[PATCH 6/7] add macro definitions according to ehci-mxc driver change

[Lothar Waßmann]

Hi,

Tony Lin writes:
> Signed-off-by: Tony Lin <tony.lin at freescale.com>
> ---
>  arch/arm/mach-mxs/include/mach/hardware.h |    2 ++
>  arch/arm/mach-mxs/include/mach/mxs.h      |   12 +++++++++++-
>  arch/arm/plat-mxc/include/mach/mxc.h      |    3 +++
>  3 files changed, 16 insertions(+), 1 deletions(-)
> 
> diff --git a/arch/arm/mach-mxs/include/mach/hardware.h b/arch/arm/mach-mxs/include/mach/hardware.h
> index 53e89a0..affa72b 100644
> --- a/arch/arm/mach-mxs/include/mach/hardware.h
> +++ b/arch/arm/mach-mxs/include/mach/hardware.h
> @@ -26,4 +26,6 @@
>  #define IOMEM(addr)	((void __force __iomem *)(addr))
>  #endif
>  
> +#include "mxs.h"
> +
>  #endif /* __MACH_MXS_HARDWARE_H__ */
> diff --git a/arch/arm/mach-mxs/include/mach/mxs.h b/arch/arm/mach-mxs/include/mach/mxs.h
> index 35a89dd..6e5928d 100644
> --- a/arch/arm/mach-mxs/include/mach/mxs.h
> +++ b/arch/arm/mach-mxs/include/mach/mxs.h
> @@ -35,7 +35,17 @@
>  		machine_is_mx28evk() ||					\
>  		machine_is_tx28() ||					\
>  		0)
> -
> +#define cpu_is_mx1()		(0)
> +#define cpu_is_mx21()		(0)
> +#define cpu_is_mx25()		(0)
> +#define cpu_is_mx27()		(0)
> +#define cpu_is_mx31()		(0)
> +#define cpu_is_mx35()		(0)
> +#define cpu_is_mx50()		(0)
> +#define cpu_is_mx51()		(0)
> +#define cpu_is_mx53()		(0)
>
No need for parens around bare numbers.



Lothar Waßmann
-- 
___________________________________________________________

Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen
Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10
Geschäftsführer: Matthias Kaussen
Handelsregistereintrag: Amtsgericht Aachen, HRB 4996

www.karo-electronics.de | info at karo-electronics.de
___________________________________________________________