondaiah
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Lothar Waßmann
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Lothar Waßmann
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Lothar Waßmann
• [PATCH 2/2] ARM: EXYNOS4: Add more registers to be saved and restored for PM   MyungJoo Ham
• [PATCH v2 2/2] ARM: EXYNOS4: Add more registers to be saved and restored for PM   MyungJoo Ham
• [PATCH v9 11/12] mmc: core: add random fault injection   Per Forlin
• [PATCH] davinci: fix DM365 EVM video input mux bits   Jon Povey
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Ivan Djelic
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Huang Shijie
• [PATCH 0/7] support DT on ARCH-MMP   Jean Delvare
• [PATCH] davinci: fix DM365 EVM video input mux bits   Hadli, Manjunath
• Git pull request: boot_params to atag_offset conversion   Russell King - ARM Linux
• [PATCH 1/2] Input: gpio-keys: do not reference platform_data after .probe exits   Russell King - ARM Linux
• [PATCH v3 0/4] Add device tree probe for sdhci-esdhc-imx   Sascha Hauer
• [PATCH 1/1] ARM: mxs-dma: reset after disable channel   Wolfram Sang
• [RFC PATCH 04/15] ARM: perf: remove active_mask   Mark Rutland
• [PATCH 1/1] ARM: mxs-dma: reset after disable channel   Shawn Guo
• [PATCH 1/2] Input: gpio-keys: do not reference platform_data after .probe exits   Shawn Guo
• [PATCH] davinci: fix DM365 EVM video input mux bits   Nori, Sekhar
• [PATCH v3 0/4] Add device tree probe for sdhci-esdhc-imx   Shawn Guo
• [PATCH] davinci: fix DM365 EVM video input mux bits   Nori, Sekhar
• [PATCH 1/1 V2] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Frank Hofmann
• [GIT PULL] DaVinci fix for v3.0   Nori, Sekhar
• [PATCH 1/1] ARM: mxs-dma: reset after disable channel   Wolfram Sang
• [PATCH v2] ARM: davinci: Check for NULL return from irq_alloc_generic_chip   Nori, Sekhar
• [PATCH 1/1] ARM: mxs-dma: reset after disable channel   Dong Aisheng-B29396
• [GIT PULL v2] DaVinci fixes for v3.0   Nori, Sekhar
• [PATCH 2/3] USB: pxa168: Add onchip USB host controller support   Tanmay Upadhyay
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Lothar Waßmann
• [PATCH 7/7] i2c: pxa: support to parse property   Eric Miao
• [PATCH 1/1 V2] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Russell King - ARM Linux
• [PATCH] davinci: fix DM365 EVM video input mux bits   Hadli, Manjunath
• linux-next regression on ARM926   Dave Martin
• [PATCH v2 1/2] irq: add irq_domain translation infrastructure   Ralf Baechle
• [RFC] Improving scalability of smp_mb__[before|after]_clear_bit   Russell King - ARM Linux
• [PATCH] ARM: get rid of a few StrongARM cache-related build time constants   Russell King - ARM Linux
• [PATCH] davinci: fix DM365 EVM video input mux bits   Russell King - ARM Linux
• [RFC] Improving scalability of smp_mb__[before|after]_clear_bit   Russell King - ARM Linux
• [PATCH v2] ARM: support XZ compressed kernels   Russell King - ARM Linux
• [PATCH v2] ARM: support XZ compressed kernels   Russell King - ARM Linux
• [PATCH v2] ARM: support XZ compressed kernels   Imre Kaloz
• linux-next regression on ARM926   Russell King - ARM Linux
• [PATCH 0/7] ARM: SAMSUNG: Code cleanup for various devices   Banajit Goswami
• [PATCH 1/7] ARM: SAMSUNG: Use generic s3c_set_platdata for TS   Banajit Goswami
• [PATCH 2/7] ARM: SAMSUNG: Use generic s3c_set_platdata for FB   Banajit Goswami
• [PATCH 3/7] ARM: SAMSUNG: Use generic s3c_set_platdata for HWMON   Banajit Goswami
• [PATCH 4/7] ARM: SAMSUNG: Use generic s3c_set_platdata for USB OHCI   Banajit Goswami
• [PATCH 5/7] ARM: SAMSUNG: Use generic s3c_set_platdata for NAND   Banajit Goswami
• [PATCH 6/7] ARM: S3C64XX: Use generic s3c_set_platdata for OneNAND   Banajit Goswami
• [PATCH 7/7] ARM: S3C24XX: Use generic s3c_set_platdata for devices   Banajit Goswami
• conflicts between omap/cleanup branch and omap_dss2 tree   Archit Taneja
• [PATCH] gpio/mxc/mxs: fix build error introduced by the reanming of irq_gc_ack()   Sergei Shtylyov
• [alsa-devel] [PATCH v3 00/10] ARM: mxs: add audio support   Dong Aisheng
• [RFC] Improving scalability of smp_mb__[before|after]_clear_bit   heechul Yun
• [PATCH] gpio/mxc/mxs: fix build error introduced by the reanming of irq_gc_ack()   Shawn Guo
• conflicts between omap/cleanup branch and omap_dss2 tree   Arnd Bergmann
• Git pull request: boot_params to atag_offset conversion   Nicolas Pitre
• [PATCH 0/3] SP805 updates for Versatile Express   Nick Bowler
• [PATCH v2] gpio/mxc/mxs: fix build error introduced by the irq_gc_ack() renaming   Shawn Guo
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Wolfram Sang
• [PATCH 3/7] ARM: mmp: support DT on both dkb and brownstone   Mitch Bradley
• [PATCH 1/1] ARM: mxs-dma: reset after disable channel   Koul, Vinod
• [GIT PULL v2] DaVinci fixes for v3.0   Arnd Bergmann
• [GIT PULL] arm-soc: last minute arm/davinci fixes for 3.0   Arnd Bergmann
• AT91 SDIO WiFi no working   Ludovic Desroches
• [GIT PULL] ARM: consolidate clkdev header files for v3.1   Arnd Bergmann
• [GIT PULL] arm-soc: last minute arm/davinci fixes for 3.0   Ben Dooks
• [PATCH v4 06/10] ARM: mxs: add saif device   Mark Brown
• Git pull request: boot_params to atag_offset conversion   Russell King - ARM Linux
• [PATCH] gpio/mxc/mxs: fix build error introduced by the reanming of irq_gc_ack()   Uwe Kleine-König
• [GIT PULL] arm-soc: last minute arm/davinci fixes for 3.0   Arnd Bergmann
• [PATCH v3 1/6] Samsung SoC ADC: use regulator (VDD for ADC).   Mark Brown
• [PATCH 08/17] mach-integrator: retire custom LED code   Linus Walleij
• [PATCH 1/1 V2] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Will Deacon
• [PATCH 0/7] Re-organize linker layouts   David Brown
• [PATCH 1/7] ARM: mmp: parse irq from DT   Grant Likely
• [PATCH 0/7] Re-organize linker layouts   Nicolas Pitre
• [PATCH] ARM: cns3xxx: Add support for L2 Cache Controller   Lin Mac
• [PATCH v2] gpio/mxc/mxs: fix build error introduced by the irq_gc_ack() renaming   Grant Likely
• [PATCH 2/7] ARM: mmp: append MMP_USE_OF config   Grant Likely
• plat-orion gpio regression for mixed level and edge sensitive IRQs   Joey Oravec
• S3C6410 UART resume problem   Tomasz Figa
• [PATCH 3/7] ARM: mmp: support DT on both dkb and brownstone   Grant Likely
• [PATCH 4/7] tty: serial: support device tree in pxa   Grant Likely
• [PATCH 6/7] i2c: pxa: support i2c controller from DT   Grant Likely
• [PATCH 7/7] i2c: pxa: support to parse property   Grant Likely
• [PATCH 7/7] i2c: pxa: support to parse property   Grant Likely
• [PATCH 4/7] tty: serial: support device tree in pxa   Arnd Bergmann
• [PATCH 3/7] ARM: mmp: support DT on both dkb and brownstone   Grant Likely
• [PATCH 4/7] tty: serial: support device tree in pxa   Grant Likely
• [PATCH 4/7] tty: serial: support device tree in pxa   Russell King - ARM Linux
• [PATCH 4/7] tty: serial: support device tree in pxa   Arnd Bergmann
• [PATCH 1/5] ARM: s3c64xx: PM: Mask and acknowledge all UART interrupts during core resume.   Tomasz Figa
• [PATCH 0/7] Re-organize linker layouts   David Brown
• [PATCH v2 0/3] Make fault injection available for MMC IO   Per Forlin
• [PATCH v2 1/3] fault-inject: make fault injection available for modules   Per Forlin
• [PATCH v2 2/3] mmc: core: add random fault injection   Per Forlin
• [PATCH v2 3/3] fault injection: add documentation on MMC IO fault injection   Per Forlin
• [PATCH 3/4] dt: omap3: add generic board file for dt support   Grant Likely
• [PATCH 3/4] dt: omap3: add generic board file for dt support   Grant Likely
• [PATCH 3/4] dt: omap3: add generic board file for dt support   Grant Likely
• [PATCH] arm/versatile: Add device tree support   Grant Likely
• [PATCH] arm/dt: tegra devicetree support   Grant Likely
• [PATCH v2 1/3] fault-inject: make fault injection available for modules   J Freyensee
• [PATCH 2/2] OMAP4: Kconfig: remove hotplug control for CPU0   Mike Turquette
• [PATCH] arm/dt: tegra devicetree support   Olof Johansson
• [PATCH v2 2/3] mmc: core: add random fault injection   J Freyensee
• [PATCH v3] ARM: EXYNOS4: Add platform device for dwmci driver.   Seungwon Jeon
• [PATCH 7/7] i2c: pxa: support to parse property   Eric Miao
• [PATCH 4/7] tty: serial: support device tree in pxa   Eric Miao
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Huang Shijie
• [alsa-devel] [PATCH v4 06/10] ARM: mxs: add saif device   Dong Aisheng
• [PATCH v5] Consolidate SRAM support   Jean-Christophe PLAGNIOL-VILLARD
• [alsa-devel] [PATCH v4 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Tabi Timur-B04825
• [PATCH v4 00/10] ARM: mxs: add audio support   Dong Aisheng
• [PATCH v4 01/10] ASoc: mxs: add mxs-pcm driver   Dong Aisheng
• [PATCH v4 02/10] ASoc: mxs: add mxs-saif driver   Dong Aisheng
• [PATCH v4 03/10] ASoc: mxs: add mxs-sgtl5000 machine driver   Dong Aisheng
• [PATCH v4 04/10] ASoc: mxs: add asoc configuration files   Dong Aisheng
• [PATCH v4 05/10] ARM: mxs: add saif clock   Dong Aisheng
• [PATCH v4 06/10] ARM: mxs: add saif device   Dong Aisheng
• [PATCH v4 07/10] ARM: mxs: add sgtl5000 i2c device   Dong Aisheng
• [PATCH v4 08/10] ARM: mxs: add mxs-sgtl5000 device   Dong Aisheng
• [PATCH v4 09/10] ARM: mxs: correct the using of frac div for saif   Dong Aisheng
• [PATCH v4 10/10] ARM: mxs-dma: include <linux/dmaengine.h>   Dong Aisheng
• [PATCH v2] USB: pxa168: Add onchip USB host controller support   Tanmay Upadhyay
• [PATCH v2] mtd: dataflash: add device tree probe support   Artem Bityutskiy
• [PATCH v3] mtd: dataflash: add device tree probe support   Artem Bityutskiy
• [PATCH V8 0/4] pxa3xx_nand: add two chip select support   Artem Bityutskiy
• [PATCH v2] mtd: dataflash: add device tree probe support   Shawn Guo
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Huang Shijie
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Artem Bityutskiy
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Artem Bityutskiy
• [PATCH v2] mtd: dataflash: add device tree probe support   Artem Bityutskiy
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Artem Bityutskiy
• [PATCH v2] mtd: dataflash: add device tree probe support   Shawn Guo
• [PATCH v2] mtd: dataflash: add device tree probe support   Artem Bityutskiy
• [PATCH v2] mtd: dataflash: add device tree probe support   Mike Frysinger
• [PATCH v2] mtd: dataflash: add device tree probe support   Shawn Guo
• [PATCH v2] mtd: dataflash: add device tree probe support   Artem Bityutskiy
• [PATCH V3 00/13] To use DMA generic APIs for Samsung DMA   Boojin Kim
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Lothar Waßmann
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Huang Shijie
• [PATCH v4 REPOST 13/20] gpio/omap: cleanup omap_gpio_mod_init function   DebBarma, Tarun Kanti
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Lothar Waßmann
• linux-next regression on ARM926   Dave Martin
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Artem Bityutskiy
• [i.MX28 GPMI] problem overwriting all-0xff data in NAND   Wolfram Sang
• [PATCHv12 0/8] Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 1/8] mm: move some functions from memory_hotplug.c to page_isolation.c   Marek Szyprowski
• [PATCH 2/8] mm: alloc_contig_freed_pages() added   Marek Szyprowski
• [PATCH 3/8] mm: alloc_contig_range() added   Marek Szyprowski
• [PATCH 4/8] mm: MIGRATE_CMA migration type added   Marek Szyprowski
• [PATCH 5/8] mm: MIGRATE_CMA isolation functions added   Marek Szyprowski
• [PATCH 6/8] drivers: add Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 7/8] ARM: integrate CMA with dma-mapping subsystem   Marek Szyprowski
• [PATCH 8/8] ARM: S5PV210: example of CMA private area for FIMC device on Goni board   Marek Szyprowski
• [PATCH v2 2/3] ARM: EXYNOS4: Add sclk_spdif clocks.   Naveen Krishna Ch
• [PATCH v4 REPOST 18/20] gpio/omap: use pm-runtime framework   DebBarma, Tarun Kanti
• [PATCH V4 00/13] To use DMA generic APIs for Samsung DMA   Boojin Kim
• [PATCH V4 01/13] DMA: PL330: Add support runtime PM for PL330 DMAC   Boojin Kim
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Boojin Kim
• [PATCH V4 03-2/13] DMA: PL330: Add DMA_CYCLIC capability   Boojin Kim
• [PATCH V4 05/13] ARM: SAMSUNG: Add common DMA operations   Boojin Kim
• [PATCH 0/7] ARM: mx28: add usb host function   Felipe Balbi
• [PATCH 1/7] consolidate definitions and structures to share among platforms   Felipe Balbi
• [PATCH 2/7] enable usb1 phy power supply   Felipe Balbi
• [PATCH 3/7] add usb phy clocks to clock tree   Felipe Balbi
• [PATCH 1/7] consolidate definitions and structures to share among platforms   Lin Tony-B19295
• [RFC PATCH 1/5] OMAP3:I2C: Add device tree nodes for beagle board   Shawn Guo
• [PATCH 3/7] add usb phy clocks to clock tree   Lin Tony-B19295
• [PATCH 5/7] ehci mxc: make it more flexible to be used for mx28   Arnaud Patard (Rtp)
• [PATCH 5/7] ehci mxc: make it more flexible to be used for mx28   Lin Tony-B19295
• [PATCH 0/7] ARM: mx28: add usb host function   Tony Lin
• [PATCH 1/7] consolidate definitions and structures to share among platforms   Tony Lin
• [PATCH 2/7] enable usb1 phy power supply   Tony Lin
• [PATCH 3/7] add usb phy clocks to clock tree   Tony Lin
• [PATCH 4/7] mx28: add usb host phy functions   Tony Lin
• [PATCH 5/7] ehci mxc: make it more flexible to be used for mx28   Tony Lin
• [PATCH 6/7] add macro definitions according to ehci-mxc driver change   Tony Lin
• [PATCH 7/7] add usb host function to default config   Tony Lin
• [PATCH 4/7] mx28: add usb host phy functions   Felipe Balbi
• [PATCH 5/7] ehci mxc: make it more flexible to be used for mx28   Felipe Balbi
• [PATCH 1/7] consolidate definitions and structures to share among platforms   Felipe Balbi
• [PATCH 5/7] ehci mxc: make it more flexible to be used for mx28   Lin Tony-B19295
• [PATCH 1/7] consolidate definitions and structures to share among platforms   Lin Tony-B19295
• [PATCH 5/7] ehci mxc: make it more flexible to be used for mx28   Felipe Balbi
• [PATCH 5/7] ehci mxc: make it more flexible to be used for mx28   Lin Tony-B19295
• [PATCH 5/7] ehci mxc: make it more flexible to be used for mx28   Felipe Balbi
• [PATCH 2/7] enable usb1 phy power supply   Wolfram Sang
• [PATCH 5/7] ehci mxc: make it more flexible to be used for mx28   Wolfram Sang
• [PATCH v3 0/6] Update Samsung-SoC ADC to support recent CPUs   Kukjin Kim
• [PATCH v3 1/6] Samsung SoC ADC: use regulator (VDD for ADC).   Kukjin Kim
• [PATCH] arm/mxc: add the missing UART_PADDR for i.mx53   Wolfram Sang
• [PATCH] arm/mxc: add the missing UART_PADDR for i.mx53   Shawn Guo
• [PATCH] arm/mxc: add the missing UART_PADDR for i.mx53   Shawn Guo
• [PATCH] arm/mxc: add the missing UART_PADDR for i.mx53   Wolfram Sang
• [PATCH 0/3] ARM: SAMSUNG: Cleanup mach/regs-fb.h from various machines   Ajay Kumar
• [PATCH 1/3] ARM: S5PC100: Cleanup mach/regs-fb.h from mach-s5pc100   Ajay Kumar
• [PATCH 2/3] ARM: S5PV210: Cleanup mach/regs-fb.h from mach-s5pv210   Ajay Kumar
• [PATCH 3/3] ARM: S3C64XX: Cleanup mach/regs-fb.h from mach-s3c64xx   Ajay Kumar
• [PATCH 0/8] ARM: SAMSUNG: Add common PWM Backlight support   Kukjin Kim
• [PATCH] arm/mxc: add the missing UART_PADDR for i.mx53   Shawn Guo
• [PATCH] arm/mxc: add the missing UART_PADDR for i.mx53   Shawn Guo
• [PATCH] arm/mxc: add the missing UART_PADDR for i.mx53   Wolfram Sang
• [PATCH 5/7] ehci mxc: make it more flexible to be used for mx28   Alan Stern
• [PATCH] arm/mxc: add the missing UART_PADDR for i.mx53   Shawn Guo
• [PATCH] arm/dt: tegra devicetree support   Stephen Warren
• [PATCH v3 0/6] ARM: EXYNOS4: NURI Board Configuration Update   Kukjin Kim
• [PATCH v3] ARM: EXYNOS4: Add platform device for dwmci driver.   Kukjin Kim
• [PATCH] arm/dt: tegra devicetree support   Mark Brown
• [PATCH V4 00/13] To use DMA generic APIs for Samsung DMA   Kukjin Kim
• [PATCH v4 01/10] ASoc: mxs: add mxs-pcm driver   Liam Girdwood
• [PATCH v4 02/10] ASoc: mxs: add mxs-saif driver   Liam Girdwood
• [PATCH] ARM: S3C64XX: Configure backup battery charger on Cragganmore   Mark Brown
• [PATCH] ARM: S3C64XX: Configure backup battery charger on Cragganmore   Kukjin Kim
• [PATCH] davinci: fix DM365 EVM video input mux bits   Nori, Sekhar
• [alsa-devel] [PATCH v4 02/10] ASoc: mxs: add mxs-saif driver   Dong Aisheng
• [PATCH] davinci: fix DM365 EVM video input mux bits   Russell King - ARM Linux
• [alsa-devel] [PATCH v4 01/10] ASoc: mxs: add mxs-pcm driver   Dong Aisheng
• [PATCH v3 2/6] Exynos4 NURI: configure regulators and PMIC (MAX8997)   Kukjin Kim
• [PATCH v3 1/6] ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs   Kukjin Kim
• [PATCH 0/7] ARM: SAMSUNG: Code cleanup for various devices   Kukjin Kim
• [PATCH 0/3] ARM: SAMSUNG: Cleanup mach/regs-fb.h from various machines   Kukjin Kim
• [PATCH] ARM: S5P64X0: External Interrupt Support   Kukjin Kim
• S3C6410 UART resume problem   Tomasz Figa
• [PATCH] arm/dt: tegra devicetree support   Grant Likely
• [PATCH v2 2/2] ARM: EXYNOS4: Add more registers to be saved and restored for PM   Kukjin Kim
• [PATCH] arm/dt: tegra devicetree support   Grant Likely
• [PATCH] arm/dt: tegra devicetree support   Stephen Warren
• [PATCH V4 01/13] DMA: PL330: Add support runtime PM for PL330 DMAC   Jassi Brar
• [PATCH] arm/dt: tegra devicetree support   Stephen Warren
• [PATCH] arm/dt: tegra devicetree support   Grant Likely
• [PATCH] arm/dt: tegra devicetree support   Grant Likely
• [RFC PATCH 1/5] OMAP3:I2C: Add device tree nodes for beagle board   Grant Likely
• [PATCH] arm/dt: tegra devicetree support   Grant Likely
• [PATCH 2/7] enable usb1 phy power supply   Sascha Hauer
• [PATCH 3/7] add usb phy clocks to clock tree   Sascha Hauer
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Jassi Brar
• [PATCH 4/7] mx28: add usb host phy functions   Sascha Hauer
• [PATCH 5/7] ehci mxc: make it more flexible to be used for mx28   Sascha Hauer
• [PATCH 6/7] add macro definitions according to ehci-mxc driver change   Sascha Hauer
• [PATCH] arm/dt: tegra devicetree support   Mark Brown
• [PATCH 0/7] ARM: mx28: add usb host function   Sascha Hauer
• [PATCH] arm/mxc: add the missing UART_PADDR for i.mx53   Troy Kisky
• [GIT PULL] MSM fix   David Brown
• [PATCH] arm/mxc: add the missing UART_PADDR for i.mx53   Wolfram Sang
• [GIT PULL] MSM fix   Arnd Bergmann
• [PATCH] arm/mxc: add the missing UART_PADDR for i.mx53   Troy Kisky
• [PATCH v2 2/3] mmc: core: add random fault injection   Per Forlin
• [PATCH v2 1/3] fault-inject: make fault injection available for modules   Per Forlin
• [PATCH v3 0/3] Make fault injection available for MMC IO   Per Forlin
• [PATCH v3 1/3] fault-inject: make fault injection available for modules   Per Forlin
• [PATCH v3 2/3] mmc: core: add random fault injection   Per Forlin
• [PATCH v3 3/3] fault injection: add documentation on MMC IO fault injection   Per Forlin
• [RFC PATCH 1/5] OMAP3:I2C: Add device tree nodes for beagle board   Shawn Guo
• [PATCH] arm/dt: tegra devicetree support   Shawn Guo
• [GIT PULL] MSM fix   David Brown
• [GIT PULL] MSM fix   Russell King - ARM Linux
• [PATCH] arm/mxc: add the missing UART_PADDR for i.mx53   Shawn Guo
• [RFC PATCH 1/5] OMAP3:I2C: Add device tree nodes for beagle board   Grant Likely
• [PATCH] arm/mxc: add the missing UART_PADDR for i.mx53   Shawn Guo
• [PATCH] ARM: Migrate to asm-generic wrapper support   Stephen Boyd
• [PATCH] ARM: Migrate to asm-generic wrapper support   Russell King - ARM Linux
• [PATCH] ARM: do not mark CPU 0 as hotpluggable   Mike Turquette
• [PATCH] ARM: Migrate to asm-generic wrapper support   Stephen Boyd
• [GIT PULL] MSM fix   David Brown
• plat-orion gpio regression for mixed level and edge sensitive IRQs   Simon Guinot
• dynamic VMALLOC_END, was Re: [PATCH 1/3] ARM: CSR: Adding CSR SiRFprimaII board support   Nicolas Pitre
• [PATCH] arm/mxc: add the missing UART_PADDR for i.mx53   Troy Kisky
• [PATCH 2/6] ARM: S5P64X0: Add register base and IRQ for Framebuffer   Kukjin Kim
• [PATCH 4/6] ARM: S5P64X0: Add GPIO and SPCON settings for LCD   Kukjin Kim
• [PATCH 6/6] ARM: S5P6450: Add LCD-LTE480 and enable Framebuffer support   Kukjin Kim
• [PATCH 0/3] ARM: Add SDMMC support for S5P64X0   Kukjin Kim
• [PATCH] ARM: EXYNOS4: Add more register addresses of CMU.   MyungJoo Ham
• [PATCH v3 1/6] ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs   MyungJoo Ham
• [PATCH] sdio add regulator vsdio to dynamic control sdio power   Zhangfei Gao
• [PATCH] mmc: sdio add regulator vsdio   Zhangfei Gao
• [PATCH] ARM: mmp2: support sdio with regulator vsdio   Zhangfei Gao
• [PATCH] ARM: EXYNOS4: Add more register addresses of CMU.   Kukjin Kim
• [PATCH] ARM: do not mark CPU 0 as hotpluggable   Rob Herring
• [PATCH V2] ARM: EXYNOS4: Add support for ORIGEN board   Tushar Behera
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Boojin Kim
• [PATCH v5 0/4] ASoC: mxs: add audio support   Dong Aisheng-B29396
• [PATCH v5 0/4] ASoC: mxs: add audio support   Dong Aisheng
• [PATCH v5 1/4] ASoC: mxs: add mxs-pcm driver   Dong Aisheng
• [PATCH v5 2/4] ASoC: mxs: add mxs-saif driver   Dong Aisheng
• [PATCH v5 3/4] ASoC: mxs: add mxs-sgtl5000 machine driver   Dong Aisheng
• [PATCH v5 4/4] ASoC: mxs: add asoc configuration files   Dong Aisheng
• [PATCH V2] ARM: EXYNOS4: Add support for ORIGEN board   Tushar Behera
• [PATCHV2] OMAP4: OPP: add OMAP4460 definitions   Vishwanath BS
• [PATCHV2] OMAP4: OPP: add OMAP4460 definitions   Vishwanath Sripathy
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Jassi Brar
•   Tushar Behera
• [PATCH] ARM: do not mark CPU 0 as hotpluggable   Santosh Shilimkar
• [PATCH 0/3] ARM: Add SDMMC support for S5P64X0   Rajeshwari Birje
• [PATCH v3 1/6] ARM: EXYNOS4: Increase NR_IRQS for devices with more IRQs   MyungJoo Ham
•   padma venkat
• [PATCH 4/7] mx28: add usb host phy functions   Lothar Waßmann
• [PATCH 6/7] add macro definitions according to ehci-mxc driver change   Lothar Waßmann
• [PATCH] ARM: EXYNOS4: Add missing S3C_VA_UARTx   jhbird.choi at samsung.com
•   Tushar Behera
• [PATCH] mtd: s3c2410 nand: Remove uncessary null check   jhbird.choi at samsung.com
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Boojin Kim
• [PATCH v5 0/4] ASoC: mxs: add audio support   Wolfram Sang
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH v8 1/3] MTD : add the common code for GPMI-NAND controller driver   Huang Shijie
• [PATCH v8 2/3] MTD : add helper functions library and header files for GPMI NAND driver   Huang Shijie
• [PATCH v8 3/3] MTD : add GPMI-NAND driver in the config and Makefile   Huang Shijie
• [PATCH 0/5] I2C: driver updates   Shubhrajyoti D
• [PATCH 1/5] OMAP: I2C: Add a device reset field to platform data   Shubhrajyoti D
• [PATCH 2/5] OMAP: I2C: Reset support   Shubhrajyoti D
• [PATCH 3/5] OMAP: I2C: Remove the reset in the init path   Shubhrajyoti D
• [PATCH 4/5] OMAP: I2C: Remove the SYSC register definition   Shubhrajyoti D
• [PATCH 5/5] OMAP: I2C: Restore only if context is lost   Shubhrajyoti D
• [PATCH] mtd: s3c2410 nand: Remove uncessary null check   Varun Wadekar
• [PATCH v5 0/4] ASoC: mxs: add audio support   Dong Aisheng-B29396
• [PATCH v2] ARM: Tegra: Trimslice: Tri-state DAP3 pinmux   Mike Rapoport
• [PATCH 3/4] dt: omap3: add generic board file for dt support   Tony Lindgren
• conflicts between omap/cleanup branch and omap_dss2 tree   Tomi Valkeinen
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Jassi Brar
• [PATCH] ARM: do not mark CPU 0 as hotpluggable   Russell King - ARM Linux
• [PATCH V2] ARM: EXYNOS4: Add support for ORIGEN board   Kukjin Kim
• [PATCH][RESEND] ARM: S5P64X0: External Interrupt Support   Kukjin Kim
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Russell King - ARM Linux
• [PATCH 5/5] OMAP: I2C: Restore only if context is lost   T Krishnamoorthy, Balaji
• [PATCH 3/5] OMAP: I2C: Remove the reset in the init path   T Krishnamoorthy, Balaji
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Santosh Shilimkar
• [PATCH 3/4] dt: omap3: add generic board file for dt support   Rajendra Nayak
• [PATCHv12 0/8] Contiguous Memory Allocator   Marek Szyprowski
• [PATCH 3/4] dt: omap3: add generic board file for dt support   Felipe Balbi
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Jassi Brar
• [PATCH v2] ARM: Tegra: Trimslice: Tri-state DAP3 pinmux   Mike Rapoport
• [PATCH 3/4] dt: omap3: add generic board file for dt support   Rajendra Nayak
• [PATCH 3/4] dt: omap3: add generic board file for dt support   Felipe Balbi
• [GIT PULL] Samsung S5P for v3.1 merge window   Kukjin Kim
• [PATCH] ARM: S5P64X0: External Interrupt Support   Padmavathi Venna
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Linus Walleij
• [PATCH 3/4] dt: omap3: add generic board file for dt support   G, Manjunath Kondaiah
• [PATCH] ARM: EXYNOS4: Update config file of NURI to enable RTC   Chanwoo Choi
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Lorenzo Pieralisi
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Santosh Shilimkar
• [PATCHV2 0/5] I2C: driver updates   Shubhrajyoti D
• [PATCHV2 1/5] OMAP: I2C: Add a device reset field to platform data   Shubhrajyoti D
• [PATCHV2 2/5] OMAP: I2C: Reset support   Shubhrajyoti D
• [PATCHV2 3/5] OMAP: I2C: Remove the reset in the init path   Shubhrajyoti D
• [PATCHV2 4/5] OMAP: I2C: Remove the SYSC register definition   Shubhrajyoti D
• [PATCHV2 5/5] OMAP: I2C: Restore only if context is lost   Shubhrajyoti D
• No subject   Padmavathi Venna
• [PATCHV2 1/5] OMAP: I2C: Add a device reset field to platform data   Santosh Shilimkar
• [PATCHV2 2/5] OMAP: I2C: Reset support   Santosh Shilimkar
• [PATCH][RESEND] ARM: S5P64X0: External Interrupt Support   Padmavathi Venna
• [PATCHV2 3/5] OMAP: I2C: Remove the reset in the init path   Santosh Shilimkar
• [PATCHV2 4/5] OMAP: I2C: Remove the SYSC register definition   Santosh Shilimkar
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Russell King - ARM Linux
• [PATCHV2 5/5] OMAP: I2C: Restore only if context is lost   Santosh Shilimkar
• [PATCHV2 2/5] OMAP: I2C: Reset support   Shubhrajyoti
• [PATCH 3/5] ARM: s3c64xx: Save/restore S3C64XX_SDMA_SEL on suspend/resume.   Tomasz Figa
• [PATCH 2/4 v2] ARM: s3c64xx: Save/restore S3C64XX_SDMA_SEL on suspend/resume.   Tomasz Figa
• [PATCH 4/5] ARM: s3c64xx: Save/restore S3C64XX_MODEM_MIFPCON on suspend/resume to preserve LCD bypass state.   Tomasz Figa
• [PATCH 3/4 v2] ARM: s3c64xx: Save/restore S3C64XX_MODEM_MIFPCON on suspend/resume to preserve LCD bypass state.   Tomasz Figa
• [PATCH] ARM: do not mark CPU 0 as hotpluggable   Russell King - ARM Linux
• linux-next regression on ARM926   Russell King - ARM Linux
• [PATCHV3 0/4] The series attempts to do the following   Shubhrajyoti D
• [PATCHV3 1/4] OMAP: I2C: Reset support   Shubhrajyoti D
• [PATCHV3 2/4] OMAP: I2C: Remove the reset in the init path   Shubhrajyoti D
• [PATCHV3 3/4] OMAP: I2C: Remove the SYSC register definition   Shubhrajyoti D
• [PATCHV3 4/4] OMAP: I2C: I2C register restore only if context is lost   Shubhrajyoti D
• [PATCHV3 2/4] OMAP: I2C: Remove the reset in the init path   Felipe Balbi
• conflicts between omap/cleanup branch and omap_dss2 tree   Arnd Bergmann
• [PATCH] usb/ehci-mxc: add missing inclusion of mach/hardware.h   Shawn Guo
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Jassi Brar
• [PATCH v4 0/6] mc13783: add pwr button support   Uwe Kleine-König
• [GIT PULL] MSM fix   Arnd Bergmann
• [GIT PULL] Samsung S5P for v3.1 merge window   Arnd Bergmann
• [PATCH v4 0/6] mc13783: add pwr button support   Philippe Rétornaz
• [PATCH 1/6] mc13783: add power button support   Philippe Rétornaz
• [PATCH 2/6] mx31moboard: Add MC13783 power button support   Philippe Rétornaz
• [PATCH 3/6] mc13xxx: Unconditionally register regulator subdevice   Philippe Rétornaz
• [PATCH 4/6] mc13xxx: implicitly register led subdevice   Philippe Rétornaz
• [PATCH 5/6] mc13xxx: remove obsolete leds and regualtors flags   Philippe Rétornaz
• [PATCH 6/6] mc13xxx: remove unused define   Philippe Rétornaz
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Jassi Brar
• [PATCH 0/4] Fix CPU hotplug IRQ migration   Russell King - ARM Linux
• [PATCHV4 0/4] I2C: driver updates   Shubhrajyoti D
• [PATCHV4 1/4] OMAP: I2C: Reset support   Shubhrajyoti D
• [PATCHV4 2/4] OMAP: I2C: Remove the reset in the init path   Shubhrajyoti D
• [PATCHV4 3/4] OMAP: I2C: Remove the SYSC register definition   Shubhrajyoti D
• [PATCHV4 4/4] OMAP: I2C: I2C register restore only if context is lost   Shubhrajyoti D
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Russell King - ARM Linux
• [PATCH 1/4] ARM: CPU hotplug: fix abuse of irqdesc->node   Russell King - ARM Linux
• [PATCH 2/4] ARM: GIC: avoid routing interrupts to offline CPUs   Russell King - ARM Linux
• [PATCHV3 2/4] OMAP: I2C: Remove the reset in the init path   Shubhrajyoti
• [PATCH 3/4] ARM: CPU hotplug: pass in proper affinity mask on IRQ migration   Russell King - ARM Linux
• [PATCH 4/4] ARM: CPU hotplug: ensure we migrate all IRQs off a downed CPU   Russell King - ARM Linux
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Russell King - ARM Linux
• [PATCHV3 2/4] OMAP: I2C: Remove the reset in the init path   Kevin Hilman
• [PATCHV3 0/4] The series attempts to do the following   Kevin Hilman
• [PATCH v2] ARM: Tegra: Trimslice: Tri-state DAP3 pinmux   Stephen Warren
• [PATCH 1/2] ARM: Tegra: Seaboard board updates for audio   Stephen Warren
• [GIT PULL] MSM fix   Russell King - ARM Linux
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Jassi Brar
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Russell King - ARM Linux
• [PATCH 0/9] PL08x further cleanups   Russell King - ARM Linux
• [PATCH] iMX28: Fix emi_ddr_open pinmux   Marek Vasut
• [PATCH 1/9] DMA: PL08x: remove unused constants   Russell King - ARM Linux
• [PATCH 2/9] DMA: PL08x: select LLI bus only once per LLI setup   Russell King - ARM Linux
• [PATCH 3/9] DMA: PL08x: clean up LLI debugging   Russell King - ARM Linux
• [PATCH 4/9] DMA: PL08x: separately store source/destination slave address   Russell King - ARM Linux
• [PATCH 5/9] DMA: PL08x: separately store source/destination cctl   Russell King - ARM Linux
• [PATCH 6/9] DMA: PL08x: constify plchan->cd and plat->slave_channels   Russell King - ARM Linux
• [PATCH 7/9] DMA: PL08x: cleanup selection of buswidth   Russell King - ARM Linux
• [PATCH 8/9] DMA: PL08x: avoid recalculating cctl at each prepare   Russell King - ARM Linux
• [PATCH 9/9] DMA: PL08x: cleanup selection of burst size   Russell King - ARM Linux
• linux-next regression on ARM926   Dave Martin
• [PATCH] ARM: add highmem.h to lib/uaccess_with_memcpy.c   Paul Gortmaker
• linux-next regression on ARM926   Russell King - ARM Linux
• [RFC PATCH v9 0/4] Consolidating GIC per-cpu interrupts   Marc Zyngier
• [RFC PATCH v9 1/4] ARM: gic: consolidate PPI handling   Marc Zyngier
• [RFC PATCH v9 2/4] ARM: gic: Add PPI registration interface   Marc Zyngier
• [RFC PATCH v9 3/4] ARM: local timers: drop local_timer_ack()   Marc Zyngier
• [RFC PATCH v9 4/4] ARM: gic: add compute_irqnr macro for exynos4   Marc Zyngier
• linux-next regression on ARM926   Dave Martin
• [PATCH] mtd: s3c2410 nand: Remove uncessary null check   Russell King - ARM Linux
• [PATCH] freshen up mm/proc-arm946.S   Dave Martin
• [PATCH] OMAP: omap_device: replace pr_* prints with dev_*   Kevin Hilman
• [PATCH] OMAP: omap_device: replace pr_* prints with dev_*   Felipe Balbi
• linux-next regression on ARM926   Linus Walleij
• linux-next regression on ARM926   Russell King - ARM Linux
• [PATCH v5 0/6] mc13783: add pwr button support   Philippe Rétornaz
• [PATCH 1/6] mc13xxx: Unconditionally register regulator subdevice   Philippe Rétornaz
• [PATCH 2/6] mc13xxx: implicitly register led subdevice   Philippe Rétornaz
• [PATCH 3/6] mc13xxx: remove obsolete leds and regualtors flags   Philippe Rétornaz
• [PATCH 4/6] mc13xxx: remove unused define   Philippe Rétornaz
• [PATCH 5/6] mc13783: add power button support   Philippe Rétornaz
• [PATCH 6/6] mx31moboard: Add MC13783 power button support   Philippe Rétornaz
• [PATCH] ARM: Migrate to asm-generic wrapper support   Stephen Boyd
• [PATCH 1/2] ARM: Tegra: Seaboard board updates for audio   Colin Cross
• [PATCH] OMAP: omap_device: replace pr_* prints with dev_*   Kevin Hilman
• [PATCH 2/2] MTD: pxa3xx_nand: Fix blank page ECC mismatch   Brian Norris
• [PATCH] iMX28: Fix emi_ddr_open pinmux   Uwe Kleine-König
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Colin Cross
• [PATCH] ARM: Migrate to asm-generic wrapper support   Krzysztof Halasa
• [PATCH] iMX28: Fix emi_ddr_open pinmux   Marek Vasut
• [PATCH 1/2] ARM: Tegra: Seaboard board updates for audio   Stephen Warren
• [PATCH 1/2] ARM: Tegra: Seaboard board updates for audio   Olof Johansson
• [RFC/PATCH 3/7] OMAP: McBSP: use existing macros for converting between devices   Kevin Hilman
• [PATCH] ARM: do not mark CPU 0 as hotpluggable   Woodruff, Richard
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Wolfram Sang
• [PATCH] ARM: do not mark CPU 0 as hotpluggable   Turquette, Mike
• [RFC/PATCH 0/7] decouple platform_device from omap_device   Kevin Hilman
• [PATCH] OMAP: omap_device: replace _find_by_pdev() with to_omap_device()   Kevin Hilman
• [RFC/PATCH 1/7] OMAP: omap_device: replace debug/warning/error prints with dev_* macros   Kevin Hilman
• [RFC/PATCH 2/7] OMAP3: beagle: don't touch omap_device internals   Kevin Hilman
• [RFC/PATCH 3/7] OMAP: McBSP: use existing macros for converting between devices   Kevin Hilman
• [RFC/PATCH 4/7] OMAP: omap_device: remove internal functions from omap_device.h   Kevin Hilman
• [RFC/PATCH 5/7] OMAP: omap_device: when building return platform_device instead of omap_device   Kevin Hilman
• [RFC/PATCH 6/7] OMAP: omap_device: device register functions now take platform_device pointer   Kevin Hilman
• [RFC/PATCH 7/7] WIP: HACK/RFC: omap_device: begin to decouple platform_device from omap_device   Kevin Hilman
• [PATCH 3/4] dt: omap3: add generic board file for dt support   Kevin Hilman
• ARM: mmp2: support sdio with regulator vsdio   Philip Rakity
• [RFC PATCH v9 2/4] ARM: gic: Add PPI registration interface   Jeff Ohlstein
• Booting kernel on Android phone with perf-events enabled.   Arun Bharadwaj
• [PATCH] genirq: move mask_cache into struct irq_chip_type   Simon Guinot
• [PATCH 5/6] mc13783: add power button support   Wanlong Gao
• [PATCH 1/6] mc13783: add power button support   Shawn Guo
• [PATCH RESEND v3 0/2] Add device tree probe support for tty/serial/imx   Shawn Guo
• [PATCH] net/fec: gasket needs to be enabled for some i.mx   Shawn Guo
• [PATCH v2 0/3] Add device tree probe support for imx fec driver   Shawn Guo
• [PATCH 0/2] Add device tree probe for i2c-imx driver   Shawn Guo
• [PATCH 2/7] enable usb1 phy power supply   Lin Tony-B19295
• [RFC/PATCH 7/7] WIP: HACK/RFC: omap_device: begin to decouple platform_device from omap_device   Grant Likely
• [PATCH 2/7] enable usb1 phy power supply   Lin Tony-B19295
• [PATCH 4/7] mx28: add usb host phy functions   Lin Tony-B19295
• [PATCH v2 0/3] Add device tree probe support for imx fec driver   David Miller
• mmc: sdio add regulator vsdio   zhangfei gao
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH v2 0/3] Add device tree probe for imx-sdma driver   Shawn Guo
• [PATCH] ARM: do not mark CPU 0 as hotpluggable   Santosh Shilimkar
• [PATCH 5/6] mc13783: add power button support   Dmitry Torokhov
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Santosh Shilimkar
• [PATCH 5/7] ehci mxc: make it more flexible to be used for mx28   Lin Tony-B19295
• [PATCH 03/17] ARM: gic: Use cpu pm notifiers to save gic state   Colin Cross
• [PATCH 0/4] Fix CPU hotplug IRQ migration   Santosh Shilimkar
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Jassi Brar
• [PATCH 0/2] OMAP3+: PM: SR fixes   Nishanth Menon
• [PATCH 1/2] OMAP3+: PM: SR: use put_sync_suspend for disabling   Nishanth Menon
• [PATCH 2/2] OMAP2+: PM: SR: add suspend/resume handlers   Nishanth Menon
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Shawn Guo
• [PATCH 3/7] add usb phy clocks to clock tree   Lin Tony-B19295
• [RFC/PATCH 6/7] OMAP: omap_device: device register functions now take platform_device pointer   Grant Likely
• [PATCH] mmc: sdio add regulator vsdio   Daniel Drake
• Offline for next few weeks   Tony Lindgren
• [PATCH] mmc: sdio add regulator vsdio   zhangfei gao
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [PATCH 0/4] Fix CPU hotplug IRQ migration   Russell King - ARM Linux
• linux-next regression on ARM926   Dave Martin
• [PATCH 0/4] Fix CPU hotplug IRQ migration   Santosh Shilimkar
• [PATCH] mtd: s3c2410 nand: Remove uncessary null check   Artem Bityutskiy
• [PATCH 2/2] MTD: pxa3xx_nand: Fix blank page ECC mismatch   Artem Bityutskiy
• [PATCH 0/4] Fix CPU hotplug IRQ migration   Will Deacon
• [PATCH] OMAP: omap_device: replace _find_by_pdev() with to_omap_device()   Felipe Balbi
• [RFC/PATCH 2/7] OMAP3: beagle: don't touch omap_device internals   Felipe Balbi
• [RFC/PATCH 3/7] OMAP: McBSP: use existing macros for converting between devices   Felipe Balbi
• [PATCH 2/2] OMAP2+: PM: SR: add suspend/resume handlers   Felipe Balbi
• [PATCH v2] ARM: support XZ compressed kernels   Russell King - ARM Linux
• [PATCH 3/7] add usb phy clocks to clock tree   Sascha Hauer
• [RFC PATCH v9 2/4] ARM: gic: Add PPI registration interface   Marc Zyngier
• [PATCH 2/2] MTD: pxa3xx_nand: Fix blank page ECC mismatch   Artem Bityutskiy
• [RFC PATCH v9 1/4] ARM: gic: consolidate PPI handling   Russell King - ARM Linux
• [PATCH v2] ARM: support XZ compressed kernels   Imre Kaloz
• [PATCH v2] ARM: support XZ compressed kernels   Russell King - ARM Linux
• [RFC PATCH v9 1/4] ARM: gic: consolidate PPI handling   Marc Zyngier
• [PATCH v2] ARM: support XZ compressed kernels   Imre Kaloz
• [patch 0/3] imx: Efika: Add pata device   Arnaud Patard (Rtp)
• [patch 1/3] imx51: add pata device   Arnaud Patard (Rtp)
• [patch 2/3] imx51: add pata clock   Arnaud Patard (Rtp)
• [patch 3/3] imx: efika: Enable pata.   Arnaud Patard (Rtp)
• [PATCH] Fix logic of tx_empty.   Simon Budig
• [PATCH V4 00/13] To use DMA generic APIs for Samsung DMA   Koul, Vinod
• [RFC/PATCH 3/7] OMAP: McBSP: use existing macros for converting between devices   Sergei Shtylyov
• [PATCH 3.0] fix compile warnings in plat-iop/cp6.c   Mikael Pettersson
• [PATCH] ARM: do not mark CPU 0 as hotpluggable   Woodruff, Richard
• Patch: Fix for wrong logic in tx_empty for serial/amba-pl011.c   Simon Budig
• [PATCH v2] ARM: support XZ compressed kernels   Russell King - ARM Linux
• [PATCH] ARM: do not mark CPU 0 as hotpluggable   Santosh Shilimkar
• [PATCH] OMAP: omap_device: replace pr_* prints with dev_*   Grazvydas Ignotas
• [PATCH 5/6] mc13783: add power button support   Philippe Rétornaz
• [PATCH 3.0] fix compile warnings in plat-iop/cp6.c   Russell King - ARM Linux
• at91sam9g45: Issues while working with RAM that is separated on physical address space   P J
• linux-next regression on ARM926   Linus Walleij
• [PATCH 2/2] OMAP2+: PM: SR: add suspend/resume handlers   Menon, Nishanth
• at91sam9g45: Issues while working with RAM that is separated on physical address space   Russell King - ARM Linux
• linux-next regression on ARM926   Russell King - ARM Linux
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Linus Walleij
• [PATCH v6 0/6] mc13783: add pwr button support   Philippe Rétornaz
• [PATCH 1/6] mc13xxx: Unconditionally register regulator subdevice   Philippe Rétornaz
• [PATCH 2/6] mc13xxx: implicitly register led subdevice   Philippe Rétornaz
• [PATCH 3/6] mc13xxx: remove obsolete leds and regulators flags   Philippe Rétornaz
• [PATCH 4/6] mc13xxx: remove unused define   Philippe Rétornaz
• [PATCH 5/6] mc13783: add power button support   Philippe Rétornaz
• [PATCH 6/6] mx31moboard: Add MC13783 power button support   Philippe Rétornaz
• [PATCH 3.0] fix compile warnings in plat-iop/cp6.c   Mikael Pettersson
• [PATCH 3.0] fix compile warnings in plat-iop/cp6.c   Russell King - ARM Linux
• [patch 1/3] imx51: add pata device   Fabio Estevam
• [PATCH 4/6] ARM: pci: make pcibios_assign_all_busses use pci_has_flag   Jesse Barnes
• [PATCH 3.0] fix compile warnings in plat-iop/cp6.c   Mikael Pettersson
• [PATCH] mmc: sdio add regulator vsdio   Philip Rakity
• [PATCH] ARM: Migrate to asm-generic wrapper support   Krzysztof Halasa
• [PATCH 0/4] Fix CPU hotplug IRQ migration   Colin Cross
• [PATCH, RFC] fix UP futex code to not generate invalid streqt instruction   Mikael Pettersson
• [RFC 0/6] watchdog drivers converted to the new framework   Wim Van Sebroeck
• [PATCH, RFC] fix UP futex code to not generate invalid streqt instruction   Dave Martin
• [PATCH, RFC] fix UP futex code to not generate invalid streqt instruction   Russell King - ARM Linux
• [PATCH, RFC] fix UP futex code to not generate invalid streqt instruction   Russell King - ARM Linux
• [PATCH 7/7] at91sam9/wdt: move register header to drivers   Wim Van Sebroeck
• [PATCH 0/3] SP805 updates for Versatile Express   Wim Van Sebroeck
• [PATCH] watchdog: imx2_wdt: add device tree probe support   Wim Van Sebroeck
• [PATCH 0/3] SP805 updates for Versatile Express   Nick Bowler
• [patch 1/3] imx51: add pata device   Uwe Kleine-König
• [patch 1/3] imx51: add pata device   Uwe Kleine-König
• [PATCH 1/2] of: address: use resource_size helper   Felipe Balbi
• [PATCH 2/2] arm: omap: mark dt_compat __initconst   Felipe Balbi
• [PATCH] OMAP: omap_device: replace pr_* prints with dev_*   Kevin Hilman
• [PATCH v2] ARM: support XZ compressed kernels   Imre Kaloz
• [PATCH v2] ARM: support XZ compressed kernels   Russell King - ARM Linux
• [PATCH 2/2] OMAP2+: PM: SR: add suspend/resume handlers   Kevin Hilman
• [PATCH 1/2] OMAP3+: PM: SR: use put_sync_suspend for disabling   Kevin Hilman
• [RFC/PATCH 3/7] OMAP: McBSP: use existing macros for converting between devices   Kevin Hilman
• [PATCH, RFC] fix UP futex code to not generate invalid streqt instruction   Mikael Pettersson
• [patch 1/3] imx51: add pata device   Arnaud Patard (Rtp)
• [PATCH 2/3] ARM: tegra: paz00: export the WIFI rfkill gpio   Marc Dietrich
• [patch 1/3] imx51: add pata device   Uwe Kleine-König
• [RFC/PATCH] PM / Runtime: allow _put_sync() from interrupts-disabled context   Kevin Hilman
• [RFC/PATCH v2] PM / Runtime: allow _put_sync() from interrupts-disabled context   Kevin Hilman
• [PATCH] arm: Call do_notify_resume() with interrupts enabled   Thomas Gleixner
• [RFC] DMAEngine: Define generic transfer request api   Jassi Brar
• [PATCH] dmaengine: add dma_ctrl_cmd to pass buffer stride configuration   Jassi Brar
• [linux-pm] [RFC/PATCH v2] PM / Runtime: allow _put_sync() from interrupts-disabled context   Rafael J. Wysocki
• [PATCH] ARM:mach-dove:remove the dup include serial_8250.h   Wanlong Gao
• [PATCH] ARM:mach-s3c2410:remove the dup include file leds.h   Wanlong Gao
• [PATCH v6 0/6] mc13783: add pwr button support   Shawn Guo
• [PATCH] ARM:mach-dove:remove the dup include serial_8250.h   Jesper Juhl
• [PATCH] ARM:mach-dove:remove the dup include serial_8250.h   Wanlong Gao
• [PATCH 2/2 V2] OMAP3+: PM: SR: add suspend/resume handlers   Nishanth Menon
• [PATCH] ARM: Set proper TEXT_OFFSET for newer MSMs   Stephen Boyd
• [patch 0/3] imx: Efika: Add pata device   Arnaud Patard (Rtp)
• [patch 1/3] imx51: add pata device   Arnaud Patard (Rtp)
• [patch 2/3] imx51: add pata clock   Arnaud Patard (Rtp)
• [patch 3/3] imx: efika: Enable pata.   Arnaud Patard (Rtp)
• Status of AHCI support for iMX53 and for loco board   Arnaud Patard (Rtp)
• [PATCH] ARM: Set proper TEXT_OFFSET for newer MSMs   Nicolas Pitre
• [PATCH] ARM: Set proper TEXT_OFFSET for newer MSMs   Stephen Boyd
• [PATCH] Documentation: Document ARM's user_debug parameter   Stephen Boyd
• [RESEND] [PATCH V4 0/14] To use DMA generic APIs for Samsung DMA   Boojin Kim
• [PATCH V4 01/14] DMA: PL330: Add support runtime PM for PL330 DMAC   Boojin Kim
• [PATCH V4 02/14] DMA: PL330: Update PL330 DMA API driver   Boojin Kim
• [PATCH V4 03/14] DMA: PL330: Support DMA_SLAVE_CONFIG command   Boojin Kim
• [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability   Boojin Kim
• [PATCH V4 05/14] ARM: SAMSUNG: Update to use PL330-DMA driver   Boojin Kim
• [PATCH V4 06/14] ARM: SAMSUNG: Add common DMA operations   Boojin Kim
• [PATCH V4 07/14] ARM: EXYNOS4: Use generic DMA PL330 driver   Boojin Kim
• [PATCH V4 08/14] ARM: S5PV210: Use generic DMA PL330 driver   Boojin Kim
• [PATCH V4 09/14] ARM: S5PC100: Use generic DMA PL330 driver   Boojin Kim
• [PATCH V4 10/14] ARM: S5P64X0: Use generic DMA PL330 driver   Boojin Kim
• [PATCH V4 11/14] ARM: SAMSUNG: Remove S3C-PL330-DMA driver   Boojin Kim
• [PATCH V4 12/14] spi/s3c64xx: Add support DMA engine API   Boojin Kim
• [PATCH V4 13/14] ASoC: Samsung: Update DMA interface   Boojin Kim
• [PATCH V4 14/14] ARM: SAMSUNG: Remove Samsung specific enum type for dma direction   Boojin Kim
• [PATCH V4 03-1/13] DMA: PL330: Support DMA_SLAVE_CONFIG command   Boojin Kim
• linux-next: merge error in arch/arm/mm/Kconfig?   Shawn Guo
• linux-next: merge error in arch/arm/mm/Kconfig?   Stephen Rothwell
• linux-next: merge error in arch/arm/mm/Kconfig?   Stephen Rothwell
• linux-next: merge error in arch/arm/mm/Kconfig?   Shawn Guo
• [PATCH v6 0/6] mc13783: add pwr button support   Philippe Rétornaz
• [PATCH v2 0/6] ARM: mx28: add usb host function   Tony Lin
• [PATCH v2 1/6] ARM: mxs: ehci: consolidate definitions and structures to share among platforms   Tony Lin
• [PATCH v2 2/6] ARM: mxs: enable usb1 phy power supply   Tony Lin
• [PATCH v2 3/6] ARM: mxs: add usb clocks to clock tree   Tony Lin
• [PATCH v2 4/6] ARM: mxs: make ehci-mxc more flexible to be used on different platforms   Tony Lin
• [PATCH v2 5/6] ARM: mxs: add usb phy operations   Tony Lin
• [PATCH v2 6/6] ARM: mxs: add usb host function to default config   Tony Lin
• [PATCH v6 0/6] mc13783: add pwr button support   Wanlong Gao
• [PATCH v6 0/6] mc13783: add pwr button support   Shawn Guo
• [PATCH v2 5/6] ARM: mxs: add usb phy operations   Lothar Waßmann
• [PATCH v2 4/6] ARM: mxs: make ehci-mxc more flexible to be used on different platforms   Lothar Waßmann
• [PATCH v2 5/6] ARM: mxs: add usb phy operations   Lin Tony-B19295
• [PATCH v2 5/6] ARM: mxs: add usb phy operations   Russell King - ARM Linux
• [PATCH 2/2 V2] OMAP3+: PM: SR: add suspend/resume handlers   Felipe Balbi
• [PATCH V4 02/14] DMA: PL330: Update PL330 DMA API driver   Jassi Brar
• [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability   Russell King - ARM Linux
• [PATCH V4 06/14] ARM: SAMSUNG: Add common DMA operations   Russell King - ARM Linux
• [PATCH V4 12/14] spi/s3c64xx: Add support DMA engine API   Russell King - ARM Linux
• [PATCH] net/smsc911x: add device tree probe support   Shawn Guo
• [PATCH V4 02/14] DMA: PL330: Update PL330 DMA API driver   Boojin Kim
• [PATCH V4 06/14] ARM: SAMSUNG: Add common DMA operations   Boojin Kim
• [PATCH] ARM: mx5: fix remaining unconsistent names for irqs   Uwe Kleine-König
• [RESEND] [PATCH V4 0/14] To use DMA generic APIs for Samsung DMA   Vinod Koul
• IRQCHIP_MASK_ON_SUSPEND and the gic   Santosh Shilimkar
• [PATCH v2 3/6] ARM: mxs: add usb clocks to clock tree   Sergei Shtylyov
• [PATCH V4 03/14] DMA: PL330: Support DMA_SLAVE_CONFIG command   Vinod Koul
• [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability   Boojin Kim
• [PATCH 1/1 V2] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Russell King - ARM Linux
• [PATCH V4 12/14] spi/s3c64xx: Add support DMA engine API   Boojin Kim
• [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability   Russell King - ARM Linux
• [PATCH v2 3/6] ARM: mxs: add usb clocks to clock tree   Lin Tony-B19295
• [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability   Vinod Koul
• [PATCH V4 05/14] ARM: SAMSUNG: Update to use PL330-DMA driver   Vinod Koul
• [RFC] DMAEngine: Define generic transfer request api   Linus Walleij
• [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability   Russell King - ARM Linux
• [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability   Vinod Koul
• [RESEND] [PATCH V4 0/14] To use DMA generic APIs for Samsung DMA   Vinod Koul
• [PATCH V4 12/14] spi/s3c64xx: Add support DMA engine API   Vinod Koul
• [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability   Jassi Brar
• [RFC] DMAEngine: Define generic transfer request api   Vinod Koul
• [PATCH V4 05/14] ARM: SAMSUNG: Update to use PL330-DMA driver   Jassi Brar
• [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability   Russell King - ARM Linux
• [PATCH v2 0/3] Add device tree probe for imx-sdma driver   Vinod Koul
• [PATCH V4 06/14] ARM: SAMSUNG: Add common DMA operations   Jassi Brar
• [PATCH V4 07/14] ARM: EXYNOS4: Use generic DMA PL330 driver   Jassi Brar
• [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability   Vinod Koul
• [PATCH V4 14/14] ARM: SAMSUNG: Remove Samsung specific enum type for dma direction   Jassi Brar
• [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability   Boojin Kim
• [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability   Boojin Kim
• [PATCH 3/4] ARM: CPU hotplug: pass in proper affinity mask on IRQ migration   Santosh Shilimkar
• [PATCH V4 03/14] DMA: PL330: Support DMA_SLAVE_CONFIG command   Boojin Kim
• [PATCH V4 07/14] ARM: EXYNOS4: Use generic DMA PL330 driver   Boojin Kim
• [PATCH 0/4] Fix CPU hotplug IRQ migration   Santosh Shilimkar
• [PATCH 3/4] ARM: CPU hotplug: pass in proper affinity mask on IRQ migration   Russell King - ARM Linux
• [RFC] DMAEngine: Define generic transfer request api   Jaswinder Singh
• [PATCH v2 2/6] arm: davinci: Explicitly set channel controllers' default queues   Nori, Sekhar
• [PATCH] OMAP: omap_device: make latency autoadjust messages debug   Grazvydas Ignotas
• [PATCH v2 3/6] arm: davinci: mmc: Add support for set_power callback   Nori, Sekhar
• [PATCH v2 5/6] arm: davinci: DA850: Add GPIO pinmux configuration for wl1271   Nori, Sekhar
• [PATCH 0/4] Fix CPU hotplug IRQ migration   Russell King - ARM Linux
• [PATCH v2 2/6] arm: davinci: Explicitly set channel controllers' default queues   Sergei Shtylyov
• [PATCH] mtd/m25p80: add device tree probe support   Shawn Guo
• [PATCH 0/9] PL08x further cleanups   Vinod Koul
• [PATCH] OMAP3: NAND: Adding NAND support and specifying NAND partitions.   Hrishikesh Bhandiwad
• [PATCH 0/9] PL08x further cleanups   Russell King - ARM Linux
• [PATCH V4 03/14] DMA: PL330: Support DMA_SLAVE_CONFIG command   Vinod Koul
• [PATCH 0/9] PL08x further cleanups   Vinod Koul
• [PATCH 0/9] PL08x further cleanups   Vinod Koul
• [RFC] DMAEngine: Define generic transfer request api   Jaswinder Singh
• at91sam9g45: Issues while working with RAM that is separated on physical address space   P J
• [RFC] DMAEngine: Define generic transfer request api   Jaswinder Singh
• [PATCH 0/9] PL08x further cleanups   Russell King - ARM Linux
• [PATCH] dmaengine: pl330: make platform data optional   Vinod Koul
• [PATCH 1/1] ARM: mxs-dma: reset after disable channel   Vinod Koul
• [PATCH 0/4] Fix CPU hotplug IRQ migration   Santosh Shilimkar
• [PATCH] dmaengine: add helper function for slave_single   Vinod Koul
• [RFC] DMAEngine: Define generic transfer request api   Jaswinder Singh
• [PATCH 0/9] PL08x further cleanups   Vinod Koul
• [PATCH 0/4] Fix CPU hotplug IRQ migration   Russell King - ARM Linux
• [PATCH] dmaengine: pl330: make platform data optional   Jassi Brar
• [PATCH 0/4] Fix CPU hotplug IRQ migration   Santosh Shilimkar
• [PATCH 0/2] Add device tree support for i.mx53 boards   Shawn Guo
• [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Shawn Guo
• [PATCH 2/2] arm/mx5: add device tree support for imx53 boards   Shawn Guo
• [PATCH v2 0/3] Add device tree probe for imx-sdma driver   Shawn Guo
• [PATCH] dmaengine: add helper function for slave_single   Vinod Koul
• [PATCH] dmaengine: add helper function for slave_single   Russell King - ARM Linux
• [PATCH 1/2] ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SOUND_SOC   Uwe Kleine-König
• [PATCH 2/2] ARM: tegra: enable rtc driver in defconfig   Uwe Kleine-König
• [GIT PULL] Basic arm device tree support patches for v3.1   Grant Likely
• [PATCH v3 2/3] mmc: core: add random fault injection   Akinobu Mita
• [PATCH 0/3] Add device tree based initialisation for VIC   Jamie Iles
• [PATCH 1/3] vic: add device tree bindings   Jamie Iles
• [PATCH 2/3] versatile dt: set the irq-start property for the vic   Jamie Iles
• [PATCH 3/3] versatile: convert to common VIC DT probing   Jamie Iles
• [PATCH 1/2] ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SOUND_SOC   Stephen Warren
• [GIT PULL] arm-soc fixes for 3.1   Arnd Bergmann
• [PATCH] ARM: alignment: Prevent ignoring of faults with ARMv6 unaligned access model   Dave Martin
• [PATCH v2 2/6] arm: davinci: Explicitly set channel controllers' default queues   Nori, Sekhar
• [PATCH 2/2 V2] OMAP3+: PM: SR: add suspend/resume handlers   Menon, Nishanth
• [PATCH 2/2 V2] OMAP3+: PM: SR: add suspend/resume handlers   Felipe Balbi
• [PATCHv2 1/2] ARM: Set proper TEXT_OFFSET for newer MSMs   Stephen Boyd
• [PATCHv2 2/2] ARM: ARM_PATCH_PHYS_VIRT_16BIT no longer depends on MSM   Stephen Boyd
• [PATCH v2] i2c: QUP based bus driver for Qualcomm MSM chipsets   David Brown
• [PATCH v2 6/6] arm: davinci: DA850: Add wl1271/wlan support   Nori, Sekhar
• [PATCH 2/2 V2] OMAP3+: PM: SR: add suspend/resume handlers   Menon, Nishanth
• cpu_suspend does not flush the L2 cache   Scott Williams
• [PATCH 1/6] microblaze: move pci flag functions into asm-generic   Ram Pai
• [PATCH v3 2/3] mmc: core: add random fault injection   Per Forlin
• [PATCH] ARM: mx50: Select IMX_HAVE_PLATFORM_FEC as done on other i.MX devices   Fabio Estevam
• [PATCH 0/3] Add device tree based initialisation for VIC   Grant Likely
• [PATCH V2 0/7] ARM: S5P64X0: Add Framebuffer support   Ajay Kumar
• [PATCH RESEND 1/7] video: s3c-fb: Add S5P64X0 specific s3c_fb_driverdata   Ajay Kumar
• [PATCH V2 2/7] ARM: S5P64X0: Add register base and IRQ for Framebuffer   Ajay Kumar
• [PATCH RESEND 3/7] ARM: S5P64X0: Set s3c_device_fb name   Ajay Kumar
• [PATCH V2 4/7] ARM: S5P64X0: Add GPIO and SPCON settings for LCD   Ajay Kumar
• [PATCH V2 5/7] ARM: S5P64X0: Add file to hold common Framebuffer and LCD code   Ajay Kumar
• [PATCH V2 6/7] ARM: S5P6440: Enable LCD-LTE480 and Framebuffer support   Ajay Kumar
• [PATCH V2 7/7] ARM: S5P6450: Enable LCD-LTE480 and Framebuffer support   Ajay Kumar
• [PATCH 1/3] vic: add device tree bindings   Grant Likely
• cpu_suspend does not flush the L2 cache   Russell King - ARM Linux
• [PATCHv2 2/2] ARM: ARM_PATCH_PHYS_VIRT_16BIT no longer depends on MSM   Nicolas Pitre
• [PATCHv2 2/2] ARM: ARM_PATCH_PHYS_VIRT_16BIT no longer depends on MSM   Russell King - ARM Linux
• [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Grant Likely
• [PATCH] ARM: board-mx51_babbage: Fix UART2 registration   Fabio Estevam
• [PATCH] ARM: S3C64XX: Hook up GPIO initiated DVS on Cragganmore   Mark Brown
• [PATCH 2/2] arm/mx5: add device tree support for imx53 boards   Grant Likely
• [PATCH v2] dmaengine: pl330: make platform data optional   Rob Herring
• [PATCH 2/3] dmaengine: at_hdmac: improve power management routines   Nicolas Ferre
• please add MACH_APF9328 to mach-types   Uwe Kleine-König
• [PATCH V2 3/3] dmaengine: at_hdmac: add wrappers for testing channel state   Nicolas Ferre
• [PATCH 3/3] dmaengine: at_hdmac: add slave config operation   Nicolas Ferre
• [PATCH 1/2] ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SOUND_SOC   Uwe Kleine-König
• [PATCH] ARM: mx50: Select IMX_HAVE_PLATFORM_FEC as done on other i.MX devices   Uwe Kleine-König
• [PATCH V4 14/14] ARM: SAMSUNG: Remove Samsung specific enum type for dma direction   Grant Likely
• [PATCH] mtd/m25p80: add device tree probe support   Grant Likely
• [PATCH v3 2/3] mmc: core: add random fault injection   Per Forlin
• [PATCH 1/1 V2] Add Thread Support for the Context ID Register of ARM v6 & v7 Architectures   Will Deacon
• [PATCH] Documentation: Document ARM's user_debug parameter   Randy Dunlap
• cpu_suspend does not flush the L2 cache   Will Deacon
• [PATCH] net/smsc911x: add device tree probe support   Grant Likely
• [PATCH v2] ARM: mx50: Select IMX_HAVE_PLATFORM_FEC as done on other i.MX devices   Fabio Estevam
• [PATCH] ARM: cache: detect PIPT I-cache using CTR   Will Deacon
• [PATCH 0/3] Add device tree based initialisation for VIC   Jamie Iles
• [PATCH 1/3] vic: add device tree bindings   Jamie Iles
• [PATCH 2/2 V2] OMAP3+: PM: SR: add suspend/resume handlers   Felipe Balbi
• [PATCH] net/smsc911x: add device tree probe support   Shawn Guo
• [PATCH] net/smsc911x: add device tree probe support   Nicolas Pitre
• [PATCH] net/smsc911x: add device tree probe support   Shawn Guo
• [PATCH v3 2/3] mmc: core: add random fault injection   Akinobu Mita
• [Lguest] Current state of the lguest arm patch   Rusty Russell
• [PATCH v2 5/6] ARM: mxs: add usb phy operations   Lin Tony-B19295
• [PATCH] net/smsc911x: add device tree probe support   Nicolas Pitre
• [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Shawn Guo
• [PATCH v2] dmaengine: pl330: make platform data optional   Jassi Brar
• [PATCH V4 01/14] DMA: PL330: Add support runtime PM for PL330 DMAC   Chanwoo Choi
• [PATCH] ARM: EXYNOS4: Change the pwm device name to supprot clkdev   jhbird.choi at samsung.com
• Status of AHCI support for iMX53 and for loco board   Zhu Richard-R65037
• [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Sascha Hauer
• [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Sascha Hauer
• [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Sascha Hauer
• [PATCH 0/8] ARM: SAMSUNG: Add common PWM Backlight support   Dmitry Eremin-Solenikov
• [PATCH v2 0/2] set_ios handle vmmc   Zhangfei Gao
• [PATCH 1/2] mmc: sdhci move vmmc to set_ios   Zhangfei Gao
• [PATCH 2/2] ARM: mmp2: support sdio device 8787   Zhangfei Gao
• [PATCH v2 5/6] ARM: mxs: add usb phy operations   Koen Beel
• [PATCH v2 5/6] ARM: mxs: add usb phy operations   Lin Tony-B19295
• [PATCH] lib/genalloc: fix gen_pool_virt_to_phys locking   Leo Yan
• [PATCH] ARM: mx50: Select IMX_HAVE_PLATFORM_FEC as done on other i.MX devices   Sascha Hauer
• [PATCH] ARM: board-mx51_babbage: Fix UART2 registration   Sascha Hauer
• [PATCH v2] ARM: mx50: Select IMX_HAVE_PLATFORM_FEC as done on other i.MX devices   Sascha Hauer
• [patch 2/3] imx51: add pata clock   Sascha Hauer
• [PATCH] Improve slave/cyclic DMA engine documentation (was: [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability)   Russell King - ARM Linux
• [PATCH V2 5/7] ARM: S5P64X0: Add file to hold common Framebuffer and LCD code   Russell King - ARM Linux
• [PATCH V4 06/14] ARM: SAMSUNG: Add common DMA operations   Russell King - ARM Linux
• [RFC PATCH 0/2] add pinmux and gpio for CSR SiRFprimaII   Barry Song
• [RFC PATCH 1/2] ARM: CSR: Add pinmux support for SiRFprimaII   Barry Song
• [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller   Barry Song
• [PATCH v2] ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC   Uwe Kleine-König
• [PATCH] Documentation: Document ARM's user_debug parameter   Dave Martin
• [PATCH] ARM: EXYNOS4: Add support power-domain of EXYNOS4210 on NURI board   Chanwoo Choi
• [PATCH] ARM: EXYNOS4: Fix wrong devname to support clkdev   jhbird.choi at samsung.com
• [PATCH V4 12/14] spi/s3c64xx: Add support DMA engine API   Boojin Kim
• [PATCH V4 06/14] ARM: SAMSUNG: Add common DMA operations   Boojin Kim
• [PATCH] Improve slave/cyclic DMA engine documentation (was: [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability)   Vinod Koul
• [PATCH] OMAP3: NAND: Adding NAND support and specifying NAND partitions.   Grazvydas Ignotas
• [PATCH v3 1/2] irq: add irq_domain translation infrastructure   Grant Likely
• [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller   Russell King - ARM Linux
• [PATCH V4 12/14] spi/s3c64xx: Add support DMA engine API   Vinod Koul
• PLEA: Please fix mach/gpio.h includes (was: Re: [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller)   Russell King - ARM Linux
• [PATCH v2] dmaengine: pl330: make platform data optional   Vinod Koul
• [PATCH 2/3] dmaengine: at_hdmac: improve power management routines   Vinod Koul
• [RFC][PATCH] spi: s3c64xx: Use clkdev for bus clock lookup   Padmavathi Venna
• [PATCH] OMAP3: NAND: Adding NAND support and specifying NAND partitions.   Bhandiwad, Hrishikesh
• at91sam9g45: Issues while working with RAM that is separated on physical address space   P J
• [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Eric Miao
• [RFC PATCH 17/17] ARM: kernel: save/restore build infrastructure   Amit Kachhap
• [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability   Boojin Kim
• [PATCH 1/8] ARM: dma-mapping: remove offset parameter to prepare for generic dma_ops   Marek Szyprowski
• [PATCH V4 03/14] DMA: PL330: Support DMA_SLAVE_CONFIG command   Boojin Kim
• [PATCH V3 01/19] OMAP3: hwmod: add SmartReflex IRQs   Felipe Balbi
• [PATCH V3 02/19] OMAP3+: voltage: fix build warning   Felipe Balbi
• [PATCH V4 03/14] DMA: PL330: Support DMA_SLAVE_CONFIG command   Russell King - ARM Linux
• [PATCH V3 03/19] OMAP3+: voltage: remove initial voltage   Felipe Balbi
• [PATCH V3 04/19] OMAP3+: voltage: remove spurious pr_notice for debugfs   Felipe Balbi
• [PATCH V3 05/19] OMAP3+: voltage: use IS_ERR_OR_NULL   Felipe Balbi
• [PATCH] Improve slave/cyclic DMA engine documentation (was: [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability)   Russell King - ARM Linux
• at91sam9g45: Issues while working with RAM that is separated on physical address space   Christian Glindkamp
• at91sam9g45: Issues while working with RAM that is separated on physical address space   Russell King - ARM Linux
• [PATCH] genirq: move mask_cache into struct irq_chip_type   Simon Guinot
• [PATCH v2] ARM: alignment: Prevent ignoring of faults with ARMv6 unaligned access model   Dave Martin
• [PATCH 1/2] ARM: alignment: Make SIGBUS sent to userspace POSIXly correct   Dave Martin
• [PATCH 1/2] ARM: alignment: Make SIGBUS sent to userspace POSIXly correct   Dave Martin
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Koen Beel
• [PATCH] genirq: move mask_cache into struct irq_chip_type   saeed bishara
• [PATCH] Improve slave/cyclic DMA engine documentation (was: [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability)   Jassi Brar
• [PATCH] USB: s3c2410_udc: fix unterminated platform_device_id table   Sebastian Andrzej Siewior
• [PATCH] USB: s3c2410_udc: fix unterminated platform_device_id table   Felipe Balbi
• [PATCH] USB: s3c2410_udc: fix unterminated platform_device_id table   Felipe Balbi
• [patch 0/3] imx: Efika: Add pata device   Arnaud Patard (Rtp)
• [patch 1/3] imx51: add pata device   Arnaud Patard (Rtp)
• [patch 2/3] imx51: add pata clock   Arnaud Patard (Rtp)
• [patch 3/3] imx: efika: Enable pata.   Arnaud Patard (Rtp)
• [PATCH] genirq: move mask_cache into struct irq_chip_type   Simon Guinot
• [PATCH v2] ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC   Stephen Warren
• at91sam9g45: Issues while working with RAM that is separated on physical address space   P J
• [PATCH 1/2] ARM: alignment: Make SIGBUS sent to userspace POSIXly correct   Kirill A. Shutemov
• [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Shawn Guo
• [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Shawn Guo
• [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Shawn Guo
• [PATCH 1/2] ARM: alignment: Make SIGBUS sent to userspace POSIXly correct   Dave Martin
• [PATCH] Improve slave/cyclic DMA engine documentation (was: [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability)   Russell King - ARM Linux
• [GIT PULL] i.mx driver device tree patches for 3.1   Shawn Guo
• [PATCHv2 2/2] ARM: ARM_PATCH_PHYS_VIRT_16BIT no longer depends on MSM   Stephen Boyd
• [PATCH V4 06/14] ARM: SAMSUNG: Add common DMA operations   Jassi Brar
• [PATCH 1/2] ARM: alignment: Make SIGBUS sent to userspace POSIXly correct   Kirill A. Shutemov
• [PATCH] Improve slave/cyclic DMA engine documentation (was: [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability)   Jassi Brar
• [RFC] ARM Subarchitecture group maintainership   Stephen Boyd
• [PATCH] Improve slave/cyclic DMA engine documentation (was: [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability)   Grant Likely
• [PATCH V4 06/14] ARM: SAMSUNG: Add common DMA operations   Russell King - ARM Linux
• [PATCH] Improve slave/cyclic DMA engine documentation (was: [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability)   Russell King - ARM Linux
• [PATCHv2 2/2] ARM: ARM_PATCH_PHYS_VIRT_16BIT no longer depends on MSM   Nicolas Pitre
• PLEA: Please fix mach/gpio.h includes (was: Re: [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller)   Colin Cross
• PLEA: Please fix mach/gpio.h includes (was: Re: [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller)   Russell King - ARM Linux
• PLEA: Please fix mach/gpio.h includes (was: Re: [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller)   Nicolas Pitre
• [PATCH V4 06/14] ARM: SAMSUNG: Add common DMA operations   Jassi Brar
• [PATCH v3 2/3] mmc: core: add random fault injection   Per Forlin
• [PATCH v3 2/3] mmc: core: add random fault injection   Per Forlin
• [PATCH v4 0/3] Make fault injection available for MMC IO   Per Forlin
• [PATCH v4 1/3] fault-inject: make fault injection available for modules   Per Forlin
• [PATCH v4 2/3] mmc: core: add random fault injection   Per Forlin
• [PATCH v4 3/3] fault injection: add documentation on MMC IO fault injection   Per Forlin
• [PATCH 1/2] ARM: alignment: Make SIGBUS sent to userspace POSIXly correct   Kirill A. Shutemov
• [PATCH 1/2] ARM: alignment: Make SIGBUS sent to userspace POSIXly correct   Nicolas Pitre
• [PATCH v2] ARM: alignment: Prevent ignoring of faults with ARMv6 unaligned access model   Nicolas Pitre
• [PATCH v2] ARM: alignment: Prevent ignoring of faults with ARMv6 unaligned access model   Russell King - ARM Linux
• [PATCHv2 2/2] ARM: ARM_PATCH_PHYS_VIRT_16BIT no longer depends on MSM   David Brown
• at91sam9g45: Issues while working with RAM that is separated on physical address space   Nicolas Pitre
• [PATCH v2] ARM: alignment: Prevent ignoring of faults with ARMv6 unaligned access model   Nicolas Pitre
• [PATCHv2 2/2] ARM: ARM_PATCH_PHYS_VIRT_16BIT no longer depends on MSM   Nicolas Pitre
• [GIT PULL] arm-soc new SOCs for 3.1   Arnd Bergmann
• [PATCH v2] ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC   Colin Cross
• [PATCH v4 2/3] mmc: core: add random fault injection   Akinobu Mita
• [linux-pm] [RFC/PATCH v2] PM / Runtime: allow _put_sync() from interrupts-disabled context   Kevin Hilman
• [GIT PULL] arm-soc new features (part 2/2) for 3.1   Linus Torvalds
• [PATCH V4 06/14] ARM: SAMSUNG: Add common DMA operations   Jassi Brar
• [RFC] ARM Subarchitecture group maintainership   Barry Song
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• [GIT PULL] i.mx driver device tree patches for 3.1   Shawn Guo
• PLEA: Please fix mach/gpio.h includes (was: Re: [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller)   Barry Song
• [PATCH] usb/ehci-mxc: add missing inclusion of mach/hardware.h   Shawn Guo
• [PATCHv3 1/2] ARM: Set proper TEXT_OFFSET for newer MSMs   Stephen Boyd
• [PATCHv3 2/2] ARM: P2V: Remove ARM_PATCH_PHYS_VIRT_16BIT   Stephen Boyd
• [RFC] ARM Subarchitecture group maintainership   Stephen Boyd
• [PATCH] Improve slave/cyclic DMA engine documentation (was: [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability)   Vinod Koul
• PLEA: Please fix mach/gpio.h includes (was: Re: [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller)   Nicolas Pitre
• [PATCH] arm: exynos4: Fix write to nonexistent TCMPB4 PWM register on samsung exynos4 platform   Kyungmin Park
• [PATCH] ARM: exynos4: Add TWD base address   Kyungmin Park
• [PATCH v4] davinci: da850 EVM: read mac address from SPI flash   Nori, Sekhar
• [PATCH V4 12/14] spi/s3c64xx: Add support DMA engine API   Boojin Kim
• [PATCH V4 06/14] ARM: SAMSUNG: Add common DMA operations   Boojin Kim
• [PATCH v3 0/6] ARM: mx28: add usb host function   Tony Lin
• [PATCH v3 1/6] ARM: mxs: ehci: consolidate definitions and structures to share among platforms   Tony Lin
• [PATCH v3 2/6] ARM: mxs: enable usb1 phy power supply   Tony Lin
• [PATCH v3 3/6] ARM: mxs: add usb clocks to clock tree   Tony Lin
• [PATCH v3 4/6] ARM: mxs: make ehci-mxc more flexible to be used on different platforms   Tony Lin
• [PATCH v3 5/6] ARM: mxs: add usb phy operations   Tony Lin
• [PATCH v3 6/6] ARM: mxs: add usb host function to default config   Tony Lin
• [PATCH V5 00/15] To use DMA generic APIs for Samsung DMA   Boojin Kim
• [PATCH 01/15] DMA: PL330: Add support runtime PM for PL330 DMAC   Boojin Kim
• [PATCH 02/15] DMA: PL330: Update PL330 DMA API driver   Boojin Kim
• [PATCH 03/15] DMA: PL330: Support DMA_SLAVE_CONFIG command   Boojin Kim
• [PATCH 04/15] DMA: PL330: Add DMA_CYCLIC capability   Boojin Kim
• [PATCH 05/15] ARM: SAMSUNG: Update to use PL330-DMA driver   Boojin Kim
• [PATCH 06/15] ARM: SAMSUNG: Add common DMA operations   Boojin Kim
• [PATCH 07/15] ARM: EXYNOS4: Use generic DMA PL330 driver   Boojin Kim
• [PATCH 08/15] ARM: S5PV210: Use generic DMA PL330 driver   Boojin Kim
• [PATCH 09/15] ARM: S5PC100: Use generic DMA PL330 driver   Boojin Kim
• [PATCH 10/15] ARM: S5P64X0: Use generic DMA PL330 driver   Boojin Kim
• [PATCH 11/15] ARM: SAMSUNG: Remove S3C-PL330-DMA driver   Boojin Kim
• [PATCH 12/15] spi/s3c64xx: Add support DMA engine API   Boojin Kim
• [PATCH 13/15] spi/s3c64xx: Merge dma control code   Boojin Kim
• [PATCH 14/15] ASoC: Samsung: Update DMA interface   Boojin Kim
• [PATCH 15/15] ARM: SAMSUNG: Remove Samsung specific enum type for dma direction   Boojin Kim
• [RFC PATCH] DMA: PL330: Update PL330 DMAC to support runtime PM   Chanwoo Choi
• [PATCH 1/1] fix card interrupt losing issue on freescale eSDHC   Lin Tony-B19295
• [RFC PATCH] DMA: PL330: Update PL330 DMAC to support runtime PM   Jassi Brar
• [PATCH 01/15] DMA: PL330: Add support runtime PM for PL330 DMAC   Jassi Brar
• [PATCH 1/1] fix card interrupt losing issue on freescale eSDHC   Uwe Kleine-König
• [PATCH V4 06/14] ARM: SAMSUNG: Add common DMA operations   Jassi Brar
• [PATCH v3 5/6] ARM: mxs: add usb phy operations   Sascha Hauer
• [PATCH v3 5/6] ARM: mxs: add usb phy operations   Lin Tony-B19295
• [PATCH v3 4/6] ARM: mxs: make ehci-mxc more flexible to be used on different platforms   Marc Kleine-Budde
• please add MACH_APF9328 to mach-types   Russell King - ARM Linux
• please add MACH_APF9328 to mach-types   Uwe Kleine-König
• [RFC PATCH] ARM ASoC: add sound driver for imx27pdk using mc13783 codec   Philippe Rétornaz
• [GIT PULL] i.mx driver device tree patches for 3.1   Sascha Hauer
• [PATCH] genirq: move mask_cache into struct irq_chip_type   saeed bishara
• [RFC PATCH 17/17] ARM: kernel: save/restore build infrastructure   Lorenzo Pieralisi
• [PATCH v3 5/6] ARM: mxs: add usb phy operations   Lothar Waßmann
• [RFC PATCH] DMA: PL330: Update PL330 DMAC to support runtime PM   Russell King - ARM Linux
• [PATCH 0/8] ARM: SAMSUNG: Add common PWM Backlight support   Banajit Goswami
• [PATCH v3 5/6] ARM: mxs: add usb phy operations   Marc Kleine-Budde
• [PATCH] Improve slave/cyclic DMA engine documentation (was: [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability)   Russell King - ARM Linux
• [PATCH v3 0/6] ARM: mx28: add usb host function   Marc Kleine-Budde
• [PATCH v4 2/3] mmc: core: add random fault injection   Per Forlin
• [PATCH] Improve slave/cyclic DMA engine documentation (was: [PATCH V4 04/14] DMA: PL330: Add DMA_CYCLIC capability)   Koul, Vinod
• [PATCH v3 5/6] ARM: mxs: add usb phy operations   Lin Tony-B19295
• [PATCH v3 0/6] ARM: mx28: add usb host function   Lin Tony-B19295
• [linux-pm] [RFC/PATCH v2] PM / Runtime: allow _put_sync() from interrupts-disabled context   Rafael J. Wysocki
• [PATCH v3 5/6] ARM: mxs: add usb phy operations   Lothar Waßmann
• [PATCH 1/1] fix card interrupt losing issue on freescale eSDHC   Lin Tony-B19295
• [PATCH 1/1] fix card interrupt losing issue on freescale eSDHC   Arnaud Patard (Rtp)
• [RFC PATCH] DMA: PL330: Update PL330 DMAC to support runtime PM   Chanwoo Choi
• [PATCH v2] ARM: alignment: Prevent ignoring of faults with ARMv6 unaligned access model   Dave Martin
• [PATCHv4 01/11] atomic: add *_dec_not_zero   Sven Eckelmann
• [PATCH v2] OMAP: ctrl: Fix CONTROL_DSIPHY register fields   Santosh Shilimkar
• [PATCH v2] OMAP: ctrl: Fix CONTROL_DSIPHY register fields   Archit Taneja
• [PATCH v6 0/6] mc13783: add pwr button support   Samuel Ortiz
• [PATCH v4 REPOST 18/20] gpio/omap: use pm-runtime framework   DebBarma, Tarun Kanti
• [PATCH 3/8 v2] at91: remove AT91_DBGU offset from dbgu register macro   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH v2] ARM: alignment: Make SIGBUS sent to userspace POSIXly correct   Dave Martin
• [PULL] at91 init factorize   Jean-Christophe PLAGNIOL-VILLARD
• Updated mach-types update   Mark Brown
• [PATCH V2 1/3] dmaengine: at_hdmac: replace spin_lock* with irqsave variants   Nicolas Ferre
• [PATCH V2 2/3] dmaengine: at_hdmac: improve power management routines   Nicolas Ferre
• [PATCH V2 3/3] dmaengine: at_hdmac: add wrappers for testing channel state   Nicolas Ferre
• [PATCH] arm: exynos4: Fix write to nonexistent TCMPB4 PWM register on samsung exynos4 platform   Sergei Shtylyov
• [RFC/PATCH 0/7] decouple platform_device from omap_device   G, Manjunath Kondaiah
• [PATCH v2] ARM: alignment: Prevent ignoring of faults with ARMv6 unaligned access model   Nicolas Pitre
• [PATCH v2] ARM: alignment: Make SIGBUS sent to userspace POSIXly correct   Nicolas Pitre
• [PATCH v2] ARM: alignment: Prevent ignoring of faults with ARMv6 unaligned access model   Dave Martin
• [PULL] at91 init factorize   Arnd Bergmann
• [PATCHv3 2/2] ARM: P2V: Remove ARM_PATCH_PHYS_VIRT_16BIT   David Brown
• [RFC] ARM Subarchitecture group maintainership   Arnd Bergmann
• [PATCHv3 2/2] ARM: P2V: Remove ARM_PATCH_PHYS_VIRT_16BIT   Nicolas Pitre
• [GIT PULL] arm-soc new features (part 2/2) for 3.1   Arnd Bergmann
• [PATCH v2] ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC   Arnd Bergmann
• [PATCH v2] ARM: alignment: Prevent ignoring of faults with ARMv6 unaligned access model   Nicolas Pitre
• [PATCH v2] ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC   Uwe Kleine-König
• [PATCH v4 2/3] mmc: core: add random fault injection   Akinobu Mita
• [PATCH] DaVinci: correct MDSTAT_STATE_MASK   Nori, Sekhar
• [PATCH v2] ARM: tegra: only select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC   Arnd Bergmann
• [PATCH V3 0/7] ARM: S5P64X0: Add Framebuffer support   Ajay Kumar
• [PATCH V3 1/7] video: s3c-fb: Add S5P64X0 specific s3c_fb_driverdata   Ajay Kumar
• [PATCH V3 2/7] ARM: S5P64X0: Add register base and IRQ for Framebuffer   Ajay Kumar
• [PATCH V3 3/7] ARM: S5P64X0: Set s3c_device_fb name   Ajay Kumar
• [PATCH V3 4/7] ARM: S5P64X0: Add GPIO and SPCON settings for LCD   Ajay Kumar
• [PATCH V3 5/7] ARM: S5P64X0: Add file to hold common Framebuffer and LCD code   Ajay Kumar
• [PATCH V3 6/7] ARM: S5P6440: Enable LCD-LTE480 and Framebuffer support   Ajay Kumar
• [PATCH V3 7/7] ARM: S5P6450: Enable LCD-LTE480 and Framebuffer support   Ajay Kumar
• [PATCHv3 2/2] ARM: P2V: Remove ARM_PATCH_PHYS_VIRT_16BIT   David Brown
• [PATCHv3 2/2] ARM: P2V: Remove ARM_PATCH_PHYS_VIRT_16BIT   Stephen Boyd
• [PATCHv4 1/2] ARM: Set proper TEXT_OFFSET for newer MSMs   Stephen Boyd
• [PATCHv4 2/2] ARM: P2V: Remove ARM_PATCH_PHYS_VIRT_16BIT   Stephen Boyd
• [PATCH v4 2/3] mmc: core: add random fault injection   Per Forlin
• [PATCH] OMAP: hwmod: add omap_hwmod_to_device   Nishanth Menon
• [PATCH 1/2] OMAP: PM: omap_device: add omap_hwmod_name_get_odev   Nishanth Menon
• [PATCH] usb/ehci-mxc: add missing inclusion of mach/hardware.h   Alan Stern
• [RFC/PATCH 0/7] decouple platform_device from omap_device   Hilman, Kevin
• [PULL] at91 init factorize   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH V4 06/14] ARM: SAMSUNG: Add common DMA operations   Boojin Kim
• [PATCH V4 14/14] ARM: SAMSUNG: Remove Samsung specific enum type for dma direction   Boojin Kim
• [RFC PATCH 0/3] ARM: Add default system.h and uncompress.h   Rob Herring
• [RFC PATCH 1/3] ARM: include mach headers before common arm headers   Rob Herring
• [RFC PATCH 2/3] ARM: add a default mach/uncompress.h header   Rob Herring
• [RFC PATCH 3/3] ARM: add a default mach/system.h header   Rob Herring
• [RFC PATCH 0/3] ARM: Add default system.h and uncompress.h   Nicolas Pitre
• [RFC/PATCH 0/7] decouple platform_device from omap_device   G, Manjunath Kondaiah
• [RFC/PATCH 2/7] OMAP3: beagle: don't touch omap_device internals   Nishanth Menon
• [PATCH v5 0/4] ASoC: mxs: add audio support   Dong Aisheng-B29396
• [PATCH v4 2/2] ARM: l2x0: Add OF based initialization   Barry Song
• [PATCH] arm: exynos4: Fix write to nonexistent TCMPB4 PWM register on samsung exynos4 platform   Evgeny Voevodin
• [RFC PATCH v9 0/4] Consolidating GIC per-cpu interrupts   Stephen Boyd
• [PATCH v2 00/07] enable devicetree on arch-mmp   Haojian Zhuang
• [PATCH v2 1/7] ARM: mmp: parse irq from DT   Haojian Zhuang
• [PATCH v2 2/7] ARM: mmp: parse timer configuration from DT   Haojian Zhuang
• [PATCH v2 3/7] ARM: mmp: support DT on both dkb and brownstone   Haojian Zhuang
• [PATCH v2 4/7] tty: serial: support device tree in pxa   Haojian Zhuang
• [PATCH v2 5/7] tty: serial: check ops before registering console   Haojian Zhuang
• [PATCH v2 6/7] i2c: pxa: support i2c controller from DT   Haojian Zhuang
• [PATCH v2 7/7] i2c: pxa: support to parse property   Haojian Zhuang
• [PATCH v2 0/1] ARM: mxc: fix card interrupt losing issue on freescale eSDHC   Tony Lin
• [PATCH v2 1/1] ARM: mxc: fix card interrupt losing issue on freescale eSDHC   Tony Lin
• [PATCH v3 5/6] ARM: mxs: add usb phy operations   Lin Tony-B19295
• [PATCH] ARM: mm: cache-l2x0: Add support for re-enabling l2x0   Barry Song
• [PATCH v4 REPOST 18/20] gpio/omap: use pm-runtime framework   Todd Poynor
• [GIT PULL] Basic arm device tree support patches for v3.1   Grant Likely
• cpu_suspend does not flush the L2 cache   Barry Song
• [RFC/PATCH 2/7] OMAP3: beagle: don't touch omap_device internals   Jean Pihet
• [RFC/PATCH 2/7] OMAP3: beagle: don't touch omap_device internals   Jean Pihet
• [PATCH v2 3/5] OMAP4: powerdomain data: Fix core mem states and missing cefuse flag   Cousson, Benoit
• [PATCH v4 REPOST 18/20] gpio/omap: use pm-runtime framework   DebBarma, Tarun Kanti
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Koen Beel
• [RFC PATCH 0/3] ARM: Add default system.h and uncompress.h   Russell King - ARM Linux
• cpu_suspend does not flush the L2 cache   Santosh Shilimkar
• [PATCH 2/3] arch: arm: mach-cns3xxx: Add gpiolib support   Russell King - ARM Linux
• [PATCH 3/3] arch: arm: mach-cns3xxx: Add external interrupt pin demo program   Russell King - ARM Linux
• [RFC/PATCH 2/7] OMAP3: beagle: don't touch omap_device internals   Russell King - ARM Linux
• [PATCH 2/3] arch: arm: mach-cns3xxx: Add gpiolib support   Jamie Iles
• [PATCH v5 0/4] ASoC: mxs: add audio support   Mark Brown
• [PATCH] lib/genalloc: fix gen_pool_virt_to_phys locking   real mz
• [PATCH v5 0/4] ASoC: mxs: add audio support   Liam Girdwood
• [PATCH v5 1/4] ASoC: mxs: add mxs-pcm driver   Mark Brown
• [PATCH v5 1/4] ASoC: mxs: add mxs-pcm driver   Dong Aisheng-B29396
• [PATCH v2] ARM: alignment: Make SIGBUS sent to userspace POSIXly correct   Kirill A. Shutemov
• [PATCH v3 5/6] ARM: mxs: add usb phy operations   Russell King - ARM Linux
• [PATCH 2/3] arch: arm: mach-cns3xxx: Add gpiolib support   林宏文
• [PATCH 5/5] ARM: s3c64xx: Add support for synchronous clock operation.   Tomasz Figa
• [PATCH 2/3] arch: arm: mach-cns3xxx: Add gpiolib support   Felipe Balbi
• [RFC/PATCH 2/7] OMAP3: beagle: don't touch omap_device internals   Cousson, Benoit
• [RFC/PATCH 2/7] OMAP3: beagle: don't touch omap_device internals   Felipe Balbi
• [PATCH 2/3] arch: arm: mach-cns3xxx: Add gpiolib support   Russell King - ARM Linux
• [RFC PATCH 0/3] ARM: Add default system.h and uncompress.h   Rob Herring
• [RFC/PATCH 2/7] OMAP3: beagle: don't touch omap_device internals   Menon, Nishanth
• [PATCH] ARM: EXYNOS4: remove duplicated #include   Huang Weiyi
• [RFC PATCH 0/3] ARM: Add default system.h and uncompress.h   Rob Herring
• [RFC PATCH 0/9] Add pdc feature to atmel-mci   ludovic.desroches at atmel.com
• [RFC PATCH 1/9] mmc: atmel-mci: change namespace   ludovic.desroches at atmel.com
• [RFC PATCH 2/9] mmc: atmel-mci: change atmci_readl and atmci_writel macros   ludovic.desroches at atmel.com
• [RFC PATCH 3/9] mmc: atmel-mci: indentation   ludovic.desroches at atmel.com
• [RFC PATCH 4/9] mmc: atmel-mci: add pdc support and runtime capabilities detection   ludovic.desroches at atmel.com
• [RFC PATCH 5/9] mmc: atmel-mci: change atmci_start_command to atmci_send_command   ludovic.desroches at atmel.com
• [RFC PATCH 6/9] atmel_pdc: add ATMEL_PDC_SCND_BUF_OFF   ludovic.desroches at atmel.com
• [RFC PATCH 7/9] mmc: atmel-mci: use ATMEL_PDC_SCND_BUF_OFF instead of a literal value   ludovic.desroches at atmel.com
• [RFC PATCH 8/9] mmc: atmel-mci: correct sg buffer size evaluation   ludovic.desroches at atmel.com
• [RFC PATCH 9/9] mmc: atmel-mci: fix a potential issue about pending PDC interrupts   ludovic.desroches at atmel.com
• [patch 1/3] imx51: add pata device   Uwe Kleine-König
• [PATCH] ARM: zynq: remove incorrectly deleted file   Arnd Bergmann
• [RFC PATCH 0/3] ARM: Add default system.h and uncompress.h   Russell King - ARM Linux
• [PULL] at91 init factorize   Arnd Bergmann
• [RFC PATCH 06/17] ARM: kernel: save/restore generic infrastructure   Amit Kachhap
• [PATCH v4 REPOST 18/20] gpio/omap: use pm-runtime framework   Todd Poynor
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Cousson, Benoit
• [PATCH v2 00/18] OMAP4: PM data big spring cleanup and fixes   Cousson, Benoit
• cpu_suspend does not flush the L2 cache   Scott Williams
• [PATCH 1/3] arch: arm: mach-cns3xxx: Fix compile error caused by hardware.h removed   Tommy Lin
• [PATCH 2/3] arch: arm: mach-cns3xxx: Add gpiolib support   Tommy Lin
• [PATCH 3/3] arch: arm: mach-cns3xxx: Add external interrupt pin demo program   Tommy Lin
• [PATCH 4/4] dt: i2c-omap: Convert i2c driver to use device tree   Cousson, Benoit
• cpu_suspend does not flush the L2 cache   Lorenzo Pieralisi
• [RFC PATCH 06/17] ARM: kernel: save/restore generic infrastructure   Lorenzo Pieralisi
• [PATCH 3/4] dt: omap3: add generic board file for dt support   Cousson, Benoit
• [PATCH 2/5] ARM: s3c64xx: DMA: Use S3C64XX_SDMA_SEL register name instead of numeric address.   Tomasz Figa
• [PATCH 1/4 v2] ARM: s3c64xx: DMA: Use S3C64XX_SDMA_SEL register name instead of numeric address.   Tomasz Figa
• [PATCH v2 6/6] arm: davinci: DA850: Add wl1271/wlan support   Ido Yariv
• [PATCH] mtd/m25p80: add device tree probe support   manu
• [PATCH 1/2] ARM: msm: Remove .boot_params from MSM boardfiles   David Brown
• [PATCH 2/2] ARM: msm: Remove PLAT_PHYS_OFFSETS from MSM targets   David Brown
• [PATCH REPOST v2] mmc: davinci: Add support for set_power callback   Ido Yariv
• [PATCH 2/2] ARM: msm: Remove PLAT_PHYS_OFFSETS from MSM targets   Nicolas Pitre
• [patch 1/2] arch/arm/mach-ux500/mbox-db5500.c: world-writable sysfs fifo file   akpm at linux-foundation.org
• [patch 2/2] arm, exec: remove redundant set_fs(USER_DS)   akpm at linux-foundation.org
• [PATCH v3] davinci: Add wl1271/wlan support for AM18x   Ido Yariv
• [PATCH 2/2] ARM: msm: Remove PLAT_PHYS_OFFSETS from MSM targets   David Brown
• [RFC] ARM: dma_map|unmap_sg plus iommu   Ramirez Luna, Omar
• [PATCH v3] davinci: Add wl1271/wlan support for AM18x   Troy Kisky
• [PATCH 4/4] dt: i2c-omap: Convert i2c driver to use device tree   Grant Likely
• [PATCH] mtd/m25p80: add device tree probe support   Grant Likely
• [GIT PULL] arm-soc fixes for 3.1, part 3   Arnd Bergmann
• [GIT PULL] arm-soc device tree conversions for 3.1   Arnd Bergmann
• [PATCH REPOST v2] mmc: davinci: Add support for set_power callback   Chris Ball
• [GIT PULL] arm soc cleanups for 3.1, part 2   Arnd Bergmann
• [PATCH v3] davinci: Add wl1271/wlan support for AM18x   Ido Yariv
• [PATCH 2/2] OMAP: PM: omap_device: add few quick access functions   Nishanth Menon
• [PATCH] mach-integrator: update defconfig   Linus Walleij
• Question about "Inconsistent kallsyms data"   Kukjin Kim
• [PATCH 0/2] Add device tree probe for i2c-imx driver   Shawn Guo
• [PATCH] lib/genalloc: fix gen_pool_virt_to_phys locking   Leo Yan
• [PATCH] net/smsc911x: add device tree probe support   Shawn Guo
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Lothar Waßmann
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Koen Beel
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Lothar Waßmann
• [RFC] ARM: dma_map|unmap_sg plus iommu   Marek Szyprowski
• [PATCH v5] ARM: Use generic BUG() handler   Simon Glass
• [PATCH v2] net/smsc911x: add device tree probe support   Shawn Guo
• [RFC] ARM: dma_map|unmap_sg plus iommu   'Joerg Roedel'
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Huang Shijie
• Question about "Inconsistent kallsyms data"   Tomasz Figa
• Question about "Inconsistent kallsyms data"   Russell King - ARM Linux
• [RFC] ARM: dma_map|unmap_sg plus iommu   Marek Szyprowski
• [PATCH 2/2] ARM: msm: Remove PLAT_PHYS_OFFSETS from MSM targets   Russell King - ARM Linux
• [PATCHv5 0/3] I2C driver updates   Shubhrajyoti D
• [PATCHv5 1/3] OMAP: I2C: Reset support   Shubhrajyoti D
• [PATCHv5 2/3] OMAP: I2C: Remove the reset in the init path   Shubhrajyoti D
• [PATCHv5 3/3] OMAP: I2C: Remove the SYSC register definition   Shubhrajyoti D
• [PATCH v4 REPOST 18/20] gpio/omap: use pm-runtime framework   DebBarma, Tarun Kanti
• [PATCH 00/18] dmaengine/amba-pl08x updates   Viresh Kumar
• [PATCH 01/18] ARM: asm/pl080.h: Protect against multiple inclusion of header file   Viresh Kumar
• [PATCH 02/18] dmaengine/amba-pl08x: Resolve formatting issues   Viresh Kumar
• [PATCH 03/18] dmaengine/amba-pl08x: Complete doc comment for struct pl08x_txd   Viresh Kumar
• [PATCH 04/18] dmaengine/amba-pl08x: Remove redundant comment and rewrite original   Viresh Kumar
• [PATCH 05/18] dmaengine/amba-pl08x: Changing few prints to dev_dbg from dev_info   Viresh Kumar
• [PATCH 06/18] dmaengine/amba-pl08x: Simplify pl08x_ensure_on()   Viresh Kumar
• [PATCH 07/18] dmaengine/amba-pl08x: Enable/Disable amba_pclk with channel requests   Viresh Kumar
• [PATCH 08/18] dmaengine/amba-pl08x: No need to check "ch->signal < 0"   Viresh Kumar
• [PATCH 09/18] dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt   Viresh Kumar
• [PATCH 10/18] dmaengine/amba-pl08x: Get rid of pl08x_pre_boundary()   Viresh Kumar
• [PATCH 11/18] dmaengine/amba-pl08x: max_bytes_per_lli is TRANSFER_SIZE * src_width (not MIN(width))   Viresh Kumar
• [PATCH 12/18] dmaengine/amba-pl08x: Add prep_single_byte_llis() routine   Viresh Kumar
• [PATCH 13/18] dmaengine/amba-pl08x: Align lli_len to max(src.width, dst.width)   Viresh Kumar
• [PATCH 14/18] dmaengine/amba-pl08x: Choose peripheral bus as master bus   Viresh Kumar
• [PATCH 15/18] dmaengine/amba-pl08x: Pass flow controller information with slave channel data   Viresh Kumar
• [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Viresh Kumar
• [PATCH 17/18] dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool   Viresh Kumar
• [PATCH 18/18] dmaengine/amba-pl08x: Call pl08x_free_txd() instead of calling kfree() directly   Viresh Kumar
• [RFC] ARM: dma_map|unmap_sg plus iommu   'Joerg Roedel'
• [PATCH v4 REPOST 18/20] gpio/omap: use pm-runtime framework   DebBarma, Tarun Kanti
• [PATCH 00/18] dmaengine/amba-pl08x updates   Russell King - ARM Linux
• Question about "Inconsistent kallsyms data"   Tomasz Figa
• [PATCH 02/18] dmaengine/amba-pl08x: Resolve formatting issues   Russell King - ARM Linux
• [PATCH 10/18] dmaengine/amba-pl08x: Get rid of pl08x_pre_boundary()   Russell King - ARM Linux
• [PATCH 12/18] dmaengine/amba-pl08x: Add prep_single_byte_llis() routine   Russell King - ARM Linux
• [PATCH 15/18] dmaengine/amba-pl08x: Pass flow controller information with slave channel data   Russell King - ARM Linux
• [PATCH 00/18] dmaengine/amba-pl08x updates   viresh kumar
• [PATCH 18/18] dmaengine/amba-pl08x: Call pl08x_free_txd() instead of calling kfree() directly   Russell King - ARM Linux
• [PATCH 00/18] dmaengine/amba-pl08x updates   Russell King - ARM Linux
• [PATCH 02/18] dmaengine/amba-pl08x: Resolve formatting issues   viresh kumar
• [PATCH 00/18] dmaengine/amba-pl08x updates   viresh kumar
• [PATCHV2 3/5] OMAP: I2C: Remove the reset in the init path   Shubhrajyoti
• [PATCH 12/18] dmaengine/amba-pl08x: Add prep_single_byte_llis() routine   viresh kumar
• Question about "Inconsistent kallsyms data"   Tomasz Figa
• [PATCH 15/18] dmaengine/amba-pl08x: Pass flow controller information with slave channel data   viresh kumar
• [PATCH 18/18] dmaengine/amba-pl08x: Call pl08x_free_txd() instead of calling kfree() directly   viresh kumar
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Koen Beel
• [PATCH 00/18] dmaengine/amba-pl08x updates   Koul, Vinod
• [PATCH 02/18] dmaengine/amba-pl08x: Resolve formatting issues   Koul, Vinod
• [PATCH 04/18] dmaengine/amba-pl08x: Remove redundant comment and rewrite original   Koul, Vinod
• [PATCH 09/18] dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt   Koul, Vinod
• [PATCH 10/18] dmaengine/amba-pl08x: Get rid of pl08x_pre_boundary()   Koul, Vinod
• [PATCH 10/18] dmaengine/amba-pl08x: Get rid of pl08x_pre_boundary()   Koul, Vinod
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Lothar Waßmann
• [PATCH 2/2] ARM: msm: Remove PLAT_PHYS_OFFSETS from MSM targets   Nicolas Pitre
• [PATCH 00/18] dmaengine/amba-pl08x updates   Russell King - ARM Linux
• [PATCH 13/18] dmaengine/amba-pl08x: Align lli_len to max(src.width, dst.width)   Koul, Vinod
• Question about "Inconsistent kallsyms data"   Arnd Bergmann
• Question about "Inconsistent kallsyms data"   Arnd Bergmann
• [PATCH 09/18] dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt   Russell King - ARM Linux
• [RFC/PATCH 2/7] OMAP3: beagle: don't touch omap_device internals   Nishanth Menon
• [PATCH 2/2] ARM: msm: Remove PLAT_PHYS_OFFSETS from MSM targets   David Brown
• [RFC/PATCH 2/7] OMAP3: beagle: don't touch omap_device internals   Felipe Balbi
• [PATCH] ARM: SAMSUNG: Fix build of new dev- infrastructure   Mark Brown
• [RFC] ARM: dma_map|unmap_sg plus iommu   Marek Szyprowski
• [PATCH v2 2/6] arm: davinci: Explicitly set channel controllers' default queues   Ben Gardiner
• [PATCH 0/5] Miscellaneous s3c64xx fixes.   Tomasz Figa
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Koen Beel
• [PATCH 00/18] dmaengine/amba-pl08x updates   viresh kumar
• [PATCH 02/18] dmaengine/amba-pl08x: Resolve formatting issues   viresh kumar
• [PATCH 09/18] dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt   viresh kumar
• [PATCH 13/18] dmaengine/amba-pl08x: Align lli_len to max(src.width, dst.width)   viresh kumar
• [PATCH 10/18] dmaengine/amba-pl08x: Get rid of pl08x_pre_boundary()   viresh kumar
• [PATCH] net/smsc911x: add device tree probe support   Grant Likely
• [PATCH 04/18] dmaengine/amba-pl08x: Remove redundant comment and rewrite original   viresh kumar
• [PATCH] net/smsc911x: add device tree probe support   Grant Likely
• [PATCH 0/5] Miscellaneous s3c64xx fixes.   Tomasz Figa
• [PATCH v2] net/smsc911x: add device tree probe support   Grant Likely
• PLEA: Please fix mach/gpio.h includes (was: Re: [RFC PATCH 2/2] GPIO: add gpiolib and irqchip for CSR SiRFprimaII GPIO controller)   Linus Walleij
• [PATCH 10/18] dmaengine/amba-pl08x: Get rid of pl08x_pre_boundary()   viresh kumar
• [PATCH 0/3] pxa2xx related pcmcia tidyups.   Dominik Brodowski
• [PATCH] net/smsc911x: add device tree probe support   Shawn Guo
• [PATCH 1/5] ARM: s3c64xx: PM: Mask and acknowledge all UART interrupts during core resume.   Tomasz Figa
• [PATCH 2/5] ARM: s3c64xx: DMA: Use S3C64XX_SDMA_SEL register name instead of numeric address.   Tomasz Figa
• [PATCH 3/5] ARM: s3c64xx: Save/restore S3C64XX_SDMA_SEL on suspend/resume.   Tomasz Figa
• [PATCH 4/5] ARM: s3c64xx: Save/restore S3C64XX_MODEM_MIFPCON on suspend/resume to preserve LCD bypass state.   Tomasz Figa
• [PATCH 5/5] ARM: s3c64xx: Add support for synchronous clock operation.   Tomasz Figa
• [PATCH v2] net/smsc911x: add device tree probe support   Shawn Guo
• [PATCH] net/smsc911x: add device tree probe support   Grant Likely
• [PATCH 04/18] dmaengine/amba-pl08x: Remove redundant comment and rewrite original   Russell King - ARM Linux
• [PATCH v2 1/7] ARM: mmp: parse irq from DT   Grant Likely
• [PATCH v2 2/7] ARM: mmp: parse timer configuration from DT   Grant Likely
• [PATCH v2 3/7] ARM: mmp: support DT on both dkb and brownstone   Grant Likely
• [PATCH v2 4/7] tty: serial: support device tree in pxa   Grant Likely
• [PATCH v2 4/7] tty: serial: support device tree in pxa   Russell King - ARM Linux
• [PATCH v2 6/7] i2c: pxa: support i2c controller from DT   Grant Likely
• [PATCH v2 4/7] tty: serial: support device tree in pxa   Grant Likely
• [PATCH v2 6/7] i2c: pxa: support i2c controller from DT   Russell King - ARM Linux
• [PATCH] net/smsc911x: add device tree probe support   Shawn Guo
• [PATCH v3] davinci: Add wl1271/wlan support for AM18x   Troy Kisky
• [RFC PATCH] ARM ASoC: add sound driver for imx27pdk using mc13783 codec   Jürgen Lambrecht
• questions about memory hotplug   Larry Bassel
• [RFC/PATCH 2/7] OMAP3: beagle: don't touch omap_device internals   Menon, Nishanth
• [RFC/PATCH 0/7] decouple platform_device from omap_device   Kevin Hilman
• [PULL] at91 init factorize   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 1/9] mmc: atmel-mci: change namespace   Jean-Christophe PLAGNIOL-VILLARD
• [RFC PATCH 6/9] atmel_pdc: add ATMEL_PDC_SCND_BUF_OFF   Jean-Christophe PLAGNIOL-VILLARD
• questions about memory hotplug   Shaohua Li
• [RFC/PATCH 7/7] WIP: HACK/RFC: omap_device: begin to decouple platform_device from omap_device   Russell King - ARM Linux
• [PATCH 07/18] dmaengine/amba-pl08x: Enable/Disable amba_pclk with channel requests   Russell King - ARM Linux
• [PATCH 07/18] dmaengine/amba-pl08x: Enable/Disable amba_pclk with channel requests   Russell King - ARM Linux
• [PATCH v2 6/7] i2c: pxa: support i2c controller from DT   Mitch Bradley
• [PATCH v2 6/7] i2c: pxa: support i2c controller from DT   Russell King - ARM Linux
• [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Zoltan Devai
• [PATCH] ARM: Do not write to read-only register of VIC   Zoltan Devai
• [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   Sergei Shtylyov
• [PATCH] Remove remaining references of CONFIG_GENERIC_TIME   richard -rw- weinberger
• [PATCH v2 0/2] Add device tree probe for i2c-imx driver   Shawn Guo
• [PATCH v2 1/2] i2c/imx: remove init/exit hooks from platform data   Shawn Guo
• [PATCH v2 2/2] i2c/imx: add device tree probe support   Shawn Guo
• [PATCH v3] net/smsc911x: add device tree probe support   Shawn Guo
• [PULL] at91 init factorize   Nicolas Pitre
• [PATCH v2 0/3] Add device tree support for i.mx51/53 boards   Shawn Guo
• [PATCH v2 1/3] arm/mx5: parse iomuxc pad configuratoin from device tree   Shawn Guo
• [PATCH v2 2/3] arm/mx5: add device tree support for imx53 boards   Shawn Guo
• [PATCH v2 3/3] arm/mx5: add device tree support for imx51 babbage   Shawn Guo
• [PATCH] usb/ehci-mxc: add missing inclusion of mach/hardware.h   Uwe Kleine-König
• [PATCH 01/18] ARM: asm/pl080.h: Protect against multiple inclusion of header file   Linus Walleij
• [PATCH 04/18] dmaengine/amba-pl08x: Remove redundant comment and rewrite original   Linus Walleij
• [PATCH 05/18] dmaengine/amba-pl08x: Changing few prints to dev_dbg from dev_info   Linus Walleij
• [PATCH 06/18] dmaengine/amba-pl08x: Simplify pl08x_ensure_on()   Linus Walleij
• [PATCH 04/18] dmaengine/amba-pl08x: Remove redundant comment and rewrite original   Russell King - ARM Linux
• [PATCH 04/18] dmaengine/amba-pl08x: Remove redundant comment and rewrite original   Linus Walleij
• [PATCH 07/18] dmaengine/amba-pl08x: Enable/Disable amba_pclk with channel requests   Linus Walleij
• [PATCH 07/18] dmaengine/amba-pl08x: Enable/Disable amba_pclk with channel requests   Linus Walleij
• [PATCH 08/18] dmaengine/amba-pl08x: No need to check "ch->signal < 0"   Linus Walleij
• [PATCH 09/18] dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt   Linus Walleij
• [PATCH 10/18] dmaengine/amba-pl08x: Get rid of pl08x_pre_boundary()   Linus Walleij
• [PATCH 11/18] dmaengine/amba-pl08x: max_bytes_per_lli is TRANSFER_SIZE * src_width (not MIN(width))   Linus Walleij
• [PATCH 13/18] dmaengine/amba-pl08x: Align lli_len to max(src.width, dst.width)   Linus Walleij
• [PATCH 14/18] dmaengine/amba-pl08x: Choose peripheral bus as master bus   Linus Walleij
• [PATCH v2 6/7] i2c: pxa: support i2c controller from DT   Grant Likely
• [PATCH 15/18] dmaengine/amba-pl08x: Pass flow controller information with slave channel data   Linus Walleij
• [PATCH 16/18] dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers   Linus Walleij
• [PATCH] net/smsc911x: add device tree probe support   Grant Likely
• [PATCH 17/18] dmaengine/amba-pl08x: Check txd->llis_va before freeing dma_pool   Linus Walleij
• [PATCH 18/18] dmaengine/amba-pl08x: Call pl08x_free_txd() instead of calling kfree() directly   Linus Walleij
• [RFC/PATCH 7/7] WIP: HACK/RFC: omap_device: begin to decouple platform_device from omap_device   Grant Likely
• [PULL] at91 init factorize   Jean-Christophe PLAGNIOL-VILLARD
• [PATCH 1/2] arm/mx5: parse iomuxc pad configuratoin from device tree   Grant Likely
• [PATCH 1/3] vic: add device tree bindings   Grant Likely
• [PATCH 09/18] dmaengine/amba-pl08x: Schedule tasklet in case of error interrupt   viresh kumar
• [PATCH 15/18] dmaengine/amba-pl08x: Pass flow controller information with slave channel data   viresh kumar
• [PATCH 18/18] dmaengine/amba-pl08x: Call pl08x_free_txd() instead of calling kfree() directly   viresh kumar
• [PATCH 04/18] dmaengine/amba-pl08x: Remove redundant comment and rewrite original   viresh kumar
• [PATCH 04/18] dmaengine/amba-pl08x: Remove redundant comment and rewrite original   Russell King - ARM Linux
• [PATCH 11/18] dmaengine/amba-pl08x: max_bytes_per_lli is TRANSFER_SIZE * src_width (not MIN(width))   Russell King - ARM Linux
• [PATCH v8 0/3] add the GPMI controller driver for IMX23/IMX28   Marek Vasut
• [PATCH] Add sched_clock to AT91 TCB clocksource driver   Remy Bohmer
• [RFC/PATCH 7/7] WIP: HACK/RFC: omap_device: begin to decouple platform_device from omap_device   Russell King - ARM Linux
• [PATCH] Add sched_clock to AT91 TCB clocksource driver   Russell King - ARM Linux
• [PULL] at91 init factorize   Russell King - ARM Linux
• [PATCH 1/3] vic: add device tree bindings   Jamie Iles
• [PATCH 07/18] dmaengine/amba-pl08x: Enable/Disable amba_pclk with channel requests   Russell King - ARM Linux
• [PULL] at91 init factorize   Nicolas Ferre
• [PATCH] ARM: SAMSUNG: Fix build of dev- infrastructure for module.h changes   Mark Brown
• [RFC] ARM: dma_map|unmap_sg plus iommu   KyongHo Cho
• [PATCH v2 1/7] ARM: mmp: parse irq from DT   Haojian Zhuang
• [PATCH v2 3/7] ARM: mmp: support DT on both dkb and brownstone   Haojian Zhuang
• [PATCH v2 4/7] tty: serial: support device tree in pxa   Haojian Zhuang
• [PATCH V2 0/2] ARM: mmp: add audio sram support   Leo Yan
• [PATCH 1/2] ARM: mmp: register audio sram device   Leo Yan
• [PATCH 2/2] ARM: mmp: add audio sram allocator   Leo Yan